A pH responsive nanogel composed of magnetite, silica and poly(4-vinylpyridine) for extraction of Cd(II), Cu(II), Ni(II) and Pb(II)

Monte Carlo simulation of the ionization and uptake behavior of cationic oligomers into pH-responsive polyelectrolyte microgels of opposite charge - a model for oligopeptide uptake and release

External stimuli can tune the uptake and release of guest molecules in microgels. Especially their pH responsiveness makes microgels exciting candidates for drug delivery systems. When both microgel and guest molecules are pH-responsive, predicting the electrostatically driven uptake can be complex since the ionization depends on many parameters. In this work, we performed Metropolis Monte Carlo simulations while systematically varying the pK of the monomers, the concentrations of microgel and guest molecules to obtain a better understanding of the uptake of weak cationic oligomers as a model for oligopeptides into a weak anionic polyelectrolyte microgel. Further, we varied the chain length of the oligomers. The polyelectrolyte networks can take up oligomers when both the network and the oligomers are charged. The presence of both species in the system leads to a mutual enhancement of their ionization. The uptake induces a release of counterions and results in complex formation between the oligomers and the network, leading to the collapse of the networks. Longer oligomers enhance the ionization of the network and, therefore, the complexation. A higher microgel concentration increases the uptake only around the isoelectric point but prevents the uptake due to lower entropy gain at counterion release at higher pH. The results give an insight into the uptake of cationic oligomers into oppositely charged polyelectrolyte microgels and provide hints for the design of anionic microgels as carriers for guest molecules e.g. antimicrobial peptides.

Ionisation and swelling behaviour of weak polyampholyte core-shell networks - a Monte Carlo study

The network charge of polyampholyte microgels can be tuned by varying the pH of the surrounding solution, and a charge reversal from a positively charged microgel at low pH to a negatively charged microgel at high pH can be achieved. In a titration experiment, it is difficult to tell apart the ionisation of the acidic and basic monomers in the network and to determine the distribution of charges in the network, whereas using Metropolis Monte Carlo simulations, both the degree of ionisation and the distribution of ionised monomers can be determined separately for both species. Building on our earlier work on alternating polyampholyte microgels, we now investigated the pH-dependent ionisation and the swelling behaviour of polyampholyte core-shell microgels under good solvent conditions. For this purpose, we performed Metropolis Monte Carlo simulations for a bead-spring model using the constant-pH method. As in our previous study on alternating microgels, the width of the U-shaped curve of the microgels volume as a function of pH depends on the relative dissociation constants of acid and base, and the microgel volume can be approximated by a linear function of the total network charge. Due to the spatial separation of acid and base in core-shell systems, the ionisation is less enhanced compared to a microgel with an alternating distribution of the two species. Nevertheless, we still see an influence of the presence of one species on the ionisation behaviour of the other species under good solvent conditions. Furthermore, the isoelectric point is shifted towards higher pH, which is caused by a higher charge density in the core compared to that in the shell. Added salt changes the Donnan equilibrium, which determines the counterion distribution within and outside of the microgel. At the same time, it contributes to the electrostatic screening of the network charges, leading to a narrowing of the U-shaped volume transition curve.

Neutrophil membrane-coated immunomagnetic nanoparticles for efficient isolation and analysis of circulating tumor cells

