Metabolic engineering for the production of isoprene and isopentenol by Escherichia coli

Prenol production in a microbial host via the "Repass" Pathways

Prenol and isoprenol are promising advanced biofuels and serve as biosynthetic precursors for pharmaceuticals, fragrances, and other industrially relevant compounds. Despite engineering improvements that circumvent intermediate cytotoxicity and lower energy barriers, achieving high titer 'mevalonate (MVA)-derived' prenol has remained elusive. Difficulty in selective prenol production stems from the necessary isomerization of isopentenyl diphosphate (IPP) to dimethylallyl diphosphate (DMAPP) as well as the intrinsic toxicity of these diphosphate precursors. Here, the expression of specific isopentenyl monophosphate kinases with model-guided enzyme substitution of diphosphate isomerases and phosphatases enabled selective cycling of monophosphates and diphosphates, dramatically improving prenol titers and selectivity in Escherichia coli. Pairing this approach with the canonical MVA pathway resulted in 300 mg/L prenol at a 30:1 ratio with isoprenol. Further pairing with the "IPP-Bypass" pathway resulted in 526 mg/L prenol at a 72:1 ratio with isoprenol, the highest and purest MVA-derived prenol titer to date. Additionally, modifying this "IPP-Repass" for DMAPP production and coexpressing the prenyltransferase acPT1 yielded 48.3 mg/L of the potential therapeutic precursor drupanin from p-coumarate. These novel repass pathways establish a unique strategy for tuning diphosphate precursors to drive isoprenoid biosynthesis and prenylation reactions.

Producing multiple chemicals through biological upcycling of waste poly(ethylene terephthalate)

Poly(ethylene terephthalate) (PET) waste is of low degradability in nature, and its mismanagement threatens numerous ecosystems. To combat the accumulation of waste PET in the biosphere, PET bio-upcycling, which integrates chemical pretreatment to produce PET-derived monomers with their microbial conversion into value-added products, has shown promise. The recently discovered Rhodococcus jostii RPET strain can metabolically degrade terephthalic acid (TPA) and ethylene glycol (EG) as sole carbon sources, and it has been developed into a microbial chassis for PET upcycling. However, the scarcity of synthetic biology tools, specifically designed for this non-model microbe, limits the development of a microbial cell factory for expanding the repertoire of bioproducts from postconsumer PET. Herein, we describe the development of potent genetic tools for RPET, including two inducible and titratable expression systems for tunable gene expression, along with serine integrase-based recombinational tools (SIRT) for genome editing. Using these tools, we systematically engineered the RPET strain to ultimately establish microbial supply chains for producing multiple chemicals, including lycopene, lipids, and succinate, from postconsumer PET waste bottles, achieving the highest titer of lycopene ever reported thus far in RPET [i.e., 22.6 mg/l of lycopene, ~10 000-fold higher than that of the wild-type (WT) strain]. This work highlights the great potential of plastic upcycling as a generalizable means of sustainable production of diverse chemicals.

Coordinated gene expression and hormonal fluxes dictating ginsenoside Rb3 biosynthesis in floral development of Panax notoginseng

BACKGROUND

Panax notoginseng (PN) is a medicinal plant containing essential ginsenosides. Given the therapeutic significance of ginsenosides, we delved into the mechanisms of ginsenoside Rb3 biosynthesis in PN flowers. We examined this process from the pre-differentiation stage to the end of flowering, aiming to uncover the biochemical pathways underlying ginsenoside production in PN.

RESULTS

Budding stage (T2) was found critical for enhanced Rb3 production. Transcriptomic analysis revealed a marked shift in gene expression beginning at T2, with upregulation in pathways associated with secondary metabolite production. Gene set enrichment analysis (GSEA) illuminated the upregulation of genes involved in terpenoid backbone biosynthesis, amino acid degradation, and terpenoid modifications, specifically at T2. We correlated the fluctuating hormone levels with the activity of the transcription factor MYC2 to underscore hormonal influence on ginsenoside biosynthesis. Biosynthesis pathway reconstruction revealed the dominance of the mevalonate pathway. Critical enzymes such as ACAT, PPDS, DDS, and LUP4 were vital in precursor biosynthesis and modification. Notably, key genes such as HMGCS, FDPS, and DDS, as well as transcription factors MYC2, MYB124, and MYB61.1, showed a concerted surge in activity at T2.

CONCLUSIONS

These findings provide insights into the complex gene networks and molecular pathways that regulate ginsenoside biosynthesis, thereby promoting the medicinal properties of PN.

