Food authentication by PCR-based methods

Simple and rapid identification of beef within 30 min using a new food nucleic acid release agent combined with direct-fast qPCR

Simple and rapid molecular detection technologies for authenticating animal species are urgently needed for food safety and authenticity. This study established a new direct-fast quantitative polymerase chain reaction (qPCR) detection technology for beef to achieve rapid and on-site nucleic acid detection in food. This technology can complete nucleic acid extraction in 4 min using a new type of food nucleic acid-releasing agent, followed by direct amplification of the DNA sample by fast qPCR in 25 min. The results indicated that direct-fast qPCR can specifically identify beef and can also identify 0.00001% of beef components in artificially simulated meat mixtures, with a detection precision variation coefficient of <4%. This method can be used to effectively identify beef in different food samples. As a simple, fast, and accurate molecular detection technology for beef, this method may provide a new tool for the on-site detection of beef components in food.

Rapid and sensitive approaches for detecting food fraud: A review on prospects and challenges

Precise and reliable analytical techniques are required to guarantee food quality in light of the expanding concerns regarding food safety and quality. Because traditional procedures are expensive and time-consuming, quick food control techniques are required to ensure product quality. Various analytical techniques are used to identify and detect food fraud, including spectroscopy, chromatography, DNA barcoding, and inotrope ratio mass spectrometry (IRMS). Due to its quick findings, simplicity of use, high throughput, affordability, and non-destructive evaluations of numerous food matrices, NI spectroscopy and hyperspectral imaging are financially preferred in the food business. The applicability of this technology has increased with the development of chemometric techniques and near-infrared spectroscopy-based instruments. The current research also discusses the use of several multivariate analytical techniques in identifying food fraud, such as principal component analysis, partial least squares, cluster analysis, multivariate curve resolutions, and artificial intelligence.

Disposable amperometric biotool for peanut detection in processed foods by targeting a chloroplast DNA marker

This work reports the development and application of a disposable amperometric sensor built on magnetic microcarriers coupled to an Express PCR strategy to amplify a specific DNA fragment of the chloroplast trnH-psbA. The procedure involves the selective capture of a 68-mer synthetic target DNA (or unmodified PCR products) through sandwich hybridization with RNA capture probe-modified streptavidin MBs and RNA signaling probes, labeled using antibodies specific to the heteroduplexes and secondary antibodies tagged with horseradish peroxidase. Amperometric measurements were performed on screen-printed electrodes using the H2O2/hydroquinone system. Achieving a LOD of 3 pM for the synthetic target, it was possible to detect 2.5 pg of peanut DNA and around 10 mg kg-1 of peanut in binary mixtures (defatted peanut flours prepared in spelt wheat). However, the detectability decreased between 10 and 1000 times in processed samples depending on the treatment. The Express PCR-bioplatform was applied to the detection of peanut traces in foodstuff.

Authentication of important medicinal herbal species through DNA-based molecular characterization

DNA-based molecular markers have great importance among other methods used for the authentication, detection, and identification of medicinal herbal species. Currently, it is more common to identify the medicinal herbal species (monoherbal or polyherbal forms) morphologically by using sensory, macroscopic, and microscopic methods. DNA-based markers made an easy for accurate detection of herbal species by using the polymerase chain reaction (PCR) which involves in vitro amplification of a particular region of DNA sequence. In the current study, we used heterogenic parts for isolation of DNA from twelve important medicinal herbal species followed by purity determination, and yield calculation. We optimized a PCR reaction using universal primer sets to amplify the target DNA followed by DNA sequencing, and species identification. We also performed phylogenetic analysis for determining the evolutionary relationship between the herbal species, by using MEGAX32 software. Further, we prepared adulterated herbal species samples to validate the method. The method was able to amplify the target gene through PCR in 11 out of 12 herbal species samples (sensitivity 91.66%).The DNA from cinnamon could not yield a truly amplified product. On DNA sequencing, all the amplified products were identified as true herbal species (specificity 100%). In the adulterated samples, non-specific DNA bands were observed after performing the PCR reaction, indicating the mixing of more than one herbal species. To conclude, DNA sequencing-based molecular analysis is advantageous for the correct identification, and detection of adulterated herbal species.

Monitoring of Infant Formula and Baby Food for the Pat and NOS Terminator of Genetically Modified Maize and Soybean by Real-time PCR in Iran

BACKGROUND

Soybean and maize are the most cultivated genetically modified (GM) plants. Because of the increase in the imports of GM products to Iran, infant formula and baby food, which is consumed by babies during their first month of life, can also contain soybean and maize. It has become fundamental to screen these types of products.

OBJECTIVES

The present study aimed to investigate the GM corn and soybean in baby food and infant formula using real-time polymerase chain reaction (PCR).

