Biochemical characterization of engineered amylopullulanase from Thermoanaerobacter ethanolicus 39E-implicating the non-necessity of its 100 C-terminal amino acid residues

The crystal structure of GH57 family amylopullulanase reveals its dual binding pockets sharing the same catalytic dyad

Glycoside Hydrolase Family 57 (GH57) amylopullulanase is a thermophilic endoamylase capable of hydrolyzing both α-1,4 and α-1,6-glycosidic bonds, demonstrating significant potential for one-step starch saccharification in industrial applications. However, the mechanisms underlying the dual catalytic activities of GH57 family amylopullulanase remain poorly understood. In this study, we report the first crystal structures of a GH57 amylopullulanase from Aquifex aeolicus (AaApu) in complex with oligosaccharides containing both α-1,4 and α-1,6 glycosidic bonds. Our structural analysis reveals that GH57 amylopullulanase features dual binding pockets arranged in a "Y"-shaped configuration, which accommodates branched-chain starches. The dual binding pockets share a common catalytic dyad composed of Glu256 and Asp352. Notably, unlike the typical retaining mechanism observed in many glycoside hydrolases, the distance between the catalytic residues in GH57 amylopullulanase is significantly larger (approximately 7 Å). This study provides critical insights into the structural basis of GH57 amylopullulanase activity and offers a foundation for the rational engineering of these enzymes for industrial applications.

Expression optimization and characterization of a novel amylopullulanase from the thermophilic Cohnella sp. A01

Amylopullulanase (EC. 3.2.1.41/1) is an enzyme that hydrolyzes starch and pullulan, capable of breaking (4 → 1)-α and (6 → 1)-α bonds in starch. Here, the Amy1136 gene (2166 base pairs) from the thermophilic bacterium Cohnella sp. A01 was cloned into the expression vector pET-26b(+) and expressed in Escherichia coli BL21. The enzyme was purified using heat shock at 90 °C for 15 min. The expression optimization of Amy1136 was performed using Plackett-Burman and Box-Behnken design as follows: temperature of 26.7 °C, rotational speed of 180 rpm, and bacterial population of 1.25. The Amy1136 displayed the highest activity at a temperature of 50 °C (on pullulan) and a pH of 8.0 (on starch) and, also exhibited stability at high temperatures (90 °C) and over a range of pH values. Ag+ significantly increased enzyme activity, while Co2+ completely inhibited amylase activity. The enzyme was found to be calcium-independent. The kinetic parameters Km, Vmax, kcat, and kcat/Km for amylase activity were 2.4 mg/mL, 38.650 μmol min-1 mg-1, 38.1129 S-1, and 0.09269 S-1mg mL-1, respectively, and for pullulanase activity were 173.1 mg/mL, 59.337 μmol min-1 mg-1, 1.586 S-1, and 1.78338 S-1mg mL-1, respectively. The thermodynamic parameters Kin, t1/2, Ea#, ΔH#, ΔG# and ΔS# were calculated equal to 0.20 × 10-2 (m-1), 462.09 (min), 16.87 (kJ/mol), 14.18 (kJ/mol), 47.34 (kJ/mol) and 102.60 (Jmol K-1), respectively. The stability of Amy1136 under high temperature, acidic and alkaline pH, surfactants, organic solvents, and calcium independence, suggests its suitability for industrial applications.

Molecular Cloning, Characterization, and Application of a Novel Multifunctional Isoamylase (MIsA) from Myxococcus sp. Strain V11

A novel multifunctional isoamylase, MIsA from Myxococcus sp. strain V11, was expressed in Escherichia coli BL21(DE3). Sequence alignment revealed that MIsA is a typical isoamylase that belongs to glycoside hydrolase family 13 (GH 13). MIsA can hydrolyze the α-1,6-branches of amylopectin and pullulan, as well as the α-1,4-glucosidic bond in amylose. Additionally, MIsA demonstrates 4-α-D-glucan transferase activity, enabling the transfer of α-1,4-glucan oligosaccharides between molecules, particularly with linear maltooligosaccharides. The Km, Kcat, and Vmax values of the MIsA for amylopectin were 1.22 mM, 40.42 µmol·min-1·mg-1, and 4046.31 mM·min-1. The yields of amylopectin and amylose hydrolyzed into oligosaccharides were 10.16% and 11.70%, respectively. The hydrolysis efficiencies were 55%, 35%, and 30% for amylopectin, soluble starch, and amylose, respectively. In the composite enzyme hydrolysis of amylose, the yield of maltotetraose increased by 1.81-fold and 2.73-fold compared with that of MIsA and MTHase (MCK8499120) alone, respectively.