Screening and engineering of lycopene-producing strain Rhodococcus jostii for bio-upcycling of poly(ethylene terephthalate) waste

Poly(ethylene terephthalate) (PET) is a widely used plastic, but its improper disposal has caused serious environmental pollution. The development of bioconversion for PET waste into high-value chemicals has gained significant attention as an innovative solution. In this study, a novel guided screening strategy involving mixed-bacteria fermentation and partitioned purification (MBF) was proposed to first successful isolate Rhodococcus jostii LETBE 8896, a strain capable of naturally producing 4 μg/L of lycopene from PET hydrolysate. Transcriptomic analysis identified the methylerythritol 4-phosphate (MEP) pathway as key to lycopene biosynthesis, with IspG identified as a critical regulatory enzyme. R. jostii with ispG overexpression enhanced lycopene production, with 819 μg/L in the simulated PET hydrolysate and 650 μg/L in the PET hydrolysate. Additionally, the use of butylated hydroxytoluene (BHT) as an antioxidant significantly improved lycopene production at 1 L scale level, achieving a maximum yield of 1865 μg/L with a molar conversion rate of 50.36 % from the PET hydrolysate, the highest reported for PET hydrolysate to date. These findings highlight the dual potential of R. jostii as a chassis strain for high-value chemical production and as a sustainable solution for PET upcycling. This study provides a novel approach to plastic waste management, contributing to the circular economy and global sustainability goals.

Methanothermobacter thermautotrophicus and Alternative Methanogens: Archaea-Based Production

Methanogenic archaea convert bacterial fermentation intermediates from the decomposition of organic material into methane. This process has relevance in the global carbon cycle and finds application in anthropogenic processes, such as wastewater treatment and anaerobic digestion. Furthermore, methanogenic archaea that utilize hydrogen and carbon dioxide as substrates are being employed as biocatalysts for the biomethanation step of power-to-gas technology. This technology converts hydrogen from water electrolysis and carbon dioxide into renewable natural gas (i.e., methane). The application of methanogenic archaea in bioproduction beyond methane has been demonstrated in only a few instances and is limited to mesophilic species for which genetic engineering tools are available. In this chapter, we discuss recent developments for those existing genetically tractable systems and the inclusion of novel genetic tools for thermophilic methanogenic species. We then give an overview of recombinant bioproduction with mesophilic methanogenic archaea and thermophilic non-methanogenic microbes. This is the basis for discussing putative products with thermophilic methanogenic archaea, specifically the species Methanothermobacter thermautotrophicus. We give estimates of potential conversion efficiencies for those putative products based on a genome-scale metabolic model for M. thermautotrophicus.

Systematic metabolic engineering of Zymomonas mobilis for β-farnesene production

Zymomonas mobilis is an ethanologenic bacterium that can produce hopanoids using farnesyl pyrophosphate (FPP), which can be used as the precursor by β-farnesene synthase for β-farnesene production. To explore the possibility and bottlenecks of developing Z. mobilis for β-farnesene production, five heterologous β-farnesene synthases were selected and screened, and AaBFS from Artemisia annua had the highest β-farnesene titer. Recombinant strains with AaBFS driven by the strong constitutive promoter Pgap (Pgap-AaBFS) doubled its β-farnesene production to 25.73 ± 0.31 mg/L compared to the recombinant strain with AaBFS driven by Ptet (Ptet-AaBFS), which can be further improved by overexpressing the Pgap-AaBFS construct using the strategies of multiple plasmids (41.00 ± 0.40 mg/L) or genomic multi-locus integration (48.33 ± 3.40 mg/L). The effect of cofactor NADPH balancing on β-farnesene production was also investigated, which can be improved only in zwf-overexpressing strains but not in ppnK-overexpressing strains, indicating that cofactor balancing is important and sophisticated. Furthermore, the β-farnesene titer was improved to 73.30 ± 0.71 mg/L by overexpressing dxs, ispG, and ispH. Finally, the β-farnesene production was increased to 159.70 ± 7.21 mg/L by fermentation optimization, including the C/N ratio, flask working volume, and medium/dodecane ratio, which was nearly 13-fold improved from the parental strain. This work thus not only generated a recombinant β-farnesene production Z. mobilis strain but also unraveled the bottlenecks to engineer Z. mobilis for farnesene production, which will help guide the future rational design and construction of cell factories for terpenoid production in non-model industrial microorganisms.

Engineered Methylococcus capsulatus Bath for efficient methane conversion to isoprene

Isoprene has numerous industrial applications, including rubber polymer and potential biofuel. Microbial methane-based isoprene production could be a cost-effective and environmentally benign process, owing to a reduced carbon footprint and economical utilization of methane. In this study, Methylococcus capsulatus Bath was engineered to produce isoprene from methane by introducing the exogenous mevalonate (MVA) pathway. Overexpression of MVA pathway enzymes and isoprene synthase from Populus trichocarpa under the control of a phenol-inducible promoter substantially improved isoprene production. M. capsulatus Bath was further engineered using a CRISPR-base editor to disrupt the expression of soluble methane monooxygenase (sMMO), which oxidizes isoprene to cause toxicity. Additionally, optimization of the metabolic flux in the MVA pathway and culture conditions increased isoprene production to 228.1 mg/L, the highest known titer for methanotroph-based isoprene production. The developed methanotroph could facilitate the efficient conversion of methane to isoprene, resulting in the sustainable production of value-added chemicals.

