Bioreactors based on immobilized fungi: bioremediation under non-sterile conditions

The potential of white-rot fungi for algal control: Mechanisms, Strategies, and Challenges

As human society and industrialization have progressed, harmful algal blooms have contributed to global ecological pollution which makes the development of a novel and effective algal control strategy imminent. This is because existing physical and chemical methods for dealing with the problem have issues like cost and secondary pollution. Benefiting from their environmentally friendly and biocompatible properties, white-rot fungi (WRF) have been studied to control algal growth. WRF control algae by using algae for carbon or nitrogen, antagonism, and enhancing allelopathies. It can be better applied to practice by immobilization. This paper reviews the mechanism for WRF control of algae growth and its practical application. It demonstrates the limitations of WRF controlling algae growth and aids the further study of biological methods to regulate eutrophic water in algae growth research. In addition, it provides theoretical support for the fungi controlling algae growth.

Bioremediation efficiency of free and immobilized form of Aspergillus niger and Aspergillus tubigenesis biomass on tannery effluent

Untreated tannery effluent discharge, which causes severe environmental pollution. This research was performed to assess the bioremediation (multi-pollutant adsorption) potential of pre-identified and multi metal tolerant Aspergillus niger and Aspergillus tubigenesis through a stirred tank bioreactor in free and immobilized form. Physicochemical property analysis results showed that most of the tannery effluent properties were beyond the permissible limits. These A. niger and A. tubigenesis effectively immobilized on corncob and coir solid support material. The stirred tank bioreactor based bioremediation study revealed that the fungal biomass (Aspergillus niger and Aspergillus tubigenesis) immobilized coir and corncob material demonstrated remarkable multi-pollutant (TSS: 22.5% & 13.5%, TS: 29% & 22%, BOD: 21% & 10%, TDS: 28% & 19%, COD: 30% & 22%, Cr: 27% & 19%, Cu: 28% & 12%, and Pb: 48% & 29% respectively) adsorption potential in a week of treatment. Moreover, it reduced the toxicity of tannery effluent and promotes the sprouting of Oriza sativa seeds, as demonstrated by petri plate bioassay. These finding suggest that the metal-tolerant fungal isolates A. niger and A. tubigenesis demonstrated impressive bioremediation proficiencies in an immobilized state. A field investigation is required to assess the feasibility of this strategy on tannery effluent.

Heterogeneous biocatalytic system for effective decolorization of textile dye effluent

The current physicochemical methods for decolorizing toxic synthetic dyes are not sustainable to halt the environmental damage as they are expensive and often produce concentrated sludge, which may lead to secondary disposal problems. Biocatalysis (microbes and/or their enzymes) is a cost-effective, versatile, energy-saving and clean alternative. The most common enzymes involved in dye degradation are laccases, azoreductases and peroxidases. Toxic dyes could be converted into less harmful byproducts through the combined action of many enzymes or the utilization of whole cells. The action of whole cells to treat dye effluents is either by biosorption or degradation (aerobic or anaerobic). Using immobilized cells or enzymes will offer advantages such as superior stability, persistence against harsh environmental conditions, reusability and longer half-lives. This review envisages the recent strategies of immobilization and bioreactor considerations with the immobilized system as the effective treatment of textile dye effluents. Packed bed reactors are the most popular heterogeneous biocatalytic reactors for dye decolorization due to their efficiency and cost-effectiveness.

Filamentous fungi for sustainable remediation of pharmaceutical compounds, heavy metal and oil hydrocarbons

