Comparative genomic analysis of solvent extrusion pumps in Pseudomonas strains exhibiting different degrees of solvent tolerance

Evolution-guided tolerance engineering of Pseudomonas putida KT2440 for production of the aviation fuel precursor isoprenol

Isoprenol (3-methyl-3-buten-1-ol) is a precursor to aviation fuels and other commodity chemicals and can be microbially synthesized from renewable carbon streams. Its production has been demonstrated in Pseudomonas putida KT2440 but its titers, rates, and yields have yet to reach commercially viable levels, potentially due to toxicity to the bacterial chassis. We hypothesized that utilization of Tolerization Adaptive Laboratory Evolution (TALE) would generate P. putida hosts more tolerant to isoprenol and suitable for enhanced production phenotypes. Here, we performed a comprehensive TALE campaign using three strains, the wild-type and two strains lacking subsets of known isoprenol catabolism and transport functions in quadruplicate independently evolved lineages. Several evolved clones from each starting strain displayed robust growth (up to 0.2 h-1) at 8 g/L of isoprenol, where starting strains could not grow. Whole genome resequencing of the 12 independent strain lineages identified convergent mutations. Reverse engineering each of the four commonly mutated regions individually (gnuR, ttgB-PP_1394, PP_3024-PP_5558, PP_1695) resulted in a partial recovery of the tolerance phenotypes observed in the evolved strains. Additionally, a proteomics-guided deletion of the master motility regulator, fleQ, in an evolved clone alleviated the tolerance vs. production trade-off, restoring isoprenol titers and consumption to levels observed in the starting strains. Collectively, this work demonstrated that an integrated strategy of laboratory evolution and rational engineering was effective to develop robust biofuel production hosts with minimized product toxicity.

Genome streamlining of Pseudomonas putida B6-2 for bioremediation

Microbial transformation is a favored approach for environmental remediation. However, the effectiveness of microbial remediation has been limited by the lack of chassis cells with satisfactory contaminant degradation performance. Pseudomonas putida B6-2, with a wide substrate spectrum and high solvent tolerance, is a chassis strain with great potential for application in environmental remediation. Here, guided by bioinformatic analyses and genome-scale metabolic model (GEM) predictions, we successfully optimized P. putida B6-2 by rationally reducing its nonessential genetic components and generating a more robust genome-streamlined strain, P. putida BGR4. Several improvements were observed compared with the original P. putida B6-2 strain, including a 1.4 × 105-fold increase in electroporation efficiency, an 8.3-fold increase in conjugation efficiency, improved glycerol utilization capability, and increased phenol utilization after heterologous expression of the phenol monooxygenase encoded by dmpKLMNOP. Additionally, P. putida BGR4 exhibited enhanced tolerance to several stressors, including starvation, oxidative stress, and DNA damage. Transcriptomic analysis revealed that genome streamlining led to the upregulation of genes involved in the "carbon metabolism" and "tricarboxylic acid cycle" pathways in P. putida BGR4, which likely contributed to the superior phenotype of P. putida BGR4 in terms of carbon source utilization and contaminant degradation capabilities. Furthermore, the absence of four prophages was identified as a potential cause of the enhanced stress resistance observed in P. putida BGR4. Overall, we developed a combined genome-streamlining strategy involving bioinformatic analyses and GEM predictions and generated a more robust chassis strain, P. putida BGR4, which expands the repertoire of chassis cells for environmental remediation.IMPORTANCEDespite the development of many chassis cells, there is still a lack of robust chassis cells with satisfactory contaminant degradation performance. Targeted genome streamlining is an effective way to provide powerful chassis cells. However, genome streamlining does not always lead to the improved phenotypes of genome-streamlined chassis cells. In this research, a novel procedure that combined bioinformatic analyses and GEM predictions was proposed to guide genome streamlining and predict the effects of genome streamlining. This genome streamlining procedure was successfully applied to Pseudomonas putida B6-2, which was a chassis cell with great potential for application in environmental remediation and resulted in the generation of a more robust chassis cell, P. putida BGR4, thereby providing a superior chassis cell for efficient and sustainable environmental remediation and a valuable framework for guiding the genome streamlining of strains for other applications.

