Waxberry-like magnetic porous carbon composites prepared from a nickel-organic framework for solid-phase extraction of fluoroquinolones

Cationic conjugated microporous polymers for efficient quinolone antibiotics extraction: Experimental and DFT study

The development of exquisitely sensitive analytical methods for the surveillance of quinolone antibiotics (QAs) holds pivotal significance in safeguarding both ecosystems and human well-being. In this work, a cationic conjugated microporous polymer (iCMP) was constructed through a facile post-synthetic approach. Capitalizing on its unique dual-porosity architecture, cationic framework, and π-conjugated backbone, iCMP exhibited exceptional adsorption capabilities and remarkable repeatability. Integrating with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), a solid-phase extraction (SPE) method founded on iCMP was meticulously developed for the sensitive and accurate detection of QAs within complex matrices. This proposed analytical method exhibited remarkably low limits of detection, specifically 0.0200-0.128 ng·L-1 for water samples and 0.0250-0.105 ng·g-1 for meat samples, along with good accuracy in the range of 70.9 %-115 %. The underlying adsorption mechanism was comprehensively investigated using a synergistic approach that combined systematic adsorption experiments, density functional theory (DFT) calculations, and in-depth material characterizations. Overall, this study presents viable strategies for the precise trace-level analysis of QAs in complex environmental and food samples.

Hydroxyl-containing triazine-based conjugated microporous polymers for solid phase extraction of fluoroquinolone antibiotics in the environment and food samples

Fluoroquinolones (FQs) are a category of broadly used antibiotics. Development of an effective and sensitive approach for determination of trace FQs in environmental and food samples is still challenging. Herein, the hydroxyl-containing triazine-based conjugated microporous polymers (CMPs-OH) was constructed and served as SPE absorbent for the efficient enrichment of FQs. Based on DFT simulations, the excellent enrichment capacity between CMPs-OH and FQs was contributed by hydrogen bonding and π-π interactions. In combination with high-performance liquid chromatography-tandem mass spectrometry, the proposed approach exhibited a wide linear range (0.2-400 ng L-1), low detection limits (0.05-0.15 ng L-1), and good intraday and interday precisions under optimal conditions. In addition, the established method was effectively utilized for the determination of FQs in fourteen samples with recoveries between 82.6 % and 109.2 %. This work provided a feasible sample pretreatment method for monitoring FQs in environmental and food matrices.

Fabrication of a β-CD-functionalized magnetic microporous organic network for effective enrichment and detection of fluoroquinolone antibiotics in water samples

Fluoroquinolone (FQ) antibiotics, one of the leading environmental pollutants, have ecotoxic effects that can accumulate through ecosystems and harm human health. The determination of FQs is still difficult due to the complex matrix, many interfering factors, and low concentration. Hence, a magnetic microporous organic network (MON) composite denoted as Fe3O4@MON-NH2@CM-β-CD with excellent FQ adsorption performance was prepared by β-CD covalent modification of a MON. Based on the existence of π-π packing, hydrophobic interaction, and hydrogen bonding between Fe3O4@MON-NH2@CM-β-CD and FQs, a new magnetic solid phase extraction (MSPE) method for the enrichment of FQs was developed. Under optimized MSPE conditions, five FQs were detected by HPLC-UV with good linearity (R2 ≥ 0.9989) in the range of 0.02-1 μg mL-1, and detection limits (S/N = 3) in the range of 0.0014-0.0023 μg mL-1. The satisfactory recoveries ranged from 93.1 to 116.2% with RSDs lower than 8.39% when applied to actual environmental water samples. These results revealed that Fe3O4@MON-NH2@CM-β-CD as an adsorbent for MSPE had excellent performance for FQ extraction from real samples, and the MON material types were expanded through the functionalization of MONs, which would have great potential for further application in various analytical methods.

A magnetic porous carbon material derived from an MIL-101(Fe) complex for efficient magnetic solid phase extraction of fluoroquinolone antibiotics

Extraction and determination of trace hazardous components from complex matrices continue to attract public attention. In this work, magnetic porous carbon (MPC) was prepared for efficient magnetic solid phase extraction (MSPE) of fluoroquinolone (FQ) antibiotics in food and water samples. To prepare the MPC, an Fe-based metal-organic framework (MIL-101(Fe)) was grown on a network of graphene oxide and multi-walled carbon nanotubes through a hydrothermal method, and then a carbonization process under a nitrogen atmosphere was carried out to obtain the MPC with high specific surface area and good magnetism. Four target FQs including ciprofloxacin (CIP), enrofloxacin (ENO), lomefloxacin (LOM) and ofloxacin (OFX) were enriched using the as-prepared MPC and determined by coupled high-performance liquid chromatography. Under the optimal conditions, the established MSPE-HPLC-UV detection method exhibited a linear range of 0.5-800 μg L-1 and detection limits of 0.11-0.18 μg L-1 with relative standard deviations (RSDs) of 0.5-4.8%. When applied in the determination of the above four FQs in real samples such as lake water, milk and pork, good recoveries between 85.2 and 103.7% were obtained, and the RSDs were less than 4.8%. This work indicates that the MPC material can be a good adsorption material and has good application prospects in antibiotics enrichment and/or removal from complex samples.

