Order and disorder in alkyl stationary phases

Preparation and evaluation of versatile zwitterionic mixed-mode chromatographic stationary phases

The limitations of traditional single-mode stationary phases in complex chromatographic separations underscore the critical need for versatile mixed-mode stationary phases. Zwitterions, characterized by tunable ionic structures, have attracted considerable attention in the development of stationary phases. This study presents the innovative design of a bidentate phenyl-embedded zwitterionic stationary phase (SIL-BA-BMPPA), synthesized through the strategic integration of tertiary amine groups and carboxyl groups onto silica spheres. The retention mechanism of SIL-BA-BMPPA was comprehensively evaluated with analytes of diverse structures under various separation conditions. Its chromatographic performance was then compared with that of an alkyl-embedded counterpart (SIL-BA-BDA), as well as traditional C18 and bare silica stationary phases. As expected, SIL-BA-BMPPA exhibited satisfactory separation performance in both reversed-phase and hydrophilic interaction modes. Moreover, amphipathic analytes, including acidic, basic, and zwitterionic compounds, were efficiently separated on SIL-BA-BMPPA through the selective synergistic effects of multiple interactions. SIL-BA-BMPPA demonstrates versatile mixed-mode separation capabilities, endowing it with substantial potential for complex chromatographic separations.

Immobilization of two dendritic organic phases onto silica and their molecular shape recognition for polycyclic aromatic hydrocarbons, tocopherols and carotenoid isomers

BACKGROUND

Molecular shape selectivity, based on the size and shape parameters of the molecule, such as length and planarity, is a separation process that can be used for compounds with restricted shapes, such as isomers. The separation of geometric isomers is challenging because these compounds have similar physicochemical properties but differ slightly in molecular shape. The ability to separate and quantify these isomers is important in high performance liquid chromatography (HPLC), which is one of the most widely used techniques in separation science today, because the shape of the molecule has a strong influence on biological processes.

RESULTS

We prepared symmetrical discoidal dendrimeric organomolecule gelators (GSDM) and o-phenylenediamine-derived low-molecular-weight dendrimeric organomolecule gelators (G1) and bonded them to silica surfaces. The dendritic organic compound-grafted silica (SiO2@GSDM and SiO2@G1) was used as HPLC stationary phases for the separation of shape-restricted isomers of polycyclic aromatic hydrocarbons (PAHs), carotenoids and tocopherols. The two phases exhibit a very high molecular shape selectivity compared to the commercially available alkyl phases. There are differences in molecular shape selectivity between the two stationary phases. Changes in the chemical structure of dendritic organic compounds can alter the orientation of the molecules, as well as changes in the molecular recognition ability. It was found that SiO2@GSDM has high molecular linear selectivity for PAHs at different temperatures, even at 50 °C. The planar selectivity of SiO2@GSDM was better for triphenylene and o-terphenyl benzenes compared to SiO2@G1.

SIGNIFICANCE

This separation behavior may be attributed to the combined effect of weak interaction centers, which allowed the effective separation of bioactive and shape-restricted isomers through multiple interactions. Furthermore, SiO2@GSDM showed better separation of tocopherols and carotenoids, suggesting that the backbone and ordered structure of organic molecular gelators is an effective way to improve the shape selectivity of the molecules, whereas the molecular orientation of the functional groups influences the separation mechanism of the shape-restricted isomers.

A Sensitive Ultrahigh-Performance Liquid Chromatography/Tandem Mass Spectrometry Method for the Simultaneous Analysis of Phytocannabinoids and Endocannabinoids in Plasma and Brain

