Enzymatic synthesis of bioactive compounds with high potential for cosmeceutical application

Recovery of green phenolic compounds from lignin-based source: Role of ferulic acid esterase towards waste valorization and bioeconomic perspectives

The production of chemicals/products so far relies on fossil-based resources with the creation of several environmental problems at the global level. In this situation, a sustainable and circular economy model is necessitated to mitigate global environmental issues. Production of biowaste from various processing industries also creates environmental issues which would be valorized for the production of industrially important reactive and bioactive compounds. Lignin acts as a vital part in biowaste composition which can be converted into a wide range of phenolic compounds. The phenolic compounds have attracted much attention, owing to their influence on diverse not only organoleptic parameters, such as taste or color, but also active agents for active packaging systems. Crop residues of varied groups, which are an affluent source of lignocellulosic biomass could serve as a renewable resource for the biosynthesis of ferulic acid (FA). FA is obtained by the FA esterase enzyme action, and it can be further converted into various tail end phenolic flavor green compounds like vanillin, vanillic acid and hydroxycinnamic acid. Lignin being renewable in nature, processing and management of biowastes towards sustainability is the need as far as the global industrial point is concerned. This review explores all the approaches for conversion of lignin into value-added phenolic compounds that could be included to packaging applications. These valorized products can exhibit the antioxidant, antimicrobial, cardioprotective, anti-inflammatory and anticancer properties, and due to these features can emerge to incorporate them into production of functional foods and be utilization of them at active food packaging application. These approaches would be an important step for utilization of the recovered bioactive compounds at the nutraceutical and food industrial sectors.

Adsorption of lipases on porous silica-based materials for esterification in a solvent-free system

This study deals with lipase immobilization on micro- and mesoporous silica-based materials. The effects of the type of support (silica MCM-41, zeolite HZSM-5 (SAR 25), zeolite HZSM-5 (SAR 280), and the silica-aluminas Siral 10, Siral 20, and Siral 40) were investigated on the immobilization of lipase B from Candida antarctica (CALB) and lipase from Rhizomucor miehei (RML). The supports that allowed the highest immobilization efficiencies for the CALB were Siral 40 (91.4%), HZSM-5 (SAR 280) (90.6%), and MCM-41 (89.4%). Siral 20 allowed the highest immobilization efficiency for RML (97.6%), followed by HZSM-5 (SAR 25) (77.1%) and HZSM-5 (SAR 280) (62.7%). The effect of protein concentration on lipase immobilization was investigated, and the results adjusted well on the Langmuir isotherm model (R2 > 0.9). The maximum protein adsorption capacity of the support determined by the Langmuir model was equal to 10.64 and 20.97 mgprotein gsupport-1 for CALB and RML, respectively. The effects of pH (pH 7.0 and pH 11.0) and phosphate buffer solution concentration (5 and 100 mmol L-1) were also investigated on lipase immobilization. The immobilization efficiency for both lipases was similar for the different pH values. The use of 100 mmol L-1 phosphate buffer decreased the lipase immobilization efficiency. The biocatalysts (CALB-Siral 40 and RML-Siral 20) were tested in the ethyl oleate synthesis. The conversion of 61.7% was obtained at 60 °C in the reaction catalyzed by CALB-Siral 40. Both heterogeneous biocatalysts showed increased thermal stability compared with their free form. Finally, the reuse of the biocatalysts was studied. CALB-Siral 40 and RML-Siral 20 maintained about 30% of the initial conversion after 3 batches of ethyl oleate synthesis. Silica-aluminas (Siral 20 and 40) proved to be a support that allowed a high efficiency of immobilization of lipases and activity for esterification reaction.

High-yield production of β-arbutin by identifying and eliminating byproducts formation

β-Arbutin is a plant-derived glycoside and widely used in cosmetic and pharmaceutical industries because of its safe and effective skin-lightening property as well as anti-oxidant, anti-microbial, and anti-inflammatory activities. In recent years, microbial fermentation has become a highly promising method for the production of β-arbutin. However, this method suffers from low titer and low yield, which has become the bottleneck for its widely industrial application. In this study, we used β-arbutin to demonstrate methods for improving yields for industrial-scale production in Escherichia coli. First, the supply of precursors phosphoenolpyruvate and uridine diphosphate glucose was improved, leading to a 4.6-fold increase in β-arbutin production in shaking flasks. The engineered strain produced 36.12 g/L β-arbutin with a yield of 0.11 g/g glucose in a 3-L bioreactor. Next, based on the substrate and product's structural similarity, an endogenous O-acetyltransferase was identified as responsible for 6-O-acetylarbutin formation for the first time. Eliminating the formation of byproducts, including 6-O-acetylarbutin, tyrosine, and acetate, resulted in an engineered strain producing 43.79 g/L β-arbutin with a yield of 0.22 g/g glucose in fed-batch fermentation. Thus, the yield increased twofold by eliminating byproducts formation. To the best of our knowledge, this is the highest titer and yield of β-arbutin ever reported, paving the way for the industrial production of β-arbutin. This study demonstrated a systematic strategy to alleviate undesirable byproduct accumulation and improve the titer and yield of target products. KEY POINTS: • A systematic strategy to improve titer and yield was showed • Genes responsible for 6-O-acetylarbutin formation were firstly identified • 43.79 g/L β-arbutin was produced in bioreactor, which is the highest titer so far.

