Fluorometric determination of okadaic acid using a truncated aptamer

A two-pronged G-quadruplex construction strategy enables the development of a two-in-one aptasensor for β-lactoglobulin

Food allergies are a global concern since they threaten human health and are challenging to treat. Avoiding allergen exposure is an effective measure for vulnerable individuals, requiring reliable and simple allergen detection techniques. This can be achieved by integrating aptamer and G-quadruplex (G4) components into a sequence as a smart nucleic acid sensing nanodevice. The challenge lies in the functional structure formation of these components due to the lengthy integrated sequence and its conformational complexities. This study proposes a two-pronged strategy, encompassing both the nucleic acid sequence level and spatial structure levels, to construct a functional parallel G4 for an aptamer-loop-G4 integrated sequence, thereby enabling colorimetric detection of β-lactoglobulin (β-LG). Specifically, through comprehensive tailoring, interfering structures are excluded, and the integrated sequence is modified to adopt an appropriate G4 conformation to enhance signaling efficiency. Additionally, the topologically guided combined use of Mg2+ and K+ ions coordinates the conformational folding of the aptamer and G4 components, ensuring the recognition capacity of the aptamer. Finally, a β-LG aptasensor is established that presents advantages, such as cost-efficiency, simple operation, 35-min rapid detection, excellent specificity, and sensitivity for a linear range of nearly four orders of magnitude, meeting point-of-care testing (POCT) requirements.

Label-free fluorescence displacement sensors based on split aptamers and Thioflavin T for the rapid and sensitive detection of kanamycin in milk

Kanamycin (KANA) plays a key role in the treatment of bacterial infections and has been widely used in animal husbandry. However, its overuse causes antibiotic residues in animal-derived foods. Determination methods for KANA are urgently needed for food safety. Most of the developed fluorescent aptamer sensors for detecting KANA use parental aptamer (kana-Apt) as recognition unit. However, excessive bases tend to form secondary structures and lead to high background or nonspecific signals. In this study, two fluorescent sensors based on one (kana1-Apt) and two (kana1/kana2-Apt) split fragments were developed for KANA detection. The LODs of the kana1-Apt/ThT system and kana1/kana2-Apt/ThT systems were 4.88 nM and 4.53 nM, respectively. In addition, satisfactory recoveries of the kana1-Apt/ThT system and kana1/kana2-Apt/ThT system were obtained in the detection of KANA in milk, which were 97.6%-104.5% and 98.4%-105.9%, respectively. Moreover, the results indicated that the kana1-Apt fragment plays a critical role in recognition. In conclusion, the results of the present study provide a novel strategy for molecular detection based on split aptamers.

Graphene oxide-based fluorescent biosensors for pathogenic bacteria detection: A review

BACKGROUND

Pathogenic bacteria are widespread in nature and can cause infections and various complications, thereby posing a severe risk to public health. Therefore, simple, rapid, sensitive, and cost-effective methods must be developed to detect pathogenic bacteria. Biosensors are prominent platforms for detecting pathogenic bacteria owing to their high sensitivity, specificity, repeatability, and stability. With the development of nanotechnology, graphene oxide (GO) has been increasingly introduced into the construction of fluorescent biosensors to enhance their performance owing to its unique physicochemical properties.

RESULTS

This review systematically summarizes the development of GO-based fluorescent biosensors for the detection of pathogenic bacteria. First, we introduce the functionalization and modification of GO. The design and signal amplification strategies for GO-based fluorescent biosensors are also discussed. Finally, we explore the challenges and new perspectives associated with this field, with the aim of facilitating the development of GO-based fluorescent sensing technologies to prevent the spread of multidrug-resistant bacteria.

SIGNIFICANCE

This review will aid in the development of high-performance biosensors for pathogenic bacterial assays.