METHODS

A total of 60 baby food and infant formulas were collected randomly from the local drugstores in Tehran. Genomic DNA was extracted from all samples, then by real-time PCR detection, tested Pat/NOS. Internal control genes zein and lectin were used for maize and soybean, respectively.

RESULTS

Results showed that 5% of infant formulas and 5% of baby food, two Iranian and one imported baby food, and two imported and one Iranian infant formula were positive for pat. However, NOS was detected in none of the samples. The results showed positive results for the presence of the pat gene in the products without an appropriate label.

CONCLUSIONS

This article provides evidence of GM maize and soybean presence in baby food and infant formula in Iran.

Adulteration detection technologies used for halal/kosher food products: an overview

In the Islamic and Jewish religions, there are various restrictions that should be followed in order for food products to be acceptable. Some food items like pork or dog meat are banned to be consumed by the followers of the mentioned religions. However, illegally, some food producers in various countries use either the meat or the fat of the banned animals during food production without being mentioned in the label on the final products, and this considers as food adulteration. Nowadays, halal or kosher labeled food products have a high economic value, therefore deceiving the consumers by producing adulterated food is an illegal business that could make large gains. On the other hand, there is an insistent need from the consumers for getting reliable products that comply with their conditions. One of the main challenges is that the detection of food adulteration and the presence of any of the banned ingredients is usually unnoticeable and cannot be determined by the naked eye. As a result, scientists strove to develop very sensitive and precise analytical techniques. The most widely utilized techniques for the detection and determination of halal/kosher food adulterations can be listed as High-Pressure Liquid Chromatography (HPLC), Capillary Electrophoresis (CE), Gas Chromatography (GC), Electronic Nose (EN), Polymerase Chain Reaction (PCR), Enzyme-linked Immuno Sorbent Assay (ELISA), Differential Scanning Calorimetry (DSC), Nuclear Magnetic Resonance (NMR), Near-infrared (NIR) Spectroscopy, Laser-induced Breakdown Spectroscopy (LIBS), Fluorescent Light Spectroscopy, Fourier Transform Infrared (FTIR) Spectroscopy and Raman Spectroscopy (RS). All of the above-mentioned techniques were evaluated in terms of their detection capabilities, equipment and analysis costs, accuracy, mobility, and needed sample volume. As a result, the main purposes of the present review are to identify the most often used detection approaches and to get a better knowledge of the existing halal/kosher detection methods from a literature perspective.

Heat-Treated Meat Origin Tracing and Authenticity through a Practical Multiplex Polymerase Chain Reaction Approach

Meat adulteration have become a global issue, which has increasingly raised concerns due to not only economic losses and religious issues, but also public safety and its negative effects on human health. Using optimal primers for seven target species, a multiplex PCR method was developed for the molecular authentication of camel, cattle, dog, pig, chicken, sheep and duck in one tube reaction. Species-specific amplification from the premixed total DNA of seven species was corroborated by DNA sequencing. The limit of detection (LOD) is as low as 0.025 ng DNA for the simultaneous identification of seven species in both raw and heat-processed meat or target meat: as little as 0.1% (w/w) of the total meat weight. This method is strongly reproducible even while exposed to intensively heat-processed meat and meat mixtures, which renders it able to trace meat origins in real-world foodstuffs based on the authenticity assessment of commercial meat samples. Therefore, this method is a powerful tool for the inspection of meat adulterants and has broad application prospects.

Development and Validation of a Species-specific PCR Method for the Identification of Ginseng Species Using Orthogonal Approaches

When testing botanical ingredients of herbal medicines and dietary supplements, the complexity of botanical matrixes often requires the use of orthogonal methods to establish identification procedures suitable for quality control purposes. Genomic-based botanical identification methods are evolving and emerging as useful quality control tools to complement traditional morphological and chemical identification methods. Species-specific polymerase chain reaction methods are being evaluated for botanical quality control and as a cost-effective approach to identify and discriminate between closely related botanical species. This paper describes orthogonal identification of Panax ginseng, P. quinquefolius, and P. notoginseng materials in commerce as an example of the development and validation of a set of species-specific polymerase chain reaction methods to establish botanical identity in ginseng roots. This work also explored the possibility of extending the application of species-specific polymerase chain reaction methods to provide species identity information for processed materials, such as steamed roots and hydroalcoholic extracts, and showed success with this approach. Finally, the paper provides recommendations for an out-of-specification investigation of samples that may pass some of the orthogonal tests and fail others.

