Exploring a monothiolated β-cyclodextrin as the template to synthesize copper nanoclusters with exceptionally increased peroxidase-like activity

A Colorimetric/Fluorescence Dual Detection for Acid Phosphatase Based on Copper Nanoclusters

A simple and effective fluorescent/colorimetric dual detection was established toward acid phosphatase (ACP). Photoluminescent copper nanoclusters with blue emission were synthesized. These nanoclusters were also found with peroxidase-like activity and capable of accelerating the conversion of 3,3',5,5'-tetramethylbenzidine (TMB) into a colored oxidized form (oxTMB). As a strong ligand toward copper, pyrophosphate (PPi) inhibited this catalysis. When ACP was present, it hydrolyzed PPi into non-binding phosphate, and thus the inhibited catalysis was recovered. This brought in an increase in absorbance from oxTMB for a colorimetric signaling. Meanwhile, due to a good overlap of the emission of the CuNCs and absorption of oxTMB, the fluorescence signal was attenuated through inner filter effect (IFE). Both the increase of the absorption and decrease in fluorescence were applied for the quantification of ACP activity. The colorimetric signals provided a linear response toward ACP in the range 0.1-10 U/L, with a detection limit of 0.01 U/L, while the fluorimetry responded within 0.005-10 U/L, with a detection limit of 0.001 U/L. Because the same reagents and steps were applied, the method allowed a facile switching between these two modes, depending the performances required and instrumentations available. The applicability of the detection was validated through analysis of human serum samples.

Simultaneous Detection of Citric Acid and Oxalic Acid Based on Dual Spectrum and Biomimetic Peroxidase for Urolithiasis Screening with a Fully Automatic Urine Analyzer

Urolithiasis stands as a prevalent ailment within the urinary system, with hyperoxaluria and hypocitraturia being the most frequent manifestations characterized by excessive oxalic acid (OA) and deficient citric acid (CA) levels in urine. Detecting these compounds in urine quantitatively holds paramount importance for early urolithiasis screening. Existing methodologies fall short in achieving simultaneous and on-site identification of OA and CA, posing challenges for accurate urolithiasis screening. Addressing this concern, the study successfully accomplishes the concurrent identification of OA and CA in urine through a combination of dual-spectral analysis and biomimetic peroxidase utilization. Bovine serum albumin and dithiothreitol-modified copper nanoclusters (BSA-DTT-CuNCs) are employed as biomimetic peroxidases, effectively mitigating interference and enabling the simultaneous determination of OA and CA. The quantification range spans from 0 to 12 mm for OA and 0.5 to 2.5 mm for CA, with detection limits of 0.18 and 0.11 mm, respectively. To facilitate swift and on-location urine analysis, a fully automated urine analyzer (FAUA) is introduced that streamlines the process of biomarker pretreatment and identification within urine samples. Validation with real urine samples from urolithiasis patients demonstrates the method's diagnostic precision, highlighting the dual-spectral technique and analyzer's promising role in urolithiasis screening.

Cyclodextrin Host-Guest Recognition in Glucose-Monitoring Sensors

Diabetes mellitus is a prevalent chronic health condition that has caused millions of deaths worldwide. Monitoring blood glucose levels is crucial in diabetes management, aiding in clinical decision making and reducing the incidence of hypoglycemic episodes, thereby decreasing morbidity and mortality rates. Despite advancements in glucose monitoring (GM), the development of noninvasive, rapid, accurate, sensitive, selective, and stable systems for continuous monitoring remains a challenge. Addressing these challenges is critical to improving the clinical utility of GM technologies in diabetes management. In this concept, cyclodextrins (CDs) can be instrumental in the development of GM systems due to their high supramolecular recognition capabilities based on the host-guest interaction. The introduction of CDs into GM systems not only impacts the sensitivity, selectivity, and detection limit of the monitoring process but also improves biocompatibility and stability. These findings motivated the current review to provide a comprehensive summary of CD-based blood glucose sensors and their chemistry of glucose detection, efficiency, and accuracy. We categorize CD-based sensors into four groups based on their modification strategies, including CD-modified boronic acid, CD-modified mediators, CD-modified nanoparticles, and CD-modified functionalized polymers. These findings shed light on the potential of CD-based sensors as a promising tool for continuous GM in diabetes mellitus management.

