Application of functionalized magnetic nanoparticles in sample preparation

A review on molecularly imprinted magnetic solid phase extraction emphasizing the analysis of antibiotics in complex matrices:Design, preparation, and application

Magnetic solid phase extraction (MSPE) has been widely employed in the isolation and enrichment of antibiotics in complex matrices because it presents various unique advantages over traditional SPE including simple operation, fast extraction procedure, low cost and eco-friendliness. In recently years, magnetic molecularly imprinted nanoparticles (MMINs) containing highly specific recognition performance have been widely used to specific extraction of antibiotics under the format of MSPE. In this connection, recent advances of MMINs in the analysis of antibiotic residues are reviewed. Firstly, the common structure of MMINs including core-shell, core-satellite, cavity structure and nanotube/nanosheet-supported structurewere introduced. After that, a main section covers the synthesis strategies of MMINs including one-step preparation and multi-steps preparation (precipitation polymerization, emulsion polymerization, suspension polymerization and surface imprinting technique) were illustrated. Furthermore, the applications of MMINs in the selective extraction of various antibiotic residues (sulfonamides, quinolones, tetracyclines, β-lactams, aminoglycosides and so on) in environmental and food samples were summarized. Finally, the existing problems and future prospects of MMINs were outlined in the final section of the review.

Preparation of waste toner-derived magnetic adsorbent for analysis of lead in aqueous and oil-based foods

Waste toner powder contains carbon and ferrosoferric oxide, meaning it has potential as a magnetic adsorbent. Previous efforts have tried to improve its hydrophilicity for aqueous samples, but not non-aqueous food matrices such as edible oils. In this work, we proposed a one-step hydrothermal carbonization method using 50 % (v/v) acetic acid to prepare carboxyl-functionalised magnetic adsorbent for aqueous and oil-based food samples. Owing to the complexation of carboxyl groups and electrostatic attraction, the adsorption capacity for Pb(II) was 50.3 ± 0.4 mg g-1. Combined with GFAAS, the developed method demonstrated a high enhancement factor (91.0), a low detection limit (0.013 μg L-1) and was also validated by the certified standard reference material, including environmental water, rice flour and tea. Furthermore, successful applications were demonstrated in tap and lake water, orange juice, edible oil and mushrooms with recoveries ranging from 84.4 to 108 %.

Extraction of methamphetamine and pseudoephedrine by modified graphene oxide solid phase extraction method coupled to HPLC-UV in urine sample

Methamphetamine, pseudoephedrine, and related drugs are among the first drugs used for the stimulation of the central nervous system. In this study, two adsorbents based on graphene oxide (GO) were synthesized and used for the analysis of methamphetamine and pseudoephedrine. The prepared nano-adsorbents based on GO in this study were coated by polyaniline (PANI) and Fe3O4/C-nanodot/GO (magnetic adsorbent). The average size of nanoparticles (GO/PANI) was 18.43 nm. The specific surface area and pore size diameter of Fe3O4/C-nanodot/GO were 22.71 m2 g- 1 and 15.23 nm, respectively. Experimental variables affecting the extraction efficiency of the analytes such as pH of the sample solution, amount of adsorbent, extraction time, and type of eluents were investigated and optimized by response surface methodology. Under optimum conditions, GO/PANI and Fe3O4/C-nanodot/GO were considered appropriate solid phase extraction adsorbents for HPLC-based analyses of the studied drugs in human urine samples. However, GO/Fe3O4 nano adsorbent (Fe3O4/C-nanodot/GO) showed superior working condition than GO/PANI. The validated proposed analytical methods can be used for the quantitative determination of methamphetamine and pseudoephedrine in actual samples.

Microextraction Techniques for Sample Preparation of Amphetamines in Urine: A Comprehensive Review

Psychological disorders and dramatic social problems are serious concerns regarding the abuse of amphetamine and its stimulant derivatives worldwide. Consumers of such drugs experience great euphoria along with serious health problems. Determination and quantification of amphetamine-type stimulants are indispensable skills for clinical and forensic laboratories. Analysis of low drug doses in bio-matrices necessitates applications of simple and also effective preparation steps. The preparation procedures not only eliminate adverse matrix effects, but also provide reasonable clean-up and pre-concentration benefits. The current review presents different methods used for sample preparation of amphetamines from urine as the most frequently used biological matrix. The advantages and limitations of various sample preparation methods were discussed focusing on the miniaturized methods.

Analysis and remediation of phthalates in aquatic matrices: current perspectives

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.

Magnetic activated carbon as an adsorbent for extraction of DMMP from aqueous samples followed by GC-IMS analysis

Micro-porous magnetic activated carbon was prepared under ultrasonic irradiation as an adsorbent for dispersed solid phase extraction of dimethyl methyl phosphonate from water samples, before analysis by gas chromatography-ion mobility spectrometry. The magnetic activated carbon was synthesized and characterized by using a vibrating sample magnetometer, Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction techniques. Then, the effects of the amount of sorbent, extraction time and pH of the sample in the dispersive solid phase extraction method were investigated and optimized by the response surface method. The dispersion of 20 mg adsorbent powder in a 50 mL water sample for 5 minutes with chloroform as the desorption solvent showed an average recovery value of 95% for dimethyl methyl phosphonate. Afterward, the method was used successfully for the determination of dimethyl methyl phosphonate in river and spring water. The linear range was obtained to be 0.05-1 μg mL-1. The limit of detection and the limit of quantification were obtained to be 0.02 μg mL-1 and 0.05 μg mL-1 respectively. The analysis also showed good reproducibility with a relative standard deviation value of 3.1%. This method was shown to be easy, fast, reliable, and inexpensive.

