Enzyme-free electrochemical detection of microRNA-21 using immobilized hairpin probes and a target-triggered hybridization chain reaction amplification strategy

Ratiometric electrochemical biosensor based on hybridization chain reaction signal amplification for sensitive microRNA-155 detection

In this work, a sensitive ratiometric electrochemical biosensor for microRNA-155 (miRNA-155) detection is reported based on a hybridization chain reaction amplifying the electrochemical signal. The biosensor was fabricated using Au NPs as a modified material to assemble capture DNA labeled with ferrocene (Fc) molecules, and a DNA probe labeled with methylene blue (MB) was employed for the signal probe. In the presence of target miRNA-155, it can be dual hybridized with capture and signal probe, especially with signal probe to continuously produce long concatemers containing lots of MB molecules. The electrochemical signal of Fc was used for the internal signal, and the signal from MB was used as an indicator signal. As the concentration of miRNA-155 was altered, the internal reference signal of Fc remained constant, and only the indicator signal changed in a sensitive way. The change in the ratio (IMB/IFc) between the indicator signal of MB and internal reference signal of Fc can be used to monitor the concentration of miRNA-155. Under optimal conditions, the prepared ratiometric biosensor could detect miRNA-155 within a wide linear range from 100 fM to 100 nM with low detection limit of 33 fM (at S/N = 3). Moreover, the biosensor was evaluated with human serum samples, and satisfactory recoveries were obtained, indicating that the ratiometric biosensor can be applied to clinical sample analysis.

Ultrasensitive detection of miRNA-21 by click chemistry and fluorescein-mediated photo-ATRP signal amplification

The development of a convenient and efficient assay using miRNA-21 as a lung cancer marker is of great importance for the early prevention of cancer. Herein, an electrochemical biosensor for the detection of miRNA-21 was successfully fabricated under blue light excitation using click chemistry and photocatalytic atom transfer radical polymerization (photo-ATRP). By using hairpin DNA as a recognition probe, the electrochemical sensor deposits numerous electroactive monomers (ferrocenylmethyl methacrylate) on the electrode surface under the reaction of photocatalyst (fluorescein) and pentamethyldiethylenetriamine, thereby achieving signal amplification. This biosensor is sensitive, precise and selective for miRNA-21, and is highly specific for RNAs with different base mismatches. Under optimal conditions, the biosensor showed a linear relationship in the range of 10 fM ∼1 nM (R2 = 0.995), with a detection limit of 1.35 fM. Furthermore, the biosensor exhibits anti-interference performance when analyzing RNAs in serum samples. The biosensor is based on green chemistry and has the advantages of low cost, specificity and anti-interference ability, providing economic benefits while achieving detection objectives, which makes it highly promising for the analysis of complex samples.

Modern Methods for Assessment of microRNAs

The review discusses modern methods for the quantitative and semi-quantitative analysis of miRNAs, which are small non-coding RNAs affecting numerous biological processes such as development, differentiation, metabolism, and immune response. miRNAs are considered as promising biomarkers in the diagnosis of various diseases.

Genosensors, a nanomaterial-based platform for microRNA-21 detection, non-invasive methods in early detection of cancer

MicroRNAs are small non-coding RNAs that are 18-24 nucleotides in length. Among the most widely studied microRNAs, microRNA21 (miR21) is highly expressed in many mammalian cell types. It regulates numerous biological functions such as differentiation, proliferation, apoptosis, and migration. Therefore, sensitive and specific detection of miR-21 is crucial in medical approaches. Several methods such as ISH, northern blotting, RT-PCR, microarray, and next-generation are conventionally used to detect miR-21. Due to the limitations and problems related to routine methods, the development of advanced and modern methods has been one of the investigation goals of researchers in recent years. Nanotechnology-based methods have been among the most critical methods in the last two decades. Biosensors are one of the primary modern methods that largely overcome the limitations of routine procedures. The present study introduces and discusses routine methods for the detection of miR-21and the related up-to-date biosensors developed in recent years (2019-2021).

