Biotransformation of bisphenol A analogues by the biphenyl-degrading bacterium Cupriavidusbasilensis - a structure-biotransformation relationship

Food grade plastics and Bisphenol A: Associated risks, toxicity, and bioremediation approaches

Bisphenols' widespread use in day to day life has enabled its existence in various compartments of the environment. Bisphenol A (BPA) is utilized as a monomer in manufacturing polycarbonate plastics, epoxy resins, as well as flame retardants and is also considered as an endocrine disruptor. This study focuses on determining BPA concentration in daily-use food-grade plastic containers, in addition to its toxicity evaluation in environmental samples contaminated by BPA leachates. The highest concentration of BPA was observed in black poly bags (42.78 ppm), followed by slice juice bottles and infant milk bottles. Toxicity tests revealed significant impacts on Rhizobium and Chlorella sp. as a representative species of soil and aquatic environment respectively. To biodegrade the BPA, two potential strains, Brucella sp. and Brevibacillus parabrevis, were isolated from a landfill site. Qualitative and quantitative evaluation of biodegraded BPA through U-HPLC and GC-MSMS showed various metabolites of BPA. Results indicate the native bacterial isolates as potential candidates for BPA degradation while transforming this contaminant to a less toxic and hazardous form. The study also proposes the risk associated with food-grade plastic containers and recommends to establish a sustainable way for plastic waste management.

Are the BPA analogues an alternative to classical BPA? Comparison between 2D and alternative 3D in vitro neuron model to assess cytotoxic and genotoxic effects

BPA is used in a wide range of consumer products with very concern toxicological properties. The European Union has restricted its use to protect human health. Industry has substituted BPA by BPA analogues. However, there is a lack of knowledge about their impacts. In this work, BPA and 5 BPA analogues (BPS, BPAP, BPAF, BPFL and BPC) have been studied in classical SH-SY5Y and the alternative 3D in vitro models after 24 and 96 h of exposure. Cell viability, percentage of ROS, cell cycle phases as well as the morphology of the spheroids were measured. The 2D model was more sensitive than the 3D models with differences in cell viability higher than 60% after 24 h of exposure, and different mechanisms of ROS production. After chronic exposure, both models were more affected in comparison to the 24 h exposure. After a recovery time (96 h), the spheroids exposed to 2.5-40 µM were able to recover cell viability and the morphology. Among the BPs tested, BPFL>BPAF>BPAP and >BPC revealed higher toxicological effects, while BPS was the only one with lower effects than BPA. To conclude, the SH-SY5Y 3D model is a suitable candidate to perform more reliable in vitro neurotoxicity tests.

Bisphenol A contamination in aquatic environments: a review of sources, environmental concerns, and microbial remediation

The production of polycarbonate, a high-performance transparent plastic, employs bisphenol A, which is a prominent endocrine-disrupting compound. Polycarbonates are frequently used in the manufacturing of food, bottles, storage containers for newborns, and beverage packaging materials. Global production of BPA in 2022 was estimated to be in the region of 10 million tonnes. About 65-70% of all bisphenol A is used to make polycarbonate plastics. Bisphenol A leaches from improperly disposed plastic items and enters the environment through wastewater from plastic-producing industries, contaminating, sediments, surface water, and ground water. The concentration BPA in industrial and domestic wastewater ranges from 16 to 1465 ng/L while in surface water it has been detected 170-3113 ng/L. Wastewater treatment can be highly effective at removing BPA, giving reductions of 91-98%. Regardless, the remaining 2-9% of BPA will continue through to the environment, with low levels of BPA commonly observed in surface water and sediment in the USA and Europe. The health effects of BPA have been the subject of prolonged public and scientific debate, with PubMed listing more than 17,000 scientific papers as of 2023. Bisphenol A poses environmental and health hazards in aquatic systems, affecting ecosystems and human health. While several studies have revealed its presence in aqueous streams, environmentally sound technologies should be explored for its removal from the contaminated environment. Concern is mostly related to its estrogen-like activity, although it can interact with other receptor systems as an endocrine-disrupting chemical. Present review article encompasses the updated information on sources, environmental concerns, and sustainable remediation techniques for bisphenol A removal from aquatic ecosystems, discussing gaps, constraints, and future research requirements.

