Effect of lordosis angle change after lumbar/lumbosacral fusion on sacrum angular displacement: a finite element study

Biomechanical Effects of Different Spacing Distributions Between the Cemented Superior Boundary and Surgical Vertebral Superior Endplates After Percutaneous Vertebroplasty for Osteoporotic Vertebral Compression Fractures: A Three-Dimensional Finite Element Analysis

OBJECTIVE

Patients with osteoporotic vertebral compression fractures (OVCF) treated with vertebroplasty (PVP) are experiencing an increasing number of problems such as pain recurrence, mainly due to recompression fractures of the operated vertebral body within a certain period of time after the operation, which is closely related to the distribution of intraoperative bone cement. The aim of this study is to investigate the effect of different spacing distributions between the upper boundary of the cement and the upper endplate of the operated vertebra on the biomechanics of the operated vertebra after percutaneous vertebroplasty for OVCF using finite element analysis (FEA).

METHODS

One patient with L1 vertebral body OVCF was selected, and computed tomography (CT) of the thoracolumbar segment was performed. The CT data were extracted to establish an FEA model of the T12-L2 vertebral bodies. Bone cement was injected into the L1 vertebral body. Based on the spacing between the upper boundary of the bone cement and the vertebral body's upper endplates, the model vertebrae were divided into 0, 2, 4, and 6 mm spacing groups, and the human body's upright, flexion-extension, lateral flexion, and rotational positions were simulated. The biomechanical effects of different spacing distributions on the postoperative L1 vertebral body and the injected bone cement were evaluated.

RESULTS

In this paper, we found that the Von Mises stress of the L1 vertebrae was the smallest when the spacing between the upper boundary of the bone cement and the vertebral body's upper endplates was 0 mm. The larger the spacing in a certain range between the upper boundary of the bone cement and the vertebral body's upper endplates, the greater the Von Mises stress of the L1 vertebrae. However, in the stress comparison of the injected bone cement, the Von Mises stress of the bone cement was greatest when the spacing between the upper boundary of the bone cement and the upper endplate of the vertebral body was 0 mm; the larger the spacing, the smaller the Von Mises stress.

CONCLUSION

When the contact spacing between the upper boundary of the bone cement and the upper endplate of the vertebral body is 0 mm, it can effectively eliminate and transfer the pressure caused by the load, thus reducing the stress on the cancellous bone and further reducing the risk of vertebral refracture after surgery.

Study on the biodynamic characteristics and internal vibration behaviors of a seated human body under biomechanical characteristics

To provide reference and theoretical guidance for establishing human body dynamics models and studying biomechanical vibration behavior, this study aimed to develop and verify a computational model of a three-dimensional seated human body with detailed anatomical structure under complex biomechanical characteristics to investigate dynamic characteristics and internal vibration behaviors of the human body. Fifty modes of a seated human body were extracted by modal method. The intervertebral disc and head motions under uniaxial white noise excitation (between 0 and 20 Hz at 1.0, 0.5 and 0.5 m/s2 r.m.s. for vertical, fore-aft and lateral direction, respectively) were computed by random response analysis method. It was found that there were many modes of the seated human body in the low-frequency range, and the modes that had a great impact on seated human vibration were mainly distributed below 13 Hz. The responses of different positions of the spine varied greatly under the fore-aft and lateral excitation, but the maximum stress was distributed in the lumbar under different excitations, which could explain why drivers were prone to lower back pain after prolonged driving. Moreover, there was a large vibration coupling between the vertical and fore-aft direction of an upright seated human body, while the vibration couplings between the lateral and other directions were very small. Overall, the study could provide new insights into not only the overall dynamic characteristics of the human body, but also the internal local motion and biomechanical characteristics under different excitations.