Core-shell magnetic porous organic polymer for magnetic solid-phase extraction of fluoroquinolone antibiotics in honey samples followed by high-performance liquid chromatography with fluorescence detection

By monomer-mediated in-situ growth synthesis strategy, with hydroquinone and 1,3,5-tris(4-aminophenyl)benzene as monomers, a core-shell magnetic porous organic polymer was synthesized through a simple azo reaction. Based on this, a magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method was proposed for the analysis of fluoroquinolones in a honey sample. With ofloxacin, ciprofloxacin, enrofloxacin, lomefloxacin, and difloxacin as target analytes, factors affecting the extraction efficiency had been optimized. The LODs were 1.5-5.4 ng/L (corresponding to 0.23-0.81 μg/kg in honey). The linear range was 0.005-20 μg/L for difloxacin, 0.01-20 μg/L for ofloxacin, ciprofloxacin and lomefloxacin, and 0.02-20 μg/L for enrofloxacin. The enrichment factor was 84.4-91.7-fold with a high extraction efficiency of 84.4-91.7%. The method was assessed by the analysis of target fluoroquinolones in honey samples, and the recoveries for the spiked samples were 79.3-95.8%. The results indicated that the established magnetic solid-phase extraction-high-performance liquid chromatography-fluorescence detection method is efficient for the analysis of trace fluoroquinolones in honey.

Macro-microporous zeolitic imidazole framework-8/cellulose aerogel for semi-automated pipette tip solid phase extraction of fluoroquinolones in water

In this study, Zeolitic Imidazole Framework-8/cellulose aerogel (ZIF-8/CA) hybrid was successfully fabricated through a simple doping method and ZIF-8 acted as the major component for adsorption. In order to elucidate the adsorption mechanism deeply, molecular simulation was adopted to the expound the interaction modes between ZIF-8 and the fluoroquinolones (FQs). ZIF-8/CA was used as the adsorbent for semi-automated pipette tip solid phase extraction (PT-SPE). In combination with high performance liquid chromatography tandem fluorescence detector (HPLC-FLD), the established method was successfully employed to determine trace amount of FQs in water samples. Extraction parameters such as the content of ZIF-8, pH of sample solution, volume of sample, flow rate of sampling, type and volume of elution solvent were investigated. Under the optimized conditions, satisfactory linearity was achieved with the correlation coefficient (R²) ranging from 0.9954 to 0.9992. The limits of detection were in the range of 0.337-1.707 ng L^-1. And the recoveries varied from 75.9% to 96.8% with RSD less than 8.0%. The established method was demonstrated to be sensitive, efficient and convenient.

A magnetic MOF derivative with rich interactions formed under mild preparation conditions for the extraction of non-steroidal anti-inflammatory drugs from the Yellow River

For sorbents, good magnetic properties and rich interactions with targets are important ways to improve the efficiency of magnetic solid-phase extraction (MSPE). The magnetic MOF-101 derivative (MD) was obtained by heat-treating MOF-101 at different temperatures. After a series of characterizations, it was found that MD-350 had the best magnetic properties and retained more functional groups of the original MOF-101, and had better extraction efficiency as compared to MD obtained under other treatment temperatures for the MSPE of four non-steroidal anti-inflammatory drugs (NSAIDs) in water samples, coupled with high-performance liquid chromatography (HPLC). The remaining functional groups of MD-350 can produce more interactions with NSAIDs, such as hydrogen bonding, π-π conjugation, and coordination interactions; good magnetic properties facilitate the separation of the sorbent and the solution. These advantages indicate that the established extraction method demonstrated satisfactory extraction performance: an excellent recovery rate (96.73-100.61%) with a short extraction time (15 min), a wide linear range (4-400 μg L-1) with a determination coefficient of 0.9975-0.9993, a low LOD of 0.2-0.5 μg L-1 and up to 12 times service-life without the loss of the recovery rate. Satisfactory results were also obtained in extracting NSAIDs from Yellow River. All these results indicate that MD-350 prepared under mild conditions has potential as an MSPE sorbent to detect and remove NSAIDs from environmental waters with high efficiency and long service life.

