1
|
Identification of spectral responses of different plastic materials by means of multispectral imaging. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2024; 26:802-813. [PMID: 38329100 DOI: 10.1039/d3em00324h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/09/2024]
Abstract
In this work, multispectral imaging (MSI) is introduced as an innovative, practical, and non-invasive solution capable of identifying and detecting (micro)plastics. MSI holds significant appeal for industry due to its flexibility, ease of implementation, and portability. The integration of MSI with Principal Components Analysis (PCA) enables precise identification of different plastics and differentiation of microplastics within mixtures. The technique successfully identifies and quantifies the pure spectral response (endmembers) of each microplastic in every pixel of the original image. As a result, the model excels in distinguishing specific plastic materials from their surrounding backgrounds. This novel approach facilitates the identification of randomly dispersed microplastics in water.
Collapse
|
2
|
Mining strategies for isolating plastic-degrading microorganisms. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 346:123572. [PMID: 38369095 DOI: 10.1016/j.envpol.2024.123572] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/27/2023] [Revised: 01/29/2024] [Accepted: 02/13/2024] [Indexed: 02/20/2024]
Abstract
Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions.
Collapse
|
3
|
Identification of microplastics extracted from field soils amended with municipal biosolids. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 907:168007. [PMID: 37871825 DOI: 10.1016/j.scitotenv.2023.168007] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/23/2023] [Revised: 10/19/2023] [Accepted: 10/20/2023] [Indexed: 10/25/2023]
Abstract
Microplastic particles in arable soil are expected to impact the environment and potentially human health. The application of municipal biosolids (MBs) to agricultural land presents a further dilemma in that biosolids act as a fertilizer for crop growth, and a disposal pathway for wastewater treatment plants. They are also a direct path for emerging contaminants, such as microplastics to enter the terrestrial environment. Reliable methods are needed to identify and quantify microplastics, found in agricultural soils to determine how microplastics are being cycled in the terrestrial environment. In this study, we developed a method for extracting microplastics from soil, and characterized their composition and identity for particles sized 5 μm to 2 mm. Method development was initially completed using natural soils spiked with microplastics and MBs, followed by the analyses of soil sampled from an agricultural field where MBs were recently applied at a rate of 13 tons dw/ha. The procedures that used the spiked samples showed that microplastics can be reliably extracted from soil in a laboratory setting, and identified and semi-quantified by thermogravimetric analysis combined with Fourier-transform infrared spectroscopy (TGA-FTIR). However, when the same methods were applied to the soil samples collected from the agricultural field, reproducibility became a challenge, as the number and type of microplastics changed even within the same soils (i.e., collected the same day from the same exact location). The variation in reproducibility observed between laboratory and field samples underscores the significant heterogeneity present in the environment. This heterogeneity, in turn, affects the identification and quantity of microplastics detected, a phenomenon observed even when comparing different fields within a single treatment regimen.
Collapse
|
4
|
Microplastic contamination in Thai vinegar crabs (Episesarma mederi), giant mudskippers (Periophthalmodon schlosseri), and their surrounding environment from the Bang Pu mangrove forests, Samut Prakan province, Thailand. MARINE POLLUTION BULLETIN 2024; 198:115849. [PMID: 38056288 DOI: 10.1016/j.marpolbul.2023.115849] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2023] [Revised: 08/23/2023] [Accepted: 11/24/2023] [Indexed: 12/08/2023]
Abstract
The mangrove ecosystem becomes the receptacle for both land- and marine-based plastic waste. This study examines MPs contamination in the Bang Pu mangrove forests (BPMFs) in the inner Gulf of Thailand. For this, Thai vinegar crabs (TVCs) (Episesarma mederi) and giant mudskippers (GMs) (Periophthalmodon schlosseri) were investigated with their surrounding environment in both rainy and dry seasons. Two-step digestion was employed for biota samples. MPs abundance ranged from 7.5 ± 3.8 to 15.9 ± 6.7 items/individual in TVCs and 6.2 ± 5.0 to 10.6 ± 2.6 items/individual in GMs. MPs in small-size ranges (<0.5 mm) were predominant. Fiber MPs were mostly detected in the rainy season. Most MPs were transparent with polyethylene and polypropylene as dominant polymers in all samples. Bioaccumulation was not observed in GMs. The results indicated the imperiled status of MPs contamination in TVCs and GMs with contaminated surrounding environments.
Collapse
|
5
|
A review on constructive classification framework of research trends in analytical instrumentation for secondary micro(nano)plastics: What is new and what needs next? ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 335:122320. [PMID: 37544402 DOI: 10.1016/j.envpol.2023.122320] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/29/2023] [Revised: 06/14/2023] [Accepted: 08/03/2023] [Indexed: 08/08/2023]
Abstract
Secondary micro(nano)plastics generated from the degradation of plastics pose a major threat to environmental and human health. Amid the growing research on microplastics to date, the detection of secondary micro(nano)plastics is hampered by inadequate analytical instrumentation in terms of accuracy, validation, and repeatability. Given that, the current review provides a critical evaluation of the research trends in instrumental methods developed so far for the qualitative and quantitative determination of micro(nano)plastics with an emphasis on the evolution, new trends, missing links, and future directions. We conducted a meta-analysis of the growing literature surveying over 800 journal articles published from 2004 to 2022 based on the Web of Science database. The significance of this review is associated with the proposed novel classification framework to identify three main research trends, viz. (i) preliminary investigations, (ii) current progression, and (iii) novel advances in sampling, characterization, and quantification targeting both micro- and nano-sized plastics. Field Flow Fractionation (FFF) and Hydrodynamic Chromatography (HDC) were found to be the latest techniques for sampling and extraction of microplastics. Fluorescent Molecular Rotor (FMR) and Thermal Desorption-Proton Transfer Reaction-Mass Spectrometry (TD-PTR-MS) were recognized as the modern developments in the identification and quantification of polymer units in micro(nano)plastics. Powerful imaging techniques, viz. Digital Holographic Imaging (DHI) and Fluorescence Lifetime Imaging Microscopy (FLIM) offered nanoscale analysis of the surface topography of nanoplastics. Machine learning provided fast and less labor-intensive analytical protocols for accurate classification of plastic types in environmental samples. Although the existing analytical methods are justifiable merely for microplastics, they are not fully standardized for nanoplastics. Future research needs to be more inclined towards secondary nanoplastics for their effective and selective analysis targeting a broad range of environmental and biological matrices.
Collapse
|
6
|
Unveiling Fragmentation of Plastic Particles during Biodegradation of Polystyrene and Polyethylene Foams in Mealworms: Highly Sensitive Detection and Digestive Modeling Prediction. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2023; 57:15099-15111. [PMID: 37751481 DOI: 10.1021/acs.est.3c04406] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/28/2023]
Abstract
It remains unknown whether plastic-biodegrading macroinvertebrates generate microplastics (MPs) and nanoplastics (NPs) during the biodegradation of plastics. In this study, we utilized highly sensitive particle analyzers and pyrolyzer-gas chromatography mass spectrometry (Py-GCMS) to investigate the possibility of generating MPs and NPs in frass during the biodegradation of polystyrene (PS) and low-density polyethylene (LDPE) foams by mealworms (Tenebrio molitor larvae). We also developed a digestive biofragmentation model to predict and unveil the fragmentation process of ingested plastics. The mealworms removed 77.3% of ingested PS and 71.1% of ingested PE over a 6-week test period. Biodegradation of both polymers was verified by the increase in the δ13C signature of residual plastics, changes in molecular weights, and the formation of new oxidative functional groups. MPs accumulated in the frass due to biofragmentation, with residual PS and PE exhibiting the maximum percentage by number at 2.75 and 7.27 μm, respectively. Nevertheless, NPs were not detected using a laser light scattering sizer with a detection limit of 10 nm and Py-GCMS analysis. The digestive biofragmentation model predicted that the ingested PS and PE were progressively size-reduced and rapidly biodegraded, indicating the shorter half-life the smaller plastic particles have. This study allayed concerns regarding the accumulation of NPs by plastic-degrading mealworms and provided critical insights into the factors controlling MP and NP generation during macroinvertebrate-mediated plastic biodegradation.
