Biodegradation of bisphenols with immobilized laccase or tyrosinase on polyacrylonitrile beads

Fungal tyrosinase immobilized on chitosan, calcium alginate, and silica gel for phenol elimination and dye decolorization

Aspergillus nidulans (AUMC No. 7147) was utilized for tyrosinase (EC 1.14.18.1) production. In this study, we purified the enzyme, immobilized it on various beads, analyzed its kinetics, and applied it for phenol removal and dye decolorization, including Crystal Violet (CV), Congo Red (CR), Methyl Red (MR), and Malachite Green (MG). Tyrosinase was isolated from Aspergillus nidulans (AUMC No. 7147) with a specific activity of 230.76 units mg⁻¹ protein. The purified enzyme was then immobilized on chitosan, Ca-alginate, and silica gel, achieving immobilization efficiencies of 89.6 %, 75.0 %, and 69.4 %, respectively. After 10 reuse cycles, the immobilized tyrosinase on chitosan and Ca-alginate retained 41 % and 15 % of its initial activity, respectively. The Km values were determined to be 0.23, 0.37, and 0.38 mM, while the Vmax values were 32.5, 33.3-, and 27.5-units mg⁻¹ protein for the free enzyme and the two immobilized forms, respectively. After 30 days of storage at 25°C, the residual activities of tyrosinase immobilized on silica gel, alginate, and chitosan were 14 %, 27 %, and 52 %, respectively. The optimal temperatures for the free and immobilized tyrosinase were 40°C and 50°C, respectively. The activation energies were calculated as 59.66, 54.43, and 48.86 KJ mol⁻¹ . The free tyrosinase exhibited an optimal pH of 7.0, which shifted to pH 8.0 upon immobilization. The enzyme could be reused for at least eight cycles. Phenol was effectively removed by chitosan-immobilized tyrosinase; however, the removal efficiency declined in subsequent cycles. The highest removal percentage was achieved using the chitosan-immobilized enzyme at pH 8.0, and Temp., 50°C, after 2 hours. Additionally, the immobilized enzyme was effective in decolorizing the dyes Crystal Violet (CV), Congo Red (CR), Methyl Red (MR), and Malachite Green (MG). These findings support bioremediation strategies for the safe environmental removal of toxic dyes, and phenol from wastewater.

Immobilization of purified pectinase from Aspergillus nidulans on chitosan and alginate beads for biotechnological applications

BACKGROUND

Because the process is cost-effective, microbial pectinase is used in juice clearing. The isolation, immobilization, and characterization of pectinase from Aspergillus nidulans (Eidam) G. Winter (AUMC No. 7147) were therefore the focus of the current investigation.

RESULTS

Ammonium sulphate (85%), DEAE-cellulose, and Sephadex G-200 were used to purify the enzyme. With a yield of 30.4%, the final specific activity was 400 units mg-1 protein and 125-fold purification. Using SDS-PAGE to validate the purification of the pectinase, a single band showing the homogeneity of the purified pectinase with a molecular weight of 50 kD was found. Chitosan and calcium alginate both effectively immobilized pectinase, with immobilization efficiencies of 85.7 and 69.4%, respectively. At 50, 55, 60, and 65 °C, the thermostability of both free and chitosan-immobilized pectinase was examined. The free and chitosan-immobilized enzymes had half-lives (t1/2) of 23.83 and 28.64 min at 65 °C, and their Kd values were 0.0291 and 0.0242 min-1, respectively. In addition, the Z values were 44.6 and 31.54 °C, while the D values were 79.2 and 95.1 min. Compared to the untreated one, the orange, mango, and pineapple juices treated with immobilized pure pectinase showed greater clarity. Following treatment with pure pectinase, the fruit juice's 1, 1-diphenyl-2-picrylhydrazyl and 2, 2'-azino-bis 3-ethylbenzothiazoline-6-sulfonate scavenging activities increased. Following treatment with pure pectinase, the amounts of total phenolics and total flavonoids increased.

CONCLUSION

The procedure is deemed cost-effective in the food industry because the strong affinity of fungal pectinase for pectin. The investigated pectinase supported its usage in the food industry by being able to clear orange, mango, and pineapple juices.