This review presents a comprehensive summary of the latest research in the field of bioremediation with filamentous fungi. The main focus is on the issue of recent progress in remediation of pharmaceutical compounds, heavy metal treatment and oil hydrocarbons mycoremediation that are usually insufficiently represented in other reviews. It encompasses a variety of cellular mechanisms involved in bioremediation used by filamentous fungi, including bio-adsorption, bio-surfactant production, bio-mineralization, bio-precipitation, as well as extracellular and intracellular enzymatic processes. Processes for wastewater treatment accomplished through physical, biological, and chemical processes are briefly described. The species diversity of filamentous fungi used in pollutant removal, including widely studied species of Aspergillus, Penicillium, Fusarium, Verticillium, Phanerochaete and other species of Basidiomycota and Zygomycota are summarized. The removal efficiency of filamentous fungi and time of elimination of a wide variety of pollutant compounds and their easy handling make them excellent tools for the bioremediation of emerging contaminants. Various types of beneficial byproducts made by filamentous fungi, such as raw material for feed and food production, chitosan, ethanol, lignocellulolytic enzymes, organic acids, as well as nanoparticles, are discussed. Finally, challenges faced, future prospects, and how innovative technologies can be used to further exploit and enhance the abilities of fungi in wastewater remediation, are mentioned.

Response of microbial community to the remediation of neonicotinoid insecticide imidacloprid contaminated wetland soil by Phanerochaete chrysosporium

Imidacloprid (IMI), a typic neonicotinoid insecticide, is widely used and persist in soils with long half-time causing serious threat to ecosystem and human health. It is urgent to develop suitable and effective methods to accelerate it degradation and alleviate its negative impacts in soil. In this study, the introduction of functional microbe white-rot fungus Phanerochaete chrysosporium to remediate IMI contaminated wetland soil was carried out. The remediation performance and the response of the soil microbial community were examined. The results showed that P. chrysosporium could improve the degradation of IMI in soil no matter the soil was sterilized or not. The bioaugmentation was especially observed in non-sterilized soil under the inoculation patterns of FE and SP with the maximum IMI degradation rate of 91% and 93% in 7 days, respectively. The invertase activity in soil was also enhanced with P. chrysosporium inoculation. Microbial community analysis revealed that P. chrysosporium inoculation could increase the diversity and richness of bacterial community, and stimulate some IMI degraders genera including Ochrobactrum, Leifsonia, Achromobacter, and Bacillus. Moreover, the xenobiotic degradation and metabolism pathway was generally enhanced with P. chrysosporium inoculation based on PICRUSt analysis. These obtained results demonstrated that the introduction of white-rot fungus is of great potentially enabling the remediation of neonicotinoids contaminated soil.

Sequential fungal pretreatment of unsterilized Miscanthus: changes in composition, cellulose digestibility and microbial communities

A sequential fungal pretreatment of Miscanthus × giganteus was conducted by mixing unsterilized Miscanthus with material previously colonized with the white-rot fungus Ceriporiopsis subvermispora. For three generations, each generation started with inoculation by mixing unsterilized fresh Miscanthus with end material from the previous generation and ended after 28 days of incubation at 28 °C. After the first generation, the cellulose digestibility of the material doubled, compared to that of the unsterilized Miscanthus, but the second and third generations showed no enhancements in cellulose digestibility. Furthermore, high degradation of Miscanthus structural carbohydrates occurred during the first generation. A microbial community study showed that, even though the fungal community of the material previously colonized by C. subvermispora was composed mainly of this fungus (> 99%), by the first generation its relative abundance was down to only 9%, and other microbes had prevailed. Additionally, changes in the bacterial community occurred that might be associated with unwanted cellulose degradation in the system. This reiterates the necessity of feedstock microbial load reduction for the stability and reproducibility of fungal pretreatment of lignocellulosic biomass. KEY POINTS: • Sequential fungal pretreatment of unsterilized Miscanthus was unsuccessful. • Feedstock changes with white-rot fungi favored the growth of other microorganisms. • Feedstock microbial reduction is necessary for pretreatment with C. subvermispora.

