Electrochemical determination of bisphenol A with a glassy carbon electrode modified with gold nanodendrites

Gold Nanoparticle-Modified Molecularly Imprinted Polymer-Coated Pencil Graphite Electrodes for Electrochemical Detection of Bisphenol A

The sensitive Bisphenol A (BPA) detection by an electrochemical sensor based on gold nanoparticle-doped molecularly imprinted polymer was successfully improved. This study describes the development of a method for BPA detection in both aqueous solution and real water samples using N-methacroyl-(L)-cysteine methyl ester and N-methacryloyl-(L)-phenylalanine methyl ester coated pencil graphite electrodes modified with AuNPs by differential pulse voltammetry (DPV). Importantly, AuNPs, which increase the electroactivity, were used to increase the surface area of a BPA-imprinted pencil graphite electrode (MIP PGE) sensor. Scanning electron microscopy and spectrophotometry analysis were used for the characterization. The DPV response of the synthesized electrode showed distinguished electrical conductivity. The MIP PGE and nonimprinted pencil graphite electrode (NIP PGE) sensor were evaluated for selective and sensitive detection of BPA in aqueous solutions. Five different BPA concentrations (1.5, 3.0, 4.5, 6.0, and 7.5 μM) were applied to the MIP PGE, and the DPV recognized signal responses with a correlation coefficient value of 0.9965. The modified electrode demonstrated good electrocatalytic activity toward BPA for the linear concentration range of 1.5-7.5 μM, and a low limit of detection was found as 0.1610 μM. The results show that the MIP PGE sensor has excellent potential for selective and sensitive detection of BPA in real water samples.

A voltammetric sensor for bisphenol A using gold nanochains and carbon nanotubes

Gold nanochains (AuNCs) were prepared, and this novel material was combined with carboxylated multi-walled carbon nanotubes (cMWCNTs) to be a nanocomposite for the first time. The transmission electron microscopy (TEM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and UV-Vis spectra were used to characterize the successful preparation of AuNCs and AuNC-cMWCNT composite. Based on this hybrid material, a voltammetric sensor of bisphenol A (BPA) was established. The proposed sensor displayed excellent performance for the measurement of BPA by obvious decreased anodic peak potential and enlarged peak current. Using the optimized conditions, BPA was detected using linear sweep voltammetry, and the linear range showed as wide as 0.5 μM to 2000 μM with the detection limit estimated to be 12 nM (S/N = 3). The as-proposed sensor also exhibited satisfactory performance in determining BPA of actual plastic samples.

New Aptamer/MoS2/Ni-Fe LDH Photoelectric Sensor for Bisphenol A Determination

Here, a new type of PEC aptamer sensor for bisphenol A (BPA) detection was developed, in which visible-light active MoS₂/Ni-Fe LDH (layered double hydroxide) heterostructure and aptamer were used as photosensitive materials and biometric elements, respectively. The combination of an appropriate amount of MoS₂ and Ni-Fe LDH enhances the photocurrent response, thereby promoting the construction of the PEC sensor. Therefore, we used a simple in situ growth method to fabricate a MoS₂/Ni-Fe LDH sensor to detect the BPA content. The aptasensor based on aptamer/MoS₂/Ni-Fe LDH displayed a linear range toward a BPA of 0.05-10 to 50-40,000 ng L^-1, and it has excellent stability, selectivity and reproducibility. In addition, the proposed aptamer sensor is effective in evaluating real water samples, indicating that it has great potential for detecting BPA in real samples.

An iron based organic framework coated with nickel hydroxide for energy storage, conversion and detection

Although electrode materials based on metal organic frameworks (MOFs) were widely studied in the electrochemistry field, the origin of poor conductivity is still a bottleneck restricting their development. Herein, we constructed a conductive circuit by growing a layer of hydroxide on the surface of the Fe-MOF, and composite materials (Fe-MOF@Ni(OH)₂) are applied in the fields of supercapacitor, OER, and electrochemical sensing. Fe-MOF@Ni(OH)₂ not only maintains the intrinsic advantages of Fe-MOF, but also improves the electrical conductivity. Fe-MOF@Ni(OH)₂ exhibits a high specific capacity of 188 mAh g^-1 at 1 A g^-1 . The energy density of the asymmetric supercapacitor (Fe-MOF@Ni(OH)₂-20//AC) reaches 67.1 Wh kg^-1. During the oxygen evolution reaction, the overpotential of the material is 280 mV at 10 mA cm^-2, and the Tafel slope is 37.6 mV dec^-1. The electrochemical sensing tests showed the detection limit of BPA is 5 μM. Hence, these results provide key insights into the design of multifunctional electrode materials.