Introduction: Δ9-tetrahydrocannabinol (THC) and cannabidiol (CBD) are major chemical constituents of cannabis, which may interact either directly or indirectly with the endocannabinoid and endocannabinoid-like ("paracannabinoid") systems, two lipid-based signaling complexes that play important roles in physiology. Legislative changes emphasize the need to understand how THC and CBD might impact endocannabinoid and paracannabinoid signaling, and to develop analytical approaches to study such impact. In this study, we describe a sensitive and accurate method for the simultaneous quantification of THC, its main oxidative metabolites [11-hydroxy-Δ9-THC (11-OH-THC) and 11-nor-9-carboxy-Δ9-THC (11-COOH-THC)], CBD, and a representative set of endocannabinoid [anandamide and 2-arachidonoyl-sn-glycerol (2-AG)] and paracannabinoid [palmitoylethanolamide (PEA) and oleoylethanolamide (OEA)] compounds. Analyte separation relies on the temperature-dependent shape selectivity properties of polymerically bonded C18 stationary phases. Materials and Methods: Analytes are extracted from tissues using acetonitrile precipitation followed by phospholipid removal. The ultrahigh-performance liquid chromatography/tandem mass spectrometry protocol utilizes a commercially available C18 polymeric-bonded phase column and a simple gradient elution system. Results: Ten-point calibration curves show excellent linearity (R2>0.99) over a wide range of analyte concentrations (0.02-500 ng/mL). Lowest limits of quantification are 0.05 ng/mL for anandamide, 0.1 ng/mL for 11-OH-THC and OEA, 0.2 ng/mL for THC and CBD, 0.5 ng/mL for 11-COOH-THC, 1.0 ng/mL for 2-AG, and 2.0 ng/mL for PEA. The lowest limits of detection are 0.02 ng/mL for anandamide, 0.05 ng/mL for 11-OH-THC and OEA, 0.1 ng/mL for THC and CBD, 0.2 ng/mL for 11-COOH-THC, 0.5 ng/mL for 2-AG, and 1.0 ng/mL for PEA. Conclusions: An application of the method is presented, which showed that phytocannabinoid administration elevates endocannabinoid levels in plasma and brain of adolescent male and female mice.

Surface Modification of Silica with β-Alanine Derivatives for Unique Applications in Liquid Chromatography

Column purchasing cost is an important issue for an analyst to analyze complex sample matrices. Here, we report the development of an amino acid (β-alanine)-derived stationary phase (Sil-Ala-C12) with strategic and effective interaction sites (amide and urea as embedded polar groups with C12 alkyl chain) able to separate various kinds of analytes. Owing to the balanced hydrophobicity and hydrophilicity of the phase, it showed exceptional separation abilities in both reversed-phase high-performance liquid chromatography (RP-HPLC) as a hydrophobic phase and hydrophilic interaction chromatography (HILIC) as a hydrophilic phase. Remarkably, the baseline separation was achieved for the challenging β- and γ-isomers of tocopherol. Usually, three columns such as pentafluorophenyl or C30, C18, and sulfobetaine HILIC are required for the analysis of vitamin E, capsaicinoids, and vitamin C in chili peppers (Capsicum spp.), respectively. However, only Sil-Ala-C12 was able to separate these analytes. A single column can serve 3-4 purposes, which suggests that Sil-Ala-C12 had the potential to reduce column purchasing costs.

Separations by Shape: Molecular Shape Recognition in Liquid Chromatography

Molecular shape can provide a basis for chromatographic separations that is distinct from other interaction mechanisms often considered in liquid chromatography. Molecular shape recognition, or shape selectivity, is most evident for the separation of isomeric compounds that have constrained molecular structures, such as polycyclic aromatic hydrocarbons. A central feature of shape-selective columns is conformational order within the stationary phase; this aspect of stationary phase morphology is revealed through spectroscopic studies and molecular dynamics simulations, and is correlated with chromatographic performance.

A carbonylative coupling approach to alkyl stationary phases with variable embedded carbamate groups for high-performance liquid chromatography