Glycosylation of polyphenolic compounds: Design of a self-sufficient biocatalyst by co-immobilization of a glycosyltransferase, a sucrose synthase and the cofactor UDP

Glycosyltransferases catalyze the regioselective glycosylation of polyphenolic compounds, increasing their solubility without altering their antioxidant properties. Leloir-type glycosyltransferases require UDP-glucose as a cofactor to glycosylate a hydroxyl of the polyphenol, which is expensive and unstable. To simplify these processes for industrial implementation, the preparation of self-sufficient heterogeneous biocatalysts is needed. In this study, a glycosyltransferase and a sucrose synthase (as an UDP-regenerating enzyme) were co-immobilized onto porous agarose-based supports coated with polycationic polymers: polyethylenimine and polyallylamine. In addition, the UDP cofactor was strongly ionically adsorbed and co-immobilized with the enzymes, eliminating the need to add it separately. Thus, the optimal self-sufficient heterogeneous biocatalyst was able to catalyze the glycosylation of three polyphenolic compounds (piceid, phloretin and quercetin) with in situ regeneration of the UDP-glucose, allowing multiple consecutive reaction cycles without the addition of exogenous cofactor. A TTN value of 50 (theoretical maximum) was obtained in the reaction of piceid glycosylation, after 5 reaction cycles, using the self-sufficient biocatalyst based on an improved sucrose synthase variant. This result was 5-fold higher than the obtained using soluble cofactor and the co-immobilized enzymes, and much higher than those reported in the literature for similar processes.

Solvent Engineering for Nonpolar Substrate Glycosylation Catalyzed by the UDP-Glucose-Dependent Glycosyltransferase UGT71E5: Intensification of the Synthesis of 15-Hydroxy Cinmethylin β-d-Glucoside

Sugar nucleotide-dependent glycosyltransferases are powerful catalysts of the glycosylation of natural products and xenobiotics. The low solubility of the aglycone substrate often limits the synthetic efficiency of the transformation catalyzed. Here, we explored different approaches of solvent engineering for reaction intensification of β-glycosylation of 15HCM (a C15-hydroxylated, plant detoxification metabolite of the herbicide cinmethylin) catalyzed by safflower UGT71E5 using UDP-glucose as the donor substrate. Use of a cosolvent (DMSO, ethanol, and acetonitrile; ≤50 vol %) or a water-immiscible solvent (n-dodecane, n-heptane, n-hexane, and 1-hexene) was ineffective due to enzyme activity and stability, both impaired ≥10-fold compared to a pure aqueous solvent. Complexation in 2-hydroxypropyl-β-cyclodextrin enabled dissolution of 50 mM 15HCM while retaining the UGT71E5 activity (∼0.32 U/mg) and stability. Using UDP-glucose recycling, 15HCM was converted completely, and 15HCM β-d-glucoside was isolated in 90% yield (∼150 mg). Collectively, this study highlights the requirement for a mild, enzyme-compatible strategy for aglycone solubility enhancement in glycosyltransferase catalysis applied to glycoside synthesis.

Non-Native Site-Selective Enzyme Catalysis

The ability to site-selectively modify equivalent functional groups in a molecule has the potential to streamline syntheses and increase product yields by lowering step counts. Enzymes catalyze site-selective transformations throughout primary and secondary metabolism, but leveraging this capability for non-native substrates and reactions requires a detailed understanding of the potential and limitations of enzyme catalysis and how these bounds can be extended by protein engineering. In this review, we discuss representative examples of site-selective enzyme catalysis involving functional group manipulation and C-H bond functionalization. We include illustrative examples of native catalysis, but our focus is on cases involving non-native substrates and reactions often using engineered enzymes. We then discuss the use of these enzymes for chemoenzymatic transformations and target-oriented synthesis and conclude with a survey of tools and techniques that could expand the scope of non-native site-selective enzyme catalysis.

Mexican Native Black Bean Anthocyanin-Rich Extracts Modulate Biological Markers Associated with Inflammation

This work aimed to obtain and characterize anthocyanin-rich extracts (ARE) from native black beans and evaluate their antioxidant and anti-inflammatory potential. The initial extract was obtained by supercritical fluids (RE) and purified using Amberlite^® XAD-7 resin (PE). RE and PE were fractionated using countercurrent chromatography, and four fractions were obtained (REF1 and REF2 from RE, PEF1, and PEF2 from PE). ARE and fractions were characterized, and the biological potential was evaluated. ABTS IC₅₀ values ranged from 7.9 to 139.2 (mg C3GE/L), DPPH IC₅₀ ranged from 9.2 to 117.2 (mg C3GE/L), and NO IC₅₀ ranged from 0.6 to143.8 (mg C3GE/L) (p < 0.05). COX-1 IC₅₀ ranged from 0.1 to 0.9 (mg C3GE/L), COX-2 IC₅₀ ranged from 0.01 to 0.7 (mg C3GE/L), and iNOS IC₅₀ ranged from 0.9 to 5.6 (mg C3GE/L) (p < 0.05). The theoretical binding energy for phenolic compounds ranged from -8.45 to -1.4 kcal/mol for COX-1, from -8.5 to -1.8 kcal/mol for COX-2, and from -7.2 to -1.6 kcal/mol for iNOS. RE and REF2 presented the highest antioxidant and anti-inflammatory potential. Countercurrent chromatography effectively isolates and purifies bioactive compounds while maintaining their biological potential. Native black beans present an attractive phytochemical profile and could be used as ingredients in nutraceuticals and functional foods.

