Comparative chondrogenesis of human cells in a 3D integrated experimental-computational mechanobiology model

Generation and evaluation of input values for computational analysis of transport processes within tissue cultures

Techniques for tissue culture have seen significant advances during the last decades and novel 3D cell culture systems have become available. To control their high complexity, experimental techniques and their Digital Twins (modelling and computational tools) are combined to link different variables to process conditions and critical process parameters. This allows a rapid evaluation of the expected product quality. However, the use of mathematical simulation and Digital Twins is critically dependent on the precise description of the problem and correct input parameters. Errors here can lead to dramatically wrong conclusions. The intention of this review is to provide an overview of the state-of-the-art and remaining challenges with respect to generating input values for computational analysis of mass and momentum transport processes within tissue cultures. It gives an overview on relevant aspects of transport processes in tissue cultures as well as modelling and computational tools to tackle these problems. Further focus is on techniques used for the determination of cell-specific parameters and characterization of culture systems, including sensors for on-line determination of relevant parameters. In conclusion, tissue culture techniques are well-established, and modelling tools are technically mature. New sensor technologies are on the way, especially for organ chips. The greatest remaining challenge seems to be the proper addressing and handling of input parameters required for mathematical models. Following Good Modelling Practice approaches when setting up and validating computational models is, therefore, essential to get to better estimations of the interesting complex processes inside organotypic tissue cultures in the future.

Larger Chondral Lesions Treated with Collagen Membrane - Matrix-Induced Autologous Chondrogenesis - Show Larger Increase in Clinical Scores

Objective  To evaluate clinically and radiologically the results of the treatment of chondral lesions using collagen membrane - autologous matrix-induced chondrogenesis (AMIC).

Methods  This is a series of observational cases, in which 15 patients undergoing AMIC were analyzed. The clinical evaluation was made by comparing the Lysholm and International Knee Document Commitee (IKDC) scores in the pre- and postoperative period of 12 months, and radiological evaluation using the Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART) score in the same postoperative period.

Results  The mean age of the patients was 39.2 years old, and the mean size of the chondral lesions was 1.55cm ² . There was a significant improvement in clinical scores, with a mean increase of 24.6 points on Lysholm and of 24.3 on IKDC after 12 months. In the radiological evaluation, MOCART had a mean of 65 points. It was observed that the larger the size of the lesion, the greater the improvement in scores.

Conclusion  Evaluating subjective clinical scores, the treatment of chondral lesions with the collagen membrane showed good results, as well as the evaluation of MOCART, with greater benefit in larger lesions.

Microfluidic Biofabrication of 3D Multicellular Spheroids by Modulation of Non-geometrical Parameters

Three-dimensional (3D) cell spheroids are being increasingly applied in many research fields due to their enhanced biological functions as compared to conventional two-dimensional (2D) cultures. 3D cell spheroids can replicate tissue functions, which enables their use both as in vitro models and as building blocks in tissue biofabrication approaches. In this study, we developed a perfusable microfluidic platform suitable for robust and reproducible 3D cell spheroid formation and tissue maturation. The geometry of the device was optimized through computational fluid dynamic (CFD) simulations to improve cell trapping. Experimental data were used in turn to generate a model able to predict the number of trapped cells as a function of cell concentration, flow rate, and seeding time. We demonstrated that tuning non-geometrical parameters it is possible to control the size and shape of 3D cell spheroids generated using articular chondrocytes (ACs) as cellular model. After seeding, cells were cultured under perfusion at different flow rates (20, 100, and 500 μl/min), which induced the formation of conical and spherical spheroids. Wall shear stress values on cell spheroids, computed by CFD simulations, increased accordingly to the flow rate while remaining under the chondroprotective threshold in all configurations. The effect of flow rate on cell number, metabolic activity, and tissue-specific matrix deposition was evaluated and correlated with fluid velocity and shear stress distribution. The obtained results demonstrated that our device represents a helpful tool to generate stable 3D cell spheroids which can find application both to develop advanced in vitro models for the study of physio-pathological tissue maturation mechanisms and to obtain building blocks for the biofabrication of macrotissues.

Applications of Computer Modeling and Simulation in Cartilage Tissue Engineering

BACKGROUND

Advances in cartilage tissue engineering have demonstrated noteworthy potential for developing cartilage for implantation onto sites impacted by joint degeneration and injury. To supplement resource-intensive in vivo and in vitro studies required for cartilage tissue engineering, computational models and simulations can assist in enhancing experimental design.

METHODS

Research articles pertinent to cartilage tissue engineering and computer modeling were identified, reviewed, and summarized. Various applications of computer modeling for cartilage tissue engineering are highlighted, limitations of in silico modeling are addressed, and suggestions for future work are enumerated.

