Metabolic transcriptional analysis on copper tolerance in moderate thermophilic bioleaching microorganism Acidithiobacillus caldus

Bioleaching of metals from spent fluid catalytic cracking catalyst using adapted Acidithiobacillus caldus

In this study, an adapted bioleaching strain of Acidithiobacillus caldus UVS10 was successfully developed. Batch tests and tests in bioreactor were conducted to evaluate the metals bioleaching performance of A. caldus UVS10 to spent FCC catalyst (SFCCC). Results of batch experiments showed the bioleaching efficiency of Ni, V, La, and Ce in SFCCC reached 19.40%, 22.06%, 53.75%, and 59.56%, respectively. High SFCCC pulp density inhibited the leaching of metals. Sb leaching was inhibited in acidic environment caused by A. caldus UVS10. Contents of Ni, V, La, and Ce in extracellular polymeric substances (EPS) were significantly higher than those intracellular. Accumulation of metal in EPS and cytosol increased with the increase of SFCCC pulp density. V was less intercepted by EPS than Ni, La, and Ce, because of lower toxicity. Experimental results in bioreactor showed that Ni, V, La, and Ce could be effectively leached by A. caldus UVS10 under 10% pulp density. The aeration and stirring operating environment in bioreactor improved the leaching efficiency of metals in SFCCC. After bioleached in bioreactor, the available fraction content of four metals in SFCCC decreased significantly. Ecological risk analysis demonstrated the environmental risks of bioleached SFCCC were significantly lower than raw SFCCC. Different reaction kinetic models were used to represent metals leaching behavior under bioleaching of A. caldus UVS10, leaching of La and Ce showed good agreement with the product layer diffusion model, while Ni and V leaching kinetics fit well with the surface chemical reaction models.

Sessile Lifestyle Offers Protection against Copper Stress in Saccharolobus solfataricus

Some archaea from the genus Sulfolobus are important for bioleaching of copper, where metal resistant microorganisms are required. Biofilm generation is one of the ways microorganisms cope with some stimuli in nature, including heavy metals. The response to external factors, particularly in the biofilm form of life, is still underexplored in archaea. To explore how model thermoacidophilic archaeon Saccharolobus solfataricus faces copper stress during this lifestyle, changes in biofilms were studied using crystal violet staining, confocal fluorescence microscopy, and qPCR approaches. It was found that biofilm formation reached a maximum at 0.5 mM Cu, before starting to decrease at higher metal concentrations. The morphology of biofilms at 0.5 mM Cu was observed to be different, displaying lower thickness, different sugar patterns, and higher amounts of cells compared to standard growing conditions. Furthermore, copA, which is responsive to intracellular Cu concentration, was downregulated in biofilm cells when compared with planktonic cells exposed to the same metal concentration. The latest results suggests that cells in biofilms are less exposed to Cu than those in planktonic culture. In a PolyP-deficient strain, Cu was not able to induce biofilm formation at 0.5 mM. In summary, the findings reported here suggest that the biofilm form of life confers S. solfataricus advantages to face stress caused by Cu.Biofilm formation remains a relatively unexplored topic in archaeal research. Therefore, this knowledge in model organisms such as S. solfataricus, and how they use it to face stress, could be of great importance to engineer organisms with improved capabilities to be applied in biotechnological processes, such as bioleaching of metals.

Advances in bioleaching of waste lithium batteries under metal ion stress

In modern societies, the accumulation of vast amounts of waste Li-ion batteries (WLIBs) is a grave concern. Bioleaching has great potential for the economic recovery of valuable metals from various electronic wastes. It has been successfully applied in mining on commercial scales. Bioleaching of WLIBs can not only recover valuable metals but also prevent environmental pollution. Many acidophilic microorganisms (APM) have been used in bioleaching of natural ores and urban mines. However, the activities of the growth and metabolism of APM are seriously inhibited by the high concentrations of heavy metal ions released by the bio-solubilization process, which slows down bioleaching over time. Only when the response mechanism of APM to harsh conditions is well understood, effective strategies to address this critical operational hurdle can be obtained. In this review, a multi-scale approach is used to summarize studies on the characteristics of bioleaching processes under metal ion stress. The response mechanisms of bacteria, including the mRNA expression levels of intracellular genes related to heavy metal ion resistance, are also reviewed. Alleviation of metal ion stress via addition of chemicals, such as spermine and glutathione is discussed. Monitoring using electrochemical characteristics of APM biofilms under metal ion stress is explored. In conclusion, effective engineering strategies can be proposed based on a deep understanding of the response mechanisms of APM to metal ion stress, which have been used to improve bioleaching efficiency effectively in lab tests. It is very important to engineer new bioleaching strains with high resistance to metal ions using gene editing and synthetic biotechnology in the near future.

