Full polysaccharide crosslinked-chitosan and silver nano composites, for use as an antibacterial membrane

Advances in Stimuli-Responsive Chitosan Hydrogels for Drug Delivery Systems

Sustainable and controllable drug transport is one of the most efficient ways of disease treatment. Due to high biocompatibility, good biodegradability, and low costs, chitosan and its derivatives are widely used in biomedical fields. Specifically, chitosan hydrogel enables drugs to pass through biological barriers because of their abundant amino and hydroxyl groups that can interact with human tissues. Moreover, the multi-responsive nature (pH, temperature, ions strength, and magnetic field, etc.) of chitosan hydrogels makes precise drug release a possibility. Here, the synthesis methods, modification strategies, stimuli-responsive mechanisms of chitosan-based hydrogels, and their recent progress in drug delivery are summarized. Chitosan hydrogels that carry and release drugs through subcutaneous (dealing with wound dressing), oral (dealing with gastrointestinal tract), and facial (dealing with ophthalmic, ear, and brain) are reviewed. Finally, challenges toward clinic application and the future prospects of stimuli-responsive chitosan-based hydrogels are indicated.

Curcumin Sustained Release with a Hybrid Chitosan-Silk Fibroin Nanofiber Containing Silver Nanoparticles as a Novel Highly Efficient Antibacterial Wound Dressing

Drug loading in electrospun nanofibers has gained a lot of attention as a novel method for direct drug release in an injury site to accelerate wound healing. The present study deals with the fabrication of silk fibroin (SF)-chitosan (CS)-silver (Ag)-curcumin (CUR) nanofibers using the electrospinning method, which facilitates the pH-responsive release of CUR, accelerates wound healing, and improves mechanical properties. Response surface methodology (RSM) was used to investigate the effect of the solution parameters on the nanofiber diameter and morphology. The nanofibers were characterized via Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential, and Dynamic Light Scattering (DLS). CS concentration plays a crucial role in the physical and mechanical properties of the nanofibers. Drug loading and entrapment efficiencies improved from 13 to 44% and 43 to 82%, respectively, after the incorporation of Ag nanoparticles. The application of CS hydrogel enabled a pH-responsive release of CUR under acid conditions. The Minimum Inhibitory Concentration (MIC) assay on E. coli and S. aureus bacteria showed that nanofibers with lower CS concentration cause stronger inhibitory effects on bacterial growth. The nanofibers do not have any toxic effect on cell culture, as revealed by in vitro wound healing test on NIH 3T3 fibroblasts.

Recent development in antibacterial activity and application of nanozymes in food preservation

Nanozymes with excellent broad-spectrum antibacterial properties offers an alternative strategy for food preservation. This review comprehensively summarized the antibacterial mechanisms of nanozymes, including the generation of reactive oxygen species (ROS) and the destruction of biofilms. Besides, the primary factors (size, morphology, hybridization, light, etc.) regulating the antibacterial activity of different types of nanozymes were highlighted in detail, which provided effective guidance on how to design highly efficient antibacterial nanozymes. Moreover, this review presented elaborated viewpoints on the unique applications of nanozymes in food preservation, including the selection of nanozymes loading matrix, fabrication techniques of nanozymes-based antibacterial films/coatings, and the recent advances in the application of nanozymes-based antibacterial films/coatings in food preservation. In the end, the safety issues of nanozymes have also been mentioned. Overall, this review provided new avenues in the field of food preservation and displayed great prospects.

High antibacterial activity of chitosan films with covalent organic frameworks immobilized silver nanoparticles

In this study, chitosan (CS) film containing covalent organic frameworks (COFs) immobilized silver nanoparticles (AgNPs) were developed for food packaging with improved antibacterial activities and film properties. COFs-AgNPs were fabricated via in-situ synthesis of immobilizing AgNPs on COFs. Transmission electron microscope, Zeta potential, X-ray diffraction, element mapping and Fourier transform infrared spectroscopy confirmed the successful fabrication of COFs-AgNPs, and COFs-AgNPs showed superior antibacterial activity against S. aureus and E. coli. Furthermore, the as-prepared COFs-AgNPs composite was further used to fabricate CS composite films (CS/COFs-AgNPs) by a solution casting method. The findings showed that the tensile strength of the nanocomposite films enhanced dramatically with the increase of the COFs-AgNPs content, while the UV-visible light barrier property, water swelling and solubility properties, and water vapor permeability (WVP) decreased significantly. Not only that, the CS/COFs-AgNPs nanocomposite films also showed outstanding antibacterial activity and effectively prolonged the storage time of white crucian carp (Carassius auratus). As a result, CS/COFs-AgNPs nanocomposite films show great potential in active food packaging.