Insights into the susceptibility of Pseudomonas putida to industrially relevant aromatic hydrocarbons that it can synthesize from sugars

Pseudomonas putida DOT-T1E is a highly solvent tolerant strain for which many genetic tools have been developed. The strain represents a promising candidate host for the synthesis of aromatic compounds-opening a path towards a green alternative to petrol-derived chemicals. We have engineered this strain to produce phenylalanine, which can then be used as a raw material for the synthesis of styrene via trans-cinnamic acid. To understand the response of this strain to the bioproducts of interest, we have analyzed the in-depth physiological and genetic response of the strain to these compounds. We found that in response to the exposure to the toxic compounds that the strain can produce, the cell launches a multifactorial response to enhance membrane impermeabilization. This process occurs via the activation of a cis to trans isomerase that converts cis unsaturated fatty acids to their corresponding trans isomers. In addition, the bacterial cells initiate a stress response program that involves the synthesis of a number of chaperones and ROS removing enzymes, such as peroxidases and superoxide dismutases. The strain also responds by enhancing the metabolism of glucose through the specific induction of the glucose phosphorylative pathway, Entner-Doudoroff enzymes, Krebs cycle enzymes and Nuo. In step with these changes, the cells induce two efflux pumps to extrude the toxic chemicals. Through analyzing a wide collection of efflux pump mutants, we found that the most relevant pump is TtgGHI, which is controlled by the TtgV regulator.

Proteomic Characterization of the Pseudomonas sp. Strain phDV1 Response to Monocyclic Aromatic Compounds

The degradation of aromatic compounds comprises an important step in the removal of pollutants and re-utilization of plastics and other non-biological polymers. Here, Pseudomonas sp. strain phDV1, a gram-negative bacterium that is selected for its ability to degrade aromatic compounds is studied. In order to understand how the aromatic compounds and their degradation products are reintroduced in the metabolism of the bacteria and the systematic/metabolic response of the bacterium to the new carbon source, the proteome of this strain is analyzed in the presence of succinate, phenol, and o-, m-, and p-cresol as the sole carbon source. As a reference proteome, the bacteria are grown in succinate and then compared with the respective proteomes of bacteria grown on phenol and different cresols. In total, 2295 proteins are identified; 1908 proteins are used for quantification between different growth conditions. The carbon source affects the synthesis of enzymes related to aromatic compound degradation and in particular the enzyme involved in the meta-pathway of monocyclic aromatic compounds degradation. In addition, proteins involved in the production of polyhydroxyalkanoate (PHA), an attractive biomaterial, show higher abundance in the presence of monocyclic aromatic compounds. The results provide, for the first time, comprehensive information on the proteome response of this strain to monocyclic aromatic compounds.

Role of efflux in enhancing butanol tolerance of bacteria

N-butanol, a valued solvent and potential fuel extender, could possibly be produced by fermentation using either native producers, i.e. solventogenic Clostridia, or engineered platform organisms such as Escherichia coli or Pseudomonas species, if the main process obstacle, a low final butanol concentration, could be overcome. A low final concentration of butanol is the result of its high toxicity to production cells. Nevertheless, bacteria have developed several mechanisms to cope with this toxicity and one of them is active butanol efflux. This review presents information about a few well characterized butanol efflux pumps from Gram-negative bacteria (P. putida and E. coli) and summarizes knowledge about putative butanol efflux systems in Gram-positive bacteria.

Investigation of monoterpenoid resistance mechanisms in Pseudomonas putida and their consequences for biotransformations

Monoterpenoids are widely used in industrial applications, e.g. as active ingredients in pharmaceuticals, in flavor and fragrance compositions, and in agriculture. Severe toxic effects are known for some monoterpenoids making them challenging compounds for biotechnological production processes. Some strains of the bacterium Pseudomonas putida show an inherent extraordinarily high tolerance towards solvents including monoterpenoids. An understanding of the underlying factors can help to create suitable strains for monoterpenoids de novo production or conversion. In addition, knowledge about tolerance mechanisms could allow a deeper insight into how bacteria can oppose monoterpenoid containing drugs, like tea tree oil. Within this work, the resistance mechanisms of P. putida GS1 were investigated using selected monoterpenoid-hypertolerant mutants. Most of the mutations were found in efflux pump promoter regions or associated transcription factors. Surprisingly, while for the tested monoterpenoid alcohols, ketone, and ether high efflux pump expression increased monoterpenoid tolerance, it reduced the tolerance against geranic acid. However, an increase of geranic acid tolerance could be gained by a mutation in an efflux pump component. It was also found that increased monoterpenoid tolerance can counteract efficient biotransformation ability, indicating the need for a fine-tuned and knowledge-based tolerance improvement for production strain development.Key points• Altered monoterpenoid tolerance mainly related to altered activity of efflux pumps.• Increased tolerance to geranic acid surprisingly caused by decreased export activity. • Reduction of export activity can be beneficial for biotechnological conversions.

