Liposome-coated mesoporous silica nanoparticles loaded with L-cysteine for photoelectrochemical immunoassay of aflatoxin B1

Nanotechnology-Driven Delivery of Caffeine Using Ultradeformable Liposomes-Coated Hollow Mesoporous Silica Nanoparticles for Enhanced Follicular Delivery and Treatment of Androgenetic Alopecia

Androgenetic alopecia (AGA) is caused by the impact of dihydrotestosterone (DHT) on hair follicles, leading to progressive hair loss in men and women. In this study, we developed caffeine-loaded hollow mesoporous silica nanoparticles coated with ultradeformable liposomes (ULp-Caf@HMSNs) to enhance caffeine delivery to hair follicles. Caffeine, known to inhibit DHT formation, faces challenges in skin penetration due to its hydrophilic nature. We investigated caffeine encapsulated in liposomes, hollow mesoporous silica nanoparticles (HMSNs), and ultradeformable liposome-coated HMSNs to optimize drug delivery and release. For ultradeformable liposomes (ULs), the amount of polysorbate 20 and polysorbate 80 was varied. TEM images confirmed the mesoporous shell and hollow core structure of HMSNs, with a shell thickness of 25-35 nm and a hollow space of 80-100 nm. SEM and TEM analysis showed particle sizes ranging from 140-160 nm. Thermal stability tests showed that HMSNs coated with ULs exhibited a Td10 value of 325 °C and 70% residue ash, indicating good thermal stability. Caffeine release experiments indicated that the highest release occurred in caffeine-loaded HMSNs without a liposome coating. In contrast, systems incorporating ULp-Caf@HMSNs exhibited slower release rates, attributable to the dual encapsulation mechanism. Confocal laser scanning microscopy revealed that ULs-coated particles penetrated deeper into the skin than non-liposome particles. MTT assays confirmed the non-cytotoxicity of all HMSN concentrations to human follicle dermal papilla cells (HFDPCs). ULp-Caf@HMSNs promoted better cell viability than pure caffeine or caffeine-loaded HMSNs, highlighting enhanced biocompatibility without increased toxicity. Additionally, ULp-Caf@HMSNs effectively reduced ROS levels in DHT-damaged HFDPCs, suggesting they are promising alternatives to minoxidil for promoting hair follicle growth and reducing hair loss without increasing oxidative stress. This system shows promise for treating AGA.

Triple-helix molecular-switch-actuated rolling circle amplification and catalytic hairpin assembly multistage signal amplified fluorescent aptasensor for detection of aflatoxin B1

BACKGROUND

Mycotoxins, a class of secondary metabolites produced by molds, are widely distributed in nature and are very common in food contamination. Aflatoxin B1 (AFB1) is a highly stable natural mycotoxin, and many agricultural products are easily contaminated by AFB1, it is important to establish a sensitive and efficient AFB1 detection method for food safety. The fluorescence aptamer sensor has shown satisfactory performance in AFB1 detection, but most of the fluorescence aptasensors are not sensitive enough, so improving the sensitivity of the aptasensor becomes the focus of this work.

RESULTS

Herein, an innovative fluorescent aptasensor for AFB1 detection which is based on catalytic hairpin assembly (CHA) and rolling circle amplification (RCA) driven by triple helix molecular switch (THMS) is proposed. A functional single-strand with an AFB1 aptamer, here called an APF, is first designed to lock onto the signal transduction probe (STP), which separates from THMS when target AFB1 is present. Subsequently, STP initiates the RCA reaction along the circular probe, syntheses macro-molecular mass products through repeated triggering sequences, triggers the CHA reaction to produce a large number of H1-H2 structures, which causes FAM to move away from BHQ-1 and recover its fluorescence signal. The fluorescence signal from FAM at 520 nm was collected as the signal output of aptasensor in this work. With high amplification efficiency of RCA and CHA of the fluorescence sensor, resulting in a low LOD value of 2.95 pg mL-1(S/N = 3).

SIGNIFICANCE

The successful establishment of the sensor designed in this work shows that the cascade amplification reaction is perfectly applied in the fluorescent aptamer sensor, and the signal amplification through the reaction between DNA strands is a simple and efficient method. In addition, it's also important to remember that the aptasensor can detect other targets only by changing the sequence of the aptamer, without redesigning other DNA sequences in the reaction system.