Bisphenols-A Threat to the Natural Environment

Negative public sentiment built up around bisphenol A (BPA) follows growing awareness of the frequency of this chemical compound in the environment. The increase in air, water, and soil contamination by BPA has also generated the need to replace it with less toxic analogs, such as Bisphenol F (BPF) and Bisphenol S (BPS). However, due to the structural similarity of BPF and BPS to BPA, questions arise about the safety of their usage. The toxicity of BPA, BPF, and BPS towards humans and animals has been fairly well understood. The biodegradability potential of microorganisms towards each of these bisphenols is also widely recognized. However, the scale of their inhibitory pressure on soil microbiomes and soil enzyme activity has not been estimated. These parameters are extremely important in determining soil health, which in turn also influences plant growth and development. Therefore, in this manuscript, knowledge has been expanded and systematized regarding the differences in toxicity between BPA and its two analogs. In the context of the synthetic characterization of the effects of bisphenol permeation into the environment, the toxic impact of BPA, BPF, and BPS on the microbiological and biochemical parameters of soils was traced. The response of cultivated plants to their influence was also analyzed.

Fate of five bisphenol derivatives in Chlamydomonas mexicana: Toxicity, removal, biotransformation and microalgal metabolism

Bisphenols (BPs) are recognized as emerging contaminants because of their estrogenic properties and frequent occurrence in environmental matrices. Here, we evaluated the toxic effects of five common BPs on freshwater microalga Chlamydomonas mexicana and removal of the BPs by the alga. Bisphenols -AF (BPAF), -B (BPB), and -Z (BPZ) (96 h, EC50 1.78-12.09 mg·L-1) exhibited higher toxicity to C. mexicana compared to bisphenol -S (BPS) and -F (BPF) (96 h, EC50 30.53-85.48 mg·L-1). In contrast, the mixture of BPs exhibited acute toxicity (96 h, EC50 8.07 mg·L-1). After 14 days, C. mexicana had effectively removed 61%, 99%, 55%, 87%, and 89% of BPS, BPF, BPAF, BPB, and BPZ, respectively, at 1 mg L-1. The biotransformed products of all five BPs were analyzed using UHPLC QTOF, and their toxicity was predicted. All biotransformed products were observed to be less toxic than the parent compounds. The fatty acid composition of C. mexicana after exposure to the BP mixture was predominantly palmitic acid (34.14%), followed by oleic acid (18.9%), and γ-linolenic acid (10.79%). The results provide crucial information on the ecotoxicity of these five BPs and their removal by C. mexicana; the resulting biomass is a potential feedstock for producing biodiesel.

Draft Genome Sequence of the Bacterium Cupriavidus sp. Strain D39, Inhabiting the Rhizosphere of Pea Plants (Pisum sativum L.)

We report the draft genome sequence of Cupriavidus sp. strain D39, associated with the roots of pea plants. The genome is characterized by a GC content of 63.62% and a total length of 7.7 Mbp and contains several putative genes associated with resistance to metals and plant growth promotion.

Adverse (geno)toxic effects of bisphenol A and its analogues in hepatic 3D cell model

Bisphenol A (BPA) is one of the most widely used and versatile chemical compounds in polymer additives and epoxy resins for manufacturing a range of products for human applications. It is known as endocrine disruptor, however, there is growing evidence that it is genotoxic. Because of its adverse effects, the European Union has restricted its use to protect human health and the environment. As a result, the industry has begun developing BPA analogues, but there are not yet sufficient toxicity data to claim that they are safe. We investigated the adverse toxic effects of BPA and its analogues (BPS, BPAP, BPAF, BPFL, and BPC) with emphasis on their cytotoxic and genotoxic activities after short (24-h) and prolonged (96-h) exposure in in vitro hepatic three-dimensional cell model developed from HepG2 cells. The results showed that BPFL and BPC (formed by an additional ring system) were the most cytotoxic analogues that affected cell viability, spheroid surface area and morphology, cell proliferation, and apoptotic cell death. BPA, BPAP, and BPAF induced DNA double-strand break formation (γH2AX assay), whereas BPAF and BPC increased the percentage of p-H3-positive cells, indicating their aneugenic activity. All BPs induced DNA single-strand break formation (comet assay), with BPAP (≥0.1 μM) being the most effective and BPA and BPC the least effective (≥1 μM) under conditions applied. The results indicate that not all of the analogues studied are safer alternatives to BPA and thus more in-depth research is urgently needed to adequately evaluate the risks of BPA analogues and assess their safety for humans.