Generating robust aptamers for food analysis by sequence-based configuration optimization

Advanced analytical techniques are emerging in the food industry. Aptamer-based biosensors achieve rapid and highly selective analysis, thus drawing particular attention. Aptamers are oligonucleotide probes screened via in vitro Systematic Evolution of Ligands by EXponential Enrichment (SELEX), which can bind with their specific targets by folding into three-dimensional configurations and accept various modifications to be incorporated into biosensors, showing great potential in food analysis. Unfortunately, aptamers obtained by SELEX may not possess satisfactory affinity. Post-SELEX strategies were proposed to optimize aptamers' configuration and enhance the binding affinity, with specificity confirmed. Sequence-based optimization strategies exhibit great advantages in simple operation, good generalization, low cost, etc. This review summarizes the latest study (2015-2023) on generating robust aptamers for food targets by sequence-based configuration optimization, as well as the generated aptamers and aptasensors, with an expectation to provide inspirations for developing aptamer and aptasensors with high performance for food analysis and to safeguard food quality and safety.

Precautions for seafood consumers: An updated review of toxicity, bioaccumulation, and rapid detection methods of marine biotoxins

Seafood products are globally consumed, and there is an increasing demand for the quality and safety of these products among consumers. Some seafoods are easily contaminated by marine biotoxins in natural environments or cultured farming processes. When humans ingest different toxins accumulated in seafood, they may exhibit different poisoning symptoms. According to the investigations, marine toxins produced by harmful algal blooms and various other marine organisms mainly accumulate in the body organs such as liver and digestive tract of seafood animals. Several regions around the world have reported incidents of seafood poisoning by biotoxins, posing a threat to human health. Thus, most countries have legislated to specify the permissible levels of these biotoxins in seafood. Therefore, it is necessary for seafood producers and suppliers to conduct necessary testing of toxins in seafood before and after harvesting to prohibit excessive toxins containing seafood from entering the market, which therefore can reduce the occurrence of seafood poisoning incidents. In recent years, some technologies which can quickly, conveniently, and sensitively detect biological toxins in seafood, have been developed and validated, these technologies have the potential to help seafood producers, suppliers and regulatory authorities. This article reviews the seafood toxins sources and types, mechanism of action and bioaccumulation of marine toxins, as well as legislation and rapid detection technologies for biotoxins in seafood for official and fishermen supervision.

A 2D carbon nitride-based electrochemical aptasensor with reverse amplification for highly sensitive detection of okadaic acid in shellfish

Okadaic acid (OA) is one of the main virulence factors of diarrheal shellfish toxins (DSP). It is of great significance to detect OA with an accurate, specific and cost-effective technique in the fields of seafood safety and water quality control. In this work, an electrochemical aptasensor with reverse amplification was developed for the sensitive detection of OA. A two-dimensional graphite-phase nanomaterial (carbon nitride) modified with an anti-OA aptamer and thionine (Th) was immobilized onto the surface of the electrochemical electrode as the sensitive element to capture target OA molecules. ssDNA-modified carbon nitride was used as the reverse amplification element by hybridizing with non-OA linked aptamers. The preparation of the electrochemical aptasensor was well characterized by Scanning Electron Microscopy (SEM), zeta potential detection, UV-Vis absorption, Brunner-Emmet-Teller (BET) measurements, and electrochemical measurements. The quantitative assessment of OA was achieved by differential pulse voltammetry (DPV). Experimental results indicated that this aptasensor showed a concentration-dependent response to OA with a good detection performance including in terms of selectivity, repeatability, reproducibility, and stability. It exhibited 100-fold selectivity between OA and other toxins including dinophysistoxins (DTX), pectenotoxins (PTX), and yessotoxins (YTX). In addition, it showed a much wider quantification range, which is 10-13 M-10-10 M (0.080-80.50 pg mL-1). The detection limit was as low as 10-13 M (0.080 pg mL-1). The aptasensor also successfully achieved significant practicality on real shellfish samples contaminated by OA. All these results demonstrated that the reverse amplification strategy for marine toxin detection may provide a label-free and rapid detection approach for portable applications in the fields of environmental monitoring and food security.

