Non-contact elastography methods in mechanobiology: a point of view

Contact-free characterization of nuclear mechanics using correlative Brillouin-Raman Micro-Spectroscopy in living cells

Nuclear mechanics is a key parameter in regulating cell physiology, affecting chromatin accessibility and transcriptional regulation. The most established method to characterize the mechanics of biological materials at the sub-micrometer scale is based on atomic force microscopy (AFM). However, its contact-based nature limits the direct access to the nucleus. While some indirect methods have been proposed to measure nuclear mechanics in living cells, the readout is influenced by the overlaying cytoskeleton. For this reason, mechanical measurements on isolated nuclei are a common strategy to overcome this issue. However, the impact of the invasive preparation procedure on the measured properties is still unclear. To address this issue, we studied the mechanical properties of skin fibroblasts probing the nuclear region and of extracted nuclei using AFM and correlative Brillouin-Raman Micro-Spectroscopy (BRMS). The latter technique is a non-invasive method to image living systems in 3D, obtaining correlative information on the mechanical and chemical properties of the sample at specific points of interest. Using this approach, we demonstrated that extracted nuclei are significantly softer than intact ones. Moreover, we demonstrated the ability of BRMS to highlight mechanical features within living cells that were masked by the convolution with the cytosol in conventional AFM measurements. Overall, this study shows the importance of evaluating nuclear mechanics within the native environment where cellular homeostasis is preserved. We, therefore, suggest that BRMS offers a much deeper insight into nuclear mechanics compared to AFM, and it should be adopted as a reference tool to study nuclear mechanobiology. STATEMENT OF SIGNIFICANCE: The cell nucleus, the largest eukaryotic organelle, is crucial for cellular function and genetic material storage. Its mechanical properties, often altered in disease, influence key processes like chromatin accessibility. Although atomic force microscopy (AFM) is a standard method for studying nuclear mechanics, isolating nuclear stiffness in living cells is challenging due to interference from the cytoskeleton and plasma membrane. We demonstrate that correlative Brillouin-Raman Micro-Spectroscopy (BRMS) enables non-contact, high-resolution measurement of nuclear mechanics, capturing sub-micron details. We compare the results from BRMS with that obtained on the same samples with AFM. BRMS enhances our understanding of nuclear stiffness in physiological conditions, offering valuable insights for researchers in the field of mechanobiology, biotechnology, medicine, and bioengineering.

Silver Nanoparticles and Simvastatin-Loaded PLGA-Coated Hydroxyapatite/Calcium Carbonate Scaffolds

The need to develop synthetic bone substitutes with structures, properties, and functions similar to bone and capable of preventing microbial infections is still an ongoing challenge. This research is focused on the preparation and characterization of three-dimensional porous scaffolds based on hydroxyapatite (HA)-functionalized calcium carbonate loaded with silver nanoparticles and simvastatin (SIMV). The scaffolds were prepared using the foam replica method, with a polyurethane (PU) sponge as a template, followed by successive polymer removal and sintering. The scaffolds were then coated with poly(lactic-co-glycolic) acid (PLGA) to improve mechanical properties and structural integrity, and loaded with silver nanoparticles and SIMV. The scaffolds were characterized by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), ATR FT-IR, and silver and SIMV loading. Moreover, the samples were analyzed by Brillouin and Raman microscopy. Finally, in vitro bioactivity, SIMV and silver release, and antimicrobial activity against Staphylococcus aureus and Staphylococcus epidermidis were evaluated. From the Brillouin spectra, samples showed characteristics analogous to those of bone tissue. They exhibited new hydroxyapatite growth, as evidenced by SEM, and good antimicrobial activity against the tested bacteria. In conclusion, the obtained results demonstrate the potential of the scaffolds for application in bone repair.

Tissue histology on the correlation between fracture energy and elasticity

PURPOSE

Preemptively estimating tissue damage is crucial for a safe surgical procedure. We previously investigated the possibility of estimating the fracture energies of biological tissues based on their elasticities. However, the reason behind the presence of these correlations is poorly understood. In this study, we investigate the effect of a tissue's histology on the correlation between the fracture energy and elasticity. We hypothesize that two tissues with similar fibrous structure will show a similar correlation between the fracture energy and elasticity.