Cloning and characterization of thermostable amylopullulanase TbbApu and its C-terminal truncated variants with enhanced activity in organic solvents

Bifunctional debranching-enzyme amylopullulanases belong to the glycoside hydrolases (GHs) family and catalyze both the hydrolysis of α-1,4 and α-1,6 glycosidic bonds in starch, pullulan, amylopectin and glycogen polysaccharides. Among these, especially thermostable ones are essential in starch processing applications. In this study, we focused to elucidate the complete sequence of the apu gene and the role of C-term domains on biochemical properties and enzyme activity of Thermoanaerobacter brockii brockii amylopullulanase (TbbApu). After the gene sequence was defined, C- term truncated variants were constructed. The most suitable host organism and expression vector were determined as E. coli BL21(DE3) and pET-28a(+) depending on the highest yield/biomass ratio for recombinant production of all constructs. It was seen that the expression yield increased approximately threefold in the case of the SH3 region truncation. In the biochemical characterization, TbbApu and its truncated variants exhibited maximum activity at 70 °C and 75 °C for pullulan and starch hydrolysis respectively, and the optimum pH of TbbApu were 6.5 and 6 for truncated variants. Moreover, hydrolysis activities of all recombinant enzymes were enhanced by Mn²⁺, Co²⁺ and Cu²⁺, detergents, and almost all organic solvents; except butanol, DMF and DMSO. All recombinant amylopullulanases remained 80% stable up to 80 °C in the wide range of pH and also retained > 85% stability in the presence of defined volatile organic solvents. No significant difference was observed between the raw starch adsorption capacity and the specific activity of the three variants. These results indicated that the C-terminal regions of TbbApu are non-essential for the enzyme activity, stability and substrate binding capacity; furthermore, hexane and acetone organic solvents enhanced both pullulanase and α-amylase activity of these enzymes, interestingly. With these features, TbbApu and its truncated variants are distinguished from other thermophilic amylopullulanases and also make them promising candidates for industrial use.

Improved Stability and Hydrolysates of Hyperthermophilic GH57 Type II Pullulanase from the Deep-Sea Archaeon Thermococcus siculi HJ21 by Truncation

Pullulanase (EC 3.2.1.41) belongs to the amylase family and is often used alone or in combination with other amylases in the industrial production of starch-based products. This enzyme is often required in industrial production because of its better stability. We here truncated the pullulanase gene from the deep-sea hydrothermal anaerobic archaeon Thermococcus siculi HJ21 and obtained Pul-HJΔ782, which is a member of the α-amylase family GH57. The results revealed that the optimum temperature for Pul-HJΔ782 was 100 °C, and its thermostability at 100 °C improved after truncation. Less than 15% of its enzyme activity was lost after 1 h of incubation at 100 °C, and 57% activity remained after 5 h of treatment. Truncation significantly improved the overall pH tolerance range of Pul-HJΔ782, and its stability in the pH range 4–8 was over 80% relative activity from an average of 60%. The sequence and structural model of Pul-HJΔ782 was analyzed, and its instability index was reduced significantly. Furthermore, the hydrolysates of the truncated and wild-type pullulanase were analyzed, and the enzymatic digestion efficiency of the truncated Pul-HJΔ782 was higher.

A Bibliometric Analysis and Review of Pullulan-Degrading Enzymes—Past and Current Trends

Starch and pullulan degrading enzymes are essential industrial biocatalysts. Pullulan-degrading enzymes are grouped into pullulanases (types I and type II) and pullulan hydrolase (types I, II and III). Generally, these enzymes hydrolyse the α-1,6 glucosidic bonds (and α-1,4 for certain enzyme groups) of substrates and form reducing sugars such as glucose, maltose, maltotriose, panose or isopanose. This review covers two main aspects: (i) bibliometric analysis of publications and patents related to pullulan-degrading enzymes and (ii) biological aspects of free and immobilised pullulan-degrading enzymes and protein engineering. The collective data suggest that most publications involved researchers within the same institution or country in the past and current practice. Multi-national interaction shall be improved, especially in tapping the enzymes from unculturable prokaryotes. While the understanding of pullulanases may reach a certain extend of saturation, the discovery of pullulan hydrolases is still limited. In this report, we suggest readers consider using the next-generation sequencing technique to fill the gaps of finding more new sequences encoding pullulan-degrading enzymes to expand the knowledge body of this topic.