Detection and characterization of meat adulteration in various types of meat products by using a high-efficiency multiplex polymerase chain reaction technique

Identification of meat authenticity is a matter of increasing concerns due to religious, economical, legal, and public health reasons. However, little is known about the inspection of eight meat species in one tube reaction due to technological challenge of multiplex polymerase chain reaction (PCR) techniques. Here, a developed multiplex PCR method can simultaneously authenticate eight meat species including ostrich (753 bp), cat (564 bp), goose (391 bp), duck (347 bp), chicken (268 bp), horse (227 bp), dog (190 bp), and sheep (131 bp). The detectable deoxyribonucleic acid (DNA) contents for each target species was as low as 0.01 ng in both raw and heat-treated meat or target meat down to 0.1% (w/w) of total meat weight reflecting high stability of the assay in heat processing condition, indicating that this method is adequate for tracing meat origin in real-world meat products, which has been further validated by authenticity assays of commercial meat products. Overall, this method is a powerful tool for accurate evaluation of meat origin with a good application foreground.

Identification of matB used as an endogenous reference gene for the qualitative and real-time quantitative polymerase chain reaction detection of Lentinus edodes

Lentinus edodes is a fungus with rich nutritional value and good medicinal value and has accordingly become a substitute for other expensive wild edible mushrooms. In this study, for the first time, the matB gene was selected as an endogenous reference gene of L. edodes and identified as the species-specific gene. The matB genes of L. edodes and 18 non-L. edodes species were determined by qualitative polymerase chain reaction (PCR), but no amplification was found in non-L. edodes species. In SYBR Green quantitative PCR analysis, the detection limit was as low as 16 pg/µl of DNA template. All of these experiments indicated that the matB gene is an ideal reference gene and can detect L. edodes material through qualitative and quantitative PCR assays. It also provides a convenient and accurate approach for the detection of L. edodes products and the adulteration in wild edible mushroom products.

Application of DNA barcoding for ensuring food safety and quality

With increasing international food trade, food quality and safety are high priority worldwide. The consumption of contaminated and adulterated food can cause serious health problems such as infectious diseases and allergies. Therefore, the authentication and traceability systems are needed to improve food safety. The mitochondrial DNA can be used for species authentication of food and food products. Effective DNA barcode markers have been developed to correctly identify species. The US FDA approved to the use of DNA barcoding for various food products. The DNA barcoding technology can be used as a regulatory tool for identification and authenticity. The application of DNA barcoding can reduce the microbiological and toxicological risks associated with the consumption of food and food products. DNA barcoding can be a gold-standard method in food authenticity and fraud detection. This review describes the DNA barcoding method for preventing food fraud and adulteration in meat, fish, and medicinal plants.

A microfluidic diagnostic device with air plug-in valves for the simultaneous genetic detection of various food allergens

The identification of accidental allergen contamination in processed foods is crucial for risk management strategies in the food processing industry to effectively prevent food allergy incidents. Here, we propose a newly designed passive stop valve with high pressure resistance performance termed an “air plug-in valve” to further improve microfluidic devices for the detection of target nucleic acids. By implementing the air plug-in valve as a permanent stop valve, a maximal allowable flow rate of 70 µL/min could be achieved for sequential liquid dispensing into an array of 10 microchambers, which is 14 times higher than that achieved with the previous valve arrangement using single-faced stop valves. Additionally, we demonstrate the simultaneous detection of multiple food allergens (wheat, buckwheat, and peanut) based on the colorimetric loop-mediated isothermal amplification assay using our diagnostic device with 10 microchambers compactly arranged in a 20-mm-diameter circle. After running the assays at 60 °C for 60 min, any combination of the three types of food allergens and tea plant, which were used as positive and negative control samples, respectively, yielded correct test results, without any cross-contamination among the microchambers. Thus, our diagnostic device will provide a rapid and easy sample-to-answer platform for ensuring food safety and security.

A Heptaplex PCR Assay for Molecular Traceability of Species Origin With High Efficiency and Practicality in Both Raw and Heat Processing Meat Materials

Frequent meat frauds have become a global issue because adulteration risks the food safety, breaches market rules, and even threatens public health. Multiplex PCR is considered to be a simple, fast, and inexpensive technique that can be applied for the identification of meat products in food industries. However, relatively less is known about a multiplex PCR method authenticating seven animal species simultaneously in one reaction due to technological challenge. Through screening new species-specific primers and optimizing PCR system, a heptaplex PCR method was established, which could simultaneously detect seven meat ingredients of camel (128 bp), pigeon (157 bp), chicken (220 bp), duck (272 bp), horse (314 bp), beef (434 bp), and pork (502 bp) in a single-tube reaction. DNA sequencing solidly validated that each set of primers specifically amplified target species from total DNA mixtures of seven meat species. The developed multiplex assay was stable and sensitive enough to detect 0.01–0.025 ng DNA from various meat treatments including raw, boiled, and autoclaved meat samples or target meat content of 0.1% total meat weight, suggesting the suitability of the heptaplex PCR technique for tracing target meats with high accuracy and precision. Most importantly, a market survey validated the availability of this multiplex PCR technique in real-world meat products with a good application foreground.

