Osseous integration of calcium phosphate in osteoporotic vertebral fractures after kyphoplasty: initial results from a clinical and experimental pilot study

EXPANDABLE INTRAVERTEBRAL IMPLANTS IN POST-TRAUMATIC VERTEBRAL NECROSIS - NEW CLASSIFICATION SUGGESTION

The progressive evolution of post-traumatic vertebral necrosis and consequent loss of structural integrity of the vertebral body along with neurological risk, makes it one of the most feared and unpredictable pathologies in spine traumatology. Several studies have addressed the role of vertebroplasty, kyphoplasty, and corpectomy in its treatment; however, it remains a controversial concept without a defined therapeutic algorithm. The recent emergence of expandable intravertebral implants, which allow, by a percutaneous transpedicular application, the capacity for intrasomatic filling and maintenance of the height of the vertebral body, makes them a viable option, not only in the treatment of acute vertebral fractures, but also in non-union cases. In this study, we present a review of the current evidence on the application of expandable intravertebral implants in cases of post-traumatic vertebral necrosis. Based on the available scientific literature, including previous classifications of post-traumatic necrosis, and on the mechanical characteristics of the main expandable intravertebral implants currently available, we propose a simplified classification of this pathology, considering parameters that influence surgical therapeutic guidance, the morphology and the dynamics of the necrotic vertebra's mobility. According to its stages and based on authors' experience and on the scarce literature, we propose an initial therapeutic algorithm and suggest preventive strategies for this disease, considering its main risk factors, that is, fracture comminution and impairment of vertebral vascularity. Therefore, expandable intravertebral implants have a promising role in this condition; however, large prospective studies are needed to confirm their efficacy, to clarify the indications of each of these devices, and to validate the algorithm suggestion regarding treatment and prevention of post-traumatic vertebral necrosis. Level of Evidence III, Systematic Review/Actualization.

Internal replacement of a vertebral body in pseudarthrosis-Armed kyphoplasty with bone graft-filled stents: Case report

Background

Post-traumatic vertebral necrosis and pseudarthrosis represents one of the most concerning and unpredictable challenges in spinal traumatology. The evolution of this disease at the thoracolumbar transition usually courses with progressive bone resorption and necrosis, leading to vertebral collapse, retropulsion of the posterior wall and neurological injury. As such, the therapeutic goal is the interruption of this cascade, seeking to stabilize the vertebral body and avoid the negative consequences of its collapse.

Case description

We present a clinical case of a pseudarthrosis of T12 vertebral body with severe posterior wall collapse, treated with removal of intravertebral pseudarthrosis focus by transpedicular access, T12 armed kyphoplasty with VBS® stents filled with cancellous bone autograft, laminectomy and stabilization with T10-T11-L1-L2 pedicle screws. We present clinical and imaging detailed results at 2-year follow-up and discuss our option for this biological minimally invasive treatment for vertebral pseudarthrosis that mimics the general principles of atrophic pseudarthrosis therapeutic and allows to perform an internal replacement of the necrotic vertebral body, avoiding the aggression of a total corpectomy.

Conclusions

This clinical case demonstrates a successful outcome of the surgical treatment of pseudarthrosis of vertebral body (mobile nonunion vertebral body) in which expandable intravertebral stents allow to perform an internal replacement of the necrotic vertebral body by creating intrasomatic cavities and filling them with bone graft, obtaining a totally bony vertebra with a metallic endoskeleton, which is biomechanically and physiologically more similar to the original one. This biological internal replacement of the necrotic vertebral body technique can be a safe and effective alternative over cementoplasty procedures or total vertebral body corpectomy and replacement for vertebral pseudarthrosis and may have several advantages over them, however long-term prospective studies are needed in order to prove the effectiveness and advantages of this surgical option in this rare and difficult pathological entity.

Percutaneous-Reinforced Osteoplasty: A Review of Emerging Treatment Strategies for Bone Interventions

Percutaneous-reinforced osteoplasty is currently being investigated as a possible therapeutic procedure for fracture stabilization in high-risk patients, primarily in patients with bone metastases or osteoporosis. For these patients, a percutaneous approach, if structurally sound, can provide a viable method for treating bone fractures without the physiologic stress of anesthesia and open surgery. However, the low strength of fixation is a common limitation that requires further refinement in scaffold design and selection of materials, and may potentially benefit from tissue-engineering-based regenerative approaches. Scaffolds that have tissue regenerative properties and low inflammatory response promote rapid healing at the fracture site and are ideal for percutaneous applications. On the other hand, preclinical mechanical tests of fracture-repaired specimens provide key information on restoration strength and long-term stability and enable further design optimization. This review presents an overview of percutaneous-reinforced osteoplasty, emerging treatment strategies for bone repair, and basic concepts of in vitro mechanical characterization.

INTRAVERTEBRAL EXPANDABLE IMPLANTS IN THORACOLUMBAR VERTEBRAL COMPRESSION FRACTURES

Current scientific evidence enhances the importance of the anatomic restauration of vertebral bodies with compression fractures aiming, as with other human body joints, to obtain a biomechanic and functional spine as close as the one prior to the fracture as possible. We consider that anatomic reduction of these fractures is only completely possible using intravertebral expandable implants, restoring vertebral endplate morphology, and enabling a more adequate intervertebral disc healing. This enables avoiding disc and osteodegenerative changes to that vertebral segment and its adjacent levels, as well as the anterior overload of adjacent vertebral bodies in older adults - a consequence of post-traumatic vertebral flattening - thus minimizing the risk of adjacent vertebral fractures. The ability of vertebral body fracture reduction and height maintenance over time and its percutaneous transpedicular application make the intra-vertebral expandable implants a very attractive option for treating these fractures. The authors show the direct and indirect reduction concepts of vertebral fractures, review the biomechanics, characteristics and indications of intravertebral expandable implants and present a suggestion for updating the algorithm for the surgical treatment of vertebral compression fractures which includes the use of intravertebral expandable implants. Level of Evidence V, Expert Opinion.