Collapse
|
7
|
Quantifying environmental emissions of microplastics from urban rivers in Melbourne, Australia. MARINE POLLUTION BULLETIN 2023; 189:114709. [PMID: 36821931 DOI: 10.1016/j.marpolbul.2023.114709] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2022] [Revised: 01/31/2023] [Accepted: 02/04/2023] [Indexed: 06/18/2023]
Abstract
This study aims to understand the amount and type of microplastics flowing into Port Phillip Bay from urban rivers around Melbourne. Water samples were collected from the Patterson, Werribee, Maribyrnong, and Yarra Rivers, which contribute 97 % to the total flow into Port Phillip Bay. On average, the rivers contained a mean of 9 ± 15 microplastics/L and ranged from 4 ± 3 microplastics/L (Patterson) to 22 ± 11 microplastics/L (Werribee). Of the eight polymers investigated, polyamide and polypropylene were the most frequently detected polymers. Using the mean concentration of each river, the flow of microplastics into Port Philip Bay was estimated to be 7.5 × 106 microplastics per day and 3.7 × 1010 microplastics per year. To fully understand the fate and transport of microplastics into Port Phillip Bay, this study would be the foundation for a more in-depth investigation. Here, further samples will be collected at more points along the river and at the midpoint of each season.
Collapse
|
8
|
Microfluidics as a Ray of Hope for Microplastic Pollution. BIOSENSORS 2023; 13:332. [PMID: 36979544 PMCID: PMC10046247 DOI: 10.3390/bios13030332] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/15/2023] [Revised: 02/17/2023] [Accepted: 02/20/2023] [Indexed: 06/18/2023]
Abstract
Microplastic (MP) pollution is rising at an alarming rate, imposing overwhelming problems for the ecosystem. The impact of MPs on life and environmental cycles has already reached a point of no return; yet global awareness of this issue and regulations regarding MP exposure could change this situation in favor of human health. Detection and separation methods for different MPs need to be deployed to achieve the goal of reversing the effect of MPs. Microfluidics is a well-established technology that enables to manipulate samples in microliter volumes in an unprecedented manner. Owing to its low cost, ease of operation, and high efficiency, microfluidics holds immense potential to tackle unmet challenges in MP. In this review, conventional MP detection and separation technologies are comprehensively reviewed, along with state-of-the-art examples of microfluidic platforms. In addition, we herein denote an insight into future directions for microfluidics and how this technology would provide a more efficient solution to potentially eradicate MP pollution.
Collapse
|
9
|
Microplastics toxicity, detection, and removal from water/wastewater. MARINE POLLUTION BULLETIN 2023; 187:114546. [PMID: 36640497 DOI: 10.1016/j.marpolbul.2022.114546] [Citation(s) in RCA: 7] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2022] [Revised: 12/24/2022] [Accepted: 12/27/2022] [Indexed: 06/17/2023]
Abstract
The world has witnessed massive and preeminent microplastics (MPs) pollution in water bodies due to the inevitable continuous production of plastics for various advantageous chemical and mechanical features. Plastic pollution, particularly contamination by MPs (plastic particles having a diameter lesser than 5 mm), has been a rising environmental concern in recent years due to the inappropriate disposal of plastic trash. This study presents the recent advancements in different technologies for MPs removal in order to gain proper insight into their strengths and weaknesses, thereby orchestrating the preparation for innovation in the field. The production, origin, and global complexity of MPs were discussed. This study also reveals MPs' mode of transportation, its feedstock polymers, toxicities, detection techniques, and the conventional removal strategies of MPs from contaminated systems. Modification of conventional methods vis-à-vis new materials/techniques and other emerging technologies, such as magnetic extraction and sol-gel technique with detailed mechanistic information for the removal of MPs are presented in this study. Conclusively, some future research outlooks for advancing the MPs removal technologies/materials for practical realization are highlighted.
Collapse
|
10
|
Occurrence, analysis of microplastics in sewage sludge and their fate during composting: A literature review. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 317:115364. [PMID: 35617865 DOI: 10.1016/j.jenvman.2022.115364] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2021] [Revised: 05/07/2022] [Accepted: 05/17/2022] [Indexed: 06/15/2023]
Abstract
Microplastics (MP) are ubiquitous contaminants and their presence in sewage sludge has recently received attention as they may enter agro-ecosystems if sludge is used as organic soil amendment. Indeed, plastic particles (<5 mm) can be transported from wastewater and sewage sludge to the soil environment either directly within the plastic matrix or indirectly as adsorbed substances. In this paper, articles from 18 countries reporting the MP quantity and their characteristics in sewage sludge from wastewater treatment plants were reviewed and the MP concentration size and type were compared. The data show that MP abundance in sewage sludge ranged globally from 7.91 to 495 × 103 particles kg-1 with highest abundance of fiber shape and MP size of less than 500 μm. In this review, we summarized and discussed the methods most frequently used for extraction and characterization of MP in sewage sludge including organic matter removal, MP extraction; physical and morphological MP characterization and its chemical characterization for polymer identification. We also described the major factors potentially controlling the fate of MP during disposal strategies with particular focus on composting. We show that physical and microbiological factors are important for MP degradation during composting and suggest two remediation practices: (i) inoculation of the initial sludge with microbial plastic decomposers to remove MP from contaminated sewage sludge, and (ii) development of high temperature composting processes.
Collapse
|
11
|
Polyolefin Innovations toward Circularity and Sustainable Alternatives. Macromol Rapid Commun 2022; 43:e2200492. [PMID: 35908163 DOI: 10.1002/marc.202200492] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2022] [Revised: 07/02/2022] [Indexed: 11/10/2022]
Abstract
The unprecedented growth and socioeconomic impacts of polyolefins clearly outline a major success story in the world of polymer science. Polyolefins revolutionizes industries such as health care, construction, and food packaging. Despite the benefits of polyolefins, there is a rising concern for the environment due to high production volume (i.e., fossil fuel consumption), often short usage time, and problems related to waste management and accumulation in the natural environment. Creating a circular economy for polyolefins through effective recycling technologies has the potential to decrease the environmental impact of these materials. This perspective discusses polyolefins and their impact, existing and emerging recycling/upcycling solutions, and recycle-by-design alternatives that are challenging the status quo.
Collapse
|
12
|
Human health concerns regarding microplastics in the aquatic environment - From marine to food systems. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 823:153730. [PMID: 35143789 DOI: 10.1016/j.scitotenv.2022.153730] [Citation(s) in RCA: 126] [Impact Index Per Article: 63.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/09/2021] [Revised: 01/28/2022] [Accepted: 02/03/2022] [Indexed: 06/14/2023]
Abstract
Marine plastic waste pollution is one of the most urgent global marine environmental problems worldwide. It has attracted worldwide attention from governments, the public, the scientific community, media and non-governmental organizations and has become a hot issue in current marine ecology and environmental research. This research aimed to conduct a traditional review of the current state of the art regarding microplastics (MPs) definition and characterisation, including an assessment of MPs detected in marine and food systems. The review revealed that plastic waste is not biodegraded and can only be broken down, predominantly by physical processes, into small particles of micron to nanometre size. Particles (<150 μm) can be ingested by living organisms, migrate through the intestinal wall and reach lymph nodes and other body organs. The primary pathway of human exposure to MPs has been identified as gastrointestinal ingestion (mainly seafood for the general population), pulmonary inhalation, and dermal infiltration. MPs may pollute drinking water, accumulate in the food chain, and release toxic chemicals that may cause disease, including certain cancers. Micro/nano-plastics may pose acute toxicity, (sub) chronic toxicity, carcinogenicity, genotoxicity, and developmental toxicity. In addition, nanoplastics (NPs) may pose chronic toxicity (cardiovascular toxicity, hepatotoxicity, and neurotoxicity). The toxicity of MPs/NPs primarily depends on the particle size distribution and monomeric composition/characteristics of polymers. Polyurethane (PUR), Polyacrylonitrile (PAN), Polyvinyl chloride (PVC), Epoxy resin, and Acrylonitrile-butadiene-styrene (ABS) are categorised as the most toxic polymers based on monomer toxicity. MP detection methods include combinations of spectroscopic analysis (RS and FTIR) and chromatography (TED-GC/MS). MP/NP toxicological properties and general quantitative and qualitative analysis methods used in MPs Risk Assessment (RA) are summarised. A robust dose-response model for MPs/NPs requires further investigation. This study lays the foundation for the evaluation of MP/NP risk assessment in the marine ecosystem and potential implications for human health.
Collapse
|
13
|
The development and application of advanced analytical methods in microplastics contamination detection: A critical review. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 818:151851. [PMID: 34822881 DOI: 10.1016/j.scitotenv.2021.151851] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2021] [Revised: 11/17/2021] [Accepted: 11/17/2021] [Indexed: 06/13/2023]
Abstract
Microplastics have gradually become emerging environmental contaminants for their extensive distribution, small particle size, and harmful effects on organisms. Therefore, finding accurate, efficient, and rapid analytical methods for detecting microplastics pollution has become an urgent problem. We reviewed the derivation, transport, and classification of microplastics and then highlighted the harmfulness of microplastics which would bring microplastics pollution to the environment and potential damage to organisms. Further, various analytical methods were classified into the thermal analytical method, spectral analytical approach, and other analytical methods based on detection principles. In addition, the application of each analytical method in sea and soil was concluded in detail, and the promising development prospect of each analytical method was discussed. In the end, the chemical analytical method was proposed to explore further in the direction of no sample preparation, nondestructive analysis, low detection limit and it is crucial to establish a unified detection and identification method for microplastics in different environments.