Electrochemical detection of microRNA-21 based on a Au nanoparticle functionalized g-C3N4 nanosheet nanohybrid as a sensing platform and a hybridization chain reaction amplification strategy

Here, a sensitive sandwich-type electrochemical biosensor for microRNA-21 detection was reported. It was based on the use of a Au NP functionalized graphite-like carbon nitride nanosheet (g-C₃N₄ NS) nanohybrid (Au NPs-g-C₃N₄ NS) as a sensing platform and DNA concatemers containing methylene blue (MB) as a signal probe. The signal probe was prepared by using two different single strand DNAs with a complementary sequence (one of them labeled with MB at the 3' end) to form long concatemers via continuous hybridization chain reaction (HCR); thus numerous MB signal molecules were loaded on long concatemers. The biosensor was fabricated following the next step: a thiolated hairpin probe (HP) was first immobilized on the surface of the glassy carbon electrode (GCE) modified with a Au NPs-g-C₃N₄ NS nanohybrid. After it was blocked with MCH, the modified electrode was sequentially hybridized with microRNA-21 and a signal probe, respectively. As a result, a sandwich structure of HP-microRNA-signal probe covered the surface of the modified electrode. Differential pulse voltammetry (DPV) was employed to measure the sensing signal in phosphate buffered solution (0.10 M PBS, pH 7.4). The experimental conditions were optimized such as the hybridization time and the amount of g-C₃N₄ NS. The proposed biosensor exhibited a wide linear response range (1.0 fM to 500 nM) and a low limit of detection (0.33 fM; at S/N = 3) under the optimal conditions. Meanwhile, the biosensor could discriminate single base mismatched microRNA-21, indicating that the biosensor possessed high selectivity.

Combination of ferrocene decorated gold nanoparticles and engineered primers for the direct reagentless determination of isothermally amplified DNA

A reagent-less DNA sensor has been developed exploiting a combination of gold nanoparticles, modified primers, and isothermal amplification. It is applied to the determination ofKarlodinium armiger, a toxic microalgae, as a model analyte to demonstrate this generic platform. Colloidal gold nanoparticles with an average diameter of 14 ± 0.87 nm were modified with a mixed self-assembled monolayer of thiolated 33-mer DNA probes and (6-mercaptohexyl) ferrocene. Modified primers, exploiting a C3 spacer between the primer-binding site and an engineered single-stranded tail, were used in an isothermal recombinase polymerase amplification reaction to produce an amplicon by two single-stranded tails. These tails were designed to be complementary to a gold electrode tethered capture oligo probe, and an oligo probe immobilized on the gold nanoparticles, respectively. The time required for hybridization of the target tailed DNA with the surface immobilized probe and reporter probe immobilized on AuNPs was optimized and reduced to 10 min, in both cases. Amplification time was further optimized to be 40 min to ensure the maximum signal. Under optimal conditions, the limit of detection was found to be 1.6 fM of target dsDNA. Finally, the developed biosensor was successfully applied to the detection of genomic DNA extracted from a seawater sample that had been spiked with K. armiger cells. The demonstrated generic electrochemical genosensor can be exploited for the detection of any DNA sequence and ongoing work is moving towards an integrated system for use at the point-of-need.

Electrochemical Biosensors for Detection of MicroRNA as a Cancer Biomarker: Pros and Cons

Cancer is the second most fatal disease in the world and an early diagnosis is important for a successful treatment. Thus, it is necessary to develop fast, sensitive, simple, and inexpensive analytical tools for cancer biomarker detection. MicroRNA (miRNA) is an RNA cancer biomarker where the expression level in body fluid is strongly correlated to cancer. Various biosensors involving the detection of miRNA for cancer diagnosis were developed. The present review offers a comprehensive overview of the recent developments in electrochemical biosensor for miRNA cancer marker detection from 2015 to 2020. The review focuses on the approaches to direct miRNA detection based on the electrochemical signal. It includes a RedOx-labeled probe with different designs, RedOx DNA-intercalating agents, various kinds of RedOx catalysts used to produce a signal response, and finally a free RedOx indicator. Furthermore, the advantages and drawbacks of these approaches are highlighted.