Oriented-aptamer encoded magnetic nanosensor with laser-induced fluorescence for ultrasensitive test of okadaic acid

Okadaic acid (OA) biotoxin acts a well-established inhibitor of protein phosphatase even a tumor promoter of human being, arouse great attention in safety monitoring. However, the powerful and convenient nanosensing technologies for addressing the demands such as rapidity, high sensitivity, and stability in the in-field test of OA shellfish toxin is still scarce. Herein, a high-performance magnetic biometric nanosensor (MBNS) integrating oriented aptamers and ultrasensitive laser-induced fluorescence (LIF) was firstly proposed for the in-field detection of trace OA in seafoods. High-density aptamers hybridized with FAM-labeled cDNA were tethered to the surface of AuNPs on magnetic MIL-101@Fe3O4, and then finely regulated by mercaptohexyl alcohol (MCH) to be orderly assembled, as was successfully utilized to engineer an active biological nanosensor for highly specific recognition of OA. Aptamers anchored on magnetic Fe3O4@MOF@AuNPs activate a biometric microreactor of OA, in which the superior LIF properties, conformation regulation of aptamer, and the specific recognition using aptamer genes were adopted. The magnetic nanosensor with an excellent specificity and super sensitivity for OA analysis was achieved within 20 min. Moreover, the content of captured OA could facilely be recorded by measuring the fluorescence intensity, and the limit of detection (LOD) and limit of quantitation of OA (LOQ) reached 0.015 and 0.050 ng/mL respectively, which was far better than most aptamer-based biometric sensing methods. The feasibility for accurate test of trace OA toxin in the fortified shellfish samples was validated with the recovery yields of 88.2-107.5% and RSD of 0.5-7.6%, respectively. The result demonstrated that the oriented-aptamer encoded MNS had significant practical values in rapid and ultrasensitive detection of OA biotoxin and the related safety applications.

Screen and Optimization of an Aptamer for Alexandrium tamarense-A Common Toxin-Producing Harmful Alga

Among all the paralytic shellfish toxins (PSTs)-producing algae, Alexandrium tamarense is one of the most widespread harmful species posing a serious threat to marine resources and human health. Therefore, it is extremely important to establish a rapid and accurate monitoring method for A. tamarense that can provide early warnings of harmful algal blooms (HABs) caused by this alga and limit the contamination due to PSTs. In this study, an ssDNA library was first obtained by whole cell systematic evolution of ligands by exponential enrichment after 18 consecutive rounds of iterative screening. After sequencing in combination with subsequent multiple alignment of sequences and secondary structure simulation, the library could be classified into 2 families, namely, Family1 and Family2, according to sequence similarity. Flow cytometry was used to test the affinity and cross-reactivity of Ata19, Ata6, Ata25 and Ata29 belonging to Family2. Ata19 was selected to be modified by truncation, through which a new resultant aptamer named as Ata19-1-1 was obtained. Ata19-1-1 with a KD of 75.16 ± 11.10 nM displayed a much higher affinity than Ata19. The specificity test showed that Ata19-1-1 has the same discrimination ability as Ata19 and can at least distinguish the target microalga from other microalgae. The observation under a fluorescence microscopy showed that the A. tamarense cells labeled with Ata19-1-1 are exhibiting bright green fluorescence and could be easily identified, factually confirming the binding of the aptamer with target cells. In summary, the aptamer Ata19-1-1 produced in this study may serve as an ideal molecular recognition element for A. tamarense, which has the potential to be developed into a novel detection method for this harmful alga in the future.

Improving aptamer performance: key factors and strategies

Aptamers are functional single-stranded oligonucleotide fragments isolated from randomized libraries by Systematic Evolution of Ligands by Exponential Enrichment (SELEX), exhibiting excellent affinity and specificity toward targets. Compared with traditional antibody reagents, aptamers display many desirable properties, such as low variation and high flexibility, and they are suitable for artificial and large-scale synthesis. These advantages make aptamers have a broad application potential ranging from biosensors, bioimaging to therapeutics and other areas of application. However, the overall performance of aptamer pre-selected by SELEX screening is far from being satisfactory. To improve aptamer performance and applicability, various post-SELEX optimization methods have been developed in the last decade. In this review, we first discuss the key factors that influence the performance or properties of aptamers, and then we summarize the key strategies of post-SELEX optimization which have been successfully used to improve aptamer performance, such as truncation, extension, mutagenesis and modification, splitting, and multivalent integration. This review shall provide a comprehensive summary and discussion of post-SELEX optimization methods developed in recent years. Moreover, by discussing the mechanism of each approach, we highlight the importance of choosing the proper method to perform post-SELEX optimization.