Animal Species Authentication in Dairy Products

Milk is one of the most important nutritious foods, widely consumed worldwide, either in its natural form or via dairy products. Currently, several economic, health and ethical issues emphasize the need for a more frequent and rigorous quality control of dairy products and the importance of detecting adulterations in these products. For this reason, several conventional and advanced techniques have been proposed, aiming at detecting and quantifying eventual adulterations, preferentially in a rapid, cost-effective, easy to implement, sensitive and specific way. They have relied mostly on electrophoretic, chromatographic and immunoenzymatic techniques. More recently, mass spectrometry, spectroscopic methods (near infrared (NIR), mid infrared (MIR), nuclear magnetic resonance (NMR) and front face fluorescence coupled to chemometrics), DNA analysis (real-time PCR, high-resolution melting analysis, next generation sequencing and droplet digital PCR) and biosensors have been advanced as innovative tools for dairy product authentication. Milk substitution from high-valued species with lower-cost bovine milk is one of the most frequent adulteration practices. Therefore, this review intends to describe the most relevant developments regarding the current and advanced analytical methodologies applied to species authentication of milk and dairy products.

Use of MALDI-TOF MS technology to evaluate adulteration of small ruminant milk with raw bovine milk

Detection of adulteration of small ruminant milk is very important for health and commercial reasons. New analytical and cost-effective methods need to be developed to detect new adulteration practices. In this work, we aimed to explore the ability of the MALDI-TOF mass spectrometry to detect bovine milk in caprine and ovine milk using samples from 18 dairy farms. Different levels of adulteration (0.5, 1, 5, 10, 20, 40, 60, and 80%) were analyzed during the lactation period of goat and sheep (in May, from 60 to 90 d in milk, and in August, from 150 to 180 d in milk). Two different ranges of peptide-protein spectra (500-4,000 Da; 4-20 kDa) were used to establish a calibration model for predicting the concentration of adulterant using partial least squares and generalized linear model with lasso regularization. The low molecular weight part of the spectra together with the generalized linear model with lasso regularization regression model appeared to have greater potential for our aim of detection of adulteration of small ruminants' milk. The subsequent prediction model was able to predict the concentration of bovine milk in caprine milk with a root mean square error of 11.4 and 17.0% in ovine milk. The results offer compelling evidence that MALDI-TOF can detect the adulteration of small ruminants' milk. However, the method is severely limited by (1) the complexity of the milk proteome resulting from the adulteration technique, (2) the potential degradation of thermolabile proteins, and (3) the genetic variability of tested samples. Additionally, the root mean square error of prediction based only on one individual sample adulteration series can drop down to 6.34% for quantification of adulterated caprine milk and 6.28% for adulterated ovine milk for the full set of concentrations or down to 2.33 and 4.00%, respectively, if we restrict only to low concentrations of adulteration (0, 0.5, 1, 5, 10%).

Near-infrared techniques for fraud detection in dairy products: A review

The dairy products sector is an important part of the food industry, and their consumption is expected to grow in the next 10 years. Therefore, the authentication of these products in a faster and precise way is required for the sake of public health. This review proposes the use of near-infrared techniques for the detection of food fraud in dairy products as they are faster, nondestructive, environmentally friendly, do not require sample preparation, and allow multiconstituent analysis. First, we have described frequent forms of food fraud in dairy products and the application of traditional techniques for their detection, highlighting gaps and counterproductive characteristics for the actual global food chain, as longer sample preparation time and use of reagents. Then, the application of near-infrared spectroscopy and hyperspectral imaging for the detection of food fraud mainly in cheese, butter, and yogurt are described. As these techniques depend on model development, the coverage of different dairy products by the literature will promote the identification of food fraud in a faster and reliable way.