Regulation of solvent tolerance in Pseudomonas putida S12 mediated by mobile elements

Organic solvent‐tolerant bacteria are outstanding and versatile hosts for the bio‐based production of a broad range of generally toxic aromatic compounds. The energetically costly solvent tolerance mechanisms are subject to multiple levels of regulation, involving among other mobile genetic elements. The genome of the solvent‐tolerant Pseudomonas putida S12 contains many such mobile elements that play a major role in the regulation and adaptation to various stress conditions, including the regulation of expression of the solvent efflux pump SrpABC. We recently sequenced the genome of P. putida S12. Detailed annotation identified a threefold higher copy number of the mobile element ISS12 in contrast to earlier observations. In this study, we describe the mobile genetic elements and elaborate on the role of ISS12 in the establishment and maintenance of solvent tolerance in P. putida. We identified three different variants of ISS12 of which a single variant exhibits a high translocation rate. One copy of this variant caused a loss of solvent tolerance in the sequenced strain by disruption of srpA. Solvent tolerance could be restored by applying selective pressure, leading to a clean excision of the mobile element.

Global transcriptional response of solvent-sensitive and solvent-tolerant Pseudomonas putida strains exposed to toluene

Pseudomonas putida strains are generally recognized as solvent tolerant, exhibiting varied sensitivity to organic solvents. Pan-genome analysis has revealed that 30% of genes belong to the core-genome of Pseudomonas. Accessory and unique genes confer high degree of adaptability and capabilities for the degradation and synthesis of a wide range of chemicals. For the use of these microbes in bioremediation and biocatalysis, it is critical to understand the mechanisms underlying these phenotypic differences. In this study, RNA-seq analysis compared the short- and long-term responses of the toluene-sensitive KT2440 strain and the highly tolerant DOT-T1E strain. The sensitive strain activates a larger number of genes in a higher magnitude than DOT-T1E. This is expected because KT2440 bears one toluene tolerant pump, while DOT-T1E encodes three of these pumps. Both strains activate membrane modifications to reduce toluene membrane permeability. The KT2440 strain activates the TCA cycle to generate energy, while avoiding energy-intensive processes such as flagellar biosynthesis. This suggests that KT2440 responds to toluene by focusing on survival mechanisms. The DOT-T1E strain activates toluene degradation pathways, using toluene as source of energy. Among the unique genes encoded by DOT-T1E is a 70 kb island composed of genes of unknown function induced in response to toluene.

New family of biosensors for monitoring BTX in aquatic and edaphic environments

Benzene, toluene, ethylbenzene and xylenes (BTEX) contamination is a serious threat to public health and the environment, and therefore, there is an urgent need to detect its presence in nature. The use of whole-cell reporters is an efficient, easy-to-use and low-cost approach to detect and follow contaminants outside specialized laboratories; this is especially important in oil spills that are frequent in marine environments. The aim of this study is the construction of a bioreporter system and its comparison and validation for the specific detection of monocyclic aromatic hydrocarbons in different host bacteria and environmental samples. Our bioreporter system is based on the two component regulatory system TodS-TodT of P. putida DOT-T1E, and the PtodX promoter fused to the GFP protein as the reporter protein. For the construction of different biosensors, this bioreporter was transferred into three different bacterial strains isolated from three different environments, and their performance was measured. Validation of the biosensors on water samples spiked with petrol, diesel and crude oil on contaminated waters from oil spills and on contaminated soils demonstrated that they can be used in mapping and monitoring some BTEX compounds (specifically benzene, toluene and two xylene isomers). Validation of biosensors is an important issue for the integration of these devices into pollution-control programmes.