Collapse
|
14
|
A Comparison of Different Approaches for Characterizing Microplastics in Selected Personal Care Products. ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY 2022; 41:880-887. [PMID: 33818803 DOI: 10.1002/etc.5057] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2020] [Revised: 07/27/2020] [Accepted: 03/28/2021] [Indexed: 06/12/2023]
Abstract
Any uncertainty in determining numbers of microplastics in the environment may be a barrier to assessing their impact and may stem from various aspects of methodologies used to quantify them. We undertook a comparison of approaches to quantify and characterize microplastics in 4 personal care products. The aim was not only to determine how many particles were present but to assess any differences due to the methods used. Counting of extracted microplastics was undertaken using particle size analysis, light microscopy, and imaging flow cytometry. Micro-Fourier transform infrared spectroscopy (µ-FTIR) was used to characterize the particles in each product. The mean size distribution of microplastics differed depending on the method employed, and it was apparent that imaging flow cytometry was affected by high background noise that may require staining of plastics to overcome. The application of µ-FTIR confirmed polyethylene as the microplastic in each product. Methodological challenges encountered in the study and the literature have highlighted the need for standardization of methods for determining microplastics. Environ Toxicol Chem 2022;41:880-887. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
Collapse
|
15
|
Toward a Framework for Environmental Fate and Exposure Assessment of Polymers. ENVIRONMENTAL TOXICOLOGY AND CHEMISTRY 2022; 41:515-540. [PMID: 34913523 DOI: 10.1002/etc.5272] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/16/2021] [Revised: 09/08/2021] [Accepted: 12/11/2021] [Indexed: 06/14/2023]
Abstract
Development of risk-assessment methodologies for polymers is an emerging regulatory priority to prevent negative environmental impacts; however, the diversity and complexity of polymers require adaptation of existing environmental risk-assessment approaches. The present review discusses the challenges and opportunities for the fate and exposure assessment of polymers in the context of regulatory environmental risk assessment of chemicals. The review discusses the applicability and adequacy for polymers of existing fate parameters used for nonpolymeric compounds and proposes additional parameters that could inform the fate of polymers. The significance of these parameters in various stages of an exposure-assessment framework is highlighted, with classification of polymers as solid or dissolved being key for identification of those parameters most relevant to environmental fate. Considerations to address the key limitations and knowledge gaps are then identified and discussed, specifically the complexity of polymer identification, with the need for characterization of the most significant parameters for polymer grouping and prioritization; the complexity of polymer degradation in the environment, with the need to incorporate the fate and hazards of degradation products into risk assessment; the requirement for development and standardization of analytical methods for characterization of polymer fate properties and degradation products; and the need to develop exposure modeling approaches for polymers. Environ Toxicol Chem 2022;41:515-540. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.
Collapse
|
16
|
Emerging investigator series: microplastic sources, fate, toxicity, detection, and interactions with micropollutants in aquatic ecosystems - a review of reviews. ENVIRONMENTAL SCIENCE. PROCESSES & IMPACTS 2022; 24:172-195. [PMID: 35081190 PMCID: PMC9723983 DOI: 10.1039/d1em00443c] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Hundreds of review studies have been published focusing on microplastics (MPs) and their environmental impacts. With the microbiota colonization of MPs being firmly established, MPs became an important carrier for contaminants to step inside the food web all the way up to humans. Thus, the continuous feed of MPs into the ecosystem has sparked a multitude of scientific concerns about their toxicity, characterization, and interactions with microorganisms and other contaminants. The reports of common subthemes have agreed about many findings and research gaps but also showed contradictions about others. To unravel these equivocal conflicts, we herein compile all the major findings and analyze the paramount discrepancies among these review papers. Furthermore, we systematically reviewed all the highlights, research gaps, concerns, and future needs. The covered focus areas of MPs' literature include the sources, occurrence, fate, existence, and removal in wastewater treatment plants (WWTPs), toxicity, interaction with microbiota, sampling, characterization, data quality, and interaction with other co-contaminants. This study reveals that many mechanisms of MPs' behavior in aquatic environments like degradation and interaction with microbiota are yet to be comprehended. Furthermore, we emphasize the critical need to standardize methods and parameters for MP characterization to improve the comparability and reproducibility of the incoming research.
Collapse
|
17
|
A review of microplastic pollution in seawater, sediments and organisms of the Chinese coastal and marginal seas. CHEMOSPHERE 2022; 286:131677. [PMID: 34346336 DOI: 10.1016/j.chemosphere.2021.131677] [Citation(s) in RCA: 57] [Impact Index Per Article: 28.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/13/2021] [Revised: 07/11/2021] [Accepted: 07/23/2021] [Indexed: 06/13/2023]
Abstract
China is considered to account for nearly a third of all plastic waste discharging from land to the ocean. To overall assess microplastic pollution status in Chinese coastal and marginal seas, this study summarized the abundance and characteristics of microplastics in the seawater, sediments and marine organisms. The results showed that the abundance of microplastics in the seawater of four major seas of China was 0.13-545 items/m³, and microplastic abundance in the sediments from the estuaries was 20-7900 items/kg, which are at middle level or even lower than those detected in other countries. By contrast, severe microplastic pollution was recorded in the estuaries, suggesting that plastic waste and microplastic interception measures should be conducted on the rivers to prevent the input of microplastics. In addition, microplastics were widely detected in marine fishes, mollusks, zooplankton, mammals and birds, which highlights the potential impacts of microplastic pollution on the whole marine ecosystem. Compared to the dry season, higher microplastic abundance was found in the rainy season, revealing that plastic waste recycling should be strengthened before the onset of rainy season. We suggest that all countries respond actively to the ubiquitous microplastic pollution through practical policies and measures to prevent microplastics from further damaging the marine ecosystem.
Collapse
|
18
|
Distribution and characterization of microplastics in marine sediments from the Montenegrin coast. JOURNAL OF SOILS AND SEDIMENTS 2022; 22:2958-2967. [PMID: 35221794 PMCID: PMC8857885 DOI: 10.1007/s11368-022-03166-3] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/29/2021] [Accepted: 02/11/2022] [Indexed: 05/07/2023]
Abstract
PURPOSE Plastic pollution in the world has led to an abundance of microplastics (MPs) and has been identified as a potential factor that can lead to serious environmental problems, especially in oceans and seas. Information on the current status of MPs pollution along the Montenegrin coast is insufficiently investigated. This study monitors the abundance, distribution, and sources of MPs, and identifies present polymers in the surface sediment of the Montenegrin coast, as well as comparison with previous research. MATERIALS AND METHODS Ten sampling sites along the Montenegrin coast were selected to collect surface sediment samples. The upper layer of sediment (0-5 cm) was collected by a Petite ponar grab. The samples were dried, and density separation was performed using a NaCl solution. The abundance and morphological characteristics of MPs were determined using an optical microscope (DP-Soft software), while FT-IR analysis was done to identify the polymer type. RESULTS AND DISCUSSION Microplastics were identified in all sediment samples with an average abundance of 307 ± 133 (SD) MPs/kg in dry sediment. The highest abundance of MPs was found in locations in the vicinity of highly populated areas, near wastewater discharges, and areas with high fishing and tourist activities. The most dominant shape types of MPs in all samples were filaments and fragments. The most common colors of MPs were blue and red, while the dominant MPs sizes were 0.1-0.5 mm and 0.5-1.0 mm. Of the eight identified polymers, PP, PE, and PET were the most common. CONCLUSION This study reveals MPs characteristics (abundance, distribution, shape type, colors, size, polymers type) in surface sediment along the Montenegrin coast, as well as the most significant sources of MPs pollution, and provides important data for further research on MPs to identify the effects of MPs pollution on the quality, health, and functionality of the marine environment.