Microbial starch debranching enzymes: Developments and applications

Starch debranching enzymes (SDBEs) hydrolyze the α-1,6 glycosidic bonds in polysaccharides such as starch, amylopectin, pullulan and glycogen. SDBEs are also important enzymes for the preparation of sugar syrup, resistant starch and cyclodextrin. As the synergistic catalysis of SDBEs and other starch-acting hydrolases can effectively improve the raw material utilization and production efficiency during starch processing steps such as saccharification and modification, they have attracted substantial research interest in the past decades. The substrate specificities of the two major members of SDBEs, pullulanases and isoamylases, are quite different. Pullulanases generally require at least two α-1,4 linked glucose units existing on both sugar chains linked by the α-1,6 bond, while isoamylases require at least three units of α-1,4 linked glucose. SDBEs mainly belong to glycoside hydrolase (GH) family 13 and 57. Except for GH57 type II pullulanse, GH13 pullulanases and isoamylases share plenty of similarities in sequence and structure of the core catalytic domains. However, the N-terminal domains, which might be one of the determinants contributing to the substrate binding of SDBEs, are distinct in different enzymes. In order to overcome the current defects of SDBEs in catalytic efficiency, thermostability and expression level, great efforts have been made to develop effective enzyme engineering and fermentation strategies. Herein, the diverse biochemical properties and distinct features in the sequence and structure of pullulanase and isoamylase from different sources are summarized. Up-to-date developments in the enzyme engineering, heterologous production and industrial applications of SDBEs is also reviewed. Finally, research perspective which could help understanding and broadening the applications of SDBEs are provided.

Functional study of C-terminal domain of the thermoacidophilic raw starch-hydrolyzing α-amylase Gt-amy

Since the thermoacidophilic raw-starch hydrolyzing α-amylase Gt-amy can effectively hydrolyze corn starch under starch liquefaction conditions, it has potential for many industrial applications. To identify the raw starch-binding domain of Gt-amy, a C-terminal domain (CTD)-truncated mutant (Gt-amy-T) was constructed, and its enzymatic properties were compared with Gt-amy. In comparison to CTD of Gt-amy, which could effectively bind corn starch, the Gt-amy-T could not bind to and hydrolyze corn starch under similar conditions. In addition, Gt-amy-T showed significantly lower thermal activity and thermal stability. Using soluble starch as the substrate, the k _cat of Gt-amy-T at 80 °C was approximately 77.9% of that of Gt-amy. The half-life of Gt-amy at 80 °C was 3 h, while that of Gt-amy-T was 2 h. These results reveal that the CTD plays a vital role in raw starch binding and degradation by Gt-amy and helps Gt-amy maintain thermal activity and stability.

Advances and challenges in the production of extracellular thermoduric pullulanases by wild-type and recombinant microorganisms: a review

Thermoduric pullulanases, acting as starch-debranching enzymes, are required in many industrial applications, mainly in the production of concentrated glucose, maltose, and fructose syrups. To date, however, a single pullulanase, from Bacillus acidopullulyticus, is available on the market for industrial purposes. This review is an investigation of the major advances as well as the major challenges being faced with regard to optimization of the production of extracellular thermoduric pullulanases either by their original hosts or by recombinant organisms. The critical aspects linked to industrial pullulanase production, which should always be considered, are emphasized, including those parameters influencing solubility, thermostability, and catalytic efficiency of the enzyme. This review provides new insights for improving the production of extracellular thermoduric pullulanases in the hope that such information may facilitate their commercial utilization and potentially be applied to the development of other industrially relevant enzymes.

Extensive hydrolysis of raw rice starch by a chimeric α-amylase engineered with α-amylase (AmyP) and a starch-binding domain from Cryptococcus sp. S-2

Recombinant chimeric α-amylase (AmyP-Cr) was constructed by a catalytic core of α-amylase (AmyP) from a marine metagenomic library and a starch-binding domain (SBD_Cr) of α-amylase from Cryptococcus sp. S-2. The molecular fusion did not alter optimum pH, optimum temperature, hydrolysis products, and an ability of preferential and rapid degradation towards raw rice starch, but catalytic efficiency and thermostability were remarkably improved compared with those of the wild-type AmyP. AmyP-Cr achieved the final hydrolysis degree of 61.7 ± 1.2% for 10% raw rice starch and 47.3 ± 0.8% for 15% raw rice starch after 4 h at 40 °C with 1.0 U per mg of raw starch. The catalytic efficiency was very high, with 3.6-4.0 times higher than that of AmyP. The enhanced catalytic efficiency was attributed to the better thermostability and the higher adsorption and disruption to raw rice starch caused by SBD_Cr. The properties of AmyP-Cr open a new way in terms of a new design of raw rice starch processing.