Molecular Authentication of Twelve Meat Species Through a Promising Two-Tube Hexaplex Polymerase Chain Reaction Technique

Frequent meat frauds have aroused significant social attention. The aim of this study is to construct a two-tube hexaplex polymerase chain reaction (PCR) method offering accurate molecular authentication of twelve meat species in actual adulteration event. Deoxyribonucleic acid (DNA) sequencing demonstrates that designed primers can specifically amplify target species from genomic DNA mixture of six species in each tube reaction, which showed 100% accuracy of horse (148 bp), pigeon (218 bp), camel (283 bp), rabbit (370 bp), ostrich (536 bp), and beef (610 bp) as well as turkey (124 bp), dog (149 bp), chicken (196 bp), duck (277 bp), cat (380 bp), and goose (468 bp). A species-specific primer pair produced the target band in the presence of target genomic DNA but not non-target species. Through multiplex PCR assays with serial concentration of the DNA mixture of six species in each PCR reaction, the detection limit (LOD) of the two-tube hexaplex PCR assay reached up to 0.05–0.1 ng. Using genomic DNA isolated from both boiled and microwave-cooked meat as templates, PCR amplification generated expected PCR products. These findings demonstrate that the proposed method is specific, sensitive and reproducible, and is adequate for food inspection. Most importantly, this method was successfully applied to detect meat frauds in commercial meat products. Therefore, this method is of great importance with a good application foreground.

DNA-Based Tools to Certify Authenticity of Rice Varieties—An Overview

Rice (Oryza sativa L.) is one of the most cultivated and consumed crops worldwide. It is mainly produced in Asia but, due to its large genetic pool, it has expanded to several ecosystems, latitudes and climatic conditions. Europe is a rice producing region, especially in the Mediterranean countries, that grow mostly typical japonica varieties. The European consumer interest in rice has increased over the last decades towards more exotic types, often more expensive (e.g., aromatic rice) and Europe is a net importer of this commodity. This has increased food fraud opportunities in the rice supply chain, which may deliver mixtures with lower quality rice, a problem that is now global. The development of tools to clearly identify undesirable mixtures thus became urgent. Among the various tools available, DNA-based markers are considered particularly reliable and stable for discrimination of rice varieties. This review covers aspects ranging from rice diversity and fraud issues to the DNA-based methods used to distinguish varieties and detect unwanted mixtures. Although not exhaustive, the review covers the diversity of strategies and ongoing improvements already tested, highlighting important advantages and disadvantages in terms of costs, reliability, labor-effort and potential scalability for routine fraud detection.

Challenges in Medicinal and Aromatic Plants DNA Barcoding-Lessons from the Lamiaceae

The potential value of DNA barcoding for the identification of medicinal plants and authentication of traded plant materials has been widely recognized; however, a number of challenges remain before DNA methods are fully accepted as an essential quality control method by industry and regulatory authorities. The successes and limitations of conventional DNA barcoding are considered in relation to important members of the Lamiaceae. The mint family (Lamiaceae) contains over one thousand species recorded as having a medicinal use, with many more exploited in food and cosmetics for their aromatic properties. The family is characterized by a diversity of secondary products, most notably the essential oils (EOs) produced in external glandular structures on the aerial parts of the plant that typify well-known plants of the basil (Ocimum), lavender (Lavandula), mint (Mentha), thyme (Thymus), sage (Salvia) and related genera. This complex, species-rich family includes widely cultivated commercial hybrids and endangered wild-harvested traditional medicines, and examples of potential toxic adulterants within the family are explored in detail. The opportunities provided by next generation sequencing technologies to whole plastome barcoding and nuclear genome sequencing are also discussed with relevant examples.

Development of a DNA Metabarcoding Method for the Identification of Bivalve Species in Seafood Products

The production of bivalve species has been increasing in the last decades. In spite of strict requirements for species declaration, incorrect labelling of bivalve products has repeatedly been detected. We present a DNA metabarcoding method allowing the identification of bivalve species belonging to the bivalve families Mytilidae (mussels), Pectinidae (scallops), and Ostreidae (oysters) in foodstuffs. The method, developed on Illumina instruments, targets a 150 bp fragment of mitochondrial 16S rDNA. We designed seven primers (three primers for mussel species, two primers for scallop species and a primer pair for oyster species) and combined them in a triplex PCR assay. In each of eleven reference samples, the bivalve species was identified correctly. In ten DNA extract mixtures, not only the main component (97.0-98.0%) but also the minor components (0.5-1.5%) were detected correctly, with only a few exceptions. The DNA metabarcoding method was found to be applicable to complex and processed foodstuffs, allowing the identification of bivalves in, e.g., marinated form, in sauces, in seafood mixes and even in instant noodle seafood. The method is highly suitable for food authentication in routine analysis, in particular in combination with a DNA metabarcoding method for mammalian and poultry species published recently.