Collapse
|
19
|
How fast, how far: Diversification and adoption of novel methods in aquatic microplastic monitoring. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2021; 291:118174. [PMID: 34583265 DOI: 10.1016/j.envpol.2021.118174] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/06/2021] [Revised: 09/10/2021] [Accepted: 09/11/2021] [Indexed: 06/13/2023]
Abstract
Since 2004, there has been a marked diversification in the methods used to determine aquatic microplastic (MP) concentrations. Despite calls for a unified approach to MP sampling, the proliferation of new methods has accelerated in recent years. Both minor method adaptations and entirely novel approaches have been introduced to overcome barriers to reliable MP sampling, extraction and quantification, resulting in a variety of complimentary but also competing approaches. However, there is little clarity regarding the extent to which new methods are acknowledged and adopted, or of the apparent drivers of, as well as barriers to, said adoption. To explore these issues, the rate of method diversification was examined in a systematic review. The rate and degree of diversification were determined by scoring each method by its "degree of novelty": highly novel methods, secondary adaptations of existing methods and smaller, tertiary adaptations of existing methods. This analysis revealed that the rate of method diversification has been greatest since 2011. Our results indicate limited use of these novel methods and adaptations in the subsequent literature, with many researchers falling back on methods that are well established in the existing literature. Importantly, there is little consistency in the units used when reporting MP concentrations. However, these differences are seldom driven by method selection and are rather the result of discrepancies between researchers. Thus, in understanding the requirements of comparability and consistent reporting for monitoring purposes, we can apply a diverse approach to sampling whilst maintaining the applicability and usefulness of the resulting data.
Collapse
|
20
|
Microplastics in the environment: Sampling, pretreatment, analysis and occurrence based on current and newly-exploited chromatographic approaches. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 794:148725. [PMID: 34323760 DOI: 10.1016/j.scitotenv.2021.148725] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/09/2021] [Revised: 06/23/2021] [Accepted: 06/24/2021] [Indexed: 06/13/2023]
Abstract
The omnipresent character of microplastics (MPs) in environmental matrices, organisms and products has recently posed the need of their qualitative as well as quantitative analysis imperative, in order to provide data about their abundance and specification of polymer types in several substrates. In this framework, current and emerging approaches based on the chromatographic separation are of increased relevance in the field of MPs analysis and possess a large number of merits, since most of them are applicable in various complex matrices, sensitive and ideal for the detection of small-sized particles, whereas the common absence of any special pre-treatment step before analysis should also be highlighted. Αnalytical pyrolysis coupled with gas chromatography mass spectrometry (GC-MS) has recently gained ground as a powerful means to deliver information on MPs composition and degradation after their release into environment. Several instrumentations and trends in the area of analytical pyrolysis are thoroughly described within this review, while newly-exploited chromatographic methods in the field of MPs analysis, including Liquid Chromatography (LC) and Gel Permeation Chromatography (GPC) in this line are also investigated. The present review fills the gap of standardization concerning sampling, pre-treatment and chromatographic approaches and gathers all the available methodologies applied inside this area in accordance with the studied substrate, with the most examined environmental matrices being the solid one. After investigating the various works, some development options arise and it appears that chromatographic approaches should focus on improved extraction processes in terms of MPs isolation, since it is a crucial part in plastic items monitoring and is commonly depended on the polymer type and matrix. Special attention is given on the potential of chromatographic techniques for microplastics identification as well as quantification by confirming the current research status and knowledge gaps and highlighting some of the recent trends in this field.
Collapse
|
21
|
A proposed nomenclature for microplastic contaminants. MARINE POLLUTION BULLETIN 2021; 172:112960. [PMID: 34706478 DOI: 10.1016/j.marpolbul.2021.112960] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2021] [Revised: 09/08/2021] [Accepted: 09/10/2021] [Indexed: 06/13/2023]
Abstract
Microplastics are emerging contaminants with a wide environmental distribution and potential to elicit adverse impacts on organisms. Despite this lack of consistency among reports, data obtained from different investigations are often compared, resulting in the potential for misrepresentation of global microplastic contamination. Major interlaboratory variability in quantification of microplastic levels stem from size-related differences in sampling and analysis with different density solutions to separate microplastics. Herein, we propose a nomenclature that provides key information relating to the microplastics abundance in samples. That is, the proposed nomenclature, MPsca, b, informs on mesh or filter size used in sampling, the density of flotation solution used to separate the microplastics, and the detection limit during the analysis progress of microplastics. This proposed nomenclature would facilitate comparisons among studies to avoid over- or under-estimation of global microplastic levels. Moreover, it would also facilitate the interpretation of meta-data in future assessments.
Collapse
|
22
|
Determination of viscosity average molar masses of polyethylene in a wide range using rheological measurements with a harmless solvent. INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION 2021. [DOI: 10.1080/1023666x.2021.1951073] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
23
|
Treatment processes for microplastics and nanoplastics in waters: State-of-the-art review. MARINE POLLUTION BULLETIN 2021; 168:112374. [PMID: 33895392 DOI: 10.1016/j.marpolbul.2021.112374] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/04/2021] [Revised: 03/17/2021] [Accepted: 04/09/2021] [Indexed: 05/06/2023]
Abstract
In this work, established treatment processes for microplastics (MPs) and nanoplastics (NPs) in water as well as developed analytical techniques for evaluation of the operation of these processes were reviewed. In this regard, the strengths and limitations of different qualitative and quantitative techniques for the analysis of MPs and NPs in water treatment processes were first discussed. Afterward, the MPs and NPs treatment processes were categorized into the separation and degradation processes and the challenges and opportunities in their performance were analyzed. The evaluation of these processes revealed that the MPs or NPs removal efficiency of the separation and degradation processes could reach up to 99% and 90%, respectively. It can be concluded from this work that the combination of separation and degradation processes could be a promising approach to mineralize MPs and NPs in water with high efficiency.
Collapse
|
24
|
Microplastic pollution in African countries' water systems: a review on findings, applied methods, characteristics, impacts, and managements. SN APPLIED SCIENCES 2021; 3:629. [PMID: 34002166 PMCID: PMC8116826 DOI: 10.1007/s42452-021-04619-z] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/19/2021] [Accepted: 04/29/2021] [Indexed: 12/30/2022] Open
Abstract
ABSTRACT Owed to their simplicity, flexibility, lightweight, and low cost, plastics have become highly demanded in Africa as well as worldwide. However, the management of plastic wastes, particularly in African countries, is inadequate and most of the plastic debris is gatewayed into the water bodies. Nowadays, environmentalists, organizations, and governments are aware of microplastic pollution in the marine and terrestrial environment. Thus, addressing a compressive literature review in one referenced paper, as they draw up the articles, is essential to propose new research directions, to synthesize the existing theories among the existing studies. The abundance of microplastics is variable depending on the sampling and identification techniques. In this review, the available publications on microplastic pollution in African countries' water systems were retrieved. Investigations found that microplastic pollution levels in the studied water bodies were reported in high concentrations. It was observed that different sampling and analytical methods were applied for the detection of microplastics, and suggestions were raised at it may affect the reliability of the results. Most of the detected and quantified microplastics were confirmed as they are from secondary sources. Most of the microplastic pollution research was conducted dominantly in South Africa, and secondly Nigeria, although other countries should also start conducting in their water systems. Surface water and sediment samples were dominantly carried out, but are limited with biota samples; hence, the risk assessment of microplastics is not yet determined. Some of the African countries have regulations on the prevention of macroplastic wastes, but the implementations are unsuccessful and most have not yet been established resulting in a threat of microplastics pollution. Thus, the research priorities on microplastic detection should be identified, and the African countries' governments should be more proactive in eradicating macroplastic, which ends up as microplastics, pollutions in the water environments. GRAPHIC ABSTRACT ARTICLE HIGHLIGHTS Researches on microplastic pollution in African countries water system is limited .A high microplastics abundance is found in African countries water system.Sampling methods and used analytical techniques for microplastic detection were included.Harmonized standard methods for microplastic pollution research should be established.Combined analytical tools at once should be adopted to detect reliable microplastics.
Collapse
|
25
|
Detection and removal of microplastics in wastewater: evolution and impact. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2021; 28:16925-16947. [PMID: 33634402 PMCID: PMC7906573 DOI: 10.1007/s11356-021-12943-5] [Citation(s) in RCA: 65] [Impact Index Per Article: 21.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/18/2020] [Accepted: 02/09/2021] [Indexed: 05/05/2023]
Abstract
The pervasiveness of microplastics in aquatic ecosystems has become a major environmental issue in recent years. The gradual dumping of plastic wastes, inadequate standard detection methods with specific removal techniques, and slow disposal rate of microplastics make it ubiquitous in the environment. Evidence shows that microplastics act as a potential vector by adsorbing different heavy metals, pathogens, and other chemical additives widely used in different raw plastic production. Microplastics are ingested by aquatic creatures such as fish and different crustaceans, and finally, people ingest them at the tertiary level of the food chain. This phenomenon is responsible for blocking the digestion tracts, disturbing the digestive behavior, finally decreasing the reproductive growth of entire living organisms. Because of these consequences, microplastics have become an increasing concern as a newly emerging potential threat, and therefore, the control of microplastics in aquatic media is required. This paper provides a critical analysis of existing and newly developed methods for detecting and separating microplastics from discharged wastewater, which are the ultimate challenges in the microplastic treatment systems. A critical study on the effect of microplastics on aquatic organisms and human health is also discussed. Thus, this analysis provides a complete understanding of entire strategies for detecting and removing microplastics and their associated issues to ensure a waste discharge standard to minimize the ultimate potential impact in aquatic environments.