Expression and comparative characterization of complete and C-terminally truncated forms of saccharifying α-amylase from Lactobacillus plantarum S21

Lactobacillus plantarum S21 α-amylase possesses 475 amino acids at the C-terminal region identified as the starch-binding domain (SBD) and has been previously reported to play a role in raw starch degradation. To understand the specific roles of this SBD, cloning and expression of the complete (AmyL9) and C-terminally truncated (AmyL9Δ_SBD) forms of α-amylase were conducted for enzyme purification and comparative characterization. AmyL9 and AmyL9Δ_SBD were overproduced in Escherichia coli at approximately 10- and 20-times increased values of volumetric productivity when compared to α-amylase produced by the wild type, respectively. AmyL9Δ_SBD was unable to hydrolyze raw starch and exhibited substrate specificity in a similar manner to that of AmyL9, but it was weakly active toward amylopectin and glycogen. The hydrolysis products obtained from the amylaceous substrates of both enzymes were the same. In addition, AmyL9Δ_SBD showed comparatively higher K_m values than AmyL9 when it reacted with starch and amylopectin, and lower values for other kinetic constants namely v_max, k_cat, and k_cat/K_m. The results indicated that the C-terminal SBDs of L. plantarum S21 α-amylase contribute to not only substrate preference but also substrate affinity and the catalytic efficiency of the α-amylase without any changes in the degradation mechanisms of the enzyme.

Cohnella amylopullulanases: Biochemical characterization of two recombinant thermophilic enzymes

Some industries require newer, more efficient recombinant enzymes to accelerate their ongoing biochemical reactions in harsh environments with less replenishment. Thus, the search for native enzymes from extremophiles that are suitable for use under industrial conditions is a permanent challenge for R & D departments. Here and toward such discoveries, two sequences homologous to amylopullulanases (EC 3.2.1.41, GH57) from an endogenous Cohnella sp., [Coh00831 (KP335161; 1998 bp) and Coh01133 (KP335160: 3678 bp)] were identified. The genes were heterologously expressed in E. coli to both determine their type and further characterize their properties. The isolated DNA was PCR amplified with gene specific primers and cloned in pET28a, and the recombinant proteins were expressed in E. coli BL21 (DE3). The temperatures and pH optima of purified recombinants Coh 01133 and Coh 00831 enzymes were 70°C and 8, and 60°C and 6, respectively. These enzymes are stable more than 90% in 60°C and 50°C for 90 min respectively. The major reactions released sugars which could be fractionated by HPLC analysis, from soluble starch were mainly maltose (G2), maltotriose (G3) and maltotetraose (G4). The enzymes hydrolyzed pullulan to maltotriose (G3) only. Enzyme activities for both proteins were improved in the availability of Mn²⁺, Ba²⁺, Ca²⁺, and Mg²⁺ and reduced in the presence of Fe²⁺, Li²⁺, Na²⁺, Triton X100 and urea. Moreover, Co²⁺, K⁺, and Cu²⁺ had a negative effect only on Coh 01133 enzyme.

The evolutionary origin and possible functional roles of FNIII domains in two Microbacterium aurum B8.A granular starch degrading enzymes, and in other carbohydrate acting enzymes

Fibronectin type III (FNIII) domains were first identified in the eukaryotic plasma protein fibronectin, where they act as structural spacers or enable protein-protein interactions. Recently we characterized two large and multi-domain amylases in Microbacterium aurum B8.A that both carry multiple FNIII and carbohydrate binding modules (CBMs). The role of (multiple) FNIII domains in such carbohydrate acting enzymes is currently unclear. Four hypothetical functions are considered here: a substrate surface disruption domain, a carbohydrate binding module, as a stable linker, or enabling protein-protein interactions. We performed a phylogenetic analysis of all FNIII domains identified in proteins listed in the CAZy database. These data clearly show that the FNIII domains in eukaryotic and archaeal CAZy proteins are of bacterial origin and also provides examples of interkingdom gene transfer from Bacteria to Archaea and Eucarya. FNIII domains occur in a wide variety of CAZy enzymes acting on many different substrates, suggesting that they have a non-specific role in these proteins. While CBM domains are mostly found at protein termini, FNIII domains are commonly located between other protein domains. FNIII domains in carbohydrate acting enzymes thus may function mainly as stable linkers to allow optimal positioning and/or flexibility of the catalytic domain and other domains, such as CBM.

Structure of a Thermobifida fusca lytic polysaccharide monooxygenase and mutagenesis of key residues

BACKGROUND

Auxiliary activity (AA) enzymes are produced by numerous bacterial and fungal species to assist in the degradation of biomass. These enzymes are abundant but have yet to be fully characterized. Here, we report the X-ray structure of Thermobifida fusca AA10A (TfAA10A), investigate mutational characterization of key surface residues near its active site, and explore the importance of the various domains of Thermobifida fusca AA10B (TfAA10B). The structure of TfAA10A is similar to other bacterial LPMOs (lytic polysaccharide monooxygenases), including signs of photo-reduction and a distorted active site, with mixed features showing both type I and II copper coordination. The point mutation experiments of TfAA10A show that Trp82 and Asn83 are needed for binding, but only Trp82 affects activity. The TfAA10B domain truncation mutants reveal that CBM2 is crucial for the binding of substrate, but that the X1 module does not affect binding or activity.