An ultrasensitive guanine wire-based resonance light scattering method using G-quadruplex self-assembly for determination of microRNA-122

An enzyme-free resonance light scattering (RLS) method is described for the determination of microRNA-122. A guanine nanowire (G-wire) is used that consists of a predesigned DNA1 and a G-quadruplex sequence DNA2. These hybridize with microRNA-122 and partially hybridize with DNA2. After formation of stable double strands with DNA1, DNA2 is released. On addition of K⁺ and Mg²⁺ ions, the G-quadruplex sequences undergo self-assembly to form long filamentous G-wires. This increases the intensity of RLS. A 6.1 pM detection limit was obtained, and the linear response covers the 50 pM to 300 nM microRNA concentration range. The method was successfully applied to the quantitation of microRNA-122 in hepatocellular carcinoma cell lysates. Conceivably, this assay can be extended to other RLS methods for biomarker detection by simply changing the sequence of DNA1. Graphical abstract The G-quadruplex sequences of DNA2 were locked with DNA1. The G-quadruplex fragments of DNA2 were released after the hybridization of microRNA-122 with DNA1. These liberated G-quadruplex sequences were self-assembled into long filamentous guanine nanowires (G-wires) which increased resonance light intensity in the presence of Mg²⁺.

DNA concatemer-silver nanoparticles as a signal probe for electrochemical prostate-specific antigen detection

A ultrasensitive electrochemical detection of prostate-specific antigen was reported based on hybridization chain reaction amplifying silver nanoparticles response signal.

Photoelectrochemical biosensor for microRNA detection based on multiple amplification strategies

A photoelectrochemical biosensor is described for sensitive detection of microRNA-162a. A multiple amplification strategy is employed that involves (a) isothermal strand displacement polymerase reaction; (b) terminal deoxynucleotidyl transferase-mediated extension, (c) amplification of streptavidin-coated gold nanoparticles, and (d) biotin functionalized alkaline phosphatase. Graphite-like C₃N₄ (g-C₃N₄) nanosheets were used as photoactive material. By using these amplification strategies, the detection limit is as low as 0.18 fM of microRNA, and the photocurrent increases linearly with the concentration of microRNA-162a in the range from 0.5 fM to 1 pM. The method was successfully applied to quantify the expression level of microRNA-162a in total RNA extracted from the leaves of maize seedlings after incubation with the chemical mutagen ethyl methanesulfonate. The results confirmed the applicability of the method to the analysis of practical biological samples. Graphical Abstract Schematic of a photoelectrochemical microRNA assay based on a multiple amplification strategy involving (a) isothermal strand displacement polymerase reaction; (b) terminal deoxynucleotidyl transferase-mediated extension,

MoS2 quantum dots modified with a labeled molecular beacon as a ratiometric fluorescent gene probe for FRET based detection and imaging of microRNA

A dual-channel ratiometric nanoprobe is described for detection and imaging of microRNA. It was prepared from MoS₂ quantum dots (QDs; with blue emission and excitation/emission peaks at 310/398 nm) which acts as both the gene carrier and as a donor in fluorescence resonance energy transfer (FRET). Molecular beacons containing loops for molecular recognition of microRNA and labeled with carboxyfluorescein (FAM) were covalently attached to the MoS₂ QDs and serve as the FRET acceptor. In the absence of microRNA, the nanoprobe exhibits low FRET efficiency due to the close distance between the FAM tag and the QDs. Hybridization with microRNA enlarges the distance between QD and beacon. This results in an enhancement of the FRET efficiency of the nanoprobe. The ratio of green and blue fluorescence (I₅₂₀/I₃₉₈) increases linearly in the 5 to 150 nM microRNA concentration range in both aqueous solution and diluted artificial cerebrospinal fluid. The limit of detection (LOD) is as low as 0.38 nM and 0.52 nM, respectively. Other features of this nanoprobe include (a) excellent resistance to nuclease-induced false positive signals and (b) the option to use it for distinguishing different cell lines by in-situ imaging of intracellular microRNAs. Graphical abstract Schematic of a dual-channel photoluminescence nanoprobe for the determination of microRNA-21 (miR-21) by monitoring the microRNA-triggered enhancement of the fluorescence resonance energy transfer (FRET) efficiency between MoS₂ QDs and carboxyfluorescein-labeled molecular beacons.