Thymus satureioides Coss.: Mineral Composition, Nutritional Value, Phytochemical Profiling, and Dermatological Properties

Zaitra, Thymus satureioides, is an aromatic plant with a long history of use in traditional medicine. In this study, we assessed the mineral composition, nutritional value, phytocontents, and dermatological properties of the aerial parts of T. satureioides. The plant contained high contents of calcium and iron, moderate levels of magnesium, manganese, and zinc, and low contents of total nitrogen, total phosphorus, total potassium, and copper. It is rich in several amino acids, including asparagine, 4-hydroxyproline, isoleucine, and leucine, and the essential amino acids account for 60.8%. The extract contains considerable amounts of polyphenols and flavonoids (TPC = 118.17 mg GAE/g extract and TFC = 32.32 mg quercetin/g extract). It also comprises 46 secondary metabolites, identified through LC-MS/MS analysis, belonging to phenolic acids, chalcones, and flavonoids. The extract elicited pronounced antioxidant activities, inhibited the growth of P. aeruginosa (MIC = 50 mg/mL), and reduced biofilm formation by up to 35.13% using the ¼ sub-MIC of 12.5 mg/mL. Moreover, bacterial extracellular proteins and exopolysaccharides were diminished by 46.15% and 69.04%, respectively. Likewise, the swimming of the bacterium was impaired (56.94% decrease) in the presence of the extract. In silico, skin permeability and sensitization effects revealed that out of the 46 identified compounds, 33 were predicted to be exempt from any skin sensitivity risk (Human Sensitizer Score ≤ 0.5), while extensive skin permeabilities were observed (Log K_p = -3.35--11.98 cm/s). This study provides scientific evidence about the pronounced activities of T. satureioides, supports its traditional uses, and promotes its utilization in the development of new drugs, food supplements, and dermatological agents.

The Inhibitory Potential of Ferulic Acid Derivatives against the SARS-CoV-2 Main Protease: Molecular Docking, Molecular Dynamics, and ADMET Evaluation

The main protease (Mpro) of SARS-CoV-2 is an appealing target for the development of antiviral compounds, due to its critical role in the viral life cycle and its high conservation among different coronaviruses and the continuously emerging mutants of SARS-CoV-2. Ferulic acid (FA) is a phytochemical with several health benefits that is abundant in plant biomass and has been used as a basis for the enzymatic or chemical synthesis of derivatives with improved properties, including antiviral activity against a range of viruses. This study tested 54 reported FA derivatives for their inhibitory potential against Mpro by in silico simulations. Molecular docking was performed using Autodock Vina, resulting in comparable or better binding affinities for 14 compounds compared to the known inhibitors N3 and GC376. ADMET analysis showed limited bioavailability but significantly improved the solubility for the enzymatically synthesized hits while better bioavailability and druglikeness properties but higher toxicity were observed for the chemically synthesized ones. MD simulations confirmed the stability of the complexes of the most promising compounds with Mpro, highlighting FA rutinoside and compound e27 as the best candidates from each derivative category.

Chemical modification of lipases: A powerful tool for activity improvement

The demand for adequate and ecologically acceptable procedures to produce the most differentiated products has been growing in recent decades, with enzymes being excellent examples of the advances achieved so far. Lipases are astonishing catalysts with a vast range of applications including the synthesis of esters, flavours, biodiesel, and polymers. The broad specificity of the substrates, as well as the regio-, stereo-, and enantioselectivity, are the differentiating factors of these enzymes. Structural modification is a current approach to enhance the activity of lipases. Chemical modification of lipases to improve catalytic performance is of great interest considering the increasingly broad fields of application. Together with the physical immobilization onto solid supports, different strategies have been developed to produce catalysts with higher activity and stability. In this review, practical insights into the different strategies developed in recent years regarding the modification of lipases are described. For the first time, the impact of the modifications on the activity and stability of lipases, as well as on the biotechnological applications, is fully compiled. This article is protected by copyright. All rights reserved.

Ferulic Acid From Plant Biomass: A Phytochemical With Promising Antiviral Properties

Plant biomass is a magnificent renewable resource for phytochemicals that carry bioactive properties. Ferulic acid (FA) is a hydroxycinnamic acid that is found widespread in plant cell walls, mainly esterified to polysaccharides. It is well known of its strong antioxidant activity, together with numerous properties, such as antimicrobial, anti-inflammatory and neuroprotective effects. This review article provides insights into the potential for valorization of FA as a potent antiviral agent. Its pharmacokinetic properties (absorption, metabolism, distribution and excretion) and the proposed mechanisms that are purported to provide antiviral activity are presented. Novel strategies on extraction and derivatization routes, for enhancing even further the antiviral activity of FA and potentially favor its metabolism, distribution and residence time in the human body, are discussed. These routes may lead to novel high-added value biorefinery pathways to utilize plant biomass toward the production of nutraceuticals as functional foods with attractive bioactive properties, such as enhancing immunity toward viral infections.

Tailored Functionalization of Natural Phenols to Improve Biological Activity

Phenols are widespread in nature, being the major components of several plants and essential oils. Natural phenols' anti-microbial, anti-bacterial, anti-oxidant, pharmacological and nutritional properties are, nowadays, well established. Hence, given their peculiar biological role, numerous studies are currently ongoing to overcome their limitations, as well as to enhance their activity. In this review, the functionalization of selected natural phenols is critically examined, mainly highlighting their improved bioactivity after the proper chemical transformations. In particular, functionalization of the most abundant naturally occurring monophenols, diphenols, lipidic phenols, phenolic acids, polyphenols and curcumin derivatives is explored.

The beauty of biocatalysis: sustainable synthesis of ingredients in cosmetics

Covering: 2015 up to July 2021The market for cosmetics is consumer driven and the desire for green, sustainable and natural ingredients is increasing. The use of isolated enzymes and whole-cell organisms to synthesise these products is congruent with these values, especially when combined with the use of renewable, recyclable or waste feedstocks. The literature of biocatalysis for the synthesis of ingredients in cosmetics in the past five years is herein reviewed.

