Efficacy of laser monotherapy or non-surgical mechanical instrumentation in the management of untreated periodontitis patients. A systematic review and meta-analysis

Gingival overgrowth approached using recent mechanical and laser technologies: A case report

Gingival enlargement is a side effect of different drug classes, with calcium channel blockers being among the most often cited examples. Most often accompanied by a disruption in the oral biofilm, this form of gingival overgrowth, with histological signs of hyperplasia and hypertrophy, becomes a chronic inflammatory condition with the oral biofilm a primary cause. This periodontal disease is now classified as 'dental biofilm-induced gingivitis', and its preferred name is drug-influenced gingival expansion. The present study presented the case of a patient with gingival enlargement while being treated with nifedipine for cardiac disease. This patient had factors that contributed to the retention of bacteria, ranging from poor oral hygiene practices to poorly adapted prosthodontics. After reducing these factors, a multimodal treatment was conducted, including bacterial mechanical decontamination through guided biofilm therapy protocol, laser bacterial decontamination, and surgical laser gingivectomy. The patient was referred to their cardiologist for substituting the calcium channel blocker medication. Clinical evaluations followed each treatment step. At 12 months, the patient presented positive, stable results, with an improvement in gingival status (no gingival overgrowth in the area where all risk factors were eliminated and minimal overgrowth in the area where old poorly marginally adapted prosthodontics were kept in place and no/minimal signs of gingival inflammation).

An Overview of the Systematic Evidence on the Adjunctive Use of Laser Therapy in Non-surgical Periodontal Treatment

This overview aimed to recapitulate the evidence related to laser application in non-surgical periodontal treatment along with conventional periodontal treatment for optimum clinical practice based on the available systematic reviews (SRs). An advanced literature search in the English language was conducted in the PubMed, Medical Literature Analysis and Retrieval System Online (MEDLINE), ScienceDirect, and Scopus databases from January 2000 to October 2022. Two independent reviewers screened all the databases and extracted the data in duplicate. The risk of bias in the selected studies was assessed with the Methodological Quality of Systematic Reviews 2 (AMSTAR 2) guideline for SRs. Cohen's kappa statistics were performed to assess the level of agreement for the assessment of the risk of bias. A total of 556 studies (PubMed = 115, Scopus = 66, ScienceDirect = 298, and MEDLINE = 77) were identified after the initial search using the keywords from different databases. After removing the duplicates and assessing the full manuscripts, a total of 24 studies were selected based on the inclusion criteria for the current overview. A total of three, four, 12, and five systematic reviews were classified as high, moderate, low, and critically low-quality SRs as per the AMSTAR 2 quality assessment tool. Cohen's Kappa statistics showed perfect (𝛋 =1.000) agreement between the two reviewers. Adjunctive laser therapy along with conventional non-surgical periodontal treatment might be effective in short-term treatment outcomes; however, evidence of long-term effects is still lacking.

Laser treatments as an adjunct to non-surgical periodontal therapy in subjects with periodontitis and type 2 diabetes mellitus: a systematic review and meta-analysis

OBJECTIVES

Periodontal disease and diabetes have an extensively investigated bidirectional correlation. Non-surgical periodontal treatment (NSPT) was proven to contribute to glycemic control. Moreover, it may benefit from the association of adjunctive therapies. The aim of the present systematic review is to assess the clinical efficacy of NSPT in association with laser (LT) or photodynamic therapy (PDT) in controlled or uncontrolled diabetic patients, and to grade the level of evidence.

MATERIALS AND METHODS

Randomized controlled clinical trials with at least 3-month follow-up were searched in MEDLINE via OVID, EMBASE, and Cochrane Central, screened for inclusion, and grouped based on the performed treatments, follow-up time, type of diabetes, and level of glycemic control.

RESULTS

Eleven RCTs with 504 total subjects were included. The adjunct of PDT showed a statistically significant 6-month difference in PD changes (with low certainty of evidence), but not in CAL changes, while a significant difference in 3-month PD and CAL changes was found with the adjunct of LT (low certainty of evidence). Patients treated with PDT registered a higher decrease in HbA1c levels at 3 months, but no significant difference was noted at 6 months; LT also led to better HbA1c changes at 3 months with a moderate certainty of evidence.

CONCLUSION

Despite the promising short-term HbA1c decrease, the results should be interpreted with caution due to the small effect sizes and the statistical heterogeneity, and further evidence from well-designed RCTs is needed to support the routine use of PDT or LT in adjunct to NSPT.