Plasmid-Mediated Tolerance Toward Environmental Pollutants

The survival capacity of microorganisms in a contaminated environment is limited by the concentration and/or toxicity of the pollutant. Through evolutionary processes, some bacteria have developed or acquired mechanisms to cope with the deleterious effects of toxic compounds, a phenomenon known as tolerance. Common mechanisms of tolerance include the extrusion of contaminants to the outer media and, when concentrations of pollutants are low, the degradation of the toxic compound. For both of these approaches, plasmids that encode genes for the degradation of contaminants such as toluene, naphthalene, phenol, nitrobenzene, and triazine or are involved in tolerance toward organic solvents and heavy metals, play an important role in the evolution and dissemination of these catabolic pathways and efflux pumps. Environmental plasmids are often conjugative and can transfer their genes between different strains; furthermore, many catabolic or efflux pump genes are often associated with transposable elements, making them one of the major players in bacterial evolution. In this review, we will briefly describe catabolic and tolerance plasmids and advances in the knowledge and biotechnological applications of these plasmids.

Engineering of Pseudomonas taiwanensis VLB120 for constitutive solvent tolerance and increased specific styrene epoxidation activity

The application of whole cells as biocatalysts is often limited by the toxicity of organic solvents, which constitute interesting substrates/products or can be used as a second phase for in situ product removal and as tools to control multistep biocatalysis. Solvent-tolerant bacteria, especially Pseudomonas strains, are proposed as promising hosts to overcome such limitations due to their inherent solvent tolerance mechanisms. However, potential industrial applications suffer from tedious, unproductive adaptation processes, phenotypic variability, and instable solvent-tolerant phenotypes. In this study, genes described to be involved in solvent tolerance were identified in Pseudomonas taiwanensis VLB120, and adaptive solvent tolerance was proven by cultivation in the presence of 1% (vol/vol) toluene. Deletion of ttgV, coding for the specific transcriptional repressor of solvent efflux pump TtgGHI gene expression, led to constitutively solvent-tolerant mutants of P. taiwanensis VLB120 and VLB120ΔC. Interestingly, the increased amount of solvent efflux pumps enhanced not only growth in the presence of toluene and styrene but also the biocatalytic performance in terms of stereospecific styrene epoxidation, although proton-driven solvent efflux is expected to compete with the styrene monooxygenase for metabolic energy. Compared to that of the P. taiwanensis VLB120ΔC parent strain, the maximum specific epoxidation activity of P. taiwanensis VLB120ΔCΔttgV doubled to 67 U/g of cells (dry weight). This study shows that solvent tolerance mechanisms, e.g., the solvent efflux pump TtgGHI, not only allow for growth in the presence of organic compounds but can also be used as tools to improve redox biocatalysis involving organic solvents.

Mobility and generation of mosaic non-autonomous transposons by Tn3-derived inverted-repeat miniature elements (TIMEs)

Functional transposable elements (TEs) of several Pseudomonas spp. strains isolated from black shale ore of Lubin mine and from post-flotation tailings of Zelazny Most in Poland, were identified using a positive selection trap plasmid strategy. This approach led to the capture and characterization of (i) 13 insertion sequences from 5 IS families (IS3, IS5, ISL3, IS30 and IS1380), (ii) isoforms of two Tn3-family transposons – Tn5563a and Tn4662a (the latter contains a toxin-antitoxin system), as well as (iii) non-autonomous TEs of diverse structure, ranging in size from 262 to 3892 bp. The non-autonomous elements transposed into AT-rich DNA regions and generated 5- or 6-bp sequence duplications at the target site of transposition. Although these TEs lack a transposase gene, they contain homologous 38-bp-long terminal inverted repeat sequences (IRs), highly conserved in Tn5563a and many other Tn3-family transposons. The simplest elements of this type, designated TIMEs (Tn3 family-derived Inverted-repeat Miniature Elements) (262 bp), were identified within two natural plasmids (pZM1P1 and pLM8P2) of Pseudomonas spp. It was demonstrated that TIMEs are able to mobilize segments of plasmid DNA for transposition, which results in the generation of more complex non-autonomous elements, resembling IS-driven composite transposons in structure. Such transposon-like elements may contain different functional genetic modules in their core regions, including plasmid replication systems. Another non-autonomous element “captured” with a trap plasmid was a TIME derivative containing a predicted resolvase gene and a res site typical for many Tn3-family transposons. The identification of a portable site-specific recombination system is another intriguing example confirming the important role of non-autonomous TEs of the TIME family in shuffling genetic information in bacterial genomes. Transposition of such mosaic elements may have a significant impact on diversity and evolution, not only of transposons and plasmids, but also of other types of mobile genetic elements.

