Effect of water and fluoride content on morphology and barrier layer properties of TiO2 nanotubes grown in ethylene glycol-based electrolytes

TiO2 as an Anode of High-Performance Lithium-Ion Batteries: A Comprehensive Review towards Practical Application

Lithium-ion batteries (LIBs) are undeniably the most promising system for storing electric energy for both portable and stationary devices. A wide range of materials for anodes is being investigated to mitigate the issues with conventional graphite anodes. Among them, TiO2 has attracted extensive focus as an anode candidate due to its green technology, low volume fluctuations (<4%), safety, and durability. In this review, the fabrication of different TiO2 nanostructures along with their electrochemical performance are presented. Different nanostructured TiO2 materials including 0D, 1D, 2D, and 3D are thoroughly discussed as well. More precisely, the breakthroughs and recent developments in different anodic oxidation processes have been explored to identify in detail the effects of anodization parameters on nanostructure morphology. Clear guidelines on the interconnected nature of electrochemical behaviors, nanostructure morphology, and tunable anodic constraints are provided in this review.

Titanium dioxide nanotubes: synthesis, structure, properties and applications

Methods of synthesis of nanotubular structures based on titania of various phase and chemical compositions are described. A systematic account is given of known data about the influence of synthesis and subsequent treatment conditions on the amorphous and crystal structures, specific surface area, morphology and optical, luminescence and electro-physical properties of titania-based nanotubular oxide materials. The photocatalytic properties in the oxidation reactions of organic compounds and the performance characteristics of the memristive behaviour of TiO2-based nanotubular structures are considered in details. Their applications are discussed.

The bibliography includes 238 references.

Modification of charge transport in nanostructured TiO2-xSchottky diodes via post fabrication annealing

An ordered, crack-free array of anatase TiO₂nanotubes were prepared via anodization and annealing at 550 °C. Oxygen vacancies are known to improve photocatalytic activity in TiO₂and were introduced using a facile low vacuum annealing. Stoichiometric and nonstoichiometric films were followed by a conformal Pt deposition at 250 °C using atomic layer deposition resulting in a current rectifying device, or Schottky diode. Here, we investigated the current-voltage effects of a post thermal treatment using 350 °C and 400 °C. This paper presents reproducible improvements in the charge transport behavior after a 350 °C post-fabrication annealing process. Oxygen vacancies resulted in the formation of a shunt resistance behavior of 10⁵Ω and no overall performance improvements compared to stoichiometric films. Additionally, thermal treatments offered trap-based shifts from multiple trap distributions to a single trap distribution. This work hereby provides valuable experimental observations into understanding the effects of oxygen vacancies and effectively modifying the electronic properties of a conformal Pt/TiO_2-xnanostructured junction using a facile post-thermal treatment.

Mechanical Properties of Different Nanopatterned TiO2 Substrates and Their Effect on Hydrothermally Synthesized Bioactive Hydroxyapatite Coatings

Nanotechnology is a very attractive tool for tailoring the surface of an orthopedic implant to optimize its interaction with the biological environment. Nanostructured interfaces are promising, especially for orthopedic applications. They can not only improve osseointegration between the implant and the living bone but also may be used as drug delivery platforms. The nanoporous structure can be used as a drug carrier to the surrounding tissue, with the intention to accelerate tissue–implant integration as well as to reduce and treat bacterial infections occurring after implantation. Titanium oxide nanotubes are promising for such applications; however, their brittle nature could be a significantly limiting factor. In this work, we modified the topography of commercially used titanium foil by the anodization process and hydrothermal treatment. As a result, we obtained a crystalline nanoporous u-shaped structure (US) of anodized titanium oxide with improved resistance to scratch compared to TiO₂ nanotubes. The US titanium substrate was successfully modified with hydroxyapatite coating and investigated for bioactivity. Results showed high bioactivity in simulated body fluid (SBF) after two weeks of incubation.

Dismutation of Titanium Sub-oxide into TiO and TiO2 with Structural Hierarchy Assisted by Ammonium Halides

Black TiO_2-x attracts enormous attention due to its large solar absorption and improved conductivity. In this work, a novel structure of TiO_2-x with conductive TiO layer, performing full-spectrum absorption, was synthesized in one step by the unforeseen dismutation reaction of titanium sub-oxides (Ti_n O_2n-1 ) in ammonium halide atmosphere. For this new reaction, a possible mechanism of decomposition-etching-disproportionation-rehydrolysis process was proposed. The vital intermediate reactant TiCl₄ , which verifies the assumption, has been captured in the form of (NH₄ )₂ TiCl₆ , especially where Ti₂ O₃ is the reactant. Furthermore, this work not only can nominate TiO as an alternative for noble metals or carbon materials in the aim to improve the electron conductivity and solar absorption of black TiO_2-x , which are important in electrochemistry and optoelectronics fields, but also can be a new route to synthesize special structures for other multivalent transition metals.

