Histological review of the human cellular cementum with special reference to an alternating lamellar pattern

Investigating the surface topography of human acellular and cellular tooth cementum by atomic force microscopy

INTRODUCTION

Dental cementum plays a key role in maintaining the health and functional integrity of teeth throughout an individual's life. While different cementum types are distinguished according to location and function, their specific properties are not yet fully understood.

OBJECTIVE

The study aimed to compare the structural properties of different types of tooth cementum by analysing their surface texture using tapping mode atomic force microscopy (TM-AFM).

METHODS

Transverse and longitudinal sections of five anterior teeth extracted from four male individuals were prepared and analysed by TM-AFM (Core AFM) both with and without hydrochloric acid etching. The TM-AFM measurements were further analysed using the Gwyddion software to determine the roughness parameters (root mean square of height irregularities and mean roughness).

RESULTS

The acid-etched sections exhibited distinctive features with regard to fibre structure and orientation compared to the unetched sections, with fundamental differences between acellular and cellular cementum. In contrast to acellular extrinsic fibre cementum (AEFC), cellular intrinsic fibre cementum (CIFC) showed increased roughness values after acid etching, with some variability, both between teeth and between subjects. The relative percentage difference (RPD) between the cementum types varied between 11.4 % in unetched transverse sections and up to 89.8 % in etched sections. The AEFC images revealed finely branched fibres between radial Sharpey's fibre bundles.

CONCLUSION

Our results show that TM-AFM imaging combined with acid etching is a suitable technique for characterising the surface texture of different types of tooth cementum.

Tooth acellular extrinsic fibre cementum incremental lines in humans are formed by parallel branched Sharpey's fibres and not by its mineral phase

In humans, the growth pattern of the acellular extrinsic fibre cementum (AEFC) has been useful to estimate the age-at-death. However, the structural organization behind such a pattern remains poorly understood. In this study tooth cementum from seven individuals from a Mexican modern skeletal series were analyzed with the aim of unveiling the AEFC collagenous and mineral structure using multimodal imaging approaches. The organization of collagen fibres was first determined using: light microscopy, transmission electron microscopy (TEM), electron tomography, and plasma FIB scanning electron microscopy (PFIB-SEM) tomography. The mineral properties were then investigated using: synchrotron small-angle X-ray scattering (SAXS) for T-parameter (correlation length between mineral particles); synchrotron X-ray diffraction (XRD) for L-parameter (mineral crystalline domain size estimation), alignment parameter (crystals preferred orientation) and lattice parameters a and c; as well as synchrotron X-ray fluorescence for spatial distribution of calcium, phosphorus and zinc. Results show that Sharpey's fibres branched out fibres that cover and uncover other collagen bundles forming aligned arched structures that are joined by these same fibres but in a parallel fashion. The parallel fibres are not set as a continuum on the same plane and when they are superimposed project the AEFC incremental lines due to the collagen birefringence. The orientation of the apatite crystallites is subject to the arrangement of the collagen fibres, and the obtained parameter values along with the elemental distribution maps, revealed this mineral tissue as relatively homogeneous. Therefore, no intrinsic characteristics of the mineral phase could be associated with the alternating AEFC incremental pattern.

Acellular Extrinsic Fiber Cementum Is Invariably Present in the Superficial Layer of Apical Cementum in Mouse Molar

The cementum is a highly mineralized tissue that covers the tooth root. The regional differences among the types of cementum, especially in the extrinsic fibers that contribute to tooth support, remain controversial. Therefore, this study used second harmonic generation imaging in conjunction with automated collagen extraction and image analysis algorithms to facilitate the quantitative examination of the fiber characteristics and the changes occurring in these fibers over time. Acellular extrinsic fiber cementum (AEFC) was invariably observed in the superficial layer of the apical cementum in mouse molars, indicating that this region of the cementum plays a crucial role in supporting the tooth. The apical AEFC exhibited continuity and fiber characteristics comparable with the cervical AEFC, suggesting a common cellular origin for their formation. The cellular intrinsic fiber cementum present in the inner layer of the apical cementum showed consistent growth in the apical direction without layering. This study highlights the dynamic nature of the cementum in mouse molars and underscores the requirement for re-examining its structure and roles. The findings of the present study elucidate the morphophysiological features of cementum and have broader implications for the maintenance of periodontal tissue health.