Antiliquid-Interfering, Antibacteria, and Adhesive Wearable Strain Sensor Based on Superhydrophobic and Conductive Composite Hydrogel

Conductive hydrogels are promising multifunctional materials for wearable sensors, but their practical applications require combined properties that are difficult to achieve. Herein, we developed a flexible wearable sensor with double-layer structure based on conductive composite hydrogel, which included the outer layer of silicone elastomer (Ecoflex)/silica microparticle composite film and the inner layer of P(AAm-co-HEMA)-MXene-AgNPs hydrogel. Through covalently cross-linking silicone elastomer on the surface of the hydrogel polymer, we bonded a thin Ecoflex film (100 μm) on the P(AAm-co-HEMA)-MXene-AgNPs hydrogel with robust interface, which can easily adhere to the Ecoflex/SiO₂ microparticle composite film by silicone glue. The Ecoflex/SiO₂ microparticle composite film endows the strain wearable sensor with superhydrophobic function that could maintain the stability under stretching or bending. Moreover, it can effectively resist the interference of water droplets and water flow. The P(AAm-co-HEMA)-MXene-AgNPs hydrogel exhibits outstanding antibacterial activity to inhibit Staphylococcus aureus, Escherichia coli, and even drug-resistant Escherichia coli. In addition, the flexible wearable sensor exhibited good self-adhesive performance by changing the reaction temperature of hydrogel and can adhere strongly onto various materials. The conductive composite hydrogel reported in this work contributes an innovative strategy for the preparation of multifunctional flexible wearable sensor.

Antimicrobial chitosan-agarose full polysaccharide silver nanocomposite films

The antibacterial and biocompatible films have attracted much attention due to their wide range of applications. Although a lot of work has been done in this area, research in this field is still very active and associated with the continuous development of new materials. In the present study full polysaccharide chitosan-agarose (CS-AG) films were produced by reaction of chitosan with periodate activated agarose, followed by reductive amination. Activated agarose was prepared by periodate oxidation of agarose, and then applied as a crosslinking agent to form a new polymeric network. The structure of periodate activated agarose was studied by nuclear magnetic resonances spectroscopy (¹H NMR) and Fourier-transform infrared spectroscopy (FT-IR). Rheological experiments showed that the viscosity of agarose solution changes rapidly by addition of periodate to the solution. Swelling, deswelling, and gel content of the films were determined at different pH. Chitosan-agarose silver nanocomposite (CS-AG/n-Ag) films were prepared by loading silver ions and subsequent reduction. The CS-AG/n-Ag films were characterized by FT-IR, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM).Transmission electron microscopy (TEM) image showed that the size of silver nanoparticles was about 2-7 nm. The bactericidal capacities (MBC/MIC) of the CS-AG/Ag films for Pseudomonas aeruginosa (P. aeruginosa), Escherichia coli (E. coli), and Staphylococcus aureus (S. aureus) were obtained 2.0, 1.0 and 2.0, respectively. The results demonstrate that the CS-AG/n-Ag films have good antibacterial activity against both the gram-negative and the gram-positive bacteria which make them suitable for food packaging and wound healing applications.

Covalent grafting of hyperbranched poly-L-lysine on Ti-based implants achieves dual functions of antibacteria and promoted osteointegration in vivo

The dual functional implants of antibacteria and osteointegration are highly demanded in orthopedic and dentistry, especially for patients who suffer from diabetes or osteoporosis simultaneously. However, there is lack of the facile and robust method to produce clinically applicable implants with this dual function although coatings possessing single function have been extensively developed. Herein, hyperbranched poly-L-lysine (HBPL) polymers were covalently immobilized onto the alkali-heat treated titanium (Ti) substrates and implants by using 3-glycidyloxypropyltrimethoxysilane (GPTMS) as the coupling agent, which displayed excellent antibacterial activity against S. aureus and E. coli with an efficiency as high as 89.4% and 92.2% in vitro, respectively. The HBPL coating also significantly promoted the adhesion, spreading, proliferation and osteogenic differentiation of MC3T3-E1 cells in vitro. Furthermore, the results of a S. aureus infection rat model in vivo ulteriorly verified that the HBPL-modified screws had good antibacterial and anti-inflammatory abilities at an early stage of implantation and better osteointegration compared with the control Ti screws.

Bio-crosslinking of chitosan with oxidized starch, its functionalization with amino acid and magnetization: As a green magnetic support for silver immobilization and its catalytic activity investigation

In this study, we have reported the synthesis and characterization of new magnetic bionanocatalyst based on chitosan and investigated their catalytic activity in the A³-coupling reaction. In order to increase the stability of chitosan, starch oxide biopolymer was used as a green covalent linking agent between chitosan chains. After the cross-linking of chitosan with starch oxide, aldehyde functional groups were reacted with amine groups of cysteine to form the corresponding Schiff bases in the hybrid biopolymer. Then, the imine bonds were reduced to prevent possible their hydrolysis. The magnetic support was resulted with addition of iron oxide nanoparticles. In the presence of thiol and carboxylate coordinated groups of amino acid, silver ions were immobilized on this biosupport.

An injectable supramolecular hydrogel hybridized with silver nanoparticles for antibacterial application

Silver nanoparticles (AgNPs) show long-lasting and broad-spectrum antibacterial activity. Herein, PEGylated AgNPs were prepared in situ by complexing AgNO₃ with the random copolymer of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and polyacrylic acid via electrostatic interaction followed by in situ reduction. AgNP hybrid supramolecular hydrogels were thus prepared through host-guest inclusion between PEGMA side chains and α-cyclodextrins in aqueous solution. The hydrogels were physically cross-linked by both pseudopolyrotaxane crystallization and AgNPs, which showed temperature responsiveness and self-healing properties. By hybridizing AgNPs, the hydrogels showed excellent antibacterial properties against S. aureus and E. coli bacteria as well as low cytotoxicity and have potential applications as injectable antibacterial materials.