Determination of bilayer thickness and lipid surface area in unilamellar dimyristoylphosphatidylcholine vesicles from small-angle neutron scattering curves: a comparison of evaluation methods

Small-Angle Neutron Scattering Study of a Phosphatidylcholine-Phosphatidylethanolamine Mixture

The properties of single-component phospholipid lipid bilayers have been extensively characterized. Natural cell membranes are not so simple, consisting of a diverse mixture of lipids and proteins. While having detailed structural information on complex membranes would be useful for understanding their structure and function, experimentally characterizing such membranes at a level of detail applied to model phospholipid bilayers is challenging. Here, small-angle neutron scattering with selective deuteration was used to characterize a binary lipid mixture composed of 1,2-dimyristoyl-3-sn-glycero-phosphatidylcholine and 1,2-dimyristoyl-3-sn-glycero-phosphatidylethanolamine. The data analysis provided the area per lipid in each leaflet as well as the asymmetry of the composition of the inner and outer leaflets of the bilayer. The results provide new insight into the structure of the lipid bilayer when this lipid mixture is used to prepare vesicles.

Interactions between DMPC Model Membranes, the Drug Naproxen, and the Saponin β-Aescin

In this study, the interplay among the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) as a model membrane, the nonsteroidal anti-inflammatory drug naproxen, and the saponin β-aescin are investigated. The naproxen amount was fixed to 10 mol%, and the saponin amount varies from 0.0 to 1.0 mol%. Both substances are common ingredients in pharmaceutics; therefore, it is important to obtain deeper knowledge of their impact on lipid membranes. The size and properties of the DMPC model membrane upon naproxen and aescin addition were characterized with differential scanning calorimetry (DSC), small- and wide-angle X-ray scattering (SAXS, WAXS), and photon correlation spectroscopy (PCS) in a temperature-dependent study. The interaction of all substances was dependent on the lipid phase state, which itself depends on the lipid's main phase transition temperature Tm. The incorporation of naproxen and aescin distorted the lipid membrane structure and lowers Tm. Below Tm, the DMPC-naproxen-aescin mixtures showed a vesicle structure, and the insertion of naproxen and aescin influenced neither the lipid chain-chain correlation distance nor the membrane thickness. Above Tm, the insertion of both molecules instead induced the formation of correlated bilayers and a decrease in the chain-chain correlation distance. The presented data clearly confirm the interaction of naproxen and aescin with DMPC model membranes. Moreover, the incorporation of both additives into the model membranes is evidenced.

Water Content in Nanoparticles Determined by Small-Angle Neutron Scattering and Light Scattering

The amount of water in therapeutic nanoparticles (NPs) is of great importance to the pharmaceutical industry, as water content reflects the volume occupied by the solid components. For example, certain biomolecules, such as mRNA, can undergo conformational change or degradation when exposed to water. Using static light scattering (SLS) and dynamic light scattering (DLS), we estimated the water content of NPs, including extruded liposomes of two different sizes and polystyrene (PS) Latex NPs. In addition, we used small-angle neutron scattering (SANS) to independently access the water content of the samples. The water content of NPs estimated by SLS/DLS was systematically higher than that from SANS. The discrepancy is most likely attributed to the larger radius determined by DLS, in contrast to the SANS-derived radius observed by SANS. However, because of low accessibility to the neutron facilities, we validate the combined SLS/DLS to be a reasonable alternative to SANS for determining the water (or solvent) content of NPs.

Computational study of DMPC liposomes loaded with the N-(2-Hydroxyphenyl)-2-propylpentanamide (HO-AAVPA) and determination of its antiproliferative activity in vitro in NIH-3T3 cells

N-(2-Hydroxyphenyl)-2-propylpentanamide (HO-AAVPA) is a valproic acid (VPA) derivative that has shown promising antiproliferative effects in different cancer cell lines, such as A204, HeLa, and MDA-MB-231. However, its low water solubility could reduce its therapeutic effectiveness. To solve this problem, in this work, we incorporated HO-AAVPA into dimyristoyl-phosphatidylcholine (DMPC) liposomes in the presence or absence of cholesterol (CHOL). Using differential scanning calorimetry (DSC), we found that the transition enthalpy (ΔH_tr) of DMPC liposomes is reduced in the presence of CHOL and/or HO-AAVPA, indicating the favorable interactions between CHOL and/or HO-AAVPA and DMPC. Further, by molecular dynamics simulations it was possible to observed that HO-AAVPA migrates from the center of the bilayer toward the water and lipid interface of the DPMC bilayer systems exposing the amine group to water and the aliphatic chain toward the interior of the bilayer. As a consequence, we observed an ordering of the lipid bilayer. Moreover, CHOL harbors into the inner bilayer membrane, increasing the order parameter of the system. The liposomal solutions loaded with HO-AAVPA were tested in the NIH3T3 cell line, showing a reduction in cell proliferation compared to those cells presented without liposomes.Communicated by Ramaswamy H. Sarma.

Efficacy optimization of low frequency microbubble-mediated sonoporation as a drug delivery platform to cancer cells

Ultrasound insonation of microbubbles can be used to form pores in cell membranes and facilitate the local trans-membrane transport of drugs and genes. An important factor in efficient delivery is the size of the delivered target compared to the generated membrane pores. Large molecule delivery remains a challenge, and can affect the resulting therapeutic outcomes. To facilitate large molecule delivery, large pores need to be formed. While ultrasound typically uses megahertz frequencies, it was recently shown that when microbubbles are excited at a frequency of 250 kHz (an order of magnitude below the resonance frequency of these agents), their oscillations are significantly enhanced as compared to the megahertz range. Here, to promote the delivery of large molecules, we suggest using this low frequency and inducing large pore formation through the high-amplitude oscillations of microbubbles. We assessed the impact of low frequency microbubble-mediated sonoporation on breast cancer cell uptake by optimizing the delivery of 4 fluorescent molecules ranging from 1.2 to 70 kDa in size. The optimal ultrasound peak negative pressure was found to be 500 kPa. Increasing the pressure did not enhance the fraction of fluorescent cells, and in fact reduced cell viability. For the smaller molecule sizes, 1.2 kDa and 4 kDa, the groups treated with an ultrasound pressure of 500 kPa and MB resulted in a fraction of 58% and 29% of fluorescent cells respectively, whereas delivery of 20 kDa and 70 kDa molecules yielded 10% and 5%, respectively. These findings suggest that low-frequency (e.g., 250 kHz) insonation of microbubbles results in high amplitude oscillation in vitro that increase the uptake of large molecules. Successful ultrasound-mediated molecule delivery requires the careful selection of insonation parameters to maximize the therapeutic effect by increasing cell uptake.

