Liquid-phase microextraction based on solidified floating drops of organic solvents

Microextraction techniques for occupational biological monitoring: Basic principles, current applications and future perspectives

The application of green microextraction techniques (METs) is constantly being developed in different areas including pharmaceutical, forensic, food and environmental analysis. However, they are less used in biological monitoring of workers in occupational settings. Developing valid extraction methods and analytical techniques for the determination of occupational indicators plays a critical role in the management of workers' exposure to chemicals in workplaces. Microextraction techniques have become increasingly important because they are inexpensive, robust and environmentally friendly. This study aimed to provide a comprehensive review and interpret the applications of METs and novel sorbents and liquids in biological monitoring. Future perspectives and occupational indicators that METs have not yet been developed for are also discussed.

Diuretics in Different Samples: Update on the Pretreatment and Analysis Techniques

Diuretics are drugs that promote the excretion of water and electrolytes in the body and produce diuretic effects. Clinically, they are often used in the treatment of edema caused by various reasons and hypertension. In sports, diuretics are banned by the World Anti-Doping Agency (WADA). Therefore, in order to monitor blood drug concentration, identify drug quality and maintain the fairness of sports competition, accurate, rapid, highly selective and sensitive detection methods are essential. This review provides a comprehensive summary of the pretreatment and detection of diuretics in various samples since 2015. Commonly used techniques to extract diuretics include liquid-liquid extraction, liquid-phase microextraction, solid-phase extraction, solid-phase microextraction, among others. Determination methods include methods based on liquid chromatography, fluorescent spectroscopy, electrochemical sensor method, capillary electrophoresis and so on. The advantages and disadvantages of various pretreatment and analytical techniques are elaborated. In addition, future development prospects of these techniques are discussed.

Analysis of six preservatives in beverages using hydrophilic deep eutectic solvent as disperser in dispersive liquid-liquid microextraction based on the solidification of floating organic droplet

In this work, a deep eutectic solvent (DES) composed of tetrabutylammonium bromide (TBABr) and acetic acid in a 1:2 M ratio was applied as the dispersive solvent for the dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO), using 1-decanol as extractant. Six preservatives (benzoic acid, BA; sorbic acid, SA; methyl paraben, MP; ethyl paraben, EP; propyl paraben PP; and butyl paraben, BP) in beverages were determined simultaneously through high-performance liquid chromatography with a diode array detector (HPLC-DAD). Under the optimal experimental condition that consists of 200 μL of disperser (TBABr: acetic acid, 1:2), 80 μL of extractant (1-decanol), 3 min of vortex time, 4.5 of pH, 2.5 g of NaCl, the proposed method showed satisfactory linearity in the range of 0.05-50.0 mg L^-1, with a correlation coefficient (R²) higher than 0.9998. The limits of detection (LODs) varied from 0.02 to 0.05 mg L^-1 and the limits of quantification (LOQs) varied from 0.05-0.1 mg L^-1. The relative standard deviations (intra-day and inter-days) were below 5 %. The developed method was successfully applied to the determination of preservatives in beverages.

Solvent-terminated dispersive liquid-liquid microextraction: a tutorial

Solvent-terminated dispersive liquid-liquid microextraction (ST-DLLME) is a special mode of DLLME in which a demulsifying solvent is injected into the cloudy mixture of sample/extractant to break the emulsion and induce phase separation. The demulsification process starts by flocculation of the dispersed microdroplets by Ostwald ripening or coalescence to form larger droplets. Then, the extractant either floats or sinks depending on its density as compared with that for the aqueous sample. The demulsifier should have high surface activity and low surface tension in order to be capable of inducing phase separation. The extraction efficiency in ST-DLLME is controlled by the same experimental variables of normal DLLME (n-DLLME) such as the type and volume of the extractant as well as the disperser. Other parameters such as pH and the temperature of the sample, the stirring rate, the time of extraction and the addition of salt are also important to consider. Along with these factors, the demulsifier type and volume and the demulsification time have to be optimized. By using solvents to terminate the dispersion step in DLLME, the centrifugation process is not necessary. This in turn improves precision, increases throughput, decreases the risk of contamination through human intervention and minimizes the overall analysis time. ST-DLLME has been successfully applied for determination of both inorganic and organic analytes including pesticides and pharmaceuticals in water and biological fluids. Demulsification via solvent injection rather than centrifugation saves energy and makes ST-DLLME easier to automate. These characteristics in addition to the low solvent consumption, the reduced organic waste and the possibility of using water in demulsification bestow green features on ST-DLLME. This tutorial discusses the principle, the practical aspects and the different applications of ST-DLLME.

