Effect of titanium surface topographies on human bone marrow stem cells differentiation in vitro

Influence of the Surface Topography of Titanium Dental Implants on the Behavior of Human Amniotic Stem Cells

The dental implant surface plays a crucial role in osseointegration. The topography and physicochemical properties will affect the cellular functions. In this research, four distinct titanium surfaces have been studied: machined acting (MACH), acid etched (AE), grit blasting (GBLAST), and a combination of grit blasting and subsequent acid etching (GBLAST + AE). Human amniotic mesenchymal (hAMSCs) and epithelial stem cells (hAECs) isolated from the amniotic membrane have attractive stem-cell properties. They were cultured on titanium surfaces to analyze their impact on biological behavior. The surface roughness, microhardness, wettability, and surface energy were analyzed using interferometric microscopy, Vickers indentation, and drop-sessile techniques. The GBLAST and GBLAST + AE surfaces showed higher roughness, reduced hydrophilicity, and lower surface energy with significant differences. Increased microhardness values for GBLAST and GBLAST + AE implants were attributed to surface compression. Cell viability was higher for hAMSCs, particularly on GBLAST and GBLAST + AE surfaces. Alkaline phosphatase activity enhanced in hAMSCs cultured on GBLAST and GBLAST + AE surfaces, while hAECs showed no mineralization signals. Osteogenic gene expression was upregulated in hAMSCs on GBLAST surfaces. Moreover, α2 and β1 integrin expression enhanced in hAMSCs, suggesting a surface-integrin interaction. Consequently, hAMSCs would tend toward osteoblastic differentiation on grit-blasted surfaces conducive to osseointegration, a phenomenon not observed in hAECs.

Protein absorption on titanium surfaces treated with a high-power laser: A systematic review

STATEMENT OF PROBLEM

The surface of titanium dental implants treated with a high-power laser has been reported to favor osseointegration, mainly by altering protein uptake. Despite the large number of articles that address the topic, the heterogeneity of methodologies and results makes an understanding of the treatment's benefits difficult, and a systematic review is needed.

PURPOSE

The purpose of this systematic review was to further the knowledge on protein uptake on titanium surfaces that have undergone treatment with a high-power laser.

MATERIAL AND METHODS

This review followed the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines and was registered with the Open Science Framework (OSF) (osf.io/gcbna). Searches were performed in PubMed, Scopus, Web of Science, Embase, and Google Scholar databases. The articles were selected in 2 steps by 2 independent reviewers according to the previously selected eligibility criteria. The risk of bias was analyzed by using the Joanna Briggs Institute (JBI)-adapted quasi-experimental study evaluation tool.

RESULTS

The studies addressed have shown that applying a high-power laser to the implant surface, depending on its settings, generates topographical changes that can optimize the protein absorption process and thus accelerate the other biological processes.

CONCLUSIONS

The studies identified in this systematic review showed that surface treatment with a high-power laser represents a promising technique with a positive influence on protein uptake and osseointegration.

Infrared diode laser enhances human periodontal ligament stem cells behaviour on titanium dental implants