How does the Zn-precursor nature impact carrier transfer in ZnO/Zn-TiO2 nanostructures? organic vs. inorganic anions

The carrier transport capability of ZnO/Zn-TiO₂ nanostructures is affected by Zn-precursor anions, generating donor, acceptor and interfacial energy states.

Novel Titania Nanocoatings Produced by Anodic Oxidation with the Use of Cyclically Changing Potential: Their Photocatalytic Activity and Biocompatibility

The anodic oxidation of Ti6Al4V substrate surfaces with the use of cyclically changing potential enabled the production of novel titania nanocoatings. Morphologically different coatings were prepared in the ethylene glycol-based electrolyte with diluted HF and various amounts of water. The structure of the produced surface materials was characterized by X-ray diffraction, Raman spectroscopy, and diffuse reflectance infrared Fourier transform spectroscopy. Their morphology was visualized by scanning electron microscopy. The photocatalytic efficiency of produced materials was studied by the observation of methylene blue degradation under UV irradiation. Their biointegration properties were established on the basis of immunological assays, which checked murine fibroblasts adhesion and proliferation on novel coatings. The obtained results pointed out to both high biocompatibility, as well as the photoactivity of one of the obtained nanocoatings, allowing trusting in the applicative nature of this material.

Effects of NH4F and distilled water on structure of pores in TiO2 nanotube arrays

In this study, we report the influences of distilled water and ammonium fluoride (NH4F) on morphology of pores in honeycomb-like titanium dioxide (TiO2) nanotube arrays. We observed the structure and arrangement of pores in the TiO2 nanotube arrays based on scanning electron microscopy images and analyzed the spatial distribution of the pores using fast Fourier transform and Voronoi diagram. We studied the individual pore properties including pore diameter, wall thickness, and interpore distance and found that locally connected ordering defects decreased with increasing distilled water concentration. Furthermore, we found that the optimum conditions of well-ordered hexagonal pore arrangement were 2 and 10 vol% distilled water with 0.2 and 0.4 wt% NH4F, respectively. Throughout this study, we provide a better understanding about the roles of distilled water and NH4F in forming well-ordered nanoscale pore structure with less ordering defects in the honeycomb-like TiO2 nanotube arrays.

Transparent Nanotubular TiO₂ Photoanodes Grown Directly on FTO Substrates

This work describes the preparation of transparent TiO₂ nanotube (TNT) arrays on fluorine-doped tin oxide (FTO) substrates. An optimized electrolyte composition (0.2 mol dm⁻³ NH₄F and 4 mol dm⁻³ H₂O in ethylene glycol) was used for the anodization of Ti films with different thicknesses (from 100 to 1300 nm) sputtered on the FTO glass substrates. For Ti thicknesses 600 nm and higher, anodization resulted in the formation of TNT arrays with an outer nanotube diameter around 180 nm and a wall thickness around 45 nm, while for anodized Ti thicknesses of 100 nm, the produced nanotubes were not well defined. The transmittance in the visible region (λ = 500 nm) varied from 90% for the thinnest TNT array to 65% for the thickest TNT array. For the fabrication of transparent TNT arrays by anodization, the optimal Ti thickness on FTO was around 1000 nm. Such fabricated TNT arrays with a length of 2500 nm exhibit stable photocurrent densities in aqueous electrolytes (~300 µA cm⁻² at potential 0.5 V vs. Ag/AgCl). The stability of the photocurrent response and a sufficient transparency (≥65%) enables the use of transparent TNT arrays in photoelectrochemical applications when the illumination from the support/semiconductor interface is a necessary condition and the transmitted light can be used for another purpose (photocathode or photochemical reaction in the electrolyte).

Fast Growth of Highly Ordered TiO2 Nanotube Arrays on Si Substrate under High-Field Anodization

ABSTRACT

Highly ordered TiO₂ nanotube arrays (NTAs) on Si substrate possess broad applications due to its high surface-to-volume ratio and novel functionalities, however, there are still some challenges on facile synthesis. Here, we report a simple and cost-effective high-field (90-180 V) anodization method to grow highly ordered TiO₂ NTAs on Si substrate, and investigate the effect of anodization time, voltage, and fluoride content on the formation of TiO₂ NTAs. The current density-time curves, recorded during anodization processes, can be used to determine the optimum anodization time. It is found that the growth rate of TiO₂ NTAs is improved significantly under high field, which is nearly 8 times faster than that under low fields (40-60 V). The length and growth rate of the nanotubes are further increased with the increase of fluoride content in the electrolyte.