Small-Angle Neutron Scattering for Studying Lipid Bilayer Membranes

Small-angle neutron scattering (SANS) is a powerful tool for studying biological membranes and model lipid bilayer membranes. The length scales probed by SANS, being from 1 nm to over 100 nm, are well-matched to the relevant length scales of the bilayer, particularly when it is in the form of a vesicle. However, it is the ability of SANS to differentiate between isotopes of hydrogen as well as the availability of deuterium labeled lipids that truly enable SANS to reveal details of membranes that are not accessible with the use of other techniques, such as small-angle X-ray scattering. In this work, an overview of the use of SANS for studying unilamellar lipid bilayer vesicles is presented. The technique is briefly presented, and the power of selective deuteration and contrast variation methods is discussed. Approaches to modeling SANS data from unilamellar lipid bilayer vesicles are presented. Finally, recent examples are discussed. While the emphasis is on studies of unilamellar vesicles, examples of the use of SANS to study intact cells are also presented.

Characterization of lipid bilayers adsorbed to functionalized air/water interfaces

Lipid bilayers immobilized in planar geometries, such as solid-supported or "floating" bilayers, have enabled detailed studies of biological membranes with numerous experimental techniques, notably X-ray and neutron reflectometry. However, the presence of a solid support also has disadvantages as it complicates the use of spectroscopic techniques as well as surface rheological measurements that would require surface deformations. Here, in order to overcome these limitations, we investigate lipid bilayers adsorbed to inherently soft and experimentally well accessible air/water interfaces that are functionalized with Langmuir monolayers of amphiphiles. The bilayers are characterized with ellipsometry, X-ray scattering, and X-ray fluorescence. Grazing-incidence X-ray diffraction reveals that lipid bilayers in a chain-ordered state can have significantly different structural features than regular Langmuir monolayers of the same composition. Our results suggest that bilayers at air/water interfaces may be well suited for fundamental studies in the field of membrane biophysics.

The dynamical Matryoshka model: 2. Modeling of local lipid dynamics at the sub-nanosecond timescale in phospholipid membranes

Biological membranes are generally formed by lipids and proteins. Often, the membrane properties are studied through model membranes formed by phospholipids only. They are molecules composed by a hydrophilic head group and hydrophobic tails, which can present a panoply of various motions, including small localized movements of a few atoms up to the diffusion of the whole lipid or collective motions of many of them. In the past, efforts were made to measure these motions experimentally by incoherent neutron scattering and to quantify them, but with upcoming modern neutron sources and instruments, such models can now be improved. In the present work, we expose a quantitative and exhaustive study of lipid dynamics on DMPC and DMPG membranes, using the Matryoshka model recently developed by our group. The model is confronted here to experimental data collected on two different membrane samples, at three temperatures and two instruments. Despite such complexity, the model describes reliably the data and permits to extract a series of parameters. The results compare also very well to other values found in the literature.

Curcumin Accelerates the Lateral Motion of DPPC Membranes

Curcumin, the main ingredient in turmeric, has attracted attention due to its potential anti-inflammatory, anticancer, wound-healing, and antioxidant properties. Though curcumin efficacy is related to its interaction with biomembranes, there are few reports on the effects of curcumin on the lateral motion of lipids, a fundamental process in the cell membrane. Employing the quasielastic neutron scattering technique, we explore the effects of curcumin on the lateral diffusion of the dipalmotylphosphatidylcholine (DPPC) membrane. Our investigation is also supported by Fourier transform infrared spectroscopy, dynamic light scattering, and calorimetry to understand the interaction between curcumin and the DPPC membrane. It is found that curcumin significantly modulates the packing arrangement and conformations of DPPC lipid, leading to enhanced membrane dynamics. In particular, we find that the presence of curcumin substantially accelerates the DPPC lateral motion in both ordered and fluid phases. The effects are more pronounced in the ordered phase where the lateral diffusion coefficient increases by 23% in comparison to 9% in the fluid phase. Our measurements provide critical insights into molecular mechanisms underlying increased lateral diffusion. In contrast, the localized internal motions of DPPC are barely altered, except for a marginal enhancement observed in the ordered phase. In essence, these findings indicate that curcumin is favorably located at the membrane interface rather than in a transbilayer configuration. Further, the unambiguous evidence that curcumin modulates the membrane dynamics at a molecular level supports a possible action mechanism in which curcumin can act as an allosteric regulator of membrane functionality.

Bio-nano scale modifications of melittin for improving therapeutic efficacy

INTRODUCTION

Melittin (MLT), a natural membrane-active component, is the most prominent cytolytic peptide from bee venom. Remarkable biological properties of MLT, including anti-inflammatory, antimicrobial, anticancer, anti-protozoan, and antiarthritic activities, make it an up-and-coming therapeutic candidate for a wide variety of human diseases. Therapeutic applications of MLT may be hindered due to low stability, high toxicity, and weak tissue penetration. Different bio-nano scale modifications hold promise for improving its functionality and therapeutic efficacy.

AREAS COVERED

In the current review, we aimed to provide a comprehensive insight into strategies used for MLT conjugations and modifications, cellular delivery of modified forms, and their clinical perspectives by reviewing the published literature on PubMed, Scopus, and Google Scholar databases. We also emphasized the MLT structure modifications, mechanism of action, and cellular toxicity.

EXPERT OPINION

Developing new analogs and conjugates of MLT as a natural drug with improved functions and fewer side effects is crucial for the clinical translation of this approach worldwide, especially where the chemicals and synthetic drugs are more expensive or unavailable in the healthcare system. MLT-nanoconjugation may be one of the best-optimized strategies for improving peptide delivery, increasing its therapeutic efficacy, and providing minimal nonspecific cellular lytic activity. [Figure: see text].