Influence of foot excitation and shin posture on the vibration behavior of the entire spine inside a seated human body

Due to ethical issues and simplification of traditional biomechanical models, experimental methods and traditional computer methods were difficult to quantify the effects of foot excitation and shin posture on vibration behavior of the entire spine inside a seated human body under vertical whole-body vibration. This study developed and verified different three-dimensional (3D) finite element (FE) models of seated human body with detailed anatomical structure under the biomechanical characteristics to predict vibration behavior of the entire spine inside a seated human body with different foot excitation (with and without vibration) and shin posture (vertical and tilt posture). Random response analysis was performed to study the transmissibility of the entire spine to seat under vertical white noise excitation between 0 and 20 Hz at 0.5 m/s2 r.m.s. The results showed that although the foot excitation could reduce the fore-aft transmissibility in the cervical spine (23% reduction), it could significantly increase that in the lumbar spine (52% increase), which resulted in complex alternating stresses at lumbar spine and made the lumbar spine more vulnerable to injury in long-term vibration environment. Moreover, the shin tilt posture made the maximum fore-aft transmissibility in the lumbar spine move to the upper lumbar spine. The study provided new insights into the influence of foot excitation and shin posture on the vibration behavior of the entire spine inside a seated human body. Foot excitation exposed the lumbar spine to complex alternating stresses and made it more vulnerable to injury in long-term whole body vibration.

Biomechanical responses of the human lumbar spine to vertical whole-body vibration in normal and osteoporotic conditions

BACKGROUND

The prevalence of osteoporosis is continuing to escalate with an aging population. However, it remains unclear how biomechanical behavior of the lumbar spine is affected by osteoporosis under whole-body vibration, which is considered a significant risk factor for degenerative spinal disease and is typically present when driving a car. Accordingly, the objective of this study was to compare the spine biomechanical responses to vertical whole-body vibration between normal and osteoporotic conditions.

METHODS

A three-dimensional finite-element model of the normal human lumbar spine-pelvis segment was developed using computed tomographic scans and was validated against experimental data. Osteoporotic condition was simulated by modifying material properties of bone tissues in the normal model. Transient dynamic analyses were conducted on the normal and osteoporotic models to compute deformation and stress in all lumbar motion segments.

FINDINGS

When osteoporosis occurred, vibration amplitudes of the vertebral axial displacement, disc bulge, and disc stress were increased by 32.1-45.4%, 25.7-47.1% and 23.0-42.7%, respectively. In addition, it was found that for both the normal and osteoporotic models, the response values (disc bugle and disc stress) were higher in L4-L5 and L5-S1 intervertebral discs than in other discs.

INTERPRETATION

Osteoporosis deteriorates the effect of whole-body vibration on lumbar spine, and the lower lumbar segments might have a higher likelihood of disc degeneration under whole-body vibration.

Biomechanics of the Sacroiliac Joint: Surgical Treatments

BACKGROUND

Fixation is one of the most common surgical techniques for the treatment of chronic pain originating from the sacroiliac joint (SIJ). Many studies have investigated the clinical outcomes and biomechanics of various SIJ surgical procedures. However, the biomechanical literature points to several issues that need to be further explored, especially for the devices used in minimally invasive surgery of the SIJ. This study (part II) aims to assess biomechanical literature to understand the existing information as it relates to efficacies of the surgical techniques and the gaps in the knowledge base. Part I reviewed basic anatomy and mechanics of the SIJ joint, including difference between males and females, and causes of pain emanating from these joints.

METHODS

A thorough literature review was performed pertaining to studies related to SIJ fixation techniques and the biomechanical outcomes of the surgical procedures.

RESULTS

Fifty-five studies matched the search criteria and were considered for the review. These articles predominantly pertained to the biomechanical outcomes of the minimally invasive surgery with different instrumentation systems and surgical settings.

CONCLUSIONS

The SIJ is one of the most overlooked sources of lower back pain. The joint is responsible for the pain in 15% to 30% of people suffering from lower back pain. Various studies have investigated the clinical outcomes of different surgical procedures intended to improve the pain and quality of life following surgery. The data show that these techniques are indeed effective. However, clinical studies have raised several issues, like optimal number and positioning of implants, unilateral versus bilateral placements, adjacent segment disease, implant designs, and optimal location of implants with respect to variations in bone density across the SIJ. Biomechanical studies using in vitro and in silico techniques have addressed some of these issues. Studies also point out the need for additional investigations for a better understanding of the underlying mechanics for the improved long-term surgical outcomes. Further long-term clinical follow-ups are essential as well. This review presents pertinent findings.