Low level laser treatment (LLLT) is known for its photobiostimulatory and photobiomodulatory characteristics, which stimulate cell proliferation, increase cellular metabolism, and improve cellular regeneration. The objective of the present research was to assess the possible influence of infrared diode laser irradiation on the behaviour, attachment, and osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs) seeded on different types of dental implants. Two distinct types of implants, one subjected to laser surface treatment and the other treated with acid etching, were longitudinally divided into two halves and submerged in six wells culture plates. Both implants were subjected to infrared diode laser treatment, and subsequently, the morphology and attachment of cells were examined using scanning electron microscopy (SEM) after 14 and 21 days. The behaviour of (hPDLSCs) towards two types of implants, when exposed to osteogenic medium and low-level laser therapy (LLLT), was assessed using quantitative real-time polymerase chain reaction to measure the expression of stemness markers and osteogenic markers. The scanning electron microscopy (SEM) demonstrated that the application of infrared diode laser irradiation substantially improved the attachment of cells to both types of implants. The stemness gene markers were significantly down regulated in cells seeded on both surfaces when challenged with osteogenic media in relation to control. At 14 days, early osteogenic markers, were upregulated, while late osteogenic markers, were downregulated in both challenged groups. At the 21-day mark, hPDLSCs seeded on an acid-etched implant exhibited increased expression of all osteogenic markers in response to stimulation with osteogenic media and infra-red diode laser, in contrast to hPDLSCs seeded on a laser surface treated implant under the same conditions. Finally, the findings of our research revealed that when subjected to infrared diode laser, human periodontal ligament stem cells cultured on both types of implants demonstrated improved cellular attachment and differentiation. This suggested that infrared diode laser enhanced the activity of the cells surrounding the implants. Hence, the use of infrared diode laser could be pivotal in improving and expediting the clinical osseointegration process around dental implants.

Theoretical modeling approach for adsorption of fibronectin on the nanotopographical implants

The success of orthopedic implants depends on the sufficient integration between tissue and implant, which is influenced by the cellular responses to their microenvironment. The conformation of adsorbed extracellular matrix is crucial for cellular behavior instruction via manipulating the physiochemical features of materials. To investigate the electrostatic adsorption mechanism of fibronectin on nanotopographies, a theoretical model was established to determine surface charge density and Coulomb's force of nanotopography - fibronectin interactions using a Laplace equation satisfying the boundary conditions. Surface charge density distribution of nanotopographies with multiple random fibronectin was simulated based on random number and Monte Carlo hypothesis. The surface charge density on the nanotopographies was compared to the experimental measurements, to verify the effectiveness of the theoretical model. The model was implemented to calculate the Coulomb force generated by nanotopographies to compare the fibronectin adsorption. This model has revealed the multiple random quantitative fibronectin electrostatic adsorption to the nanotopographies, which is beneficial for orthopedic implant surface design.Significance: The conformation and distribution of adsorbed extracellular matrix on biomedical implants are crucial for directing cellular behaviors. However, the Ti nanotopography-ECM interaction mechanism remains largely unknown. This is mostly because of the interactions that are driven by electrostatic force, and any experimental probe could interfere with the electric field between the charged protein and Ti surface. A theoretical model is hereby proposed to simulate the adsorption between nanotopographies and fibronectin. Random number and Monte Carlo hypothesis were applied for multiple random fibronectin simulation, and the Coulomb's force between nanoconvex and nanoconcave structures was comparatively analyzed.

Osseointegration of Sandblasted and Acid-Etched Implant Surfaces. A Histological and Histomorphometric Study in the Rabbit

Titanium surface is an important factor in achieving osseointegration during the early wound healing of dental implants in alveolar bone. The purpose of this study was to evaluate sandblasted-etched surface implants to investigate the osseointegration. In the present study, we used two different types of sandblasted-etched surface implants, an SLA™ surface and a Nanoblast Plus™ surface. Roughness and chemical composition were evaluated by a white light interferometer microscope and X-ray photoelectron spectroscopy, respectively. The SLA™ surface exhibited the higher values (Ra 3.05 μm) of rugosity compared to the Nanoblast Plus™ surface (Ra 1.78 μm). Both types of implants were inserted in the femoral condyles of ten New Zealand white rabbits. After 12 weeks, histological and histomorphometric analysis was performed. All the implants were osseointegrated and no signs of infection were observed. Histomorphometric analysis revealed that the bone–implant contact % (BIC) ratio was similar around the SLA™ implants (63.74 ± 13.61) than around the Nanoblast Plus™ implants (62.83 ± 9.91). Both implant surfaces demonstrated a favorable bone response, confirming the relevance of the sandblasted-etched surface on implant osseointegration.