The isolation and analysis of scarce circulating tumor cells (CTCs) with immunomagnetic nanoparticles (IMNs) have shown promising outcomes in noninvasive cancer diagnosis. However, the IMNs adsorb nonspecific proteins after entering into biofluids and the formed protein coronas cover surface targeting ligands, limiting the detection efficiency of IMNs. In addition, the interaction between surface targeting ligands and white blood cells (WBCs) significantly limits the purity of CTCs isolated by IMNs. Furthermore, the interfacial collision of nanoparticles and cells has negative effects on the viability of isolated CTCs. All of these limitations synthetically restrict the isolation and analysis of rare CTCs for early diagnosis and precision medicine. Here, we proposed that surface functionalization of IMNs with neutrophil membranes can simultaneously reduce nonspecific protein adsorption, enhance the interaction with CTCs, reduce the distraction from WBCs, and improve the viability of isolated CTCs. In spiked blood samples, our neutrophil membrane-coated IMNs (Neu-IMNs) exhibited a superior separation efficiency from 41.36% to 96.82% and an improved purity from 40.25% to 90.68% when compared to bare IMNs. Additionally, we successfully isolated CTCs in 19 out of total 20 blood samples from breast cancer patients using Neu-IMNs and further confirmed the feasibility of the isolated CTCs for downstream cell sequencing. Our work provides a new perspective on engineered IMNs for efficient isolation and analysis of CTCs, paving the way for early noninvasive diagnosis of cancer.

Three-dimensional tree-like branched TiO2 nanorods for the highly selective enrichment and determination of lead

Branched titanium dioxide nanorods (B-TiO₂ NRs) grown on fluorine-doped tin oxide glass (FTO) were developed, which can be used as a solid-phase extractant for preconcentration and determination of trace Pb(II) combined with inductively coupled plasma optical emission spectrometry (ICP-OES). The B-TiO₂ NR-based glass substrate displayed excellent adsorptive selectivity and capacity for Pb(II); the maximum adsorption capacity was found to be 168.4 mg⋅g^-1 PB(II) at pH = 5.0. It proved that the primary extraction mechanism was attributed to soft acid/soft base interactions to form complexes for chemisorption. Investigating the adsorption kinetics and isotherms indicated that the pseudo-second-order and Langmuir models can better describe Pb(II) adsorption on the B-TiO₂ NRs. The proposed method presented good linearity from 0.01 to 5 mg⋅L^-1 with a correlation coefficient (R²) of 0.9989 and a low limit of detection (LOD) of 2.2 μg⋅L^-1 for Pb(II) under optimal conditions. The method was successfully applied to Pb(II) determination in foodstuffs with desirable recoveries from 93.18 to 108.1% and good precision with an RSD of less than 12.2%. This work provides a new strategy for selective extraction and determination of Pb(II) in complicated matrix samples.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

Magnetic borate-modified Mxene: A highly affinity material for the extraction of catecholamines

A novel magnetic borate-modified MXene composite was prepared by in situ growth of Fe₃O₄ particles onto the surface of phenylboronic acid modified Ti₃C₂T_x nanosheets. The magnetic composite possesses highly selective recognition properties to catecholamines, and high adsorption capacity (up to 319.6 μmol g^-1) for dopamine. Besides, the adsorption of urinary catecholamines can be accomplished within 2.0 min. The excellent adsorption performance can be assigned to its unique 2D layered structures, which helps to shorten the diffusion path and facilitate molecular transport. In addition, the multilayer adsorption and the synergetic interactions of borate affinity, van der Waals forces, hydrogen bonding and π-π stacking also contribute to the adsorption. By coupling the magnetic boronate affinity composites with high-performance liquid chromatography-fluorescence detection, a sensitive method for the determination of catecholamines in urine samples was proposed. The validation results revealed it can offer good linearities (correlation coefficients higher than 99%). The method detection limits were 0.06, 0.16, 0.03 and 0.14 ng mL^-1 for norepinephrine, epinephrine, dopamine and isoprenaline, respectively, and relative recoveries for these catecholamines were in the range of 98.56-108.1%, 92.56-110.0%, 98.79-112.3% and 88.14-97.81%, respectively. The proposed method was successfully applied to analyze the catecholamines in the urine samples from 15 healthy volunteers and 16 patients with Alzheimer's disease. The results indicated that the magnetic borate-modified Mxene composite possesses superior extraction performance, and can be used as an outstanding candidate for the extraction of catecholamines in pre-clinical or clinical studies.