Enhancement of isoprene production in engineered Synechococcus elongatus UTEX 2973 by metabolic pathway inhibition and machine learning-based optimization strategy

An engineered Synechococcus elongatus UTEX 2973-IspS.IDI is used to enhance isoprene production through geranyl diphosphate synthase (CrtE) inhibition and process parameters (light intensity, NaHCO3 and growth temperature) optimization approach. A cumulative isoprene production of 1.21 mg/gDCW was achieved with productivity of 12.6 μg/gDCW/h in culture supplemented with 20 μg/mL alendronate. This inhibition strategy improvises the cumulative isoprene production 5.76-fold in presence of alendronate. The maximum cumulative production of isoprene is observed to be 5.22 and 6.20 mg/gDCW (54.4 and 64.6 μg/gDCW/h) at statistical and artificial neural network genetic algorithm (ANN-GA) optimized conditions, respectively. The overall increase of isoprene production is found to be 29.52-fold using an integrated approach of inhibition and ANN-GA optimization in comparison to unoptimized cultures without alendronate. This study reveals that alendronate use as a potential inhibitor and machine learning based optimization is a better approach in comparison to statistical optimization to enhance the isoprene production.

Optimization of IspSib stability through directed evolution to improve isoprene production

Enzyme stability is often a limiting factor in the microbial production of high-value-added chemicals and commercial enzymes. A previous study by our research group revealed that the unstable isoprene synthase from Ipomoea batatas (IspSib) critically limits isoprene production in engineered Escherichia coli. Directed evolution was, therefore, performed in the present study to improve the thermostability of IspSib. First, a tripartite protein folding system designated as lac'-IspSib-'lac, which could couple the stability of IspSib to antibiotic ampicillin resistance, was successfully constructed for the high-throughput screening of variants. Directed evolution of IspSib was then performed through two rounds of random mutation and site-saturation mutation, which produced three variants with higher stability: IspSibN397V A476V, IspSibN397V A476T, and IspSibN397V A476C. The subsequent in vitro thermostability test confirmed the increased protein stability. The melting temperatures of the screened variants IspSibN397V A476V, IspSibN397V A476T, and IspSibN397V A476C were 45.1 ± 0.9°C, 46.1 ± 0.7°C, and 47.2 ± 0.3°C, respectively, each of which was higher than the melting temperature of wild-type IspSib (41.5 ± 0.4°C). The production of isoprene at the shake-flask fermentation level was increased by 1.94-folds, to 1,335 mg/L, when using IspSibN397V A476T. These findings provide insights into the optimization of the thermostability of terpene synthases, which are key enzymes for isoprenoid production in engineered microorganisms. In addition, the present study would serve as a successful example of improving enzyme stability without requiring detailed structural information or catalytic reaction mechanisms.IMPORTANCEThe poor thermostability of IspSib critically limits isoprene production in engineered Escherichia coli. A tripartite protein folding system designated as lac'-IspSib-'lac, which could couple the stability of IspSib to antibiotic ampicillin resistance, was successfully constructed for the first time. In order to improve the enzyme stability of IspSib, the directed evolution of IspSib was performed through error-PCR, and high-throughput screening was realized using the lac'-IspSib-'lac system. Three positive variants with increased thermostability were obtained. The thermostability test and the melting temperature analysis confirmed the increased stability of the enzyme. The production of isoprene was increased by 1.94-folds, to 1,335 mg/L, using IspSibN397V A476T. The directed evolution process reported here is also applicable to other terpene synthases key to isoprenoid production.

Engineering a mevalonate pathway in Halomonas bluephagenesis for the production of lycopene

Introduction

Red-colored lycopene has received remarkable attention in medicine because of its antioxidant properties for reducing the risks of many human cancers. However, the extraction of lycopene from natural hosts is limited. Moreover, the chemically synthesized lycopene raises safety concerns due to residual chemical reagents. Halomonas bluephagenesis is a versatile chassis for the production of fine chemicals because of its open growth property without sterilization.

Methods

A heterologous mevalonate (MVA) pathway was introduced into H. bluephagenesis strain TD1.0 to engineer a bacterial host for lycopene production. A pTer7 plasmid mediating the expression of six MVA pathway genes under the control of a phage P_Mmp1 and an Escherichia coli P_trc promoters and a pTer3 plasmid providing lycopene biosynthesis downstream genes derived from Streptomyces avermitilis were constructed and transformed into TD1.0. The production of lycopene in the engineered H. bluephagenesis was evaluated. Optimization of engineered bacteria was performed to increase lycopene yield.