DNA identification from dental pulp and cementum

Teeth are one of the body tissues remaining after severe decomposition from which a DNA profile can be obtained to aid in human identification. Currently, the standard approach to isolate DNA from teeth requires pulverizing the entire tooth. This destructive approach compromises any further morphological or anthropological study. We report on two methods of DNA isolation that minimizes destruction of the tooth when accessing the DNA within pulp and cementum. Forty-nine teeth, removed as part of normal dental procedures, were buried for up to 92 days, with a further nine teeth acting as unburied controls. Additionally, four teeth samples collected during a forensic examination were included in this study. The two processes were: using a fine drill to access the pulp from the crown and then using endodontic files to collect the biological material; and using a sterile blade to scrape the cementum. It was found that the samples collected from the cementum had greater DNA quality compared to those samples obtained from the pulp. Microbial activity was found to play a role in the degradation of the nuclear material, reducing DNA yields from pulp. DNA profiling data from 24 loci, including 22 STR markers, indicated that multi-rooted teeth provided better DNA quantity and quality than those with a single root. The DNA quantity obtained from pulp samples of teeth which exhibited cavities was adversely affected, although this DNA loss was not from samples collected from the cementum of teeth in similar condition. Obtaining samples from DNA profiling from the cementum was found to be ideal if the morphological preservation of the tooth is required. Obtaining pathogen DNA is of interest when an occlusal approach to retrieve pulp may serve as a good alternative to prepare DNA without destruction of the tooth structure.

Incremental lines in human cellular cementum: A histological study

OBJECTIVES

Human cellular cementum has incremental lines that demarcate individual cementum lamellae. The structural and functional details of the lines remain poorly understood. This study was designed to examine human cellular cementum using light microscopy, scanning electron microscopy, and contact microradiography and to elucidate the ultrastructure of incremental lines and their significance in cellular cementogenesis.

METHODS

Longitudinal paraffin and ground sections of human mandibular molars were prepared. Paraffin sections were stained with hematoxylin, or hematoxylin and eosin, or impregnated with silver. Hematoxylin-stained sections were observed via scanning electron microscopy using NaOH maceration. Silver-impregnated sections were further stained with hematoxylin. Hematoxylin-stained ground sections were examined using contact microradiography.

RESULTS

The incremental lines were found to be collagen fibril-poor layers. The outer area of each cementum lamella consisted of highly mineralized fibrils involved in constructing an alternating lamellar structure, whereas the inner area consisted of irregularly arranged, less highly mineralized, fibrils. The incremental lines corresponded with the innermost sites of the inner area.

CONCLUSIONS

Based on the obtained findings, we suggest that cellular cementogenesis progresses as follows. (1) Cementoblasts alternate between low-to high-activity states. (2) In the earliest low-activity stage, cementoblasts generate poorly mineralized, fibril-poor, incremental lines. (3) As cementoblasts recover activity, fibril-organization and mineralization advance in the cementum. (4) In the high-activity stage, cementoblasts reach full activity and construct the highly mineralized, alternating lamellar structure. (5) Cementoblasts revert back to the low-activity stage. (6) The above processes are repeated, thus, alternately generating the incremental lines and cementum lamellae.

Emissivity evaluation of human enamel and dentin

Background: Human enamel and dentin temperatures have been assessed with non-contact infrared imaging devices for safety and diagnostic capacity and require an emissivity parameter to enable absolute temperature measurements. Emissivity is a ratio of thermal energy emitted from an object of interest, compared to a perfect emitter at a given temperature and wavelength, being dependent on tissue composition, structure, and surface texture. Evaluating the emissivity of human enamel and dentin is varied in the literature and warrants review. The primary aim of this study was to evaluate the emissivity of the external and internal surface of human enamel and dentin, free from acquired or developmental defects, against a known reference point. The secondary aim was to assess the emissivity value of natural caries in enamel and dentin.

Method: Fourteen whole human molar teeth were paired within a thermally stable chamber at 30°C. Two additional teeth (one sound and one with natural occlusal caries–ICDAS caries score 4 and radiographic score RB4) were sliced and prepared as 1-mm-thick slices and placed on a hot plate at 30°C within the chamber. A 3M Scotch Super 33 + Black Vinyl Electrical Tape was used for the known emissivity reference-point of 0.96. All samples were allowed to reach thermal equilibrium, and a FLIR SC305 infrared camera recorded the warming sequence. Emissivity values were calculated using the Tape reference point and thermal camera software.