Ionic-Liquid-Stabilized TiO2 Nanostructures: A Platform for Detection of Hydrogen Peroxide

Hydrogen peroxide (H2O2) acts as a signaling molecule to direct different biological processes. However, its excess amount results in oxidative stress, which causes the onset of different types of cancers. TiO2 nanostructure was synthesized by a facile hydrothermal method. The prepared material was characterized by FTIR spectroscopy, XRD, SEM, EDX, TGA, and Raman spectroscopy, which confirmed the formation of nanostructured material. Subsequently, the prepared nanoparticles (NPs) were capped with 1-H-3-methylimidazolium acetate ionic liquid (IL) to achieve its deagglomeration and functionalization. A new colorimetric sensing probe was prepared for the detection of H2O2 based on ionic liquid-capped TiO2 nanoparticles (TiO2/IL) and 3,3',5,5'-tetramethylbenzidine (TMB) dye, which acts as an oxidative chromogenic substrate. H2O2 reacts with TMB, in the presence of ionic liquid-coated TiO2 NPs, to form a blue-green product. The color was visualized with the naked eye, and the colorimetric change was confirmed by a UV-vis spectrophotometer. To obtain the best response of the synthesized sensor, different parameters (time, pH, concentrations, loading of nanomaterials) were optimized. It showed a low limit of detection 8.61 × 10-8 M, a high sensitivity of 2.86 × 10-7 M, and a wide linear range of 1 × 10-9-3.6 × 10-7 M, with a regression coefficient (R 2) value of 0.999. The proposed sensor showed a short incubation time of 4 min. The sensing probe did not show any interference from the coexisting species. The TiO2/IL sensor was effectively used for finding H2O2 in the urine samples of cancer patients.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

Highly Stable Pyrimidine Based Luminescent Copper Nanoclusters with Superoxide Dismutase Mimetic and Nitric Oxide Releasing Activity

Copper nanoclusters (CuNCs) are emerging as an interesting class of materials for various biomedical applications. In this work, we have designed highly stable nucleobase-capped luminescent CuNCs and studied the effect of substituents on the cluster composition and photophysical properties. The NCs exhibit exceptional stability in ambient atmosphere and show significant variation in the emission properties with a change in position of substituents on the ligand, thiouracil. This study represents the first example of a nanocluster that functionally mimics the activity of a major antioxidant enzyme, superoxide dismutase (SOD). In addition to their enzyme-mimetic activity, the CuNCs evince controlled release of nitric oxide (NO), a key gaseous molecule of endothelial system from S-nitrosothiol, S-nitrosoglutathione (GSNO). Further, to a greater significance, these luminescent CuNCs are readily taken up by the mammalian cells and exhibit low toxicity. The superoxide dismutase and NO releasing activity of the fluorescent, biocompatible copper nanoclusters suggest their potential application in both therapeutics and bioimaging.

Development of Copper Nanoclusters for In Vitro and In Vivo Theranostic Applications

Theranostics refers to the incorporation of therapeutic and diagnostic functions into one material system. An important class of nanomaterials exploited for theranostics is metal nanoclusters (NCs). In contrast to gold and silver NCs, copper is an essential trace element for humans. It can be more easily removed from the body. This, along with the low cost of copper that offers potential large-scale nanotechnology applications, means that copper NCs have attracted great interest in recent years. The latest advances in the design, synthesis, surface engineering, and applications of copper NCs in disease diagnosis, monitoring, and treatment are reviewed. Strategies to control and enhance the emission of copper NCs are considered. With this synopsis of the up-to-date development of copper NCs as theranostic agents, it is hoped that insights and directions for translating current advances from the laboratory to the clinic can be further advanced and accelerated.