Influence of Er:YAG laser irradiation on surface properties of Ti-6Al-4V machined and hydroxyapatite coated

Surface treatment by laser irradiation can change the topography of titanium; however, little is known about the changes it causes when applied to other coatings. This study aimed to evaluate the influence of Er:YAG laser irradiation on the surface properties of titanium-aluminum-vanadium (Ti-6Al-4V) discs. Four Ti-6Al-4V surfaces were evaluated (n = 10): CON-control, machined without surface treatment; LT-machined + laser treatment; HA-hydroxyapatite coating; and LT-HA-hydroxyapatite coating + laser treatment. For the laser treatment, an Er:YAG laser with a wavelength of 2940 nm, a frequency of 10 Hz, and an energy density of 12.8 J/cm2 was used. The morphology of the coating was investigated by scanning electron microscopy and the surface composition by energy-dispersive X-ray spectroscopy. The influence of laser irradiation treatment on roughness and wettability was also evaluated. The Er:YAG laser promoted a significant reduction in the roughness Sa (p < 0.05) and in the contact angle (p = 0.002) of the LT surface compared to the CON surface. On the LT-HA surface, a significant decrease in roughness was observed only for the Rz parameter (p = 0.015) and an increase in the contact angle (p < 0.001) compared to the HA surface. The use of the Er:YAG laser with the evaluated parameters decreased the surface roughness and improved the wetting capacity of machined without surface treatment. In the group with hydroxyapatite coating, the laser influenced the surface roughness only for the parameter Rz and reduced their wetting capacity.

Enamel matrix derivative as adjunctive to non-surgical periodontal therapy: a systematic review and meta-analysis of randomized controlled trials

Objectives

To assess the potential additional benefit of the local application of enamel matrix derivative (EMD) on the clinical outcomes following non-surgical periodontal therapy (NSPT) (steps 1 and 2 periodontal therapy).

Materials and Methods

A systematic literature search was performed in several electronic databases, including Medline/PubMed, Embase, The Cochrane Register of Central Trials (CENTRAL), LILACS, and grey literature. Only randomized controlled clinical trials (RCTs) were eligible for inclusion. Clinical attachment level (CAL) change (primary outcome), probing pocket depth (PPD), and bleeding on probing (BoP) reductions (secondary outcomes) were evaluated. The Cochrane Risk of Bias tool (RoB 2.0) was used to assess the quality of the included trials. Weighted mean differences (WMDs) and 95% confidence intervals (CIs) between test and control sites were estimated using a random-effect model for amount of mean CAL and PPD change.

Results

Six RCTs were included for the qualitative analysis, while data from 4 studies were used for meta-analysis. Overall analysis of CAL gain (3 studies) and PPD reduction (4 studies) presented WMD of 0.14 mm (p = 0.74; CI 95% − 0.66; 0.94) and 0.46 mm (p = 0.25; CI 95% − 0.33; 1.26) in favor of NSPT + EMD compared to NSPT alone respectively. Statistical heterogeneity was found to be high in both cases (I² = 79% and 87%, respectively).

Conclusions

Within their limitations, the present data indicate that the local application of EMD does not lead to additional clinical benefits after 3 to 12 months when used as an adjunctive to NSPT. However, due to the high heterogeneity among the studies, additional well-designed RCTs are needed to provide further evidence on this clinical indication for the use of EMD.

Clinical relevance

The adjunctive use of EMD to NSPT does not seem to additionally improve the clinical outcomes obtained with NSPT alone.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00784-022-04474-1.

The preventive care of medication-related osteonecrosis of the jaw (MRONJ): a position paper by Italian experts for dental hygienists

PURPOSE

The prevention and early diagnosis of medication-related osteonecrosis of the jaw (MRONJ) is fundamental to reducing the incidence and progression of MRONJ. Many in the field believe that dental hygienists should play an integral role in primary and secondary MRONJ prevention. However, to date, very few publications in the literature have proposed standardised MRONJ protocols, which are dedicated to dental hygienists. The aim of this study was to provide guidance to the health care providers managing MRONJ.

METHODS

The expert opinion in this study was developed by dental hygienists from the main Italian technical-scientific associations (Italian Dental Hygienists Association, AIDI and National Union of Dental Hygienists, UNID) and authors of the latest Italian recommendations regarding MRONJ from the field of dentistry and maxillofacial surgery.

RESULTS

The oral care protocol outlined in this position paper is focused on the role of dental hygienist in patients at risk or affected by MRONJ, and it regards 3 main issues: primary prevention, secondary prevention and supporting the treatment of MRONJ. Each issue contains easy-to-apply indications and procedures, as described by the authors, regarding the role of the dental hygienist.