RESULTS

In TfAA10A, Trp82 and Asn83 are needed for binding, but only Trp82 affects activity. The TfAA10B domain truncation mutants reveal that CBM2 is crucial for substrate binding, but that the X1 module does not affect binding or activity. The structure of TfAA10A is similar to other bacterial lytic polysaccharide monooxygenases with mixed features showing both type I and II copper coordination.

CONCLUSIONS

The role of LPMOs and the variability of abundance in genomes are not fully explored. LPMOs likely perform initial attacks into crystalline cellulose to allow larger processive cellulases to bind and attack, but the precise nature of their synergistic behavior remains to be definitively characterized.

Characterization of the starch-acting MaAmyB enzyme from Microbacterium aurum B8.A representing the novel subfamily GH13_42 with an unusual, multi-domain organization

The bacterium Microbacterium aurum strain B8.A degrades granular starches, using the multi-domain MaAmyA α-amylase to initiate granule degradation through pore formation. This paper reports the characterization of the M. aurum B8.A MaAmyB enzyme, a second starch-acting enzyme with multiple FNIII and CBM25 domains. MaAmyB was characterized as an α-glucan 1,4-α-maltohexaosidase with the ability to subsequently hydrolyze maltohexaose to maltose through the release of glucose. MaAmyB also displays exo-activity with a double blocked PNPG7 substrate, releasing PNP. In M. aurum B8.A, MaAmyB may contribute to degradation of starch granules by rapidly hydrolyzing the helical and linear starch chains that become exposed after pore formation by MaAmyA. Bioinformatics analysis showed that MaAmyB represents a novel GH13 subfamily, designated GH13_42, currently with 165 members, all in Gram-positive soil dwelling bacteria, mostly Streptomyces. All members have an unusually large catalytic domain (AB-regions), due to three insertions compared to established α-amylases, and an aberrant C-region, which has only 30% identity to established GH13 C-regions. Most GH13_42 members have three N-terminal domains (2 CBM25 and 1 FNIII). This is unusual as starch binding domains are commonly found at the C-termini of α-amylases. The evolution of the multi-domain M. aurum B8.A MaAmyA and MaAmyB enzymes is discussed.

Degradation of Granular Starch by the Bacterium Microbacterium aurum Strain B8.A Involves a Modular α-Amylase Enzyme System with FNIII and CBM25 Domains

The bacterium Microbacterium aurum strain B8.A, originally isolated from a potato plant wastewater facility, is able to degrade different types of starch granules. Here we report the characterization of an unusually large, multidomain M. aurum B8.A α-amylase enzyme (MaAmyA). MaAmyA is a 1,417-amino-acid (aa) protein with a predicted molecular mass of 148 kDa. Sequence analysis of MaAmyA showed that its catalytic core is a family GH13_32 α-amylase with the typical ABC domain structure, followed by a fibronectin (FNIII) domain, two carbohydrate binding modules (CBM25), and another three FNIII domains. Recombinant expression and purification yielded an enzyme with the ability to degrade wheat and potato starch granules by introducing pores. Characterization of various truncated mutants of MaAmyA revealed a direct relationship between the presence of CBM25 domains and the ability of MaAmyA to form pores in starch granules, while the FNIII domains most likely function as stable linkers. At the C terminus, MaAmyA carries a 300-aa domain which is uniquely associated with large multidomain amylases; its function remains to be elucidated. We concluded that M. aurum B8.A employs a multidomain enzyme system to initiate degradation of starch granules via pore formation.

Exploration of extremophiles for high temperature biotechnological processes

Industrial processes often take place under harsh conditions that are hostile to microorganisms and their biocatalysts. Microorganisms surviving at temperatures above 60°C represent a chest of biotechnological treasures for high-temperature bioprocesses by producing a large portfolio of biocatalysts (thermozymes). Due to the unique requirements to cultivate thermophilic (60-80°C) and hyperthermophilic (80-110°C) Bacteria and Archaea, less than 5% are cultivable in the laboratory. Therefore, other approaches including sequence-based screenings and metagenomics have been successful in providing novel thermozymes. In particular, polysaccharide-degrading enzymes (amylolytic enzymes, hemicellulases, cellulases, pectinases and chitinases), lipolytic enzymes and proteases from thermophiles have attracted interest due to their potential for versatile applications in pharmaceutical, chemical, food, textile, paper, leather and feed industries as well as in biorefineries.