Single-stranded DNA binding protein coupled aptasensor with carbon-gold nanoparticle amplification for marine toxins detection assisted by a miniaturized absorbance reader

Okadaic acid (OA), one of the most widely distributed marine toxins worldwide poses a severe threat to human health. Previous sensing methods for OA detection are usually based on antigen-antibody binding mechanism. However, the drawbacks of antibodies especially the enzyme-labeled antibodies, such as the harsh storage condition and high cost, lead to significant challenges to OA detection in biological samples. To overcome these limitations, a single-stranded DNA binding protein (SSB) coupled aptasensor was developed for OA detection. SSB was incubated on the microplate as a substitute for conventional OA-protein conjugations. Carbon-gold nanoparticles were synthesized and labeled with horseradish peroxidase and thiol-modified aptamers to obtain a capture probe (CGNs@HRP-Apt) instead of the enzyme-labeled antibody for signal amplification. OA and SSB competed to bind with limited aptamers on CGNs@HRP-Apt probes followed by colorimetric assay to obtain the optical signals correlated to OA concentration. To achieve on-site detection, a miniaturized and multichannel absorbance reader (Smart-plate reader) was self-designed with full automation for OA detection. Utilizing the SSB coupled aptasensor and the Smart-plate reader, our approach enables cost-effective and on-site OA sensing with a detection range of 2.5-80 ppb and an ultra-low limit of detection of 0.68 ppb. Moreover, novel OA detection kits based on the SSB coupled aptasensor were prepared which can effectively reduce the cost by 15 times lower than that of commercial ELISA kits. Therefore, the developed platform provides a favorable and promising avenue for marine toxin detection in aquaculture and food safety.

Discovery and Optimization of an Aptamer and Its Sensing Ability to Amantadine Based on SERS via Binary Metal Nanoparticles

With the growing concern of illegal abuse of amantadine (AMD) and its potential harmful impact on humans, detection of AMD has become an urgent food safety and environmental topic. Biosensing is a promising method for this, but the effective recognition of AMD still remains a challenge. Herein, we isolated an aptamer (Am-20) for AMD through a 14-round iterative selection based on capture-SELEX. The preliminary interaction mechanism between AMD and Am-20 was clarified with the help of docking simulations. Facilitated by a base mutation and truncation strategy, an optimized aptamer Am-20-1 with a short length of 62-mer was obtained, which exhibited competitive affinity with a K_d value of 33.90 ± 5.16 nM. A structure-switching SERS-based aptasensor based on Am-20-1 was then established for AMD quantification via a binary metal nanoparticle-embedded Raman reporter substrate (AuNRs@ATP@AgNPs). The fabricated strategy showed a wide linear range (0.005∼25 ng/mL) and a low limit of detection (0.001 ng/mL) for AMD determination. We envision that the novel aptamer identified in this study will provide a complementary tool for specific recognition and detection of AMD and could assist in the supervision of illegal abuse of AMD.

Development of a Chemiluminescent Method in a Microfluidic Device for Ultrasensitive Determination of Okadaic Acid with Highly Efficient Aptamer-Based Isolation

Rapid detection of okadaic acid (OA) in shellfish is crucial for practical application in food safety analysis. In order to establish a rapid, delicate detection scheme, an OA aptamer was utilized to quickly capture OA from the sample solution with polystyrene microspheres as solid phase carriers, and an inner-microchannel dam structure was designed to intercept the aptamer-functionalized microspheres to achieve the separation of OA for detection. Horseradish peroxidase (HRP) is utilized to catalyze the luminescence reaction of luminol-H2O2 solution. Through the direct competition for the aptamer between OA and OA-HRP, the rapid detection of OA can be achieved. The dynamic range of this detection method is 41.3–4.02 ng/mL, and the limit of detection (LOD) and lowest limit of quantitation (LOQ) are 12.4 pg/mL and 41.3 pg/mL, respectively. This miniaturized device enables rapid, ultrasensitive detection of OA, and demonstrates the merits of its field portability and low reagent consumption. The device can be deployed for on-site detection and analysis of marine biotoxins thereof.