Approaches to promoting bone marrow mesenchymal stem cell osteogenesis on orthopedic implant surface

Bone marrow-derived mesenchymal stem cells (BMSCs) play a critical role in the osseointegration of bone and orthopedic implant. However, osseointegration between the Ti-based implants and the surrounding bone tissue must be improved due to titanium’s inherent defects. Surface modification stands out as a versatile technique to create instructive biomaterials that can actively direct stem cell fate. Here, we summarize the current approaches to promoting BMSC osteogenesis on the surface of titanium and its alloys. We will highlight the utilization of the unique properties of titanium and its alloys in promoting tissue regeneration, and discuss recent advances in understanding their role in regenerative medicine. We aim to provide a systematic and comprehensive review of approaches to promoting BMSC osteogenesis on the orthopedic implant surface.

Comparative evaluation among laser-treated, machined, and sandblasted/acid-etched implant surfaces: an in vivo histologic analysis on sheep

Purpose

The aim of the present in vivo analysis was to evaluate the osseointegration process of titanium implants with three different surfaces (machined, sandblasted and acid-etched, and laser-treated) after 15 and 30 days of healing period.

Materials and methods

Thirty-six implants with different surfaces were placed in the iliac crest of four Bergamasca sheep. The implant surfaces tested were sandblasted and acid-etched (group A), laser-treated (group B), and fully machined (group C). Two animals were sacrificed after 15 days while the other two after 30 days. Histological and histomorphometric analyses were performed.

Results

After 30 days, the bone tissue layer onto implant groups A and B appeared almost continuous with small marrow spaces interruption, while on the machined surface (group C), larger spaces with marrow tissue alternated with the bony trabeculae onto the titanium surface. Implants in groups A and B showed significantly higher implant contact percentage (BIC%) value than group C (P < 0.05). Moreover, it was observed a BIC% increase in both groups A and B between 15 and 30 days while in the machined group (group C), the BIC% decreased.

Conclusion

Results from the present in vivo analysis revealed that both sandblasted/acid-etched and laser-treated titanium implants, compared to the machined ones, have higher values of osseointegration in less healing time.

Vertical ridge augmentation using guided bone regeneration procedure and dental pulp derived mesenchymal stem cells with simultaneous dental implant placement: A histologic study in a sheep model

OBJECTIVES

To determine the effects of bone graft and dental pulp derived mesenchymal stem cells (DPMSCs) implantation with simultaneous dental implant placement on osteointegration, newly formed bone and vertical bone height histologically and histomorphometrically in a sheep model.

MATERIAL AND METHODS

A total of 48 implants were divided into three groups. In Group I (n = 16), no material was placed around the implants. In Group II (n = 16), particulate deproteinized bovine bone graft (DBBG) was placed around the implant and in Group III (n = 16), 2 × 106 DPMSCs were placed around the implant with DBBG. All implants were covered with a 20 × 30 mm collagen membrane and the edges of the membrane were fixed with mini screws. The animals were sacrificed 3 and 6 weeks after surgery. Histologic and histomorphometric assessments were performed.

RESULTS

The area of newly formed bone in Groups I, II, and III were calculated as percentage 2.15 ± 0.22, 11.88 ± 0.77, and 14.50 ± 0.67 respectively after 3 weeks and 3.33 ± 0.37, 18.45 ± 0.33, and 29 ± 1.07 after 6 weeks, respectively (P < 0.05). Three weeks after dental implant placement, the vertical bone length was 0.17 ± 0.02 mm in Group I, 0.89 ± 0.068 mm in Group II and 0.96 ± 0.05 mm in Group III. After 6 weeks, these values were 0.28 ± 0.03 mm, 1.34 ± 0.08 mm, and 1.49 ± 0.08 mm, respectively. There was no significant difference between Groups II and III at 3 and 6 weeks in terms of vertical bone length.

CONCLUSION

Bone graft and DPMSCs application with dental implant have beneficial effects on newly formed bone and vertical bone height in this experimental sheep model.