Results

The engineered TD1.0/pTer7-pTer3 produced lycopene at a maximum yield of 0.20 mg/g dried cell weight (DCW). Replacing downstream genes with those from S. lividans elevated the lycopene production to 0.70 mg/g DCW in the TD1.0/pTer7-pTer5 strain. Optimizing the P_Mmp1 promoter in plasmid pTer7 with a relatively weak P_trc even increased the lycopene production to 1.22 mg/g DCW. However, the change in the P_trc promoter in pTer7 with P_Mmp1 did not improve the yield of lycopene.

Conclusion

We first engineered an H. bluephagenesis for the lycopene production. The co-optimization of downstream genes and promoters governing MVA pathway gene expressions can synergistically enhance the microbial overproduction of lycopene.

Isolation and functional characterization of novel isoprene synthase from Artocarpus heterophyllus (jackfruit)

Isoprene, a Natural Volatile Organic Compound (NVOC) is one of the chief by-products of plant metabolism with important applications in the synthesis of rubber and pharmaceuticals as a platform molecule. Isoprene was obtained earlier from petroleum sources; however, to synthesise it new fermentation-based strategies are being adopted. Bioinformatics tools were utilised to isolate the Isoprene Synthase (IspS) gene which converts the precursors Isopentenyl Diphosphate (IPP) and Dimethylallyl Diphosphate (DMAPP) into isoprene. Metabolic engineering strategies were to synthesise an isoprene-producing recombinant clone derived from Artocarpus heterophyllus (jackfruit). The functional characterization was done using the overexpression of the isoprene synthase gene in an Escherichia coli BL21 host. The recombinant clone, ISPS_GBL_001 (submitted to GenBank, National Centre for Biotechnology Information or NCBI) was used for fermentation in the batch and fed-batch mode to produce isoprene. Isoprene productivity of 0.08 g/g dextrose was obtained via the fed-batch mode maintaining the process parameters at optimum. The quantification and confirmation of isoprene was done using gas chromatography (GC) and GC-mass spectrometry (GC-MS) of the extracted sample, respectively. This study makes significant contribution to the ongoing research on bio-isoprene synthesis by highlighting a novel plant source of the IspS gene followed by, its successful expression in a recombinant host, validated by fermentation.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-022-03441-7.

Co-biosynthesis of germacrene A, a precursor of β-elemene, and lycopene in engineered Escherichia coli

β-Elemene is the major component of a traditional Chinese medicine (Rhizoma Curcumae) for cancer treatment, and plant extraction is the major methods currently. Biosynthesis of β-elemene is a promising and attractive route due to its advantages, including environmentally friendly processes, renewable resources, and sustainable development. In this research, biosynthesis of germacrene A, direct precursor of β-elemene, in Escherichia coli was successfully performed and 11.99 mg/L germacrene A was obtained. Thereafter, a cobiosynthesis system for germacrene A and lycopene, another kind of isoprenoid, was constructed. Furthermore, the cultivation conditions were optimized. The germacrene A production was increased to the highest level reported to date, 364.26 mg/L, threefold increase to the strain with only germacrene A production. The cobiosynthesis system was suggested to promote the metabolic flux for germacrene A production. This research enabled germacrene A production in E. coli, and it highlights the promoting mechanism of the cobiosynthesis system for two chemicals which are both belonging to isoprenoids. KEY POINTS : • Co-production of germacrene A and lycopene in E. coli. • Promoting mechanism of cobiosynthesis of two isoprenoid compounds in E. coli. • Shake-flask production of germacrene A reached to the highest 364.26 mg/L in E. coli.

Microbial (E)-4-hydroxy-3-methylbut-2-enyl pyrophosphate reductase (IspH) and its biotechnological potential: A mini review

(E)-4-hydroxy-3-methylbut-2-enyl pyrophosphate (HMBPP) reductase (IspH) is a [4Fe-4S] cluster-containing enzyme, involved in isoprenoid biosynthesis as the final enzyme of the methylerythritol phosphate (MEP) pathway found in many bacteria and malaria parasites. In recent years, many studies have revealed that isoprenoid compounds are an alternative to petroleum-derived fuels. Thus, ecofriendly methods harnessing the methylerythritol phosphate pathway in microbes to synthesize isoprenoid compounds and IspH itself have received notable attention from researchers. In addition to its applications in the field of biosynthesis, IspH is considered to be an attractive drug target for infectious diseases such as malaria and tuberculosis due to its survivability in most pathogenic bacterium and its absence in humans. In this mini-review, we summarize previous reports that have systematically illuminated the fundamental and structural properties, substrate binding and catalysis, proposed catalytic mechanism, and novel catalytic activities of IspH. Potential bioengineering and biotechnological applications of IspH are also discussed.