Ligninolytic enzymes in Basidiomycetes and their application in xenobiotics degradation

Variety of microorganisms have already proven their capabilities for degradation of wide range of wastes with anthropogenic nature. These pollutants, both liquid and solids, also include so called xenobiotics like phenol and its derivatives, PAHs, dyes, pesticides, pharmaceuticals, etc. Xenobiotics as bisphenol A (BPA), chlorhexidine (CHX), octenidine (OCT), other disinfectants and antiseptics have high ecotoxicological impact. Moreover, they can also impair our quality of life and our health interfering different metabolic and hormone receptors pathways in human body. Chemical treatment of such wastes is not a viable option because of its poor socio-economics and environmental merits. Therefore, applying effective, ecofriendly and cheap treatment methods is of great importance. Basidiomycetes are extensively investigated for their abilities to degrade numerous pollutants and xenobiotics. Through their extracellular ligninolytic enzymes they are capable of reducing or completely removing wide range of hazardous compounds. These enzymes can be categorized in two groups: oxidases (laccase) and peroxidases (manganese peroxidase, lignin peroxidase, versatile peroxidase). Due to the broad substrate specificity of the secreted enzymes Basidiomycetes can be applied as a powerful tool for bioremediation of diverse xenobiotics and recalcitrant compounds.

Bibliometric analysis of global research on white rot fungi biotechnology for environmental application

In recent years, white rot fungi (WRFs) have received tremendous attention as a biotechnological tool for environmental pollution control. In order to systematically and comprehensively describe the progress, trends, and hotspots of WRF biotechnology in the field of environmental pollution control, the 3967 related publications from 2003 to 2020 were collected from Web of Science Core Collection database, and the bibliometric characteristics including publication output, country, institution, journal, author, citation frequency, h-index, and research focus were evaluated by using Excel 2007, CiteSpace V, and VOSviewer. The results indicated that the number of research publications increased rapidly before 2009, but after that, the number of publications fluctuated in a certain range. China and USA were the most productive countries and the most active country in international cooperation. In this field, most authors tend to cooperate within a small group. The journal and subject category with the largest number of publications are "International Biodeterioration & Biodegradation" and "Biotechnology Applied Microbiology", respectively. The analysis of high-frequency keywords revealed that "laccase", "biodegradation", "decolorization", and "Phanerochaete chrysosporium" were the most cited terms among all publications. The pretreatment of biomass waste, decolorization of dye wastewater, and bioremediation of polluted environment are the key research directions of WRF biotechnology. Finally, the frontier topics and active authors in this research field were identified using burst detection. We believe that this bibliometric study provides a comprehensive and systematic overview and promoted the future cooperative research and knowledge exchange in this field of WRF biotechnology for environmental applications.

Combined biostimulation and bioaugmentation for chlorpyrifos degradation in laboratory microcosms

Chlorpyrifos (CP) is a persistent organophosphorus pesticide (OP) used in soil ecosystem for insect control. Bioremediation process has been proven promising in degrading these toxic molecules and restoring the physio-chemical properties of soil. This work reports a laboratory microcosm study in both non-sterile & sterile conditions, conducted over a period of 56 days to examine the combined effect of additional supplements like biostimulants (BSs) such as N, P, and K in the presence of suitable carrier materials (compost, wheat straw, and corncob) along with bioaugmentation by a Ochrobactrum sp. CPD-03 on CP degradation from the contaminated soil. CP degradation was thoroughly monitored at an interval of 7 days over a period of 56 days. Results showed biostimulation and bioaugmentation along with compost as carrier material had shown higher CP degradation efficiency of 76 ± 2.8 and 74 ± 1.6% in non-sterile and sterile microcosms over a period of 56 days. Moreover, bacterial community profiling (16s rRNA and opd gene) demonstrated increased microbial counts, corroborating the efficiency of the bioremediation process. The survival of CPD-03 at the end of the assay validated its ability of colonizing modified soils. By this integrated method with compost as carrier material, bioremediation process could be enhanced for restoration CP-contaminated soils.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02980-9.