Absorption of the [bmim][Cl] Ionic Liquid in DMPC Lipid Bilayers across Their Gel, Ripple, and Fluid Phases

Lipid bilayers are a key component of cell membranes and play a crucial role in life and in bio-nanotechnology. As a result, controlling their physicochemical properties holds the promise of effective therapeutic strategies. Ionic liquids (ILs)─a vast class of complex organic electrolytes─have shown a high degree of affinity with lipid bilayers and can be exploited in this context. However, the chemical physics of IL absorption and partitioning into lipid bilayers is yet to be fully understood. This work focuses on the absorption of the model IL [bmim][Cl] into 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid bilayers across their gel, ripple, and fluid phases. Here, by small-angle neutron scattering, we show that (i) the IL cations are absorbed in the lipid bilayer in all its thermodynamic phases and (ii) the amount of IL inserted into the lipid phase increased with increasing temperature, changing from three to four IL cations per 10 lipids with increasing temperature from 10 °C in the gel phase to 40 °C in the liquid phase, respectively. An explicative hypothesis, based on the entropy gain coming from the IL hydration water, is presented to explain the observed temperature trend. The ability to control IL absorption with temperature can be used as a handle to tune the effect of ILs on biomembranes and can be exploited in bio-nanotechnological applications.

Styrene-Maleic Acid Copolymer Nanodiscs to Determine the Shape of Membrane Proteins

Lipid nanodiscs can be used to solubilize functional membrane proteins (MPs) in nativelike environments. Thus, they are promising reagents that have been proven useful to characterize MPs. Both protein and non-protein molecular belts have shown promise to maintain the structural integrity of MPs in lipid nanodiscs. Small-angle neutron scattering (SANS) can be used to determine low-resolution structures of proteins in solution, which can be enhanced through the use of contrast variation methods. We present theoretical contrast variation SANS results for protein and styrene-maleic acid copolymer (SMA) belt 1,2-dimyristoyl-sn-glycero-3-phosphorylcholine (DMPC) nanodiscs with and without additional bound or transmembrane proteins. The predicted scattering properties are derived from atomistic molecular dynamics simulations to account for conformational fluctuations, and we determine deuterium-labeling conditions such that SANS intensity profiles only include contributions from the scattering of the MP of interest. We propose strategies to tune the neutron scattering length densities (SLDs) of the SMA and DMPC using selective deuterium labeling such that the SLD of the nanodisc becomes homogeneous and its scattering can essentially be eliminated in solvents containing an appropriate amount of D₂O. These finely tuned labeled polymer-based nanodiscs are expected to be useful to extract the size and molecular shape information of MPs using SANS-based contrast variation experiments, and they can be used with MPs of any molecular weight.

Raman Microscopy Investigation of GLP-1 Peptide Association with Supported Phospholipid Bilayers

A wide range of important biological processes occur at phospholipid membranes including cell signaling, where a peptide or small molecule targets a membrane-localized receptor protein. In this work, we report the adaptation of confocal Raman microscopy to quantify populations of unlabeled glucagon-like peptide-1 (GLP-1), a membrane-active 30-residue incretin peptide, in supported phospholipid bilayers deposited on the interior surfaces of wide-pore porous silica particles. Quantification of lipid bilayer-associated peptide is achieved by measuring the Raman scattering intensity of the peptide relative to that of the supported lipid bilayer, which serves as an internal standard. The dependence of the bilayer-associated GLP-1 population on the solution concentration of GLP-1 produces an isotherm used to determine the equilibrium constant for peptide-bilayer association and the maximum peptide surface coverage. The maximum coverage of GLP-1 in the lipid bilayer was found to be only 1/5th of a full monolayer based on its hydrodynamic radius. The saturation coverage, therefore, is not limited by the size of GLP-1 but by the ability of the bilayer to accommodate the peptide at high concentrations within the bilayer. Raman spectra show that GLP-1 association with the supported bilayer is accompanied by structural changes consistent with the intercalation of the peptide into the bilayer, where the observed increase in acyl-chain order would increase the lipid density and provide free volume needed to accommodate the peptide. These results were compared with previous measurements of the association of fluorescently labeled GLP-1 with a planar-supported bilayer; the unlabeled peptide exhibits a 3-fold greater affinity for the lipid bilayer on the porous silica support, suggesting that the fluorescent label alters the GLP-1 lipid bilayer association.

Stable DOPG/Glycyrrhizin Vesicles with a Wide Range of Mixing Ratios: Structure and Stability as Seen by Scattering Experiments and Cryo-TEM

Phosphatidylglycerols represent a large share of the lipids in the plasmamembrane of procaryotes. Therefore, this study investigates the role of charged lipids in the plasma membrane with respect to the interaction of the antiviral saponin glycyrrhizin with such membranes. Glycyrrhizin is a natural triterpenic-based surfactant found in licorice. Vesicles made of 1,2-dioleoyl-sn-glycero-3-phospho-rac-(1’-glycerol) (DOPG)/glycyrrhizin are characterized by small-angle scattering with neutrons and X-rays (SANS and SAXS). Small-angle scattering data are first evaluated by the model-independent modified Kratky–Porod method and afterwards fitted by a model describing the shape of small unilamellar vesicles (SUV) with an internal head-tail contrast. Complete miscibility of DOPG and glycyrrhizin was revealed even at a ratio of lipid:saponin of 1:1. Additional information about the chain-chain correlation distance of the lipid/saponin mixtures in the SUV structures is obtained from wide-angle X-ray scattering (WAXS).

A quantitative determination of lipid bilayer deposition efficiency using AFM

The efficacy of a number of different methods for depositing a dimyristoylphosphatidylcholine (DMPC) lipid bilayer or DMPC-cholesterol (3 : 1) mixed bilayer onto a silicon substrate has been investigated in a quantitative manner using atomic force microscopy (AFM) image analysis to extract surface coverage. Complementary AFM-IR measurements were used to confirm the presence of the lipids. For the Langmuir-Blodgett/Schaefer deposition method at temperatures below the chain-melting transition temperature (T m), a large number of bilayer defects resulted when DMPC was deposited from a water subphase. Addition of calcium ions to the trough led to smaller, more frequent defects, whereas addition of cholesterol to the lipid mixture led to a vast improvement in bilayer coverage. Poor coverage was achieved for deposition at temperatures above T m. Formation of the deposited bilayer from vesicle fusion proved a more reliable method for all systems, with formation of near-complete bilayers within 60 seconds at temperatures above T m, although this method led to a higher probability of multilayer formation and rougher bilayer surfaces.