Ectopic expression of bacterial amylopullulanase enhances bioethanol production from maize grain

Heterologous expression of amylopullulanase in maize seeds leads to partial starch degradation into fermentable sugars, which enhances direct bioethanol production from maize grain. Utilization of maize in bioethanol industry in the United States reached ±13.3 billion gallons in 2012, most of which was derived from maize grain. Starch hydrolysis for bioethanol industry requires the addition of thermostable alpha amylase and amyloglucosidase (AMG) enzymes to break down the α-1,4 and α-1,6 glucosidic bonds of starch that limits the cost effectiveness of the process on an industrial scale due to its high cost. Transgenic plants expressing a thermostable starch-degrading enzyme can overcome this problem by omitting the addition of exogenous enzymes during the starch hydrolysis process. In this study, we generated transgenic maize plants expressing an amylopullulanase (APU) enzyme from the bacterium Thermoanaerobacter thermohydrosulfuricus. A truncated version of the dual functional APU (TrAPU) that possesses both alpha amylase and pullulanase activities was produced in maize endosperm tissue using a seed-specific promoter of 27-kD gamma zein. A number of analyses were performed at 85 °C, a temperature typically used for starch processing. Firstly, enzymatic assay and thin layer chromatography analysis showed direct starch hydrolysis into glucose. In addition, scanning electron microscopy illustrated porous and broken granules, suggesting starch autohydrolysis. Finally, bioethanol assay demonstrated that a 40.2 ± 2.63 % (14.7 ± 0.90 g ethanol per 100 g seed) maize starch to ethanol conversion was achieved from the TrAPU seeds. Conversion efficiency was improved to reach 90.5 % (33.1 ± 0.66 g ethanol per 100 g seed) when commercial amyloglucosidase was added after direct hydrolysis of TrAPU maize seeds. Our results provide evidence that enzymes for starch hydrolysis can be produced in maize seeds to enhance bioethanol production.

Maltose-forming α-amylase from the hyperthermophilic archaeon Pyrococcus sp. ST04

The deduced amino acid sequence from a gene of the hyperthermophilic archaeon Pyrococcus sp. ST04 (Py04_0872) contained a conserved glycoside hydrolase family 57 (GH57) motif, but showed <13% sequence identity with other known Pyrococcus GH57 enzymes, such as 4-α-glucanotransferase (EC 2.4.1.25), amylopullulanase (EC 3.2.1.41), and branching enzyme (EC 2.4.1.18). This gene was cloned and expressed in Escherichia coli, and the recombinant product (Pyrococcus sp. ST04 maltose-forming α-amylase, PSMA) was a novel 70-kDa maltose-forming α-amylase. PSMA only recognized maltose (G2) units with α-1,4 and α-1,6 linkages in polysaccharides (e.g., starch, amylopectin, and glycogen) and hydrolyzed pullulan very poorly. G2 was the primary end product of hydrolysis. Branched cyclodextrin (CD) was only hydrolyzed along its branched maltooligosaccharides. 6-O-glucosyl-β-cyclodextrin (G1-β-CD) and β-cyclodextrin (β-CD) were resistant to PSMA suggesting that PSMA is an exo-type glucan hydrolase with α-1,4- and α-1,6-glucan hydrolytic activities. The half-saturation value (Km) for the α-1,4 linkage of maltotriose (G3) was 8.4 mM while that of the α-1,6 linkage of 6-O-maltosyl-β-cyclodextrin (G2-β-CD) was 0.3 mM. The kcat values were 381.0 min(-1) for G3 and 1,545.0 min(-1) for G2-β-CD. The enzyme was inhibited competitively by the reaction product G2, and the Ki constant was 0.7 mM. PSMA bridges the gap between amylases that hydrolyze larger maltodextrins and α-glucosidase that feeds G2 into glycolysis by hydrolyzing smaller glucans into G2 units.

A high molecular-mass Anoxybacillus sp. SK3-4 amylopullulanase: characterization and its relationship in carbohydrate utilization

An amylopullulanase of the thermophilic Anoxybacillus sp. SK3-4 (ApuASK) was purified to homogeneity and characterized. Though amylopullulanases larger than 200 kDa are rare, the molecular mass of purified ApuASK appears to be approximately 225 kDa, on both SDS-PAGE analyses and native-PAGE analyses. ApuASK was stable between pH 6.0 and pH 8.0 and exhibited optimal activity at pH 7.5. The optimal temperature for ApuASK enzyme activity was 60 °C, and it retained 54% of its total activity for 240 min at 65 °C. ApuASK reacts with pullulan, starch, glycogen, and dextrin, yielding glucose, maltose, and maltotriose. Interestingly, most of the previously described amylopullulanases are unable to produce glucose and maltose from these substrates. Thus, ApuASK is a novel, high molecular-mass amylopullulanase able to produce glucose, maltose, and maltotriose from pullulan and starch. Based on whole genome sequencing data, ApuASK appeared to be the largest protein present in Anoxybacillus sp. SK3-4. The α-amylase catalytic domain present in all of the amylase superfamily members is present in ApuASK, located between the cyclodextrin (CD)-pullulan-degrading N-terminus and the α-amylase catalytic C-terminus (amyC) domains. In addition, the existence of a S-layer homology (SLH) domain indicates that ApuASK might function as a cell-anchoring enzyme and be important for carbohydrate utilization in a streaming hot spring.