Development and validation of simultaneous identification of 26 mammalian and poultry species by a multiplex assay

A multiplex PCR assay was developed to simultaneously identify 22 mammalian species (alpaca, Asiatic black bear, Bactrian camel, brown rat, cat, cattle, common raccoon, dog, European rabbit, goat, horse, house mouse, human, Japanese badger, Japanese wild boar, masked palm civet, pig, raccoon dog, red fox, sheep, Siberian weasel, and sika deer) and four poultry species (chicken, domestic turkey, Japanese quail, and mallard), even from a biological sample containing a DNA mixture of multiple species. The assay was designed to identify species through multiplex PCR and capillary electrophoresis, with a combination of amplification of a partial region of the mitochondrial D-loop by universal primer sets and a partial region of the cytochrome b (cyt b) gene by species-specific primer sets. The assay was highly sensitive, with a detection limit of 100 copies of mitochondrial DNA. The assay's ability to identify species from complex DNA mixtures was demonstrated using an experimental sample consisting of 10 species. Efficacy, accuracy, and reliability of the assay were validated for use in forensic analysis with the guidelines of Scientific Working Group on DNA Analysis Methods (SWGDAM). The multiplex PCR assay developed in this study enables cost-effective, highly sensitive, and simultaneous species identification without massively parallel sequencing (MPS) platforms. Thus, the technique described is straightforward and suitable for routine forensic investigations.

Application of Next-Generation Sequencing Technology Based on Single Gene Locus in Species Identification of Mixed Meat Products

Polymerase chain reaction (PCR) detection is a commonly used method for species identification of meat products. However, this method is not suitable for the analysis of meat products containing multiple mixtures. This study aimed to test whether next-generation sequencing (NGS) technology could be used as a method for the certification of mixed meat products. In this study, five kinds of common meat (pigs, cattle, sheep, chickens, and ducks) were mixed as samples with different proportions. The primers designed from mitochondrial 16S rRNA and nuclear genome gene (growth hormone receptor, GHR), respectively, were used to detect these meats. The sequencing results of NGS were analyzed using a self-designed bioinformatics program. The fragments with similar sequences were classified and compared with the database to determine their species. The results showed that all five kinds of meat components could be correctly identified using these two primers. The meat composition could be detected as low as 0.5% in the mixed samples using the NGS technology targeting GHR gene fragments, which was superior to those targeting mitochondrial 16S rRNA. However, the quantitative detection of species in the mixture was not likely to be quite accurate due to the amplification bias of PCR amplification. These results showed that the NGS technology could be applied to identify meat species in mixtures.

Whey allergens: Influence of nonthermal processing treatments and their detection methods

Whey and its components are recognized as value-added ingredients in infant formulas, beverages, sports nutritious foods, and other food products. Whey offers opportunities for the food industrial sector to develop functional foods with potential health benefits due to its unique physiological and functional attributes. Despite all the above importance, the consumption of whey protein (WP) can trigger hypersensitive reactions and is a constant threat for sensitive individuals. Although avoiding such food products is the most successful approach, there is still a chance of incorrect labeling and cross-contamination during food processing. As whey allergens in food products are cross-reactive, the phenomenon of homologous milk proteins of various species may escalate to a more serious problem. In this review, nonthermal processing technologies used to prevent and eliminate WP allergies are presented and discussed in detail. These processing technologies can either enhance or mitigate the impact of potential allergenicity. Therefore, the development of highly precise analytical technologies to detect and quantify the existence of whey allergens is of considerable importance. The present review is an attempt to cover all the updated approaches used for the detection of whey allergens in processed food products. Immunological and DNA-based assays are generally used for detecting allergenic proteins in processed food products. In addition, mass spectrometry is also employed as a preliminary technique for detection. We also highlighted the latest improvements in allergen detection toward biosensing strategies particularly immunosensors and aptasensors.

DNA, protein and aptamer-based methods for seafood allergens detection: Principles, comparisons and updated applications

The increasing number of people with seafood allergy has caused a series of problems for practitioners and consumers in the seafood industry year by year. Thereby, development of efficient, convenient and low-cost allergen detection methods is urgently needed. This review introduces three important existing seafood allergen detection methods associated with DNA-based, protein-based and aptamer-based. Their principles and biological characteristics are firstly presented. The core of these three methods are DNA amplification techniques, specific binding of antigens and antibodies, and specific binding of aptamers and ligands, respectively. Among them, DNA-based detection method is an indirect analysis, which takes the gene of allergen as the detection object and is characterized by good stability and high sensitivity. Protein-based and aptamer-based, methods employ indirect analysis for allergen detection. The difference is that the latter uses an easily synthesized and highly efficient aptamer as the detection probe, showing great promising potentials. The advantages and disadvantages of the three mentioned detection methods are also discussed. In the future, as more efficient and reliable detection methods for seafood allergens come into practice, the possibility of seafood allergy patients eating seafood products by mistake will be greatly reduced, which will ensure the food safety and the health of allergy patients.