Results: The external enamel surface mean emissivity value was 0.96 (SD 0.01, 95% CI 0.96–0.97), whereas the internal enamel surface value was 0.97 (SD 0.01, 95% CI 0.96–0.98). The internal crown-dentin mean emissivity value was 0.94 (SD 0.02, 95% CI 0.92–0.95), whereas the internal root-dentin value was 0.93 (SD 0.02, 95% CI 0.91–0.94) and the surface root-dentin had a value of 0.84 (SD 0.04, 95% CI 0.77–0.91). The mean emissivity value of the internal enamel surface with caries was 0.82 (SD 0.05, 95% CI 0.38–1.25), and the value of the internal crown-dentin with caries was 0.73 (SD 0.08, 95% CI 0.54–0.92).

Conclusion: The emissivity values of sound enamel, both internal and external, were similar and higher than those of all sound dentin types in this study. Sound dentin emissivity values diminished from the crown to the root and root surface. The lowest emissivity values were recorded in caries lesions of both tissues. This methodology can improve emissivity acquisition for comparison of absolute temperatures between studies which evaluate thermal safety concerns during dental procedures and may offer a caries diagnostic aid.

Incremental lines in human acellular tooth cementum - new insights by SEM analysis

BACKGROUND

Tooth cementum covers the surface of the root dentine and is produced and laid down in thin layers continuously throughout life. Functionally, different types of tooth cementum can be distinguished, which can be roughly divided into acellular (primary cementum) and cellular (secondary cementum) forms. One main type is acellular extrinsic fibre cementum (AEFC), which covers the cervical and middle third of the root. Light microscopic examinations of transverse sections of AEFC show lamellar patterns of alternating light and dark lines called growth or incremental lines. Following mammalian research, a seasonal rhythm of incremental line formation is also assumed in humans. Previous attempts at visualising incremental lines in the AEFC by scanning electron microscopy (SEM) were not particularly successful. The aim of the present study was to detect incremental lines in the AEFC and to analyse their underlying structure by SEM.

METHODS

For this purpose, non-embedded and resin-embedded transverse and longitudinal sections of three single-rooted teeth obtained from different patients were investigated. The thin sections were not pre-treated (e.g. by etching, grinding or coating).

RESULTS

Lamellar structures, which could be identified as incremental lines, were detectable in both transverse and longitudinal sections, with transverse orientation in the cross-section and longitudinal orientation in the longitudinal section. The lamellar pattern was created by broad fibre-rich layers alternating with narrow fibre-poor layers. The orientation of the collagen fibres changed from layer to layer from transverse to radial direction. The visibility of the layered structure discovered varied significantly.

CONCLUSIONS

The study demonstrate that it is possible, in principle, to detect incremental lines in AEFC and to identify their basic structure using SEM. Our results suggest that the density and orientation of the fibres play an essential role in the formation of incremental lines. Functional aspects seem to be of particular importance.

Ablation of Pyrophosphate Regulators Promotes Periodontal Regeneration

Biomineralization is regulated by inorganic pyrophosphate (PP_i), a potent physiological inhibitor of hydroxyapatite crystal growth. Progressive ankylosis protein (ANK) and ectonucleotide pyrophosphatase/phosphodiesterase 1 (ENPP1) act to increase local extracellular levels of PP_i, inhibiting mineralization. The periodontal complex includes 2 mineralized tissues, cementum and alveolar bone (AB), both essential for tooth attachment. Previous studies demonstrated that loss of function of ANK or ENPP1 (reducing PP_i) resulted in increased cementum formation, suggesting PP_i metabolism may be a target for periodontal regenerative therapies. To compare the effects of genetic ablation of Ank, Enpp1, and both factors concurrently on cementum and AB regeneration, mandibular fenestration defects were created in Ank knockout (Ank KO), Enpp1 mutant (Enpp1^asj/asj), and double KO (dKO) mice. Genetic ablation of Ank, Enpp1, or both factors increased cementum regeneration compared to controls at postoperative days (PODs) 15 and 30 (Ank KO: 8-fold, 3-fold; Enpp1^asj/asj: 7-fold, 3-fold; dKO: 11-fold, 4-fold, respectively) associated with increased fluorochrome labeling and expression of mineralized tissue markers, dentin matrix protein 1 (Dmp1/DMP1), osteopontin (Spp1/OPN), and bone sialoprotein (Ibsp/BSP). Furthermore, dKO mice featured increased cementum thickness compared to single KOs at POD15 and Ank KO at POD30. No differences were noted in AB volume between genotypes, but osteoblast/osteocyte markers were increased in all KOs, partially mineralized osteoid volume was increased in dKO versus controls at POD15 (3-fold), and mineral density was decreased in Enpp1^asj/asj and dKOs at POD30 (6% and 9%, respectively). Increased numbers of osteoclasts were present in regenerated AB of all KOs versus controls. These preclinical studies suggest PP_i modulation as a potential and novel approach for cementum regeneration, particularly targeting ENPP1 and/or ANK. Differences in cementum and AB regeneration in response to reduced PP_i conditions highlight the need to consider tissue-specific responses in strategies targeting regeneration of the entire periodontal complex.