Preparation and Application of Magnetic Composites Using Controllable Assembly for Use in Water Treatment: A Review

The use of magnetic composites in wastewater treatment has become widespread due to their high flocculating characteristics and ferromagnetism. This review provides an analysis and summary of the preparation and application of magnetic composites through controllable assembly for use in wastewater treatment. The applications of magnetic composites include the treatment of dye wastewater, heavy metal wastewater, microalgae suspensions, and oily wastewater. Additionally, the recycling and regeneration of magnetic composites have been investigated. In the future, further research could be focused on improving the assembly and regeneration stability of magnetic composites, such as utilizing polymers with a multibranched structure. Additionally, it would be beneficial to explore the recycling and regeneration properties of these composites.

Synthesis and Characterization of SPIONs Encapsulating Polydopamine Nanoparticles and Their Test for Aqueous Cu2+ Ion Removal

The removal of pollutants, such as heavy metals, aromatic compounds, dyes, pesticides and pharmaceuticals, from water is still an open challenge. Many methods have been developed and exploited for the purification of water from contaminants, including photocatalytic degradation, biological treatment, adsorption and chemical precipitation. Absorption-based techniques are still considered among the most efficient and commonly used approaches thanks to their operational simplicity. In recent years, polydopamine-coated magnetic nanoparticles have emerged for the uptake of heavy metals in water treatment, since they combine specific affinity towards pollutants and magnetic separation capacity. In this context, this work focuses on the synthesis of polydopamine (PDA)-coated Super Paramagnetic Iron Oxide Nanoparticles (PDA@SPIONs) as adsorbents for Cu²⁺ ions, designed to serve as functional nanostructures for the removal of Cu²⁺ from water by applying a magnetic field. The synthetic parameters, including the amount of SPIONs and PDA, were thoroughly investigated to define their effects on the nanostructure features and properties. Subsequently, the ability of the magnetic nanostructures to bind metal ions was assessed on Cu²⁺-containing solutions. A systematic investigation of the prepared functional nanostructures was carried out by means of complementary spectroscopic, morphological and magnetic techniques. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) measurements were performed in order to estimate the Cu²⁺ binding ability. The overall results indicate that these nanostructures hold great promise for future bioremediation applications.

Recent advances in development of functional magnetic adsorbents for selective separation of proteins/peptides

Nowadays, proteins separation has attracted great attention in proteomics research. Because the proteins separation is helpful for making an early diagnosis of many diseases. Magnetic nanoparticles are an interesting and useful functional material, and have attracted extensive research interest during the past decades. Because of the excellent properties such as easy surface functionalization, tunable biocompatibility, high saturation magnetization etc, magnetic microspheres have been widely used in isolation of proteins/peptides. Notably, with the rapid development of surface decoration strategies, more and more functional magnetic adsorbents have been designed and fabricated to meet the growing demands of biological separation. In this review, we have collected recent information about magnetic adsorbents applications in selective separation of proteins/peptides. Furthermore, we present a comprehensive prospects and challenges in the field of protein separation relying on magnetic nanoparticles.

Dispersive magnetic solid-phase extraction for capsaicinoid compounds in human serum using LC-HRMS: targeted and non-targeted approaches

A new analytical method based on the use of dispersive magnetic solid-phase extraction (DMSPE) is described for the preconcentration of capsaicin (CAP), dihydrocapsaicin (DCAP), and N-vanillylnonanamide (PCAP) from human serum samples. The influence of several experimental factors affecting the adsorption (nature and amount of magnetic material, adsorption time, and pH) and desorption (nature of solvent, its volume and desorption time) steps was studied. Among seven different nanomaterials studied, the best results were obtained using magnetic multiwalled carbon nanotubes, which were characterized by means of spectrometry- and microscopy-based techniques. Analyses were performed by ultra-high-performance liquid chromatography with quadrupole-time-of-flight mass spectrometry using electrospray ionization in positive mode (UHPLC-ESI-Q-TOF-MS). The developed method was validated by obtaining several parameters, including linearity (0.3-300 μg L^-1 range), and limits of detection which were 0.1, 0.15, and 0.17 μg L^-1 for CAP, DCAP, and PCAP, respectively. The repeatability of the method, expressed as relative standard deviation (RSD, n = 7), varied from 3.4 to 11%. The serum samples were also studied through a non-targeted approach in a search for capsaicinoid metabolites and related compounds. With this objective, the fragmentation pathway of this family of compounds was initially studied and a strategy was established for the identification of novel or less studied capsaicinoid-derived compounds.