A highly efficient carbonylative coupling method for the preparation of alkyl stationary phases with variable numbers of carbamate groups was established. The effectiveness of such method was verified through elemental analysis, X-ray photoelectron spectroscopy and solid-state ¹³C nuclear magnetic resonance spectroscopy of three as-synthesized stationary phases bearing different alkyl chains and different numbers of carbamate groups (octadecyl/one carbamate group, C18C; docosyl/three carbamate groups, C22C³; triacontyl/two carbamate groups, C30C²). The comparative evaluation of these stationary phases using a great variety of analytes, including three sets of isomers of alkylbenzenes, two sets of standard mixtures of polycyclic aromatic hydrocarbons (SRM 1647e and 869b), nine polychlorinated biphenyls, fiveteen N-substituted ureas, ten sulfonylureas, five xanthines and some other phytonutrients, revealed their remarkable applicability in reversed-phase liquid chromatography. Notably, the intercalated carbamate groups rendered the resultant stationary phases compatible with 100% aqueous mobile phase. The suppression of silanol activity was positively related to the number of polar groups embedded in the bonded selector, and the smallest peak tailing factor (1.14) for amitriptyline was obtained by C22C³. The molecular shape-related selectivity was found to be more closely related to the length of the selector's aliphatic chain, as supported by the lowest α_TBN/BaP value (0.31) by C30C². These carbamate-embedded alkyl stationary phases constituted another class of polar-embedded stationary phases possessing a single type of functional ligand.

Interfacial study of clathrates confined in reversed silica pores

Storing methane in clathrates is one of the most promising alternatives for transporting natural gas (NG) as it offers similar gas densities to liquefied and compressed NG while offering lower safety risks. However, the practical use of clathrates is limited given the extremely low temperatures and high pressures necessary to form these structures. Therefore, it has been suggested to confine clathrates in nanoporous materials, as this can facilitate clathrate's formation conditions while preserving its CH4 volumetric storage. Yet, the choice of nanoporous materials to be employed as the clathrate growing platform is still rather arbitrary. Herein, we tackle this challenge in a systematic way by computationally exploring the stability of clathrates confined in alkyl-grafted silica materials with different pore sizes, ligand densities and ligand types. Based on our findings, we are able to propose key design criteria for nanoporous materials favoring the stability of a neighbouring clathrate phase, namely large pore sizes, high ligand densities, and smooth pore walls. We hope that the atomistic insight provided in this work will guide and facilitate the development of new nanomaterials designed to promote the formation of clathrates.

Effects of Residual Silanol on Solid Phase Extraction of Organic Compounds to Octadecylsilyl Silica

Batchwise equilibrium study was carried out on the retention of nonpolar and polar organic compounds to octadecylsilyl (ODS) silicas of different properties at atmospheric pressure. While nonpolar compounds were retained only by distribution on the ODS phase, polar compounds were retained by both distribution and Langmuir-type adsorption on residual silanol. Retention on ODS silica with more silanol proceeded at a higher rate than retention on ODS silica with less silanol and was reversible on this solid phase extraction time-scale. An increase in surface density of ODS decreased the distribution constant, due to a decrease in fraction of ODS functioning as an extracting medium and also decreased the saturated adsorption amount, due to reductions of the residual silanol and the functioning ODS. The ODS silica with the lowest ODS density showed a distribution constant 31 times higher and a saturated adsorption amount 27 times higher than the ODS silica with the highest ODS density. On the other hand, because the interaction between the organic part and the ODS group introduced at higher density is strengthened, the adsorption constant is increased by about 5 times compared to the low density ODS silica. The electronic effects of substituents to nitrogen- and oxygen-containing compounds on retention were discussed. In conclusion, ODS silica with an appreciable amount of residual silanol is superior for solid phase extraction.

Characterization of triacontyl (C-30) liquid chromatographic columns

Differences in the characteristics of seventeen commercial C-30 liquid chromatographic columns were studied for the separation of carotenoid isomers. A mixture consisting of nine xanthophyll and hydrocarbon carotenoids were separated under conditions carefully chosen to reveal changes in selectivity. The influence of the mobile phase composition, column temperature, and mobile phase flow rate were evaluated. Shape selectivity was characterized with Standard Reference Material (SRM) 869b Column Selectivity Test Mixture, for correlation with carotenoid retention behavior. Regular changes were observed across a broad spectrum of shape selectivity characteristics as indicated by SRM 869b. Better separations of carotenoid isomers were achieved with C-30 columns than were possible with C-18 columns, even after optimization of separation conditions.