Response mechanisms of bacterial degraders to environmental contaminants on the level of cell walls and cytoplasmic membrane

Bacterial strains living in the environment must cope with the toxic compounds originating from humans production. Surface bacterial structures, cell wall and cytoplasmic membrane, surround each bacterial cell and create selective barriers between the cell interior and the outside world. They are a first site of contact between the cell and toxic compounds. Organic pollutants are able to penetrate into cytoplasmic membrane and affect membrane physiological functions. Bacteria had to evolve adaptation mechanisms to counteract the damage originated from toxic contaminants and to prevent their accumulation in cell. This review deals with various adaptation mechanisms of bacterial cell concerning primarily the changes in cytoplasmic membrane and cell wall. Cell adaptation maintains the membrane fluidity status and ratio between bilayer/nonbilayer phospholipids as well as the efflux of toxic compounds, protein repair mechanisms, and degradation of contaminants. Low energy consumption of cell adaptation is required to provide other physiological functions. Bacteria able to survive in toxic environment could help us to clean contaminated areas when they are used in bioremediation technologies.

Metabolic potential of the organic-solvent tolerant Pseudomonas putida DOT-T1E deduced from its annotated genome

Pseudomonas putida DOT-T1E is an organic solvent tolerant strain capable of degrading aromatic hydrocarbons. Here we report the DOT-T1E genomic sequence (6 394 153 bp) and its metabolic atlas based on the classification of enzyme activities. The genome encodes for at least 1751 enzymatic reactions that account for the known pattern of C, N, P and S utilization by this strain. Based on the potential of this strain to thrive in the presence of organic solvents and the subclasses of enzymes encoded in the genome, its metabolic map can be drawn and a number of potential biotransformation reactions can be deduced. This information may prove useful for adapting desired reactions to create value-added products. This bioengineering potential may be realized via direct transformation of substrates, or may require genetic engineering to block an existing pathway, or to re-organize operons and genes, as well as possibly requiring the recruitment of enzymes from other sources to achieve the desired transformation.

Funding Information Work in our laboratory was supported by Fondo Social Europeo and Fondos FEDER from the European Union, through several projects (BIO2010-17227, Consolider-Ingenio CSD2007-00005, Excelencia 2007 CVI-3010, Excelencia 2011 CVI-7391 and EXPLORA BIO2011-12776-E).

Transcriptional control of the main aromatic hydrocarbon efflux pump in Pseudomonas

Bacteria of the species Pseudomonas putida are ubiquitous soil inhabitants, and a few strains are able to thrive in the presence of extremely high concentrations of toxic solvents such as toluene and related aromatic hydrocarbons. Toluene tolerance is multifactorial in the sense that bacteria use a wide range of physiological and genetic changes to overcome solvent damage. This includes enhanced membrane impermeabilization through cis to trans isomerization of unsaturated fatty acids, activation of a stress response programme, and induction of efflux pumps that expulse toxic hydrocarbons to the outer medium. The most relevant element in this toluene tolerance arsenal is the TtgGHI efflux pump controlled by the TtgV regulator. We discuss here how TtgV controls expression of this efflux pump in response to solvents.

Engineering microbes for tolerance to next-generation biofuels

A major challenge when using microorganisms to produce bulk chemicals such as biofuels is that the production targets are often toxic to cells. Many biofuels are known to reduce cell viability through damage to the cell membrane and interference with essential physiological processes. Therefore, cells must trade off biofuel production and survival, reducing potential yields. Recently, there have been several efforts towards engineering strains for biofuel tolerance. Promising methods include engineering biofuel export systems, heat shock proteins, membrane modifications, more general stress responses, and approaches that integrate multiple tolerance strategies. In addition, in situ recovery methods and media supplements can help to ease the burden of end-product toxicity and may be used in combination with genetic approaches. Recent advances in systems and synthetic biology provide a framework for tolerance engineering. This review highlights recent targeted approaches towards improving microbial tolerance to next-generation biofuels with a particular emphasis on strategies that will improve production.

Engineering microbial biofuel tolerance and export using efflux pumps

Biofuels can be produced by microbes, but biofuel toxicity is a major obstacle to efficient production. Here, the authors identify efflux pumps that can effectively export biofuels, improving cell viability and increasing biofuel yields.