Striae Distensae: In Vitro Study and Assessment of Combined Treatment With Sodium Ascorbate and Platelet-Rich Plasma on Fibroblasts

INTRODUCTION

Striae distensae (SD) appear clinically as parallel striae, lying perpendicular to the tension lines of the skin. SD evolve into two clinical phases, an initial inflammatory phase in which they are called "striae rubrae" (SR) and a chronic phase in which they are called striae albae (SA). Fibroblasts seem to play a key role in the pathogenesis of stretch marks. This study was aimed at describing and analyzing stretch marks-derived fibroblasts (SMF), the differences between SR- and SA-derived fibroblasts (SRF, SAF), testing two treatments in vitro (sodium ascorbate and PrP) on SAF.

MATERIAL AND METHODS

To characterize the SMF, the expression of alpha smooth muscle actin (alpha SMA) was investigated. Type I collagen expression was measured in SAF, before and after adding different PrP concentrations and sodium ascorbate in the culture medium. Results were processed through statistical analysis models using the Student's t-test.

RESULTS

A significant increase in alpha SMA (P <0.001) was observed in SRF. SAF treated with PrP and sodium ascorbate showed a resumption of their metabolic activity by an increase in collagen type I production and cell proliferation. After 24 h of incubation with PrP 1% and PrP 5% + sodium ascorbate, cell viability was increased by 140% and 151% and by 156 and 178% after 48 h, respectively, compared to the control.

CONCLUSION

Our study shows that a biologically mediated improvement in SMF metabolic activity is possible. Our promising results require further trials to be able to confirm the reproducibility of this combined treatment, particularly in vivo.

NO LEVEL ASSIGNED

This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable.

Propyl Gallate

The title compound, propyl gallate (III), is an important substance popularly used in the food, cosmetic and pharmaceutical industries. Current chemical syntheses of this compound are based on the acylation supported by thionyl chloride, DIC/DMAP or Fischer esterification using a range of homogenous and heterogenous catalysts. In this paper, an efficient, green, straightforward, and economical method for synthesizing propyl gallate using potassium hydrogen sulfate, KHSO4, as the heterogenous acidic catalyst has been developed for the first time. In addition, this paper provides a comprehensive spectral dataset for the title compound, especially the new data on DEPT and 2D NMR (HSQC and HMBC) spectra which are not currently available in the literature.

Molecular modeling and phenoloxidase inhibitory activity of arbutin and arbutin undecylenic acid ester

Excessive melanin formation has been linked to various skin disorders such as hyperpigmentation and skin cancer. Tyrosinase is the most prominent target for inhibitors of melanin production. In this study, we investigated whether arbutin and its prodrug, arbutin undecylenic acid ester, might inhibit phenoloxidase (PO), a tyrosinase-like enzyme. Molecular docking simulation results suggested that arbutin and arbutin undecylenic acid ester can bind to the substrate-binding pocket of PO. Arbutin undecylenic acid ester with an IC₅₀ 6.34 mM was effective to inhibit PO compared to arbutin (IC₅₀ 29.42 mM). In addition, arbutin undecylenic acid ester showed low cytotoxicity in Drosophila S2 cells and the compound inhibited the melanization reaction. Therefore, the results of this study have demonstrated that arbutin undecylenic acid ester as a potential inhibitor of PO. We successfully designed a new platform utilizing Drosophila melanogaster and Bombyx mori as animal models propounding fast, cheap, and high effectiveness in method to screen tyrosinase inhibitors.

Chitosan-based CLEAs from Aspergillus niger type A feruloyl esterase: high-productivity biocatalyst for alkyl ferulate synthesis

The enzymatic synthesis of alkyl ferulates is an important reaction in cosmetic and pharmaceutical chemistries, since it may allow to expand the biorefinery concept valorizing biomass wastes enriched in ferulic acid. However, robust biocatalysts for that purpose are scarce. Herein, we have immobilized the type A feruloyl esterase from Aspergillus niger (AnFaeA) as cross-linked enzyme aggregates, employing chitosan as co-feeder (ChCLEAs). High immobilization yields and relative activity recovery were attained in all assessed conditions (> 93%). Furthermore, we enhanced the thermal stability of the soluble enzyme 32-fold. AnFaeA-ChCLEAs were capable to quantitatively perform the solvent-free direct esterification of short- to medium-chain alkyl ferulates (C4-C12) in less than 24 h. By raising the operational temperature to 50 °C, AnFaeA-ChCLEAs transformed 350 mM ferulic acid into isopentyl ferulate with a space-time yield of 46.1 g of product × L^-1 × day^-1, 73-fold higher than previously reported. The overall sustainability of this alkyl ferulate production bioprocess is supported by the high total turnover number (TTN 7 × 10⁵) and the calculated green metrics (E factor = 30). Therefore, we herein present a robust, efficient, and versatile heterogeneous biocatalyst useful for the synthesis of a wide diversity of alkyl ferulates. KEY POINTS: • CLEAs of feruloyl esterase A from A. niger using chitosan as co-feeder were obtained. • Microenvironment of the biocatalysts allowed to obtain C1 to C18 alkyl ferulates. • Biocatalyst at boundary conditions showed a high productivity of 46 g/L day. Graphical Abstract.