Multi-scale analysis of nickel ion tolerance mechanism for thermophilic Sulfobacillus thermosulfidooxidans in bioleaching

Bioleaching is intensively investigated for recovering valuable metals such as Li, Co, Ni and Cu. Nickel ion stress threatens the health of microorganisms when Ni²⁺ starts to accumulate in the leachate during the bioleaching of materials that are rich in Ni, such as spent lithium-ion batteries. The possible mechanisms underlying the response of S. thermosulfidooxidans to nickel ion stress were analyzed using a multi-scale approach. Under the condition of nickel ion stress, high concentrations of nickel ions were immobilized by extracellular polymeric substances, while concentrations of nickel ions inside the cells remained low. The intracellular adenosine triphosphate (ATP) concentration and H⁺-ATPase activity increased to maintain normal cell growth and metabolic activities. Scavenging abilities of S. thermosulfidooxidans for hydrogen peroxide and superoxide anion were enhanced to reduce oxidative damage induced by nickel ion stress. There were 734 differentially expressed genes identified by RNA-seq under nickel ion stress. Most of them were involved in oxidative phosphorylation, glutathione metabolism and genetic information processing, responsible for intracellular energy utilization, intracellular antioxidant capacity and DNA damage repair, respectively. The results of this study are of major significance for in-depth understanding of the mechanisms of acidophilic microorganisms' resistance to metal ions.

Molecular Insights into a Novel Cu(I)-Sensitive ArsR/SmtB Family Repressor in Extremophile Acidithiobacillus caldus

Acidithiobacillus caldus is a common bioleaching bacterium that is inevitably exposed to extreme copper stress in leachates. The ArsR/SmtB family of metalloregulatory repressors regulates homeostasis and resistance in bacteria by specifically responding to metals. Here, we characterized A. caldus Cu(I)-sensitive repressor (AcsR) and gained molecular insights into this new member of the ArsR/SmtB family. Transcriptional analysis indicated that the promoter (PIII) of acsR was highly active in Escherichia coli but inhibited upon AcsR binding to the PIII-acsR region. Size exclusion chromatography and circular dichroism spectra revealed that Cu^I-AcsR shared an identical assembly state with apo-AcsR, as a dimer with fewer α helices, more extended strands, and more β turns. Mutation of the cysteine site in AcsR did not affect its assembly state. Copper(I) titrations revealed that apo-AcsR bound two Cu(I) molecules per monomer in vitro with an average dissociation constant (K_D) for bicinchoninic acid competition of 2.55 × 10^-9 M. Site-directed mutation of putative Cu(I)-binding ligands in AcsR showed that replacing Cys64 with Ala reduces copper binding ability from two Cu(I) molecules per monomer to one, with an average K_D of 6.05 × 10^-9 M. Electrophoretic mobility shift assays revealed that apo-AcsR has high affinity for the 12-2-12 imperfect inverted repeats P2245 and P2270 in the acsR gene cluster and that Cu-loaded AcsR had lower affinity for DNA fragments than apo-AcsR. We developed a hypothetical working model of AcsR to better understand Cu resistance mechanisms in A. caldus. IMPORTANCE Copper (Cu) resistance among various microorganisms is attracting interest. The chemolithoautotrophic bacterium A. caldus, which can tolerate extreme copper stress (≥10 g/L Cu ions), is typically used to bioleach chalcopyrite (CuFeS₂). Understanding of Cu resistance in A. caldus is limited due to scant investigation and the absence of efficient gene manipulation tools. Here, we characterized a new member of the ArsR/SmtB family of prokaryotic metalloregulatory transcriptional proteins that repress operons linked to stress-inducing concentrations of heavy metal ions. This protein can bind two Cu(I) molecules per monomer and negatively regulate its gene cluster. Members of the ArsR/SmtB family have not been investigated in A. caldus until now. The discovery of this novel protein enriches understanding of Cu homeostasis in A. caldus.