Physicochemical Properties and Drivers of Liking and Disliking for Cooked Rice Containing Various Types of Processed Whole Wheat

For utilization of whole wheat (WW) in cooked rice products, WW was processed by four different methods (steeping (S_WW), milling (M_WW), enzymatic treatment (E_WW), and passing through a roll mill (1 mm) (R_WW)). Additionally, the physicochemical properties of cooked rice containing various processed wheat were investigated. The hardness of the cooked rice decreased significantly with R_WW and E_WW compared to WW. As a result of a consumer acceptance test, the cooked rice samples containing M_WW and E_WW with high liking scores frequently included 'chewiness' as a reason for liking, and the cooked rice with WW and S_WW was mentioned as being 'too hard' as a reason for disliking. The cooked rice with R_WW, which had the lowest liking score, was mentioned as having appearance characteristics such as 'husk', 'clumpy appearance', and 'messy appearance' as reasons for disliking. The overall results of this study suggest the inclusion of M_WW or E_WW with cooked rice considering health-related benefits and consumer acceptability.

A Simple and Reliable Single Tube Septuple PCR Assay for Simultaneous Identification of Seven Meat Species

Multiplex PCR methods have been frequently used for authentication of meat product adulteration. Through screening of new species-specific primers designed based on the mitochondrial DNA sequences, a septuple PCR method is ultimately developed and optimized to simultaneously detect seven species including turkey (110 bp), goose (194 bp), pig (254 bp), sheep (329 bp), beef (473 bp), chicken (612 bp) and duck (718 bp) in one reaction. The proposed method has been validated to be specific, sensitive, robust and inexpensive. Taken together, the developed septuple PCR assay is reliable and efficient, not only to authenticate animal species in commercial meat products, but also easily feasible in a general laboratory without special infrastructures.

Evaluation of DNA extraction methods for molecular traceability in cold pressed, solvent extracted and refined groundnut oils

Groundnut oil (GNO)/peanut oil is one of the agro-food products with great economic value and hence an attractive target for adulteration and mislabeling. Simple Sequence Repeats (SSR) are markers of choice for DNA fingerprinting studies as they exhibit high polymorphism due to variable number of repeats. Hence, this study was designed to evaluate and optimize a method for DNA isolation from groundnut oil and study the possibility of using the isolated DNA for molecular traceability using SSR markers. Four methods to isolate DNA from groundnut oil were evaluated. All the four methods were modified CTAB protocols, but differed in procedures for extraction, buffer compositions, amount of oil used and DNA carriers. For molecular traceability of oils, extraction and recovery of DNA from edible oil is a key step, especially in refined oils. A method that employed DNA enrichment prior to extraction with CTAB buffer yielded amplifiable DNA from cold pressed GNO, crude hexane extracted GNO and refined GNO. The optimized method for isolation of DNA from groundnut oil is simple, efficient, less costly and reproducible when compared to chromatography and spectroscopy based techniques.

Authentication of Frozen Chilean Blue Mussel (Mytilus chilensis) Commercialized in the Town of Osorno, Southern Chile, Using PCR-RFLP Analysis

BACKGROUND

DNA-based technologies are reliable authentication methods for food products, enabling the detection of fraud, non-intentional substitution and control of mislabeling. The Chilean blue mussel (Mytilus chilensis) is a seafood commercialized in Chile under different formats, including packages of frozen specimens. In this format, the valves of mussels are removed during processing, thus impeding identification of the product by the consumer due to the lack of external characters.

OBJECTIVE

To assess the authenticity of frozen Chilean blue mussels commercialized in southern Chile, particularly in the town of Osorno.

METHODS

Six commercial brands of frozen Chilean blue mussel were authenticated by the Polymerase Chain Reaction-Restriction Fragment Length Polymorphism (PCR-RFLP) method, based on the analysis of an 18S rDNA fragment.

RESULTS

Restriction patterns obtained indicate that three brands (50%) proved to be 100% authentic, given that all specimens contained in the package were Chilean blue mussels. The other three brands (50%) contained specimens of other commercial mytilids, particularly the cholga mussel (Aulacomya ater), in a variable percentage (12.5-50%).

CONCLUSION

This study based on the PCR-RFLP method provides evidence that Chilean blue mussels commercialized in a town located in southern Chile lack authenticity. This finding highlights the necessity for national producers to improve the production and/or packaging processes of this seafood. The authentication of commercial mussels is a matter of consumer interest and has been described in a recent patent on this issue that proposes an alternative methodology.