A highly sensitive fluorescence biosensor for aflatoxins B1 detection based on polydiacetylene liposomes combined with exonuclease III-assisted recycling amplification

A fluorescence biosensor for determination of aflatoxin B1 (AFB1) based on polydiacetylene (PDA) liposomes and exonuclease III (EXO III)-assisted recycling amplification was developed. The AFB1 aptamer partially hybridizes with complementary DNA (cDNA), which is released upon recognition of AFB1 by the aptamer. Subsequently, the cDNA hybridizes with hairpin H to form double-stranded DNA that undergoes digestion by EXO III, resulting in the cyclic release of cDNA and generation of capture DNA for further reaction. The capture DNA then hybridizes with probe modified on PDA liposomes, leading to aggregation of liposomes and subsequent fluorescence production. This strategy exhibited a limit of detection of 0.18 ng/mL within the linear range 1-100 ng/mL with a determination coefficient > 0.99. The recovery ranged from 92.81 to 106.45%, with relative standard deviations (RSD) between 1.73 and 4.26%, for corn, brown rice, peanut butter, and wheat samples. The stability, accuracy, and specificity of the method demonstrated the applicability for real sample analysis.

Strategies to control mycotoxins and toxigenic fungi contamination by nano-semiconductor in food and agro-food: a review

Mycotoxins are toxic secondary metabolites generated from toxigenic fungi in the contaminated food and agro-food, which have been regarded as a serious threat to the food safety and human health. Therefore, the control of mycotoxins and toxigenic fungi contamination is of great significance and has attracted the increasing attention of researchers. As we know, nano-semiconductors have many unique properties such as large surface area, structural stability, good biocompatibility, excellent photoelectrical properties, and low cost, which have been developed and applied in many research fields. Recently, nano-semiconductors have also been promisingly applied in mitigating or controlling mycotoxins and toxigenic fungi contaminations in food and agro-food. In this review, the type, occurrence, and toxicity of main mycotoxins in food and agro-food were introduced. Then, a variety of strategies to mitigate the mycotoxin contamination based on nano-semiconductors involving mycotoxins detection, inhibition of toxigenic fungi, and mycotoxins degradation were summarized. Finally, the outlook, opportunities, and challenges have prospected in the future for the mitigation of mycotoxins and toxigenic fungi based on nano-semiconductors.

Ultrasensitive Ratiometric Fluorescence Bioassay for Accurate Detection of Covid-19-Specific Nucleocapsid Protein in Clinical Serum Samples Using Modified Cleavable Mesoporous SiO2 Satellite-Enriched Carbon Dots

Due to the presence of various autofluorescent compounds in biological samples like serum and the photobleaching of organic fluorophores, fluorescence sensing has limited practical applicability. This study describes the development of an improved ratiometric fluorescence assay to determine the nucleocapsid protein (N protein), one of the most conserved biomarkers of Covid-19 in spiked and serum samples using highly stable buffer-based near IR-dual emission carbon dots (CDs) encapsulated into the cavities of cleavable silica nanocapsule (SNCs) nanocomposite. The cavities of cleavable silica nanocapsules (SNCs) and the formed core-shell CDs@ SNCs were used as a superior reservoir of fluorescent markers produced by cohydrolyzing tetraethyl orthosilicate and diiminosilane linker, which held hundreds of CDs in silica shell frameworks. The SiO2 nanocomposite was modified with an N protein antibody that specifically paired to the receptor binding region of the Cov-19 spike protein subunit. CDs were taken out of SNCs by NaBH4 reduction, and the released CDs exhibited dual emission at 475 and 675 nm when excited at 400 nm. Ratiometric detection is completed over a binding-induced, concentration-dependent immuno-affinity of the N protein that drives the fluorescence quenching phenomenon between the CDs as fluorophore and the AuNPs as quencher. As the N protein concentration increased, the intensity of the red emission (675 nm) dropped, whereas the intensity of the green emission (475 nm) already remained constant, which is due to sandwich immunoassays of CDs around AuNPs. Using the exceptional fluorescent characteristics of CDs and the high selectivity of nanocomposite functionalized with N-protein antibody, the developed assay efficiently eliminates the autofluorescence background interference of serum samples. The fluorescence ratio (I475/I675) provides a limit of detection of 2 pg mL-1 over a linear range of 0.01 to 5 ng mL-1 and exhibits an amplified sensitivity of 54 times compared to conventional immunoassay using CDs as fluorescent labels. With one-step signal amplification and requiring small sample quantities (only 20 μL), this sensing platform can be effectively used for the accurate detection of N protein, and no cross-reactivity is detected in the presence of different interfering agents.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