Target protein identification of andrographolide based on isomer approach

The target identification of natural products is one of the most challenging issues in the standardized application of traditional Chinese medicine. It is widely recognized that magnetic nanoparticles (MNPs) could function as a tool that capture the target proteins of active molecule. However, the false positives caused by non-specific adsorption should not be ignored. Here, we reported a functionalized MNPs technique that could enrich the target proteins of andrographolide (AG) based on isomers approach. We designed and characterized MNPs and isomers of AG. The combination of the two could be used as an ideal coupling, which provides a feasible method for the target proteins enrichment of AG. In addition, the target proteins were identified by HPLC-MS/MS. Moreover, bioinformatics analysis and systematic computational dockings were performed to search for the interactions between target proteins and AG. Six inflammation-related proteins, including CD4, IKBKB, PKN1, PKN2, YWHAB and YWHAH were proved to be the anti-inflammatory targets of AG. All of the results indicated this integrated system could benefit target identification of bioactive natural products.

Automated and Rapid Easy-to-Use Magnetic Solid-Phase Extraction System for Five Heavy Metals in Cereals and Feeds

A rapid, accurate, and ecofriendly pretreatment plays an extremely important role prior to ICP-MS for heavy metal analysis. In order to improve the pretreatment efficiency, a high-throughput and automatic magnetic solid-phase extraction of five heavy metals (Cd, Pb, Mn, Cu, and Zn) was carried out by a magnet-controlled pretreatment system with an ecofriendly diluted acid as an extracting agent and carboxyl-functionalized magnetic beads as a pretreatment material. Key conditions, including the pH, adsorption time, and eluent solution, were optimized. The time for purification and enrichment was only 8 min. The adsorption capacities of the carboxyl-functionalized magnetic beads were in the range of 152~426 mg g^-1. The preconcentration factor of Cu was 40, and others were 200. In the optimal conditions, the limits of detection for Mn, Zn, Cd, Cu, and Pb by ICP-MS were 3.84, 2.71, 0.16, 11.54, and 6.01 ng L^-1, respectively. The percentage recoveries were in the range of 80~110%, and the relative standard deviations were less than 3%. The developed method was in good agreement with traditional standard microwave digestion. Additionally, the designed system could simultaneously process up to 24 samples within 22 min, reducing the time to less than 1 min/sample. Thus, the proposed auto-MSPE-ICP-MS method was successfully applied to analyze five heavy metals in cereals and feeds with a simple operation and high precision, safety, and reliability.

Factors Affecting the Analytical Performance of Magnetic Molecularly Imprinted Polymers

During the last few years, separation techniques using molecular imprinting polymers (MIPs) have been developed, making certain improvements using magnetic properties. Compared to MIP, Magnetic molecularly imprinted polymers (MMIPs) have high selectivity in sample pre-treatment and allow for fast and easy isolation of the target analyte. Its magnetic properties and good extraction performance depend on the MMIP synthesis step, which consists of 4 steps, namely magnetite manufacture, magnetic coating using modified components, polymerization and template desorption. This review discusses the factors that will affect the performance of MMIP as a selective sorbent at each stage. MMIP, using Fe₃O₄ as a magnetite core, showed strong superparamagnetism; it was prepared using the co-precipitation method using FeCl₃·6H₂O and FeCl₂·H₂O to obtain high magnetic properties, using NH₄OH solution added for higher crystallinity. In magnetite synthesis, the use of a higher temperature and reaction time will result in a larger nanoparticle size and high magnetization saturation, while a higher pH value will result in a smaller particle size. In the modification step, the use of high amounts of oleic acid results in smaller nanoparticles; furthermore, determining the correct molar ratio between FeCl₃ and the shielding agent will also result in smaller particles. The next factor is that the proper ratio of functional monomer, cross-linker and solvent will improve printing efficiency. Thus, it will produce MMIP with high selectivity in sample pre-treatment.

Analytical Methods for Nanomaterial Determination in Biological Matrices

Nanomaterials are materials in which at least one of the three dimensions ranges from 1 to 100 nm, according to the International Organization for Standardization (ISO). Nanomaterials can be categorized according to various parameters, such as their source, their shape, and their origin. Their increasing use in industrial settings, everyday items, electronic devices, etc. poses an environmental and biological risk that needs to be assessed and appropriately addressed. The development of reliable analytical methods for both characterization and quantification of nanomaterials in various matrices is essential. This review summarized the recent trends in analytical methodologies for the characterization and determination of nanoparticles in biological matrices.

Relative humidity sensing using THz metasurfaces combined with polyvinyl alcohol

Relative humidity (RH) plays an important role in almost every industrial field. Thus, the detection of RH is of great significance in these fields. Terahertz (THz) waves are extremely sensitive to the changes in RH because water absorbs strongly in this electromagnetic band. In this paper, a RH sensor based on THz metasurfaces combined with polyvinyl alcohol (PVA) is proposed. Different from the conventional metasurface sensor, our sensor includes a PVA layer that is sandwiched between the metal structure and the substrate. The improved design is able to enhance the interaction between the electric field and the water molecules absorbed in the PVA layer, and the sensitivity of the humidity sensor can reach 0.34 GHz/%RH, which is more than twice that of the conventional metasurface sensor. These results show that the proposed sensor can be used for the detection of RH with high reliability and high sensitivity, which open a new, to the best of our knowledge, avenue for RH sensing using THz spectroscopy.