METHODS

Porcine duodenum were used for this study. Two tensile tests were performed for each porcine duodenum specimen to determine its elasticity and tearing energy. The correlation between fracture energy and elasticity was then investigated using the results from the mechanical tests. Furthermore, duodenum specimens were fixed in 10% formalin while under tension. Microscopic images were then taken to visualize the fibrous structure within the duodenum tissues under tension.

RESULTS

The results from the tensile test showed that the fracture energy had an isotropic positive and linear correlation with the elasticity to the negative 0.5th power (R2 = 0.89), which was also previously reported in small intestinal (jejunum) specimens. Furthermore, the tearing patterns of the duodenum were identical to the ones reported in the jejunum. Hematoxylin and eosin staining on tissues fixed under tension showed that the endomysium fibers are involved in providing resistance toward traction.

CONCLUSION

Through mechanical tests, we showed that porcine duodenum tissues also have a correlation between its fracture energy and elasticity. We also discussed that the histological structure of a tissue is an important factor that dictates how the tearing energy of a tissue will correlate to the elasticity. We understood that since the tearing mechanism between the duodenum and jejunum was similar, the correlations between their fracture energies and elasticities were also similar.

The Role of Mechanotransduction in Contact Inhibition of Locomotion and Proliferation

Contact inhibition (CI) represents a crucial tumor-suppressive mechanism responsible for controlling the unbridled growth of cells, thus preventing the formation of cancerous tissues. CI can be further categorized into two distinct yet interrelated components: CI of locomotion (CIL) and CI of proliferation (CIP). These two components of CI have historically been viewed as separate processes, but emerging research suggests that they may be regulated by both distinct and shared pathways. Specifically, recent studies have indicated that both CIP and CIL utilize mechanotransduction pathways, a process that involves cells sensing and responding to mechanical forces. This review article describes the role of mechanotransduction in CI, shedding light on how mechanical forces regulate CIL and CIP. Emphasis is placed on filamin A (FLNA)-mediated mechanotransduction, elucidating how FLNA senses mechanical forces and translates them into crucial biochemical signals that regulate cell locomotion and proliferation. In addition to FLNA, trans-acting factors (TAFs), which are proteins or regulatory RNAs capable of directly or indirectly binding to specific DNA sequences in distant genes to regulate gene expression, emerge as sensitive players in both the mechanotransduction and signaling pathways of CI. This article presents methods for identifying these TAF proteins and profiling the associated changes in chromatin structure, offering valuable insights into CI and other biological functions mediated by mechanotransduction. Finally, it addresses unanswered research questions in these fields and delineates their possible future directions.

E-cadherin adhesion dynamics as revealed by an accelerated force ramp are dependent upon the presence of α-catenin

Tissue remodeling and shape changes often rely on force-induced cell rearrangements occurring via cell-cell contact dynamics. Epithelial cell-cell contact shape changes are particularly dependent upon E-cadherin adhesion dynamics which are directly influenced by cell-generated and external forces. While both the mobility of E-cadherin adhesions and their adhesion strength have been reported before, it is not clear how these two aspects of E-cadherin adhesion dynamics are related. Here, using magnetic pulling cytometry, we applied an accelerated force ramp on the E-cadherin adhesion between an E-cadherin-coated magnetic microbead and an epithelial cell to ascertain this relationship. Our approach enables the determination of the adhesion strength and force-dependent mobility of individual adhesions, which revealed a direct correlation between these key characteristics. Since α-catenin has previously been reported to play a role in both E-cadherin mobility and adhesion strength when studied independently, we also probed epithelial cells in which α-catenin has been knocked out. We found that, in the absence of α-catenin, E-cadherin adhesions not only had lower adhesion strength, as expected, but were also more mobile. We observed that α-catenin was required for the recovery of strained cell-cell contacts and propose that the adhesion strength and force-dependent mobility of E-cadherin adhesions act in tandem to regulate cell-cell contact homeostasis. Our approach introduces a method which relates the force-dependent adhesion mobility to adhesion strength and highlights the morphological role played by α-catenin in E-cadherin adhesion dynamics.