Nanoliposome based biosensors for probing mycotoxins and their applications for food: A review

Mycotoxins are the most common feed and food contaminants affecting animals and humans, respectively; continuous exposure causes tremendous health problems such as kidney disorders, infertility, immune suppression, liver inflammation, and cancer. Consequently, their control and quantification in food materials is crucial. Biosensors are potential tools for the rapid detection and quantification of mycotoxins with high sensitivity and selectivity. Nanoliposomes (NLs) are vesicular carriers formed by self-assembling phospholipids that surround the aqueous cores. Utilizing their biocompatibility, biodegradability, and high carrying capacity, researchers have employed NLs in biosensors for monitoring various targets in biological and food samples. The NLs are used for surface modification, signal marker delivery, and detection of toxins, bacteria, pesticides, and diseases. Here, we review marker-entrapped NLs used in the development of NL-based biosensors for mycotoxins. These biosensors are sensitive, selective, portable, and cost-effective analytical tools, and the resulting signal can be produced and/or amplified with or without destroying the NLs. In addition, this review emphasizes the benefits of the immunoliposome method in comparison with traditional detection approaches. We expect this review to serve as a valuable reference for researchers in this rapidly growing field. The insights provided may facilitate the rational design of next-generation NL-based biosensors.

Surface Plasmon Resonance (SPR) biosensor for detection of mycotoxins: A review

Mycotoxin is one of the most important natural pollutants, which poses a global threat to food safety. However, the pollution of mold in food production is inevitable. The detection technology of mycotoxins in food production is an important means to prevent the damage of mycotoxins, so rapid detection and screening to avoid pollution diffusion is essential. The focus of this review is to update the literature on the detection of mycotoxins by surface plasmon resonance (SPR) technology, rather than just traditional chromatographic methods. As a relatively novel and simple analytical method, SPR has been proved to be fast, sensitive and label-free, and has been widely used in real-time qualitative and quantitative analysis of various pollutants. This paper aims to give a broad overview of the sensors for detection and analysis of several common mycotoxins.

Advances in Chicken IgY-Based Immunoassays for the Detection of Chemical and Biological Hazards in Food Samples

As antibodies are the main biological binder for hazards in food samples, their performance directly determines the sensitivity, specificity, and reproducibility of the developed immunoassay. The overwhelmingly used mammalian-derived antibodies usually suffer from complicated preparation, high cost, frequent bleeding of animals, and sometimes low titer and affinity. Chicken yolk antibody (IgY) has recently attracted considerable attention in the bioanalytical field owing to its advantages in productivity, animal welfare, comparable affinity, and high specificity. However, a broad understanding of the application of IgY-based immunoassay for the detection of chemical and biological hazards in food samples remains limited. Here, we briefly summarized the diversity, structure, and production of IgY including polyclonal and monoclonal formats. Then, a comprehensive overview of the principles, designs, and applications of IgY-based immunoassays for these hazards was reviewed and discussed, including food-borne pathogens, food allergens, veterinary drugs, pesticides, toxins, endocrine disrupting chemicals, etc. Thus, the trend of IgY-based immunoassays is expected, and more IgY types, higher sensitivity, and diversification of recognition-to-signal manners are necessary in the future.

Controllable signal molecule release from Au NP-gated MSNs for photocathodic detection of ultralow level AβO

By integrating a target-responsive MSN-based controlled release system with a sensitization-SPR co-enhanced thionine/MoS₂ QDs/Cu NWs photocathode, a highly sensitive split-type PEC aptasensing platform for AβO detection in blood is constructed. Ultralow detection limit (2.1 fM) and high selectivity show great potential in early AD diagnosis.

The toxicity analysis of PVP, PVA and PEG surface functionalized ZnO nanoparticles on embryonic as well as adult Danio rerio

Globally, the production of zinc oxide nanoparticles (ZnO NPs) increased due to its wide applications including cosmetics, paints etc., and gets accumulated in the environment during their production, use or end-of-life. The toxic effects of the NPs vary with the presence of various surface modification agents. In the current report, toxic effect of bare and capped ZnO NPs with polymeric surface modifying agent including polyvinyl alcohol (PVA), polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) is studied against adult as well as embryonic zebra fish. The surface capped NPs showed great variation in toxicity levels. It was observed that ZnO-PVA showed highly reduced toxic effects relative to ZnO-PEG and ZnO-PVP. Further, various environmental agents including humic acid can also have an impact on NPs toxicity. ZnO particles showed increased toxic effect in humic acid presence. The uptake of ZnO particles by D. rerio was high in the order of PVP-, PEG- and PVA- followed by bare-ZnO. The current investigation found that ZnO NPs dissolution and uptake are the major factors which cause the toxicity against adult as well as embryonic zebra fishes respectively.