RESULTS

Computational modeling can help better characterize shear stresses generated by bioreactor fluid flow, refine scaffold geometry, customize the mechanical properties of engineered cartilage tissue, and model rates of cell growth and dynamics. Thus, results from in silico studies can help resourcefully enhance in vitro and in vivo studies; however, the limitations of these studies, such as the underlying assumptions and simplifications applied in each model, should always be addressed and justified where applicable. In silico models should also seek validation and verification when possible.

CONCLUSION

Future studies may adopt similar approaches to supplement in vitro trials and further investigate effects of mechanical stimulation on chondrocyte and stem cell dynamics. Additionally, as precision medicine, machine learning, and powerful open-source software become more popular and accessible, applications of multi-scale and multiphysics computational models in cartilage tissue engineering are expected to increase.

Articular cartilage regeneration and tissue engineering models: a systematic review

INTRODUCTION

Cartilage regeneration and restoration is a major topic in orthopedic research as cartilaginous degeneration and damage is associated with osteoarthritis and joint destruction. This systematic review aims to summarize current research strategies in cartilage regeneration research.

MATERIALS AND METHODS

A Pubmed search for models investigating single-site cartilage defects as well as chondrogenesis was conducted and articles were evaluated for content by title and abstract. Finally, only manuscripts were included, which report new models or approaches of cartilage regeneration.

RESULTS

The search resulted in 2217 studies, 200 of which were eligible for inclusion in this review. The identified manuscripts consisted of a large spectrum of research approaches spanning from cell culture to tissue engineering and transplantation as well as sophisticated computational modeling.

CONCLUSIONS

In the past three decades, knowledge about articular cartilage and its defects has multiplied in clinical and experimental settings and the respective body of research literature has grown significantly. However, current strategies for articular cartilage repair have not yet succeeded to replicate the structure and function of innate articular cartilage, which makes it even more important to understand the current strategies and their impact. Therefore, the purpose of this review was to globally summarize experimental strategies investigating cartilage regeneration in vitro as well as in vivo. This will allow for better referencing when designing new models or strategies and potentially improve research translation from bench to bedside.

Interstitial Perfusion Culture with Specific Soluble Factors Inhibits Type I Collagen Production from Human Osteoarthritic Chondrocytes in Clinical-Grade Collagen Sponges

Articular cartilage has poor healing ability and cartilage injuries often evolve to osteoarthritis. Cell-based strategies aiming to engineer cartilaginous tissue through the combination of biocompatible scaffolds and articular chondrocytes represent an alternative to standard surgical techniques. In this context, perfusion bioreactors have been introduced to enhance cellular access to oxygen and nutrients, hence overcoming the limitations of static culture and improving matrix deposition. Here, we combined an optimized cocktail of soluble factors, the BIT (BMP-2, Insulin, Thyroxin), and clinical-grade collagen sponges with a bidirectional perfusion bioreactor, namely the oscillating perfusion bioreactor (OPB), to engineer in vitro articular cartilage by human articular chondrocytes (HACs) obtained from osteoarthritic patients. After amplification, HACs were seeded and cultivated in collagen sponges either in static or dynamic conditions. Chondrocyte phenotype and the nature of the matrix synthesized by HACs were assessed using western blotting and immunohistochemistry analyses. Finally, the stability of the cartilaginous tissue produced by HACs was evaluated in vivo by subcutaneous implantation in nude mice. Our results showed that perfusion improved the distribution and quality of cartilaginous matrix deposited within the sponges, compared to static conditions. Specifically, dynamic culture in the OPB, in combination with the BIT cocktail, resulted in the homogeneous production of extracellular matrix rich in type II collagen. Remarkably, the production of type I collagen, a marker of fibrous tissues, was also inhibited, indicating that the association of the OPB with the BIT cocktail limits fibrocartilage formation, favoring the reconstruction of hyaline cartilage.

Chondrogenic capability of osteoarthritic chondrocytes from the trapeziometacarpal and hip joints

Osteoarthritis is the most common degenerative disease of joints like the hip and the trapeziometacarpal joint (rhizarthrosis). In this in vitro study, we compared the chondrogenesis of chondrocytes derived from the trapezium and the femoral head cartilage of osteoarthritic patients to have a deeper insight on trapezium chondrocyte behavior as autologous cell source for the repair of cartilage lesions in rhizarthrosis. Chondrocytes collected from trapezium and femoral head articular cartilage were cultured in pellets and analyzed for chondrogenic differentiation, cell proliferation, glycosaminoglycan production, gene expression of chondrogenic and fibrous markers, histological and immunohistochemical analyses. Our results showed a higher cartilaginous matrix deposition and a lower fibrocartilaginous phenotype of the femoral chondrocytes with respect to the trapezium chondrocytes assessed by a higher absolute glycosaminoglycan and type II collagen production, thus demonstrating a superior chondrogenic potential of the femoral with respect to the trapezium chondrocytes. The differences in chondrogenic potential between trapezium and femoral head chondrocytes confirmed a lower regenerative capability in the trapezium than in the femoral head cartilage due to the different environment and loading acting on these joints that affects the metabolism of the resident cells. This could represent a limitation to apply the cell therapy for rhizoarthrosis.