Work-hardening Photopolymer from Renewable Photoactive 3,3'-(2,5-Furandiyl)bisacrylic Acid

The design of a photopolymer around a renewable furan-derived chromophore is presented herein. An optimised semi-continuous oxidation method using MnO2 affords 2,5-diformylfuran from 5-(hydroxymethyl)furfural in gram quantities, allowing the subsequent synthesis of 3,3'-(2,5-furandiyl)bisacrylic acid in good yield and excellent stereoselectivity. The photoactivity of the diester of this monomer is confirmed by reaction under UV irradiation, and the proposed [2+2] cycloaddition mechanism supported further by TD-DFT calculations. Oligoesters of the photoreactive furan diacid with various aliphatic diols are prepared via chemo- and enzyme-catalysed polycondensation. The latter enzyme-catalysed (Candida antarctica lipase B) method results in the highest Mn (3.6 kDa), suggesting milder conditions employed with this protocol minimised unwanted side reactions, including untimely [2+2] cycloadditions, whilst preserving the monomer's photoactivity and stereoisomerism. The photoreactive polyester is solvent cast into a film where subsequent initiator-free UV curing leads to an impressive increase in the material stiffness, with work-hardening characteristics observed during tensile strength testing.

Plant In Vitro Systems as a Sustainable Source of Active Ingredients for Cosmeceutical Application

Cosmeceuticals are hybrids between cosmetics and pharmaceuticals which are being designed for a dual purpose: (1) To provide desired esthetical effects and (2) simultaneously treat dermatological conditions. The increased demand for natural remedies and the trends to use natural and safe ingredients resulted in intensive cultivation of medicinal plants. However, in many cases the whole process of plant cultivation, complex extraction procedure, and purification of the targeted molecules are not economically feasible. Therefore, the desired production of natural cosmetic products in sustainable and controllable fashion in the last years led to the intensive utilization of plant cell culture technology. The present review aims to highlight examples of biosynthesis of active ingredients derived through plant in vitro systems with potential cosmeceutical application. The exploitation of different type of extracts used in a possible cosmeceutical formulation, as well as, their activity tested in in vitro/in vivo models is thoroughly discussed. Furthermore, opportunities to manipulate the biosynthetic pathway, hence engineering the biosynthesis of some secondary metabolites, such as anthocyanins, have been highlighted.

Carrier-bound and carrier-free immobilization of type A feruloyl esterase from Aspergillus niger: Searching for an operationally stable heterogeneous biocatalyst for the synthesis of butyl hydroxycinnamates

Feruloyl esterases synthesize butyl hydroxycinnamates, molecules possessing interesting biological properties, nonetheless, they exhibit a low stability under synthesis conditions in organic solvents, restricting its use. To enhance its operational stability in synthesis, we immobilized type A feruloyl esterase from Aspergillus niger (AnFAEA) using several carrier-bound and carrier-free strategies. The most active biocatalysts were: 1) AnFAEA immobilized on epoxy-activated carriers (protein load of 0.6 mg_enzyme x mg^-1_carrier) that recovered 91 % of the initial hydrolytic activity, and 2) AnFAEA aggregated and cross-linked in the presence of 5 mg of BSA and 15 mM of glutaraldehyde (AnFAEA-amino-CLEAs), which exhibited 385 % of its initial hydrolytic activity; both using 4-nitrophenyl butyrate as substrate. The AnFAEA-amino-CLEAs were 12.7 times more thermostable at 60 °C than the AnFAEA immobilized on epoxy-activated carrier, thus AnFAEA-amino-CLEAs were selected for further characterization. Interestingly, during methyl sinapate hydrolysis (pH 7.2 and 30 °C), AnFAEA-amino-CLEAs K_M was 15 % higher, while during butyl sinapate synthesis the K_M was reduced in 63 %, both compared with the soluble enzyme. The direct esterification of butyl sinapate at solvent free conditions using sinapic acid 50 mM, reached 95 % conversion after 24 h employing AnFAEA-amino-CLEAs, which could be used for 10 cycles without significant activity losses, demonstrating their outstanding operational stability.

Deciphering the molecular specificity of phenolic compounds as inhibitors or glycosyl acceptors of β-fructofuranosidase from Xanthophyllomyces dendrorhous

Enzymatic glycosylation of polyphenols is a tool to improve their physicochemical properties and bioavailability. On the other hand, glycosidic enzymes can be inhibited by phenolic compounds. In this work, we studied the specificity of various phenolics (hydroquinone, hydroxytyrosol, epigallocatechin gallate, catechol and p-nitrophenol) as fructosyl acceptors or inhibitors of the β-fructofuranosidase from Xanthophyllomyces dendrorhous (pXd-INV). Only hydroquinone and hydroxytyrosol gave rise to the formation of glycosylated products. For the rest, an inhibitory effect on both the hydrolytic (H) and transglycosylation (T) activity of pXd-INV, as well as an increase in the H/T ratio, was observed. To disclose the binding mode of each compound and elucidate the molecular features determining its acceptor or inhibitor behaviour, ternary complexes of the inactive mutant pXd-INV-D80A with fructose and the different polyphenols were analyzed by X-ray crystallography. All the compounds bind by stacking against Trp105 and locate one of their phenolic hydroxyls making a polar linkage to the fructose O2 at 3.6–3.8 Å from the C2, which could enable the ulterior nucleophilic attack leading to transfructosylation. Binding of hydroquinone was further investigated by soaking in absence of fructose, showing a flexible site that likely allows productive motion of the intermediates. Therefore, the acceptor capacity of the different polyphenols seems mediated by their ability to make flexible polar links with the protein, this flexibility being essential for the transfructosylation reaction to proceed. Finally, the binding affinity of the phenolic compounds was explained based on the two sites previously reported for pXd-INV.