Advances in the synthesis of three typical tetraterpenoids including β-carotene, lycopene and astaxanthin

Carotenoids are natural pigments that widely exist in nature. Due to their excellent antioxidant, anticancer and anti-inflammatory properties, carotenoids are commonly used in food, medicine, cosmetic and other fields. At present, natural carotenoids are mainly extracted from plants, algae and microorganisms. With the rapid development of metabolic engineering and molecular biology as well as the continuous in-depth study of carotenoids synthesis pathways, industrial microorganisms have showed promising applications in the synthesis of carotenoids. In this review, we introduced the properties of several carotenoids and their biosynthetic metabolism process. Then, the microorganisms synthesizing carotenoids through the natural and non-natural pathways and the extraction methods of carotenoids were summarized and compared. Meanwhile, the influence of substrates on the carotenoids production was also listed. The methods and strategies for achieving high carotenoid production are categorized to help with future research.

Solvent-Induced Selectivity of Isoprene From Bio-Derived Prenol

In this work we demonstrate the selective catalytic conversion of prenol, which is an allylic alcohol that can be prepared from renewable resources to isoprene. The catalyst is an inexpensive molybdenum complex (Molyvan L) designed and used as an additive for lubricants. Isoprene is generated under relatively mild reaction parameters at 130–150°C, for 2 h, under vapor pressure conditions that do not exceed 50 psi. Two cases were studied: one in which Molyvan L was dissolved in a base oil at 1% concentration (weight/weight) and then mixed with a solvent and prenol and the other in which neat Molyvan L was introduced in the reaction and the base oil was replaced with the solvent and prenol. We investigated the selectivity of the reaction using the following solvents in both cases: dodecane, dodecanol, isododecane, octane, blendstock for oxygenate blending (BOB3), a fuel surrogate, a polyalphaolefin (PAO4), and methoxy polyethylene glycol (methoxy PEG350). Although conversion of prenol was above 94% in all experiments, isoprene was formed with various degrees of efficiency alongside a prenol isomeric alcohol, diprenyl ether and mixed ether via intramolecular and intermolecular dehydration reactions. Dodecane appeared to have the highest level of selectivity initially in base oil so we studied the effect of various dodecane-like solvents on isoprene yield and product profile. Surprisingly, octane (similar to dodecane) and isododecane (branched alkane) generated insignificant amounts of byproducts, essentially providing the highly desired isoprene with a very high selectivity. Branching of the solvent does not appear to have an effect on selectivity. Another advantage of this catalyst is the low loadings required to effect the transformation; that is, 0.25% (weight/volume) in the cases using neat Molyvan L and 0.5% (weight/volume) in the cases using Molyvan L dissolved in the base oil. Provided that prenol can be produced in large scale from bioresources, this work would enable the sustainable production of isoprene, in good yield, and with very high selectivity.

Characteristics and Application of Rhodopseudomonas palustris as a Microbial Cell Factory

Rhodopseudomonas palustris, a purple nonsulfur bacterium, is a bacterium with the properties of extraordinary metabolic versatility, carbon source diversity and metabolite diversity. Due to its biodetoxification and biodegradation properties, R. palustris has been traditionally applied in wastewater treatment and bioremediation. R. palustris is rich in various metabolites, contributing to its application in agriculture, aquaculture and livestock breeding as additives. In recent years, R. palustris has been engineered as a microbial cell factory to produce valuable chemicals, especially photofermentation of hydrogen. The outstanding property of R. palustris as a microbial cell factory is its ability to use a diversity of carbon sources. R. palustris is capable of CO₂ fixation, contributing to photoautotrophic conversion of CO₂ into valuable chemicals. R. palustris can assimilate short-chain organic acids and crude glycerol from industrial and agricultural wastewater. Lignocellulosic biomass hydrolysates can also be degraded by R. palustris. Utilization of these feedstocks can reduce the industry cost and is beneficial for environment. Applications of R. palustris for biopolymers and their building blocks production, and biofuels production are discussed. Afterward, some novel applications in microbial fuel cells, microbial electrosynthesis and photocatalytic synthesis are summarized. The challenges of the application of R. palustris are analyzed, and possible solutions are suggested.

Recent Advances in the Biosynthesis of Farnesene Using Metabolic Engineering

Farnesene, as an important sesquiterpene isoprenoid polymer of acetyl-CoA, is a renewable feedstock for diesel fuel, polymers, and cosmetics. It has been widely applied in agriculture, medicine, energy, and other fields. In recent years, farnesene biosynthesis is considered a green and economical approach because of its mild reaction conditions, low environmental pollution, and sustainability. Metabolic engineering has been widely applied to construct cell factories for farnesene biosynthesis. In this paper, the research progress, common problems, and strategies of farnesene biosynthesis are reviewed. They are mainly described from the perspectives of the current status of farnesene biosynthesis in different host cells, optimization of the metabolic pathway for farnesene biosynthesis, and key enzymes for farnesene biosynthesis. Furthermore, the challenges and prospects for future farnesene biosynthesis are discussed.