From in silica to in silico: retention thermodynamics at solid–liquid interfaces

The dynamics of solvated molecules at the solid/liquid interface is essential for a molecular-level understanding for the solution thermodynamics in reversed phase liquid chromatography (RPLC).

Molecular Mechanisms Underlying Solute Retention at Heterogeneous Interfaces

Despite considerable effort, a molecular-level understanding of the mechanisms governing adsorption/desorption in reversed-phase liquid chromatography is still lacking. This impedes rational design of columns and the development of reliable, computationally more efficient approaches to predict the selectivity of a particular column design. Using state-of-the art, validated force fields and free-energy simulations, the adsorption thermodynamics of benzene derivatives is investigated in atomistic detail and provides a quantitative microscopic understanding of retention when compared with experimental data. It is found that pure partitioning or pure adsorption is rather the exception than the rule. Typically, a pronounced ∼1 kcal/mol stabilization on the surface is accompanied by a broad trough indicative of partitioning before the probe molecule incorporates into the mobile phase. The present findings provide a quantitative and rational basis to develop improved effective, coarse-grained computational models and to design columns for specific applications.

A remarkable enhancement of selectivity towards versatile analytes by a strategically integrated H-bonding site containing phase

A double β-alanylated L-glutamide-derived organic phase has been newly designed and synthesized in such a way that integrated H-bonding (interaction) sites make it very suitable for the separation of versatile analytes, including shape-constrained isomers, and nonpolar, polar and basic compounds. The β-alanine residues introduced into two long-chain alkyl group moieties provide ordered polar groups through H-bonding among the amide groups.

Why can organic liquids move easily on smooth alkyl-terminated surfaces?

The dynamic dewettability of a smooth alkyl-terminated sol-gel hybrid film surface against 17 probe liquids (polar and nonpolar, with high and low surface tensions) was systematically investigated using contact angle (CA) hysteresis and substrate tilt angle (TA) measurements, in terms of their physicochemical properties such as surface tension, molecular weight/volume, dielectric constant, density, and viscosity. We found that the dynamic dewettability of the hybrid film markedly depended not on the surface tensions but on the dielectric constants of the probe liquids, displaying lower resistance to liquid drop movement with decreasing dielectric constant (ε < 30). Interfacial analysis using the sum-frequency generation (SFG) technique confirmed that the conformation of surface-tethered alkyl chains was markedly altered before and after contact with the different types of probe liquids. When probe liquids with low dielectric constants were in contact with our surface, CH3 groups were preferentially exposed at the solid/liquid interface, leading to a reduction in surface energy. Because of such local changes in surface energy at the three-phase contact line of the probe liquid, the contact line can move continuously from low-surface-energy (solid/liquid) areas to surrounding high-surface-energy (solid/air) areas without pinning. Consequently, the organic probe liquids with low dielectric constants can move easily and roll off when tilted only slightly, independent of the magnitude of CAs, without relying on conventional surface roughening and perfluorination.

Highly efficient preparation of selectively isotope cluster-labeled long chain fatty acids via two consecutive C(sp3)-C(sp3) cross-coupling reactions

An efficient synthesis involving two copper-catalyzed alkyl-alkyl coupling reactions has been designed to easily access doubly isotope-labeled fatty acids. Such NMR- and IR-active compounds were obtained in excellent overall yields and will be further used for determining the conformation of an alkyl chain of lipidic biomolecules upon interaction with proteins.

Molecular simulation studies of reversed-phase liquid chromatography

Over the past 20 years, molecular simulation methods have been applied to the modeling of reversed-phase liquid chromatography (RPLC). The purpose of these simulations was to provide a molecular-level understanding of: (i) the structure and dynamics of the bonded phase and its interface with the mobile phase, (ii) the interactions of analytes with the bonded phase, and (iii) the retention mechanism for different analytes. However, the investigation of chromatographic systems poses significant challenges for simulations with respect to the accuracy of the molecular mechanics force fields and the efficiency of the sampling algorithms. This review discusses a number of aspects concerning molecular simulation studies of RPLC systems including the historical development of the subject, the background needed to understand the two prevalent techniques, molecular dynamics (MD) and Monte Carlo (MC) methods, and the wealth of insight provided by these simulations. Examples from the literature employing MD approaches and from the authors' laboratory using MC methods are discussed. The former can provide information on chain dynamics and transport properties, whereas the latter techniques are uniquely suited for the investigation of phase and sorption equilibria that underly RPLC retention, and both can be used to elucidate the bonded-chain conformations and solvent distributions.