Tough and injectable fiber reinforced calcium phosphate cement as an alternative to polymethylmethacrylate cement for vertebral augmentation: a biomechanical study

Vertebral compression fractures (VCFs) are a very common problem among the elderly, which ultimately result in severe pain and a drastically reduced quality of life. An effective treatment for VCFs is the minimally invasive augmentation of the damaged vertebrae through vertebroplasty and/or kyphoplasty. These surgical procedures treat the affected vertebrae by injection of poly(methyl methacrylate) cement (PMMA) into the vertebral body. However, clinical use of PMMA cement is associated with major drawbacks. Bioceramic cements such as injectable calcium phosphate cements (CPC) exhibit a superior osteocompatibility over PMMA cements, but are too brittle for load-bearing applications. Here, we evaluated the handling and mechanical properties of a recently developed CPC formulation containing both poly(vinyl alcohol) (PVA) fibers and carboxymethyl cellulose (CMC) as an alternative to PMMA cement for vertebro- and kyphoplasty. Our results demonstrate that the addition of CMC rendered fiber-reinforced CPC injectable without negatively affecting its mechanical properties. Further, an ex vivo mechanical analysis clearly showed that extravasation of PVA fiber-reinforced CPC with CMC into trabecular bone was limited as compared to PMMA. Finally, we observed that the ex vivo biomechanical performance of vertebrae treated with CMC and PVA fibers was similar to PMMA-treated vertebrae. The obtained data suggests that PVA fiber-reinforced CPCs with CMC possesses adequate handling, mechanical and structural characteristics for vertebro- and kyphoplasty procedures. These data pave the way for future preclinical studies on the feasibility of treating vertebral compression fractures using PVA fiber-reinforced CPC with CMC.

Functionalization of Ceramic Coatings for Enhancing Integration in Osteoporotic Bone: A Systematic Review

Background: The success of reconstructive orthopaedic surgery strongly depends on the mechanical and biological integration between the prosthesis and the host bone tissue. Progressive population ageing with increased frequency of altered bone metabolism conditions requires new strategies for ensuring an early implant fixation and long-term stability. Ceramic materials and ceramic-based coatings, owing to the release of calcium phosphate and to the precipitation of a biological apatite at the bone-implant interface, are able to promote a strong bonding between the host bone and the implant. Methods: The aim of the present systematic review is the analysis of the existing literature on the functionalization strategies for improving the implant osteointegration in osteoporotic bone and their relative translation into the clinical practice. The review process, conducted on two electronic databases, identified 47 eligible preclinical studies and 5 clinical trials. Results: Preclinical data analysis showed that functionalization with both organic and inorganic molecules usually improves osseointegration in the osteoporotic condition, assessed mainly in rodent models. Clinical studies, mainly retrospective, have tested no functionalization strategies. Registered trademarks materials have been investigated and there is lack of information about the micro- or nano- topography of ceramics. Conclusions: Ceramic materials/coatings functionalization obtained promising results in improving implant osseointegration even in osteoporotic conditions but preclinical evidence has not been fully translated to clinical applications.

Characterization of doxycycline-loaded calcium phosphate cement: implications for treatment of aneurysmal bone cysts

Percutaneous doxycycline for treatment for aneurysmal bone cysts (ABCs) has been shown to decrease recurrence rates, however, this requires multiple procedures, includes the risks soft tissue necrosis, and does not provide structural support. We propose utilizing curettage with doxycycline-loaded calcium phosphate cement. This study aimed to evaluate the elution profile of doxycycline from calcium phosphate cement. Calcium phosphate cement underwent an in vitro elution protocol evaluating doxycycline concentrations of 0, 5, 10, and 15 mg/mL. Eluted concentrations were quantified utilizing high performance liquid chromatography at predetermined time points over 96 h. Compressive strength was evaluated both pre- and post-elution and micro-computed tomography was utilized to assess changes in cement porosity. Cement with 15 mg/mL of doxycycline maintained a higher average concentration (mean, 95% confidence intervals) (14.5 µg/mL [9.2-19.9 µg/mL]) compared to both 5 mg/mL (5.8 µg/mL [3.1-8.6 µg/mL]; P < 0.001) and 10 mg/mL (8.4 ± µg/mL [6.0-10.9 µg/mL]; P < 0.001). Ultimate stress significantly decreased between pre- and post-elution samples for 10 mg/mL (P= 0.001) and 15 mg/mL (P = 0.004) groups. This study demonstrated a dose-dependent response in ultimate strength and compressive modulus with addition of doxycycline to calcium phosphate cement.

Strontium-modified premixed calcium phosphate cements for the therapy of osteoporotic bone defects

In this study a premixed strontium-containing calcium phosphate bone cement for the application in osteoporotic bone defects has been developed and characterised regarding its material and in vitro properties as well as minimally invasive applicability in balloon kyphoplasty. Strontium was introduced into the cement by substitution of one precursor component, CaCO₃, with its strontium analogue, SrCO₃. Using a biocompatible oil phase as carrier liquid, a cement paste that only set upon contact with aqueous environment was obtained. Strontium modification resulted in an increased strength of set cements and radiographic contrast; and the cements released biologically relevant doses of Sr²⁺-ions that were shown to enhance osteoprogenitor cell proliferation and osteogenic differentiation. Finally, applicability of strontium-containing cement pastes in balloon kyphoplasty was demonstrated in a human cadaver spine procedure. The cement developed in this study may therefore be well suited for minimally invasive, osteoporosis-related bone defect treatment.