Microfluidic electrophoretic non-enzymatic kanamycin assay making use of a stirring bar functionalized with gold-labeled aptamer, of a fluorescent DNA probe, and of signal amplification via hybridization chain reaction

The authors describe an enzyme-free aptamer-based assay for the determination of the model antibiotic kanamycin (Kana). The method is making use of (a) microfluidic chip electrophoresis; (b) a stirring bar carrying a gold-labeled aptamer probe, and (c) the hybridization chain reaction (HCR) for signal amplification. Firstly, a stirring bar (length: 1 cm; diameter: 0.2 mm) was modified with a large amount of duplex DNA and then hybridized with aptamer and its partially complementary chains (cDNA). In the presence of Kana, the binding between the Kana and aptamer unwinds the duplex structures and releases a corresponding amount of cDNA into the supernatant. The released cDNA triggers the HCR in the presence of H1 and H2 DNA hairpin to produce a large amount of duplex DNA chains with different lengths. At the same time, the amounts of H1 and H2 are reduced. The decreased signal of H1/H2 after several HCR cycles can be used to quantify kana in the 1 pg·mL^-1 to 10 ng·mL^-1, with a detection limit of 0.29 pg·mL^-1. The signal is generated by reading the fluorescence, best at excitation/emission maxima of 470/525 nm. The whole detection process takes 3 min only. The assay was employed to the detection of Kana in spiked milk and fish samples. Results are consistent with those of an enzyme linked immunosorbent assay. The assay has high throughput, high selectivity, and high amplification capability. Graphical abstract Schematic of a stirring bar functionalized with gold-labeled aptamer acting as the capture probe. It can capture the target and release primer simultaneously. The primer triggers the hybridization chain reaction inducing the consumption of H1 and H2. After a certain reaction time, the mixture is injected into the MCE platform for microfluidic electrophoretic separation and fluorometric detection.

An electrochemical biosensor for microRNA-196a detection based on cyclic enzymatic signal amplification and template-free DNA extension reaction with the adsorption of methylene blue

A simple and sensitive electrochemical biosensor was developed for microRNA-196a detection, which is of important diagnostic significance for pancreatic cancer. It was based on cyclic enzymatic signal amplification (CESA) and template-free DNA extension reaction. In the presence of microRNA-196a, duplex-specific nuclease (DSN) catalyzed the digestion of the 3'-PO₄ terminated capture probe (CP), resulting in the target recycling amplification. Meanwhile, the 3'-OH terminal of CP was exposed. Then, template-free DNA extension reaction was triggered by terminal deoxynucleotidyl transferase (TdT), producing amounts of single-stranded DNA (ssDNA). After ssDNA absorbed numerous methylene blue (MB), an ultrasensitive electrochemical readout was obtained. Based on this dual amplification mechanism, the proposed biosensor exhibited a high sensitivity for detection of microRNA-196a down to 15 aM with a linear range from 0.05 fM to 50 pM. This biosensor displayed high specificity, which could discriminate target microRNAs from one base mismatched microRNAs. It also showed good reproducibility and stability. Furthermore, it was successfully applied to the determination of microRNA-196a in plasma samples. In conclusion, with the excellent analytical performance, this biosensor might have the potential for application in clinical diagnostics of pancreatic cancer.