Tooth-Supporting Hard Tissue Regeneration Using Biopolymeric Material Fabrication Strategies

The mineralized tissues (alveolar bone and cementum) are the major components of periodontal tissues and play a critical role to anchor periodontal ligament (PDL) to tooth-root surfaces. The integrated multiple tissues could generate biological or physiological responses to transmitted biomechanical forces by mastication or occlusion. However, due to periodontitis or traumatic injuries, affect destruction or progressive damage of periodontal hard tissues including PDL could be affected and consequently lead to tooth loss. Conventional tissue engineering approaches have been developed to regenerate or repair periodontium but, engineered periodontal tissue formation is still challenging because there are still limitations to control spatial compartmentalization for individual tissues and provide optimal 3D constructs for tooth-supporting tissue regeneration and maturation. Here, we present the recently developed strategies to induce osteogenesis and cementogenesis by the fabrication of 3D architectures or the chemical modifications of biopolymeric materials. These techniques in tooth-supporting hard tissue engineering are highly promising to promote the periodontal regeneration and advance the interfacial tissue formation for tissue integrations of PDL fibrous connective tissue bundles (alveolar bone-to-PDL or PDL-to-cementum) for functioning restorations of the periodontal complex.

The Construction of Biomimetic Cementum Through a Combination of Bioskiving and Fluorine-Containing Biomineralization

Despite tremendous attention is given to the construction of biomimetic cementum for regeneration of tooth cementum, the lack of recapitulating the composition and hierarchical structure of cementum often leads to the poor performance of constructed materials. How to highly mimic the sophisticated composition and hierarchy of cementum remains a longstanding challenge in constructing the biomimetic cementum. Inspired by cementum formation process, a novel construction approach via a combination of bioskiving and fluorine-containing biomineralization is developed in this study. The alternative collagen lamellae (ACL) that can highly mimic the rotated plywood structure of cementum collagen matrix is fabricated via bioskiving. Followed by biomineralization in the amorphous calcium phosphate (ACP) solution with different concentration of fluorine, a series of biomimetic cementum is constructed. Screened by physicochemical characterization, the biomimetic cementum with the composition and hierarchical structure highly similar to human cementum is selected. Through in vitro biological assay, this biomimetic cementum is proven to significantly promote the adhesion, proliferation, and cementogenic differentiation of periodontal ligament cells (PDLCs). Furthermore, in vivo study demonstrates that biomimetic cementum could induce cementogenesis. This biomimetic cementum constructed via combinatory application of bioskiving and fluorine-containing biomineralization stands as a promising candidate for achieving cementum regeneration.

Incremental distribution of strontium and zinc in great ape and fossil hominin cementum using synchrotron X-ray fluorescence mapping

Cementum and the incremental markings it contains have been widely studied as a means of ageing animals and retrieving information about diet and nutrition. The distribution of trace elements in great ape and fossil hominin cementum has not been studied previously. Synchrotron X-ray fluorescence (SXRF) enables rapid scanning of large tissue areas with high resolution of elemental distributions. First, we used SXRF to map calcium, phosphorus, strontium and zinc distributions in great ape dentine and cementum. At higher resolution, we compared zinc and strontium distributions in cellular and acellular cementum in regions where clear incremental markings were expressed. We then mapped trace element distributions in fossil hominin dentine and cementum from the 1.55-1.65 million year old site of Koobi Fora, Kenya. Zinc, in particular, is a precise marker of cementum increments in great apes, and is retained in fossil hominin cementum, but does not correspond well with the more diffuse fluctuations observed in strontium distribution. Cementum is unusual among mineralized tissues in retaining so much zinc. This is known to reduce the acid solubility of hydroxyapatite and so may confer resistance to resorption by osteoclasts in the dynamic remodelling environment of the periodontal ligament and alveolar bone.