Sporopollenin based materials as a versatile choice for the detoxification of environmental pollutants - A review

Before making the transfer to land, plants survive in water for millions of years to avoid the severe circumstances that prevail on lands, such as drought and UV radiation. All land plant spores are coated in sporopollenin, a substance that has developed to endow pollen and spore shells with exceptional, one-of-a-kind qualities. In a nutshell, sporopollenin-coated spores are a unique invention only seen in land plants. Sporopollenin, discovered in the outer exine layer of pollen walls, is a lipid and phenolic-based polymer with high carbon, hydrogen, and oxygen cross-linking. Products based on sporopollenin can remediate toxic pollutant contamination in the aquatic environment. This research and development are now underway. In this review, we show how sporopollenin-based adsorbents act in environmental challenges and their immense promise for this application via remarkable physical and chemical characteristics. A comparison is made of the benefits of various sporopollenin-modified structures. This strategy will further our understanding of how a biopolymer's structure can be accommodated to address emerging environmental challenges, revealing more about sporopollenin's dynamical nature.

Solid-phase extraction techniques based on nanomaterials for mycotoxin analysis: An overview for food and agricultural products

Mycotoxin contamination is a globally concerned problem for food and agricultural products since it may directly or indirectly induce severe threats to human health. Sensitive and selective screening is an efficient strategy to prevent or reduce human and animal exposure to mycotoxins. However, enormous challenges exist in the determination of mycotoxins, arising from complex sample matrices, trace-level analytes, and the co-occurrence of diverse mycotoxins. Appropriate sample preparation is essential to isolate, purify, and enrich mycotoxins from complicated matrices, thus decreasing sample matrix effects and lowering detection limits. With the cross-disciplinary development, new solid-phase extraction strategies have been exploited and integrated with nanotechnology to meet the challenges of mycotoxin analysis. This review summarizes the advance and progress of solid-phase extraction techniques as the methodological solutions for mycotoxin analysis. Emphases are paid on nanomaterials fabricated as trapping media of SPE techniques, including carbonaceous nanoparticles, metal/metal oxide-based nanoparticles, and nanoporous materials. Advantages and limitations are discussed, along with the potential prospects. This article is protected by copyright. All rights reserved.

Magnetic Molecularly Imprinted Polymers: An Update on Their Use in the Separation of Active Compounds from Natural Products

During the last few years, separation techniques using molecularly imprinted polymers (MIPs) have been developed, making breakthroughs using magnetic properties. Compared to conventional MIPs, magnetic molecularly imprinted polymers (MMIPs) have advantages in sample pretreatment due to their high specificity and selectivity towards analytes as a result of their larger specific surface areas and highly accessible specific binding sites. The techniques of isolation of active compounds from natural products usually require very long process times and low compound yields. When MMIPs are used in sample separation as Solid Phase Extraction (SPE) sorbents, the MMIPs are introduced into the dissolved sample and spread evenly, and they form bonds between the analyte and the MMIPs, which are then separated from the sample matrix using an external magnetic field. This process of separating analytes from the sample matrix makes the separation technique with MMIPs very simple and easy. This review discusses how to synthesize MMIPs, which factors must be considered in their synthesis, and their application in the separation of active compounds from natural products. MMIPs with magnetic core-shells made by co-precipitation can be a good choice for further development due to the high synthesis yield. Further optimization of the factors affecting the size and distribution of magnetic core-shell particles can obtain higher synthesis yields of MMIPs with higher adsorption capacity and selectivity. Thus, they can isolate target compounds from natural plants in high yields and purity.

Liquid- and Solid-based Separations Employing Ionic Liquids for the Recovery of Platinum Group Metals Typically Encountered in Catalytic Converters: A Review

The wide application range and ascending demand for platinum group metals combined with the progressive depletion of their natural resources renders their efficient recycling a very important and pressing matter. Primarily environmental considerations associated with state-of-the-art recovery processes have shifted the focus of the scientific community toward the investigation of alternative recycling approaches. Within this context, ionic liquids have gained considerable attention in the last two decades chiefly sparked by properties such as tunabilty, low-volatility, and relatively easy recyclability. In this review an understanding of the state-of-the-art processes, including their drawbacks and limitations, is provided. The core of the discussion is focused on platinum group metal recovery with ionic liquid-based systems. A brief insight in some environmental considerations related to ionic liquids is also provided while some discussion on research gaps, common misconceptions related to ionic liquids and outlook on unresolved issues could not be absent from this review.