Tyrosinases: a family of copper-containing metalloenzymes

Tyrosinases (TYRs) are a family of copper-containing metalloenzymes that are present in all domains of life. TYRs catalyze the reactions that start the biosynthesis of melanin, the main pigment of the animal kingdom, and are also involved in the formation of the bright colors seen on the caps of mushrooms and in the petals of flowers. TYRs catalyze the ortho-hydroxylation and oxidation of phenols and the oxidation of catechols to the respective o-quinones. They only need molecular oxygen to do that, and the products of TYRs-o-quinones-are highly reactive and will usually react with the next available nucleophile. This reactivity can be harnessed for pharmaceutical applications as well as in environmental and food biotechnology. The majority of both basic and applied research on TYRs utilizes "mushroom tyrosinase", a crude enzyme preparation derived from button mushroom (Agaricus bisporus) fruiting bodies. Access to pure TYR preparations comes almost exclusively from the production of recombinant TYRs as the purification of these enzymes from the natural source is usually very laborious and plagued by low yields. In this text an introduction into the biochemistry of the enzyme TYR will be given, followed by an overview of available structural data of TYRs, the current model for the catalytic mechanism, a survey of reports on the recombinant production of this important metalloenzyme family, and a review of the applications of TYRs for the synthesis of catechols, as biosensors, in bioremediation, for the cross-linking of proteins and medical hydrogels as well as for melanoma treatment.

Graphical Abstract

Diverting organic waste from landfills via insect biomanufacturing using engineered black soldier flies (Hermetia illucens)

A major roadblock towards the realisation of a circular economy are the lack of high-value products that can be generated from waste. Black soldier flies (BSF; Hermetia illucens) are gaining traction for their ability to rapidly consume large quantities of organic wastes. However, these are primarily used to produce a small variety of products, such as animal feed ingredients and fertiliser. Using synthetic biology, BSF could be developed into a novel sustainable biomanufacturing platform to valorise a broader variety of organic waste feedstocks into enhanced animal feeds, a large variety of high-value biomolecules including industrial enzymes and lipids, and improved fertiliser.

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

Oxidoreductase enzymes: Characteristics, applications, and challenges as a biocatalyst

Oxidoreductases are enzymes with distinctive characteristics that favor their use in different areas, such as agriculture, environmental management, medicine, and analytical chemistry. Among these enzymes, oxidases, dehydrogenases, peroxidases, and oxygenases are very interesting. Because their substrate diversity, they can be used in different biocatalytic processes by homogeneous and heterogeneous catalysis. Immobilization of these enzymes has favored their use in the solution of different biotechnological problems, with a notable increase in the study and optimization of this technology in the last years. In this review, the main structural and catalytical features of oxidoreductases, their substrate specificity, immobilization, and usage in biocatalytic processes, such as bioconversion, bioremediation, and biosensors obtainment, are presented.

Use of tyrosinase-inorganic salt hybrid nanoflowers and tyrosinase-MOF hybrid composites for elimination of phenolic pollutants from industrial wastewaters

Removal of phenolic pollutants from industrial wastewaters is always an important practical problem. Use of enzymes for dephenolization provides a green solution. In this work, enzymatic methods were developed by employing mushroom tyrosinase immobilized as enzyme-Cu₃(PO₄)₂ hybrid nanoflowers and enzyme-metal organic framework (i.e., ZIF-8 and HKUST-1) hybrid composites, which were shown to be superior to processes mediated by tyrosinase immobilized on other supports in both dephenolization efficiency and reusability. Comparatively, tyrosinase@Cu₃(PO₄)₂ and tyrosinase@HKUST-1 were better than tyrosinase@ZIF-8 in both specific activity and dephenolization efficiency. Typical phenolic pollutants, including 3 monophenols (phenol, p-cresol, p-chlorophenol) and 3 bisphenols (BPA, BPB, BPF), can be completely eliminated within 0.5-4 h. The dephenolization order was discussed based on the enzyme's substrate specificity. The operability and reusability of these hybrid biocomposites were highly improved by entrapping into alginate gels or by incorporating with modified magnetic Fe₃O₄ nanoparticles. Particularly, the magnetic biocatalyst was prepared via a facile one-pot/one-step de novo synthetic strategy, optimized by using response surface methodology (RSM). The as-prepared magnetic tyrosinase@mHKUST-1 retained a high dephenolization efficiency of 81% after 10 cycles and was effective for continuous dephenolization for at least 24 h. These hybrid biocomposites were also successfully applied to treatment of real industrial wastewater from a coke plant.