STATEMENT OF SIGNIFICANCE

Strontium-releasing calcium phosphate bone cements are promising materials for the clinical regeneration of osteoporosis-related bone defects since they have been shown to stimulate bone formation and at the same time limit osteoclastic bone resorption. Today clinical practice favours minimally invasive surgical techniques, e.g. for vertebral fracture treatment, posing special demands on such cements. We have therefore developed a premixed, strontium-releasing bone cement with enhanced mechanical properties and high radiographic visibility that releases biologically relevant strontium concentrations and thus stimulates cells of the osteogenic lineage. In a pilot experiment we also exemplify its excellent suitability for minimally invasive balloon kyphoplasty procedures.

Osteointegration and Resorption of Intravertebral and Extravertebral Calcium Phosphate Cement

STUDY DESIGN

Eleven patients with painful osteoporotic vertebral fractures who underwent kyphoplasty using calcium phosphate (CaP) cement were followed up for 1 week, 1, 2, and 3 years in a monocentric, nonrandomized, noncontrolled retrospective trial.

OBJECTIVE

This study investigates long-term radiomorphologic features of intraosseous CaP cement implants and of extraosseous CaP cement leakages for up to 3 years after implantation by kyphoplasty.

SUMMARY OF BACKGROUND DATA

Kyphoplasty is frequently used for the treatment of painful osteoporotic fractures. Of the materials available, CaP is frequently used as a filling material. Resorption of this material is frequently observed, although clinical outcome is comparable with other cements.

METHODS

Kyphoplasty utilizing CaP cement was performed in 11 patients with painful osteoporotic vertebral fractures. All patients received a pharmacological antiosteoporosis treatment consisting of calcium, vitamin D, and a standard dose of oral bisphosphonates. Radiomorphologic measurements, pain, and mobility were assessed.

RESULTS

Intraosseous and extraosseous CaP cement volumes decreased significantly over 3 years. However, vertebral stability as determined by a constant vertebral body height and the sagittal index was not impaired. Pain improved significantly 2 years after implantation and the mobility scores 1 year after kyphoplasty at least until the third year.

CONCLUSIONS

Intravertebral CaP cement implants are resorbed slowly over time without jeopardizing stability and clinical outcomes most likely because of a slowly progressing osseous replacement. Extraosseous CaP cement material because of leakages during the kyphoplasty procedure is almost completely resorbed as early as 2 years after the leakage occurred. Therefore, CaP cement is an important alternative to PMMA-based cement materials utilized for kyphoplasty of osteoporotic vertebral fractures.

Review of Percutaneous Kyphoplasty in China

STUDY DESIGN

Review article.

OBJECTIVE

The article mainly reviewed the development and current situation of percutaneous kyphoplasty (PKP) in China, aiming to introduce native efforts and progress for PKP procedure on the exploring road.

SUMMARY OF BACKGROUND DATA

Since PKP was first reported in China in 2002, Chinese orthopedic researchers have performed lots of clinical applications and studies on the treatment of osteoporotic vertebral compression fracture, spinal metastatic tumor, hemangioma, myeloma, vertebral nonunion, and so on.

METHODS

We reviewed the papers on PKP published by native researchers in English and Chinese via Pubmed, EMBASE, the Scopus database, and a series of Chinese databases including Wanfang Data, China National Knowledge Infrastructure (CNKI), and the China Science and Technology Journal Database. The large sample capacity researches, convictive systematic analysis, and overviews were mainly elected as convictive evidence to describe the overall situation of clinical outcomes, complications, and the various technical aspects used to improve conventional surgical management and clinical applications of PKP in China.

RESULTS

Until October 2015, 211 articles in English and 2352 studies in Chinese about PKP were reported by 1443 Chinese institutions from 22 provinces around China. More than 50976 patients reported through published articles have received the treatment of PKP. With the technique gradually improved, including puncture, bone cement infusion, vertebral expander instruments, diagnosis, and treatment of special type of vertebral fractures, PKP is performed with the better efficacy and less complication.

CONCLUSION

With the progression of minimally invasive spinal surgery around the world, PKP in China has been performed with a trend towards a rapid, safe, and effective treatment. Digital, real-time and artificial intelligence are the directions of future development of PKP.

LEVEL OF EVIDENCE

4.

A single CT-guided percutaneous intraosseous injection of thermosensitive simvastatin/poloxamer 407 hydrogel enhances vertebral bone formation in ovariectomized minipigs

The ultimate goal of osteoporosis treatment is prevention of fragile fracture. Local treatment targeting specific bone may decrease the incidence of osteoporotic fractures. We developed an injectable, thermosensitive simvastatin/poloxamer 407 hydrogel; a single CT-guided percutaneous intraosseous injection augmented vertebrae in ovariectomized minipigs.

INTRODUCTION

The greatest hazard associated with osteoporosis is local fragility fractures. An adjunct, local treatment might be helpful to decrease the incidence of osteoporotic fracture. Studies have found that simvastatin stimulates bone formation, but the skeletal bioavailability of orally administered is low. Directly delivering simvastatin to the specific bone that is prone to fractures may reinforce the target bone and reduce the incidence of fragility fractures.

METHODS

We developed an injectable, thermosensitive simvastatin/poloxamer 407 hydrogel, conducted scanning electron microscopy, rheological, and drug release analyses to evaluate the delivery system; injected it into the lumbar vertebrae of ovariectomized minipigs via minimally invasive CT-guided percutaneous vertebral injection. Three months later, BMD, microstructures, mineral apposition rates, and strength were determined by DXA, micro-CT, histology, and biomechanical test; expression of VEGF, BMP2, and osteocalcin were analyzed by immunohistochemistry and Western blots.