GRAPHICAL ABSTRACT

Highly ordered TiO₂ nanotube arrays (NTAs) on Si substrate have been fabricated by high-field anodization method. A high voltage (90-180 V) leads to a high growth rate of TiO₂ NTAs (35-47 nm s^-1), which is nearly 8 times faster than the growth rate under low fields (40-60 V). Furthermore, the current density-time curves recorded during the anodization provide a facial method to determine the optimal anodization parameters, leading to an easy obtaining of the desired nanotubes.

Improving the photoelectrocatalytic performance of boron-modified TiO2/Ti sol–gel-based electrodes for glycerol oxidation under visible illumination

B-TiO₂ photoelectrodes showed a high photoelectrocatalytic performance under visible illumination due to efficient electron transport and charge carrier separation.

Anodization parameters influencing the morphology and electrical properties of TiO2 nanotubes for living cell interfacing and investigations

Nanotube structures have attracted tremendous attention in recent years in many applications. Among such nanotube structures, titania nanotubes (TiO2) have received paramount attention in the medical domain due to their unique properties, represented by high corrosion resistance, good mechanical properties, high specific surface area, as well as great cell proliferation, adhesion and mineralization. Although lot of research has been reported in developing optimized titanium nanotube structures for different medical applications, however there is a lack of unified literature source that could provide information about the key parameters and experimental conditions required to develop such optimized structure. This paper addresses this gap, by focussing on the fabrication of TiO2 nanotubes through anodization process on both pure titanium and titanium alloys substrates to exploit the biocompatibility and electrical conductivity aspects, critical factors for many medical applications from implants to in-vivo and in-vitro living cell studies. It is shown that the morphology of TiO2 directly impacts the biocompatibility aspects of the titanium in terms of cell proliferation, adhesion and mineralization. Similarly, TiO2 nanotube wall thickness of 30-40nm has shown to exhibit improved electrical behaviour, a critical factor in brain mapping and behaviour investigations if such nanotubes are employed as micro-nano-electrodes.

InSitu Anodization of WO₃-Decorated TiO₂ Nanotube Arrays for Efficient Mercury Removal

WO₃-decorated TiO₂ nanotube arrays were successfully synthesized using an in situ anodization method in ethylene glycol electrolyte with dissolved H₂O₂ and ammonium fluoride in amounts ranging from 0 to 0.5 wt %. Anodization was carried out at a voltage of 40 V for a duration of 60 min. By using the less stable tungsten as the cathode material instead of the conventionally used platinum electrode, tungsten will form dissolved ions (W⁶⁺) in the electrolyte which will then move toward the titanium foil and form a coherent deposit on the titanium foil. The fluoride ion content was controlled to determine the optimum chemical dissolution rate of TiO₂ during anodization to produce a uniform nanotubular structure of TiO₂ film. Nanotube arrays were then characterized using FESEM, EDAX, XRD, as well as Raman spectroscopy. Based on the FESEM images obtained, nanotube arrays with an average pore diameter of up to 65 nm and a length of 1.8 µm were produced. The tungsten element in the samples was confirmed by EDAX results which showed varying tungsten content from 0.22 to 2.30 at%. XRD and Raman results showed the anatase phase of TiO₂ after calcination at 400 °C for 4 h in air atmosphere. The mercury removal efficiency of the nanotube arrays was investigated by photoirradiating samples dipped in mercury chloride solution with TUV (Tube ultraviolet) 96W UV-B Germicidal light. The nanotubes with the highest aspect ratio (15.9) and geometric surface area factor (92.0) exhibited the best mercury removal performance due to a larger active surface area, which enables more Hg²⁺ to adsorb onto the catalyst surface to undergo reduction to Hg⁰. The incorporation of WO₃ species onto TiO₂ nanotubes also improved the mercury removal performance due to improved charge separation and decreased charge carrier recombination because of the charge transfer from the conduction band of TiO₂ to the conduction band of WO₃.

The effect of anatase crystal orientation on the photoelectrochemical performance of anodic TiO2 nanotubes

TiO2 nanotube films were prepared by anodizing Ti plates in ethylene glycol based electrolytes containing variable concentrations of ammonium fluoride and water. The morphology, optical and semiconducting properties, as well as the composition of TiO2 films were shown to be dependent on the anodizing bath composition. Among different film properties, only the preferential orientation of anatase crystals, quantified with the texture coefficient of the (004) plane, TC(004), showed the same dependence of photoelectrochemical performance on the electrolyte composition. The increased value of TC(004) was related to anatase crystals piling up in the [001] direction (normal to the plane of the Ti substrate), forming a fiber like texture structure along the tube that facilitates the transport of photogenerated electrons toward the conducting substrate.