Recent progress and new perspectives for diterpenoid biosynthesis in medicinal plants

Diterpenoids, including more than 18,000 compounds, represent an important class of metabolites that encompass both phytohormones and some industrially relevant compounds. These molecules with complex, diverse structures and physiological activities, have high value in the pharmaceutical industry. Most medicinal diterpenoids are extracted from plants. Major advances in understanding the biosynthetic pathways of these active compounds are providing unprecedented opportunities for the industrial production of diterpenoids by metabolic engineering and synthetic biology. Here, we summarize recent developments in the field of diterpenoid biosynthesis from medicinal herbs. An overview of the pathways and known biosynthetic enzymes is presented. In particular, we look at the main findings from the past decade and review recent progress in the biosynthesis of different groups of ringed compounds. We also discuss diterpenoid production using synthetic biology and metabolic engineering strategies, and draw on new technologies and discoveries to bring together many components into a useful framework for diterpenoid production.

Recent advances in the biosynthesis of isoprenoids in engineered Saccharomyces cerevisiae

Isoprenoids, as the largest group of chemicals in the domains of life, constitute more than 50,000 members. These compounds consist of different numbers of isoprene units (C₅H₈), by which they are typically classified into hemiterpenoids (C5), monoterpenoids (C10), sesquiterpenoids (C15), diterpenoids (C20), triterpenoids (C30), and tetraterpenoids (C40). In recent years, isoprenoids have been employed as food additives, in the pharmaceutical industry, as advanced biofuels, and so on. To realize the sufficient and efficient production of valuable isoprenoids on an industrial scale, fermentation using engineered microorganisms is a promising strategy compared to traditional plant extraction and chemical synthesis. Due to the advantages of mature genetic manipulation, robustness and applicability to industrial bioprocesses, Saccharomyces cerevisiae has become an attractive microbial host for biochemical production, including that of various isoprenoids. In this review, we summarized the advances in the biosynthesis of isoprenoids in engineered S. cerevisiae over several decades, including synthetic pathway engineering, microbial host engineering, and central carbon pathway engineering. Furthermore, the challenges and corresponding strategies towards improving isoprenoid production in engineered S. cerevisiae were also summarized. Finally, suggestions and directions for isoprenoid production in engineered S. cerevisiae in the future are discussed.

Positioning Bacillus subtilis as terpenoid cell factory

Increasing demands for bioactive compounds have motivated researchers to employ micro‐organisms to produce complex natural products. Currently, Bacillus subtilis has been attracting lots of attention to be developed into terpenoids cell factories due to its generally recognized safe status and high isoprene precursor biosynthesis capacity by endogenous methylerythritol phosphate (MEP) pathway. In this review, we describe the up‐to‐date knowledge of each enzyme in MEP pathway and the subsequent steps of isomerization and condensation of C5 isoprene precursors. In addition, several representative terpene synthases expressed in B. subtilis and the engineering steps to improve corresponding terpenoids production are systematically discussed. Furthermore, the current available genetic tools are mentioned as along with promising strategies to improve terpenoids in B. subtilis, hoping to inspire future directions in metabolic engineering of B. subtilis for further terpenoid cell factory development.

Metabolic Engineering of Different Microbial Hosts for Lycopene Production

As a result of the extensive use of lycopene in a variety of fields, especially the dietary supplement and health food industries, the production of lycopene has attracted considerable interest. Lycopene can be obtained through extraction from vegetables and chemical synthesis. Alternatively, the microbial production of lycopene has been extensively researched in recent years. Various types of microbial hosts have been evaluated for their potential to accumulate a high level of lycopene. Metabolic engineering of the hosts and optimization of culture conditions are performed to enhance lycopene production. After years of research, great progress has been made in lycopene production. In this review, strategies used to improve lycopene production in different microbial hosts and the advantages and disadvantages of each microbial host are summarized. In addition, future perspectives of lycopene production in different microbial hosts are discussed.

Metabolic Engineering Escherichia coli for the Production of Lycopene

Lycopene, a potent antioxidant, has been widely used in the fields of pharmaceuticals, nutraceuticals, and cosmetics. However, the production of lycopene extracted from natural sources is far from meeting the demand. Consequently, synthetic biology and metabolic engineering have been employed to develop microbial cell factories for lycopene production. Due to the advantages of rapid growth, complete genetic background, and a reliable genetic operation technique, Escherichia coli has become the preferred host cell for microbial biochemicals production. In this review, the recent advances in biological lycopene production using engineered E. coli strains are summarized: First, modification of the endogenous MEP pathway and introduction of the heterogeneous MVA pathway for lycopene production are outlined. Second, the common challenges and strategies for lycopene biosynthesis are also presented, such as the optimization of other metabolic pathways, modulation of regulatory networks, and optimization of auxiliary carbon sources and the fermentation process. Finally, the future prospects for the improvement of lycopene biosynthesis are also discussed.