RESULTS

Poloxamer 407 is an effective controlled delivery system for intraosseous-injected simvastatin. A single injection of the simvastatin/poloxamer 407 hydrogel significantly increased BMD, bone microstructure, and strength; the bone volume fraction and trabecular thickness increased nearly 150 %, bone strength almost doubled compared with controls (all P < 0.01); and induced higher expression of VEGF, BMP2, and osteocalcin.

CONCLUSIONS

CT-guided percutaneous vertebral injection of a single simvastatin/poloxamer 407 thermosensitive hydrogel promotes bone formation in ovariectomized minipigs. The underlying mechanism appears to involve the higher expression of VEGF and BMP-2.

Osseous vitality in single photon emission computed tomography/computed tomography (SPECT/CT) after balloon tibioplasty of the tibial plateau: a case series

Background

The minimally invasive, balloon-assisted reduction and cement-augmented internal fixation of the tibial plateau is an innovative surgical procedure for tibial plateau fractures. The close proximity of balloons and cement to the knee joint poses a potential risk for osteonecrosis; especially in the case of thin bone lamellae. However, there are no studies about the vitality of the cement-surrounding tissue after these tibioplasties. Therefore, our goal was to assess the osseous vitality after cement-augmented balloon tibioplasty using single photon emission computed tomography/computed tomography (SPECT/CT) in a series of patients.

Methods

This case series evaluated available consecutive patients, whose tibial plateau fractures were treated with balloon-assisted, cement-augmented tibioplasty and received a SPECT/CT. Primary outcome variables were osseous vitality on SPECT/CTs according to the semiquantitative tracer activity analysis. The mean uptake of eight tibial regions of interest was referenced to the mean uptake count on the same region of the contralateral leg to obtain a count ratio. Osteonecrosis was defined as a photopenic area or cold defect. Secondary variables included clinical and radiological follow-up data. Statistics were carried out in a descriptive pattern.

Results

Ten patients with a mean age of 59 years and a mean follow up of 18 months were included. Calcium phosphate (CaP) substitute bone cement was used in 60 % and polymethyl methacrylate mixed with hydroxyapatite (PMMA/HA) bone cement in 40 %. Normal to high SPECT/CT activity without photopenic areas were observed in all patients and the mean tracer activity ratio was four, indicating vital bone in all patients. There were no postoperative infections and only one 57 year old patient with hemineglect and CaP cement showed failed osseous consolidation. The mean Tegner and Lysholm as well as the Lysholm scores were three and 80, respectively.

Conclusions

This novel study about cement-augmented balloon tibioplasties showed that osseous vitality remains intact according to SPECT/CT analysis; irrespective of the type of cement and even in the presence of thin bone lamellae. This procedure was safe and well-suited for lateral tibial plateau fractures in particular. Surgeons may consider using PMMA/HA bone cement for void filling in elderly fracture patients without concern about bone viability.

Investigating the Effects of Surface-Initiated Polymerization of ε-Caprolactone to Bioactive Glass Particles on the Mechanical Properties of Settable Polymer/Ceramic Composites

Injectable bone grafts with strength exceeding that of trabecular bone could improve the management of a number of orthopaedic conditions. Ceramic/polymer composites have been investigated as weight-bearing bone grafts, but they are typically weaker than trabecular bone due to poor interfacial bonding. We hypothesized that entrapment of surface-initiated poly(ε-caprolactone) (PCL) chains on 45S5 bioactive glass (BG) particles within an in situ-formed polymer network would enhance the mechanical properties of reactive BG/polymer composites. When the surface-initiated PCL molecular weight exceeded the molecular weight between crosslinks of the network, the compressive strength of the composites increased 6- to 10-fold. The torsional strength of the composites exceeded that of human trabecular bone by a factor of two. When injected into femoral condyle defects in rats, the composites supported new bone formation at 8 weeks. The initial bone-like strength of BG/polymer composites and their ability to remodel in vivo highlight their potential for development as injectable grafts for repair of weight-bearing bone defects.

Self-setting calcium orthophosphate formulations

In early 1980s, researchers discovered self-setting calcium orthophosphate cements, which are bioactive and biodegradable grafting bioceramics in the form of a powder and a liquid. After mixing, both phases form pastes, which set and harden forming either a non-stoichiometric calcium deficient hydroxyapatite or brushite. Since both of them are remarkably biocompartible, bioresorbable and osteoconductive, self-setting calcium orthophosphate formulations appear to be promising bioceramics for bone grafting. Furthermore, such formulations possess excellent molding capabilities, easy manipulation and nearly perfect adaptation to the complex shapes of bone defects, followed by gradual bioresorption and new bone formation. In addition, reinforced formulations have been introduced, which might be described as calcium orthophosphate concretes. The discovery of self-setting properties opened up a new era in the medical application of calcium orthophosphates and many commercial trademarks have been introduced as a result. Currently such formulations are widely used as synthetic bone grafts, with several advantages, such as pourability and injectability. Moreover, their low-temperature setting reactions and intrinsic porosity allow loading by drugs, biomolecules and even cells for tissue engineering purposes. In this review, an insight into the self-setting calcium orthophosphate formulations, as excellent bioceramics suitable for both dental and bone grafting applications, has been provided.

Controlling the biological function of calcium phosphate bone substitutes with drugs

There is a growing interest in bone tissue engineering for bone repair after traumatic, surgical or pathological injury, such as osteolytic tumor or osteoporosis. In this regard, calcium phosphate (CaP) bone substitutes have been used extensively as bone-targeting drug-delivery systems. This localized approach improves the osteogenic potential of bone substitutes by delivering bone growth factors, thus extending their biofunctionality to any pathological context, including infection, irradiation, tumor and osteoporosis. This review briefly describes the physical and chemical processes implicated in the preparation of drug-delivering CaPs. It also describes the impact of these processes on the intrinsic properties of CaPs, especially in terms of the drug-release profile. In addition, this review focuses on the potential influence of drugs on the resorption rate of CaPs. Interestingly, by modulating the resorption parameters of CaP biomaterials, it should be possible to control the release of bone-stimulating ions, such as inorganic phosphate, in the vicinity of bone cells. Finally, recent in vitro and in vivo evaluations are extensively reported.