Magnetic nanoparticles coated with carboxylate-terminated carbosilane dendrons as a reusable and green approach to extract/purify proteins

Extraction/purification of proteins, at both analytical and industrial levels, is a limiting step that usually requires the use of organic solvents and involves tedious work and a high cost. This work proposes a more sustainable alternative based on the use of magnetic nanoparticles (MNPs) coated with carboxylate-terminated carbosilane dendrons. MNPs coated with first- and second-generation carbosilane dendrons and bare MNPs were employed for the extraction of proteins with different molecular weights and charges. Interaction of proteins with MNPs significantly varied with the pH, the protein, and the dendron generation (different sizes and number of charges in the periphery). Optimal dendron:protein molar ratios and suitable conditions for disrupting interactions after protein extraction were also researched. Second-generation dendron-coated MNPs showed 100% retention capability for all proteins when using acidic conditions. They were reused without losing magnetism or interaction capacity after a disruption of protein-dendron interactions with 0.2% SDS at 100 °C for 10 min. The capacity of dendron-coated MNPs was successfully applied to the recovery/purification of proteins from two food by-products, olive seeds and cheese whey.

MALDI-TOF MS and Magnetic Beads for Rapid Seafood Allergen Tests

We developed a strategy using immunomagnetic separation (IMS) coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to test seafood allergens. The protocol employed commercial magnetic beads (MBs) functionalized with anti-human IgE antibodies to carry out the IMS of IgEs in blood samples, followed by capture of allergens from seafood protein extracts for allergy analysis. After elution, the captured allergens were identified by MALDI-TOF MS and HPLC-MS/MS. The non-specific adsorption of MBs to biomolecules, the reproducibility and sensitivity of the protocol were investigated. The method shows consistent results with enzyme-linked immunosorbent assay tests. The false positive rate of the present method for the allergy test is 0%. The protocol was applied to detect the allergens in greasy-back shrimp for checking the allergenicity of patients' serum. Cooking fish as soup may effectively decrease the allergenicity. The method can be potentially used to identify unknown allergens of seafood to ensure the safety of allergic patients.

Preparation and application of modified three-dimensional cellulose microspheres for paclitaxel targeted separation

In this article, we successfully prepared three-dimensional cellulose microspheres modified by molecularly imprinted polymer for paclitaxel recognition and separation (3D-CM &PTX&MIPs). The material was characterized by Fourier Transform Infrared spectroscopy (FTIR), Scanning Electron Microscope (SEM), Thermogravimetric Analysis (TG) and diffraction of X-rays (XRD). Under the optimized adsorption conditions, the maximum adsorption capacity reached 65.7 mg/g. And after 5 runs of reuse, (3D-CM&PTX&MIPs) still maintained a reusability rate of 90%. Besides, (3D-CM&PTX&MIPs) showed excellent selectivity for target PTX. Finally, (3D-CM&PTX&MIPs) was used for PTX recognition and separation in the extracts of yew leaves. This research laid a good foundation and scientific basis for the efficient, environmentally friendly, and rapid enrichment of metabolites in plants using bio-based molecularly imprinted polymers.

Biosorption of Cr(VI) using coconut fibers from agro-industrial waste magnetized using magnetite nanoparticles

Herein, the biosorption of Cr(VI) by magnetized coconut fibres obtained from agricultural waste has been described. Magnetization was achieved by incorporating magnetite nanoparticles into the fibres by a coprecipitation reaction in alkaline media. The biosorption capacity of the fibres was evaluated by two series of experiments. In the first series, 500 mg L^-1 of the biosorbent was added to a 50 mg L^-1 K₂Cr₂O₇ solution at 28 °C and stirred at 200 rpm and the pH was varied from 1 to 13 to determine the optimum pH value. The second series of experiments evaluated the sorption capacity of the fibres at the optimum pH, under the same agitation speed and temperature but with an adsorbate concentration of 100 mg L^-1. The biosorbents were characterized using Fourier transform-infrared spectroscopy, inductively coupled plasma-atomic emission spectroscopy, scanning electron microscopy, dispersive X-ray fluorescence, and X-ray powder diffraction. The biosorption experiments demonstrated that the magnetization process increased the biosorption capacity of the material. Optimum biosorption occurred at pH 2, and at optimal conditions, the best adsorptive efficiency exceeded 90%, reaching a biosorption capacity of 87.38 mg g^-1 for the magnetized fibre and 23.87 mg g^-1 for the natural fibre, with an equilibrium time of less than 20 min.

Magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples

This review focuses on magnetic nanomaterials as sorbents for trace elements analysis in environmental and biological samples. The design and preparation of magnetic nanomaterials with specific functional groups for trace elemental analysis are summarized, along with relevant adsorption mechanism. The application of these magnetic sorbents in different operation modes for the quantification of trace elements and their species in environmental and biological samples are discussed. The trend of development in this field is also prospected.

Molecularly Imprinted Polymers for Dispersive (Micro)Solid Phase Extraction: A Review

The review describes the development of batch solid phase extraction procedures based on dispersive (micro)solid phase extraction with molecularly imprinted polymers (MIPs) and magnetic MIPs (MMIPs). Advantages and disadvantages of the various MIPs for dispersive solid phase extraction and dispersive (micro)solid phase extraction are discussed. In addition, an effort has also been made to condense the information regarding MMIPs since there are a great variety of supports (magnetite and magnetite composites with carbon nanotubes, graphene oxide, or organic metal framework) and magnetite surface functionalization mechanisms for enhancing MIP synthesis, including reversible addition-fragmentation chain-transfer (RAFT) polymerization. Finally, drawbacks and future prospects for improving molecularly imprinted (micro)solid phase extraction (MIMSPE) are also appraised.