Immobilization of unmodified aminoanthraquinone derivatives onto silica gel surface for solid-phase extraction and pre-concentration of Pb(II)

In this project, silica gel chemically bonded with derivatives of aminoanthraquinone were synthesized and characterized. Adsorbents 1,8-aminoanthraquinone-3-aminopropylsilica (SL1), 2-aminoanthraquinone-3-aminopropylsilica (SL2) and 1-aminoanthraquinone-3-aminopropylsilica (SL3) were produced and tested to adsorb heavy metal solutions including Pb(II) Cu(II) Zn(II) Cd(II) and Co(II). The concentrations of the adsorbed heavy metals solution were calculated by atomic adsorption spectrophotometry employing a batch method. The results showed that speed at 200 rpm for 30 min with pH 9 is the optimum condition for heavy metal adsorption. The result also indicated that adsorbent SL3 is the best adsorbent for Pb(II) at 82.5%, and the relative standard deviation (R.S.D.) was lower than 6%. The method detection limit was 1.1 µg L^-1 for Pb²⁺. In addition, Density Functional Theory (DFT) calculation results suggested that the adsorbent sensor formed stable complexes with Pb(II) through a large number of cation-dipole interactions. The method was also applied with satisfactory results to the pre-concentration of trace Pb(II) in environmental samples.

Application of stimuli-responsive materials for extraction purposes

Stimuli-responsive materials, frequently designated as "smart/intelligent materials", can modify their structure or properties by either a biological, physical, or chemical stimulus which, if properly controlled, could be used for specific applications. Such materials have been studied and exploited in several fields, like electronics, photonics, controlled drugs administration, imaging and medical diagnosis, among others, as well as in Analytical Chemistry where they have been used as chromatographic stationary phases, as part of sensors and for extraction purposes. This review article pretends to provide an overview of the most recent applications of these materials (mostly polymeric materials) in sample preparation for extraction purposes, as well as to provide a general vision of the current state-of-the-art of this field, their potential use and future applications.

Determination of cadmium and lead in tomato (Solanum lycopersicum) and lettuce (Lactuca sativa) consumed in Quito, Ecuador

•

Cadmium content was lower than 0.100 mg/kg (tomato) and 0.200 mg/kg (lettuce).

•

Lead content above or close to 0.100 mg/kg was found in 25 % of tomato samples.

•

Organic products had similar lead and cadmium content as nonorganic ones.

Vegetables are one of the most important components in the human diet, but despite their multiple nutritional components, studies have demonstrated the presence of trace metals in their edible parts. In Ecuador, two of the most consumed crops are tomato (Solanum lycopersicum) and lettuce (Lactuca sativa). The importance of these two crops in the Ecuadorian diet, especially in large and touristic locations like the Metropolitan District of Quito, implies food safety-related concerns for locals and visitors. However, no previous studies have quantified the cadmium and lead levels in these two vegetables using samples from Quito markets. Thus, the aim of this study was to determine the cadmium and lead content in both tomato and lettuce products from main nonorganic and organic markets in Quito using a graphite furnace atomic absorption spectrophotometer. The results showed that the cadmium levels were lower than 0.058 in tomatoes and 0.034 mg/kg in lettuce, which are under the respective threshold values (0.100 and 0.200 mg/kg). Regarding lead, levels lower than 0.066 mg/kg were detected in lettuce, which did not exceed the CXS 193–1995 threshold value, while levels in tomatoes were near or exceeded the threshold value (0.100 mg/kg) from four markets (0.209, 0.162, 0.110, 0.099 mg/kg), suggesting a possible risk from tomato consumption. In addition, most vegetables marketed as organic had higher metal content than those coming from nonorganic markets. Based on these results, local health and commercial control authorities should monitor contaminants in food products sold in Quito and other places in Ecuador to ensure their safety.