A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance

The emerging field of nanostructured implants has enormous scope in the areas of medical science and dental implants. Surface nanofeatures provide significant potential solutions to medical problems by the introduction of better biomaterials, improved implant design, and surface engineering techniques such as coating, patterning, functionalization and molecular grafting at the nanoscale. This review is of an interdisciplinary nature, addressing the history and development of dental implants and the emerging area of nanotechnology in dental implants. After a brief introduction to nanotechnology in dental implants and the main classes of dental implants, an overview of different types of nanomaterials (i.e. metals, metal oxides, ceramics, polymers and hydrides) used in dental implant together with their unique properties, the influence of elemental compositions, and surface morphologies and possible applications are presented from a chemical point of view. In the core of this review, the dental implant materials, physical and chemical fabrication techniques and the role of nanotechnology in achieving ideal dental implants have been discussed. Finally, the critical parameters in dental implant design and available data on the current dental implant surfaces that use nanotopography in clinical dentistry have been discussed.

Fibroblast and keratinocyte gene expression following exposure to the extracts of holy basil plant (Ocimum tenuiflorum), malabar nut plant (Justicia adhatoda), and emblic myrobalan plant (Phyllanthus emblica)

This data article provides gene expression profiles, determined by using real-time PCR, of fibroblasts and keratinocytes treated with 0.01% and 0.001% extracts of holy basil plant (Ocimum tenuiflorum), sri lankan local name “maduruthala”, 0.1% and 0.01% extracts of malabar nut plant (Justicia adhatoda), sri lankan local name “adayhoda” and 0.003% and 0.001% extracts of emblic myrobalan plant (Phyllanthus emblica), sri lankan local name “nelli”, harvested in Sri Lanka. For fibroblasts, the dataset includes expression profiles for genes encoding hyaluronan synthase 1 (HAS1), hyaluronan synthase 2 (HAS2), hyaluronidase-1 (HYAL1), hyaluronidase-2 (HYAL2), versican, aggrecan, CD44, collagen, type I, alpha 1 (COL1A1), collagen, type III, alpha 1 (COL3A1), collagen, type VII, alpha 1 (COL7A1), matrix metalloproteinase 1 (MMP1), acid ceramidase, basic fibroblast growth factor (bFGF), fibroblast growth factor-7 (FGF7), vascular endothelial growth factor (VEGF), interleukin-1 alpha (IL-1α), cyclooxygenase-2 (cox2), transforming growth factor beta (TGF-β), and aquaporin 3 (AQP3). For keratinocytes, the expression profiles are for genes encoding HAS1, HAS2, HYAL1, HYAL2, versican, CD44, IL-1α, cox2, TGF-β, AQP3, Laminin5, collagen, type XVII, alpha 1 (COL17A1), integrin alpha-6 (ITGA6), ceramide synthase 3 (CERS3), elongation of very long chain fatty acids protein 1 (ELOVL1), elongation of very long chain fatty acids protein 4 (ELOVL4), filaggrin (FLG), transglutaminase 1 (TGM1), and keratin 1 (KRT1). The expression profiles are provided as bar graphs.

Fibroblast and keratinocyte gene expression following exposure to extracts of neem plant (Azadirachta indica)