Bacterial degradation of bisphenol analogues: an overview

Bisphenol A (BPA) is one of the most produced synthetic monomers in the world and is widespread in the environment. BPA was replaced by bisphenol analogues (BP) because of its adverse effects on life. Bacteria can degrade BPA and other bisphenol analogues (BP), diminishing their environmental concentrations. This study aimed to summarize the knowledge and contribute to future studies. In this review, we surveyed papers on bacterial degradation of twelve different bisphenol analogues published between 1987 and June 2022. A total of 102 original papers from PubMed and Google Scholar were selected for this review. Most of the studies (94.1%, n = 96) on bacterial degradation of bisphenol analogues focused on BPA, and then on bisphenol F (BPF), and bisphenol S (BPS). The number of studies on bacterial degradation of bisphenol analogues increased more than six times from 2000 (n = 2) to 2021 (n = 13). Indigenous microorganisms and the genera Sphingomonas, Sphingobium, and Cupriavidus could degrade several BP. However, few studies focussed on Cupriavidus. The acknowledgement of various aspects of BP bacterial biodegradation is vital for choosing the most suitable microorganisms for the bioremediation of a single BP or a mixture of BP.

Trends and thresholds on bacterial degradation of bisphenol-A endocrine disruptor - a concise review

Bisphenol-A (BPA) is a monomer found in polycarbonate plastics, food cans, and other everyday chemicals; this monomer and its counterparts are widely used, culminating in its presence in water, soil, sediment, and the atmosphere. Furthermore, because of its estrogenic and genotoxic properties, it has been acknowledged as an endocrine disruptor; contamination of BPA in the environment is becoming a growing concern, and ways to effectively mitigate BPA from the environment are currently explored. Hence, the focal point of the review is to collate the bacterial degradation of BPA with the proposed degradation mechanism, explicitly focusing on researches published between 2017 and 2022. BPA breakdown is dependent primarily on bacterial metabolism, although numerous factors influence its fate in the environment. The metabolic routes for BPA breakdown in crucial bacterial strains were postulated, sourced on the transformed metabolite-intermediates perceived through degradation; enzymes and genes associated with the bacterial degradation of BPA have also been included in this review. This review will be momentous to generate a conceptual strategy and stimulate the progress on bacterial mitigation of BPA as a path to a sustainable cleaner environment.

Overlooked environmental risks deriving from aqueous transformation of bisphenol alternatives: Integration of chemical and toxicological insights

Owing to the widespread prevalence and ecotoxicity of bisphenol alternatives such as bisphenol S, bisphenol F, and bisphenol AF, the past decade has witnessed the publication of a remarkable number of studies related to their transformation and remediation in natural waters. However, the reactivity, removal efficiency, transformation products (TPs), and mechanisms of such emerging pollutants by different treatment processes have not been well elucidated. Particularly, the transformation-driven environmental risks have been mostly overlooked. Therefore, we present a review to address these issues from chemical and toxicological viewpoints. Four degradation systems can be largely classified as catalytic persulfate (PS) oxidation, non-catalytic oxidation, photolysis and photocatalysis, and biodegradation. It was found that bisphenol alternatives possess distinct reactivities with different oxidizing species, with the highest performance for hydroxyl radicals. All systems exhibit superior elimination efficiency for these compounds. The inadequate mineralization suggests the formation of recalcitrant TPs, from which the overall reaction pathways are proposed. The combined experimental and in silico analysis indicates that many TPs have developmental toxicity, endocrine-disrupting effects, and genotoxicity. Notably, catalytic PS systems and non-catalytic oxidation result in the formation of coupling products as well as halogenated TPs with higher acute and chronic toxicity and lower biodegradability than the parent compounds. In contrast, photolysis and photocatalysis generate hydroxylated and bond-cleavage TPs with less toxicity. Overall, this review highlights the secondary environmental risks from the transformation of bisphenol alternatives by conventional and emerging treatment processes. Finally, future perspectives are recommended to address the knowledge gaps of these contaminants in aquatic ecosystems.