Many compounds being considered as candidates for advanced biofuels are toxic to microorganisms. This introduces an undesirable trade-off when engineering metabolic pathways for biofuel production because the engineered microbes must balance production against survival. Cellular export systems, such as efflux pumps, provide a direct mechanism for reducing biofuel toxicity. To identify novel biofuel pumps, we used bioinformatics to generate a list of all efflux pumps from sequenced bacterial genomes and prioritized a subset of targets for cloning. The resulting library of 43 pumps was heterologously expressed in Escherichia coli, where we tested it against seven representative biofuels. By using a competitive growth assay, we efficiently distinguished pumps that improved survival. For two of the fuels (n-butanol and isopentanol), none of the pumps improved tolerance. For all other fuels, we identified pumps that restored growth in the presence of biofuel. We then tested a beneficial pump directly in a production strain and demonstrated that it improved biofuel yields. Our findings introduce new tools for engineering production strains and utilize the increasingly large database of sequenced genomes.

Identification and characterization of the PhhR regulon in Pseudomonas putida

Pseudomonas putida is a soil microorganism that utilizes aromatic amino acids present in root exudates as a nitrogen source. We have previously shown that the PhhR transcriptional regulator induces phhAB genes encoding a phenylalanine hydroxylase. In this study we show, using microarray assays and promoter fusions, that PhhR is a global regulator responsible for the activation of genes essential for phenylalanine degradation, phenylalanine homeostasis and other genes of unknown function. Recently, it has been shown that phenylalanine catabolism occurs through more than one pathway. One of these possible pathways involves the metabolism of phenylalanine via tyrosine, p-hydroxyphenylpyruvate, and homogentisate. We identified two genes within this pathway that encode an acyl-CoA transferase involved in the metabolism of acetoacetate. All genes in this pathway were induced in response to phenylalanine in a PhhR-proficient background. The second potential degradative pathway involves the degradation of phenylalanine to produce phenylpyruvate, which seems to be degraded via phenylacetyl-CoA. A number of mutants in the paa genes encoding phenylacetyl-CoA degradation enzymes fail to grow on phenylpyruvate or phenylacetate, further supporting the existence of this second pathway. We found that the PhhR regulon also includes genes involved in the biosynthesis of aromatic amino acids that are repressed in the presence of phenylalanine, suggesting the possibility of feedback at the transcriptional level. In addition, we found that PhhR modulates the level of expression of the broad-substrate-specificity MexEF/OprN efflux pump. Expression from this pump is under the control of mexT gene product because phenylalanine-dependent transcription from the mexE promoter does not occur in a mexT mutant background. These results place PhhR as an important regulator in the control of bacterial responses to aromatic amino acids.

Effect of global transcriptional regulators related to carbohydrate metabolism on organic solvent tolerance in Escherichia coli

The effect of global transcriptional regulators related to carbohydrate metabolism on organic solvent tolerance (OST) in Escherichia coli has been investigated. The OSTs of the E. coli K-12 BW25113 knockout mutants acrA, acrB, cra, crp, cyaA, fnr, and mlc were investigated on the basis of colony forming efficiency on an agar plate overlaid with organic solvents. The knockout mutants of the cyclic AMP receptor protein (Deltacrp) and adenylate cyclase (DeltacyaA) were found to increase their OSTs. However, their OSTs decreased to the level of the wild-type strain when the DeltacyaA cells were grown in the presence of exogenous cyclic AMP. These results indicate that the formation of the cAMP-Crp complex is related to OST. The microbial-adhesion-to-hydrocarbon test on the Deltacrp and DeltacyaA mutants revealed that these mutants bound less abundantly to the organic solvent phase. In the Deltacrp and DeltacyaA mutants, the expression levels of GadB and NuoG increased to the level of the wild type. The OSTs of DeltagadB and DeltanuoG mutants decreased, suggesting that the expressions of these proteins are involved in the increased OST in the Deltacrp and DeltacyaA mutants.

Discovery of a modified transcription factor endowing yeasts with organic-solvent tolerance and reconstruction of an organic-solvent-tolerant Saccharomyces cerevisiae strain

Organic-solvent tolerance in Saccharomyces cerevisiae strain KK-211, which was first isolated as an organic-solvent-tolerant strain, depends on point mutation (R821S) of the transcription factor Pdr1p. The integration of the PDR1 R821S mutation into wild-type yeast results in organic-solvent tolerance, and the PDR1 R821S mutant can reduce carbonyl compounds in organic solvents.