Silica nanoparticle-modified microcomb electrode for voltammetry detection of osteopontin with high sensitivity

Osteosarcoma is a commonly occurring bone malignancy, and it is the second most common cause of cancer deaths in adolescents and children. A sensitive silica nanoparticle (Si-NP) modified current-volt sensor was introduced to identify the osteopontin antigen, a well-known biomarker for osteosarcoma. Si-NP was extracted from the rice husk ash and utilized for the surface functionalization on the interdigitated microelectrode sensing surface. Extracted Si-NP has a spherical shape with uniform distribution, and it is confirmed by field emission scanning electron microscopy and field-emission transmission electron microscopy. Si-NP was layered on the electrode surface through a (3-aminopropyl)triethoxysilane amine linker, and the antibody was immobilized on Si-NP through a glutaraldehyde linker. Osteopontin was effectively detected on the antibody-attached surface, and the determination limit was 0.6 ng/mL. The regression was determined as y = 0.9366x - 1.1113 and the R2 value was 0.9331 and the detection limit of osteopontin was 0.6 ng/mL in the range between 0.3 and 5 ng/mL. In addition, control performance with nonimmune antibodies and albumin did not change the current volt, showing the specific osteopontin identification. This research work brings out the easy and cost-effective method to diagnose osteosarcoma and its etiology.

Electrochemical impedance biosensor for detection of saxitoxin in aqueous solution

Saxitoxin is a cyanotoxin which is very harmful to human health; the concentration limit in drinking water is only 3 μg/L. Therefore, a simple, fast, sensitive, low-cost, and specific method for its detection, quantification, and monitoring in water bodies is needed to avoid adverse effects on animal and human health. In this work, we developed an electrochemical impedimetric biosensor using a specific aptamer as recognition element for saxitoxin detection. This method allies the superior sensing characteristics of aptamers with the nondestructive, label-free, and easy working principles of the electrochemical impedance technique. The device presented sensitivity for detecting saxitoxin concentrations above 0.3 μg/L, with high selectivity in negative control experiments, demonstrating a promising alternative for water toxin detection.

Development of Polydiacetylene-Based Testosterone Detection as a Model Sensing Platform for Water-Insoluble Hormone Analytes

We have developed a polydiacetylene (PDA)-based sensing platform to detect testosterone (T) as a potential biomarker of preterm birth. The insolubility of the steroid hormone in water, where PDA assemblies are dispersed, poses a major issue, since they can hardly interact with each other. To overcome this challenge, acetonitrile was used as a suitable solvent. In addition, to minimize false signals of PDA assemblies caused by the solvent, a mixture of acetonitrile and distilled water was selected. To prove a concept of PDA-based sensing platform for targeting T hormone, we conjugated anti-T antibodies to surface of PDA assemblies to induce selective binding between T and anti-T antibodies. The fluorescence sensory signaling of the PDA-anti-T antibody conjugate was selectively generated for T, over 3.4 times higher sensitivity of the signaling compared to that from other sex steroid hormones studied (β-estradiol and progesterone).

Acetylcholine Detection Based on pH-Sensitive Liposomes

The pH-sensitive liposomes were employed to amplify the detection of acetylcholine (ACh). Acetylcholinesterase (AChE) covalently immobilized on the magnetic particles and the pH-sensitive liposomes encapsulating ferricyanide were added to a cyclic voltammetry cell solution where ACh was distributed. The conversion of ACh into acetic acid seemed to induce the pH decrease that caused the reduction in the electrostatic repulsion between the head groups of weakly acidic 1,2-dipalmitoyl-sn-glycero-3-succinate. The reduction generated liposome destabilization, which released potassium ferricyanide encapsulated inside the liposomes. The effects of the ACh concentration and pH were investigated. An addition of 10 μL of more than 0.5 mg/mL ACh concentration into 5 mL of a cyclic voltammetry cell solution was necessary to observe the response. The activity of AChE was reversible with respect to the pH change between 7 and 5. The sensitivity of this detection was almost identical to comparable techniques such as enzyme-linked immunosorbent assay, field-effect transistor, fluorescence, UV spectrometry, magnetic resonance imaging, and surface plasmon resonance. Therefore, the methodology developed in this study is feasible as a portable, rapid, and sensitive method.