A Wide Bandgap Ag/MgO@Fe3O4 Nanocomposite as Magnetic Sorbent for Cd(II) in Water Samples

Background:

The magnetic nanocomposites are very important as a reusable sorbents for the extraction of Cd(II) and other toxic metals from water samples.

Methods:

The Ag/MgO@Fe3O4 nanocomposite was synthesized by the coprecipitation method and characterized by the XRD, EDX, SEM, UV-vis spectroscopy and FTIR. This nanocomposite was used to extract Cd(II) from water samples prior to its quantitative analysis with FAAS. Different variables, i.e. pH, temperature, amount of nanosorbent, adsorption/desorption and dilution were optimized.

Results:

The method was successfully applied to determine Cd(II) in real water samples with excellent recoveries (98%). The present method has lower detection (0.29) and quantification limit (0.97 ng mL-1).

Conclusions:

The Ag/MgO@Fe3O4 nanocomposite based magnetic extraction is a simple, fast, reproducible, less expansive and efficient technique for the Cd(II) extraction in water samples. The developed sorbent can be recycled and reused (20 times).

An "OR-AND" logic gate based multifunctional colorimetric sensor for the discrimination of Pb2+ and Cd2

Pb²⁺ and Cd²⁺ are the most ubiquitous heavy metal ion pollutants, and they have aroused much attention due to their irreversible and significant damage to human organ. In this work, a new fluorescein-based "OR-AND" logic gate colorimetric probe 3',6'-bis((tert-butyldiphenylsilyl)oxy)-2-(2-((2-hydroxyphenyl)imino)ethylidene)aminspiro[isoindoline-1,9'-xanthen]-3-one (FP) was designed and synthesized via attaching 2-(2-((2-hydroxyphenyl)imino)ethylidene)amino and tert-butyldiphenylsilyl to fluorescein as the specific identification groups. This sensor can rapidly and sensitively discriminate Pb²⁺ and Cd²⁺ by utilizing F^- as an auxiliary reagent. When Pb²⁺ or Cd²⁺ was added into the FP solution, the absorption band at 533 nm increased and the peak at 374 nm decreased, the color changed from colorless to pale-purple, resulting in a ratiometric spectral change. However, adding fluoride ion to the FP solution containing Pb²⁺ or Cd²⁺ resulted in a distinct phenomenon in which the pale purple color fades out to colorless for a Pb²⁺-containing solution and deepen to dark purple for a Cd²⁺-containing solution, which is attributable to the different coordination mechanisms. In aqueous solution, the detection limits of FP can reach 0.42 μM for Pb²⁺ and 0.53 μM for Cd²⁺. The probe exhibited rapid responses for these analytes. Moreover, FP was successfully used to rapidly detect trace amounts of hazardous Pb²⁺ and Cd²⁺ in tap water with good relative recovery and the relative standard deviations (RSD) were 1.8% for Pb²⁺ and 0.3% for Cd²⁺, providing a novel approach for detecting Pb²⁺ and Cd²⁺ in practical application.

Thermal and pH dual-responsive cellulose microfilament spheres for dye removal in single and binary systems

Cellulose microfilaments/poly(N-Isopropylacrylamide-co-acrylic acid) spheres (MPNAA) were prepared via the in-situ synthesis of semi-interpenetrating networks (semi-IPN). The free radical copolymerization of acrylic acid (AA) (for pH-sensitive chain segments) and N-isopropylacrylamide (NIPAM) (for temperature-sensitive chain segments) was conducted in a microwave-reactor in the presence of porous cellulose/microfilament composite spherical beads pre-prepared. The surface morphology and adsorption properties of the as-prepared spheres were systematically characterized. The adsorption behaviors of resulting MPNAA towards dyes, methylene blue (MB) and methyl violet (MV), were pH sensitive; and the optimal adsorption occurred at pH 9. The dynamic adsorption processes could be well fitted with pseudo-second-order kinetic, Elovich and simplified intraparticle diffusion models. Meanwhile, Langmuir, Temkin, Freundlich, and Dubinin-Raduskevich models were used to fit the adsorption isotherms at 25, 40, and 55 °C, respectively. The results indicated that the adsorption capacities of MPNAA towards MB and MV could reach as high as 497.5 and 840.3 mg g^-1, respectively, in single systems; and high adsorption capacity was maintain in binary systems with the favorable adsorption of MV. Overall, the semi-IPN MPNAA spheres are promising as novel pH- and temperature-responsive adsorbents, facilitating the controllable adsorption/desorption processes.