MOF-derived hollow NiCo2O4/C composite for simultaneous electrochemical determination of furazolidone and chloramphenicol in milk and honey

Herein, bimetallic Co/Ni-MOF derived hollow NiCo₂O₄@C composite modified glassy carbon electrode (NiCo₂O₄@C/GCE) is constructed and applied to simultaneously detect furazolidone (FZD) and chloramphenicol (CAP) for the first time. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, nitrogen adsorption-desorption and X-ray photoelectron spectroscopy confirm that NiCo₂O₄@C has hollow and mesoporous structure, abundant carbon matrixes, sufficient oxygen defects and mixed-valence metallic elements. These advantages make NiCo₂O₄@C/GCE show distinguished electrocatalytic performance toward the simultaneous determination of FZD and CAP. The NiCo₂O₄@C/GCE shows wide linear ranges of 0.5-240 µM for FZD and 0.5-320 µM for CAP, low limit of detection of 8.47 nM for FZD and 35 nM for CAP. The mechanism studies show that reductions of FZD and CAP on NiCo₂O₄@C/GCE are both four-electron and four-proton processes. Moreover, the sensor obtains desirable recoveries for the simultaneous determination of FZD (95.85%-103.9%) and CAP (95.72%-104.4%) in milk and honey by standard addition method.

Determination of sulfadimethoxine in milk with aptamer-functionalized Fe3 O4 /graphene oxide as magnetic solid-phase extraction adsorbent prior to HPLC

An aptamer (Apt) functionalized magnetic material was prepared by covalently link Apt to Fe₃ O₄ /graphene oxide (Fe₃ O₄ /GO) composite by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxysuccinimide, and then characterized by FTIR spectroscopy, X-ray diffraction, and vibration sample magnetometry. The obtained composite of Fe₃ O₄ /GO/Apt was employed as magnetic solid-phase extraction adsorbent for the selective preconcentration of sulfadimethoxine prior to analysis by high-performance liquid chromatography. Under the optimal conditions (sample pH of 4.0, sorbent dosage of 20 mg, extraction time of 3 h, and methanol-5% acetic acid solution as eluent), a good linear relationship was obtained between the peak area and concentration of sulfadimethoxine in the range of 5.0 to 1500.0 µg/L with correlation coefficient of 0.9997. The limit of detection (S/N = 3) was 3.3 µg/L. The developed method was successfully applied to the analysis of sulfadimethoxine in milk with recoveries in the range of 75.9-92.3% and relative standard deviations less than 8.1%. The adsorption mechanism of Fe₃ O₄ /GO/Apt toward sulfadimethoxine was studied through the adsorption kinetics and adsorption isotherms, and the results show that the adsorption process fits well with the pseudo-second-order kinetic model and the adsorbate on Fe₃ O₄ /GO/Apt is multilayer and heterogeneous.

A dual mode photoelectrochemical sensor for nitrobenzene and L-cysteine based on 3D flower-like Cu2SnS3@SnS2 double interfacial heterojunction photoelectrode

In this work, 3D hierarchical Cu₂SnS₃@SnS₂ flower assembled from nanopetals with sandwich-like Cu₂SnS₃-SnS₂-Cu₂SnS₃ double interfacial heterojunction was successfully designed and synthesized on fluoride doped tin oxide (FTO) for photoelectrochemical (PEC) sensor by in situ electrodeposition p-type Cu₂SnS₃ nanoparticles on both inner and outer surfaces of n-type SnS₂ nanopetals. The unique double interfacial heterojunction simultaneously combines 3D flower-like architectures to drastically increase the light trapping and absorption in visible-near infrared range (Vis-NIR), and dramatically inhibites the charge carrier recombination, which is crucial for boosting the PEC activity. Benefitting from the shape and compositional merits, the Cu₂SnS₃@SnS₂ heterojunction possess dual-mode signal by controlling the electrodeposition time to manipulate the composition ratio of Cu₂SnS₃ and SnS₂. The Cu₂SnS₃@SnS₂/FTO electrode not only exhibits excellent photoeletro-reduction capacity for ultra-sensitive sensing trace persistent organic pollutant (nitrobenzene, NB), but also presents photoeletro-oxidization activity for high selective detection of L-cysteine (L-Cys) without any auxiliary enzyme under the light illumination. Dual mode sensor displayed superb performance for the detection of NB/L-Cys, showing a wide linear range from 100 pM to 300 μM/10 nM to 100 μM and a low detection limit (3S/N) of 68 pM/8.5 nM, respectively. Such a tunable double interfacial heterojunction design opened up new avenue for constructing multifunction PEC sensing platform.