A critical review of presence, removal and potential impacts of endocrine disruptors bisphenol A

Bisphenol A (BPA) is a synthetic organic compound that is mainly used in the production of polymer materials polycarbonate and epoxy resin. Widespread use and irregular processing methods have led to BPA being detected globally, raising concerns about its environmental and health effects. This review outlines an overview of the presence and removal of BPA in the environment and consumer products. We also summarized the endocrine-disrupting toxicity of BPA, and the relatively less summarized neurotoxicity, cytotoxicity, reproductive toxicity, genotoxicity, and carcinogenicity. Human exposure data show that humans have been exposed to low concentrations of BPA for a long time, future research should focus on the long-term exposure and the migration of BPA from consumer products to humans and the possible health risks associated with human exposure to BPA. Exploring economical and effective methods to reduce and remove BPA from the environment is imperative. The development of safe, functional and reproducible BPA analogs and the study of its degradation products can be the focus of subsequent research.

MAIT cell activation is reduced by direct and microbiota-mediated exposure to bisphenols

Oral uptake is the primary route of human bisphenol exposure, resulting in an exposure of the intestinal microbiota and intestine-associated immune cells. Therefore, we compared the impact of bisphenol A (BPA), bisphenol F (BPF) and bisphenol S (BPS) on (i) intestinal microbiota, (ii) microbiota-mediated immunomodulatory effects and (iii) direct effects on mucosal-associated invariant T (MAIT) cells in vitro. We acutely exposed human fecal microbiota, Bacteroides thetaiotaomicron and Escherichia coli to BPA and its analogues BPF and BPS referring to the European tolerable daily intake (TDI), i.e. 2.3 µg/mL, 28.3 µg/mL and 354.0 µg/mL. Growth and viability of E. coli was most susceptible to BPF, whereas B.thetaiotaomicron and fecal microbiota were affected by BPA > BPF > BPS. At 354.0 µg/mL bisphenols altered microbial diversity in compound-specific manner and modulated microbial metabolism, with BPA already acting on metabolism at 28.3 µg/mL. Microbiota-mediated effects on MAIT cells were observed for the individual bacteria at 354.0 µg/mL only. However, BPA and BPF directly modulated MAIT cell responses at low concentrations, whereby bisphenols at concentrations equivalent for the current TDI had no modulatory effects for microbiota or for MAIT cells. Our findings indicate that acute bisphenol exposure may alter microbial metabolism and impact directly on immune cells.

Bisphenol A and Its Analogues Deteriorate the Hormones Physiological Function of the Male Reproductive System: A Mini-Review

BPA is identified as an endocrine-disrupting chemical that deteriorates the physiological function of the hormones of the male reproductive system. Bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF) are actively explored as substitutes for BPA and are known as BPA analogues in most manufacturing industries. These analogues may demonstrate the same adverse effects as BPA on the male reproductive system; however, toxicological data explaining the male reproductive hormones' physiological functions are still limited. Hence, this mini-review discusses the effects of BPA and its analogues on the physiological functions of hormones in the male reproductive system, focusing on the hypothalamus-pituitary-gonad (HPG) axis, steroidogenesis, and spermatogenesis outcomes. The BPA analogues mainly show a similar negative effect on the hormones' physiological functions, proven by alterations in the HPG axis and steroidogenesis via activation of the aromatase activity and reduction of spermatogenesis outcomes when compared to BPA in in vitro and in vivo studies. Human biomonitoring studies also provide significant adverse effects on the physiological functions of hormones in the male reproductive system. In conclusion, BPA and its analogues deteriorate the physiological functions of hormones in the male reproductive system as per in vitro, in vivo, and human biomonitoring studies.