Recent progress of personal glucose meters integrated methods in food safety hazards detection

Development of personal glucose meters (PGMs) for blood glucose monitoring and management by the diabetic patients has been a long history since its first invention in 1968 and commercial application in 1975. The main reasons for its wide acceptance and popularity can be attributed mainly to the easy operation, test-to-result model, low cost, and small volume of sample required for blood glucose concentration test. During past decades, advances in analytical techniques have repurposed the use of PGMs into a general point-of-care testing platform for a variety of non-glucose targets, especially the food hazards. In this review, we summarized the recent published research using PGMs to detect the food safety hazards of mycotoxins, illegal additives, pathogen bacteria, and pesticide and veterinary drug residues detection with PGMs. The progress on PGM-based detection achieved in food safety have been carefully compared and analyzed. Furthermore, the current bottlenecks and challenges for practical applications of PGM for hazards detection in food safety have also been proposed.

Biomedical application of mesoporous silica nanoparticles as delivery systems: a biological safety perspective

The application of mesoporous silica nanoparticles (MSNs) as drug delivery systems to deliver drugs, proteins, and genes has expanded considerably in recent years, using in vitro and animal studies. For future translation to clinical applications, the biological safety aspects of MSNs must be considered carefully. This paper reviews the biosafety of MSNs, examining key issues such as biocompatibility, effects on immune cells and erythrocytes, biodistribution, biodegradation and clearance, and how these vary depending on the effects of the physical and chemical properties of MSNs such as particle size, porosity, morphology, surface charge, and chemical modifications. The future use of MSNs as a delivery system must extend beyond what has been learnt thus far using rodent animal models to encompass larger animals.

Aptamer-based detection of fumonisin B1: A critical review

Mycotoxin contamination is a current issue affecting several crops and processed products worldwide. Among the diverse mycotoxin group, fumonisin B1 (FB1) has become a relevant compound because of its adverse effects in the food chain. Conventional analytical methods previously proposed to quantify FB1 comprise LC-MS, HPLC-FLD and ELISA, while novel approaches integrate different sensing platforms and fluorescently labelled agents in combination with antibodies. Nevertheless, such methods could be expensive, time-consuming and require experience. Aptamers (ssDNA) are promising alternatives to overcome some of the drawbacks of conventional analytical methods, their high affinity through specific aptamer-target binding has been exploited in various designs attaining favorable limits of detection (LOD). So far, two aptamers specific to FB1 have been reported, and their modified and shortened sequences have been explored for a successful target quantification. In this critical review spanning the last eight years, we have conducted a systematic comparison based on principal component analysis of the aptamer-based techniques for FB1, compared with chromatographic, immunological and other analytical methods. We have also conducted an in-silico prediction of the folded structure of both aptamers under their reported conditions. The potential of aptasensors for the future development of highly sensitive FB1 testing methods is emphasized.

Patulin and Trichothecene: characteristics, occurrence, toxic effects and detection capabilities via clinical, analytical and nanostructured electrochemical sensing/biosensing assays in foodstuffs

Patulin and Trichothecene as the main groups of mycotoxins in significant quantities can cause health risks from allergic reactions to death on both humans and animals. Accordingly, rapid and highly sensitive determination of these toxics agents is of great importance. This review starts with a comprehensive outlook regarding the characteristics, occurrence and toxic effects of Patulin and Trichothecene. In the following, numerous clinical and analytical approaches have been extensively discussed. The main emphasis of this review is placed on the utilization of novel nanomaterial based electrochemical sensing/biosensing tools for highly sensitive determination of Patulin and Trichothecene. Furthermore, a detailed and comprehensive comparison has been performed between clinical, analytical and sensing methods. Subsequently, the nanomaterial based electrochemical sensing platforms have been approved as reliable tools for on-site analysis of Patulin and Trichothecene in food processing and manufacturing industries. Different nanomaterials in improving the performance of detecting assays were investigated and have various benefits toward clinical and analytical methods. This paper would address the limitations in the current developments as well as the future challenges involved in the successful construction of sensing approaches with the functionalized nanomaterials and also allow exploring into core-research works regarding this area.