De novo design of DNA aptamers that target okadaic acid (OA) by docking-then-assembling of single nucleotides

Okadaic acid (OA) is a diarrhetic shellfish poison widespread in ocean, so its detection is of great significance to seafood safety. Because of good sensitivity and low cost, biosensors using nucleic-acid aptamers as the recognition molecules are emerging as an important detection tool. However, the traditional SELEX screening method for acquiring OA high-affinity aptamers is time- and resource-intensive. Alternatively, here we developed a de novo design method based on the 3D structure of a target molecule, such as OA. Without experimental screening, this method designs OA aptamers by a computational approach of docking-then-assembling (DTA) of single nucleotides (A, C, G and T) as: (1) determining the high-affinity nucleotide binding sites of the target molecule via saturated molecular docking; (2) assembling the bound nucleotides into binding units to the target molecule; (3) constructing full-length aptamers by introducing stabilizing units to connect these binding units. In this way, five OA aptamers were designed, and microscale thermophoresis (MST) experiments verified that their K_d values are in the range of 100-600 nM; and one of them (named 9CGAT_4_a) could specifically bind to OA with low affinities for the other three marine biotoxins. Therefore, this study provides high-affinity and specific aptamers for the development of OA biosensors, and presents a promising de novo design method applicable to other target molecules.

An AuNPs-Based Fluorescent Sensor with Truncated Aptamer for Detection of Sulfaquinoxaline in Water

Herein, we developed a novel truncation technique for aptamer sequences to fabricate highly sensitive aptasensors based on molecular docking and molecular dynamics simulations. The binding mechanism and energy composition of the aptamer/sulfaquinoxaline (SQX) complexes were investigated. We successfully obtained a new SQX-specific aptamer (SBA28-1: CCCTAGGGG) with high affinity (K_d = 27.36 nM) and high specificity determined using graphene oxide. This aptamer has a unique stem-loop structure that can bind to SQX. Then, we fabricated a fluorescence aptasensor based on SBA28-1, gold nanoparticles (AuNPs), and rhodamine B (RhoB) that presented a good linear range of 1.25–160 ng/mL and a limit of detection of 1.04 ng/mL. When used to analyze water samples, the aptasensor presented acceptable recovery rates of 93.1–100.1% and coefficients of variation (CVs) of 2.2–10.2%. In conclusion, the fluorescence aptasensor can accurately and sensitively detect SQX in water samples and has good application prospects.

Emerging roles of the aptasensors as superior bioaffinity sensors for monitoring shellfish toxins in marine food chain

Shellfish toxins are derived from harmful algae and are easily accumulated in environment and marine food through the food chain, exposing high risks on human health. Preliminary rapid screening is one of the most effective monitoring ways to reduce the potential risks; however, the traditional methods encounter with many limitations, such as complicated procedures, low sensitivity and specificity, and ethical problems. Alternatively, bioaffinity sensors are proposed and draw particular attention. Among them, the aptasensors are springing up and emerging as superior alternatives in recent years, exhibiting high practicability to analyze shellfish toxins in real samples in the marine food chain. Herein, the latest research progresses of aptasensors towards shellfish toxins in the marine food chain in the past five years was reviewed for the first time, in terms of the aptamers applied in these aptasensors, construction principles, signal transduction techniques, response types, individual performance properties, practical applications, and advantages/disadvantages of these aptasensors. Synchronously, critical discussions were given and future perspectives were prospected. We hope this review can serve as a powerful reference to promote further development and application of aptasensors to monitor shellfish toxins, as well as other analytes with similar demands.

A robust colorimetric aptasensor for the label-free detection of marine toxins based on tyrosine-capped gold nanoparticles

Tyrosine-capped AuNPs decrease the interaction between targets and AuNPs, presenting better robustness than traditional Cit-AuNPs. Utilizing the superior features, a label-free aptasensor is developed for marine toxin detection for the first time.