Transcriptomic analysis reveals ligninolytic enzymes of white-rot fungus Phanerochaete sordida YK-624 participating in bisphenol F biodegradation under ligninolytic conditions

Bisphenol F (BPF) is widely used in the plastic manufacturing industry as a replacement for bisphenol A (BPA) because BPF and BPA have similar structures and comparable properties. However, BPF is ubiquitously present in the environment and has higher toxicity to humans. This study is the first to report BPF degradation using the white-rot fungus Phanerochaete sordida YK-624 under ligninolytic conditions (pH=4.5, 30 °C). P. sordida YK-624 almost completely degraded BPF within 4 days. Moreover, functional genes involved in BPF degradation were detected by RNA-Seq. Metabolic processes and peroxidases were enriched by GO analysis, and the metabolic pathway was enriched according to the KEGG pathway analysis. These results suggested that P. sordida YK-624 could secrete higher levels of ligninolytic enzymes lignin peroxidase (LiP) and manganese peroxidase (MnP) for BPF degradation. The results indicated that LiPs and MnPs are important for BPF degradation and cytochrome P450s play a small role. Furthermore, reliability of the RNA-Seq results was validated by qRT-PCR.

Bisphenol A removal and degradation pathways in microorganisms with probiotic properties

Bisphenol-A (BPA) is a constituent of polycarbonate plastics and epoxy resins, widely applied on food packaging materials. As BPA exposure results in health hazards, its efficient removal is of crucial importance. In our study five potentially probiotic microorganisms, namely Lactococcus lactis, Bacillus subtilis, Lactobacillus plantarum, Enterococcus faecalis, and Saccharomyces cerevisiae, were tested for their toxicity tolerance to BPA and their BPA removal ability. Although BPA toxicity, evident on all microorganisms, presented a correlation to both BPA addition time and its concentration, all strains exhibited BPA-removal ability with increased removal rate between 0 and 24 h of incubation. BPA degradation resulted in the formation of two dimer products in cells while the compounds Hydroquinone (HQ), 4-Hydroxyacetophenone (HAP), 4-Hydroxybenzoic acid (HBA) and 4-Isopropenylphenol (PP) were identified in the culture medium. In the proposed BPA degradation pathways BPA adducts formation appears as a common pattern, while BPA decomposition as well as the formation, and the levels of its end products present differences among microorganisms. The BPA degradation ability of the tested beneficial microorganisms demonstrates their potential application in the bioremediation of BPA contaminated foods and feeds and provides a means to suppress the adverse effects of BPA on human and animal health.

Biodegradation pathway of the organophosphate pesticides chlorpyrifos, methyl parathion and profenofos by the marine-derived fungus Aspergillus sydowii CBMAI 935 and its potential for methylation reactions of phenolic compounds

The indiscriminate use of organophosphate pesticides causes serious environmental and human health problems. This study aims the biodegradation of chlorpyrifos, methyl parathion and profenofos with the proposal of new biodegradation pathways employing marine-derived fungi as biocatalysts. Firstly, a growth screening was carried out with seven fungi strains and Aspergillus sydowii CBMAI 935 was selected. For chlorpyrifos, 32% biodegradation was observed and the metabolites tetraethyl dithiodiphosphate, 3,5,6-trichloropyridin-2-ol, 2,3,5-trichloro-6-methoxypyridine, and 3,5,6-trichloro-1-methylpyridin-2(1H)-one were identified. Whereas 80% methyl parathion was biodegraded with the identification of isoparathion, methyl paraoxon, trimethyl phosphate, O,O,O-trimethyl phosphorothioate, O,O,S-trimethyl phosphorothioate, 1-methoxy-4-nitrobenzene, and 4-nitrophenol. For profenofos, 52% biodegradation was determined and the identified metabolites were 4-bromo-2-chlorophenol, 4-bromo-2-chloro-1-methoxybenzene and O,O-diethyl S-propylphosphorothioate. Moreover, A. sydowii CBMAI 935 methylated different phenolic substrates (phenol, 2-chlorophenol, 6-chloropyridin-3-ol, and pentachlorophenol). Therefore, the knowledge about the fate of these compounds in the sea was expanded, and the marine-derived fungus A. sydowii CBMAI 935 showed potential for biotransformation reactions.