Tyrosinase Immobilization Strategies for the Development of Electrochemical Biosensors-A Review

The development of enzyme biosensors has successfully overcome various challenges such as enzyme instability, loss of enzyme activity or long response time. In the electroanalytical field, tyrosinase is used to develop biosensors that exploit its ability to catalyze the oxidation of numerous types of phenolic compounds with antioxidant and neurotransmitter roles. This review critically examines the main tyrosinase immobilization techniques for the development of sensitive electrochemical biosensors. Immobilization strategies are mainly classified according to the degree of reversibility/irreversibility of enzyme binding to the support material. Each tyrosinase immobilization method has advantages and limitations, and its selection depends mainly on the type of support electrode, electrode-modifying nanomaterials, cross-linking agent or surfactants used. Tyrosinase immobilization by cross-linking is characterized by very frequent use with outstanding performance of the developed biosensors. Additionally, research in recent years has focused on new immobilization strategies involving cross-linking, such as cross-linked enzyme aggregates (CLEAs) and magnetic cross-linked enzyme aggregates (mCLEAs). Therefore, it can be considered that cross-linking immobilization is the most feasible and economical approach, also providing the possibility of selecting the reagents used and the order of the immobilization steps, which favor the enhancement of biosensor performance characteristics.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Bisphenol A in the environment and recent advances in biodegradation by fungi

Bisphenol A (BPA) is a compound used in the manufacture of a wide variety of everyday materials that, when released into the environment, causes multiple detrimental effects on humans and other organisms. The reason for this review is to provide an overview of the presence, distribution, and concentration of BPA in water, soil, sediment, and air, as well as the process of release and migration, biomagnification, and exposure mechanisms that cause various toxic effects in humans. Therefore, it is important to seek efficient and economic strategies that allow its removal from the environment and prevent it from reaching humans through food chains. Likewise, the main removal techniques are analyzed, focusing on biological treatments, particularly the most recent advances in the degradation of BPA in different environmental matrices through the use of ligninolytic fungi, non-ligninolytic fungi and yeasts, as well as the possible routes of metabolic processes that allow their biotransformation or biodegradation due to their efficient extracellular enzyme systems. This review supports the importance of the application of new biotechnological tools for the degradation of BPA.

Immobilization of laccase on chitosan functionalized halloysite nanotubes for degradation of Bisphenol A in aqueous solution: degradation mechanism and mineralization pathway

As a hazardous organic chemical raw material, Bisphenol A (BPA) has attracted a great deal of scientific and public attention. In this study, the chitosan functionalized halloysite nanotubes immobilized laccase (lac@CS-HNTs) was prepared by simultaneous adsorption-covalent binding method to remove BPA for the first time. We optimized the preparation of lac@CS-NHTs by controlling one-factor variable method and response surface methodology (RSM). The cubic polynomial regression model via Design-Expert 12 was developed to describe the optimal preparation conditions of immobilized laccase. Under the optimal conditions, lac@CS-NHTs obtained the maximum enzyme activity, and the enzyme loading was as high as 60.10 mg/g. The results of batch removal experiment of BPA showed that under the optimum treatment condition, the BPA removal rate of lac@CS-NHTs, FL and heat-inactivated lac@CS-NHTs was 87.31 %, 60.89 % and 24.54 %, respectively, which indicated that the contribution of biodegradation was greater than adsorption. In addition, the relative activity of lac@CS-NHTs dropped to about 44.24 % after 8 cycles of BPA removal, which demonstrated that lac@CS-NHTs have the potential to reduce costs in practical applications. Finally, the possible degradation mechanism and mineralization pathway of BPA were given via High-performance liquid chromatography (HPLC) analysis and gas chromatography-mass spectrometry (GC-MS) analysis.

Green remediation potential of immobilized oxidoreductases to treat halo-organic pollutants persist in wastewater and soil matrices - A way forward