Magnetic-molecularly imprinted polymers in electrochemical sensors and biosensors

Magnetic particles, as well as molecularly imprinted polymers, have revolutionized separation and bioanalytical methodologies in the 1980s due to their wide range of applications. Today, biologically modified magnetic particles are used in many scientific and technological applications and are integrated in more than 50,000 diagnostic instruments for the detection of a huge range of analytes. However, the main drawback of this material is their stability and high cost. In this work, we review recent advances in the synthesis and characterization of hybrid molecularly imprinted polymers with magnetic properties, as a cheaper and robust alternative for the well-known biologically modified magnetic particles. The main advantages of these materials are, besides the magnetic properties, the possibility to be stored at room temperature without any loss in the activity. Among all the applications, this work reviews the direct detection of electroactive analytes based on the preconcentration by using magnetic-MIP integrated on magneto-actuated electrodes, including food safety, environmental monitoring, and clinical and pharmaceutical analysis. The main features of these electrochemical sensors, including their analytical performance, are summarized. This simple and rapid method will open the way to incorporate this material in different magneto-actuated devices with no need for extensive sample pretreatment and sophisticated instruments.

Preparation of environmental samples for chemical speciation of metal/metalloids: A review of extraction techniques

Chemical speciation is a relevant topic in environmental chemistry since the (eco)toxicity, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). Maintaining the chemical stability of the species and avoiding equilibrium disruptions during the sample treatment is one of the biggest challenges in chemical speciation, especially in environmental matrices where the level of concomitants/interferents is normally high. To achieve this task, strategies based on chemical properties of the species can be carried out and pre-concentration techniques are often needed due to the low concentration ranges of many species (μg L^-1 - ng L^-1). Due to the significance of the topic and the lack of reviews dealing with sample preparation of metal (loid)s (usually, sample preparation reviews focus on the total metal content), this work is presented. This review gives an up-to-date overview of the most common sample preparation techniques for environmental samples (water, soil, and sediments), with a focus on speciation of metal/metalloids and determination by spectrometric techniques. Description of the methods is given, and the most recent applications (last 10 years) are presented.

Synthesis and applications of surface-modified magnetic nanoparticles: progress and future prospects

The growing use of magnetic nanoparticles (MNPs) demands cost-effective methods for their synthesis that allow proper control of particle size and size distribution. The unique properties of MNPs include high specific surface area, ease of functionalization, chemical stability and superparamagnetic behavior, with applications in catalysis, data and energy storage, environmental remediation and biomedicine. This review highlights breakthroughs in the use of MNPs since their initial introduction in biomedicine to the latest challenging applications; special attention is paid to the importance of proper coating and functionalization of the particle surface, which dictates the specific properties for each application. Starting from the first report following LaMer’s theory in 1950, this review discusses and analyzes methods of synthesizing MNPs, with an emphasis on functionality and applications. However, several hurdles, such as the design of reactors with suitable geometries, appropriate control of operating conditions and, in particular, reproducibility and scalability, continue to prevent many applications from reaching the market. The most recent strategy, the use of microfluidics to achieve continuous and controlled synthesis of MNPs, is therefore thoroughly analyzed. This review is the first to survey continuous microfluidic coating or functionalization of particles, including challenging properties and applications.

Simultaneous express immunoassay of multiple cardiac biomarkers with an automatic platform in human plasma

C-reactive protein, cystatin C, myoglobin, and D-dimer represent the inflammatory or thromboembolic status of the patient and play important roles in early diagnostics of acute myocardial infarction. Each protein can indicate some health problems, but their simultaneous detection can be crucial for differential diagnostics. The express analysis of these proteins in a small drop of plasma was developed using magnetic beads. The suggested method is based on immunomagnetic extraction of the target analyte from plasma samples and its simultaneous labelling by fluorescent dye. Reaction time was optimized for quantification of cardiac biomarkers in the spike solutions and human plasma samples. In this paper, we developed a one-protein detection technique for each cardiac biomarker and united it to a four-protein facility using an automatic platform. The proposed technique requires only 17 μL of the human plasma and takes 14 min for four-protein measuring. The suggested technique covers concentration difference by more than two orders of magnitude and demonstrates analytical applicability by measurements of human plasma samples of 16 volunteers.

A Review on Polymer Nanocomposites and Their Effective Applications in Membranes and Adsorbents for Water Treatment and Gas Separation

Globally, environmental challenges have been recognised as a matter of concern. Among these challenges are the reduced availability and quality of drinking water, and greenhouse gases that give rise to change in climate by entrapping heat, which result in respirational illness from smog and air pollution. Globally, the rate of demand for the use of freshwater has outgrown the rate of population increase; as the rapid growth in town and cities place a huge pressure on neighbouring water resources. Besides, the rapid growth in anthropogenic activities, such as the generation of energy and its conveyance, release carbon dioxide and other greenhouse gases, warming the planet. Polymer nanocomposite has played a significant role in finding solutions to current environmental problems. It has found interest due to its high potential for the reduction of gas emission, and elimination of pollutants, heavy metals, dyes, and oil in wastewater. The revolution of integrating developed novel nanomaterials such as nanoparticles, carbon nanotubes, nanofibers and activated carbon, in polymers, have instigated revitalizing and favourable inventive nanotechnologies for the treatment of wastewater and gas separation. This review discusses the effective employment of polymer nanocomposites for environmental utilizations. Polymer nanocomposite membranes for wastewater treatment and gas separation were reviewed together with their mechanisms. The use of polymer nanocomposites as an adsorbent for toxic metals ions removal and an adsorbent for dye removal were also discussed, together with the mechanism of the adsorption process. Patents in the utilization of innovative polymeric nanocomposite membranes for environmental utilizations were discussed.