Characterization and genomic analysis of two novel psychrotolerant Acidithiobacillus ferrooxidans strains from polar and subpolar environments

The bioleaching process is carried out by aerobic acidophilic iron-oxidizing bacteria that are mainly mesophilic or moderately thermophilic. However, many mining sites are located in areas where the mean temperature is lower than the optimal growth temperature of these microorganisms. In this work, we report the obtaining and characterization of two psychrotolerant bioleaching bacterial strains from low-temperature sites that included an abandoned mine site in Chilean Patagonia (PG05) and an acid rock drainage in Marian Cove, King George Island in Antarctic (MC2.2). The PG05 and MC2.2 strains showed significant iron-oxidation activity and grew optimally at 20°C. Genome sequence analyses showed chromosomes of 2.76 and 2.84 Mbp for PG05 and MC2.2, respectively, and an average nucleotide identity estimation indicated that both strains clustered with the acidophilic iron-oxidizing bacterium Acidithiobacillus ferrooxidans. The Patagonian PG05 strain had a high content of genes coding for tolerance to metals such as lead, zinc, and copper. Concordantly, electron microscopy revealed the intracellular presence of polyphosphate-like granules, likely involved in tolerance to metals and other stress conditions. The Antarctic MC2.2 strain showed a high dosage of genes for mercury resistance and low temperature adaptation. This report of cold-adapted cultures of the At. ferrooxidans species opens novel perspectives to satisfy the current challenges of the metal bioleaching industry.

Strategies for anti-oxidative stress and anti-acid stress in bioleaching of LiCoO2 using an acidophilic microbial consortium

High metal ion concentrations and low pH cause severely inhibit the activity of an acidophilic microbial consortium (AMC) in bioleaching. This work investigated the effects of exogenous spermine on biofilm formation and the bioleaching efficiency of LiCoO₂ by AMC in 9K medium. After the addition of 1 mM spermine, the activities of glutathione peroxidase and catalase increased, while the amount of H₂O₂, intracellular reactive oxygen species (ROS) and malondialdehyde in AMC decreased. These results indicated that the ability of AMC biofilm to resist oxidative stress introduced by 3.5 g/L Li⁺ and 30.1 g/L Co²⁺ was improved by spermine. The activity of glutamate decarboxylase was promoted to restore the intracellular pH buffering ability of AMC. Electrochemical measurements showed that the oxidation rate of pyrite was increased by exogenous spermine. As a result, high bioleaching efficiencies of 97.1% for Li⁺ and 96.1% for Co²⁺ from a 5.0% (w v^-1) lithium cobalt oxide powder slurry were achieved. This work demonstrated that Tafel polarization can be used to monitor the AMC biofilm's ability of uptaking electrons from pyrite during bioleaching. The corrosion current density increased with 1 mM spermine, indicating enhanced electron uptake by the biofilm from pyrite.

EpsRAc is a copper-sensing MarR family transcriptional repressor from Acidithiobacillus caldus

The MarR family, as multiple antibiotic resistance regulators, is associated with the resistance of organisms to unfavorable conditions. MarR family extracellular polymeric substances (EPS)-associated transcriptional regulator (EpsR^Ac) was closely associated with copper resistance in Acidithiobacillus caldus (A. caldus). Transcriptional analysis showed high activity of the epsR promoter (PI) in Escherichia coli and differential response to metal ions. The copper content and UV absorption spectrum of the co-purified protein did not increase, but a stoichiometry of 0.667 mol Cu(I) per EpsR^Ac monomer was observed in vitro in copper titration experiments, suggesting that Cu(II) acts with low affinity in binding to the EpsR^Ac protein. Electrophoretic mobility shift assays (EMSA) demonstrated that EpsR^Ac could bind to its own promoter in vitro, and the binding region was the palindrome sequence TGTTCATCGTGTGTGAGCACACA. EpsR^Ac negatively regulated its own gene expression, whereas Cu(II) mitigates this negative effect. EpsR^Ac did not bind to other neighboring gene promoters. Finally, we developed a working model to illustrate the regulatory mechanism of A. caldus in response to extreme copper stress. KEY POINTS: • Identification of a MarR family EPS-associated transcriptional regulator, named EpsR^Ac. • Cu(I) can bind to the EpsR^Ac protein with low affinity. • EpsR^Ac negatively regulates the expression of epsR, and Cu(II) can alleviate this negative regulation.