Tannery Wastewater Recalcitrant Compounds Foster the Selection of Fungi in Non-Sterile Conditions: A Pilot Scale Long-Term Test

This study demonstrated that a microbial community dominated by fungi can be selected and maintained in the long-term under non-sterile conditions, in a pilot-scale packed-bed reactor fed with tannery wastewater. During the start-up phase, the reactor, filled with 0.6 m³ of polyurethane foam cubes, was inoculated with a pure culture of Aspergillus tubingensis and Quebracho tannin, a recalcitrant compound widely used by tannery industry, was used as sole carbon source in the feeding. During the start-up, fungi grew attached as biofilm in carriers that filled the packed-bed reactor. Subsequently, the reactor was tested for the removal of chemical oxygen demand (COD) from an exhaust tanning bath collected from tanneries. The entire experiment lasted 121 days and average removals of 29% and 23% of COD and dissolved organic carbon (DOC) from the tannins bath were achieved, respectively. The evolution of the microbial consortium (bacteria and fungi) was described through biomolecular analyses along the experiment and also developed as a function of the size of the support media.

Fungi and biochar applications in bioremediation of organic micropollutants from aquatic media

The conventional wastewater treatment system such as bacteria, is not able to remove recalcitrant micropollutants effectively. While, fungi have shown high capacity in degradation of recalcitrant compounds. Biochar, on the other hand, has gained attention in water and wastewater treatment as a low cost and sustainable adsorbent. This paper aims to review the recent applications of three major fungal divisions including Basidiomycota, Ascomycota, and Mucoromycotina, in organic micropollutants removal from wastewater. Moreover, it presents an insight into fungal bioreactors, fungal biofilm and immobilization system. Biochar adsorption capacities for organic micropollutants removal under different operating conditions are summarized. Finally, few recommendations for further research are established in the context of the combination of fungal biofilm with the technologies relying on the adsorption by porous carbonaceous materials.

White rot fungi can be a promising tool for removal of bisphenol A, bisphenol S, and nonylphenol from wastewater

Endocrine-disrupting chemicals (EDC) are a wide group of chemicals that interfere with the endocrine system. Their similarity to natural steroid hormones makes them able to attach to hormone receptors, thereby causing unfavorable health effects. Among EDC, bisphenol A (BPA), bisphenol S (BPS), and nonylphenol (NP) seem to be particularly harmful. As the industry is experiencing rapid expansion, BPA, BPS, and NP are being produced in growing amounts, generating considerable environmental pollution. White rot fungi (WRF) are an economical, ecologically friendly, and socially acceptable way to remove EDC contamination from ecosystems. WRF secrete extracellular ligninolytic enzymes such as laccase, manganese peroxidase, lignin peroxidase, and versatile peroxidase, involved in lignin deterioration. Owing to the broad substrate specificity of these enzymes, they are able to remove numerous xenobiotics, including EDC. Therefore, WRF seem to be a promising tool in the abovementioned EDC elimination during wastewater treatment processes. Here, we review WRF application for this EDC removal from wastewater and indicate several strengths and limitations of such methods.

The role of cosubstrate and mixing on fungal biofilm efficiency in the removal of tannins

Tannins are polyphenolic compounds produced by plants and they are used in industrial vegetable tanning of leather. Tannins represent one of the low biodegradability substances in tannery wastewaters with high recalcitrant soluble chemical oxygen demand, furthermore high concentration of tannins can inhibit biological treatment. In the present study, four novel rotating submerged packed bed reactors were inoculated with a selected fungal strain to reach a biological degradation of tannins in non-sterile conditions. The selected fungal strain, Aspergillus tubingensis MUT 990, was immobilised in polyurethane foam cubes carriers and inserted inside a submerged rotating cage reactors. The reactors were feed with a solution composed of four tannins: Quebracho (Schinopsis spp.), Wattle (Mimosa spp.), Chestnut (Castanea spp.) and Tara (Caesalpinia spp.). Four reactors with a volume of 4 L each were used, the co-substrate was pure malt extract, the hydraulic retention time was 24 h and the pH setpoint was 5.5. The reactors configuration was chosen to allow the study of the effect of rotation and the co-substrate addition on tannins removal. The experiment lasted two months and it was achieved 80% of chemical oxygen demand and up to 90% dissolved organic carbon removal, furthermore it was detected an important tannase activity.