Collapse
|
26
|
Microplastics in the Aquatic Environment: Occurrence, Persistence, Analysis, and Human Exposure. WATER 2021. [DOI: 10.3390/w13070973] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Microplastics (MP) have recently been considered as emerging contaminants in the water environment. In the last number of years, the number of studies on MP has grown quickly due to the increasing consciousness of the potential risks for human health related to MP exposure. The present review article discusses scientific literature regarding MP occurrence and accumulation on the aquatic compartment (river, lake, wastewater, seafood), the analytical methods used to assess their concentration, their fate and transport to humans, and delineates the urgent areas for future research. To better analogize literature data regarding MP occurrence in the aquatic compartment we subdivided papers based on sampling, analytical methods, and concentration units with the aim to help the reader identify the similarities and differences of the considered research papers, thus making the comparison of literature data easier and the individuation of the most relevant articles for the reader’s interests faster. Furthermore, we argued about several ways for MP transport to humans, highlighting some gaps in analytical methods based on the reviewed publications. We suggest improving studies on developing standardized protocols to collect, process, and analyze samples.
Collapse
|
27
|
Environmental fate and impacts of microplastics in aquatic ecosystems: a review. RSC Adv 2021; 11:15762-15784. [PMID: 35481192 PMCID: PMC9031200 DOI: 10.1039/d1ra00880c] [Citation(s) in RCA: 47] [Impact Index Per Article: 15.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2021] [Accepted: 04/18/2021] [Indexed: 12/12/2022] Open
Abstract
Wide usage of plastic products leads to the global occurrence of microplastics (MPs) in the aquatic environment. Due to the small size, they can be bio-ingested, which may cause certain health effects. The present review starts with summarizing the main sources of various types of MPs and their occurrences in the aquatic environment, as well as their transportation and degradation pathways. The analysis of migration of MPs in water environments shows that the ultimate fate of most MPs in water environments is cracked into small fragments and sinking into the bottom of the ocean. The advantages and disadvantages of existing methods for detection and analysis of MPs are summarized. In addition, based on recent researches, the present review discusses MPs as carriers of organic pollutants and microorganisms, and explores the specific effects of MPs on aquatic organisms in the case of single and combined pollutants. Finally, by analysing the causes and influencing factors of their trophic transfer, the impact of MPs on high-level trophic organisms is explored. The sources, fate and impacts of microplastics in aquatic ecosystems.![]()
Collapse
|
28
|
A critical review of the overlooked challenge of determining micro-bioplastics in soil. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 745:140975. [PMID: 32712500 DOI: 10.1016/j.scitotenv.2020.140975] [Citation(s) in RCA: 36] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/14/2020] [Revised: 07/12/2020] [Accepted: 07/12/2020] [Indexed: 06/11/2023]
Abstract
Currently, non-biodegradable oil-based plastics are gradually being replaced by bio-based biodegradable plastics to prevent the formation of microplastics. For biodegradable materials to decompose completely, however, they require specific conditions that are rarely met in ecosystems. Paradoxically, this may lead to the fast production of microplastics from biodegradable materials, i.e. micro-bioplastics. Until recently, the scientific focus has been solely on the estimation of conventional microplastics. As a result, there is a lack of analytical methods for determining the amount of micro-bioplastics in soil. In this review, we address this problem by summarising sample pre-treatments and analytical techniques suitable for the determination of conventional microplastics, which serve as inspiration for the determination of micro-bioplastics from polyhydroxybutyrates, polylactic acid and polybutylene adipate terephthalate in soil. The analytical techniques include both pyrolysis-based techniques, i.e. thermoanalytical and non-thermoanalytical approaches including sample pre-separation and respective detection limits. We conclude that due to the incomplete knowledge of the production rate of micro-bioplastics, fate, sorption properties and toxicity, it is necessary to develop and validate a rapid and suitable method for their determination. Indeed, the use of thermoanalytical approaches seems to be the most promising strategy. Furthermore, we suggest how the development and analysis of micro-bioplastics should be addressed in future research.
Collapse
|
29
|
Microplastics in fish meal: Contamination level analyzed by polymer type, including polyester (PET), polyolefins, and polystyrene. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2020; 273:115792. [PMID: 33493766 DOI: 10.1016/j.envpol.2020.115792] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/14/2020] [Revised: 09/30/2020] [Accepted: 10/06/2020] [Indexed: 06/12/2023]
Abstract
Fish meal (FM) is an industrial product, mainly obtained from whole wild-caught fish, that is used as a high protein feedstuff component in aquaculture and intensive animal farming. Contamination of FM by microplastics (MPs), the synthetic polymer particles known to be nearly ubiquitous in the marine environment, is a likely consequence of their ingestion by zooplankton and other small marine animals that through the food chain end up in the fish commercialized not only for direct human consumption but also for the industrial production of FM. Unfortunately, analytical tools for quantifying contamination of FM by synthetic polymers are not available. A newly developed procedure described here allows quantification of the total amounts of polyolefins (including ethene and propene homo- and copolymers), polystyrene (PS), and poly(ethylene terephthalate) (PET), respectively, in FM. The multi-step procedure involves a sequence of solvent extractions, hydrolytic treatments to remove the biogenic matrix mainly consisting of proteins and some lipids, and selective depolymerization for PET. The gravimetric and SEC-UV techniques employed for the quantification of polyolefins and PS, respectively, only allowed to estimate their concentration in FM at around or below 100 mg/kg each, a more accurate quantification being prevented by the interference from the organic matrix and, in the case of polyolefins, by the limited sensitivity of the quantification by gravimetry. On the other hand, the contamination by PET MPs could accurately be quantified at 12.9 mg/kg based on the dry FM mass. Ways to overcome the sensitivity limitations for PS and polyolefins by using e.g. pyrolysis-GC/MS are highlighted.
Collapse
|
30
|
Microplastics as pollutants in agricultural soils. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2020; 265:114980. [PMID: 32544663 DOI: 10.1016/j.envpol.2020.114980] [Citation(s) in RCA: 198] [Impact Index Per Article: 49.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/17/2020] [Revised: 05/23/2020] [Accepted: 06/04/2020] [Indexed: 05/18/2023]
Abstract
Microplastics (MPs) as emerging persistent pollutants have been a growing global concern. Although MPs are extensively studied in aquatic systems, their presence and fate in agricultural systems are not fully understood. In the agricultural soils, major causes of MPs pollution include application of biosolids and compost, wastewater irrigation, mulching film, polymer-based fertilizers and pesticides, and atmospheric deposition. The fate and dispersion of MPs in the soil environment are mainly associated with the soil characteristics, cultivation practices, and diversity of soil biota. Although there is emerging pollution of MPs in the soil environment, no standardized detection and quantification techniques are available. This study comprehensively reviews the sources, fate, and dispersion of MPs in the soil environment, discusses the interactions and effects of MPs on soil biota, and highlights the recent advancements in detection and quantification methods of MPs. The prospects for future research include biomagnification potency, cytotoxic effects on human/animals, nonlinear behavior in the soil environment, standardized analytical methods, best management practices, and global policies in the agricultural industry for the sake of sustainable development.
Collapse
|
31
|
Microplastics in waters and soils: Occurrence, analytical methods and ecotoxicological effects. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2020; 202:110910. [PMID: 32800245 PMCID: PMC7324347 DOI: 10.1016/j.ecoenv.2020.110910] [Citation(s) in RCA: 50] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/29/2020] [Revised: 06/15/2020] [Accepted: 06/16/2020] [Indexed: 05/07/2023]
Abstract
Microplastics (MPs) are ubiquitous in the environment and more abundant in the marine environment. Consequently, increasing focus has been put on MPs in oceans and seas, while little importance has been attached to their presence in freshwaters and soils. Therefore, this paper aimed to provide a comprehensive review of the occurrence, analysis and ecotoxicology of MPs. The abundance and distribution of MPs in several typical freshwater systems of China were summarized. It suggested that the surface water of Poyang Lake contained the highest concentration of 34 items/L MPs among all the 8 freshwater systems, and the content of MPs in sediments were higher than that of the surface water. Net-based zooplankton sampling methods are the most frequently utilized sampling methods for MPs, and density separation, elutriation and digestion are three major pretreatment methods. Fourier transform infrared spectroscopy, Raman spectroscopy and pyrolysis-gas chromatography coupled to mass spectrometry are often used to identify the polymer types of MPs. Besides, MPs might damage the digestive tract of various organisms and negatively inhibit their growth, feeding and reproduction. The ways of human exposure to MPs are by ingestion, inhalation and dermal exposure, digestive and respiratory system might be adversely influenced. However, potential health risks of MPs to humans are remained insufficiently researched. Overall, by showing the presence of MPs in freshwaters and soils as well as possible ecotoxicological effects on the environment and humans, this paper provided a framework for future research in this field.