Cadmium stress triggers significant metabolic reprogramming in Enterococcus faecium CX 2-6

•

A cadmium resistant strain of Enterococcus faecium CX 2–6 is sequenced.

•

Differential expression analysis found 47% of CX 2–6 genes are significantly affected by Cd treatment.

•

Differentially expressed genes (DEGs) form physically linked gene clusters in the CX 2–6 genome.

•

A prophage is unique to CX 2–6 and is strongly activated by high Cd concentration.

•

A majority of DEGs responding to Cd treatment are present in the core genome.

Heavy metal pollutions in the soils are increasingly threatening the global crop and food production. Using plant associated bacteria to remediate heavy metal contamination is a promising approach. We have isolated a cadmium (Cd) resistant Enterococcus faecium strain CX 2–6 from a heavy metal contaminated farmland. We have shown that: (i) CX 2–6 can tolerate cadmium (Cd) with a slower growth rate; (ii) The CX 2–6 complete genome is fully assembled using PacBio long reads; (iii) Differential expression analysis found 47% of CX 2–6 genes are significantly affected by Cd treatment and form three gene groups with distinct expression profiles; (iv) Differentially expressed genes (DEGs) form physically linked gene clusters in the CX 2–6 genome, and one of the gene clusters corresponds to a prophage that is unique to CX 2–6 and is strongly activated when Cd concentration is higher; (v) A majority of DEGs responding to Cd treatment are present in the core genome; and (vi) 55 noncoding RNA genes are identified and 49 of them are DEGs responding to cadmium stress. Our pan-genome analysis and comparative RNA-seq data analysis has significantly improved our understanding of the metabolic reprogramming of E. faecium CX 2–6 under Cd stress.

Recent progress in the application of omics technologies in the study of bio-mining microorganisms from extreme environments

Bio-mining microorganisms are a key factor affecting the metal recovery rate of bio-leaching, which inevitably produces an extremely acidic environment. As a powerful tool for exploring the adaptive mechanisms of microorganisms in extreme environments, omics technologies can greatly aid our understanding of bio-mining microorganisms and their communities on the gene, mRNA, and protein levels. These omics technologies have their own advantages in exploring microbial diversity, adaptive evolution, changes in metabolic characteristics, and resistance mechanisms of single strains or their communities to extreme environments. These technologies can also be used to discover potential new genes, enzymes, metabolites, metabolic pathways, and species. In addition, integrated multi-omics analysis can link information at different biomolecular levels, thereby obtaining more accurate and complete global adaptation mechanisms of bio-mining microorganisms. This review introduces the current status and future trends in the application of omics technologies in the study of bio-mining microorganisms and their communities in extreme environments.

The adaptation mechanisms of Acidithiobacillus caldus CCTCC M 2018054 to extreme acid stress: Bioleaching performance, physiology, and transcriptomics

To understand the acid-resistant mechanism of bioleaching microorganism Acidithiobacillus caldus CCTCC M 2018054, its physiology and metabolic changes at the transcriptional level under extreme acid stress were systemically studied. Scanning electron microscopy (SEM), Fourier transform infrared reflection (FTIR) and X-ray diffraction (XRD) showed that with an increase in acidity, the absorption peak of sulfur oxidation-related functional groups such as S-O decreased significantly, and a dense sulfur passivation film appeared on the surface of the ore. Confocal laser scanning microscopy (CLSM) revealed that coverage scale of extracellular polymeric substance (EPS) and biofilm fluctuated accordingly along with the increasing acid stress (pH-stat 1.5, 1.2 0.9 and 0.6) during the bioleaching process. In response to acid stress, the increased levels of intracellular glutamic acid, alanine, cysteine, and proline contributed to the maintenance of intracellular pH homeostasis via decarboxylation and alkaline neutralization. Higher unsaturated fatty acid content was closely related to membrane fluidity. Up to 490 and 447 differentially expressed genes (DEGs) were identified at pH 1.5 vs pH 1.2 and pH 1.2 vs pH 0.9, respectively, and 177 common DEGs were associated with two-component system (TCS) regulation, transporter regulation, energy metabolism, and stress response. The upregulation of kdpB helped cells defend against proton invasion, whereas the downregulation of cysB and cbl implied stronger oxidation of sulfur compounds. The transcriptional level of sqr, sor, and soxA was significantly increased and consolidated the energy supply needed for resisting acid stress. Furthermore, eight of the identified DEGs (sor, cbl, ompA, atpF, nuoH, nuoC, sqr, grxB) were verified as being related to the acid stress response process. This study contributes toward expanding the application of these acidophiles in industrial bioleaching.