Insight into the Mechanism of Action and Peptide-Membrane Interactions of Aib-Rich Peptides: Multitechnique Experimental and Theoretical Analysis

The increase in resistant bacterial strains necessitates the identification of new antimicrobial molecules. Antimicrobial peptides (AMPs) are an attractive option because of evidence that bacteria cannot easily develop resistance to AMPs. The peptaibols, a class of naturally occurring AMPs, have shown particular promise as antimicrobial drugs, but their development has been hindered by their mechanism of action not being clearly understood. To explore how peptaibols might interact with membranes, circular dichroism, vibrational circular dichroism, linear dichroism, Raman spectroscopy, Raman optical activity, neutron reflectivity and molecular dynamics simulations have been used to study a small library of peptaibol mimics, the Aib-rich peptides. All the peptides studied quickly partitioned and oriented in membranes, and we found evidence of chiral interactions between the phospholipids and membrane-embedded peptides. The protocols presented in this paper open new ground by showing how chiro-optical spectroscopies can throw light on the mechanism of action of AMPs.

Photogenerated Radical Pair between Flavin and a Tryptophan-Containing Transmembrane-Type Peptide in a Large Unilamellar Vesicle

Electron-transfer (ET) reactions in biological systems, such as those with magnetic sensors based on flavoproteins and electron transport at biomembrane interfaces, are interesting and important issues that require understanding. As a model system of flavoproteins in biomimetic environments, we report the dynamics of the radical pair generated by photoinduced ET between riboflavin tetrabutylate (RFTB) and tryptophan (Trp) residues in a transmembrane-type polypeptide, both of which are distributed in a large unilamellar vesicle of 1,2-dimyristoyl-sn-glycero-3-phosphocholine. The Trp residues locate near the hydrophilic membrane interface, as confirmed by a dual-fluorescence quenching assay. The fluorescence and transient absorption upon photoexcitation of RFTB indicate that ET from both the singlet and triplet excited states occurs at the hydrophilic interface, whereas the RFTB in the hydrophobic region does not contribute to ET. The ET efficiency and the magnetic field effect (MFE) on the RFTB anion increase significantly above the gel-to-liquid crystal phase transition temperature due to a decrease in microviscosity. The MFE analysis indicates that the radical pair generated from the triplet ET channel exhibits a long lifetime as those in micellar systems due to the strong cage effect of the vesicle.

Microscopic Interactions of Melatonin, Serotonin and Tryptophan with Zwitterionic Phospholipid Membranes

The interactions at the atomic level between small molecules and the main components of cellular plasma membranes are crucial for elucidating the mechanisms allowing for the entrance of such small species inside the cell. We have performed molecular dynamics and metadynamics simulations of tryptophan, serotonin, and melatonin at the interface of zwitterionic phospholipid bilayers. In this work, we will review recent computer simulation developments and report microscopic properties, such as the area per lipid and thickness of the membranes, atomic radial distribution functions, angular orientations, and free energy landscapes of small molecule binding to the membrane. Cholesterol affects the behaviour of the small molecules, which are mainly buried in the interfacial regions. We have observed a competition between the binding of small molecules to phospholipids and cholesterol through lipidic hydrogen-bonds. Free energy barriers that are associated to translational and orientational changes of melatonin have been found to be between 10-20 kJ/mol for distances of 1 nm between melatonin and the center of the membrane. Corresponding barriers for tryptophan and serotonin that are obtained from reversible work methods are of the order of 10 kJ/mol and reveal strong hydrogen bonding between such species and specific phospholipid sites. The diffusion of tryptophan and melatonin is of the order of 10-7 cm2/s for the cholesterol-free and cholesterol-rich setups.

Cation-Zwitterionic Lipid Interactions Are Affected by the Lateral Area per Lipid

Interactions of the divalent cations Ca²⁺ and Mg²⁺ with the zwitterionic lipid bilayers prepared of a fully saturated dipalmitoylphosphatidylcholine (DPPC) or a di-monounsaturated dioleoylphosphatidylcholine (DOPC) were studied by using the neutron scattering methods and molecular dynamics simulations. The effect on the bilayer structural properties confirms the direct interactions in all cases studied. The changes are observed in the bilayer thickness and lateral area. The extent of these structural changes, moreover, suggests various mechanisms of the cation-lipid interactions. First, we have observed a small difference when studying DPPC bilayers in the gel and fluid phases, with somewhat larger effects in the former case. Second, the hydration proved to be a factor in the case of DOPC bilayers, with the larger effects in the case of less hydrated systems. Most importantly, however, there was a qualitative difference between the results of the fully hydrated DOPC bilayers and the others examined. These observations then prompt us to suggest an interaction model that is plausibly governed by the lateral area of lipid, though affected indirectly also by the hydration level. Namely, when the interlipid distance is small enough to allow for the multiple lipid-ion interactions, the lipid-ion-lipid bridges are formed. The bridges impose strong attractions that increase the order of lipid hydrocarbon chains, resulting in the bilayer thickening. In the other case, when the interlipid distance extends beyond a limiting length corresponding to the area per lipid of ∼65 Ų, Mg²⁺ and Ca²⁺ continue to interact with the lipid groups by forming the separate ion-lipid pairs. As the interactions proposed affect the lipid membrane structure in the lateral direction, they may prove to play their role in other mechanisms lying within the membrane multicomponent systems and regulating for example the lipid-peptide-ion interactions.