Recombinant bacterial amylopullulanases: developments and perspectives

Pullulanases are endo-acting enzymes capable of hydrolyzing α-1, 6-glycosidic linkages in starch, pullulan, amylopectin, and related oligosaccharides, while amylopullulanases are bifunctional enzymes with an active site capable of cleaving both α-1, 4 and α-1, 6 linkages in starch, amylose and other oligosaccharides, and α-1, 6 linkages in pullulan. The amylopullulanases are classified in GH13 and GH57 family enzymes based on the architecture of catalytic domain and number of conserved sequences. The enzymes with two active sites, one for the hydrolysis of α-1, 4- glycosidic bond and the other for α-1, 6-glycosidic bond, are called α-amylase-pullulanases, while amylopullulanases have only one active site for cleaving both α-1, 4- and α-1, 6-glycosidic bonds. The amylopullulanases produced by bacteria find applications in the starch and baking industries as a catalyst for one step starch liquefaction-saccharification for making various sugar syrups, as antistaling agent in bread and as a detergent additive.

Effect of carboxymethyl groups on degradation of modified pullulan by pullulanase from Klebsiella pneumoniae

Pullulanase is an enzyme that hydrolyses the α-1,6 linkages of pullulan (Pull) to produce maltotriose units. We studied the capacity of pullulanase to cleave its modified substrate: carboxymethylpullulan (CMPull), synthesized with two different degrees of substitution (DS=0.16 and 0.8). Size exclusion chromatography with on line multi angle light scattering and differential refractive index detection (SEC/MALS/DRI) was used to estimate both number and weight average molar masses, respectively, Mn and Mw, of pullulan and CMPulls together with the percentage of maltotriose formed during hydrolysis. Determination of reduced sugars gave also a Mn that is compared to data obtained by SEC. It revealed that CMPull is partially degraded by pullulanase and the rate of hydrolysis decreased with increased DS. At the end of the hydrolysis, Mn is decreased by a factor of 23 and 1.7 for CMPull with a DS of 0.16 and 0.8 respectively. The percentage of produced maltotriose decreased also when increasing DS (24% and 7% for CMPull DS 0.16 and 0.8 respectively). The kinetic properties of pullulanase were also investigated with Pull and CMPulls by isothermal titration calorimetry (ITC) using simple injection method. Based on Michaelis-Menten kinetics, Vmax (maximal velocity) decreased and KM (Michaelis constant) increased when DS of modified pullulan CMPull increased.

Effect of C-terminal truncation on enzyme properties of recombinant amylopullulanase from Thermoanaerobacter pseudoethanolicus

The smallest and enzymatically active molecule, TetApuQ818, was localized within the C-terminal Q818 amino acid residue after serial C-terminal truncation analysis of the recombinant amylopullulanase molecule (TetApuM955) from Thermoanaerobacter pseudoethanolicus. Kinetic analyses indicated that the overall catalytic efficiency, k (cat)/K (m), of TetApuQ818 was 8-32% decreased for the pullulan and the soluble starch substrate, respectively. Changes to the substrate affinity, K (m), and the turnover rate, k (cat), were decreased significantly in both enzymatic activities of TetApuQ818. TetApuQ818 exhibited less thermostability than TetApuM955 when the temperature was raised above 85°C, but it had similar substrate-binding ability and hydrolysis products toward various substrates as TetApuM955 did. Both enzymes showed similar spectroscopies of fluorescence and circular dichroism, suggesting the active folding conformation was maintained after this C-terminal Q818 deletion. This study suggested that the binding ability of insoluble starch by TetApuM955 did not rely on the putative C-terminal carbohydrate binding module family 20 (CBM20) and two FnIII regions of TetApu, though the integrity of the AamyC module of TetApuQ818 was required for the enzyme activity.

Biochemical characterization of two truncated forms of amylopullulanase from Thermoanaerobacterium saccharolyticum NTOU1 to identify its enzymatically active region

The enzymatically active region of amylopullulanase from Thermoanaerobacterium saccharolyticum NTOU1 (TsaNTOU1Apu) was identified by truncation mutagenesis. Two truncated TsaNTOU1Apu enzymes, TsaNTOU1ApuM957 and TsaNTOU1ApuK885, were selected and characterized. Both TsaNTOU1ApuM957 and TsaNTOU1ApuK885 showed similar specific activities toward various substrates. The overall catalytic efficiency (k (cat)/apparent K (m)) for the soluble starch or pullulan substrate, however, was 20-25% lower in TsaNTOU1ApuK885 than in TsaNTOU1ApuM957. Both truncated enzymes exhibited similar thermostability and substrate-binding ability against the raw starch. The fluorescence and circular dichroism spectrometry studies indicated that TsaNTOU1ApuK885 retained an active folding conformation similar to that of TsaNTOU1ApuM957. These results indicate that a large part of the TsaNTOU1Apu, such as the C-terminal carbohydrate-binding module family 20, the second fibronectin type III, and a portion of the first FnIII motifs, could be removed without causing a serious aberrant structural change or a dramatic decrease in hydrolysis of soluble starch and pullulan.