Molecular Insights into the Copper-Sensitive Operon Repressor in Acidithiobacillus caldus

The copper-sensitive operon repressor (CsoR) family, which is the main Cu(I)-sensing family, is widely distributed and regulates regulons involved in detoxification in response to extreme copper stress (a general range of ≥3 g/liter copper ions). Here, we identified CsoR in hyper-copper-resistant Acidithiobacillus caldus (CsoR^Ac), an organism used in the bioleaching process of copper ores. CsoR^Ac possesses highly conserved Cu(I) ligands and structures within the CsoR family members. Transcriptional analysis assays indicated that the promoter (PIII) of csoR was active but weakly responsive to copper in Escherichia coli. Copper titration assays gave a stoichiometry of 0.8 mol Cu(I) per apo-CsoR^Ac monomer in vitro combined with atomic absorption spectroscopy analysis. Cu^I-CsoR^Ac and apo-CsoR^Ac share essentially identical secondary structures and assembly states, as demonstrated by circular dichroism spectra and size exclusion chromatography profiles. The average dissociation constants (K_D = 2.26 × 10^-18 M and 0.53 × 10^-15 M) and Cu(I) binding affinity of apo-CsoR^Ac were estimated by bathocuproine disulfonate (BCS) and bicinchoninic acid (BCA) competition assays, respectively. Site-directed mutations of conserved Cu(I) ligands in CsoR^Ac did not significantly alter the secondary structure or assembly state. Competition assays showed that mutants had the same order of magnitude of Cu(I) binding affinity as apo-CsoR^Ac. Moreover, apo-CsoR^Ac could bind to the DNA fragment P08430 in vitro, although with low affinity. Finally, a working model was developed to illustrate putative copper resistance mechanisms in A. caldus. IMPORTANCE Research on copper resistance among various species has attracted considerable interest. However, due to the lack of effective and reproducible genetic tools, few studies regarding copper resistance have been reported for A. caldus. Here, we characterized a major Cu(I)-sensing family protein, CsoR^Ac, which binds Cu(I) with an attomolar affinity higher than that of the Cu(I)-specific chelator bathocuproine disulfonate. In particular, CsoR family proteins were identified only in A. caldus, rather than A. ferrooxidans and A. thiooxidans, which are both used for bioleaching. Meanwhile, A. caldus harbored more copper resistance determinants and a relatively full-scale regulatory system involved in copper homeostasis. These observations suggested that A. caldus may play an essential role in the application of engineered strains with higher copper resistance in the near future.

Simultaneously enhance iron/sulfur metabolism in column bioleaching of chalcocite by pyrite and sulfur oxidizers based on joint utilization of waste resource