Optimization of Slipids Force Field Parameters Describing Headgroups of Phospholipids

The molecular mechanics force field Slipids developed in a series of works by Jämbeck and Lyubartsev (J. Phys. Chem. B 2012, 116, 3164-3179; J. Chem. Theory Comput. 2012, 8, 2938-2948) generally provides a good description of various lipid bilayer systems. However, it was also found that order parameters of C-H bonds in the glycerol moiety of the phosphatidylcholine headgroup deviate significantly from NMR results. In this work, the dihedral force field parameters have been reparameterized in order to improve the agreement with experiment. For this purpose, we have computed energies for a large amount of lipid headgroup conformations using density functional theory on the B3P86/cc-pvqz level and optimized dihedral angle parameters simultaneously to provide the best fit to the quantum chemical energies. The new parameter set was validated for three lipid bilayer systems against a number of experimental properties including order parameters, area per lipid, scattering form factors, bilayer thickness, area compressibility and lateral diffusion coefficients. In addition, the order parameter dependence on cholesterol content in the POPC bilayer was investigated. It is shown that the new force field significantly improves agreement with the experimental order parameters for the lipid headgroup while keeping good agreement with other experimentally measured properties.

A general approach to maximise information density in neutron reflectometry analysis

Neutron and x-ray reflectometry are powerful techniques facilitating the study of the structure of interfacial materials. The analysis of these techniques is ill-posed in nature requiring the application of model-dependent methods. This can lead to the over- and under- analysis of experimental data when too many or too few parameters are allowed to vary in the model. In this work, we outline a robust and generic framework for the determination of the set of free parameters that are capable of maximising the information density of the model. This framework involves the determination of the Bayesian evidence for each permutation of free parameters; and is applied to a simple phospholipid monolayer. We believe this framework should become an important component in reflectometry data analysis and hope others more regularly consider the relative evidence for their analytical models.

Revising the mechanism of p75NTR activation: intrinsically monomeric state of death domains invokes the "helper" hypothesis

The neurotrophin receptor p75NTR plays crucial roles in neuron development and regulates important neuronal processes like degeneration, apoptosis and cell survival. At the same time the detailed mechanism of signal transduction is unclear. One of the main hypotheses known as the snail-tong mechanism assumes that in the inactive state, the death domains interact with each other and in response to ligand binding there is a conformational change leading to their exposure. Here, we show that neither rat nor human p75NTR death domains homodimerize in solution. Moreover, there is no interaction between the death domains in a more native context: the dimerization of transmembrane domains in liposomes and the presence of activating mutation in extracellular juxtamembrane region do not lead to intracellular domain interaction. These findings suggest that the activation mechanism of p75NTR should be revised. Thus, we propose a novel model of p75NTR functioning based on interaction with "helper" protein.

Thermoresponsive Polysaccharide Graft Polymer Vesicles with Tunable Size and Structural Memory

Controlling polymer vesicle size is difficult and a major obstacle for their potential use in biomedical applications, such as drug-delivery carriers and nanoreactors. Herein, we report size-tunable polymer vesicles based on self-assembly of a thermoresponsive amphiphilic graft copolymer. Unilamellar polymer vesicles form upon heating chilled polymer solutions, and vesicle size can be tuned in the range of 40-70 nm by adjusting the initial polymer concentration. Notably, the polymer can reversibly switch between a monomer state and a vesicle state in accordance with a cooling/heating cycle, which changes neither the size nor the size distribution of the vesicles. This lack of change suggests that the polymer memorizes a particular vesicle conformation. Given our vesicles' size tunability and structural memory, our research considerably expands the fundamental and practical scope of thermoresponsive amphiphilic graft copolymers and renders amphiphilic graft copolymers useful tools for synthesizing functional self-assembled materials.

Confocal Raman Microscopy Investigation of Phospholipid Monolayers Deposited on Nitrile-Modified Surfaces in Porous Silica Particles

Phospholipid bilayers deposited on a variety of surfaces provide models for investigation of the lipid membrane structure and supports for biocompatible sensors. Hybrid-supported phospholipid bilayers (HSLBs) are stable membrane models for these investigations, typically prepared by self-assembly of a lipid monolayer over an n-alkane-modified surface. HSLBs have been prepared on n-alkyl chain-modified silica and used for lipophilicity-based chromatographic separations. The structure of these hybrid bilayers differs from vesicle membranes where the lipid head group spacing is greater due to interdigitation of the lipid acyl chains with the underlying n-alkyl chains bound to the silica surface. This interdigitated structure exhibits a broader melting transition at a higher temperature due to strong interactions between the lipid acyl chains and the immobile n-alkyl chains bound to silica. In the present work, we seek to reduce the interactions between a lipid monolayer and its supporting substrate by self-assembly of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on porous silica functionalized with nitrile-terminated surface ligands. The frequency of Raman scattering of the surface -C≡N stretching mode at the lipid-nitrile interface is consistent with an n-alkane-like environment and insensitive to lipid head group charge, indicating that the lipid acyl chains are in contact with the surface nitrile groups. The head group area of this lipid monolayer was determined from the within-particle phospholipid concentration and silica specific surface area and found to be 54 ± 2 Ų, equivalent to the head group area of a DMPC vesicle bilayer. The structure of these nitrile-supported phospholipid monolayers was characterized below and above their melting transition by confocal Raman microscopy and found to be nearly identical to DMPC vesicle bilayers. Their narrow gel-to-fluid-phase melting transition is equivalent to dispersed DMPC vesicles, suggesting that the acyl chain structure on the nitrile support mimics the outer leaflet structure of a vesicle membrane.

Adsorption of a styrene maleic acid (SMA) copolymer-stabilized phospholipid nanodisc on a solid-supported planar lipid bilayer

Over recent years, there has been a rapid development of membrane-mimetic systems to encapsulate and stabilize planar segments of phospholipid bilayers in solution. One such system has been the use of amphipathic copolymers to solubilize lipid bilayers into nanodiscs. The attractiveness of this system, in part, stems from the capability of these polymers to solubilize membrane proteins directly from the host cell membrane. The assumption has been that the native lipid annulus remains intact, with nanodiscs providing a snapshot of the lipid environment. Recent studies have provided evidence that phospholipids can exchange from the nanodiscs with either lipids at interfaces, or with other nanodiscs in bulk solution. Here we investigate kinetics of lipid exchange between three recently studied polymer-stabilized nanodiscs and supported lipid bilayers at the silicon-water interface. We show that lipid and polymer exchange occurs in all nanodiscs tested, although the rate and extent differs between different nanodisc types. Furthermore, we observe adsorption of nanodiscs to the supported lipid bilayer for one nanodisc system which used a polymer made using reversible addition-fragmentation chain transfer polymerization. These results have important implications in applications of polymer-stabilized nanodiscs, such as in the fabrication of solid-supported films containing membrane proteins.