Self-assembled chromogen-loaded polymeric cocoon for respiratory virus detection

Inspired by the self-assembly approach, in this work, the chromogen, 3,3',5,5'-tetramethylbenzidine (TMB), was successfully co-precipitated in aqueous solution to form collective nanoparticles (NPs) of signal molecules (TMB-NPs). Utilizing poly(lactide-co-glycolide) (PLGA) in the molecular delivery approach, the formed emulsion nanovesicle (TMB-NPs@PLGA) exhibits an enrichment of the collective signal molecules in a single antibody-antigen conjugation. A specific antibody-conjugated TMB-NPs@PLGA forms an immunocomplex sandwich structure upon the addition of influenza virus (IV)/A. The addition of dimethyl sulfoxide (DMSO) dissolves the PLGA nanovesicles, releasing the encapsulated TMB-NPs. Sequentially, the TMB-NPs release TMB molecules upon the addition of DMSO. The released TMB is catalytically oxidized by H₂O₂ with self-assembled protein-inorganic nanoflowers, where copper nanoflowers (CuNFs) acted as the nanozyme. The developed immunoassay demonstrates high sensitivity for IV/A with a limit of detection (LOD) as low as 32.37 fg mL^-1 and 54.97 fg mL^-1 in buffer and serum, respectively. For practical needs, a clinically isolated IV/A/H3N2 and spike protein of SARS-CoV-2 were detected with the LODs of 17 pfu mL^-1 and 143 fg mL^-1, respectively. These results show the applicability of the advanced TMB-NPs@PLGA-based colorimetric sensor for the highly sensitive detection of airborne respiratory viruses.

Distance-dependent visual fluorescence immunoassay on CdTe quantum dot-impregnated paper through silver ion-exchange reaction

A paper-based visual fluorescence immunoassay is presented for the detection of matrix metalloproteinase-7 (MMP7) that is related to renal cancer. The method is based on the distance-dependent fluorescence quenching of CdTe quantum dots (QDs) on a nitrocellulose membrane by Ag⁺ following a sandwich-type immunoreaction on microtiter wells using silver nanoparticle (AgNP)-labeled secondary antibody- and primary antibody-coated microtiter wells. The silver nanoparticles captured in the well are dissolved with HNO₃, while the quenching effect of QDs is based on silver ion-exchange reaction under 365-nm excitation light irradiation. Increasing concentration of released Ag⁺, thus higher concentration of the protein, leads to an increased distance of quenching on the nitrocellulose membrane. The paper-based immunoassay by combination of AgNP-assisted ion-exchange reaction with QD gives good distance-dependent responses and allows the detection of MMP7 at a concentration as low as 7.3 pg mL^-1. The coefficients of variation are less than 6.9% and 12.4% for intra-assay and inter-assay, respectively. High specificity and long-term stability are achieved during the assay. Importantly, the testing of human serum samples using our strategy shows well-matched results with commercial human MMP7 ELISA kits. Graphical abstract A distance-dependent visual immunoassay is developed for the determination of serum matrix metalloproteinase-7 on CdTe quantum dot-impregnated paper with silver ion-exchange reaction.

Nanobody-based electrochemical competitive immunosensor for the detection of AFB1 through AFB1-HCR as signal amplifier

A novel nanobody (Nb)-based voltammetric immunosensor coupled with horseradish peroxidase concatemer-modified hybridization chain reaction (HRP-HCR) signal amplifying system is described to realize the rapid and ultrasensitive detection of AFB1. To design such an immunoassay, anti-AFB1 Nbs with smaller molecular size were coated densely onto the surface of Au nanoparticle-tungsten disulfide-multi-walled carbon nanotubes (AuNPs/WS2/MWCNTs) functional nanocomposites as an effective molecular recognition element, whereas AFB1-streptavidin (AFB1-SA) conjugates were ingeniously bound with biotinylated HCR dsDNA nanostructures as the competitor, amplifier, and signal report element. In the presence of AFB1 targets, a competitive immunoreaction was performed between the analyte and AFB1-SA-labeled HCR (AFB1-HCR) platform. Upon the addition of SA-modified polyHRP (SA-polyHRP), AFB1-HCR nanostructures containing abundant biotins were allowed to cross-link to a quantity of HRP by streptavidin-biotin chemistry for signal amplification and signal conversion. Under optimal conditions, the immunosensor displayed a good linear correlation toward AFB1 ranging from 0.5 to 10 ng mL-1 with a sensitivity of 2.7 μA • (mL ng-1) and an ultralow limit of detection (LOD) of 68 fg mL-1. The specificity test showed that the AFB1 immunosensor had no obvious cross-reaction with OTA, DON, ZEN, and FB1. The signal of this sensor decreased by 10.18% in 4 weeks indicating satisfactory stability, and its intra- and inter-laboratory reproducibility was 3.42~10.35% and 4.03%~12.11%, respectively. This biosensing system will open up new opportunities for the detection of AFB1 in food safety and environmental analysis and extend a wide range of applications in the analysis of other small molecules. Graphical abstract.