This data article provides gene expression profiles, determined by using real-time PCR, of fibroblasts and keratinocytes treated with 0.01% and 0.001% extracts of neem plant (Azadirachta indica), local name “Kohomba” in Sri Lanka, harvested in Sri Lanka. For fibroblasts, the dataset includes expression profiles for genes encoding hyaluronan synthase 1 (HAS1), hyaluronan synthase 2 (HAS2), hyaluronidase-1 (HYAL1), hyaluronidase-2 (HYAL2), versican, aggrecan, CD44, collagen, type I, alpha 1 (COL1A1), collagen, type III, alpha 1 (COL3A1), collagen, type VII, alpha 1 (COL7A1), matrix metalloproteinase 1 (MMP1), acid ceramidase, basic fibroblast growth factor (bFGF), fibroblast growth factor-7 (FGF7), vascular endothelial growth factor (VEGF), interleukin-1 alpha (IL-1α), cyclooxygenase-2 (cox2), transforming growth factor beta (TGF-β), and aquaporin 3 (AQP3). For keratinocytes, the expression profiles are for genes encoding HAS1, HAS2, HYAL1, HYAL2, versican, CD44, IL-1α, cox2, TGF-β, AQP3, Laminin5, collagen, type XVII, alpha 1 (COL17A1), integrin alpha-6 (ITGA6), ceramide synthase 3 (CERS3), elongation of very long chain fatty acids protein 1 (ELOVL1), elongation of very long chain fatty acids protein 4 (ELOVL4), filaggrin (FLG), transglutaminase 1 (TGM1), and keratin 1 (KRT1). The expression profiles are provided as bar graphs.

Laser-modified titanium surfaces enhance the osteogenic differentiation of human mesenchymal stem cells

Background

Titanium surfaces have been modified by various approaches with the aim of improving the stimulation of osseointegration. Laser beam (Yb-YAG) treatment is a controllable and flexible approach to modifying surfaces. It creates a complex surface topography with micro and nano-scaled patterns, and an oxide layer that can improve the osseointegration of implants, increasing their usefulness as bone implant materials.

Methods

Laser beam irradiation at various fluences (132, 210, or 235 J/cm²) was used to treat commercially pure titanium discs to create complex surface topographies. The titanium discs were investigated by scanning electron microscopy, X-ray diffraction, and measurement of contact angles. The surface generated at a fluence of 235 J/cm² was used in the biological assays. The behavior of mesenchymal stem cells from an umbilical cord vein was evaluated using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, a mineralization assay, and an alkaline phosphatase activity assay and by carrying out a quantitative real-time polymerase chain reaction for osteogenic markers. CHO-k1 cells were also exposed to titanium discs in the MTT assay.

Results

The best titanium surface was that produced by laser beam irradiation at 235 J/cm² fluence. Cell proliferation analysis revealed that the CHO-k1 and mesenchymal stem cells behaved differently. The laser-processed titanium surface increased the proliferation of CHO-k1 cells, reduced the proliferation of mesenchymal stem cells, upregulated the expression of the osteogenic markers, and enhanced alkaline phosphatase activity.

Conclusions

The laser-treated titanium surface modulated cellular behavior depending on the cell type, and stimulated osteogenic differentiation. This evidence supports the potential use of laser-processed titanium surfaces as bone implant materials, and their use in regenerative medicine could promote better outcomes.

Effects of surface microtopography of titanium disks on cell proliferation and differentiation of osteoblast-like cells isolated from rat calvariae

The surface topography of implant fixture is an important factor affecting the osseointegration. We herein demonstrated the effects of surface microtopography of titanium disks on proliferation and differentiation of osteoblast-like cells isolated from rat calvariae. Titanium disks with machine surface (MS), rough surface (R1) and rough surface combined with small cavities (R2) were used in an in vitro culture system. Rough surfaces (R1 and R2 disks) induced stronger osteoblast proliferation and differentiation (BGP and sclerostin mRNA expressions and calcium content) than the smooth surface (MS disk). Furthermore, surface microtopography of R2 disk, which was rough with small cavities, more strongly induced cell proliferation and mineralized bone matrix production than R1 disk. Our results suggest that surface microtopography influences osteoblast proliferation and differentiation. R2 disk, which is rough with small cavities, may be used in implant fixtures to increase osseointegration.

Gene Expression of Human Mesenchymal Stem Cells Cultured on Titanium Dental Implant Surfaces

OBJECTIVE

The study shows how the influence of titanium surfaces on human mesenchymal stem cells differentiates toward osteocytes lineage and how, after growth, on machined titanium disk or etched titanium disk, changes, in gene expression for RUNX1, CTNNB1, SP7, and DLX5.