Calcium phosphate cements as drug delivery materials

Calcium phosphate cements are used as synthetic bone grafts, with several advantages, such as their osteoconductivity and injectability. Moreover, their low-temperature setting reaction and intrinsic porosity allow for the incorporation of drugs and active principles in the material. It is the aim of the present work to: a) provide an overview of the different approaches taken in the application of calcium phosphate cements for drug delivery in the skeletal system, and b) identify the most significant achievements. The drugs or active principles associated to calcium phosphate cements are classified in three groups, i) low molecular weight drugs; ii) high molecular weight biomolecules; and iii) ions.

Evaluation of the in vitro cell-material interactions and in vivo osteo-integration of a spinal acrylic bone cement

INTRODUCTION

Polymethylmethacrylate bone cements have proven performance in arthroplasty and represent a common bone filler, e.g. in vertebroplasty. However, acrylic cements are still subject to controversy concerning their exothermic reaction and osteo-integration potential. Therefore, we submitted a highly filled acrylic cement to a systematic investigation on the cell-material and tissue-implant response in vitro and in vivo.

MATERIALS AND METHODS

Cured Vertecem V+ Cements were characterized by electron microscopy. Human bone marrow-derived mesenchymal stem cell morphology, growth and differentiation on the cured cement were followed for 28 days in vitro. The uncured cement was injected in an ovine cancellous bone defect and analysed 4 and 26 weeks post-implantation.

RESULTS

The rough surface of the cement allowed for good stem cells adhesion in vitro. Up-regulation of alkaline phosphatase was detected after 8 days of incubation. No adverse local effects were observed macroscopically and microscopically following 4 and 26 weeks of implantation of the cement into drill-hole defects in ovine distal femoral epiphysis. Direct bone apposition onto the implant surface was observed resulting in extended signs of osteo-integration over time (35.2 ± 24.2% and 88.8 ± 8.8% at week 4 and 26, respectively).

CONCLUSION

Contrary to the established opinion concerning bony tissue response to implanted acrylic bone cements, we observed an early cell-implant in vitro interaction leading to cell growth and differentiation and significant signs of osteo-integration for this acrylic cement using standardized methods. Few outlined limitations, such as the use of low cement volumes, have to be considered in the interpretation of the study results.

Biomechanical, histological and histomorphometric analyses of calcium phosphate cement compared to PMMA for vertebral augmentation in a validated animal model

INTRODUCTION

Calcium phosphate cements (biocements) are alternative materials for use in vertebral augmentation procedures, and are a potential solution to problems associated with polymethylmethacrylate (PMMA) cements. The aim of this study is to demonstrate the utility of percutaneously injected biocements compared with PMMA in a validated animal model of osteoporosis.

MATERIALS AND METHODS

Fortyseven augmentation procedures were performed on 11 osteoporotic sheep. 9 vertebrae were augmented with PMMA and 38 with a biocement. The animals were killed in four groups: at 7 days, 3 months, 6 months, and 1 year after intervention. Radiological study and TC of the pieces were obtained to evaluate for leakage, cement diffusion, and integration. In total, 26 biomechanic studies and 27 histomorphometry analyses were performed, included control vertebrae.

RESULTS

In 20.9% of the vertebrae, the hole was empty at sacrifice. The pattern of fracture was heterogeneous, and cement augmentation did not increase vertebral strength or decrease vertebral stiffness compared to control vertebrae, with neither PMMA or biocement. The rate of remodeling of the biocement was not predictable. In the single majority, there is peripheral remodeling, staying the volume of injected biocement stable.

CONCLUSIONS

Even though this animal model may not be useful to analyze the biomechanical pattern of treated vertebrae, it demonstrates that the percutaneous use of biocements in vertebral augmentation techniques is not predictable. This is one reason not to recommend its use presently as a substitute for PMMA in vertebral reinforcement procedures.

Microstructure and biomechanical characteristics of bone substitutes for trauma and orthopaedic surgery

BACKGROUND

Many (artificial) bone substitute materials are currently available for use in orthopaedic trauma surgery. Objective data on their biological and biomechanical characteristics, which determine their clinical application, is mostly lacking. The aim of this study was to investigate structural and in vitro mechanical properties of nine bone substitute cements registered for use in orthopaedic trauma surgery in the Netherlands.

METHODS

Seven calcium phosphate cements (BoneSource®, Calcibon®, ChronOS®, Eurobone®, HydroSet™, Norian SRS®, and Ostim®), one calcium sulphate cement (MIIG® X3), and one bioactive glass cement (Cortoss®) were tested. Structural characteristics were measured by micro-CT scanning. Compression strength and stiffness were determined following unconfined compression tests.

RESULTS

Each bone substitute had unique characteristics. Mean total porosity ranged from 53% (Ostim®) to 0.5% (Norian SRS®). Mean pore size exceeded 100 μm only in Eurobone® and Cortoss® (162.2 ± 107.1 μm and 148.4 ± 70.6 μm, respectively). However, 230 μm pores were found in Calcibon®, Norian SRS®, HydroSet™, and MIIG® X3. Connectivity density ranged from 27/cm3 for HydroSet™ to 0.03/cm3 for Calcibon®. The ultimate compression strength was highest in Cortoss® (47.32 MPa) and lowest in Ostim® (0.24 MPa). Young's Modulus was highest in Calcibon® (790 MPa) and lowest in Ostim® (6 MPa).