A label-free hairpin aptamer probe for colorimetric detection of adenosine triphosphate based on the anti-aggregation of gold nanoparticles

A facile and rapid colorimetric approach was described for selective and sensitive determination of adenosine triphosphate (ATP) based on a hairpin aptamer probe and the anti-aggregation of AuNPs. Poly(diallyldimethylammonium chloride) (PDDA) can induce the aggregation of AuNPs due to the electrostatic interaction causing a red to blue color change. Upon the addition of ATP, aptamer-based hairpin probe is opened and releases flexible ssDNA ends. The released flexible ssDNA ends can interact with PDDA and prevent PDDA-induced AuNPs aggregation. Thus, a visible color change from blue to red and a decrease in the absorption ratio (A₆₁₀/A₅₂₀) are observed. Under the optimal conditions, the hairpin aptamer-based colorimetric assay exhibits high sensibility and selectivity for the detection of ATP with a detection limit of 1.7nM. Moreover, this assay is successfully used in the rapid determination of ATP in spiked human serum samples with good recoveries in the range of 102.88 to 104.07%.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

The recent development of efficient Earth-abundant transition-metal nanocatalysts

Whereas noble metal compounds have long been central in catalysis, Earth-abundant metal-based catalysts have in the same time remained undeveloped. Yet the efficacy of Earth-abundant metal catalysts was already shown at the very beginning of the 20th century with the Fe-catalyzed Haber-Bosch process of ammonia synthesis and later in the Fischer-Tropsch reaction. Nanoscience has revolutionized the world of catalysis since it was observed that very small Au nanoparticles (NPs) and other noble metal NPs are extraordinarily efficient. Therefore the development of Earth-abundant metals NPs is more recent, but it has appeared necessary due to their "greenness". This review highlights catalysis by NPs of Earth-abundant transition metals that include Mn, Fe, Co, Ni, Cu, early transition metals (Ti, V, Cr, Zr, Nb and W) and their nanocomposites with emphasis on basic principles and literature reported during the last 5 years. A very large spectrum of catalytic reactions has been successfully disclosed, and catalysis has been examined for each metal starting with zero-valent metal NPs followed by oxides and other nanocomposites. The last section highlights the catalytic activities of bi- and trimetallic NPs. Indeed this later family is very promising and simultaneously benefits from increased stability, efficiency and selectivity, compared to monometallic NPs, due to synergistic substrate activation.

Layered vanadium(IV) disulfide nanosheets as a peroxidase-like nanozyme for colorimetric detection of glucose

The authors have discovered that vanadium disulfide (VS₂) nanosheets, synthesized by a hydrothermal method, exert stable peroxidase-like activity. The catalytic activity, with H₂O₂ as a cosubstrate, follows Michaelis-Menten kinetics and varies with temperature, pH value and H₂O₂ concentration. Two-dimensional VS₂ sheets acting as peroxidase (POx) mimics can replace horseradish peroxidase due to their availability, robustness, and reusability. The POx-like activity of VS₂ sheets was exploited to design a colorimetric glucose assay by using 3,3',5,5'-tetramethylbenzidine as a substrate and by working at an analytical wavelength of 652 nm. The assay covers the 5 to 250 μM glucose concentration range with a 1.5 μM detection limit. It was applied to the analysis of glucose in fruit juice. In our perception, the peroxidase-like nanozyme out of the family of transition metal dichalcogenides presented here has a wide scope in that it may stimulate promising biocatalytic applications in biotechnology and analytical chemistry. Graphical abstract Layered VS₂ nanosheets were prepared via hydrothermal synthesis and are shown to exert superior peroxidase-mimicking activity. Using these POx nano-mimics, a sensitive colorimetric assay for glucose was developed and applied to fruit juice analysis. This work unlocks the access of VS₂ to biocatalysis and bioassays.

The recent development of efficient Earth-abundant transition-metal nanocatalysts

This review presents the recent remarkable developments of efficient Earth-abundant transition-metal nanocatalysts.