Fluorescent stereo microscopy for 3D surface profilometry and deformation mapping

Recently, mechanobiology has received increased attention. For investigation of biofilm and cellular tissue, measurements of the surface topography and deformation in real-time are a pre-requisite for understanding the growth mechanisms. In this paper, a novel three-dimensional (3D) fluorescent microscopic method for surface profilometry and deformation measurements is developed. In this technique a pair of cameras are connected to a binocular fluorescent microscope to acquire micrographs from two different viewing angles of a sample surface doped or sprayed with fluorescent microparticles. Digital image correlation technique is used to search for matching points in the pairing fluorescence micrographs. After calibration of the system, the 3D surface topography is reconstructed from the pair of planar images. When the deformed surface topography is compared with undeformed topography using fluorescent microparticles for movement tracking of individual material points, the full field deformation of the surface is determined. The technique is demonstrated on topography measurement of a biofilm, and also on surface deformation measurement of the biofilm during growth. The use of 3D imaging of the fluorescent microparticles eliminates the formation of bright parts in an image caused by specular reflections. The technique is appropriate for non-contact, full-field and real-time 3D surface profilometry and deformation measurements of materials and structures at the microscale.

Treatment of isolated chondral and osteochondral defects in the knee by autologous matrix-induced chondrogenesis (AMIC)

PURPOSE

The purpose of this study is to evaluate clinical and radiological outcomes of patients treated with autologous matrix-induced chondrogenesis (AMIC) for full-thickness chondral and osteochondral defects of the femoral condyles and patella.

METHOD

A retrospective evaluation of clinical and radiographic outcomes of patients treated with AMIC for chondral and osteochondral full-thickness cartilage defects of the knee was performed with a mean follow-up of 28.8 ± 1.5 months (range, 13-51 months).

RESULTS

Significant improvements in clinical outcome scores (IKDC, Lysholm, Tegner, and VAS pain score) were noted. The largest improvements were seen in the osteochondral subgroup (mean age 25.9 years), whereas patients treated for chondral defects in the patellofemoral joint and on the femoral condyles improved less. Patients in all groups were generally satisfied with their results. MRI evaluation showed that tissue filling was present but generally not complete or homogenous.

CONCLUSIONS

AMIC is a safe procedure and leads to clinical improvement of symptomatic full-thickness chondral and osteochondral defects and to regenerative defect filling. The value of AMIC relative to other cartilage repair procedures and to the natural course remains undefined.

LEVEL OF EVIDENCE

Case series, Level IV.

We still have a long way to go to effectively deliver genes!

Gene therapy is emerging as a revolutionary alternative to conventional therapeutic approaches. However, its clinical application is still hampered by the lack of safe and effective gene delivery techniques. Among the plethora of diverse approaches used to ferry nucleic acids into target cells, non-viral vectors represent promising and safer alternatives to viruses and physical techniques. Both cationic lipids and polymers spontaneously wrap and shrink the genetic material in complexes named lipoplexes and polyplexes, respectively, thereby protecting it and shielding its negative charges. The development of non-viral vectors commenced more than two decades ago. Since then, some major classes of interesting molecules have been identified and modified to optimize their properties. However, the way towards the final goal of gene delivery, i.e. protein expression or gene silencing, is filled with obstacles and current non-viral carriers still have concerns about their overall efficiency. We strongly believe that the future of non-viral gene delivery relies on the development of multifunctional vectors specifically tailored with diverse functionalities that act more like viruses. Although these vectors are still a long way from clinical practice they are the ideal platform to effectively shuttle the genetic material to target cells in a safe and controlled way. In this review, after briefly introducing the basis of gene delivery and therapeutic applications we discuss the main polymeric and lipidic vectors utilized for gene delivery, focusing on the strategies adopted to overcome the major weaknesses inherent to their still limited activity, on the way towards ideal multifunctional vectors.

MACI - a new era?

Full thickness articular cartilage defects have limited regenerative potential and are a significant source of pain and loss of knee function. Numerous treatment options exist, each with their own advantages and drawbacks. The goal of this review is to provide an overview of the problem of cartilage injury, a brief description of current treatment options and outcomes, and a discussion of the current principles and technique of Matrix-induced Autologous Chondrocyte Implantation (MACI). While early results of MACI have been promising, there is currently insufficient comparative and long-term outcome data to demonstrate superiority of this technique over other methods for cartilage repair.