METHODS

Genes were analyzed by means of quantitative real-time polimerase chain reaction. Osseo genic lineage differentiation was also tested by means of the catenin-β1 immunofluorescence, induced osteoblasts, which represented the internal control.

RESULTS

The RUNX1 and SP7 expressions in the induced osteoblasts prove to be different, compared with cells cultured on metallic supports. Moreover, the levels of expression of the runt-related transcription factor 1 and the osterix appeared more down-regulated in cells that grew on a machined titanium surface. In the present experimental model, mRNA expression of DLX5 and CTNNB1 in human mesenchymal stem cells, cultured on each of the titanium surfaces, showed no differences, compared with osteoblast-induced cells. The immunofluorescence scores, for protein expression of beta-catenin in human mesenchymal stem cell treated cells, illustrates significantly improved results with the etched surface.

CONCLUSIONS

Present results suggested that different titanium surfaces might induce some differences in terms of gene expression. The only gene analyzed, which proved significant differences between the 2 titanium supports, was SP7; however, the other 3 genes indicating the existence of differences between the 2 titanium groups.

Dental pulp stem cells grown on dental implant titanium surfaces: An in vitro evaluation of differentiation and microRNAs expression

The surface roughness of dental implants influences the proliferation and differentiation rate of adult mesenchymal stem cells (MSCs). The aim of the present study was to evaluate whether specifically treated titanium implant surfaces influenced human dental pulp stem cells (DPSCs) differentiation in an osteogenic pattern through modulation of microRNAs expression. The degree of differentiation was evaluated after 7, 14, and 21 days, through the expression of microRNAs characterizing the osteogenesis (miR-133 and miR-135), of Runx2 and Smad5 (key factor transcriptions associated with osteoblast differentiation) and Osteocalcin, marker for the bone formation process. DPSCs were cultured on sandblasted and acid-etched titanium disks, with (Test) or without the presence of ions (Control). Early differentiation of DPSCs cultured on titanium could be detected at all the evaluated time points, respect to cells grown alone. Moreover, the Test surfaces seemed to induce a more marked cells differentiation. The obtained results demonstrated that microRNAs played a pivotal role in the differentiation of MSCs and could be used as marker of osteogenic differentiation. Furthermore, the evaluated ionized sandblasted and acid-etched surface seemed to markedly enhance the development of osteoblast cells. A faster osseointegration could be achieved in the presence of specifically treated implant surfaces, promising encouraging clinical outcomes. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 953-965, 2017.

Anatomical Remodeling of Buccal Bone Plate in 35 Premaxillary Post-Extraction Immediately Restored Single TPS Implants: 10-Year Radiographic Investigation

PURPOSE

The anatomical remodeling technique (ART) was proposed to place postextraction implants with the aid of specific osteotomes. This study is a clinical and radiographic evaluation with 10-year follow-up of anterior postextraction single implants placed with the ART and immediately restored.

MATERIALS AND METHODS

Thirty-five patients, with a hopeless tooth in the anterior maxilla, were included in the study and 35 implants were inserted according to the ART. Clinical and radiographic evaluations were performed at baseline (T0), after 6 (T1) and 14 months (T2), 4 years after surgery (T3) and every other year up to the 10-year follow-up (T4, T5, and T6). Implant success, survival, and failure rates were evaluated according to the International Congress of Oral Implantologists Pisa Consensus Conference criteria.

RESULTS

Twenty-nine patients and 29 implants were available for the 10-year data analysis. After 10 years, the accumulated mean marginal bone loss was 2.69 ± 0.42 mm. The cumulative survival rate of the implants was 100%.

CONCLUSIONS

Immediately loaded postextractive implants, placed according to the ART, have been proved to be a predictable method to rehabilitate single tooth in the anterior maxilla.

[Tissue engineering in dentistry]

Possibility of using stem cells and developing tissue engineering for regeneration of jaws bone defects, bones vault of the skull, dental and periodontal tissue are presented in the article.