Functional nanomaterials based immunological detection of aflatoxin B1: a review

Aflatoxin B1 (AFB1) is highly carcinogenic, mutagenic and teratogenic. Accordingly, sensitive, rapid and cost-effective techniques for detection of AFB1 is in urgent demand for food safety and the health of consumers. In this review, we report the current state of immunoassay formats and development, mainly based on nanomaterials for determination of AFB1. Following an introduction of the field, the microplate-, membrane- and microelectrode-based immunoassays are described. The relevant mechanisms, sensitivities, superiorities and deficiencies of each format are discussed. Finally, perspectives on the future development of nanomaterials-based immunoassays for AFB1 are provided.

In situ amplified photothermal immunoassay for neuron-specific enolase with enhanced sensitivity using Prussian blue nanoparticle-loaded liposomes

Methods based on prussian blue nanoparticles (PBNPs) have been reported for photothermal immunoassays in analytical nanoscience fields but most suffer from low sensitivity and are not beneficial for routine use.

Sensitive photoelectrochemical immunoassay of Staphylococcus aureus based on one-pot electrodeposited ZnS/CdS heterojunction nanoparticles

We report here a facile synthesis of ZnS/CdS heterojunction nanoparticles on an indium-tin oxide (ITO) electrode and their application in the ultrasensitive photoelectrochemical detection of Staphylococcus aureus (S. aureus). The ZnS/CdS/ITO electrode was prepared using one-pot electrodeposition in an acidic solution containing ZnCl2, CdCl2 and Na2S2O3. The optimal ZnS/CdS heterojunction nanoparticles with a Zn/Cd atomic ratio of 1 : 1 showed a high photoelectrochemical response to l-cysteine. l-Cysteine-encapsulated liposome (cysteine@liposome) immunonanocapsules were prepared and used as the labels for photoelectrochemical detection of S. aureus. By coupling cysteine@liposome immunonanocapsule labeling with immunomagnetic separation/enrichment and photoelectrochemical analysis using the ZnS/CdS/ITO electrode, sensitive photoelectrochemical detection of S. aureus was achieved. Under optimal conditions, the linear range for photoelectrochemical detection of S. aureus was from 1 to 4000 CFU mL-1. The proposed method was successfully used for photoelectrochemical detection of S. aureus in milk and juice samples.

Nanoporous silica coupled MALDI-TOF MS detection of Bence-Jones proteins in human urine for diagnosis of multiple myeloma

Bence-Jones protein is a biomarker in urine for multiple myeloma. Traditional methods for urine Bence-Jones protein detection are either less-sensitive or laborious. Herein, we describe a new method for the detection of urine Bence-Jones protein using nanoporous materials and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Macroporous ordered silica foams (MOSF) were used to enrich proteins in urine, and then the materials-proteins composites were analyzed by MALDI-TOF MS. Based on the presence of specific mass spectrometric signals, Bence-Jones protein can be detected for the diagnosis of multiple myeloma. Twenty-one clinical positive and twenty-seven clinical negative urine samples were analyzed by the method. High sensitivity (95.24%, 20/21) and specificity (100%, 27/27) for the diagnosis of multiple myeloma were achieved. Compared to other methods for multiple myeloma diagnosis, e.g. immunofixation electrophoresis and immunonephelometry, our approach is more rapid, economical and convenient, which can be a new choice for the clinical diagnosis of Bence-Jones protein related diseases.