Structural elucidation of bisphenol E and bisphenol S photoinduced by-products by high-resolution electrospray ionisation mass spectrometry and tandem mass spectrometry

RATIONALE

Bisphenol E (BPE) and bisphenol S (BPS) have recently replaced bisphenol A as monomers for producing polycarbonates. However, BPE and BPS can pose hazards as they are known to be endocrine disruptors. Despite the huge increase in their use, there is a lack of data regarding the toxicity and effects of BPE and BPS.

METHODS

We investigated the photoinduced transformation of BPE and BPS when subjected to sun-simulated radiation and using TiO₂ as a photocatalyst. Analyses of BPE, BPS and their by-products were performed by high-performance liquid chromatography/high-resolution mass spectrometry (HPLC/HRMS) using an orbitrap mass analyzer in negative electrospray ionisation (ESI) mode. The chromatographic separations were achieved by employing a C18 reversed-phase column, and the transformation products (TPs) were elucidated structurally using HRMS and multistage MS experiments performed in collision-induced dissociation (CID) mode.

RESULTS

The transformation of bisphenol S involved the formation of twelve by-products, while ten TPs were detected following BPE degradation. For bisphenol S, the cleavage of the molecule is a very important transformation route, together with the hydroxylation of the substrate to provide mono- and poly-hydroxylated TPs. For bisphenol E, the two main routes were hydroxylation and ring opening. Acute toxicity for BPS, BPE and their TPs was assessed using the Vibrio fischeri assay, highlighting that their initial transformation involved the formation of TPs that were more toxic than the parent compound.

CONCLUSIONS

The HPLC/HRMS method developed was useful for characterising and identifying newly formed TPs from bisphenol E and bisphenol S. This study aimed to examine the structure of twenty by-products identified during TiO₂ -mediated photolysis and to evaluate acute toxicity over time.

Toxic effect of fluorene-9-bisphenol to green algae Chlorella vulgaris and its metabolic fate

Fluorene-9-bisphenol (BHPF), a bisphenol A (BPA) alternative, has recently attracted attention due to its wide use and potential toxicity. However, the toxic effects and fate of BHPF in freshwater algae remains to be elucidated. In this study, the impact of BHPF on Chlorella vulgaris was explored and the removal and bioaccumulation of BHPF by Chlorella vulgaris were investigated. Results showed that C. vulgaris was sensitive to BHPF at the concentration of >1 mg L-1, and lipid peroxidation was significantly increased under the exposure of >0.1 mg BHPF L-1. An oxidative stress was caused by BHPF, as the activities of superoxide dismutase (SOD) were significantly decreased in algal cells by >0.5 mg BHPF L-1. The removal rate of BHPF was significantly enhanced by the addition of algae. In addition, the increasing accumulation of BHPF in algae at concentrations ranging from 0.5 to 5 mg L-1 was observed and may contribute for the increased toxicity of BHPF to C. vulgaris. Ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) results demonstrated that three metabolites of BHPF were identified in algal cells, which may pose an unexpected effect in aquatic environment.

Croceicoccus bisphenolivorans sp. nov., a bisphenol A-degrading bacterium isolated from seawater