Column and batch sorption investigations of nickel(II) on extractant-impregnated resin

Macroporous resin-supported reagents have been identified as potential adsorbents for removal of toxic pollutants. This article presents an experimental designed to evaluate the sorption and desorption of nickel(II) with the help of column and batch procedure using simple extractant-impregnated resin (EIR). Isonitroso-4-methyl-2-pentanone (IMP) as an extractant was impregnated on a solid support like Amberlite XAD-4 to prepare the EIR sorbent. Column experimental conditions such as pH, sample flow rate and volume, eluting solution, and interfering ions were studied to optimize the nickel(II) sorption and recovery from aqueous media. The column results suggest that the quantitative nickel(II) sorption was observed at pH 5-6, and the quantitative recovery (≥ 95%) was achieved by using 1.0 M HNO₃. The high concentrations of cations and anions (except EDTA) present in the spiked binary and multi-element mixture solution show no interferences in both quantitative sorption and recovery of nickel(II), whereas the batch experiments were performed to evaluate nickel(II) sorption behavior using the linearized and non-linearized kinetic and isotherm models. By error function analysis, the Freundlich isotherm and the pseudo-first-order kinetic model were found to describe best the experimental data obtained over the studied concentration range and sorption time, respectively. The maximum sorption capacity of nickel(II) onto the EIR sorbent was found to be ~ 81 mg/g. The mean free energy (E = 10.1 kJ/mol) determined using Dubinin-Radushkevich isotherm suggests chemical nature of nickel(II) sorption on EIR. The novelty of the EIR adsorbent lies in its potential for separation and recovery of nickel(II) at trace level in water samples of different origin.

Dispersive Matrix Solid-Phase Extraction Method Coupled with High Performance Liquid Chromatography-Tandem Mass Spectrometry for Ultrasensitive Quantification of Endogenous Brassinosteroids in Minute Plants and Its Application for Geographical Distribution Study

An ultrasensitive analysis method for quantification of endogenous brassinosteroids in fresh minute plants was developed based on dispersive matrix solid-phase extraction coupled with high performance liquid chromatography-tandem mass spectrometry. During the dispersive matrix solid-phase extraction, plant samples were first ground with solid sorbent (dispersant) in one microcentrifuge tube and then centrifuged after adding extraction solvent and cleanup materials (another type of sorbent). Three protocols based on dispersive matrix solid-phase extraction were compared and discussed for plant samples with different matrix complexity. The choice of any protocol was a compromise of increasing purification efficiency and decreasing sample loss. Under optimized conditions, the limits of detection were 1.38-6.75 pg mL^-1 for five brassinosteroids in the oilseed rape samples. The intraday and interday precisions were in the range of 0.8%-9.8% and 4.6%-17.3%, respectively. The proposed method was successfully applied to detection of endogenous brassinosteroids in milligram oilseed rape (2.0 mg) and submilligram Arabidopsis thaliana seedlings (0.5 mg). Finally, the geographical distribution of five endogenous brassinosteroids of Brassica napus L. oilseed rape in different provinces of origin in the Yangtze River basin was described.