Silk-based microcarriers: current developments and future perspectives

Cell-seeded microcarriers (MCs) are currently one of the most promising topics in biotechnology. These systems are supportive structures for cell growth and expansion that allow efficient nutrient and gas transfer between the media and the attached cells. Silk proteins have been increasingly used for this purpose in the past few years due to their biocompatibility, biodegradability and non-toxicity. To date, several silk fibroin spherical MCs in combination with alginate, gelatin and calcium phosphates have been reported with very interesting outcomes. In addition, other silk-based three-dimensional structures such as microparticles with chitosan and collagen, as well as organoids, have been increasingly studied. In this study, the physicochemical and biological properties of these biomaterials, as well as the recent methodologies for their processing and for cell culture, are discussed. The potential biomedical applications are also addressed. In addition, an analysis of the future perspectives is presented, where the potential of innovative silk-based MCs processing technologies is highlighted.

Application of Arjuna (Terminalia arjuna) seed biochar in hybrid treatment system for the bioremediation of Congo red dye

In the present study, a hybrid treatment system (biological and ozonation) was developed and used in the decolorization of Congo red (CR) dye. The biological treatment was performed in packed bed bioreactor (PBBR) containing Arjuna (Terminalia Arjuna) seeds biochar immobilized with Providencia stuartii, whereas ozonation was carried out in an ozone reactor. The process variables such as temperature, process time, and inoculum size were optimized and found to be 30 °C, 2 48 h, and 3 × 10⁵ CFU/mL, respectively with 92.0 ± 5.0% of dye decolorization. Furthermore, biologically treated effluent was subject to ozone treatment for the decolorization of the remaining CR dye. The hybrid approach reveals almost complete decolorization of Congo red (CR) dye. The kinetic study of microbial growth was examined by Monod model. In addition, the cost analysis estimation for the removal of CR dye was done, and removal per liter was found to be economic.

Respirometric techniques coupled with laboratory-scale tests for kinetic and stoichiometric characterisation of fungal and bacterial tannin-degrading biofilms

In environmental biotechnology applications for wastewater treatment, bacterial-based bioprocesses are mostly implemented; on the contrary, the application of fungal-based bioprocesses, is still challenging under non-sterile conditions. In a previous laboratory-scale study, we showed that when specific tannins are used as the sole carbon source, fungi can play a key role in the microbial community, under non-sterile conditions and in the long term. In a previous study, an engineered ecosystem, based on fungal tannin biodegradation, was successfully tested in a laboratory-scale bioreactor under non-sterile conditions. In the present study, a kinetic and stoichiometric characterisation of the biomass developed therein was performed through the application of respirometric techniques applied to the biomass collected from the above-mentioned reactor. To this aim, a respirometric set-up was specifically adapted to obtain valuable information from tannin-degrading fungal biofilms. A mathematical model was also developed and applied to describe both the respirometric profiles and the experimental data collected from the laboratory-scale tests performed in the bioreactor. The microbial growth was described through a Monod-type kinetic equation as a first approach. Substrate inhibition, decay rate and tannin hydrolysis process were included to better describe the behaviour of immobilised biomass selected in the tannin-degrading bioreactor. The model was implemented in AQUASIM using the specific tool Biofilm Compartment to simulate the attached fungal biofilm. Biofilm features and transport parameters were either measured or assumed from the literature. Key kinetic and stoichiometric unknown parameters were successfully estimated, overcoming critical steps for scaling-up a novel fungal-based technology for tannins biodegradation.

Advanced biological sequential treatment of mature landfill leachate using aerobic activated sludge SBR and fungal bioreactor