CONCLUSIONS

The bone substitutes tested display a wide range in structural properties and compression strength, indicating that they will be suitable for different clinical indications. The data outlined here will help surgeons to select the most suitable products currently available for specific clinical indications.

Bone substitutes in the Netherlands - a systematic literature review

Autologous bone grafting is currently considered as the gold standard to restore bone defects. However, clinical benefit is not guaranteed and there is an associated 8-39% complication rate. This has resulted in the development of alternative (synthetic) bone substitutes. The aim of this systematic literature review was to provide a comprehensive overview of literature data of bone substitutes registered in the Netherlands for use in trauma and orthopedic surgery. Brand names of selected products were used as search terms in three available databases: Embase, PubMed and Cochrane. Manuscripts written in English, German or Dutch that reported on structural, biological or biomechanical properties of the pure product or on its use in trauma and orthopedic surgery were included. The primary search resulted in 475 manuscripts from PubMed, 653 from Embase and 10 from Cochrane. Of these, 218 met the final inclusion criteria. Of each product, structural, biological and biomechanical characteristics as well as their clinical indications in trauma and orthopedic surgery are provided. All included products possess osteoconductive properties but differ in resorption time and biomechanical properties. They have been used for a wide range of clinical applications; however, the overall level of clinical evidence is low. The requirements of an optimal bone substitute are related to the size and location of the defect. Calcium phosphate grafts have been used for most trauma and orthopedic surgery procedures. Calcium sulphates were mainly used to restore bone defects after tumour resection surgery but offer minimal structural support. Bioactive glass remains a potential alternative; however, its use has only been studied to a limited extent.

Biomechanical comparison of kyphoplasty versus a titanium mesh implant with cement for stabilization of vertebral compression fractures

STUDY DESIGN

In vitro biomechanical investigation.

OBJECTIVE

To evaluate differences in biomechanical stability of vertebral compression fractures repaired using balloon kyphoplasty versus a titanium mesh implant.

SUMMARY OF BACKGROUND DATA

Vertebral compression fractures may be stabilized using an expandable balloon followed by cement injection. There are small but finite risks of endplate fracture and cement extravasation with this procedure. Alternative techniques may affect cement injection volumes, height maintenance, and biomechanical stability but require investigation.

METHODS

Four male human cadaveric spines from T2 to L5 were used in this study. After determining bone mineral density, individual vertebral bodies were dissected and inspected for previous fractures or additional exclusion criteria. In the remaining vertebral bodies (n=48) anterior wedge fractures were created using a materials testing machine. Fractured vertebral bodies were systematically randomized to be repaired either with balloon kyphoplasty or with titanium mesh implant and polymethylmethacrylate bone cement, using image intensified fluoroscopy. Anterior vertebral body height (cm) was measured initially, after mechanically creating an anterior wedge fracture, after repairing the compression fracture with either technique, and after recompressing the vertebral body following a 24-hour cement polymerization period. Data for cement injection volume (mL) and height maintained following testing (cm) were compared between repair groups using a 1-way analysis of variance (P<0.05). Data for stiffness (N/mm), yield load (N), and ultimate load (N) were compared between intact bodies and repaired bodies using a 2-way analysis of variance (P<0.05).

RESULTS

There was significantly less cement injected (P<0.001) and significantly greater height maintained (P<0.025) with the titanium implant group compared to the kyphoplasty group. There were no significant differences in biomechanical stability between the 2 groups (P>0.05).

CONCLUSION

The titanium implant was biomechanically equivalent to the kyphoplasty repair while necessitating less cement and providing greater height maintenance in vitro. Improvements in pain and function could not be specifically addressed in this in vitro study and should be evaluated in a clinical case series.

Evaluation of a novel osteoporotic drug delivery system in vitro: alendronate-loaded calcium phosphate cement

As a new drug delivery system, calcium phosphate cement was fabricated with different concentrations of alendronate (2, 5, 10 wt%), which is widely used to treat diseases related to bone loss. This study investigated the properties of the novel composite alendronate-loaded calcium phosphate cement in vitro, and found that the structure and chemical properties of the composites were not different from the calcium phosphate cement. However, the calcium phosphate cement set time was significantly faster compared with other groups (P<.01), and the strength of the calcium phosphate cement was significantly greater than the other groups (P<.01). The alendronate release rate from the composite increased with increase in drug concentration in the cement, and release was sustained over 21 days. The composite showed good biocompatibility in terms of the proliferation of rat mesenchymal stem cells. The alendronate-loaded calcium phosphate cement displayed satisfactory properties in vitro, which may be of benefit locally for osteoporotic bone in vivo.

Mechanical properties of blood-mixed polymethylmetacrylate in percutaneous vertebroplasty

Study Design

Mechanical study of polymethylmetacrylate (PMMA) mixed with blood as a filler.

Purpose

An attempt was made to modify the properties of PMMA to make it more suitable for percutaneous vertebroplasty (PVP).

Overview of Literature

The expected mechanical changes by adding a filler into PMMA included decreasing the Young's modulus, polymerization temperature and setting time. These changes in PMMA were considered to be more suitable and adaptable conditions in PVP for an osteoporotic vertebral compression fracture.

Methods

Porous PMMA were produced by mixing 2 ml (B2), 4 ml (B4) and 6 ml (B6) of blood as a filler with 20 g of regular PMMA. The mechanical properties were examined and compared with regular PMMA(R) in view of the Young's modulus, polymerization temperature, setting time and optimal passing-time within an injectable viscosity (20-50 N-needed) through a 2.8 mm-diameter cement-filler tube. The porosity was examined using microcomputed tomography.