Recent progress in micro/nano biosensors for shellfish toxin detection

Shellfish toxins, as one kind of marine toxin, have attracted worldwide attention due to their severe threat to food safety and human health. Therefore, it is highly essential and urgent to develop a low-cost and convenient method to detect these toxins. With the rapid advance in microfabrication processes, micro/nano biosensors provide novel approaches to address this issue. In addition to their features of low cost, portability, easy operation, high efficiency and high bioactivity, micro/nano biosensors have great potential to realize on-the-spot, rapid detection of shellfish toxins. This review focuses on the most recent advances in the development of micro/nano biosensors for shellfish toxin detection. These biosensors are mainly classified into five categories according to their transducer detection principles, which include optical devices, electrochemical sensors, electrochemiluminescence, field-effect transistors, and acoustic devices. Sensor strategies, toxin analytes, biosensitive elements, coupling methods and field detection performance are highlighted to discuss the applications of shellfish toxin detection. With advances in sensor technology, biomaterials, microfabrication and miniaturized electronics, micro/nano biosensors applied to in-field fast detection of shellfish toxins are expected to play a critical role in food safety, environmental monitoring, and foreign trade in the foreseeable future. Finally, the current challenges and future development trends of micro/nano biosensors for shellfish toxin detection are discussed.

Ensuring seafood safe to spoon: a brief review of biosensors for marine biotoxin monitoring

With harmful algal blooms, marine food poisoning caused by marine biotoxins frequently occurs and is life-threatening if severe. However, the conventional detection methods of marine toxins have a few limitations: low sensitivity and high-cost. Therefore, it is necessary to establish a fast and sensitive on-site detection method for real seafood sample. Biosensors based on aptamers, antibodies, and cells have been applied in marine toxins monitoring. This review presents the classification and toxic effects of marine toxins, and recent biosensor for marine toxin detection. In addition, we have compared the superiority and limitation of these biosensors. Finally, challenges and opportunities of biosensors in food safety detection were discussed. Considering the excellent results achieved by the aptasensor in the field of detection, it seems ready to be put into practical applications.

Aptamer selection and aptasensor construction for bone density biomarkers

Osteoporosis (OP) is a bone disease involved in dysregulation of one of the bone metabolism arms, formation, or desorption cause a porous bone. Osteocalcin (OC) and beta-crosslap (BC), are the well-known markers for OP, which are connected to bone formation and desorption, respectively. In addition to the OP biomarker, BC is also used as an estrogen replacement therapeutic monitoring. ELISA and other antibody-based detection methods are routinely used for measuring OC and BC. These methods have limitations that include thermostability, sensitivity, sacrificing animals, and cost of production. However, aptamer-based-assays are of interest to overcome these drawbacks and achieve the most specific and robust application. Herein, specific aptamers for OC and BC were selected by the systematic evolution of ligands by exponential enrichment (SELEX) method from the pool of ssDNA library with 60 random sequences. The binding affinity (K_d) of the selected aptamers were evaluated against the respective biomarkers. The high-affinity aptamers of OC and BC showed the K_d values of 59 and 55 nM respectively. A graphene oxide-based aptasensors were fabricated from the high-affinity aptamers, and the detection limits of OC and BC were found to be 0.4 pg/ml and 0.21 pg/ml, respectively. These aptasensors have been tested with OC and BC spiked buffer samples and validated using serum samples collected from osteoporotic rats.

Chemical Modification of Aptamers for Increased Binding Affinity in Diagnostic Applications: Current Status and Future Prospects

Aptamers are short single stranded DNA or RNA oligonucleotides that can recognize analytes with extraordinary target selectivity and affinity. Despite their promising properties and diagnostic potential, the number of commercial applications remains scarce. In order to endow them with novel recognition motifs and enhanced properties, chemical modification of aptamers has been pursued. This review focuses on chemical modifications, aimed at increasing the binding affinity for the aptamer's target either in a non-covalent or covalent fashion, hereby improving their application potential in a diagnostic context. An overview of current methodologies will be given, thereby distinguishing between pre- and post-SELEX (Systematic Evolution of Ligands by Exponential Enrichment) modifications.