Development and economic evaluation of an eco-friendly biocatalytic synthesis of emollient esters

During the past decades the understanding and prospects of enzyme-catalysed reactions have been massively widened and there are a number of implemented large-scale enzymatic processes mainly based in the use of commercial biocatalysts. As it might happen that the same process can be successfully carried out by different commercial lipases, the election of the biocatalyst must rely on productivity and economic considerations. This work presents productiveness and direct operation cost evaluation as a key tool for the selection between two commercial lipase catalysts, the versatile but expensive Novozym^® 435 and a much more economical option, Lipozyme^® TL IM, in the synthesis of spermaceti, a mixture of emollient esters with cosmetic applications. Proving that Novozym^® 435 leads to minimum savings of 10% with respect to the cheapest immobilized derivative, biocatalyst cost does not appear to be the major contribution to the economics of the processes under study, due to their great capacity to be recovered and reused. At laboratory scale, the biggest economic investment is caused by substrates, which can be massively reduced at industrial scale by using bulk reagents. In such case, energy cost may be the major contribution to the process economy. This work proposes an optimized process ready to be scaled-up in order to accurately determine the energetic requirements of the possible industrial enzymatic synthesis.

Bioorganic synthesis, characterization and evaluation of a natural phenolic lipid

•

First bioorganic synthesis of a novel phenolic lipid isolated from natural source.

•

The phenolic lipid was synthesized following a chemo-enzymatic approach.

•

Lipase-catalyzed transformation was employed in the synthesis.

•

The prepared phenolic lipid exhibited excellent antioxidant potential.

•

The prepared phenolic lipid could have great potential in food and cosmetic formulations.

The first synthesis of a phenolic natural monoacylglycerol (1- [11-(ferulyloxy) undecanoyl)] glycerol) was carried out by bioorganic synthesis starting from ferulic acid. The synthetic route of the target lipidic compound was designed involving a chemo-enzymatic approach using immobilized Candida antarctica lipase as biocatalyst in two of the steps conducted in organic medium. The prepared lipidic compound was characterized by using spectral data and evaluated for antimicrobial, antioxidant and cytotoxic studies to examine its potential. The synthesized compound showed moderate antimicrobial activity and showed very good antioxidant activity in DPPH radical scavenging assay and also in oxidation inhibition in soybean oil by differential scanning calorimetry. The cytotoxic studies of the synthetic lipid showed promising activity against A549 and HeLa cancer cell lines with IC₅₀ values of 9.102 and 9.886 μM respectively. The prepared compound can be useful in designing novel phenolic lipids with potential applications in cosmetic and biomedical fields.

Directed evolution of the type C feruloyl esterase from Fusarium oxysporum FoFaeC and molecular docking analysis of its improved variants

The need to develop competitive and eco-friendly processes in the cosmetic industry leads to the search for new enzymes with improved properties for industrial bioconversions in this sector. In the present study, a complete methodology to generate, express and screen diversity for the type C feruloyl esterase from Fusarium oxysporium FoFaeC was set up in a high-throughput fashion. A library of around 30,000 random mutants of FoFaeC was generated by error prone PCR of fofaec cDNA and expressed in Yarrowia lipolytica. Screening for enzymatic activity towards the substrates 5-bromo-4-chloroindol-3-yl and 4-nitrocatechol-1-yl ferulates allowed the selection of 96 enzyme variants endowed with improved enzymatic activity that were then characterized for thermo- and solvent- tolerance. The five best mutants in terms of higher activity, thermo- and solvent- tolerance were selected for analysis of substrate specificity. Variant L432I was shown to be able to hydrolyze all the tested substrates, except methyl sinapate, with higher activity than wild type FoFaeC towards methyl p-coumarate, methyl ferulate and methyl caffeate. Moreover, the E455D variant was found to maintain completely its hydrolytic activity after two hour incubation at 55 °C, whereas the L284Q/V405I variant showed both higher thermo- and solvent- tolerance than wild type FoFaeC. Small molecule docking simulations were applied to the five novel selected variants in order to examine the binding pattern of substrates used for enzyme characterization of wild type FoFaeC and the evolved variants.

Preparation of Retinoyl-Flavonolignan Hybrids and Their Antioxidant Properties

Antioxidants protect the structural and functional components in organisms against oxidative stress. Most antioxidants are of plant origin as the plants are permanently exposed to oxidative stress (UV radiation, photosynthetic reactions). Both carotenoids and flavonoids are prominent antioxidant and anti-radical agents often occurring together in the plant tissues and acting in lipophilic and hydrophilic milieu, respectively. They are complementary in their anti-radical activity. This study describes the synthesis of a series of hybrid ester conjugates of retinoic acid with various flavonolignans, such as silybin, 2,3-dehydrosilybin and isosilybin. Antioxidant/anti-radical activities and bio-physical properties of novel covalent carotenoid-flavonoid hybrids, as well as various mixtures of the respective parent components, were investigated. Retinoyl conjugates with silybin—which is the most important flavonolignan in silymarin complex—(and its pure diastereomers) displayed better 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity than both the parent compounds and their equimolar mixtures.