Overexpression of prefoldin from the hyperthermophilic archaeum Pyrococcus horikoshii OT3 endowed Escherichia coli with organic solvent tolerance

Prefoldin is a jellyfish-shaped hexameric chaperone that captures a protein-folding intermediate and transfers it to the group II chaperonin for correct folding. In this work, we characterized the organic solvent tolerance of Escherichia coli cells that overexpress prefoldin and group II chaperonin from a hyperthermophilic archeaum, Pyrococcus horikoshii OT3. The colony-forming efficiency of E. coli cells overexpressing prefoldin increased by 1,000-fold and decreased the accumulation of intracellular organic solvent. The effect was impaired by deletions of the region responsible for the chaperone function of prefoldin. Therefore, we concluded that prefoldin endows E. coli cells by preventing accumulation of intracellular organic solvent through its molecular chaperone activity.

Carbon metabolism and product inhibition determine the epoxidation efficiency of solvent-tolerantPseudomonas sp. strain VLB120ΔC

Utilization of solvent tolerant bacteria as biocatalysts has been suggested to enable or improve bioprocesses for the production of toxic compounds. Here, we studied the relevance of solvent (product) tolerance and inhibition, carbon metabolism, and the stability of biocatalytic activity in such a bioprocess. Styrene degrading Pseudomonas sp. strain VLB120 is shown to be solvent tolerant and was engineered to produce enantiopure (S)-styrene oxide from styrene. Whereas glucose as sole source for carbon and energy allowed efficient styrene epoxidation at rates up to 97 micromol/min/(g cell dry weight), citrate was found to repress epoxidation by the engineered Pseudomonas sp. strain VLB120DeltaC emphasizing that carbon source selection and control is critical. In comparison to recombinant Escherichia coli, the VLB120DeltaC-strain tolerated higher toxic product levels but showed less stable activities during fed-batch cultivation in a two-liquid phase system. Epoxidation activities of the VLB120DeltaC-strain decreased at product concentrations above 130 mM in the organic phase. During continuous two-liquid phase cultivations at organic-phase product concentrations of up to 85 mM, the VLB120DeltaC-strain showed stable activities and, as compared to recombinant E. coli, a more efficient glucose metabolism resulting in a 22% higher volumetric productivity. Kinetic analyses indicated that activities were limited by the styrene concentration and not by other factors such as NADH availability or catabolite repression. In conclusion, the stability of activity of the solvent tolerant VLB120DeltaC-strain can be considered critical at elevated toxic product levels, whereas the efficient carbon and energy metabolism of this Pseudomonas strain augurs well for productive continuous processing.

Hierarchical binding of the TodT response regulator to its multiple recognition sites at the tod pathway operon promoter

The TodS and TodT proteins form a highly specific two-component regulatory system that controls the expression of genes involved in the degradation of toluene, benzene, and ethylbenzene via the toluene dioxygenase pathway. The catabolic genes of the toluene dioxygenase pathway are transcribed from a single promoter called P(todX) once the response regulator TodT is phosphorylated by the TodS sensor kinase in response to pathway substrates. We show here that TodT is a monomer in solution and that it binds to three specific sites in the P(todX) promoter, centered at -57, -85, and -106 with respect to the transcription start site. The -85 and -106 sites are pseudopalindromic, whereas the -57 site is half a palindrome. TodT binding to its target sites is sequential, as shown by electrophoresis mobility gel shift assays and footprinting. The binding affinity values of TodT, as determined by isothermal titration calorimetry, are 1.8+/-0.2, 5+/-0.4, and 6.3+/-0.8 microM for the -106, -85, and -57 sites, respectively, and the binding stoichiometry is one monomer per half-palindromic element. Mutational analysis revealed that all three sites contribute to P(todX) strength, although the most relevant site is the distal one with respect to the -10 extended element of the downstream promoter element. The C-TodT [C-terminal TodT fragment (amino acids 154-206)], a truncated variant of TodT that contains the C-terminal half of the protein bearing the DNA binding domain, binds in vitro to all three sites with affinity similar to that of the full-length protein. However, C-TodT, in contrast to the full-length regulator, does not activate in vitro transcription from P(todX). We discuss the consequences of the organization of the binding sites on transcriptional control and propose that the N-terminal domain of TodT is necessary for appropriate interactions with other transcriptional elements.