α-Catenin Dependent E-cadherin Adhesion Dynamics as Revealed by an Accelerated Force Ramp

Tissue remodeling and shape changes often rely on force-induced cell rearrangements occurring via cell-cell contact dynamics. Epithelial cell-cell contact shape changes are particularly dependent upon E-cadherin adhesion dynamics which are directly influenced by cell-generated and external forces. While both the mobility of E-cadherin adhesions and their adhesion strength have been reported before, it is not clear how these two aspects of E-cadherin adhesion dynamics are related. Here, using magnetic pulling cytometry, we applied an accelerated force ramp on the E-cadherin adhesion between an E-cadherin-coated magnetic microbead and an epithelial cell to ascertain this relationship. Our approach enables the determination of the adhesion strength and force-dependent mobility of individual adhesions, which revealed a direct correlation between these key characteristics. Since α-catenin has previously been reported to play a role in both E-cadherin mobility and adhesion strength when studied independently, we also probed epithelial cells in which α-catenin has been knocked out. We found that, in the absence of α-catenin, E-cadherin adhesions not only had lower adhesion strength, as expected, but were also more mobile. We observed that α-catenin was required for the recovery of strained cell-cell contacts and propose that the adhesion strength and force-dependent mobility of E-cadherin adhesions act in tandem to regulate cell-cell contact homeostasis. Our approach introduces a method which relates the force-dependent adhesion mobility to adhesion strength and highlights the morphological role played by α-catenin in E-cadherin adhesion dynamics.

Trends in mechanobiology guided tissue engineering and tools to study cell-substrate interactions: a brief review

Sensing the mechanical properties of the substrates or the matrix by the cells and the tissues, the subsequent downstream responses at the cellular, nuclear and epigenetic levels and the outcomes are beginning to get unraveled more recently. There have been various instances where researchers have established the underlying connection between the cellular mechanosignalling pathways and cellular physiology, cellular differentiation, and also tissue pathology. It has been now accepted that mechanosignalling, alone or in combination with classical pathways, could play a significant role in fate determination, development, and organization of cells and tissues. Furthermore, as mechanobiology is gaining traction, so do the various techniques to ponder and gain insights into the still unraveled pathways. This review would briefly discuss some of the interesting works wherein it has been shown that specific alteration of the mechanical properties of the substrates would lead to fate determination of stem cells into various differentiated cells such as osteoblasts, adipocytes, tenocytes, cardiomyocytes, and neurons, and how these properties are being utilized for the development of organoids. This review would also cover various techniques that have been developed and employed to explore the effects of mechanosignalling, including imaging of mechanosensing proteins, atomic force microscopy (AFM), quartz crystal microbalance with dissipation measurements (QCMD), traction force microscopy (TFM), microdevice arrays, Spatio-temporal image analysis, optical tweezer force measurements, mechanoscanning ion conductance microscopy (mSICM), acoustofluidic interferometric device (AID) and so forth. This review would provide insights to the researchers who work on exploiting various mechanical properties of substrates to control the cellular and tissue functions for tissue engineering and regenerative applications, and also will shed light on the advancements of various techniques that could be utilized to unravel the unknown in the field of cellular mechanobiology.

Size and environment: The effect of phonon localization on micro-Brillouin imaging

Specifically designed samples have been analyzed to test the ability of Brillouin spectroscopy to provide reliable mechanical characterization of micro and nano-objects. The selected samples are polymeric films, whose transversal sizes from hundreds of nano- to some micro-meters cover the entire range of length-scales relevant in Brillouin scattering process. The experimental data highlight how, the size of the extended collective oscillation (acoustic phonons, in brief) is the lowest spatial resolution reachable in Brillouin mechanical characterization. Conversely, in the limit condition of phonon confinement, the technique provides the mechanical properties of nano-objects whose characteristic size is comparable with the phonon wavelength (⁓300 nm). Investigating acoustically heterogeneous materials, both size of heterogeneity and acoustic mismatch between adjacent regions are shown to be relevant in shaping the Brillouin response. In particular, a transition from a confined to a non-confined condition is obtained modulating the acoustic mismatch between the micro-objects and their local environment. The provided results and the derived analytic models for the data analysis will guide the interpretation of Brillouin spectra acquired in complex nano-structured samples such as cells, tissues or biomimetic materials. Our analysis can therefore generate new insights to tackle fundamental problems in mechanobiology or to characterize new bioengineered materials.