A GH57 family amylopullulanase from deep-sea Thermococcus siculi: expression of the gene and characterization of the recombinant enzyme

The gene encoding a new extracellular amylopullulanase (type II pullulanase) was cloned from an extremely thermophilic anaerobic archaeon Thermococcus siculi strain HJ21 isolated previously from a deep-sea hydrothermal vent. The functional hydrolytic domain of the amylopullulanase (TsiApuN) and its MalE fusion protein (MTsiApuN) were expressed heterologously. The complete amylopullulanase (TsiApu) was also purified from fermentation broth of the strain. The pullulanase and amylase activities of the three enzymes were characterized. TsiApu had optimum temperature of 95°C for the both activities, while MTsiApuN and TsiApuN had a higher optimum temperature of 100°C. The residual total activities of MTsiApuN and TsiApuN were both 89% after incubation at 100°C for 1 h, while that of TsiApu was 70%. For all the three enzymes the optimum pHs for amylase and pullulanase activities were 5.0 and 6.0, respectively. By analyzing enzymatic properties of the three enzymes, this study suggests that the carboxy terminal region of TsiApu might interfere with the thermoactivity. The acidic thermoactive amylopullulanases MTsiApuN and TsiApuN could be further employed for industrial saccharification of starch.

Engineering of a truncated alpha-amylase of Bacillus sp. strain TS-23 for the simultaneous improvement of thermal and oxidative stabilities

BACDeltaNC/Delta RS is a thermostable variant derived from the truncated alpha-amylase (BAC Delta NC) of alkaliphilic Bacillus sp. strain TS-23. With the aim of enhancing its resistance towards chemical oxidation, Met231 of BAC Delta NC/Delta RS was replaced by leucine to create BAC Delta NC/Delta RS/M231L. The functional significance of the 31 C-terminal residues of BAC Delta NC/Delta RS/M231L was also explored by site-directed mutagenesis of the 483 th codon in the gene to stop codon (TAA), thereon the engineered enzyme was named BAC Delta NC/Delta RS/M231L/Delta C31. BAC Delta NC/Delta RS/M231L and BAC Delta NC/Delta RS/M231L/Delta C31 were very similar to BAC Delta NC in terms of specific activity, kinetic parameters, pH-activity profile, and the hydrolysis of raw starch; however, the engineered enzymes showed an increased half-life at 70 degrees C. The intrinsic fluorescence and circular dichroism spectra were nearly identical for wild-type and engineered enzymes, but they exhibited a different sensitivity towards GdnHCl-induced denaturation. This implicates that the rigidity of the enzyme has been changed as the consequence of mutations. Performance of the engineered enzymes was evaluated in the presence of commonly used detergent compounds and some detergents from the local markets. A high compatibility and performance of both BAC Delta NC/Delta RS/M231L and BAC Delta NC/Delta RS/M231L/Delta C31 may be desirable for their practical uses in the detergent industry.

Characterization of the C-terminal truncated form of amylopullulanase from Lactobacillus plantarum L137

A gene (apuA) encoding amylopullulanase from a starch-hydrolyzing lactic acid bacterium, Lactobacillus plantarum L137, which had been isolated from traditional fermented food made from fish and rice in the Philippines, was found to contain two unique amino acid repeating units in the N- and C-terminal region. The former is a six amino acid sequence (Asp-Ala/Thr-Ala-Asn-Ser-Thr) repeated 39 times, and the latter is a three amino acid sequence (Gln-Pro-Thr) repeated 50 times. To clarify the role of these repeating units, a truncated apuA in the C-terminal region was constructed and expressed in L. plantarum NCL21, which is the ApuA- derivative of strain L137. The recombinant truncated amylopullulanase (ApuADelta), which lacks the 24 kDa of the C-terminal repeat region, was purified and characterized, and compared with wild-type amylopullulanase (ApuA). The enzyme production and specific activity of ApuADelta were higher than those of ApuA. The two enzymes, ApuA and ApuADelta, showed similar pH (4.0-4.5) and temperature (40-45 degrees C) optima. However, the activity of ApuADelta was more stable in the pH and temperature than that of ApuA. The catalytic efficiencies of ApuADelta toward soluble starch, pullulan and amylose were higher than those of ApuA, although their substrate specificities towards saccharides were similar. From these results, we conclude that the C-terminal repeating region of ApuA is negatively involved in the stability of amylopullulanase and binding of substrates. Thus, the truncated amylopullulanase is more useful in processing of amylose and pullulan.