The alarming presence of hazardous halo-organic pollutants in wastewater and soils generated by industrial growth, pharmaceutical and agricultural activities is a major environmental concern that has drawn the attention of scientists. Unfortunately, the application of conventional technologies within hazardous materials remediation processes has radically failed due to their high cost and ineffectiveness. Consequently, the design of innovative and sustainable techniques to remove halo-organic contaminants from wastewater and soils is crucial. Altogether, these aspects have led to the search for safe and efficient alternatives for the treatment of contaminated matrices. In fact, over the last decades, the efficacy of immobilized oxidoreductases has been explored to achieve the removal of halo-organic pollutants from diverse tainted media. Several reports have indicated that these enzymatic constructs possess unique properties, such as high removal rates, improved stability, and excellent reusability, making them promising candidates for green remediation processes. Hence, in this current review, we present an insight of green remediation approaches based on the use of immobilized constructs of phenoloxidases (e.g., laccase and tyrosinase) and peroxidases (e.g., horseradish peroxidase, chloroperoxidase, and manganese peroxidase) for sustainable decontamination of wastewater and soil matrices from halo-organic pollutants, including 2,4-dichlorophenol, 4-chlorophenol, diclofenac, 2-chlorophenol, 2,4,6-trichlorophenol, among others.

Free and immobilized biocatalysts for removing micropollutants from water and wastewater: Recent progress and challenges

Enzymatic conversion of micropollutants into less-toxic derivatives is an important bioremediation strategy. This paper aims to critically review the progress in water and wastewater treatment by both free and immobilized enzymes presenting this approach as highly efficient and performed under environmentally benign and friendly conditions. The review also summarises the effects of inorganic and organic wastewater matrix constituents on enzymatic activity and degradation efficiency of micropollutants. Finally, application of enzymatic reactors facilitate continuous treatment of wastewater and obtaining of pure final effluents. Of a particular note, enzymatic treatment of micropollutants from wastewater has been mostly reported by laboratory scale studies. Thus, this review also highlights key research gaps of the existing techniques and provides future perspectives to facilitate the transfer of the lab-scale solutions to a larger scale and to improve operationability of biodegradation processes.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

A Perspective Review on the Application of Polyacrylonitrile-Based Supports for Laccase Immobilization

The use of laccases applied in bioremediation processes has been increasingly studied, given the urgent need to overcome the environmental problems caused by emerging contaminants. It is known that immobilized enzymes have better operational stability under reaction conditions, allowing for greater applicability. However, given the lack of commercially available immobilized laccases, the search for immobilization materials and methods continues to gain effort. The use of polyacrylonitrile (PAN) to immobilize enzymes has been investigated since it is a low-cost material and can be modified and functionalized to well interact with the enzyme. This polymer can be used with different morphologies such as fibers, beads, and core-shell, presenting as an easily applicable alternative. This review presents the missing link between polymer and enzyme through an overview of PAN's current use as support for laccase immobilization and polymer functionalization methods, considering the importance of immobilized laccases in several industrial sectors.

Applications of Biocatalysts for Sustainable Oxidation of Phenolic Pollutants: A Review

Phenol and its derivatives are hazardous, teratogenic and mutagenic, and have gained significant attention in recent years due to their high toxicity even at low concentrations. Phenolic compounds appear in petroleum refinery wastewater from several sources, such as the neutralized spent caustic waste streams, the tank water drain, the desalter effluent and the production unit. Therefore, effective treatments of such wastewaters are crucial. Conventional techniques used to treat these wastewaters pose several drawbacks, such as incomplete or low efficient removal of phenols. Recently, biocatalysts have attracted much attention for the sustainable and effective removal of toxic chemicals like phenols from wastewaters. The advantages of biocatalytic processes over the conventional treatment methods are their ability to operate over a wide range of operating conditions, low consumption of oxidants, simpler process control, and no delays or shock loading effects associated with the start-up/shutdown of the plant. Among different biocatalysts, oxidoreductases (i.e., tyrosinase, laccase and horseradish peroxidase) are known as green catalysts with massive potentialities to sustainably tackle phenolic contaminants of high concerns. Such enzymes mainly catalyze the o-hydroxylation of a broad spectrum of environmentally related contaminants into their corresponding o-diphenols. This review covers the latest advancement regarding the exploitation of these enzymes for sustainable oxidation of phenolic compounds in wastewater, and suggests a way forward.