Heterogeneous Human Periodontal Ligament-Committed Progenitor and Stem Cell Populations Exhibit a Unique Cementogenic Property Under In Vitro and In Vivo Conditions

An undesirable complication that arises during dental treatments is external apical-root resorption, which causes root-cementum and root-dentin loss. To induce de novo cementogenesis, stem cell therapy is required. Cementum-forming cells (cementoblasts) are known to be differentiated from periodontal-lineage mesenchymal stem cells (MSCs), which are derived from the dental follicle (DF) in developing tissues and the periodontal ligament (PDL) in adult tissues, but the periodontal-lineage MSC type that is optimal for inducing de novo cementogenesis remains unidentified, as does the method to isolate these cells from harvested tissues. Thus, we investigated the cementogenic potential of DF- and PDL-derived MSCs that were isolated by using two widely used cell-isolation methods: enzymatic digestion and outgrowth (OG) methods. DF- and PDL-derived cells isolated by using both methods proliferated actively, and all four isolated cell types showed MSC gene/protein expression phenotype and ability to differentiate into adipogenic and chondrogenic lineages. Furthermore, cementogenic-potential analysis revealed that all cell types produced alizarin red S-positive mineralized materials in in vitro cultures. However, PDL-OG cells presented unique cementogenic features, such as nodular formation of mineralized deposits displaying a cellular intrinsic fiber cementum-like structure, as well as a higher expression of cementoblast-specific genes than in the other cell types. Moreover, in in vivo transplantation experiments, PDL-OG cells formed cellular cementum-like hard tissue containing embedded osteocalcin-positive cells, whereas the other cells formed acellular cementum-like materials. Given that the root-cementum defect is likely regenerated through cellular cementum deposition, PDL-OG cell-based therapies might potentially facilitate the de novo cellular cementogenesis required for regenerating the root defect.

New Insights on the Composition and the Structure of the Acellular Extrinsic Fiber Cementum by Raman Analysis

Acellular extrinsic fiber cementum is a mineralized tissue that covers the cervical half of the tooth root surface. It contains mainly extrinsic or Sharpey's fibers that run perpendicular to the root surface to anchor the tooth via the periodontal ligament. Acellular cementum is continuously and slowly produced throughout life and exhibits an alternating bright and dark pattern under light microscopy. However, although a better understanding of the structural background of acellular cementum is relevant to many fields, such as cementochronology, periodontology and tissue engineering, acellular cementum remains rarely studied and poorly understood. In this work, we studied the acellular cementum at the incremental line scale of five human mandibular canines using polarized Raman spectroscopy. We provided Raman imaging analysis and polarized acquisitions as a function of the angular orientation of the sample. The results showed that mineral crystals were always parallel to collagen fibrils, and at a larger scale, we proposed an organizational model in which we found radial collagen fibers, "orthogonal" to the cementum surface, and "non-orthogonal" fibers, which consist of branching and bending radial fibers. Concerning the alternating pattern, we observed that the dark lines corresponded to smaller, more mineralized and probably more organized bands, which is consistent with the zoological assumption that incremental lines are produced during a winter rest period of acellular cementum growth.

Histology of human cementum: Its structure, function, and development

Cementum was first demonstrated by microscopy, about 180 years ago. Since then the biology of cementum has been investigated by the most advanced techniques and equipment at that time in various fields of dental sciences. A great deal of data on cementum histology have been accumulated. These data have been obtained from not only human, but also non-human animals, in particular, rodents such as the mouse and rat. Although many dental histologists have reviewed histology of human cementum, some descriptions are questionable, probably due to incorrect comparison of human and rodent cementum. This review was designed to introduce current histology of human cementum, i.e. its structure, function, and development and to re-examine the most questionable and controversial conclusions made in previous reports.

Calcium orthophosphates (CaPO4): occurrence and properties

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates (CaPO4). This type of materials is of the special significance for the human beings because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (i.e., those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with CaPO4, while dental caries and osteoporosis mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenorthophosphates. Therefore, the processes of both normal and pathological calcifications are just an in vivo crystallization of CaPO4. Similarly, dental caries and osteoporosis might be considered as in vivo dissolution of CaPO4. In addition, natural CaPO4 are the major source of phosphorus, which is used to produce agricultural fertilizers, detergents and various phosphorus-containing chemicals. Thus, there is a great significance of CaPO4 for the humankind and, in this paper, an overview on the current knowledge on this subject is provided.