A photoelectrochemical sandwich immunoassay for protein S100β, a biomarker for Alzheimer's disease, using an ITO electrode modified with a reduced graphene oxide-gold conjugate and CdS-labeled secondary antibody

A sandwich-type photoelectrochemical immunoassay is described for the protein S100ß which is an Alzheimer's disease biomarker found in the astrocytes of the brain. Antibody against S100ß (anti-S100ß) was labeled with CdS quantum dots and then acted as a secondary antibody. The labeled antibody was characterized by FTIR, ultraviolet-visible and fluorescence spectroscopy. An indium-tin oxide (ITO) electrode was modified with a nanocomposite prepared from reduced graphene oxide and gold nanoparticles. Then, a sol-gel film containing isocyanate functional groups (-N=C=O) was cast on the surface of the electrode. The NCO group reacts with amino groups of the labeled antibody to covalently bind them to the surface. The S100β was bound by the primary immobilized antibody on the rGO-Au/ITO electrode and then sandwiched with the labeled secondary antibody. Cyclic voltammetry and electrochemical impedance spectroscopy were applied to confirm the stepwise changes in the electrochemical properties of the electrode surface. The photoelectrochemical immunoassay, typically operated at a potential of +0.2 V (vs. Ag|AgCl_sat) gives a signal that is related to the logarithm of the S100β concentration in the range from 0.25 to 10 ng·mL^-1 with a lower detection limit of 0.15 pg·mL^-1. The method was successfully applied to the determination of S100β in human serum samples. Graphical abstract Schematic presentation of an immunosensor which is based on an indium tin oxide modified with reduced graphene oxide decorated with gold nanocomposite and antibody. The immunosensor was applied for the determination of S100β biomarker by using in the labeled antibody.

Enzyme-free amplified and ultrafast detection of aflatoxin B1 using dual-terminal proximity aptamer probes

Aptamer probes provide an opportunity for achieving rapid and on-site detection of food contaminants. Herein, we proposed a general design strategy for aptamer probes enabling enzyme-free amplified, ultrafast and one-test tube homogeneous detection of aflatoxin B₁ (AFB₁). The key feature of the aptamer probe is designed with dual-terminal proximity structures, allowing the binding of one molecule to light up two fluorophores, leading to enzyme-free amplification and a remarkable improvement of signal to background ratio and sensitivity for AFB₁ detection. This aptamer probe could accommodate quick response to AFB₁, and the detection process could be finished within 1 min, ranking one of the quickest assays for AFB₁. AFB₁ detection of broad bean paste and peanut oil conferred satisfactory recoveries ranging from 90.3% to 114.8%. Contributed to the generality and simplicity of the design strategy, this structure-switching probe could potentially act as a general platform of on-site detection for food safety.

Glucose oxidase-loaded liposomes forin situamplified signal of electrochemical immunoassay on a handheld pH meter

Methods based on a pH meter have been developed for immunoassays, but most involve low sensitivity and weakly detectable signals, and thus are unsuitable for routine use.

Metal-Polydopamine Framework: An Innovative Signal-Generation Tag for Colorimetric Immunoassay

In this work, an innovative enzyme-free colorimetric immunoassay was proposed for the sensitive detection of alpha-fetoprotein (AFP) by introducing thymolphthalein-modified metal-polydopamine framework (MPDA@TP) for the signal generation and amplification. Using zeolitic imidazolate framework (ZIF-67) as the template, the hollow-structured metal-polydopamine framework (MPDA) with high surface recovery and abundant groups was synthesized and functionalized with thymolphthalein (TP) molecules via typical π-stacking reaction. In the presence of target AFP, an MPDA@TP-linked immunosorbent assay (MLISA) was implemented on the capture antibody-modified microplate by using detection antibody-labeled MPDA@TP as the secondary antibody. Upon alkaline solution introduction, the coated hydrophobic TP on the MPDA was deprotonated into hydrophilic TP2- ion and dissolved in the solution, thereby resulting in the color change of the solution from nearly colorless to deep blue, and the increasing absorbance of the solution at 595 nm. Importantly, the MPDA@TP-based immunoassay could exhibit high sensitivity for the quantitative detection of target AFP on the basis of the absorbance within a linear range of 10-1000 pg mL-1 at a low detection limit of 2.3 pg mL-1. Furthermore, this system was validated preliminarily to screen human serum specimens with well-matched results for the referenced AFP ELISA kit. Taking advantage of simplicity, enzyme-free, convenience, and sensitivity, MPDA@TP-linked immunosorbent assay has the potential for the application in scientific research and clinical diagnosis.

A novel sandwich-type photoelectrochemical sensor for SCCA detection based on Ag2S-sensitized BiOI matrix and AucorePdshell nanoflower label for signal amplification

Signal amplification was fulfilled for the interaction between BiOI/Ag₂S and Au_cPd_s.