A regenerable sorbent composed of a zeolite imidazolate framework (ZIF-8), Fe3O4 and graphene oxide for enrichment of atorvastatin and simvastatin prior to their determination by HPLC

Graphene oxide (GO), nanosized Fe₃O₄ and zeolite imidazolate framework-8 (ZIF-8) were hybridized as a multifunctional sorbent for use in microextraction. The sorbent was characterized by SEM, TEM, XRD and FTIR. The composite is porous, has a high specific surface (> 600 m²·g^-1) and is paramagnetic. The GO sheets are shown to act as carriers for the Fe₃O₄ nanoparticles and ZIF-8. The composite is a viable material for the preconcentration of atorvastatin and simvastatin from urine prior to their determination by HPLC with PDA detection. The limits of detection are 116 and 387 pg·mL^-1, respectively. Recoveries from spiked urine samples range between 84.7 and 95.7%, with relative standard deviation of ≤4.5%. Enrichment factors range from 169 to 191. The method was successfully applied to the determination of atorvastatin in urine. Moreover, this sorbent is regenerable and recyclable for at least seven times without obvious decrease in performance. Graphical abstract A composite sorbent composed of a zeolite imidazolate framework, Fe₃O₄ and graphene oxide was applied to the extraction of statins in urine prior their determination by HPLC.

Ultrasound-assisted emulsification microextraction coupled with high-performance liquid chromatography for the simultaneous determination of fragrance allergens in cosmetics and water

A simple, inexpensive, and environmentally friendly method based on ultrasound-assisted emulsification microextraction followed by solidification of floating organic drop and high-performance liquid chromatography coupled to diode array detection was developed for the simultaneous determination of 18 potentially allergenic fragrance substances. Several parameters affecting the microextraction process were investigated in detail by the "one-variable-at-a-time" approach. Optimal conditions were the following: 50 μL of 2-dodecanol as extraction solvent, 10 mL of sample containing 150 g/L of salt, and 5 min of sonication at 35°C. Under the optimized conditions, method showed good linearity in the selected ranges, with squared correlation coefficients ranging from 0.948 to 0.999. Limits of detection ranged from 0.001 to 0.154 μg/mL and enrichment factors from 9 to 237. Precision of the method, expressed as relative standard deviation, was checked at two levels obtaining good results (3.3-14.4%). Recovery studies were made in baby bath water and in eau de cologne showing acceptable accuracy. Finally, the developed method was successfully applied to different commercial cosmetic and water samples. The most commonly found analyte was linalool followed by cinnamal and lilial. Most of the analyzed samples contained at least one of the target compounds.

Solidified floating organic drop microextraction for speciation of selenium and its distribution in selenium-rich tea leaves and tea infusion by electrothermal vapourisation inductively coupled plasma mass spectrometry

Solidified floating organic drop microextraction was combined with electrothermal vapourisation inductively coupled plasma mass spectrometry for Se species in Se-rich tea leaves and tea infusion, including total, suspended, soluble, organic and inorganic Se as well as Se(IV) and Se(VI). Ammonium pyrrolidinedithiocarbamate was used as both chelating reagent and chemical modifier in this study. Se(IV) and Se(VI) were separated at pH range of 2.0-5.0. An enrichment factor of 500 was obtained for Se(IV) from this method. Under the optimum conditions, the detection limits for Se(IV) and Se(VI) were 0.19 and 0.26pgmL(-1), respectively. The relative standard deviations were less than 5.5% (c=0.1ngmL(-1), n=9). This method was applied for Se species, its content and distribution in Se-rich tea leaves and tea infusion with satisfactory results. The recoveries of spike experiments are in the range of 92.2-106%. A certified reference material of tea leaves was analyzed by this method, and the results were in agreement with certified values.