Neutral Diclofenac Causes Remarkable Changes in Phosphatidylcholine Bilayers: Relevance for Gastric Toxicity Mechanisms

The main objective of this study was to clarify the topical mechanisms underlying diclofenac-induced gastric toxicity by considering for the first time both ionization states of this nonsteroidal anti-inflammatory drug. 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) liposomes were the model system chosen to mimic the protective phospholipid layers of the gastric mucosa and to describe the interactions with diclofenac, considering the pH gradient found in the gastric mucosa (3 < pH < 7.4). Complementary experimental techniques were combined to evaluate the drug's affinity for DMPC bilayers, as well as to assess the drug's effects on the structural properties of the phospholipid bilayer. The diclofenac-DMPC interactions were clearly dependent on the drug's ionization state. Neutral diclofenac displayed greater affinity for DMPC bilayers than anionic diclofenac. Moreover, the protonated/neutral form of the drug induced more pronounced and/or distinct alterations in the structure of the DMPC bilayer than the deprotonated/ionized form, considering similar membrane concentrations. Therefore, neutral diclofenac-induced changes in the structural properties of the external phospholipid layers of the gastric mucosa may constitute an additional toxicity mechanism of this worldwide-used drug, which shall be considered for the development of safer therapeutic strategies. SIGNIFICANCE STATEMENT: Neutral or anionic diclofenac exerted distinct alterations in phosphatidylcholine bilayers, which are used in this work as models for the protective phospholipid layers of the gastric mucosa. Remarkable changes were induced by neutral diclofenac in the structural properties of the phospholipid bilayer, suggesting that both ionized and neutral states of nonsteroidal anti-inflammatory drugs must be considered to clarify their mechanisms of toxicity and to ultimately develop safer anti-inflammatory drugs.

Aescin-Induced Conversion of Gel-Phase Lipid Membranes into Bicelle-like Lipid Nanoparticles

Mixtures of the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and the saponin β-aescin spontaneously form monodisperse, bilayered discoidal micelles (also known as "bicelles" or "nanodisks") in aqueous solution. Such bicelles form below the melting temperature of DMPC when the phospholipids are in the rigid L_β' state and are precursors of spontaneously formed vesicles. The aescin concentration must be far above the cmc_aescin (≈0.3-0.4 mM). It was found that the shape and size of the bicelles are tunable by composition. High amounts of aescin decrease the size of the bicelles from diameters of ∼300 Å at 7 mol % to ∼120 Å at 30 mol % β-aescin. The structures are scrutinized by complementary small-angle X-ray and neutron scattering experiments. The scattering curves are subsequently analyzed by a model-independent (indirect Fourier transform analysis) and a model-based approach where bicelles are described as polydisperse bilayer disks encircled by a β-aescin rim. Moreover, the monomodal distribution and low polydispersity of the samples were confirmed by photon correlation spectroscopy. The discoidal structures were visualized by transmission electron microscopy.

Occupancy distributions of membrane proteins in heterogeneous liposome populations

Studies of membrane protein structure and function often rely on reconstituting the protein into lipid bilayers through the formation of liposomes. Many measurements conducted in proteoliposomes, e.g. transport rates, single-molecule dynamics, monomer-oligomer equilibrium, require some understanding of the occupancy statistics of the liposome population for correct interpretation of the results. In homogenous liposomes, this is easy to calculate as the act of protein incorporation can be described by the Poisson distribution. However, in reality, liposomes are heterogeneous, which alters the statistics of occupancy in several ways. Here, we determine the liposome occupancy distribution for membrane protein reconstitution while considering liposome size heterogeneity. We calculate the protein occupancy for a homogenous population of liposomes with radius r = 200 nm, representing an idealization of vesicles extruded through 400 nm pores and compare it to the right-skewed distribution of 400 nm 2:1 POPE:POPG vesicles. As is the case for E. coli polar lipids, this synthetic composition yields a sub-population of small liposomes, 25-30 nm in radius with a long tail of larger vesicles. Previously published microscopy data of the co-localization of the CLC-ec1 Cl^-/H⁺ transporter with liposomes, and vesicle occupancy measurements using functional transport assays, shows agreement with the heterogeneous 2:1 POPE:POPG population. Next, distributions of 100 nm and 30 nm extruded 2:1 POPE:POPG liposomes are measured by cryo-electron microscopy, demonstrating that extrusion through smaller pores does not shift the peak, but reduces polydispersity arising from large liposomes. Single-molecule photobleaching analysis of CLC-ec1-Cy5 shows the 30 nm extruded population increases the 'Poisson-dilution' range, reducing the probability of vesicles with more than one protein at higher protein/lipid densities. These results demonstrate that the occupancy distributions of membrane proteins into vesicles can be accurately predicted in heterogeneous populations with experimental knowledge of the liposome size distribution. This article is part of a Special Issue entitled: Molecular biophysics of membranes and membrane proteins.

Nano-viscosimetry analysis of the membrane disrupting action of the bee venom peptide melittin

Melittin is one of the most studied α-helical cationic membrane disrupting peptides. It is the main component of bee venom, however it is considered an antimicrobial peptide for its ability to kill bacteria. Melittin is believed to act by opening large toroidal pores in the plasma membrane of the targeted cells/bacteria, although this is questioned by some authors. Little is known, however, about the molecular mechanism leading to this activity. In this study the mechanism of action of melittin was studied by dye leakage and quartz crystal microbalance fingerprinting analysis in biomimetic model membranes. The results revealed the existence of multiple stages in the membrane disrupting action with characteristic differences between different membrane types. In bacterial-mimetic (charged) lipid mixtures the viscoelastic fingerprints suggest a surface-acting mechanism, whereas in mammalian-mimetic (neutral) membranes melittin appears to penetrate the bilayer already at low concentrations. In domain-forming mixed membranes melittin shows a preference for the domain containing predominantly zwitterionic lipids. The results confirm membrane poration but are inconsistent with the insertion-to-toroidal pore pathway. Therefore hypotheses of the two membrane disrupting pathways were developed, describing the membrane disruption as either surface tension modulation leading to toroidal pore formation, or linear aggregation leading to fissure formation in the membrane.