Results

The Young's modulus decreased from 919.5 MPa (R) to 701.0 MPa (B2), 693.5 Mpa (B4), and 545.6 MPa (B6). The polymerization temperature decreased from 74.2℃ (R) to 59.8℃ (B2), 54.2℃ (B4) and 47.5℃ (B6). The setting time decreased from 1,065 seconds (R) to 624 seconds (B2), 678 seconds (B4), and 606 seconds (B6), and the optimal passing-time decreased from 75.6 seconds (R) to 46.6 seconds (B2), 65.0 seconds (B4), and 79.0 seconds (B6). The porosity increased from 4.2% (R) to 27.6% (B2), 27.5% (B4) and 29.5% (B6). A homogenous microstructure with very fine pores was observed in all blood-mixed PMMAs.

Conclusions

Blood is an excellent filler for PMMA. Group B6 showed more suitable mechanical properties, including a lower elastic modulus due to the higher porosity, less heating and retarded optimal passing-time by the serum barrier, which reduced the level of friction between PMMA and a cement-filler tube.

Morphological changes of injected calcium phosphate cement in osteoporotic compressed vertebral bodies

SUMMARY

This study was undertaken to investigate the radiologic and clinical outcomes of vertebroplasty with calcium phosphate (CaP) cement in patients with osteoporotic vertebral compression fractures. The morphological changes of injected CaP cement in osteoporotic compressed vertebral bodies were variable and unpredictable. We suggest that the practice of vertebroplasty using CaP should be reconsidered.

INTRODUCTION

Recently, CaP, an osteoconductive filler material, has been used in the treatment of osteoporotic compression fractures. However, the clinical results of CaP-cement-augmented vertebrae are still not well established. The purpose of this study is to assess the clinical results of vertebroplasty with CaP by evaluating the morphological changes of CaP cement in compressed vertebral bodies.

METHODS

Fourteen patients have been followed for more than 2 years after vertebroplasty. The following parameters were reviewed: age, sex, T score, compliance with osteoporosis medications, visual analog scale score, compression ratio, subsequent compression fractures, and any morphological changes in the filler material.

RESULTS

The morphological changes of injected CaP included reabsorption, condensation, bone formation (osteogenesis), fracture of the CaP solid hump, and heterotopic ossification. Out of 14 patients, 11 (78.6%) developed progression of the compression of the CaP-augmented vertebral bodies after vertebroplasty.

CONCLUSIONS

The morphological changes of the injected CaP cement in the vertebral bodies were variable and unpredictable. The compression of the CaP-augmented vertebrae progressed continuously for 2 years or more. The findings of this study suggest that vertebroplasty using CaP cement should be reconsidered.

Long-term evaluation of a calcium phosphate bone cement with carboxymethyl cellulose in a vertebral defect model

We investigated histological and compressive properties of a calcium phosphate bone cement (BoneSource (CPC); Stryker Orthopaedics, Mahwah, New Jersey) plus carboxymethyl cellulose (CMC) using a sheep vertebral bone void model. Bone voids were surgically created in L3 and L5 in each of 40 sheep, and the voids were filled with the cement. Histological and radiographic evaluations were performed on one vertebral body from each animal at either: 0, 3, 6, 12, 24, or 36 months after surgery; mechanical testing was performed on operated and non-operated vertebral bodies from 35 sheep. Undecalcified sections were digitized, and the area of the original defect, new bone formation, empty space, fibrous tissue, and residual cement were quantified with histomorphometry. Decalcified sections were evaluated qualitatively. The cement was biocompatible, extremely osteoconductive and underwent steady resorption and replacement by bone and bone marrow. Histomorphometry showed variations in the rate of cement remodeling among animals in each time group, but on average, at 36 months the original defect area was occupied by approximately 14% bone, 82% cement, and 4% bone marrow. Even in animals that had greater resorption of cement, there was good bone ingrowth with no fibrous tissue. Compressive testing did not reveal a significant difference in the mechanical properties between vertebral bodies augmented with cement and non-augmented controls, irrespective of the postoperative time. BoneSource mixed with CMC had adequate osteoconductivity, biocompatibility, and adequate compressive strength. There was variability among animals, but histology suggests that considerable cement was still present in most samples after 36 months.

Calcium Orthophosphate Cements and Concretes

In early 1980s, researchers discovered self-setting calcium orthophosphate cements, which are a bioactive and biodegradable grafting material in the form of a powder and a liquid. Both phases form after mixing a viscous paste that after being implanted, sets and hardens within the body as either a non-stoichiometric calcium deficient hydroxyapatite (CDHA) or brushite, sometimes blended with unreacted particles and other phases. As both CDHA and brushite are remarkably biocompartible and bioresorbable (therefore, in vivo they can be replaced with newly forming bone), calcium orthophosphate cements represent a good correction technique for non-weight-bearing bone fractures or defects and appear to be very promising materials for bone grafting applications. Besides, these cements possess an excellent osteoconductivity, molding capabilities and easy manipulation. Furthermore, reinforced cement formulations are available, which in a certain sense might be described as calcium orthophosphate concretes. The concepts established by calcium orthophosphate cement pioneers in the early 1980s were used as a platform to initiate a new generation of bone substitute materials for commercialization. Since then, advances have been made in the composition, performance and manufacturing; several beneficial formulations have already been introduced as a result. Many other compositions are in experimental stages. In this review, an insight into calcium orthophosphate cements and concretes, as excellent biomaterials suitable for both dental and bone grafting application, has been provided.