Collapse
|
32
|
Comparing microplastics contaminants in (dry and raining) seasons for Ox- Bow Lake in Yenagoa, Nigeria. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2020; 198:110656. [PMID: 32334203 DOI: 10.1016/j.ecoenv.2020.110656] [Citation(s) in RCA: 35] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/27/2020] [Revised: 04/02/2020] [Accepted: 04/17/2020] [Indexed: 06/11/2023]
Abstract
The occurrence and distribution of microplastics (MPs) for two seasons (dry and raining) were investigated based on 10 sections of OX- Bow Lake Yenagoa, Nigeria for surface water and sediments. MPs were abundant in colour and dominated by fibrous items. For dry season, Polyethylene terephthalate (PET) and Plasticised polyvinyl chloride (Plasticised PVC) were the predominant MPs; they both account for 72.63% and 10.9% of surface water and sediment samples. The raining season accounted for Plasticised (PVC) 81.5% and low-density polyethylene 4.2% respectively. The raining and dry seasons MPs were characterise by μ-FTIR. Beads and pellets were most common MP shapes in both water and sediment samples for the two seasons. The results showed that there is high presence of MPs in OX -Bow Lake.
Collapse
|
33
|
The removal of microplastics in the wastewater treatment process and their potential impact on anaerobic digestion due to pollutants association. CHEMOSPHERE 2020; 251:126360. [PMID: 32155494 DOI: 10.1016/j.chemosphere.2020.126360] [Citation(s) in RCA: 83] [Impact Index Per Article: 20.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/18/2019] [Revised: 01/28/2020] [Accepted: 02/26/2020] [Indexed: 06/10/2023]
Abstract
Microplastics are abundant in municipal wastewater which is mainly from personal care products and laundry. In recent years, great attention has been given to microplastics removal in wastewater treatment. In this article, the study focusing on microplastics in wastewater has been evaluated with VOSviewer. It was found that the major interest was in identification, quantification and pollution of the microplastics in the wastewater, and their transportation and final destination during wastewater treatment processes. The major microplastics and their shapes in wastewater were reviewed. Our evaluation results were consistent with other reported that fibers and fragment were the majority in terms of shape and polyethylene terephthalare (PET), polyethylene (PE), polypropylene (PP), and polystyrene (PS) are the most presented microplastics in wastewater. During wastewater treatment, the removal route of microplastics from wastewater includes settling, adsorption, entrapment, interception, etc. It confirms that microplastics are just simply transferred from wastewater to sludge. It could then bring problems to anaerobic digestion as microplastics are great vector for toxic substances such as antibiotics and persistence organic pollutants. The key to determine the microplastics effect on anaerobic digestion is the desorption behavior of the toxic substances such as antibiotics, persistent organic pollutants and heavy metals from microplastics in digestion condition. Toxic compounds which are commonly presenting in sludge have shown the tendency to release from microplastics. It indicates that microplastics in sludge have great possibility to impact on methane production.
Collapse
|
34
|
Finding Microplastics in Soils: A Review of Analytical Methods. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2020; 54:2078-2090. [PMID: 31999440 DOI: 10.1021/acs.est.9b04618] [Citation(s) in RCA: 142] [Impact Index Per Article: 35.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
Research on microplastics in soils is still uncommon, and the existing publications are often incomparable due to the use of different sampling, processing, and analytical methods. Given the complex nature of soils, a suitable and efficient method for standardized microplastic analysis in the soil matrix has yet to be found. This paper proposes a critical review on the different published methods for sampling, extraction, purification, and identification/quantification of microplastics in complex environmental matrices, with the main focus on their applicability for soil samples. While large microplastic particles can be manually sorted out and verified with chemical analysis, sample preparation for smaller microplastic analysis is usually more difficult. Of the analytical approaches proposed in the literature, some are established, whereas others are a proof of principle and have not yet been applied to environmental samples. For the sake of development, all approaches are discussed and assessed for their potential applicability for soil samples. So far, none of the published methods seems ideally suitable for the analysis of smaller microplastics in soil samples, but slight modifications and combinations of methods may prove promising and need to be explored.
Collapse
|
35
|
Release of hazardous nanoplastic contaminants due to microplastics fragmentation under shear stress forces. JOURNAL OF HAZARDOUS MATERIALS 2020; 384:121393. [PMID: 31740306 DOI: 10.1016/j.jhazmat.2019.121393] [Citation(s) in RCA: 154] [Impact Index Per Article: 38.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/07/2019] [Revised: 09/27/2019] [Accepted: 10/03/2019] [Indexed: 05/22/2023]
Abstract
The presence of nanoplastics in water has become a major environmental concern in the last decade however the knowledge on the origin and formation of these emerging contaminants is lacking due to analytical challenges in detection and quantification techniques. The release of nanoplastics due to the fragmentation of microplastics extracted from a facial scrub and the resulting toxicity on aquatic species are reported here for the first time. The daily use of 4 g of facial scrub could release up to 1011 microplastics of 400 nm in size per litre of wastewater from household drains. Turbulences created by mixing or pumping induced the fragmentation of microplastics into nanoplastics smaller than 10 nm via a crack propagation and failure mechanism, increasing the number of particles in water by one order of magnitude. Compared to microplastics at a fixed concentration number of 6.8 × 108 part./mL, the generated nanoplastics initiated the death of 54% more cells in zebrafish by passive ingestion via skin diffusion which therefore pose a real threat for aquatic living organisms. These results stress the need to reduce the release of nano/microplastics in the aquatic environment to prevent the contamination of all trophic levels.
Collapse
|
36
|
A novel method for purification, quantitative analysis and characterization of microplastic fibers using Micro-FTIR. CHEMOSPHERE 2020; 238:124564. [PMID: 31472348 DOI: 10.1016/j.chemosphere.2019.124564] [Citation(s) in RCA: 63] [Impact Index Per Article: 15.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/10/2019] [Revised: 08/02/2019] [Accepted: 08/09/2019] [Indexed: 06/10/2023]
Abstract
Microplastics pose a worldwide risk for the environment. Microplastic fibers, which are released during the household washing of synthetic fabrics, are a substantial percentage of microplastics in rivers and in oceans. A novel quantification and simultaneous identification of fiber polymers via Micro-FTIR (Fourier Transform Infrared Spectroscopy) was developed. Washing simulations with commercially available household products were performed and effluents were filtered either on GF/F filters (0.7 μm) or on Anodisc filter (0.2 μm), to gather even the smallest fibers. Furthermore, a novel purification procedure of effluents was developed. Subsequently, filters were analyzed also with the scanning electronic microscope (SEM) to confirm the width and length of fibers. This novel method is robust and replicable and it allows better quantification of fibers released and identification of fiber polymers with optimal matches (averagely 80%).
Collapse
|
37
|
Advances and challenges of microplastic pollution in freshwater ecosystems: A UK perspective. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2020; 256:113445. [PMID: 31733965 DOI: 10.1016/j.envpol.2019.113445] [Citation(s) in RCA: 87] [Impact Index Per Article: 21.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/27/2019] [Revised: 09/27/2019] [Accepted: 10/19/2019] [Indexed: 06/10/2023]
Abstract
Microplastics have been increasingly documented in freshwater ecosystems in recent years, and growing concerns have been raised about their potential environmental health risks. To assess the current state of knowledge, with a focus on the UK, a literature review of existing freshwater microplastics studies was conducted. Sampling and analytical methodologies currently used to detect, characterise and quantify microplastics were assessed and microplastic types, sources, occurrence, transport and fate, and microplastic-biota interactions in the UK's freshwater environments were examined. Just 32% of published microplastics studies in the UK have focused on freshwater environments. These papers cover microplastic contamination of sediments, water and biota via a range of methods, rendering comparisons difficult. However, secondary microplastics are the most common type, and there are point (e.g. effluent) and diffuse (non-point, e.g. sludge) sources. Microplastic transport over a range of spatial scales and with different residence times will be influenced by particle characteristics, external forces (e.g. flow regimes), physical site characteristics (e.g. bottom topography), the degree of biofouling, and anthropogenic activity (e.g. dam release), however, there is a lack of data on this. It is predicted that impacts on biota will mirror that of the marine environment. There are many important gaps in current knowledge; field data on the transport of microplastics from diffuse sources are less available, especially in England. We provide recommendations for future research to further our understanding of microplastics in the environment and their impacts on freshwater biota in the UK.