The ttgGHI solvent efflux pump operon of Pseudomonas putida DOT-T1E is located on a large self-transmissible plasmid

Pseudomonas putida DOT-T1E is a solvent-tolerant strain able to grow in the presence of > 1% (v/v) toluene in the culture medium. A set of multidrug efflux pumps have been found to play a major role in the tolerance of this bacterium to organic solvents (Rojas et al., J Bacteriol 183: 3967-3973). In the course of studies of the mechanisms underlying solvent tolerance in DOT-T1E, we isolated a spontaneous solvent-sensitive mutant derivative which had lost the genes encoding the TtgGHI efflux pump, the most important extrusion element in quantitative terms. Genomic comparisons between the mutant and its parental strain by microarray analysis revealed that in addition to the ttgVW-ttgGHI gene cluster, another group of genes, highly similar to those found in the Tn4653A and ISPpu12 transposable elements of the TOL plasmid pWW0 from P. putida mt-2, were also absent from this strain. Further analysis demonstrated that strain DOT-T1E harboured a large plasmid (named pGRT1) that was lost from the solvent-sensitive mutant. Mapping analysis revealed that the ttgVW-ttgGHI genes and the Tn4653A-like transposon are borne by the pGRT1 plasmid. Plasmid pGRT1 is highly stable and its frequency of loss is below 10(-8) per cell per generation under a variety of growth conditions, including nutritional and physical stresses. The pGRT1 plasmid is self-transmissible, and its acquisition by the toluene-sensitive P. putida KT2440 and Pseudomonas aeruginosa PAO1 increased the recipient's tolerance to toluene up to levels similar to those exhibited by P. putida DOT-T1E. We discuss the importance and potential benefits of this plasmid for the development of bacteria with enhanced solvent tolerance, and its potential impact for bioremediation and whole-cell biotransformations.

Increase of organic solvent tolerance by overexpression of manXYZ in Escherichia coli

Transcriptional analysis has been investigated to detect the genes involved in organic solvent tolerance. A time course of gene expression profiles of Escherichia coli after exposure to organic solvents revealed that the expression levels of manX, manY, and manZ genes were strongly upregulated by 13.2-, 10.0-, and 7.0-folds, respectively, after 2 min and then decreased after 10 min. Organic solvent tolerance of E. coli was investigated by inducing overexpression of manX, manY, and manZ genes and manXYZ operon that encode a sugar transporter of the phosphotransferase system. Although the expression of manX, manY, and manZ alone was not effective, the organic solvent tolerance level was increased by the expression of manXYZ. The intracellular hexane level was kept lower in E. coli cells overexpressing manXYZ after 4 h of incubation with hexane.

Biotransformation in double-phase systems: physiological responses of Pseudomonas putida DOT-T1E to a double phase made of aliphatic alcohols and biosynthesis of substituted catechols

Pseudomonas putida strain DOT-T1E is highly tolerant to organic solvents, with a logP(ow) (the logarithm of the partition coefficient of a solvent in a two-phase water-octanol system of > or =2.5. Solvent tolerant microorganisms can be exploited to develop double-phase (organic solvent and water) biotransformation systems in which toxic substrates or products are kept in the organic phase. We tested P. putida DOT-T1E tolerance to different aliphatic alcohols with a logP(ow) value between 2 and 4, such as decanol, nonanol, and octanol, which are potentially useful in biotransformations in double-phase systems in which compounds with a logP(ow) around 1.5 are produced. P. putida DOT-T1E responds to aliphatic alcohols as the second phase through cis-to-trans isomerization of unsaturated cis fatty acids and through efflux of these aliphatic alcohols via a series of pumps that also extrude aromatic hydrocarbons. These defense mechanisms allow P. putida DOT-T1E to survive well in the presence of high concentrations of the aliphatic alcohols, and growth with nonanol or decanol occurred at a high rate, whereas in the presence of an octanol double-phase growth was compromised. Our results support that the logP(ow) of aliphatic alcohols correlates with their toxic effects, as octanol (logP(ow) = 2.9) has more negative effects in P. putida cells than 1-nonanol (logP(ow) = 3.4) or 1-decanol (logP(ow) = 4). A P. putida DOT-T1E derivative bearing plasmid pWW0-xylE::Km transforms m-xylene (logP(ow) = 3.2) into 3-methylcatechol (logP(ow) = 1.8). The amount of 3-methylcatechol produced in an aliphatic alcohol/water bioreactor was 10- to 20-fold higher than in an aqueous medium, demonstrating the usefulness of double-phase systems for this particular biotransformation.