New tyrosinases with putative action against contaminants of emerging concern

Tyrosinases (EC 1.14.18.1) are type-3 copper metalloenzymes with strong oxidative capacities and low allosteric selectivity to phenolic and non-phenolic aromatic compounds, which have been used as biosensors and biocatalysts to mitigate the impacts of environmental contaminants over aquatic ecosystems. However, the widespread use of these polyphenol oxidases is limited by elevated production costs and restricted knowledge on their spectrum of action. Here, six tyrosinase homologs were identified and characterized from the genomes of four widespread freshwater ciliates using bioinformatics. Next, we performed a virtual screening to calculate binding energies between 3D models of these homologs and ~ 1000 contaminants of emerging concern (CECs), as an indirect approach to identify likely and unlikely targets for tyrosinases. Many fine chemicals, pharmaceuticals, personal care products, illicit drugs, natural toxins, and pesticides exhibited strong binding energies to these new tyrosinases, suggesting the spectrum of targets of these enzymes might be considerably broader than previously thought. Many ciliates, including those carrying tyrosinase genes, are fast-growing unicellular microeukaryotes that can be efficiently cultured, at large scales, under in vitro conditions, suggesting these organisms should be regarded as potential low-cost sources of new environmental biotechnological molecules.

Laccase aggregates via poly-lysine-supported immobilization onto PEGA resin, with efficient activity and high operational stability and can be used to degrade endocrine-disrupting chemicals

Laccase was for the first time immobilized as enzyme aggregates onto PEGA resin using the technique of poly-lysine-supported cross-linking. Immobilized laccase showed efficient enzymatic activity with high operational stability and good reusability.

Enzyme-catalysed polymer cross-linking: Biocatalytic tools for chemical biology, materials science and beyond

Intermolecular cross-linking is one of the most important techniques that can be used to fundamentally alter the material properties of a polymer. The introduction of covalent bonds between individual polymer chains creates 3D macromolecular assemblies with enhanced mechanical properties and greater chemical or thermal tolerances. In contrast to many chemical cross-linking reactions, which are the basis of thermoset plastics, enzyme catalysed processes offer a complimentary paradigm for the assembly of cross-linked polymer networks through their predictability and high levels of control. Additionally, enzyme catalysed reactions offer an inherently 'greener' and more biocompatible approach to covalent bond formation, which could include the use of aqueous solvents, ambient temperatures, and heavy metal-free reagents. Here, we review recent progress in the development of biocatalytic methods for polymer cross-linking, with a specific focus on the most promising candidate enzyme classes and their underlying catalytic mechanisms. We also provide exemplars of the use of enzyme catalysed cross-linking reactions in industrially relevant applications, noting the limitations of these approaches and outlining strategies to mitigate reported deficiencies.

Enzymatic degradation of ginkgolic acid by laccase immobilized on novel electrospun nanofiber mat

BACKGROUND

Ginkgo biloba leaf extract contains many active ingredients that are beneficial for health. However, ginkgolic acid, one of the major components found in G. biloba extract, may cause serious allergic and toxic side effects. The purpose of this study is to immobilize the laccase system on the electrospun nylon fiber mat (NFM) to hydrolyze the ginkgolic acid in G. biloba leaf extract efficiently.

RESULTS

Novel electrospinning technology successfully produced high-quality nanoscopic fiber mats made of a mixture of multi-walled carbon nanotube and nylon 6,6. Laccase that was immobilized onto the NFM exhibited much higher efficiency in the catalyzation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) than nylon 6,6 pellets. After being immobilized onto the NFM, the pH and temperature stability of laccase were significantly improved. The NFM-immobilized laccase could maintain more than 50% of its original activity even after 40 days of storage or 10 operational cycles. The kinetic parameters, including rate constant (K), the time (τ50) in which 50% of ginkgolic acid hydrolysis was reached, the time (τcomplete) required to achieve complete ginkgolic acid hydrolysis, Km and Vmax were determined, and were 0.07 ± 0.01 min^-1 , 8.97 ± 0.55 min, 45.45 ± 2.79 min, 0.51 ± 0.09 mM and 0.49 ± 0.03 mM min^-1  mg^-1 , respectively.

CONCLUSION

The result successfully demonstrated the strong potential of using novel electrospun nanofiber mats as enzyme immobilization platforms, which could significantly enhance enzyme activity and stability. © 2020 Society of Chemical Industry.