This study utilized Penicillium spp. to treat mature landfill leachate (MLL) in a continuous bioreactor and batch experimental tests under non-sterile conditions. MLL characteristics such as chemical oxygen demand (COD), soluble COD (sCOD), total carbon (TC), total organic carbon (TOC), and color removal efficiency were determined. The lignocellulosic enzymatic activity of laccase (Lac), lignin-peroxidase (LiP), and manganese-peroxidase (MnP) was also determined. The batch experimental test was carried out with raw and pretreated MLL containing the initial NH4 +-N concentrations of 0, 105, 352, and 914 mg/L. A maximum COD reduction of 41% and maximum enzymatic activity of 193, 37, and 25 U/L for Lac, LiP and MnP was recorded for the MLL containing 352 mg/L NH4 +-N. The continuous bioreactor exhibited maximum values of 52, 54, 60, 58, and 75 percentage of COD, sCOD, TC, TOC, and color removal efficiency with MLL containing 352 mg/L NH4 +-N that was pretreated at HRT 120 h, while the maximum detected lignocellulosic enzymatic activities were 149, 27, and 16 U/L for Lac, LiP, and MnP, respectively. A total of 64% COD reduction was achieved from the raw MLL considering 12% COD and 100% NH4 +-N reduction in the aerobic activated sludge sequencing batch reactor pretreatment process. The steady and higher removal efficiency of the bioreactor over the entire study period is promising for further exploration to enhance removal of refractory contaminants from the MLL.

Fungi as potential tool for polluted port sediment remediation

Contaminated sediments represent an important management problem that also concerns their remediation. Indeed, port dredging activities produce huge volumes of contaminated sediments that, in turn, require proper handling because of their quantity of inorganic and organic substances. Conventional management-remediation strategies of polluted sediment involve sediment washing, electron-chemical separation, and thermal treatment. Recently, bioremediation strategies have also been proposed as a promising answer to the problem of contaminated sediments. In this context, fungi are pioneer microorganisms known to bioconcentrate, bioaccumulate, and biostabilize heavy metals. These capabilities suggest the potential to employ indigenous fungal strains to remediate polluted port sediments. In the framework of the European Project SEDITERRA (Guidelines for the sustainable treatment of dredged sediments in the Marittimo area), the aim of this paper is to characterize the fungal communities of port sediments of Genoa and present an innovative mycoremediation protocol to evaluate the capability of indigenous fungal strains in the heavy metal remediation. In this study, Penicillium expansum Link and Paecilomyces formosus (Sakag., May. Inoue & Tada) Houbraken & Samson have been selected as fungal species for the mycoremediation treatments. The protocol requires a fungal membrane system and the results highlight efficient bioremoval of Cu and Zn from sediments.

Chromium tolerance and accumulation in Aspergillus flavus isolated from tannery effluent

Cr(VI) tolerance in Aspergillus flavus, strain SFL, isolated from tannery effluent was measured and compared with a reference strain of A. flavus, A1120. On solid medium, SFL had a high level of Cr(VI) tolerance (1,600 mg/L), which was 16 times that of A1120 and greater than most previously analyzed fungal strains. When in 100 mg/L of Cr(VI), SFL completely depleted Cr(VI) within 72 h while A1120 depleted 85% of Cr(VI). SFL was more effective in reducing extracellular Cr(VI) than A1120. While A1120 showed greater biosorption of Cr(VI) than SFL, intracellular accumulation was approximately 50% greater in SFL and was more energy-dependent than A1120. Cr(VI) modified the external surface of the hyphae. Cr speciation detected the presence of only Cr(III), corresponding to Cr(OH)₃ , which precipitated on the hyphal surface. Cr(VI) bound to the functional groups carboxyl, amine, and hydroxyl in both SFL and A1120. Transmission electron microscopy energy-dispersive X-ray detected Cr on the fungal wall and within membrane-bound organelles of the cytoplasm. In conclusion, the greater tolerance of SFL to Cr(VI) relative to A1120 is due to more effective energy-dependant uptake of Cr(VI) into the cell and increased capacity of SFL to store Cr in intracellular vacuoles compared with A1120.