DNA barcoding: a modern age tool for detection of adulteration in food

Globalization of the food trade requires precise and exact information about the origin, methods of production, transformation technologies, authentication, and the traceability of foodstuffs. New challenges in food supply chains such as deliberate fraudulent substitution, tampering or mislabeling of food and its ingredients or food packaging incapacitates the market and eventually the national economy. Currently, no proper standards have been established for the authentication of most of the food materials. However, in order to control food fraud, various robust and cost-effective technologies have been employed, like a spectrophotometer, GC-MS, HPLC, and DNA barcoding. Among these techniques, DNA barcoding is a biotechnology advantage with the principle of using 400-800 bp long standardized unique DNA sequences of mitochondrial (e.g. COI) or plastidial (e.g. rbcL) of nuclear origin (e.g. ITS) to analyze and classify the food commodities. This review covers several traded food commodities like legumes, seafood, oils, herbal products, spices, fruits, cereals, meat, and their unique barcodes which are critically analyzed to detect adulteration or fraud. DNA barcoding is a global initiative and it is being accepted as a global standard/marker for species identification or authentication. The research laboratories and industries should collaborate to realize its potential in setting standards for quality assurance, quality control, and food safety for different food products.

Chilean Salmon Sushi: Genetics Reveals Product Mislabeling and a Lack of Reliable Information at the Point of Sale

Species diagnosis is essential to assess the level of mislabeling or misnamed seafood products such as sushi. In Chile, sushi typically includes salmon as the main ingredient, but species used are rarely declared on the menu. In order to identify which species are included in the Chilean sushi market, we analyzed 84 individual sushi rolls sold as "salmon" from sushi outlets in ten cities across Chile. Using a polymerase chain reaction-restriction fragment length polymorphism protocol (PCR-RFLP), we identified mislabeled and misnamed products. Atlantic salmon was the most common salmonid fish used in sushi, followed by coho salmon, rainbow trout, and Chinook salmon. We found a total of 23% and 18% of the products were mislabeled and misnamed, respectively. In 64% of cases, the salesperson selling the product could not identify the species. We also identified the use of wild-captured Chinook salmon samples from a naturalized population. Our results provide a first indication regarding species composition in Chilean sushi, a quantification of mislabeling and the level of misinformation declared by sales people to consumers. Finally, considering that Chinook salmon likely originates from a non-licensed origin and that sushi is an uncooked product, proper identification in the food production chain may have important consequences for the health of consumers.

Current issues for mammalian species identification in forensic science: a review

Mammalian species identification is one of the important issues in forensic science. Determining the origins of non-human biological material found at crime scenes can increase the possibility of identifying the true culprit by narrowing down the range of suspects. Although many techniques based on mitochondrial DNA (mtDNA) have been developed, challenges remain to cost-effectively identify species from degraded samples containing a mixture of DNA from multiple species and to standardize procedures for mammalian species identification. This review evaluates the reliability and versatility of mtDNA-based techniques to reveal obstacles to the establishment of standard analytical methods, with a particular focus on DNA mixtures. When samples contain a mixture of DNA from multiple species, the interpretation of sequencing analysis results is difficult. Although DNA metabarcoding using next-generation sequencing (NGS) technologies can overcome the DNA mixture problem, DNA metabarcoding is not suitable for the type of small-scale analysis routinely performed by local forensic laboratories, primarily because it is costly and time-consuming. By contrast, fluorescent multiplex PCR analysis enables cost-effective and simultaneous species identification from suboptimal samples, although the number of identifiable species is currently limited in comparison with sequencing techniques. The advantages and limitations of current techniques presented in this review indicate that multiplex PCR analysis will continue to be important for mammalian species identification in forensic casework analysis. Further developments in multiplex PCR analysis that enable the identification of an increased number of species will play a key step for standardization efforts among forensic laboratories.

DNA barcoding coupled with high-resolution melting analysis for nut species and walnut milk beverage authentication

BACKGROUND

Walnut (Juglans regia L.) is one of the most widely cultivated nuts. Walnut milk beverage is very popular in China due to its nutritional value. However, adulterated walnut milk ingredients have been detected in the Chinese market. Peanut and soybean are sold at much lower prices than walnut and are reported to be commonly used for adulteration in the industrial chain of walnut milk production. The purpose of this study is therefore to develop an accurate and efficient method for detecting the authenticity of the raw materials used in walnut milk beverage.

RESULTS

DNA barcoding and high-resolution melting (HRM) analyses were used to identify common adulterated raw ingredients such as peanut and soybean in commercial walnut milk beverage samples. The chloroplast psbA-trnH gene was used for sequencing, and HRM analysis was performed. We also prepared experimental mixtures, in the laboratory, with different quantities of walnut, peanut, and soybean. High-resolution melting analysis of the experimental mixtures clearly distinguished all of them. The results revealed that most of the walnut milk beverage samples fell in the same cluster of walnut species. Several samples fell in the peanut cluster, confirming that they were adulterated products.

CONCLUSION

The results revealed that HRM analysis based on the psbA-trnH barcode sequence can be used to identify raw ingredients in walnut milk beverages. © 2020 Society of Chemical Industry.