Toward the adoption of cementochronology in forensic context

Because acellular dental cementum is considered to be formed continually throughout life and to not undergo remodeling processes, cementochronology is considered to be a method with the potential for directly assessing chronological age. Considering that most previous studies on humans have assumed the superior performance of this method, it is surprising that this technique is not more widely adopted in anthropology. To understand this controversy, we highlight that there is no standardized procedure for sample preparation. The numerous technical approaches that exist impact the reliability of the method, and the recent creation of an international work group (Cementochronology Research Program) demonstrates the need for researchers to share their experience to overcome these obstacles. This paper aims to address this paradox by debating the aspects that contribute to the limited use of this method and by illustrating its potential through an application on forensic cases. A protocol, which was recently certified according to the ISO-9001, was applied to nine anthropological cases from the Forensic Medicine Institute of Lille (northern France) and compared with routine osteological and dental methods. The results show that traditional methods matched the known age due to the wide extent of their range, while the accuracy and precision of cementochronological estimates was also notable. This paper establishes that cementochronology may serve as a particularly important tool for age estimation for forensic anthropologists and should, at least, be used in addition to other methods.

Adaptive properties of human cementum and cementum dentin junction with age

OBJECTIVES

The objective of this study was to evaluate age related changes in physical (structure/mechanical properties) and chemical (elemental/inorganic mineral content) properties of cementum layers interfacing dentin.

METHODS

Human mandibular molars (N=43) were collected and sorted by age (younger=19-39, middle=40-60, older=61-81 years). The structures of primary and secondary cementum (PC, SC) types were evaluated using light and atomic force microscopy (AFM) techniques. Chemical composition of cementum layers were characterized through gravimetric analysis by estimating ash weight and concentrations of Ca, Mn, and Zn trace elements in the analytes through inductively coupled plasma mass spectroscopy. The hardness of PC and SC was determined using microindentation and site-specific reduced elastic modulus properties were determined using nanoindentation techniques.

RESULTS

PC contained fibrous 1-3 µm wide hygroscopic radial PDL-inserts. SC illustrated PC-like structure adjacent to a multilayered architecture composing of regions that contained mineral dominant lamellae. The width of the cementum dentin junction (CDJ) decreased as measured from the cementum enamel junction (CEJ) to the tooth apex (49-21 µm), and significantly decreased with age (44-23 µm; p<0.05). The inorganic ratio defined as the ratio of post-burn to pre-burn weight increased with age within primary cementum (PC) and secondary cementum (SC). Cementum showed an increase in hardness with age (PC (0.40-0.46 GPa), SC (0.37-0.43 GPa)), while dentin showed a decreasing trend (coronal dentin (0.70-0.72 GPa); apical dentin (0.63-0.73 GPa)).

SIGNIFICANCE

The observed physicochemical changes are indicative of increased mineralization of cementum and CDJ over time. Changes in tissue properties of teeth can alter overall tooth biomechanics and in turn the entire bone-tooth complex including the periodontal ligament. This study provides baseline information about the changes in physicochemical properties of cementum with age, which can be identified as adaptive in nature.

Targeted sampling of cementum for recovery of nuclear DNA from human teeth and the impact of common decontamination measures

Background

Teeth are a valuable source of DNA for identification of fragmented and degraded human remains. While the value of dental pulp as a source of DNA is well established, the quantity and presentation of DNA in the hard dental tissues has not been extensively studied. Without this knowledge common decontamination, sampling and DNA extraction techniques may be suboptimal. Targeted sampling of specific dental tissues could maximise DNA profiling success, while minimising the need for laborious sampling protocols and DNA extraction techniques, thus improving workflows and efficiencies. We aimed to determine the location of cellular DNA in non-degraded human teeth to quantify the yield of nuclear DNA from cementum, the most accessible and easily sampled dental tissue, and to investigate the effect of a common decontamination method, treatment with sodium hypochlorite (bleach).

We examined teeth histologically and subsequently quantified the yield of nuclear DNA from the cementum of 66 human third molar teeth. We also explored the effects of bleach (at varying concentrations and exposure times) on nuclear DNA within teeth, using histological and quantitative PCR methods.