Comparison of kyphoplasty with use of a calcium phosphate cement and non-operative therapy in patients with traumatic non-osteoporotic vertebral fractures

One of the current standard treatment options for younger patients with stable traumatic vertebral fractures is conservative treatment using braces. Kyphoplasty as a minimally invasive procedure has been shown to be effective in stabilizing vertebral body fractures, resulting in immediate pain relief and improved physical function. The purpose of this prospective study was to clarify whether patients with acute traumatic vertebral fractures benefit more from kyphoplasty or from conservative treatment with a brace. A prospective study was undertaken in two centers. Forty patients with acute painful traumatic vertebral body fractures type A1-A3 (AO-classification) after adequate trauma, without osteoporosis, suitable for kyphoplasty or therapy by brace were included into the study. Follow-up was 12 months. Patients of the kyphoplasty group showed an immediate beneficial and significant effect postoperatively, and better outcomes 1 and 3 months after operation compared to the conservatively treated group in pain feeling, mobility and vertebral body height. After 12 months the difference between both groups was not significant excepting the vertebral body height. Kyphoplasty provides early and lasting reduction of pain and improvement of daily activity. However, there are clinically asymptomatic cement leakages in up to 45% of which we do not know the consequences in long term. Every patient with traumatic vertebral body fracture treated by kyphoplasty has to be informed about that. Long-time results are outstanding and our findings require confirmation by randomized controlled trials.

Calcium-phosphate and polymethylmethacrylate cement in long-term outcome after kyphoplasty of painful osteoporotic vertebral fractures

STUDY DESIGN

A comparative prospective trial evaluating 3-year outcome.

OBJECTIVE

To compare clinical and morphologic outcomes as well as follow-up fractures after kyphoplasty of painful osteoporotic vertebral fractures with calcium-phosphate (CaP) cement (group 1) and with polymethylmethacrylate (PMMA)-cement (group 2).

SUMMARY OF BACKGROUND DATA

CaP cements seem to be an alternative material for usage in kyphoplasty of vertebral fractures. CaP cements are biodegradable and replaceable by newly formed bone after implantation. Concerns have been raised with regard to the stability of resorbable CaP-cements after implantation into vertebrae post kyphoplasty. Calcibon is a possible CaP cement, which exhibited adequate stability in short-term observations.

MATERIALS AND METHODS

Kyphoplasty was performed in 40 consecutive patients with primary osteoporosis and painful vertebral fractures, 20 received CaP-cement, 20 were treated with PMMA-cement. All patients received a pharmacological antiosteoporosis treatment (1000 mg calcium, 1000 IU vitamin D3, and oral aminobisphosphonate), pain medication, and physiotherapy. Pain (visual analog scale [VAS]; range, 0-100), mobility (EVOS-score; range, 0-100) and radiomorphologic measurements were assessed at baseline and after 6, 12, and 36 months.

RESULTS

There were no statistically significant differences between the CaP and PMMA-cement group regarding VAS-scores, EVOS-scores, or height-restoration at any time point. Furthermore, there was no significant difference in the occurrence of vertebral follow-up fractures between both groups during the 3-year follow-up period.

CONCLUSION

CaP cement, e.g., Calcibon, is as effective and safe as conventional PMMA-cement with regard to immediate and sustained pain reduction and improvement of mobility after kyphoplasty of patients with painful osteoporotic vertebral fractures. CaP cement has the potential of being resorbed and replaced by newly formed bone tissue; thus, it seems to be a promising alternative for PMMA also in younger patients with painful vertebral fractures.

Progressive, repeated lumbar compression fracture at the same level after vertebral kyphoplasty with calcium phosphate cement. Case report

The authors report a case of vertebral body collapse after kyphoplasty in which calcium phosphate cement (CPC) was used. The patient, a 69-year-old woman in whom an L-1 compression fracture had been revealed on magnetic resonance imaging, had been treated at another regional hospital for the compressed vertebra. Kyphoplasty in which CPC was used had been performed at that time. Two months later, she suffered from severe upper back pain, which was the same as the previously existing pain, and she experienced progressive weakness of both lower extremities (motor strength Grade 4/5). A more severe compression of the L-1 vertebra was revealed, and thecal sac compression caused by retrobulging of the CPC on the collapsed L-1 vertebra was present 5 months posttreatment. The authors performed decompression and fusion surgery to treat the repeatedly collapsed L-1 vertebra. They suggest that the use of CPC in vertebrae with compression fractures should be reconsidered.

The intravertebral vacuum phenomen as specific sign of osteonecrosis in vertebral compression fractures: results from a radiological and histological study

This study investigated the prevalence of the intravertebral vacuum phenomenon (IVP) and osteonecroses in vertebral compression fractures (VCFs). We therefore performed an histological analysis of biopsies obtained from VCFs prior to balloon kyphoplasty. Computed tomography (CT) scans were reviewed regarding the presence of an IVP (i.e. cleft sign, Kümmell disease). We reviewed the data of 266 consecutive patients treated by balloon kyphoplasty in 501 procedures from 2002 to 2004. From 180 patients (68%) we obtained adequate bone tissue for histological evaluation. Biopsy specimens were analysed regarding the presence of osteoporosis, infection, malignancy and osteonecrosis. CT scans of all 180 patients were reviewed for presence of an IVP. Histological examination revealed 135 (75%) osteoporoses, 20 (11%) neoplasms, 12 (7%) trauma cases and 13 (7%) osteonecroses. An IVP was present in 12 (7%) patients. There was a significant association of osteonecrosis and IVP (P < 0.0001). Eleven of 12 patients with a vacuum phenomenon showed an osteonecrosis on histology, whereas 11 of 13 patients with osteonecrosis showed an IVP on CT. The IVP is a specific sign of osteonecrosis in vertebral compression fractures (sensitivity 85%, specificity 99%, positive predictive value 91%). Our findings strongly support the thesis that an IVP indicates local bone ischemia associated with a non-healing vertebral collapse and pseudarthrosis.