Biodegradation of bisphenol A by the immobilized laccase on some synthesized and modified forms of zeolite Y

Bisphenol A (BPA) is an environmental pollutant with adverse effects on different ecosystems. In this study, immobilized laccase enzymes onto inorganic supports were used to remove BPA. Laccase was successfully immobilized on sodium zeolite Y (NaY) and its modified desilicated (DSY) and dealuminated (DAY) forms. NaY-based supports were instrumentally characterized. The immobilized laccase on NaY (laccase@NaY), desilicated (laccase@DSY), and dealuminated (laccase@DAY) forms showed significant improvement on immobilization yield (IY%) and efficiency (IE%). Laccase@DSY and laccase@NaY showed IY% = 73.18 ± 3.33 % and 46.23 ± 1.81 % and IE% = 94.50 ± 1.86 %, and 74.39 ± 1.41 %, respectively, whereas IY% and IE% for laccase@DAY were achieved as 81.12 ± 1.32 % and 98.56 ± 2.93 %, respectively. The supports also increased the enzyme characteristics such as pH-temperature range, catalytic stability, and reusability. K_m values were 0.73 ± 0.05, 0.26 ± 0.09, 0.31 ± 0.5, and 1.01 ± 0.03 mM for laccase@NaY, laccase@DAY, laccase@DSY, and the free enzyme, respectively. The enzyme demonstrated higher biodegradation ability of bisphenol A upon immobilization on the supports compared to that of the soluble enzyme. A bio-removal yield of 86.7 % was obtained considering three parameters including amount of laccase@DAY (8 U mg^-1), concentration of BPA (0.5 mM), and treatment time (1 h) based on response surface methodology (RSM). Biodegradation metabolites (49 ± 5.8 %) and unconverted BPA (14 ± 5.2 %) were analyzed by gas chromatography-mass spectrometry.

Persistence and impact of steroidal estrogens on the environment and their laccase-assisted removal

Steroidal estrogens are widespread water contaminants with potential carcinogenic and endocrine-disrupting activities. The World Health Organization has listed estrogens as group 1 carcinogens. These contaminants are of substantial concern because of potential threats to human health, and aquatic organisms on long-term exposure. A range of methods, including oxidation, adsorption, electrochemical, and irradiation techniques have been employed for their remediation from aqueous systems. However, inadequate removal, toxic sludge generation, high operating costs, and the requisite for skilled operating and maintenance personnel commercially hampered the application of many methods. An interesting alternative treatment approach based on the use of oxidoreductases, particularly laccases, has recently gained amicability for the biotransformation of emerging pollutants. The use of immobilized enzymes is more cost-effective from an industrial perspective due to improved catalytic stability, reusability, reduction of product inhibition, and easier product separation. This review provides comprehensive knowledge on the use of laccases in the biodegradation of steroidal estrogens, including estrone, 17β-estradiol, and 17α-ethinylestradiol with endocrine-disrupting potency from the environment. After an overview of estrogens and catalytic properties of laccase, the use of free, as well as immobilized laccases with a particular emphasis on estrogens removal by laccase-based fed-batch, packed bed bioreactors, and membrane reactors, is discussed. A comparison of existing treatment technologies with enzyme technology for the removal of estrogens from different environmental matrices is made. Lastly, along with concluding remarks, future research direction aimed at bridging knowledge gaps for estrogenic compounds removal are also proposed in this very important research area.

Mitigation of bisphenol A using an array of laccase-based robust bio-catalytic cues - A review

Bisphenol A (BPA) is a known endocrine disruptor that poses concerning environmental and human-health related issues and ecological risks. It has been largely used as an intermediate in the manufacture of epoxy resins and polycarbonate plastics. Traces of BPA can reach into the environment through inadequate or inefficient removal during wastewater treatment, uncontrolled landfill leachates, and leaching out from the discarded BPA-based materials. Several physicochemical treatment methods including adsorption, Fenton, ozonation, electrochemical and photochemical degradation, and membrane filtration, have been applied for BPA elimination. However, these methods are not adequate for large-scale treatment due to some inherent limitations. Benefiting from high catalytic efficiency and specificity, enzyme-based bio-catalytic degradation strategies are considered quite meaningful alternative for efficient and effective BPA removal from different routes. Among various oxidoreductases, i.e., laccases exhibited a superior potential for the remediation of BPA-containing wastewater. Enzymatic oxidation of BPA can be boosted by using various natural or synthetic redox mediators. Immobilized enzymes can expand their applicability to continuous bioprocessing and facilitates process intensification. Therefore, optimized formulations of insolubilized biocatalysts are of strategic interest in the environmental biotechnology. In this review, recent research studies dealing with BPA removal by the laccase-catalyzed system are presented. At first, the presence of BPA in the ecosystem, sources, exposure, and its impact on the living organisms and human beings is summarized. Then, we highlighted the use of crude as well as immobilized laccases for the degradation of BPA. In addition to toxicity and estrogenicity removal studies, the unresolved challenges, concluding remarks, and possible future direction is proposed in this important research area. It is palpable from the literature reviewed that free as well as immobilized forms of laccases have displayed noteworthy potential for BPA removal from wastewater.