Results

Histology confirmed the presence of nucleated cells within pulp and cementum, but not in dentine. Nuclear DNA yields from cementum varied substantially between individuals but all samples gave sufficient DNA (from as little as 20 mg of tissue) to produce full short tandem repeat (STR) profiles. Variation in yield between individuals was not influenced by chronological age or sex of the donor. Bleach treatment with solutions as dilute as 2.5% for as little as 1 min damaged the visible nuclear material and reduced DNA yields from cementum by an order of magnitude.

Conclusions

Cementum is a valuable, and easily accessible, source of nuclear DNA from teeth, and may be a preferred source where large numbers of individuals need to be sampled quickly (for example, mass disaster victim identification) without the need for specialist equipment or from diseased and degraded teeth, where pulp is absent. Indiscriminant sampling and decontamination protocols applied to the outer surface of teeth can destroy this DNA, reducing the likelihood of successful STR typing results.

Teeth as a source of DNA for forensic identification of human remains: a review

Teeth and bones are frequently the only sources of DNA available for identification of degraded or fragmented human remains. The unique composition of teeth and their location in the jawbone provide additional protection to DNA compared to bones making them a preferred source of DNA in many cases. Despite this, post-mortem changes in the structure and composition of teeth, and the location and diagenesis of DNA within them are poorly understood. This review summarises current knowledge of tooth morphology with respect to DNA content and preservation, and discusses the way in which post-mortem changes will affect the recovery of DNA from teeth under a range of commonly used extraction protocols. We highlight the benefits and pitfalls of using specific tooth tissues for DNA extraction and make recommendations for tooth selection and sampling that will maximise DNA typing success. A comprehensive understanding of tooth structure and an appreciation of the relationship between DNA and mineralized tissues in post-mortem teeth are critical for optimal sample selection. More informed sampling methods that target specific tooth tissues will increase the likelihood of successful genetic analysis and allow for efficient and timely missing persons case work and disaster victim identification response.

Cementum status in natural teeth opposing implant-borne bridgework in Macaca fascicularis

OBJECTIVE

The objective of this study was to investigate the cementum status in natural teeth opposing implant-supported bridgework.

METHODS

Maxillary premolars and molars opposing immediate-loading (IL) and delayed-loading (DL) mandibular implant-supported bridgework in 4 Macaca fascicularis were harvested after 3 months of functional loading. Another 2 monkeys without mandibular fixed prostheses served as control. The cervical (CCW) and apical cementum width (ACW), and resorption craters (RCs) were measured.

RESULTS

No significant differences were observed between test and control groups for mean CCW (control = 26.79 ± 3.28, IL = 21.29 ± 9.12, and DL = 20.32 ± 5.65 μm) and for ACW (control = 937.97 ± 353.74, IL = 955.26 ± 720.05, and DL = 750.56 ± 517.26 μm) (P > .05). In test and control monkeys, RCs were uncommon and showed no significant differences in width (control = 0.71 ± 0.38, IL = 1.02 ± 0.49, DL = 0.85 ± 1.02 mm) and depth (control = 0.15 ± 0.07, IL = 0.25 ± 0.40, DL = 0.22 ± 0.15 mm) (P > .05).

CONCLUSIONS

Present findings suggest that implant-supported bridgework does not produce any adverse effects on the cementum of opposing natural teeth after 3 months of functional loading.

Calcium orthophosphates: occurrence, properties, biomineralization, pathological calcification and biomimetic applications

The present overview is intended to point the readers' attention to the important subject of calcium orthophosphates. This type of materials is of special significance for human beings, because they represent the inorganic part of major normal (bones, teeth and antlers) and pathological (i.e., those appearing due to various diseases) calcified tissues of mammals. For example, atherosclerosis results in blood vessel blockage caused by a solid composite of cholesterol with calcium orthophosphates, while dental caries and osteoporosis mean a partial decalcification of teeth and bones, respectively, that results in replacement of a less soluble and harder biological apatite by more soluble and softer calcium hydrogenphosphates. Therefore, the processes of both normal and pathological calcifications are just an in vivo crystallization of calcium orthophosphates. Similarly, dental caries and osteoporosis might be considered an in vivo dissolution of calcium orthophosphates. Thus, calcium orthophosphates hold a great significance for humankind, and in this paper, an overview on the current knowledge on this subject is provided.