Study on cellulose microfilaments based composite spheres: Microwave-assisted synthesis, characterization, and application in pollutant removal

A novel study of synthesizing the temperature-responsive polymer grafted cellulose filaments/Poly (N-isopropylacrylamide) (NIPAM) spheres (P-MCCBs) was carried out for the removal of dyes and heavy metal ions. The novelty of the presented work consists of the application of the nano-sized pore-forming agent (Calcium Carbonate) and the introduction of a temperature-responsive monomer (NIPAM) while preparing the adsorbents. In addition, the spherical adsorbents were synthesized through an in-situ free radical polymerization using a microwave-assisted heating approach. The morphology, chemical structure, pH, and thermal sensitivity of P-MCCBs were characterized properly. The adsorption and desorption behaviors of dyes and heavy metal ions on P-MCCBs were also investigated. The results showed that P-MCCBs exhibited a fast adsorption rate, the adsorption equilibrium reached within 80 min and 40 min for MB and Pb²⁺, respectively (25 °C). Moreover, around 5-8% and 20% of adsorbed MB and Pb²⁺ were released at the temperature above 45 °C. The adsorption kinetics followed pseudo-second-order model, and the desorption process was fit well using Higuchi and Korsmeyer-Peppas models. These results indicated that P-MCCBs could be served as a novel material for controllable adsorption and desorption processes of various contaminants.

An efficient, cost effective, sensing behaviour liquid-liquid extraction and spectrophotometric determination of copper(II) incorporated with 4-(4'-chlorobenzylideneimino)-3-methyl-5-mercapto-1, 2, 4-triazole: Analysis of food samples, leafy vegetables, fertilizers and environmental samples

The aim of the present work is to develop an efficient, simple and selective moreover cost-effective method for the extractive spectrophotometric determination of copper(II) by using the Schiff base 4-(4'-chlorobenzylideneimino)-3-methyl-5-mercapto-1, 2, 4-triazole [CBIMMT]. This chromogenic reagent forms a yellow coloured complex with copper(II) in acetate buffer at pH4.2. The copper(II) complex with ligand is instantly extracted into chloroform and shows a maximum absorbance at 414nm which remains stable for >48h. The composition of extracted complex is found to be 1:2 [copper(II): reagent] which was ascertained using Job's method of continuous variation, mole ratio method and slope ratio method. Under optimal conditions, the copper(II) complex in chloroform adheres to Beer's law up to 17.5μgmL^-1 of copper(II). The optimum concentration range obtained from Ringbom's plot is from 5μgmL^-1 to 17.5μgmL^-1. The molar absorptivity, Sandell's sensitivity and enrichment factor of the extracted copper(II) chelate are 0.33813×10⁴Lmol^-1cm^-1, 0.01996μgcm^-2 and 2.49 respectively. In the extraction of copper(II), several affecting factors including the solution pH, ligand concentration, equilibrium time, effect of foreign ions are optimized. The interfering effects of various cations and anions were also studied and use of masking agents enhances the selectivity of the method. The chromogenic sulphur containing reagent, 4-(4'-chlorobenzylideneimino)-3-methyl-5-mercapto-1, 2, 4-triazole has been synthesized in a single step with high purity and yield. The synthesized reagent has been successfully applied first time for determination of copper(II). The reagent forms stable chelate with copper(II) in buffer medium instantly and quantitatively extracted in chloroform within a minute. The method is successfully applied for the determination of copper(II) in various synthetic mixtures, complexes, fertilizers, environmental samples such as food samples, leafy vegetables, and water samples. The results are compared with those obtained with a reference procedure. Good agreement was attained. All the obtained results are indicative of a convenient, fast method for the extraction and quantification of micro levels of copper(II) from various environmental matrices without use of sophisticated instrumentation and procedure. The method showed a relative standard deviation of 0.42%.