Probing high-affinity aptamer binding region and development of aptasensor platform for the detection of cylindrospermopsin

Cylindrospermopsin (CYN) is one of the most concerning cyanotoxins due to its potential toxicity and spreading to various environments including drinking water. CYN has potential interferences with human and animal metabolic pathways, which influence the functions of organs including liver, kidneys, lungs, etc. CYN is involved in the inhibition of protein synthesis and detachment of ribosomes from the endoplasmic reticulum membrane. It also interacts with soluble proteins, which are associated with protein translations. It is believed that cytochrome 450 is responsible for the rapid toxicity of CYN. Researchers are urged to develop a high-throughput screening method for the detection of CYN in water. Construction of low cost, rapid, and sensitive analytical methods for the detection of CYN is challenging. Here, we used graphene oxide (GO) as the fluorescence sensing platform for probing the high affinity of the short aptamer derived from the wild-type long aptamer-CYN sensing. The biosensor construction involved two steps: first, quenching the fluorescence of fluorescent-labelled truncated aptamer using GO as a quencher and, second, fluorescence recovery in the presence of CYN by competitive binding between the target and GO. One of the truncate aptamers has a 12-fold higher affinity and enhances sensitivity compared to the long aptamer sequence. The limit of detection of the high affinity truncated aptamer is 17 pM which is 6-fold lower than the long aptamer (100 pM). The sensor specifically detects CYN in the presence of other potential interfering toxins. The performance of the sensor was validated using CYN spiked tap water with very good recovery percentage. A rapid and highly sensitive detection of CYN from water resources has been achieved using this method.

Selection and application of aptamers with high-affinity and high-specificity against dinophysistoxin-1

Diarrhetic shellfish toxins (DSTs) are marine toxins distributed widely in the world, which pose a major threat to the health of mankind. Dinophysistoxin-1 (DTX-1) has the most potent toxicity in DSTs. However, the current detection methods have ethical problems and technical defects. Further research is needed, to develop a more suitable alternative to the supervision system. In this work, we successfully obtained an aptamer with high affinity and specificity bound to DTX-1 for the first time. After optimization, a core sequence of the aptamer with a higher K_D of 64 nM was obtained, while the binding mode of the core sequence and DTX-1 was explored. Based on this aptamer, we developed a biolayer interferometry (BLI) biosensor platform for DTX-1 detection. The aptasensor exhibited a broad detection range from 40 to 600 nM DTX-1 (linear range from 80 to 200 nM), and the low detection limit was 614 pM. Morever, the aptasensor showed good reproducibility and stability, which indicated that this novel aptasensor had broad development prospects for the sensitive and rapid detection of DTX-1.

For the first time, the aptamer of dinophysistoxin-1 was successfully obtained with high affinity and specificity by SELEX, and an aptasensor with a detection range from 40 to 600 nM was developed by biolayer interferometry.

Aptameric biosensor for the sensitive detection of major shrimp allergen, tropomyosin

The development of a sensitive and rapid detection approach for allergens in various food matrices is essential to assist patients in managing their allergies. The most common methods used for allergen detection are based on immunoassays, PCR and mass spectrometry. However, all of them are very complex and time-consuming. Herein, an aptamer biosensor for the detection of the major shrimp allergen tropomyosin (TM) was developed. Graphene oxide (GO) was used as a platform for screening of the minimal-length aptamer sequence required for high-affinity target binding. A fluorescein dye labeled GO quenches the truncated aptamer by π-stacking interactions. After the addition of TM, the fluorescence was restored due to the competitive binding of the aptamer to GO. One of the truncated aptamers was found to bind to TM with four-fold higher affinity (30 nM) compared to the full-length aptamer (124 nM), with a limit of detection (LOD) of 2 nM. The aptamer-based sensor demonstrates the sensitive, selective, and specific detection of TM in 30 min. The performance of the sensor was confirmed using TM spiked chicken soup, resulting in a high percentage recovery (~97 ± 10%). The association of GO and labelled aptamer sensor platform has shown the rapid detection of TM in food, which is compared to other methods very sensitive, specific and performs in high throughput application.