Terrestrial Microorganisms: Cell Factories of Bioactive Molecules with Skin Protecting Applications

It is well known that terrestrial environments host an immense microbial biodiversity. Exposed to different types of stress, such as UV radiation, temperature fluctuations, water availability and the inter- / intra-specific competition for resources, terrestrial microorganisms have been evolved to produce a large spectrum of bioactive molecules. Bacteria, archaea, protists, fungi and algae have shown a high potential of producing biomolecules for pharmaceutical or other industrial purposes as they combine a sustainable, relatively low-cost and fast-production process. Herein, we provide an overview of the different bioactive molecules produced by terrestrial microorganisms with skin protecting applications. The high content in polyphenolic and carotenoid compounds produced by several strains, as well as the presence of exopolysaccharides, melanins, indole and pyrrole derivatives, mycosporines, carboxylic acids and other molecules, are discussed in the context of their antioxidant, photo-protective and skin-whitening activity. Relevant biotechnological tools developed for the enhanced production of high added value natural products, as well as the protecting effect of some antioxidant, hydrolytic and degrading enzymes are also discussed. Furthermore, we describe classes of microbial compounds that are used or have the potential to be used as antimicrobials, moisturizers, biosurfactants, pigments, flavorings and fragrances.

Thermophilic enzyme systems for efficient conversion of lignocellulose to valuable products: Structural insights and future perspectives for esterases and oxidative catalysts

Thermophilic enzyme systems are of major importance nowadays in all industrial processes due to their great performance at elevated temperatures. In the present review, an overview of the current knowledge on the properties of thermophilic and thermotolerant carbohydrate esterases and oxidative enzymes with great thermostability is provided, with respect to their potential use in biotechnological applications. A special focus is given to the lytic polysaccharide monooxygenases that are able to oxidatively cleave lignocellulose through the use of oxygen or hydrogen peroxide as co-substrate and a reducing agent as electron donor. Structural characteristics of the enzymes, including active site conformation and surface properties are discussed and correlated with their substrate specificity and thermostability properties.

Phenol removal by laccases and other phenol oxidases of Pleurotus sajor-caju PS-2001 in submerged cultivations and aqueous mixtures

In this work, phenol removal from aqueous solutions by Pleurotus sajor-caju PS-2001 phenol oxidases was assessed under different conditions. In stirred-tank reactor (STR), 77, 82, 92 and 36% of removal were attained when initial concentrations of 1.0, 2.0, 3.0 and 4.0 mmol L^-1 phenol, respectively, were used. Among the different enzymes produced by this fungus, phenol removal seems to be related to the activity of laccases that attained maximum values between 33 and 91 U mL^-1 in STR. With an internal-loop airlift reactor (ILAR), phenol concentrations of 1.0, 2.0, 3.0, 4.0 and 5.0 mmol L^-1 were evaluated, and removal of 70, 76, 82, 77 and 82%, respectively, were observed. In ILAR, however, superior maximum titres of laccases were quantified (80-285 U mL^-1). Crude enzyme broths have also been tested for phenol removal from 3.0 mmol L^-1 aqueous solutions, the best result (55% of removal) being obtained at pH 3.2 and 30 °C, without agitation, using 60 U mL^-1 laccases. According to the data presented, phenol can be efficiently removed from liquid media in submerged cultures of P. sajor-caju PS-2001 even when carried out in a simple pneumatic reactor, whereas significantly less amount of the pollutant is degraded when a crude enzyme broth is used.

Influence of ionic liquid on Novozym 435-catalyzed the transesterification of castor oil and ethyl caffeate

Caffeic acid (CA), one kind of phenolic acids widely occurring in the plant kingdom, can be used as potential UV protective ingredient and antioxidant. However, the application of CA was limited because of its unsatisfactory solubility in hydrophilic and lipophilic media. In this work, BMIMPF₆, one kind of ionic liquids (ILs), was developed as an environmental friendly reaction media for the enzymatic preparation of CA derivatives by the transesterification of castor oil (CO) and ethyl caffeate (EC). Different series of ILs with BF 4 - , TF 2 - , and PF 6 - were screened and compared, and the effects of transesterification variables [temperature (60-100 °C) enzyme concentration (10-90 mg/mL), substrate molar ratio (CO/EC, 1:1-5:1), water load (0-8%), and reaction pressure] were also investigated. Results showed that, in the IL system, hydrophilic and lipophilic products were formed by two competitive reactions [(i) hydrolysis + transesterification and (ii) transesterification]. The maximum hydrophilic caffeoyl lipids yield (26.10 ± 0.28%) and reaction selectivity for hydrophilic caffeoyl lipids (0.4) was achieved in BMIMPF₆ system. The increases of substrate ratio (molar ratio of CO to EC, from 1:1 to 5:1), water load (from 0 to 8%), and enzyme concentration (from 10 to 90 mg/mL) were in favor of hydrophilic caffeoyl lipid formation. However, the vacuum system and high temperature (from 70 to 100 °C) are favorable for lipophilic caffeoyl lipids formation. Under the optimal reaction conditions (90 °C, 75 mg/mL enzyme concentration, substrate ratio 3:1, 60 h, and 10 mmHg vacuum pressures), the maximum EC conversion was 72.48 ± 2.67%. The activation energies of the transesterification, and the selective formations of lipophilic and hydrophilic products were calculated as 44.55, 47.65, and 54.96 kJ/mol, respectively.

Catalytic characteristics of a sn-1(3) regioselective lipase from Cordyceps militaris

A total of 39 agricultural products were screened for natural sources of lipases with distinctive positional specificity. Based on this, Cordyceps militaris lipase (CML) was selected and subsequently purified by sequential chromatography involving anion-exchange, hydrophobic-interaction, and gel-permeation columns. As a result of the overall purification procedure, a remarkable increase in the specific activity of the CML (4.733 U/mg protein) was achieved, with a yield of 2.47% (purification fold of 94.54). The purified CML has a monomeric structure with a molecular mass of approximately 62 kDa. It was further identified as a putative extracellular lipase from C. militaris by the partial sequence analysis using ESI-Q-TOF MS. In a kinetic study of the CML-catalyzed hydrolysis, the values of V_max , K_m , and k_cat were determined to be 4.86 μmol·min^-1 ·mg^-1 , 0.07 mM, and 0.29 min^-1 , respectively. In particular, the relatively low K_m value indicated that CML has a high affinity for its substrate. With regard to positional specificity, CML selectively cleaved triolein at the sn-1 or 3 positions of glycerol backbone, releasing 1,2(2,3)-diolein as the major products. Therefore, CML can be considered a distinctive biocatalyst with sn-1(3) regioselectivity. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2744, 2019.