Vortex assisted solid-phase extraction of lead(II) using orthorhombic nanosized Bi2WO6 as a sorbent

Nanosized single crystal orthorhombic Bi₂WO₆ was synthesized by a hydrothermal method and used as a sorbent for vortex assisted solid phase extraction of lead(II). The crystal and molecular structure of the sorbent was examined using XRD, Raman, SEM and SEM-EDX analysis. Various parameters affecting extraction efficiency were optimized by using multivariate design. The effect of diverse ions on the extraction also was studied. Lead was quantified by flame atomic absorption spectrometry (FAAS). The recoveries of lead(II) from spiked samples (at a typical spiking level of 200-400 ng·mL^-1) are >95%. Other figures of merit includes (a) a detection limit of 6 ng·mL^-1, (b) a preconcentration factor of 50, (c) a relative standard deviation of 1.6%, and (d) and adsorption capacity of 6.6 mg·g^-1. The procedure was successfully applied to accurate determination of lead in (spiked) pomegranate and water samples. Graphical abstract Nanosized single crystal orthorhombic Bi₂WO₆ was synthesized and characterized by a hydrothermal method and used as a sorbent for vortex assisted solid phase extraction of lead(II). The procedure was successfully applied to accurate determination of lead in (spiked) pomegranate and water samples.

Doping of three-dimensional porous carbon nanotube-graphene-ionic liquid composite into polyaniline for the headspace solid-phase microextraction and gas chromatography determination of alcohols

In this work, ionic liquid (IL, i.e. 1-hydroxyethyl-3-methylimidazolium tetrafluoroborate), carboxyl multiwall carbon nanotubes (MWCNTs) and reduced graphene oxide (rGO) were used to prepare three-dimensional porous material (MWCNTs-rGO-IL) by one-step self-assembly, then it was co-electrodeposited with polyaniline (PANI) on stainless steel wires by cyclic voltammetry. The resulting coating (PANI-MWCNTs-rGO-IL) was characterized by using FT-IR and scanning electron microscopy etc, and it showed porous structure and had high thermal stability. Furthermore, it was found to be very suitable for the headspace solid-phase microextraction of alcohols (i.e. octanol, nonanol, geraniol, decanol, undecanol and dodecanol). By coupling with gas chromatography, wide linear ranges and low limits of detection (i.e. 2.2-28.3 ng L^-1) were obtained for the alcohols. The coating also presented good repeatability and reproducibility; the relative standard deviations for intra-fiber and fiber-to-fiber were less than 5.6% (n = 5) and 7.0% (n = 5) respectively. In addition, the proposed method was successfully applied to the determination of alcohols in tea drinks, and the recoveries for standards added were 85.6-114%.

Simultaneous Enrichment of Polycyclic Aromatic Hydrocarbons and Cu(2+) in Water Using Tetraazacalix[2]arene[2]triazine as a Solid-Phase Extraction Selector

On the basis of the definite retention mechanism proven by the stationary phase for high-performance liquid chromatography, tetraazacalix[2]arene[2]triazine featuring multiple recognition sites was assessed as a solid-phase extraction (SPE) selector. The applicability of its silica support was used for the extraction of trace amounts of polycyclic aromatic hydrocarbons (PAHs) and Cu(2+) in aqueous samples, followed by high-performance liquid chromatography fluorometric and graphite furnace atomic absorption spectrometric determination. On the basis of the π-π interaction with PAHs and the chelating interaction with Cu(2+), the simultaneous extraction of PAHs and Cu(2+) and stepwise elution through tuning the eluent were successfully achieved, respectively. The SPE conditions affecting the extraction efficiency were optimized, including type and concentration of organic modifier, sample solution pH, flow rate, and volume. As a result of the special adsorption and desorption mechanism, high extraction efficiency was achieved with relative recoveries of 94.3-102.4% and relative standard deviations of less than 10.5%. The limits of detection were obtained with 0.4-3.1 ng L(-1) for PAHs and 15 ng L(-1) for Cu(2+), respectively. The method was applied to the analyses of PAHs and Cu(2+) in Xiliu Lake water samples collected in Zhengzhou, China.