Extraction of Cyproheptadine as Potent Appetizing Stimulant in Herbal Supplements by Efficient Carbon Nitride Nanosheets as Dispersive Solid Phase Extraction Adsorbent

Background: Application of natural-based herbal medicine is on a growing trend in some countries and people prefer to use plant-originated drugs rather than chemical-based ones. The present study describes an interesting sample preparation method for extraction and determination of cyproheptadine in herbal supplements as appetizing stimulant by using carbon nitride nanosheets as dispersive solid phase extraction method coupled with HPLCUV. Methods: Various techniques used for characterization of adsorbent such as: Infrared spectroscopy (IR), scanning electron microscopy (SEM), Zeta potential analysis and powder X-ray diffraction (XRD). Optimization of the important extraction parameters were conducted by one parameter-at-a time method. Next, method validation was carried out. Results: The optimized cyproheptadine extraction parameters were introduced and under optimized conditions the method presented a good linearity in the concentration range of 300-2000 ng/g. The limit of detection (LOD) was 100 ng/g for the introduced method. Conclusion: Quantitative analysis of fifteen real samples (Tablets or capsules) by proposed method confirmed the illegal presence of cyproheptadine in herbal appetizing stimulants supplements of the markets.

Multi-Walled Carbon Nanotubes for Magnetic Solid-Phase Extraction of Six Heterocyclic Pesticides in Environmental Water Samples Followed by HPLC-DAD Determination

Magnetic multi-walled carbon nanotubes were prepared as magnetic solid-phase extraction (MSPE) adsorbent for the enrichment of six heterocyclic pesticides in environmental water samples, including imidacloprid, triadimefon, fipronil, flusilazole, chlorfenapyr and fenpyroximate. Then six heterocyclic pesticides were separated and determined by high-performance liquid chromatography-diode-array detector (HPLC-DAD). Major factors influencing MSPE efficiency, including the dose of mag-multi-walled carbon nanotubes (mag-MWCNTs), extraction time, solution pH, salt concentration, type and volume of eluent and desorption time were investigated. Under the optimized conditions, the enrichment factor of the method reached to 250. The linearity was achieved within 0.05–10.0 μg/L for imidacloprid and chlorfenapyr, 0.10–10.0 μg/L for fipronil, flusilazole, triadimefon and fenpyroximate. Limits of detection were in the range of 0.01–0.03 μg/L. Good precision at three spiked levels were 1.1–11.2% (intra-day) and 1.7–11.0% (inter-day) with relative standard deviation of peak area, respectively. The developed method was utilized to analyze tap water, river water and reservoir water samples and recoveries at three spiked concentration levels ranged from 72.2% to 107.5%. The method was proved to be a convenient, rapid and practical method for sensitive determination of heterocyclic pesticides.

Facile synthesis of nanogels modified Fe3O4@Ag NPs for the efficient adsorption of bovine & human serum albumin

This article describes the preparation of Fe₃O₄ nanoparticles and its decoration with a layer of tiny Ag nanoparticles at room temperature. Later on, the synthesized Fe₃O₄@Ag heterostructures were protected with Silica and finally modified with Poly(N-isopropyl acrylamide) (PNIPA) nanogels through post-synthesis method to get multifunctional (superparamagnetic, plasmonic and thermosensitive) nanocomposite. The structural characteristics of Fe₃O₄@Ag@SiO₂-PNIPA nanogels composite were investigated by instrumental techniques such as Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD) and Vibrating Sample Magnetometer (VSM). The average particles diameter was calculated from XRD data through Scherer formula and it was found as 14 nm. The Fe₃O₄@Ag@SiO₂-PNIPA polymeric composites were assessed for the adsorption of Bovine Serum Albumin (BSA) and Human Serum Albumin (HSA) proteins from aqueous media. The adsorption data of BSA and HSA were best explained by Langmuir isotherm model with maximum adsorption capacities of 322 and 166 (mg/g) respectively showing mono-layer adsorption. The kinetics data for both the proteins were fairly interpreted by pseudo-second-order model. Thermodynamics studies revealed that the adsorption phenomena of BSA and HSA on the surface of Fe₃O₄@Ag@SiO₂-PNIPA nanogels composite are spontaneous and exothermic.