Glucose Biosensor Based on Dendritic Gold Nanostructures Electrodeposited on Graphite Electrode by Different Electrochemical Methods

In this research, we have demonstrated a one-step electrochemical deposition of dendritic gold nanostructures (DGNs) on a graphite rod (GR) electrode without any template, seeds, surfactants, or stabilizers. Three electrochemical methods, namely, constant potential amperometry (CPA), pulse amperometry, and differential pulse voltammetry, were used for DGN synthesis on GR electrode and further application in enzymatic glucose biosensors. Formed gold nanostructures, including DGNs, were characterized by a field emission scanning electron microscopy. The optimal concentration of HAuCl4 (6.0 mmol L−1), duration of DGNs synthesis (400 s), electrodeposition potential (−0.4 V), and the best electrochemical method (CPA) were determined experimentally. Then the enzyme, glucose oxidase, was adsorbed on the surface of DGNs and covalently cross-linked with glutaraldehyde vapor. The enzymatic glucose biosensor based on DGNs electrodeposited at optimal conditions and modified with glucose oxidase showed a quick response (less than 3 s), a high saturation current (291 μA), appropriate linear range (up to 9.97 mmol L−1 of glucose, R2 = 0.9994), good repeatability (RSD 2.4, 2.2 and 1.5% for 2, 30, 97 mmol L−1 of glucose), low limit of detection (0.059 mmol L−1, S/N = 3) and good stability. Additionally, this biosensor could be successfully applied for glucose determination in real samples with good accuracy. These results proved the principle of enzymatic glucose biosensor development based on DGNs as the basis for further investigations.

A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring

Electrochemical sensors play a significant role in detecting chemical ions, molecules, and pathogens in water and other applications. These sensors are sensitive, portable, fast, inexpensive, and suitable for online and in-situ measurements compared to other methods. They can provide the detection for any compound that can undergo certain transformations within a potential window. It enables applications in multiple ion detection, mainly since these sensors are primarily non-specific. In this paper, we provide a survey of electrochemical sensors for the detection of water contaminants, i.e., pesticides, nitrate, nitrite, phosphorus, water hardeners, disinfectant, and other emergent contaminants (phenol, estrogen, gallic acid etc.). We focus on the influence of surface modification of the working electrodes by carbon nanomaterials, metallic nanostructures, imprinted polymers and evaluate the corresponding sensing performance. Especially for pesticides, which are challenging and need special care, we highlight biosensors, such as enzymatic sensors, immunobiosensor, aptasensors, and biomimetic sensors. We discuss the sensors' overall performance, especially concerning real-sample performance and the capability for actual field application.

Recent Advances in Electrochemical Sensors and Biosensors for Detecting Bisphenol A

In recent years, several studies have focused on environmental pollutants. Bisphenol A (BPA) is one prominent industrial raw material, and its extensive utilization and release into the environment constitute an environmental hazard. BPA is considered as to be an endocrine disruptor which mimics hormones, and has a direct relationship to the development and growth of animal and human reproductive systems. Moreover, intensive exposure to the compound is related to prostate and breast cancer, infertility, obesity, and diabetes. Hence, accurate and reliable determination techniques are crucial for preventing human exposure to BPA. Experts in the field have published general electrochemical procedures for detecting BPA. The present timely review critically evaluates diverse chemically modified electrodes using various substances that have been reported in numerous studies in the recent decade for use in electrochemical sensors and biosensors to detect BPA. Additionally, the essential contributions of these substances for the design of electrochemical sensors are presented. It has been predicted that chemically modified electrode-based sensing systems will be possible options for the monitoring of detrimental pollutants.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Graphene-bimetallic nanoparticle composites with enhanced electro-catalytic detection of bisphenol A

This study brings for the first time novel knowledge about the synthesis by catalytic chemical vapor deposition with induction heating of graphene-bimetallic nanoparticle composites (Gr-AuCu and Gr-AgCu) and their morphological and structural characterization by transmission electron microscopy, Raman spectroscopy, and x-ray powder diffraction. Gold electrodes modified with the obtained materials exhibit an enhanced electro-catalytic effect towards one of the most encountered estrogenic disruptive chemicals, bisphenol A (BPA). The BPA behavior in varying pH solutions was investigated using the electrochemical quartz crystal microbalance, which allowed the accurate determination of the number of molecules involved in the oxidation process. The modified electrodes promote the oxidation of BPA at significantly lower potentials (0.66 V) compared to bare gold (0.78 V). In addition, the peak current density recorded with such electrodes greatly exceeded that obtained with bare gold (e.g. one order of magnitude larger, for a Au/Gr-AgCu electrode). The two modified electrodes have low detection limits, of 1.31 × 10^-6 M and 1.91 × 10^-6 M for Au/Gr-AgCu and Au/Gr-AuCu, respectively. The bare gold electrode has a higher detection limit of 5.1 × 10^-6 M. The effect of interfering species (e.g. catechol and 3-nitrophenol) was also investigated. Their presence influenced not only the BPA peak potential, but also the peak current. With both modified electrodes, no peak currents were recorded below 3 × 10^-5 M BPA.