Understanding the Dynamic Behavior of an Anticancer Drug, Doxorubicin, on a Lipid Membrane Using Multiple Spectroscopic Techniques

The interaction, including the adsorption and embedding, of a widely applied anticancer drug, doxorubicin, with a lipid membrane was investigated. Second harmonic generation and two photon fluorescence were used as a powerful combination capable in revealing this dynamic process at the interface. The adsorption, association, deassociation and embedding of doxorubicin on the lipid membrane were clearly identified based on the consistency in the dynamic parameters revealed by the time dependent second harmonic generation and two-photon fluorescence measurements. This work also presents a new approach for in situ measurement of the adsorption density of doxorubicin on lipid membrane, benefiting from the two-photon fluorescence signal of doxorubicin being significantly altered by its chemical environment. The analysis of the location and molecular density based on the fluorescent efficiency of the chromophores makes the fluorescence measurement a "surface sensitive" technique as well. The analytical procedures used in this work are expected to aid in understanding the interaction between fluorescent molecules and lipid membranes in general.

Effect of temperature and hydrophilic ratio on the structure of poly(N-vinylcaprolactam)-block-poly(dimethylsiloxane)-block-poly(N-vinylcaprolactam) polymersomes

Nanosized polymeric vesicles (polymersomes) assembled from ABA triblock copolymers of poly(N-vinylcaprolactam)-poly(dimethylsiloxane)-poly(N-vinylcaprolactam) (PVCL-PDMS-PVCL) are a promising platform for biomedical applications, as the temperature-responsiveness of the PVCL blocks enables reversible vesicle shrinkage and permeability of the polymersome shell at elevated temperatures. Herein, we explore the effects of molecular weight, polymer block weight ratios, and temperature on the structure of these polymersomes via electron microscopy, dynamic light scattering, small angle neutron scattering (SANS), and all-atom molecular dynamic methods. We show that the shell structure and overall size of the polymersome can be tuned by varying the hydrophilic (PVCL) weight fraction of the polymer: at room temperature, polymers of smaller hydrophilic ratios form larger vesicles that have thinner shells, whereas polymers with higher PVCL content exhibit interchain aggregation of PVCL blocks within the polymersome shell above 50 °C. Model fitting and model-free analysis of the SANS data reveals that increasing the mass ratio of PVCL to the total copolymer weight from 0.3 to 0.56 reduces the temperature-induced change in vesicle diameter by a factor of 3 while simultaneously increasing the change in shell thickness by a factor of 1.5. Finally, by analysis of the shell structures and overall size of polymersomes with various PVCL weight ratios and those without temperature-dependent polymer components, we bring into focus the mechanism of temperature-triggered drug release reported in a previous study. This work provides new fundamental perspectives on temperature-responsive polymersomes and elucidates important structure-property relationships of their constituent polymers.

Shape and Phase Transitions in a PEGylated Phospholipid System

Poly(ethylene glycol) (PEG) polymers and PEG-conjugated lipids are widely used in bioengineering and drug transport applications. A PEG layer in a drug carrier increases hydrophilic repulsion, inhibits membrane fusion and serum opsonin interactions, and prolongs the storage and circulation time. It can also change the carrier shape and have an influence on many properties related to the content release of the carrier. In this paper, we focus on the physicochemical effects of PEGylation in the lipid bilayer. We introduce laurdanC as a fluorophore for shape recognition and phase transition detection. Together with laurdanC, cryogenic transmission electron microscopy, differential scanning calorimetry, molecular dynamics simulations, and small-angle X-ray scattering/wide-angle X-ray scattering, we acquire information of the particle/bilayer morphology and phase behavior in systems containing 1,2-dipalmitoyl- sn-glycero-3-phosphocholine:1,2-distearoyl- sn-glycero-3-phosphoethanolamine-PEG(2000) with different fractions. We find that PEGylation leads to two important and potentially usable features of the system. (1) Spherical vesicles present a window of elevated chain-melting temperatures and (2) lipid packing shape-controlled liposome-to-bicelle transition. The first finding is significant for targets requiring multiple release sequences and the second enables tuning the release by composition and the PEG polymer length. Besides drug delivery systems, the findings can be used in other smart soft materials with trigger-polymers as well.

Bayesian determination of the effect of a deep eutectic solvent on the structure of lipid monolayers

A novel reflectometry analysis method reveals the structure of lipid monolayers at the air-DES interface.

Lipopeptisomes: Anticancer peptide-assembled particles for fusolytic oncotherapy

Anticancer peptides (ACPs) are cationic amphiphiles that preferentially kill cancer cells through folding-dependent membrane disruption. Although ACPs represent attractive therapeutic candidates, particularly against drug-resistant cancers, their successful translation into clinical practice has gone unrealized due to their poor bioavailability, serum instability and, most importantly, severe hemolytic toxicity. Here, we exploit the membrane-specific interactions of ACPs to prepare a new class of peptide-lipid particle, we term a lipopeptisome (LP). This design sequesters loaded ACPs within a lipid lamellar corona to avoid contact with red blood cells and healthy tissues, while affording potent lytic destruction of cancer cells following LP-membrane fusion. Biophysical studies show ACPs rapidly fold at, and integrate into, liposomal membranes to form stable LPs with high loading efficiencies (>80%). Rational design of the particles to possess lipid combinations mimicking that of the aberrant cancer cell outer leaflet allows LPs to rapidly fuse with tumor cell membranes and afford localized assembly of loaded ACPs within the bilayer. This leads to preferential fusolytic killing of cancer cells with minimal collateral toxicity towards non-cancerous cells and erythrocytes, thereby imparting clinically relevant therapeutic indices to otherwise toxic ACPs. Thus, integration of ACPs into self-assembled LPs represents a new delivery strategy to improve the therapeutic utility of oncolytic agents, and suggests this technology may be added to targeted combinatorial approaches in precision medicine. STATEMENT OF SIGNIFICANCE: Despite their significant clinical potential, the therapeutic utility of many ACPs has been limited by their collateral hemolysis during administration. Leveraging the membrane-specific interactions of ACPs, here we prepare self-assembled peptide-lipid nanoparticles, or 'lipopeptisomes' (LPs), capable of preferentially fusing with and lysing cancer cell membranes. Key to this fusolytic action is the construction of LPs from lipids simulating the cancer cell outer leaflet. This design recruits the oncolytic peptide payload into the carrier lamella and allows for selective destruction of cancer cells without disrupting healthy cells. Consequently, LPs impart clinically relevant therapeutic indexes to previously toxic ACPs, and thus open new opportunities to improve the clinical translation of oncolytics challenged by narrow therapeutic windows.