Preparation of highly fluorinated and boron-rich adsorbent for magnetic solid-phase extraction of fluoroquinolones in water and milk samples

Effective extraction is an indispensable procedure for the sensitive analysis of fluoroquinolones (FQs) in complex samples. According to the molecular properties of FQs, a new highly fluorinated and boron-rich adsorbent (FBA) was synthesized and employed as the extraction phase of magnetic solid-phase extraction (MSPE). Results revealed that the prepared FBA displayed satisfactory extraction capability for FQs through fluorophilic and B-N coordination interactions. Besides, the synthesized FBA also exhibited strong magnetic responsiveness and good life-span. Under the most favorable conditions, the FBA/MSPE was combined with high-performance liquid chromatography with diode array detection (HPLC-DAD) to sensitively quantify trace levels of FQs in environmental water and milk samples. The developed approach showed good linearity within the studied concentration range, satisfactory precision and low limits of detection (0.0049-0.016 μg/L for water sample and 0.010-0.046 μg/kg for milk sample). In the analysis of target FQs in real samples, the recoveries of different fortified concentrations were in the ranges of 80.1-120% and 78.9-119% for water and milk samples, respectively. The relative standard deviations for reproducibility were all below 11%. The results well evidence that the introduced FBA/MSPE is a promising extraction technology for FQs, and the established FBA/MSPE-HPLC/DAD approach is suitable to measure low concentrations of FQs in water and milk samples.

Determination of fluoroquinolones in food samples by magnetic solid-phase extraction based on a magnetic molecular sieve nanocomposite prior to high-performance liquid chromatography and tandem mass spectrometry

In this study, a magnetic molecular sieve material (Fe₃O₄@MCM-48) was synthesized by a combination of solvothermal and self-assembly methods. The physicochemical properties of the magnetic molecular sieve material were characterized by scanning electron microscopy, energy-dispersive spectroscopy, magnetic hysteresis loop measurements, transmission electron microscopy, powder X-ray diffraction, N₂ adsorption-desorption analysis, and Fourier transform infrared spectroscopy. The as-synthesized nanocomposite showed various advantages, including easy magnetic-assisted separation, high specific surface area, and a highly interwoven and branched mesoporous structure. The Fe₃O₄@MCM-48 nanocomposite was then used as an effective adsorbent material for magnetic solid-phase extraction of fluoroquinolones (FQs) from water samples. The FQs in the extract were determined via liquid chromatography-tandem mass spectrometry. Adsorption and desorption factors that affected the extraction performance were systematically optimized using spiked purified water samples. Good linearity (with R² > 0.99) was shown by this FQ detection system for FQ concentrations from 5 to 1000 ng L^-1. Moreover, low detection limits (0.7-6.0 ng L^-1) and quantitation limits (2.5-20.0 ng L^-1) and satisfactory repeatability (relative standard deviation < 10%, n = 6) were achieved for water samples. The developed method was also validated for the analysis of FQs in meat and milk samples. Finally, FQs in food and drinking water samples were successfully determined using the developed method. Graphical abstract.

A magnetic cellulose-based carbon fiber hybrid as a dispersive solid-phase extraction material for the simultaneous detection of six bisphenol analogs from environmental samples

A hollow porous NiMn2O4 nanosphere-decorated cellulose-based carbon fiber (CCF, using recyclable cotton wool as the carbon fiber source) hybrid was fabricated via a relatively green and eco-friendly hydrothermal synthetic route, followed by calcination treatment. The in situ growth of hollow porous NiMn2O4 on the CCFs led to it being decorated over the CCF surface uniformly. The NiMn2O4/CCFs hybrid displayed excellent extraction capabilities and magnetic reusability. Benefiting from its high porosity, large specific surface area, and superior chemical affinities to bisphenol analogs (BPs), and the synergistic effect between NiMn2O4 and CCFs, NiMn2O4/CCFs as an adsorbent was applied to the extraction of low concentrations of BP compounds, displaying excellent extraction capabilities. A magnetic dispersive solid phase extraction (MDSPE) method combined with HPLC was developed for detecting six BPs in real environmental samples. Under optimal conditions, the detection limits and recoveries were 0.56-0.83 ng mL-1 and 84.3-103.5% (RSD ≤ 4.5%). It was confirmed that NiMn2O4/CCFs was a type of rapid and high efficiency MDSPE material for the analysis of multiple BP compounds in environmental samples.