A bisphenol A-degrading bacterium, designated as strain H4^T, was isolated from surface seawater, which was sampled from the Jiulong River estuary in southeast PR China. Strain H4^T is Gram-stain-negative, aerobic, short rod-shaped, lacking bacteriochlorophyll a, motile with multifibrillar stalklike fascicle structures and capable of degrading bisphenol A. Growth of strain H4^T was observed at 24-45 °C (optimum, 32 °C), at pH 5.5-9 (optimum, pH 7.0) and in 0-7 % NaCl (optimum, 2 %; w/v) . The 16S rRNA gene sequence of strain H4^T showed highest similarity to Croceicoccus pelagius Ery9^T (98.7 %), Croceicoccus sediminis (98.3 %), Croceicoccus naphthovorans PQ-2^T (98.1 %) and Croceicoccus ponticola GM-16^T (97.6 %), followed by Croceicoccus marinus E4A9^T (96.7 %) and Croceicoccus mobilis Ery22^T (96.0 %). Phylogenetic analysis revealed that strain H4^T fell within a clade comprising the type strains of Croceicoccus species and formed a phyletic line with them that was distinct from other members of the family Erythrobacteraceae. The sole respiratory quinone was quinone 10 (Q-10). The predominant fatty acids (>5 % of the total fatty acids) of strain H4^T were summed feature 8 (C_18 : 1  ω6c and/or C_18 : 1  ω7c), summed feature 3 (C_16 : 1  ω6c and/or C_16 : 1  ω7c), C_17 : 1  ω6c and C_14 : 02-OH. The genomic DNA G+C content was 62.8 mol%. In the polar lipid profile, phosphatidylcholine, phosphatidylethanolamine, phosphatidylglycerol, two unidentified phospholipids, two sphingoglycolipids and three unknown lipids were the major compounds. Based on the genotypic and phenotypic data, strain H4^T represents a novel species of the genus Croceicoccus, for which the name Croceicoccus bisphenolivorans sp. nov. is proposed. The type strain is H4^T (=DSM 102182^T=MCCC1 K02301^T).

Discovery of New Protein Targets of BPA Analogs and Derivatives Associated with Noncommunicable Diseases: A Virtual High-Throughput Screening

BACKGROUND

Bisphenol A analogs and derivatives (BPs) have emerged as new contaminants with little or no information about their toxicity. These have been found in numerous everyday products, from thermal paper receipts to plastic containers, and measured in human samples.

OBJECTIVES

The objectives of this research were to identify in silico new protein targets of BPs associated with seven noncommunicable diseases (NCDs), and to study their protein-ligand interactions using computer-aided tools.

METHODS

Fifty BPs were identified by a literature search and submitted to a virtual high-throughput screening (vHTS) with 328 proteins associated with NCDs. Protein-protein interactions between predicted targets were examined using STRING, and the protocol was validated in terms of binding site recognition and correlation between in silico affinities and in vitro data.

RESULTS

According to the vHTS, several BPs may target proteins associated with NCDs, some of them with stronger affinities than bisphenol A (BPA). The best affinity score (the highest in silico affinity absolute value) was obtained after docking 4,4'-bis(N-carbamoyl-4-methylbenzensulfonamide)diphenylmethane (BTUM) on estradiol 17-beta-dehydrogenase 1 (-13.7 kcal/mol). However, other molecules, such as bisphenol A bis(diphenyl phosphate) (BDP), bisphenol PH (BPPH), and Pergafast 201 also exhibited great affinities (top 10 affinity scores for each disease) with proteins related to NCDs.

DISCUSSION

Molecules such as BTUM, BDP, BPPH, and Pergafast 201 could be targeting key signaling pathways related to NCDs. These BPs should be prioritized for in vitro and in vivo toxicity testing and to further assess their possible role in the development of these diseases. https://doi.org/10.1289/EHP7466.

Kinetics and biotransformation products of bisphenol F and S during aerobic degradation with activated sludge

Bisphenol F (BPF) and bisphenol S (BPS) are becoming widespread in the environment despite the lack of information regarding their fate during wastewater treatment and in the environment. This study assessed the biodegradation kinetics of BPF and BPS during biological wastewater treatment with activated sludge using GC-MS/MS, and the identification of biotransformation products (BTPs) using LC-QTOF-MS. The results showed that BPF and BPS degrade readily and unlikely accumulate in biosolids or wastewater effluent (c_i = 0.1 mg L^-1, half-lives <4.3 days). The first-order kinetic model revealed that BPF (k_t = 0.20-0.38) degraded faster than BPS (k_t = 0.04-0.16) and that degradation rate decreases with an increasing initial concentration of BPS (half-lives 17.3 days). The absence of any additional organic carbon source significantly slowed down degradation, in particular, that of BPS (lag phase on day 18 instead of day 7). The machine-learning algorithm adopted as part of the non-targeted workflow identified three known BTPs and one novel BTP of BPF, and one known and ten new BTPs of BPS. The data from this study support possible new biodegradation pathways, namely sulphation, methylation, cleavage and the coupling of smaller bisphenol moieties.