Molecular shape recognition through self-assembled molecular ordering: evaluation with determining architecture and dynamics

The relationship between molecular gel-forming compound-based double-alkylated L-glutamide-derived functional group-integrated organic phase (Sil-FIP) structure and chromatographic performance is investigated and compared with widely used alkyl phases (C(30), polymeric and monomeric C(18)) as references. The functional group-integrated molecular gel on silica is chemically designed newly in a way that the weak interaction sites are integrated with high orientation and high selectivity can be realized by multiple interactions with the solutes. Its functions can be emphasized by being immobilizable with a terminal carboxyl group and the fact that five amide bonds including β-alanine subunit are integrated per molecule. Furthermore, its self-assembling function can be detected by monitoring of the chiroptical property. Temperature-dependent circular dichroism (CD) intensity was determined as an indicator of chirality for the gel forming compounds. (13)C cross-polarization magic angle spinning (CP/MAS) NMR spectra of the Sil-FIP phase indicate that predominance of gauche conformations exists at higher temperature (above 30 °C). (29)Si CP/MAS NMR were carried out to investigate the degree of cross-linking of the silane and silane functionality of the modified silica. Temperature-dependent (13)C CP/MAS NMR and suspended-state (1)H NMR measurements of the Sil-FIP phase exhibit the dynamic behavior of the alkyl chains. To correlate the NMR and CD results with temperature-dependent chromatographic studies, standard reference materials (SRM 869b and SRM 1647e), column selectivity test mixture for liquid chromatography was employed. Additional shape selectivity text mixtures were also used to clarify the mechanism of shape selectivity performance of Sil-FIP compared with commercially available columns. The evaluation with the spectroscopic and chromatographic analyses presents very important information on the surface morphology of the new organic phase and the molecular recognition process. Integrated and ordered functional groups were investigated to be the main driving force for very high molecular shape selectivity of the Sil-FIP phase.

Role of chromatography in the development of Standard Reference Materials for organic analysis

The certification of chemical constituents in natural-matrix Standard Reference Materials (SRMs) at the National Institute of Standards and Technology (NIST) can require the use of two or more independent analytical methods. The independence among the methods is generally achieved by taking advantage of differences in extraction, separation, and detection selectivity. This review describes the development of the independent analytical methods approach at NIST, and its implementation in the measurement of organic constituents such as contaminants in environmental materials, nutrients and marker compounds in food and dietary supplement matrices, and health diagnostic and nutritional assessment markers in human serum. The focus of this review is the important and critical role that separation science techniques play in achieving the necessary independence of the analytical steps in the measurement of trace-level organic constituents in natural matrix SRMs.

Deposition of dense siloxane monolayers from water and trimethoxyorganosilane vapor

A convenient, laboratory-scale method for the vapor deposition of dense siloxane monolayers onto oxide substrates was demonstrated. This method was studied and optimized at 110 °C under reduced pressure with the vapor of tetradecyltris(deuteromethoxy)silane, (CD(3)O)(3)Si(CH(2))(13)CH(3), and water from the dehydration of MgSO(4)·7H(2)O. Ellipsometric thicknesses, water contact angles, Fourier transform infrared (FTIR) spectroscopy, and electrochemical capacitance measurements were used to probe monolayer densification. The CD(3) stretching mode in the FTIR spectrum was monitored as a function of the deposition time and amounts of silane and water reactants. This method probed the unhydrolyzed methoxy groups on adsorbed silanes. Excess silane and water were necessary to achieve dense, completely hydrolyzed monolayers. In the presence of sufficient silane, an excess of water above the calculated stoichiometric amount was necessary to hydrolyze all methoxy groups and achieve dense monolayers. The excess water was partially attributed to the reversibility of the hydrolysis of the methoxy groups.