The phosphorylation mechanism of mevalonate diphosphate decarboxylase: a QM/MM study

Mevalonate diphosphate decarboxylase (MDD) catalyses a crucial step of the mevalonate pathway via Mg2+-ATP-dependent phosphorylation and decarboxylation reactions to ultimately produce isopentenyl diphosphate, the precursor of isoprenoids, which is essential to bacterial functions and provides ideal building blocks for the biosynthesis of isopentenols. However, the metal ion(s) in MDD has not been unambiguously resolved, which limits the understanding of the catalytic mechanism and the exploitation of enzymes for the development of antibacterial therapies or the mevalonate metabolic pathway for the biosynthesis of biofuels. Here by analogizing structurally related kinases and molecular dynamics simulations, we constructed a model of the MDD-substrate-ATP-Mg2+ complex and proposed that MDD requires two Mg2+ ions for maintaining a catalytically active conformation. Subsequent QM/MM studies indicate that MDD catalyses the phosphorylation of its substrate mevalonate diphosphate (MVAPP) via a direct phosphorylation reaction, instead of the previously assumed catalytic base mechanism. The results here would shed light on the active conformation of MDD-related enzymes and their catalytic mechanisms and therefore be useful for developing novel antimicrobial therapies or reconstructing mevalonate metabolic pathways for the biosynthesis of biofuels.

Advancing provitamin A biofortification in sorghum: Genome-wide association studies of grain carotenoids in global germplasm

Vitamin A deficiency is one of the most prevalent nutritional deficiencies worldwide. Sorghum [Sorghum bicolor L. (Moench)] is a major cereal crop consumed by millions of people in regions with high vitamin A deficiency. We quantified carotenoid concentrations in a diverse sorghum panel using high-performance liquid chromatography and conducted a genome-wide association study (GWAS) of grain carotenoids to identify genes underlying carotenoid variation. There was moderate variation for β-carotene (00.8 μg g^-1 ), lutein (0.3-9.4 μg g^-1 ), and zeaxanthin (0.2-9.1 μg g^-1 ), but β-cryptoxanthin and α-carotene were nearly undetectable. Genotype had the largest effect size, at 81% for zeaxanthin, 62% for β-carotene, and 53% for lutein. Using multiple models, GWAS identified several significant associations between carotenoids and single nucleotide polymorphisms (SNPs), some of which colocalized with known carotenoid genes that have not been previously implicated in carotenoid variation. Several of the candidate genes identified have also been identified in maize (Zea mays L.) and Arabidopsis (Arabidopsis thaliana) carotenoid GWAS studies. Notably, an SNP inside the putative ortholog of maize zeaxanthin epoxidase (ZEP) had the most significant association with zeaxanthin and with the ratio between lutein and zeaxanthin, suggesting that ZEP is a major gene controlling sorghum carotenoid variation. Overall findings suggest there is oligogenic inheritance for sorghum carotenoids and suitable variation for marker-assisted selection. The high carotenoid germplasm and significant associations identified in this study can be used in biofortification efforts to improve the nutritional quality of sorghum.

Recent advances of metabolic engineering strategies in natural isoprenoid production using cell factories

This review covers the strategies mostly developed in the last three years for microbial production of isoprenoid, classified according to the engineering targets.

Enhanced Lycopene Production in Escherichia coli by Expression of Two MEP Pathway Enzymes from Vibrio sp. Dhg

Microbial production is a promising method that can overcome major limitations in conventional methods of lycopene production, such as low yields and variations in product quality. Significant efforts have been made to improve lycopene production by engineering either the 2-C-methyl-d-erythritol 4-phosphate (MEP) pathway or mevalonate (MVA) pathway in microorganisms. To further improve lycopene production, it is critical to utilize metabolic enzymes with high specific activities. Two enzymes, 1-deoxy-d-xylulose-5-phosphate synthase (Dxs) and farnesyl diphosphate synthase (IspA), are required in lycopene production using MEP pathway. Here, we evaluated the activities of Dxs and IspA of Vibrio sp. dhg, a newly isolated and fast-growing microorganism. Considering that the MEP pathway is closely related to the cell membrane and electron transport chain, the activities of the two enzymes of Vibrio sp. dhg were expected to be higher than the enzymes of Escherichia coli. We found that Dxs and IspA in Vibrio sp. dhg exhibited 1.08-fold and 1.38-fold higher catalytic efficiencies, respectively. Consequently, the heterologous overexpression improved the specific lycopene production by 1.88-fold. Our findings could be widely utilized to enhance production of lycopene and other carotenoids.