Editors' roundup: October 2022

This commentary constitutes the October edition of the 'Editors' roundup'-a multi-author omnibus of personal recommendations to interesting biophysics-related articles contributed by members of the editorial boards of leading international biophysics journals. The present commentary contains contributions from Progress in Biochemistry and Biophysics (an official journal of the Biophysical Society of China), European Biophysics Journal (the official journal of the European Biophysical Societies Association), Biophysical Reviews (the official IUPAB journal), and Biophysics (an official journal of the Russian Academy of Sciences). This edition of the Editors' Roundup also contains a new section from an editor at large who has provided selections from a number of journals on a single thematic topic.

Microscale mechanochemical characterization of drying oil films by in situ correlative Brillouin and Raman spectroscopy

Correlative Brillouin and Raman microspectroscopy (BRaMS) is applied for the in situ monitoring of the chemical and physical changes of linseed oil during polymerization. The viscoelastic properties of the drying oil throughout the phase transition were determined by Brillouin light scattering (BLS) and joined to the Raman spectroscopic information about the chemical process responsible for the oil hardening. A comparative study was then performed on an oil mock-up containing ZnO, one of the most common white pigments used in cultural heritage. The intriguing outcomes open new research perspectives for a deeper comprehension of the processes leading to the conversion of a fluid binder into a dry adhering film. The description of both chemical and structural properties of the polymeric network and their evolution are the basis for a better understanding of oil painting degradation. Last, as a feasibility test, BRaMS was applied to study a precious microfragment from J. Pollock's masterpiece Alchemy.

Localization-assisted stimulated Brillouin scattering spectroscopy

Brillouin spectroscopy has emerged as a promising modality to noninvasively probe the mechanical properties of biologically relevant materials. Stimulated Brillouin scattering (SBS) has the potential to improve measurement speed and resolution by exploiting a resonant amplification of the scattered signal, yet current SBS spectrometers have not provided significant improvements due to fundamental and practical limitations of illumination and detection parameters. To overcome this challenge, here we derive a signal localization theory for the Brillouin spectral domain and accordingly design an SBS spectrometer with much improved performances compared to state-of-the-art systems. We present experimental and simulated data validating our theory, which result in a tenfold improvement in acquisition speed, or an order of magnitude improved spectral precision, for SBS spectral measurements when properly optimizing the SBS photon detection architecture.

Brillouin and Raman Micro-Spectroscopy: A Tool for Micro-Mechanical and Structural Characterization of Cortical and Trabecular Bone Tissues

Human bone is a specialized tissue with unique material properties, providing mechanical support and resistance to the skeleton and simultaneously assuring capability of adaptation and remodelling. Knowing the properties of such a structure down to the micro-scale is of utmost importance, not only for the design of effective biomimetic materials but also to be able to detect pathological alterations in material properties, such as micro-fractures or abnormal tissue remodelling. The Brillouin and Raman micro-spectroscopic (BRmS) approach has the potential to become a first-choice technique, as it is capable of simultaneously investigating samples’ mechanical and structural properties in a non-destructive and label-free way. Here, we perform a mapping of cortical and trabecular bone sections of a femoral epiphysis, demonstrating the capability of the technique for discovering the morpho-mechanics of cells, the extracellular matrix, and marrow constituents. Moreover, the interpretation of Brillouin and Raman spectra merged with an approach of data mining is used to compare the mechanical alterations in specimens excised from distinct anatomical areas and subjected to different sample processing. The results disclose in both cases specific alterations in the morphology and/or in the tissue chemical make-up, which strongly affects bone mechanical properties, providing a method potentially extendable to other important biomedical issues.