A cascade amplification strategy of catalytic hairpin assembly and hybridization chain reaction for the sensitive fluorescent assay of the model protein carcinoembryonic antigen

A cascade nucleic acid amplification strategy is presented for fluorometric aptamer based determination of the model protein carcinoembryonic antigen (CEA). Amplification is accomplished by combining catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR). In this assay, a specially designed single-stranded DNA containing the aptamer sequence (AS) specific for CEA is hybridized with an inhibitor strand (IS) to form a double-stranded DNA (IS@AS). In the presence of CEA, it will recognize and bind to the AS strand which causes the release of IS. By introducing two DNA hairpins (H1 and H2; these containing complementary sequences) CHA will be activated via the hybridization reactions of H1 and H2. This is accompanying by the formation of a double-stranded DNA (H1-H2) and the release of CEA@AS. The liberated CEA@AS further drives successive recycling of the CHA, thereby generating further copies of H1-H2. The resultant H1-H2 hybrids act as primers and trigger HCR with the help of other two DNA hairpins (H3 and H4) containing G-rich toehold at the 5'-terminus and 3'-terminus of H3 and H4, respectively. The fluorescent probe N-methyl mesoporphyrin IX (NMM) is finally intercalated into the G-rich domains of the long DNA nanostructures due to formation of G-quadruplex structures. This generates a fluorescent signal (best measured at excitation/emission wavelengths of 399/610 nm) that increases with the concentration of target (CEA). This aptamer-based fluorescence assay is highly sensitive and has a linear range that covers the 1 pg·mL^-1 to 2 ng·mL^-1 CEA concentration range, with a 0.3 pg·mL^-1 detection limit. Graphical abstract By integrating catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR) for effective signal enhancement, a novel cascade amplification strategy is presented to develop a sensitive and selective fluorescent method for the assay of the model protein carcinoembryonic antigen (CEA).

Tetrahedral DNA probe coupling with hybridization chain reaction for competitive thrombin aptasensor

A novel competitive aptasensor for thrombin detection is developed by using a tetrahedral DNA (T-DNA) probe and hybridization chain reaction (HCR) signal amplification. Sulfur and nitrogen co-doped reduced graphene oxide (SN-rGO) is firstly prepared by a simple reflux method and used for supporting substrate of biosensor. Then, T-DNA probe is modified on the electrode by Au-S bond and a competition is happened between target thrombin and the complementary DNA (cDNA) of aptamer. The aptamer binding to thrombin forms an aptamer-target conjugate and make the cDNA remained, and subsequently hybridizes with the vertical domain of T-DNA. Finally, the cDNAs trigger HCR, which results in a great current response by the catalysis of horseradish peroxidase to the hydrogen peroxide + hydroquinone system. For thrombin detection, the proposed biosensor shows a wide linearity range of 10^-13-10^-8M and a low detection limit of 11.6fM (S/N = 3), which is hopeful to apply in biotechnology and clinical diagnosis.

Recent advances in signal amplification strategy based on oligonucleotide and nanomaterials for microRNA detection-a review

MicroRNAs (MiRNAs) play multiple crucial regulating roles in cell which can regulate one third of protein-coding genes. MiRNAs participate in the developmental and physiological processes of human body, while their aberrant adjustment will be more likely to trigger diseases such as cancers, kidney disease, central nervous system diseases, cardiovascular diseases, diabetes, viral infections and so on. What's worse, for the detection of miRNAs, their small size, high sequence similarity, low abundance and difficult extraction from cells impose great challenges in the analysis. Hence, it's necessary to fabricate accurate and sensitive biosensing platform for miRNAs detection. Up to now, researchers have developed many signal-amplification strategies for miRNAs detection, including hybridization chain reaction, nuclease amplification, rolling circle amplification, catalyzed hairpin assembly amplification and nanomaterials based amplification. These methods are typical, feasible and frequently used. In this review, we retrospect recent advances in signal amplification strategies for detecting miRNAs and point out the pros and cons of them. Furthermore, further prospects and promising developments of the signal-amplification strategies for detecting miRNAs are proposed.