CONCLUSION

Referring to the main issues under consideration (primary prevention, secondary prevention and the treatment of MRONJ), a clinical examination of periodontal tissue is critical in preventing MRONJ. It is the opinion of the authors of this study that the application of a periodontal screening score is fundamental in defining personalised strategies for patients at risk of MRONJ. By means of these basic procedures, a protocol for assisting the health care provider and the presentation of a practical approach for patients at risk or affected by MRONJ are described in this study.

Disinfection Potential of 980 nm Diode Laser and Hydrogen Peroxide (3%) in "Critical Probing Depths" Periodontal Pockets: Retrospective Study

A successful treatment of periodontitis depends largely on the successful elimination of the periodontopathogens during non-surgical and surgical mechanical debridement. In this retrospective study, data collection was conducted from 2017 to 2021. The retrospective study included 128 patients with 128 sites of localized periodontitis with pocket depths > 5 mm. The included data were based on sites that received conventional mechanical debridement followed by different adjunctive approaches. In total, 30 patients did not receive any additional treatment (SRP group), 30 patients received SRP + 980 nm diode laser irradiation only (SRP + laser), 30 patients received SRP + 3% hydrogen peroxide irrigation (SRP + H2O2) only and 30 patients received a combined treatment of 3% hydrogen peroxide and 980 nm diode laser irradiation (SRP + H2O2 + laser). Total bacterial counts (TBC) in the periodontal pocket collected for all participants before treatment, immediately after treatment, 6 weeks after treatment, 12 weeks after treatment and 6 months after treatment were statistically analyzed and compared. When the laser was used, irradiation parameters were 10 μsec/pulse duration, 10 kHz, pick power of 10 W, average power of 1 W, irradiation time of one minute with inward and outward movements, and fiber diameter of 320 μm. The irradiation was repeated 3 times/pocket. When hydrogen peroxide was used, the irrigation was conducted for one minute and repeated 3 times. The maximum reduction in TBC was obtained when SRP was coupled with 3% H2O2 irrigation followed by 980 nm diode laser irradiation. After six months of follow-up, a significant reduction in TBC was obtained for the group of SRP + H2O2 + laser when compared to all the other groups, from 7.27 × 107 before intervention to 3.21 × 107 after six months. All three approaches to SRP showed a significant reduction in TBC immediately after treatment. Values were 3.52 × 107, 4.01 × 106, 9.58 × 106, 1.98 × 106 for SRP alone, SRP + diode, SRP + H2O2 and SRP + H2O2 + diode laser, respectively. At 6 months, we saw no significant difference between SRP + laser and SRP + H2O2 with 4.01 × 107 and 4.32 × 107, respectively. This retrospective study reveals that after SRP, irrigation with 3% hydrogen peroxide and irradiation with a 980 nm diode laser within specific treatment protocol can be used as an additional approach to conventional SRP to increase the disinfection of the periodontal pockets > 5 mm.

Efficacy of Er:YAG laser irradiation for decontamination and its effect on biocompatibility of different titanium surfaces

Background

Erbium yttrium–aluminum–garnet (Er:YAG) laser have been shown to be suitable for decontamination of titanium surfaces at a wide range of energy settings, however, high intensity of laser irradiation destroy titanium surface and low intensity cannot remove enough microbial biofilm. The aim of this study was to investigate the optimal energy setting of Er:YAG laser for decontamination of sandblasted/acid-etched (SLA) and hydroxyapatite (HA) titanium surfaces.

Material and methods

After supragingival biofilm construction in vivo, SLA and HA titanium discs were divided into three groups: blank control (BC, clean discs), experimental control (EC, contaminated discs) and experimental groups (EP, contaminated discs irradiated by Er:YAG laser at 40, 70, and 100 mJ/pulse). Scanning electron microscopy (SEM), live/dead bacterial fluorescent detection, and colony counting assay were used to detect the efficacy of laser decontamination. To investigate the effect of laser decontamination on titanium surface biocompatibility, MC3T3-E1 cell adhesion and proliferation activity were examined by SEM and CCK-8 assay.

Results

Er:YAG laser irradiation at 100 mJ/pulse removed 84.1% of bacteria from SLA titanium surface; laser irradiation at 70 and 100 mJ/pulse removed 76.4% and 77.85% of bacteria from HA titanium surface respectively. Laser irradiation improved MC3T3-E1 cell adhesion on both titanium surfaces. For SLA titanium discs, 100 mJ/pulse group displayed excellent cellular proliferation activity higher than that in BC group (P < 0.01). For HA titanium discs, 70 mJ/pulse group showed the highest activity comparable to BC group (P > 0.05).