Collapse
|
38
|
Plastic sources: A survey across scientific and grey literature for their inventory and relative contribution to microplastics pollution in natural environments, with an emphasis on surface water. THE SCIENCE OF THE TOTAL ENVIRONMENT 2019; 693:133499. [PMID: 31377368 DOI: 10.1016/j.scitotenv.2019.07.305] [Citation(s) in RCA: 123] [Impact Index Per Article: 24.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/16/2019] [Revised: 07/18/2019] [Accepted: 07/19/2019] [Indexed: 05/23/2023]
Abstract
Plastic debris are at present recognized as an emerging potential threat for natural environments, wildlife and humans. In the past years an increasing attention has been addressed to investigate the presence and concentration of plastic debris in the ecosystems, including surface waters. Scientific literature extensively describes the ingestion by aquatic fauna, the transfer into food webs and the potential action as a vector for toxic compounds or alien microorganisms. Although the scientific community addresses this issue with considerable effort, many questions remain open. In particular, new sources of microplastics have been recently recognized, possibly representing major environmental inputs compared to those previously considered. In addition to the already renowned sources such as the embrittlement of plastic litter and microbeads released from personal care products, microplastic can be released also by washing of synthetic clothes, abrasion of vehicles tyres and from the weathering of different kind of paints. This review tries to exhaustively enumerate all the possible sources of plastic litter that have been identified so far and to report quantitative assessments of their inputs on microplastics pollution to natural environments reported in scientific and grey literature, with an emphasis on surface waters.
Collapse
|
39
|
Occurrence and risk assessment of microplastics from various toothpastes. ENVIRONMENTAL MONITORING AND ASSESSMENT 2019; 191:438. [PMID: 31203457 DOI: 10.1007/s10661-019-7574-1] [Citation(s) in RCA: 25] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2019] [Revised: 05/20/2019] [Accepted: 05/27/2019] [Indexed: 06/09/2023]
Abstract
Microplastics have become a major environmental issue; their release from various products affects the aquatic environment. Personal care products such as toothpastes are recently being considered as a significant source of microplastics released to the aquatic environment. This study aims to assess the presence of microplastics found in toothpastes that are available in the drugstores and markets in Istanbul, Turkey. A total of 20 samples were tested. Following the extraction procedure, obtained particles were quantified and then characterized by microscopic evaluation and surface chemistry analysis. Twenty percent of the samples were found to contain microplastics in the structure of polyethylene at concentrations varying between 0.4 and 1%. In order to evaluate the release to environment, a risk assessment was conducted and yearly microplastic emission caused by toothpaste consumption was calculated based on the results.
Collapse
|
40
|
Microplastics in wastewater treatment plants: Detection, occurrence and removal. WATER RESEARCH 2019; 152:21-37. [PMID: 30660095 DOI: 10.1016/j.watres.2018.12.050] [Citation(s) in RCA: 621] [Impact Index Per Article: 124.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/10/2018] [Revised: 12/10/2018] [Accepted: 12/21/2018] [Indexed: 05/06/2023]
Abstract
Microplastics have aroused increasing concern as they pose threats to aquatic species as well as human beings. They do not only contribute to accumulation of plastics in the environment, but due to absorption they can also contribute to spreading of micropollutants in the environment. Studies indicated that wastewater treatment plants (WWTPs) play an important role in releasing microplastics to the environment. Therefore, effective detection of the microplastics and understanding their occurrence and fate in WWTPs are of great importance towards microplastics control. In this review, the up-to-date status on the detection, occurrence and removal of microplastics in WWTPs are comprehensively reviewed. Specifically, the different techniques used for collecting microplastics from both wastewater and sewage sludge, and their pretreatment and characterization methods are reviewed and analyzed. The key aspects regarding microplastics occurrence in WWTPs, such as concentrations, total discharges, materials, shapes and sizes are summarized and compared. Microplastics removal in different treatment stages and their retention in sewage sludge are explored. The development of potential microplastics-targeted treatment technologies is also presented. Although previous researches in microplastics have undoubtedly improved our level of understanding, it is clear that much remains to be learned about microplastics in WWTPs, as many unanswered questions and thereby concerns still remain; some of these important future research areas are outlined. The key challenges appear to be to harmonize detection methods as well as microplastics mitigation from wastewater and sewage sludge.
Collapse
|
41
|
Emergence of Nanoplastic in the Environment and Possible Impact on Human Health. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2019; 53:1748-1765. [PMID: 30629421 DOI: 10.1021/acs.est.8b05512] [Citation(s) in RCA: 489] [Impact Index Per Article: 97.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
On account of environmental concerns, the fate and adverse effects of plastics have attracted considerable interest in the past few years. Recent studies have indicated the potential for fragmentation of plastic materials into nanoparticles, i.e., "nanoplastics," and their possible accumulation in the environment. Nanoparticles can show markedly different chemical and physical properties than their bulk material form. Therefore possible risks and hazards to the environment need to be considered and addressed. However, the fate and effect of nanoplastics in the (aquatic) environment has so far been little explored. In this review, we aim to provide an overview of the literature on this emerging topic, with an emphasis on the reported impacts of nanoplastics on human health, including the challenges involved in detecting plastics in a biological environment. We first discuss the possible sources of nanoplastics and their fates and effects in the environment and then describe the possible entry routes of these particles into the human body, as well as their uptake mechanisms at the cellular level. Since the potential risks of environmental nanoplastics to humans have not yet been extensively studied, we focus on studies demonstrating cell responses induced by polystyrene nanoparticles. In particular, the influence of particle size and surface chemistry are discussed, in order to understand the possible risks of nanoplastics for humans and provide recommendations for future studies.
Collapse
|
42
|
Use of a convolutional neural network for the classification of microbeads in urban wastewater. CHEMOSPHERE 2019; 216:271-280. [PMID: 30384295 DOI: 10.1016/j.chemosphere.2018.10.084] [Citation(s) in RCA: 29] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/23/2018] [Revised: 10/08/2018] [Accepted: 10/14/2018] [Indexed: 06/08/2023]
Abstract
Scientists are on the lookout for a practical model that can serve as a standard for sorting out, identifying, and characterizing microplastics which are common occurrences in water sources and wastewaters. The microbeads (MBs) used in cosmetics and discharged into the sewer systems after use cause substantial microplastics pollution in the receiving waters. Today, the use of plastic microbeads in cosmetics is banned. The existing use cases are to be discontinued within a few years. Yet, there are no restrictions regarding the use of microbeads in a number of industries, cleaning products, pharmaceuticals and medical practices. In this context, the determination and classification of MBs which had so far been discharged to water sources and which continue to be discharged, represent crucial problems. In this work, we examined a new approach for the classification of MBs based on microscopic images. For classification purposes, Convolutional Neural Network (CNN) -a Deep Learning algorithm- was employed, whereas GoogLeNet architecture served as the model. The network is built from scratch, and trained then after tested on a total of 42928 images containing MBs in 5 distinct cleansers. The study performed with the CNN which achieved a classification performance of 89% for MBs in wastewater.
Collapse
|
43
|
The first application of quantitative 1H NMR spectroscopy as a simple and fast method of identification and quantification of microplastic particles (PE, PET, and PS). Anal Bioanal Chem 2018; 411:823-833. [DOI: 10.1007/s00216-018-1510-z] [Citation(s) in RCA: 38] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2018] [Revised: 10/18/2018] [Accepted: 11/22/2018] [Indexed: 12/14/2022]
|
44
|
Microplastics in freshwater systems: A review on occurrence, environmental effects, and methods for microplastics detection. WATER RESEARCH 2018; 137:362-374. [PMID: 29580559 DOI: 10.1016/j.watres.2017.12.056] [Citation(s) in RCA: 786] [Impact Index Per Article: 131.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/06/2017] [Accepted: 12/22/2017] [Indexed: 05/22/2023]
Abstract
The continuous increase in synthetic plastic production and poor management in plastic waste have led to a tremendous increase in the dumping into our aqueous environment. Consequently, microplastics commonly defined as sizes less than 5 mm are produced and stay in both seawater and freshwater environment. The presence of microplastics as a new type of emerging contaminant has become a great issue of concerns from public and government authorities. The sources of microplastics to freshwater systems are many with the largest portion from wastewater treatment plants. The abundance of microplastics varies with the location, from above 1 million pieces per cubic meter to less than 1 piece in 100 cubic meters. Microplastics can cause several harmful physical effects on humans and living organisms through such mechanisms as entanglement and ingestion. The microplastics can act as carriers of various toxins such as additives from industrial production processes and persistent contaminants by the sorption in waters. Those toxins may cause great health problems to humans. A few studies on the fishes demonstrated that the microplastics and the associated toxins are bio-accumulated and cause such problems as intestinal damage and change in metabolic profiles. In studies of microplastics, fresh water is first sampled by the nets with typical mesh size of 330 μm for collection of microplastics. After the volume reducing process, the samples will then go through the purification process including density separation by such inorganic salts as sodium chloride and digestion process by oxidizing agents or enzymes. The sequence of these two processes (namely purification and digestion) is dependent on the sample type. The purified samples can be studied by several analytical methods. The commonly used methods for the qualification studies are FTIR spectroscopy, Raman spectroscopy, pyrolysis-GC/MS, and liquid chromatography. A tagging method can be used in the quantification study. Our literature study finds that there is still no universal accepted quantification and qualification tools of microplastics in fresh waters. More work is anticipated so as to obtain accurate information on microplastics in freshwater, which can then be used for the better assessment of the environmental risk.