Screening of novel feruloyl esterases from Talaromyces wortmannii for the development of efficient and sustainable syntheses of feruloyl derivatives

The feruloyl esterases Fae125, Fae7262 and Fae68 from Talaromyces wortmannii were screened in 10 different solvent: buffer systems in terms of residual hydrolytic activity and of the ability for the transesterification of vinyl ferulate with prenol or l-arabinose. Among the tested enzymes, the acetyl xylan-related Fae125 belonging to the phylogenetic subfamily 5 showed highest yield and selectivity for both products in alkane: buffer systems (n-hexane or n-octane). Response surface methodology, based on a 5-level and 6-factor central composite design, revealed that the substrate molar ratio and the water content were the most significant variables for the bioconversion yield and selectivity. The effect of agitation, the possibility of DMSO addition and the increase of donor concentration were investigated. After optimization, competitive transesterification yields were obtained for prenyl ferulate (87.5-92.6%) and l-arabinose ferulate (56.2-61.7%) at reduced reaction times (≤24 h) resulting in good productivities (>1 g/L/h, >300 kg product/kg FAE). The enzyme could be recycled for six consecutive cycles retaining 66.6% of the synthetic activity and 100% of the selectivity.

Tailoring the specificity of the type C feruloyl esterase FoFaeC from Fusarium oxysporum towards methyl sinapate by rational redesign based on small molecule docking simulations

The type C feruloyl esterase FoFaeC from Fusarium oxysporum is a newly discovered enzyme with high potential for use in the hydrolysis of lignocellulosic biomass but it shows low activity towards sinapates. In this work, small molecule docking simulations were employed in order to identify important residues for the binding of the four model methyl esters of hydroxycinnamic acids, methyl ferulate/caffeate/sinapate/p-coumarate, to the predicted structure of FoFaeC. Subsequently rational redesign was applied to the enzyme’ active site in order to improve its specificity towards methyl sinapate. A double mutation (F230H/T202V) was considered to provide hydrophobic environment for stabilization of the methoxy substitution on sinapate and a larger binding pocket. Five mutant clones and the wild type were produced in Pichia pastoris and biochemically characterized. All clones showed improved activity, substrate affinity, catalytic efficiency and turnover rate compared to the wild type against methyl sinapate, with clone P13 showing a 5-fold improvement in catalytic efficiency. Although the affinity of all mutant clones was improved against the four model substrates, the catalytic efficiency and turnover rate decreased for the substrates containing a hydroxyl substitution.

Evolution of the feruloyl esterase MtFae1a from Myceliophthora thermophila towards improved catalysts for antioxidants synthesis

The chemical syntheses currently employed for industrial purposes, including in the manufacture of cosmetics, present limitations such as unwanted side reactions and the need for harsh chemical reaction conditions. In order to overcome these drawbacks, novel enzymes are developed to catalyze the targeted bioconversions. In the present study, a methodology for the construction and the automated screening of evolved variants library of a Type B feruloyl esterase from Myceliophthora thermophila (MtFae1a) was developed and applied to generation of 30,000 mutants and their screening for selecting the variants with higher activity than the wild-type enzyme. The library was generated by error-prone PCR of mtfae1a cDNA and expressed in Saccharomyces cerevisiae. Screening for extracellular enzymatic activity towards 4-nitrocatechol-1-yl ferulate, a new substrate developed ad hoc for high-throughput assays of feruloyl esterases, led to the selection of 30 improved enzyme variants. The best four variants and the wild-type MtFae1a were investigated in docking experiments with hydroxycinnamic acid esters using a model of 3D structure of MtFae1a. These variants were also used as biocatalysts in transesterification reactions leading to different target products in detergentless microemulsions and showed enhanced synthetic activities, although the screening strategy had been based on improved hydrolytic activity.

Insights into substrate binding of ferulic acid esterases by arabinose and methyl hydroxycinnamate esters and molecular docking

Ferulic acid esterases (FAE, EC 3.1.1.73) cleave the arabinose hydroxycinnamate ester in plant hemicellulose and other related substrates. FAE are commonly categorised as type A-D based on catalytic activities towards model, short alkyl chain esters of hydroxycinnamates. However, this system correlates poorly with sequence and structural features of the enzymes. In this study, we investigated the basis of the type A categorisation of an FAE from Aspergillus niger, AnFaeA, by comparing its activity toward methyl and arabinose hydroxycinnamate esters. k_cat/K_m ratios revealed that AnFaeA hydrolysed arabinose ferulate 1600-fold, and arabinose caffeate 6.5 times more efficiently than their methyl ester counterparts. Furthermore, small docking studies showed that while all substrates adopted a catalytic orientation with requisite proximity to the catalytic serine, methyl caffeate and methyl p-coumarate preferentially formed alternative non-catalytic conformations that were energetically favoured. Arabinose ferulate was unable to adopt the alternative conformation while arabinose caffeate preferred the catalytic orientation. This study demonstrates that use of short alkyl chain hydroxycinnnamate esters can result in activity misclassification. The findings of this study provide a basis for developing a robust classification system for FAE and form the basis of sequence-function relationships for this class.