Recent Applications of Magnetic Nanoparticles in Food Analysis

Nanotechnology has become a topic of interest due to the outstanding advantages that the use of nanomaterials offers in many fields. Among them, magnetic nanoparticles (m-NPs) have been one of the most widely applied in recent years. In addition to the unique features of nanomaterials in general, which exclusively appear at nanoscale, these present magnetic or paramagnetic properties that result of great interest in many applications. In particular, in the area of food analysis, the use of these nanomaterials has undergone a considerable increase since they can be easily separated from the matrix in sorbent-based extractions, providing a considerable simplification of the procedures. This allows reducing cost and giving fast responses, which is essential in the food trade to guarantee consumer safety. These materials can also be easily tunable, providing higher selectivity. Moreover, their particular electrical, thermal and optical characteristics allow enhancing sensor signals, increasing the sensitivity of the approaches based on this type of device. The aim of this review article is to summarise the most remarkable applications of m-NPs in food analysis in the last five years (2016–2020) showing a general view of the use of such materials in the field.

Micro- and nano-sized amine-terminated magnetic beads in a ligand fishing assay

Functionalized micro- and nano-sized magnetic beads (MBs) have been widely used as versatile supports for proteins, enzymes, and drugs. Immobilized protein on MB surfaces has been successfully applied for ligand fishing assays allowing for direct identification of active ligands from complex mixtures, such as natural products and synthetic libraries. MBs with different properties such as different core compositions, sizes, coatings, and surface modifications are available commercially. Studies have been conducted to understand the role of these properties for ligand fishing assays. Here we evaluated, for the first time, the effect of MB size on the ligand fishing assay for acetylcholinesterase from Electrophorus electricus (AChE). For this purpose, four commercially available amine-terminated magnetic particles with diameters ranging from 4.5 nm to 106 μm were evaluated to fish out galantamine, a well-known AChE inhibitor, from an aqueous solution. All MBs were efficient at using glutaraldehyde to covalently immobilize AChE. The particles with diameters of about 1 μm (small microparticles) presented a higher protein mass capacity per milligram of particle than did those with diameters of about 4.5 nm (nanoparticles) and those with diameters of about 106 μm (large microparticles). The influence of these supports on the produced AChE-MBs with regards to hydrolysis turnover and ligand fishing was evaluated and is fully discussed.

Deep eutectic solvent-based magnetic colloidal gel assisted magnetic solid-phase extraction: A simple and rapid method for the determination of sex hormones in cosmetic skin care toners

A simple rapid and efficient deep eutectic solvent-based magnetic colloidal gel (DES-MCG) assisted magnetic solid-phase extraction (MSPE) method followed by high performance liquid chromatography with a diode array detector (HPLC-DAD) was established for determination of four sex hormones (including ethinylestradiol, norgestrel, megestrol acetate and medroxyprogesterone acetate) in cosmetic skin care toners. The DES-MCG with the desirable advantages of high adsorbing ability was prepared by combining choline chloride/urea deep eutectic solvent and magnetic multiwalled carbon nanotubes (MMWCNTs). The synthesized DES-MCG was characterized using fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometry (VSM). The cosmetic skin care toners were concentrated by a rotary evaporator and the obtained solutions were further purified by DES-MCG assisted magnetic solid-phase extraction. Response surface methodology (RSM) was applied for efficient optimization of the main variables in the extraction procedure. Under the optimized conditions, method detection limits and method quantitation limits were in the range of 1.2-6.6 ng mL^-1 and 4.4-26.6 ng mL^-1, respectively. The recoveries of the four sex hormones in different cosmetic skin care toners ranged from 80.1% to 118.8% and the precisions were no more than 0.35%. The developed method was successfully applied for the determination of sex hormones in cosmetic skin care toners.

Doxorubicin-Gelatin/Fe3O4-Alginate Dual-Layer Magnetic Nanoparticles as Targeted Anticancer Drug Delivery Vehicles

In this study, magnetic nanoparticles composed of a core (doxorubicin-gelatin) and a shell layer (Fe₃O₄-alginate) were developed to function as targeted anticancer drug delivery vehicles. The anticancer drug doxorubicin (DOX) was selected as a model drug and embedded in the inner gelatin core to obtain high encapsulation efficiency. The advantage of the outer magnetic layer is that it targets the drug to the tumor tissue and provides controlled drug release. The physicochemical properties of doxorubicin-gelatin/Fe₃O₄-alginate nanoparticles (DG/FA NPs) were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction. The mean diameter of DG/FA NPs, which was determined using a zeta potential analyzer, was 401.8 ± 3.6 nm. The encapsulation rate was 64.6 ± 11.8%. In vitro drug release and accumulation were also studied. It was found that the release of DOX accelerated in an acidic condition. With the manipulation of an external magnetic field, DG/FA NPs efficiently targeted Michigan Cancer Foundation-7 (MCF-7) breast cancer cells and showed in the nucleus after 6 h of incubation. After 12 h of incubation, the relative fluorescence intensity reached 98.4%, and the cell viability of MCF-7 cells decreased to 52.3 ± 4.64%. Dual-layer DG/FA NPs could efficiently encapsulate and deliver DOX into MCF-7 cells to cause the death of cancer cells. The results show that DG/FA NPs have the potential for use in targeted drug delivery and cancer therapy.