Consecutive metal oxides with self-supported nanoarchitecture achieves highly stable and enhanced photoelectrocatalytic oxidation for water purification

Developing Z-scheme Bi2MoO6@α-MnO2 beaded core-shell heterostructure in photoelectrocatalytic treatment of organic wastewater

Photoelectrocatalysis (PEC) oxidation technology with the combination of electrocatalysis and photocatalysis is an ideal candidate for treatment of dyeing wastewater containing multifarious intractable organic compounds with high chroma. Constructing high-quality heterojunction photoelectrodes can effectively suppress the recombination of photo-generated carriers, thereby achieving efficient removal of pollution. Herein, a beaded Bi2MoO6@α-MnO2 core-shell architecture with tunable hetero-interface was prepared by simple hydrothermal-solvothermal process. The as-synthesized Bi2MoO6@α-MnO2 had larger electrochemically active surface area, smaller charge transfer resistance and negative flat band potential, and higher separation efficiency of e-/h+ pairs than pure α-MnO2 or Bi2MoO6. It is noteworthy that the as-synthesized Bi2MoO6@α-MnO2 showed Z-scheme heterostructure as demonstrated by the free radical quenching experiments. The optimized Bi2MoO6@α-MnO2-2.5 exhibited the highest degradation rate of 88.64% in 120 min for reactive brilliant blue (KN-R) and accelerated stability with long-term(∼10000s) at the current density of 50 mA cm-2 in 1.0 mol L-1 H2SO4 solution. This study provides valuable insights into the straightforward preparation of heterogeneous electrodes, offering a promising approach for the treatment of wastewater in various industrial applications.

Photoassisted Water Purification through an Electrochemically Artificially Adjusted p-Cu2O Light Absorption Layer

The implementation of photoelectrochemical water purification technology can address prevailing environmental challenges that impede the advancement and prosperity of human society. In this study, Cu, which is abundant on Earth, was fabricated using an electrochemical deposition process, in which the preferential orientation direction and carrier concentration of the Cu-based oxide semiconductor were artificially adjusted by carefully controlling the OH- and applied voltage. In particular, Cu2O grown with a sufficient supply of OH- ions exhibited the (111) preferred orientation, and the (200) surface facet was exposed, independently achieving 90% decomposition efficiency in a methyl orange (MO) solution for 100 min. This specialized method minimizes the recombination loss of electron-hole pairs by increasing the charge separation and transport efficiency of the bulk and surface of the Cu2O multifunctional absorption layer. These discoveries and comprehension not only offer valuable perspectives on mitigating self-photocorrosion in Cu2O absorbing layers but also provide a convenient and expeditious method for the mass production of water purification systems that harness unlimited solar energy. These properties enable significant energy saving and promote high-speed independent removal of organic pollutants (i.e., MO reduction) during the water purification process.

Unveiling Hierarchical Dendritic Co3O4-SnO2 Heterostructure for Efficient Water Purification

The construction of a desirable, environmentally friendly, and cost-effective nanoheterostructure photoanode to treat refractory organics is critical and challenging. Herein, we unveiled a hierarchical dendritic Co₃O₄-SnO₂ heterostructure via a sequential hydrothermal process. The time of the secondary hydrothermal process can control the size of the ultrathin SnO₂ nanosheets on the basis of the Ostwald solidification mass conservation principle. Ti/Co₃O₄-SnO₂-168h with critical growth size demonstrated a photoelectrocatalysis degradation rate of ∼93.3% for a high dye concentrate of 90 mg/L with acceptable long-term cyclability and durability over reported Co₃O₄-based electrodes because of the large electrochemically active area, low charge transfer resistance, and high photocurrent intensity. To gain insight into the photoelectric synergy, we proposed a type-II heterojunction between Co₃O₄ and SnO₂, which prevents photogenerated carriers' recombination and improves the generation of dominant active species •O₂^-, ¹O₂, and h⁺. This work uncovered the Ti/Co₃O₄-SnO₂-168 as a promising catalyst and provided a simple and inexpensive assembly strategy to obtain binary integrated nanohybrids with targeted functionalities.

Constructing Z-scheme NiMoO4@Co3O4 core-shell heterogeneous architectures with prominent photoelectrocatalytic performance toward water purification

Photoelectrocatalysis (PEC) oxidation is an efficient and eco-friendly advanced oxidation process (AOP), which is a hot research topic in the treatment of organic wastewater. The selection of superior photoelectrode materials is the critical factor affecting PEC efficiency and the main challenge in practical application. In this work, novel NiMoO₄@Co₃O₄ hierarchical core-shell heterogeneous photoanodes were prepared through a two-step hydrothermal method and exhibited superior catalytic performance in the degradation of reactive brilliant blue KN-R. The wrapping of NiMoO₄ nanosheets on Co₃O₄ nanowires electrode can enlarge its contact area with electrolyte, enable fast redox reaction and improve the long-term durability. The unique Z-scheme heterojunction structure between the two components ensured the effective separation of photo-generated carriers, facilitating the generation of OH and O^2- during the PEC degradation process. The optimal NiMoO₄@Co₃O₄-1.25 hierarchical architecture anode catalyst exhibited the highest removal rate of 83.65% of reactive brilliant blue KN-R in 120 min with long-term stability (∼12000 s) in 1.0 mol·L^-1 H₂SO₄ solution. This report may inspire the design and fabrication of heterostructure photoanode in water purification.

The state-of-the-art development of photocatalysts for the degradation of persistent herbicides in wastewater

Herbicides are one of the most recurring pollutants in the aquatic system due to their widespread usage in the agriculture sector for weed control. Semiconductor-based photocatalysts have gained recognition due to their ability to degrade and mineralize pollutants into harmless by-products completely. Lately, many studies have been done to design photocatalysts with efficient separation of photogenerated charge carriers and enhanced light absorption. Photocatalyst engineering through doping with metal and non-metal elements and the formation of heterojunction are proven effective for minimizing the recombination of electron-hole pairs and enlarging the absorption in the visible light region. This review focuses on discussing and evaluating the recent progress in the types of photocatalysts and their performance in the remediation of herbicides in wastewater. The development of innovative hybrid technologies is also highlighted. The limitations and challenges of photocatalysis technology in the present literature have been identified, and future studies are recommended.