An acid-compatible co-polymer for the solubilization of membranes and proteins into lipid bilayer-containing nanoparticles

The fundamental importance of membrane proteins in drug discovery has meant that membrane mimetic systems for studying membrane proteins are of increasing interest. One such system has been the amphipathic, negatively charged poly(styrene-co-maleic acid) (SMA) polymer to form "SMA Lipid Particles" (SMALPs) which have been widely adopted to solubilize membrane proteins directly from the cell membrane. However, SMALPs are only soluble under basic conditions and precipitate in the presence of divalent cations required for many downstream applications. Here, we show that the positively charged poly(styrene-co-maleimide) (SMI) forms similar nanoparticles with comparable efficiency to SMA, whilst remaining functional at acidic pH and compatible with high concentrations of divalent cations. We have performed a detailed characterization of the performance of SMI that enables a direct comparison with similar data published for SMA. We also demonstrate that SMI is capable of extracting proteins directly from the cell membrane and can solubilize functional human G-protein coupled receptors (GPCRs) expressed in cultured HEK 293T cells. "SMILPs" thus provide an alternative membrane solubilization method that successfully overcomes some of the limitations of the SMALP method.

Acemetacin–phosphatidylcholine interactions are determined by the drug ionization state

Complementary biophysical techniques depicted the differential effects of acemetacin ionic forms on phosphatidylcholine bilayers.

Antimicrobial Peptides Share a Common Interaction Driven by Membrane Line Tension Reduction

Antimicrobial peptides (AMPs) are a class of host-defense molecules that neutralize a broad range of pathogens. Their membrane-permeabilizing behavior has been commonly attributed to the formation of pores; however, with the continuing discovery of AMPs, many are uncharacterized and their exact mechanism remains unknown. Using atomic force microscopy, we previously characterized the disruption of model membranes by protegrin-1 (PG-1), a cationic AMP from pig leukocytes. When incubated with zwitterionic membranes of dimyristoylphosphocholine, PG-1 first induced edge instability at low concentrations, then porous defects at intermediate concentrations, and finally worm-like micelle structures at high concentrations. These rich structural changes suggested that pore formation constitutes only an intermediate state along the route of PG-1's membrane disruption process. The formation of these structures could be best understood by using a mesophase framework of a binary mixture of lipids and peptides, where PG-1 acts as a line-active agent in lowering interfacial bilayer tensions. We have proposed that rather than being static pore formers, AMPs share a common ability to lower interfacial tensions that promote membrane transformations. In a study of 13 different AMPs, we found that peptide line-active behavior was not driven by the overall charge, and instead was correlated with their adoption of imperfect secondary structures. These peptide structures commonly positioned charged residues near the membrane interface to promote deformation favorable for their incorporation into the membrane. Uniquely, the data showed that barrel-stave-forming peptides such as alamethicin are not line-active, and that the seemingly disparate models of toroidal pores and carpet activity are actually related. We speculate that this interplay between peptide structure and the distribution of polar residues in relation to the membrane governs AMP line activity in general and represents a novel, to our knowledge, avenue for the rational design of new drugs.

Effect of protic ionic liquid nanostructure on phospholipid vesicle formation

The formation of bilayer-based lyotropic liquid crystals and vesicle dispersions by phospholipids in a range of protic ionic liquids has been investigated by polarizing optical microscopy using isothermal penetration scans, differential scanning calorimetry, and small angle X-ray and neutron scattering. The stability and structure of both lamellar phases and vesicle dispersions is found to depend primarily on the underlying amphiphilic nanostructure of the ionic liquid itself. This finding has significant implications for the use of ionic liquids in soft and biological materials and for biopreservation, and demonstrates how vesicle structure and properties can be controlled through selection of cation and anion. For a given ionic liquid, systematic trends in bilayer thickness, chain-melting temperature and enthalpy increase with phospholipid acyl chain length, paralleling behaviour in aqueous systems.

Evidence of Lipid Exchange in Styrene Maleic Acid Lipid Particle (SMALP) Nanodisc Systems

Styrene-alt-maleic acid lipid particles (SMALPs) are self-assembled discoidal structures composed of a polymer belt and a segment of lipid bilayer, which are capable of encapsulating membrane proteins directly from the cell membrane. Here we present evidence of the exchange of lipids between such "nanodiscs" and lipid monolayers adsorbed at either solid-liquid or air-liquid interfaces. This behavior has important implications for the potential uses of nanodiscs.

On the Structural and Dynamical Properties of DOPC Reverse Micelles

The structure and dynamics of phospholipid reverse micelles are studied by molecular dynamics. We report all-atom unconstrained simulations of 1,2-dioleoyl-sn-phosphatidylcholine (DOPC) reverse micelles in benzene of increasing sizes, with water-to-surfactant number ratios ranging from W₀ = 1 to 16. The aggregation number, i.e., the number of DOPC molecules per reverse micelle, is determined to fit experimental light-scattering measurements of the reverse micelle diameter. The simulated reverse micelles are found to be approximately spherical. Larger reverse micelles (W₀ > 4) exhibit a layered structure with a water core and the hydration structure of DOPC phosphate head groups is similar to that found in phospholipid membranes. In contrast, the structure of smaller reverse micelles (W₀ ≤ 4) cannot be described as a series of concentric layers successively containing water, surfactant head groups, and surfactant tails, and the head groups are only partly hydrated and frequently present in the core. The dynamics of water molecules within the phospholipid reverse micelles slow down as the reverse micelle size decreases, in agreement with prior studies on AOT and Igepal reverse micelles. However, the average water reorientation dynamics in DOPC reverse micelles is found to be much slower than in AOT and Igepal reverse micelles with the same W₀ ratio. This is explained by the smaller water pool and by the stronger interactions between water and the charged head groups, as confirmed by the red-shift of the computed infrared line shape with decreasing W₀.