In chalcocite (Cu₂S) bioleaching, the lack of iron metabolism is a key restricting factor. As the most common sulfide mineral, pyrite (FeS₂) can release Fe(Ⅱ) and compensate for the iron metabolism deficiency in chalcocite bioleaching. The bioleaching of chalcocite in an imitated industrial system was improved by enhancing the iron-sulfur metabolism simultaneously using pyrite and sulfur oxidizers based on the joint utilization of waste resources, while the bioleaching performance and community structure in the leachate were systematically investigated. Due to the active sulfur/iron metabolism, the pH reached 1.2, and Fe³⁺ was increased by 77.78%, while the biomass of planktonic cells was improved to 2.19 × 10⁷ cells/mL. Fourier transform infrared reflection (FTIR) and X-ray diffraction (XRD) analysis results showed that more iron-sulfur crystals were produced due to more active iron-sulfur metabolism. Scanning electron microscopy (SEM) revealed that many derivative particles and corrosion marks appeared on the surface of the ore, implying that the mineral-microbe interaction was strengthened. Confocal laser scanning microscopy (CLSM) showed the accumulation of cells and extracellular polymeric substances (EPS) on the ore surface, indicating a stronger contact leaching mechanism. Furthermore, the community structure and canonical correspondence analysis (CCA) demonstrated that the introduction of sulfur-oxidizing bacteria and pyrite could maintain the diversity of dominant leaching microorganisms at a high level. Sulfobacillus (27.75%) and Leptospirllillum (20.26%) were the dominant sulfur-oxidizing and iron-oxidizing bacteria during the bioleaching process. With the accumulation of multiple positive effects, the copper ion leaching rate was improved by 44.8%. In general, this new type of multiple intervention strategy can provide an important guide for the bioleaching of low-grade ores.

Characteristics of the copper-induced viable-but-non-culturable state in bacteria

The antimicrobial applications of copper (Cu) are exploited in several industries, such as agriculture and healthcare settings. While Cu is capable of efficiently killing microorganisms, sub-lethal doses can induce a viable-but-non-culturable (VBNC) state in bacteria of many distinct clades. VBNC cells cannot be detected by standard culture-based detection methods, and can become a threat to plants and animals as they often retain virulent traits upon resuscitation. Here we discuss the putative mechanisms of the Cu-induced VBNC state. Common observations in Cu-induced VBNC cells include a cellular response to reactive oxygen species, the exhaustion of energy reserves, and a reconfiguration of the proteome. While showing partial overlap with other VBNC state-inducing stressors, these changes seem to be part of an adaptive response to Cu toxicity. Furthermore, we argue that Cu resistance mechanisms such as P-type ATPases and multicopper oxidases may ward off entry into the VBNC state to some extent. The spread of these mechanisms across multi-species populations could increase population-level resistance to Cu antimicrobials. As Cu resistance mechanisms are often co-selected with antibiotic resistance mechanisms, this threat is exacerbated.

Sulfur metabolic engineering enhances cadmium stress tolerance and root to shoot iron translocation in Brassica napus L

Serine acetyltransferase (SAT) (EC 2.3.1.30) is the rate-limiting enzyme of cysteine (Cys) biosynthesis, providing the decisive precursor for the ubiquitous defense thiol glutathione (GSH). Together with O-acetylserine (thiol) lyase (OAS-TL; EC 2.5.1.47) SAT generates Cys in the cytosol, plastids, and mitochondria of vascular plants. The current study aimed to overproduce Cys and GSH for enhanced stress tolerance via overexpression of the feedback-insensitive isoform of serine acetyltransferase from tobacco, i.e., NtSAT4. Constitutive overexpression of NtSAT4 in Brassica napus resulted in the 2.6-fold-4-fold higher SAT activity in different subcellular compartment-specific lines. This higher SAT activity led to a 2.5-fold-3.5-fold higher steady-state level of free Cys and 2.2-fold-5.3-fold elevated level of GSH in leaves compared with nontransformed plants. Among the compartment-specific lines, the mitochondrial targeted NtSAT4 overexpressor line M-182 showed the highest levels of Cys (3.5-fold) and GSH (5.3-fold) compared with wild-type plants. Overexpression of NtSAT4 conferred a physiological advantage in terms of enhanced tolerance against oxidative stress with hydrogen peroxide and the heavy metal cadmium (Cd). The NtSAT4 overexpressor lines showed a significantly higher amount of iron (Fe) translocation from roots to shoots compared with nontransformed plants. Overall, these results suggest that overexpression of NtSAT4 is a promising approach to creating plants with tolerance to heavy metals and oxidative stress and, in addition, may potentially improve plant nutrition in terms of enhanced Fe translocation from roots to shoots.

A novel “turn-on” fluorescent probe based on naphthalimide for the tracking of lysosomal Cu2+ in living cells

The lysosome-targeted probe CuNI exhibits highly effective fluorescence detection ability for Cu²⁺ in aqueous solution and cells. The fluorescent enhancement is due to the Cu²⁺-catalyzed hydrolysis of CuNI and the AIE effect of the hydrolysate MFNI.