Identifying and engineering the ideal microbial terpenoid production host

More than 70,000 different terpenoid structures are known so far; many of them offer highly interesting applications as pharmaceuticals, flavors and fragrances, or biofuels. Extraction of these compounds from their natural sources or chemical synthesis is-in many cases-technically challenging with low or moderate yields while wasting valuable resources. Microbial production of terpenoids offers a sustainable and environment-friendly alternative starting from simple carbon sources and, frequently, safeguards high product specificity. Here, we provide an overview on employing recombinant bacteria and yeasts for heterologous de novo production of terpenoids. Currently, Escherichia coli and Saccharomyces cerevisiae are the two best-established production hosts for terpenoids. An increasing number of studies have been successful in engineering alternative microorganisms for terpenoid biosynthesis, which we intend to highlight in this review. Moreover, we discuss the specific engineering challenges as well as recent advances for microbial production of different classes of terpenoids. Rationalizing the current stages of development for different terpenoid production hosts as well as future prospects shall provide a valuable decision basis for the selection and engineering of the cell factory(ies) for industrial production of terpenoid target molecules.

Recent trends in integrated bioprocesses: aiding and expanding microbial biofuel/biochemical production

Microbial biosynthesis of fuels and chemicals represents a promising route for their renewable production. Product toxicity, however, represents a common challenge limiting the efficacy of this approach. Integrated bioprocesses incorporating in situ product separation are poised to help address this intrinsic problem, but suffer their own unique shortcomings. To improve and expand the utility of this versatile bioprocessing strategy, recent innovations have focused on developing more effective separation materials and novel process configurations, as well as adapting designs to accommodate semi-continuous modes of operation. As a result, integrated bioprocesses are finding new applications to aid the biosynthesis of an ever-growing list of bioproducts. Emerging applications, meanwhile, are exploring the further expansion of such designs to interface microbial and chemical catalysts, leading to new and versatile routes for the one-pot synthesis of an even greater diversity of renewable products.

Improvement of isoprene production in Escherichia coli by rational optimization of RBSs and key enzymes screening

Background

As an essential platform chemical mostly used for rubber synthesis, isoprene is produced in industry through chemical methods, derived from petroleum. As an alternative, bio-production of isoprene has attracted much attention in recent years. Previous researches were mostly focused on key enzymes to improve isoprene production. In this research, besides screening of key enzymes, we also paid attention to expression intensity of non-key enzymes.

Results

Firstly, screening of key enzymes, IDI, MK and IspS, from other organisms and then RBS optimization of the key enzymes were carried out. The strain utilized IDI_sa was firstly detected to produce more isoprene than other IDIs. IDI_sa expression was improved after RBS modification, leading to 1610-fold increase of isoprene production. Secondly, RBS sequence optimization was performed to reduce translation initiation rate value of non-key enzymes, ERG19 and MvaE. Decreased ERG19 and MvaE expression and increased isoprene production were detected. The final strain showed 2.6-fold increase in isoprene production relative to the original strain. Furthermore, for the first time, increased key enzyme expression and decreased non-key enzyme expression after RBS sequence optimization were obviously detected through SDS-PAGE analysis.

Conclusions

This study prove that desired enzyme expression and increased isoprene production were obtained after RBS sequence optimization. RBS optimization of genes could be a powerful strategy for metabolic engineering of strain. Moreover, to increase the production of engineered strain, attention should not only be focused on the key enzymes, but also on the non-key enzymes.

Electronic supplementary material

The online version of this article (10.1186/s12934-018-1051-3) contains supplementary material, which is available to authorized users.

Production of γ-terpinene by metabolically engineered Escherichia coli using glycerol as feedstock

Gamma (γ)-terpinene, a monoterpene compound, which is generally used in the pharmaceutical and cosmetics industries, due to its physical and chemical properties, is expected to become one of the more influential compounds used as an alternative biofuel in the future. It is necessary to seek more sustainable technologies such as microbial engineering for γ-terpinene production. In this study, we metabolically engineered Escherichia coli to produce γ-terpinene by introducing a heterologous mevalonate (MVA) pathway combined with the geranyl diphosphate synthase gene and γ-terpinene synthase gene. Subsequently, the culture medium and process conditions were optimised with a titre of 19.42 mg L-1 obtained. Additionally, in-depth analysis at translation level for the engineered strain and intermediate metabolites were detected for further analysis. Finally, the fed-batch fermentation of γ-terpinene was evaluated, where a maximum concentration of 275.41 mg L-1 with a maintainable feedstock of glycerol was achieved.