Biodegradation of methylene blue dye in a batch and continuous mode using biochar as packing media

Bacterial species for metabolizing dye molecules were isolated from dye rich water bodies. The best microbial species for such an application was selected amongst the isolated bacterial populations by conducting methylene blue (MB) batch degradation studies with the bacterial strains using NaCl-yeast as a nutrient medium. The most suitable bacterial species was Alcaligenes faecalis (A. faecalis) according to 16S rDNA sequencing. Process parameters were optimized and under the optimum conditions (e.g., inoculum size of 3 mL, temperature of 30 °C, 150 ppm, and time of 5 days), 96.2% of MB was removed. Furthermore, the effectiveness for the separation of MB combining bio-film with biochar was measured by a bio-sorption method in a packed bed bioreactor (PBBR) in which microbes was immobilized. The maximum MB removal efficiencies, when tested with 50 ppm dye using batch reactors containing free A. faecalis cells and the same cells immobilized on the biochar surface, were found to be 81.5% and 89.1%, respectively. The PBBR operated in continuous recycle mode at high dye concentration of 500 ppm provided 87.0% removal of MB through second-order kinetics over 10 days. The % removal was found in the order of PBBR>Immobilized batch>Free cell. The standalone biochar batch adsorption of MB can be described well by the pseudo-second order kinetics (R² ≥ 0.978), indicating the major contribution of electron exchange-based valence forces in the sorption of MB onto the biochar surface. The Langmuir isotherm suggested a maximum monolayer adsorption capacity of 4.69 mg g^-1 at 40 °C which was very close to experimentally calculated value (4.97 mg g^-1). Moreover, the Casuarina seed biochar was reusable 5 times.

Biotransformation of industrial tannins by filamentous fungi

Tannins are secondary metabolites that are widely distributed in the plant kingdom. They act as growth inhibitors for many microorganisms: they are released upon microbial attack, helping to fight infection in plant tissues. Extraction of tannins from plants is an active industrial sector with several applications, including oenology, animal feeding, mining, the chemical industry, and, in particular, the tanning industry. However, tannins are also considered very recalcitrant pollutants in wastewater of diverse origin. The ability to grow on plant substrates rich in tannins and on industrial tannin preparations is usually considered typical of some species of fungi. These organisms are able to tolerate the toxicity of tannins thanks to the production of enzymes that transform or degrade these substrates, mainly through hydrolysis and oxidation. Filamentous fungi capable of degrading tannins could have a strong environmental impact as bioremediation agents, in particular in the treatment of tanning wastewaters.

Bioremediation of Landfill Leachate with Fungi: Autochthonous vs. Allochthonous Strains

Autochthonous fungi from contaminated wastewater are potential successful agents bioremediation thanks to their adaptation to pollutant toxicity and to competition with other microorganisms present in wastewater treatment plant. Biological treatment by means of selected fungal strains could be a potential tool to integrate the leachate depuration process, thanks to their fungal extracellular enzymes with non-selective catalytical activity. In the present work, the treatability of two real samples (a crude landfill leachate and the effluent coming from a traditional wastewater treatment plant) was investigated in decolorization experiments with fungal biomasses. Five autochthonous fungi, Penicillium brevicompactum MUT 793, Pseudallescheria boydii MUT 721, P. boydii MUT 1269, Phanerochaete sanguinea MUT 1284, and Flammulina velutipes MUT 1275, were selected in a previous miniaturized decolorization screening. Their effectiveness in terms of decolorization, enzymatic activity (laccases and peroxidases), biomass growth and ecotoxicity removal was compared with that of five allochthonous fungal strains, Pleurotus ostreatus MUT 2976, Porostereum spadiceum MUT 1585, Trametespubescens MUT 2400, Bjerkanderaadusta MUT 3060 and B. adusta MUT 2295, selected for their well known capability to degrade recalcitrant pollutants. Moreover, the effect of biomass immobilization on polyurethane foam (PUF) cube was assessed. The best decolorization (60%) was achieved by P. spadiceum MUT 1585, P. boydii MUT 721 and MUT 1269. In the first case, the DP was achieved gradually, suggesting a biodegradation process with the involvement of peroxidases. On the contrary, the two autochthonous fungi seem to bioremediate the effluent mainly by biosorption, with the abatement of the toxicity (up to 100%). The biomass immobilization enhanced enzymatic activity, but not the DP. Moreover, it limited the biomass growth for the fast growing fungi, MUT 721 and MUT 1269. In conclusion, robust and versatile strains coming from well-characterized collections of microorganisms can obtain excellent results comparing and even exceeding the bioremediation yields of strains already adapted to pollutants.