Conclusions

With regards to efficient microbial biofilm decontamination and biocompatibility maintenance, Er:YAG laser at 100 mJ/pulse and 70 mJ/pulse are considered as the optimal energy settings for SLA titanium and HA titanium surface respectively. This study provides theoretical basis for the clinical application of Er:YAG laser in the treatment of peri-implantitis.

Adjunctive Er:YAG laser in non-surgical periodontal therapy of patients with inadequately controlled type 2 diabetes mellitus: A split-mouth randomized controlled study

BACKGROUND AND OBJECTIVE

Limited studies are available comparing the outcomes of non-surgical periodontal therapy (NSPT) with or without adjunctive Er:YAG laser (ERL) in patients with type 2 diabetes mellitus (T2DM). This study evaluated the effects of ERL adjunctive NSPT on single-rooted teeth of inadequately controlled T2DM patients with periodontitis.

METHODS

Twenty-two inadequately controlled T2DM participants with periodontitis were recruited. Adopting a double-blinded split-mouth design and under block randomization, we investigated the effects of ERL in calculus removal then degranulation mode, or a sham treatment, adjunct NSPT, which included two visits of full-mouth root surface debridement delivered within 4-10 days, to test or control single-rooted teeth (Wuxi Stomatology Hospital, trial 2017-016). We followed periodontal parameters (plaque %, bleeding on probing [BOP] %, probing pocket depth [PPD], probing attachment level [PAL]) and selected systemic parameters (fasting plasma glucose [FPG], glycosylated hemoglobin [HbA1c%], high sensitivity C-reactive protein) at baseline, one, three, and six months after periodontal treatment.

RESULTS

The study was completed as planned. Periodontal parameters, FPG and HbA1c% of the 22 participants appeared significantly improved at six months (p < 0.001). The 44 ERL treated, compared to 44 sham treated single-rooted teeth exhibited significant improvement in BOP, mean PPD, and mean PAL at various postoperative follow-up time points (effect size ≥0.44; p < 0.001). No adverse event was reported.

CONCLUSION

Periodontal treatment outcomes in the T2DM patients with inadequate glycemic control were better in the single-rooted teeth received ERL adjunct NSPT. Further studies are warranted to confirm the observations reported in this short-term clinical study.

Erbium-doped: yttrium-aluminum-garnet (Er:YAG) versus scaling and root planing for the treatment of periodontal disease: A single-blinded split-mouth randomized clinical trial

BACKGROUND

This randomized, controlled clinical trial aimed to compare the differences in periodontal clinical outcomes, duration of the procedure, and patient's experience between conventional scaling and root planing and erbium-doped: yttrium-aluminum-garnet (Er:YAG) in the treatment of generalized moderate to severe chronic periodontitis or generalized Stages II or III, and Grade B periodontitis based on the Centers for Disease Control (CDC), American Academy of Periodontology (AAP), and European Federation of Periodontology (EFP) definitions.

METHODS

Thirty subjects were initially recruited. In a split-mouth fashion, right and left sides were randomly allocated into two treatment arms: conventional scaling and root planing (C-SRP) versus laser-assisted scaling and root planing (L-SRP). A blinded examiner recorded clinical measurements at baseline and 3 months. Duration of the procedure was also recorded for each visit, and the patient's experience was assessed with a questionnaire at baseline, 1, and 3 months.

RESULTS

The final sample consisted of 26 subjects. Both treatments resulted in overall improvement, but no significant differences were found between modalities for clinical attachment gain or probing depth reduction. The duration of the procedure was approximately half for L-SRP, and postoperative sensitivity was greater in C-SRP.

CONCLUSIONS

The low-energy protocol with Er:YAG (50 mJ) used for the non-surgical treatment of moderate-severe chronic or Stage II-III, Grade B periodontitis performed in this study population was a treatment modality that yielded similar clinical improvements when compared to conventional scaling and root planing.

The Use of Lasers in Dental Materials: A Review

Lasers have been well integrated in clinical dentistry for the last two decades, providing clinical alternatives in the management of both soft and hard tissues with an expanding use in the field of dental materials. One of their main advantages is that they can deliver very low to very high concentrated power at an exact point on any substrate by all possible means. The aim of this review is to thoroughly analyze the use of lasers in the processing of dental materials and to enlighten the new trends in laser technology focused on dental material management. New approaches for the elaboration of dental materials that require high energy levels and delicate processing, such as metals, ceramics, and resins are provided, while time consuming laboratory procedures, such as cutting restorative materials, welding, and sintering are facilitated. In addition, surface characteristics of titanium alloys and high strength ceramics can be altered. Finally, the potential of lasers to increase the adhesion of zirconia ceramics to different substrates has been tested for all laser devices, including a new ultrafast generation of lasers.