Collapse
|
45
|
Export of microplastics from land to sea. A modelling approach. WATER RESEARCH 2017; 127:249-257. [PMID: 29059612 DOI: 10.1016/j.watres.2017.10.011] [Citation(s) in RCA: 226] [Impact Index Per Article: 32.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2017] [Revised: 10/05/2017] [Accepted: 10/05/2017] [Indexed: 05/06/2023]
Abstract
Quantifying the transport of plastic debris from river to sea is crucial for assessing the risks of plastic debris to human health and the environment. We present a global modelling approach to analyse the composition and quantity of point-source microplastic fluxes from European rivers to the sea. The model accounts for different types and sources of microplastics entering river systems via point sources. We combine information on these sources with information on sewage management and plastic retention during river transport for the largest European rivers. Sources of microplastics include personal care products, laundry, household dust and tyre and road wear particles (TRWP). Most of the modelled microplastics exported by rivers to seas are synthetic polymers from TRWP (42%) and plastic-based textiles abraded during laundry (29%). Smaller sources are synthetic polymers and plastic fibres in household dust (19%) and microbeads in personal care products (10%). Microplastic export differs largely among European rivers, as a result of differences in socio-economic development and technological status of sewage treatment facilities. About two-thirds of the microplastics modelled in this study flow into the Mediterranean and Black Sea. This can be explained by the relatively low microplastic removal efficiency of sewage treatment plants in the river basins draining into these two seas. Sewage treatment is generally more efficient in river basins draining into the North Sea, the Baltic Sea and the Atlantic Ocean. We use our model to explore future trends up to the year 2050. Our scenarios indicate that in the future river export of microplastics may increase in some river basins, but decrease in others. Remarkably, for many basins we calculate a reduction in river export of microplastics from point-sources, mainly due to an anticipated improvement in sewage treatment.
Collapse
|
46
|
Comparison of different methods for MP detection: What can we learn from them, and why asking the right question before measurements matters? ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2017; 231:1256-1264. [PMID: 28941715 DOI: 10.1016/j.envpol.2017.08.074] [Citation(s) in RCA: 164] [Impact Index Per Article: 23.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/16/2017] [Revised: 08/18/2017] [Accepted: 08/19/2017] [Indexed: 05/09/2023]
Abstract
In recent years, an increasing trend towards investigating and monitoring the contamination of the environment by microplastics (MP) (plastic pieces < 5 mm) has been observed worldwide. Nonetheless, a reliable methodology that would facilitate and automate the monitoring of MP is still lacking. With the goal of selecting practical and standardized methods, and considering the challenges in microplastics detection, we present here a critical evaluation of two vibrational spectroscopies, Raman and Fourier transform infrared (FTIR) spectroscopy, and two extraction methods: thermal extraction desorption gas chromatography mass spectrometry (TED-GC-MS) and liquid extraction with subsequent size exclusion chromatography (SEC) using a soil with known contents of PE, PP, PS and PET as reference material. The obtained results were compared in terms of measurement time, technique handling, detection limits and requirements for sample preparation. The results showed that in designing and selecting the right methodology, the scientific question that determines what needs to be understood is significant, and should be considered carefully prior to analysis. Depending on whether the object of interest is quantification of the MP particles in the sample, or merely a quick estimate of sample contamination with plastics, the appropriate method must be selected. To obtain overall information about MP in environmental samples, the combination of several parallel approaches should be considered.
Collapse
|
47
|
Microplastics releasing from personal care and cosmetic products in China. MARINE POLLUTION BULLETIN 2017; 123:122-126. [PMID: 28911870 DOI: 10.1016/j.marpolbul.2017.09.016] [Citation(s) in RCA: 120] [Impact Index Per Article: 17.1] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/19/2017] [Revised: 09/05/2017] [Accepted: 09/08/2017] [Indexed: 05/23/2023]
Abstract
Microplastics (MPs) have become a major global issue; their release from various products affects the aquatic environment, especially marine ecosystems. As a primary source of MPs, personal care and cosmetics products (PCCPs) containing MPs contribute to this environmental risk. We visited several supermarket chains in Beijing, China to identify PCCPs containing MPs. Overall, 7.1% of facial cleansers contained MPs, with an average weight of 25.04±10.69mgMP/g and average size of 313±130μm; whereas, 2.2% of shower gel products contained an average weight of 17.80±7.50mgMPs/g with an average size of 422±185μm. The majority of MPs were made of polyethylene, based on Raman and Fourier transform-infrared spectra analyses, while only a few were made of walnut shells and carbon particles. Finally, estimated 39tons MPs were released into the environment based on PCCPs use in China based on available data.
Collapse
|
48
|
Analysis of environmental microplastics by vibrational microspectroscopy: FTIR, Raman or both? Anal Bioanal Chem 2016; 408:8377-8391. [DOI: 10.1007/s00216-016-9956-3] [Citation(s) in RCA: 328] [Impact Index Per Article: 41.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2016] [Revised: 09/08/2016] [Accepted: 09/19/2016] [Indexed: 10/20/2022]
|
49
|
Microplastics in the aquatic and terrestrial environment: sources (with a specific focus on personal care products), fate and effects. ENVIRONMENTAL SCIENCES EUROPE 2016; 28:2. [PMID: 27752437 PMCID: PMC5044952 DOI: 10.1186/s12302-015-0069-y] [Citation(s) in RCA: 664] [Impact Index Per Article: 83.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/08/2015] [Accepted: 12/22/2015] [Indexed: 05/18/2023]
Abstract
Due to the widespread use and durability of synthetic polymers, plastic debris occurs in the environment worldwide. In the present work, information on sources and fate of microplastic particles in the aquatic and terrestrial environment, and on their uptake and effects, mainly in aquatic organisms, is reviewed. Microplastics in the environment originate from a variety of sources. Quantitative information on the relevance of these sources is generally lacking, but first estimates indicate that abrasion and fragmentation of larger plastic items and materials containing synthetic polymers are likely to be most relevant. Microplastics are ingested and, mostly, excreted rapidly by numerous aquatic organisms. So far, there is no clear evidence of bioaccumulation or biomagnification. In laboratory studies, the ingestion of large amounts of microplastics mainly led to a lower food uptake and, consequently, reduced energy reserves and effects on other physiological functions. Based on the evaluated data, the lowest microplastic concentrations affecting marine organisms exposed via water are much higher than levels measured in marine water. In lugworms exposed via sediment, effects were observed at microplastic levels that were higher than those in subtidal sediments but in the same range as maximum levels in beach sediments. Hydrophobic contaminants are enriched on microplastics, but the available experimental results and modelling approaches indicate that the transfer of sorbed pollutants by microplastics is not likely to contribute significantly to bioaccumulation of these pollutants. Prior to being able to comprehensively assess possible environmental risks caused by microplastics a number of knowledge gaps need to be filled. However, in view of the persistence of microplastics in the environment, the high concentrations measured at some environmental sites and the prospective of strongly increasing concentrations, the release of plastics into the environment should be reduced in a broad and global effort regardless of a proof of an environmental risk.
Collapse
|
50
|
Identification of microplastics by FTIR and Raman microscopy: a novel silicon filter substrate opens the important spectral range below 1300 cm−1 for FTIR transmission measurements. Anal Bioanal Chem 2015; 407:6791-801. [DOI: 10.1007/s00216-015-8850-8] [Citation(s) in RCA: 159] [Impact Index Per Article: 17.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/28/2015] [Revised: 06/10/2015] [Accepted: 06/11/2015] [Indexed: 12/01/2022]
|