Dandelion-like nickel/cobalt metal-organic framework based electrode materials for high performance supercapacitors

Metal-organic frameworks (MOFs), serving as a promising electrode material in the supercapacitors, have attracted tremendous interests in recent years. Here, through modifying the molar ratio of the Ni²⁺ and Co²⁺, we have successfully fabricated Ni-MOF and Ni/Co-MOF by a facile hydrothermal method. The Ni/Co-MOF with a dandelion-like hollow structure shows an excellent specific capacitance of 758 F g^-1 at 1 A g^-1 in the three-electrode system. Comparing with Ni-MOF, the obtained Ni/Co-MOF has a better rate capacitance (89% retention at 10 A g^-1) and cycling life (75% retention after 5000 circulations). Besides, the assembled asymmetric supercapacitor based on Ni/Co-MOF and active carbon exhibits a high specific energy density of 20.9 W h kg^-1 at the power density of 800 W kg^-1. All these results demonstrate that the mixed-metal strategy is an effective way to optimize the morphology and improve the electrochemical property of the MOFs.

Recent advances in metal-organic frameworks for adsorption of common aromatic pollutants

This review (with 85 refs.) summarizes the recent literature on the adsorption of common aromatic pollutants by using modified metal-organic frameworks (MOFs). Four kinds of aromatic pollutants are discussed, namely benzene homologues, polycyclic aromatic hydrocarbons (PAHs), organic dyes and their intermediates, and pharmaceuticals and personal care products (PPCPs). MOFs are shown to be excellent adsorbents that can be employed to both the elimination of pollutants and to their extraction and quantitation. Adsorption mechanisms and interactions between aromatic pollutants and MOFs are discussed. Finally, the actual challenges of existence and the perspective routes towards future improvements in the field are addressed. Graphical abstract Recent advance on adsorption of common aromatic pollutants including benzene series, polycyclic aromatic hydrocarbons, organic dyes and their intermediates, pharmaceuticals and personal care products by metal-organic frameworks.

3D hollow porous CdFe2O4 microspheres as viable materials for magnetic solid-phase extraction of azo colorants

3D magnetic hollow porous CdFe₂O₄ microspheres (3D MHPS-CdFe2O4) were prepared by a one-step and template-free hydrothermal method. The material was applied for magnetic solid phase extraction of three azo colorants (Acid Red, Congo Red, Sunset Yellow). Compared to conventional CdFe₂O₄ nanoparticles, the new 3D material exhibits superior extraction capability because of its unique hollow porous structure, high specific surface area, and the strong interaction between 3D microspheres and the colorants. A magnetic solid phase extraction (MPSE) combined with HPLC was established for simultaneous detection of the three azo colorants in food samples. Under optimum conditions, the detection limits are 0.54-1.00 ng mL^-1, and good recoveries of 87.0-100.7% were obtained with spiked samples, with relative standard deviation of ≤ 3.8%. The combination of using the new 3D material and MPSE-HPLC results in an efficient, sensitive and inexpensive method for simultaneous determination of such colorants. Graphical abstract Schematic of the preparation of 3D magnetic hollow porous CdFe₂O₄ microspheres as solid phase extractant for simultaneous trace detection of three azo colorants in real samples.

A regenerable sorbent composed of a zeolite imidazolate framework (ZIF-8), Fe3O4 and graphene oxide for enrichment of atorvastatin and simvastatin prior to their determination by HPLC

Graphene oxide (GO), nanosized Fe₃O₄ and zeolite imidazolate framework-8 (ZIF-8) were hybridized as a multifunctional sorbent for use in microextraction. The sorbent was characterized by SEM, TEM, XRD and FTIR. The composite is porous, has a high specific surface (> 600 m²·g^-1) and is paramagnetic. The GO sheets are shown to act as carriers for the Fe₃O₄ nanoparticles and ZIF-8. The composite is a viable material for the preconcentration of atorvastatin and simvastatin from urine prior to their determination by HPLC with PDA detection. The limits of detection are 116 and 387 pg·mL^-1, respectively. Recoveries from spiked urine samples range between 84.7 and 95.7%, with relative standard deviation of ≤4.5%. Enrichment factors range from 169 to 191. The method was successfully applied to the determination of atorvastatin in urine. Moreover, this sorbent is regenerable and recyclable for at least seven times without obvious decrease in performance. Graphical abstract A composite sorbent composed of a zeolite imidazolate framework, Fe₃O₄ and graphene oxide was applied to the extraction of statins in urine prior their determination by HPLC.