Polymer-Coated Mesoporous Carbon as Enzyme Platform for Oxidation of Bisphenol A in Organic Solvents

Bisphenol A (BPA) is not only a widely used chemical but also a toxic pollutant, and its biodegradation in an aqueous environment is hard due to its near insolubility in water. While the enzyme tyrosinase can oxidize BPA in organic solvents, it does so only very slowly. In the present study, we have found that in toluene the catalytic activity of tyrosinase deposited onto coated mesoporous carbon is significantly enhanced when the support is precoated with polyethylenimine. The resultant enzymatically formed o-quinone is both easily recoverable and potentially useful monomer. As a particular example, the o-quinone readily reacts with diamine in toluene to form poly(amino-quinone) polymers, which are suitable for anticorrosion, energy storage, or biosensor applications.

Emerging contaminants of high concern and their enzyme-assisted biodegradation - A review

The widespread occurrence and adverse environmental and health-related impacts of various types of emerging contaminants (ECs) have become an issue of high concern. With ever increasing scientific knowledge, socio-economic awareness, health-related problems and ecological apprehensions, people are more concerned about the widespread ECs, around the globe. Among ECs, biologically active compounds from pharmaceutical, cosmeceutical, biomedical, personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and flame-retardants are of paramount concern. The presence and persistence of ECs in water bodies are of continued and burning interest, worldwide. Various types of ECs are being discharged knowingly/unknowingly with/without partial treatments into the aquatic environments that pose serious health issues and affects the entire living ecosystem. So far, various approaches have been developed for ECs degradation and removal to diminish their adverse impact. Many previous and/or ongoing studies have focused on contaminants degradation and efficient removal via numerous treatment strategies, i.e. (1) physical, (2) chemical and (3) biological. However, the experimental evidence is lacking to enable specific predictions about ECs mechanistic degradation and removal fate across various in-practice systems. In this context, the deployment oxidoreductases such as peroxidases (lignin peroxidases, manganese-dependent peroxidases, and horseradish peroxidase), aromatic dioxygenases, various oxygenases, laccases, and tyrosinases have received considerable research attention. Immobilization is highlighted as a promising approach to improve enzyme catalytic performance and stabilization, as well as, to protect the three-dimensional structure of the enzyme against the undesirable consequences of harsh reaction environment. This work overviews the current and state-of-the-art critical aspect related to hazardous pollutants at large and ECs in particular by the immobilized oxidoreductase enzymes. The first part of the review focuses on the occurrence, physiochemical behavior, potent sources and significant routes of ECs. Following that, environmentally-related adverse impacts and health-related issues of ECs are discussed in the second part. In the third part, biodegradation and removal strategies with a comparative overview of several conventional vs. non-conventional methods are presented briefly. The fourth part majorly focuses on operational modes of different oxidoreductase enzyme-based biocatalytic processes for the biodegradation and biotransformation of a wide array of harmful environmental contaminants. Finally, the left behind research gaps, concluding remarks as well as future trends and recommendations in the use of carrier-immobilized oxidoreductases for environmental perspective are also discussed.

A highly reusable MANAE-agarose-immobilized Pleurotus ostreatus laccase for degradation of bisphenol A

Bisphenol A (BPA) is an endocrine disruptor compound that is continuously released into the environment and is barely degraded in wastewater treatment plants. A previous study showed that free Pleurotus ostreatus laccase is efficient in degrading BPA producing less toxic metabolites. In the present study, this laccase was successfully immobilized onto MANAE-agarose, improving its efficiency in degrading BPA and its thermal and storage stabilities. In addition to this, the immobilized enzyme retained >90% of its initial capability to degrade BPA after 15cycles of reuse. P. ostreatus laccase immobilized onto MANAE-agarose could be an economical alternative for large scale degradation of BPA in aqueous systems.

Developments in support materials for immobilization of oxidoreductases: A comprehensive review

Bioremediation, a biologically mediated transformation or degradation of persistent chemicals into nonhazardous or less-hazardous substances, has been recognized as a key strategy to control levels of pollutants in water and soils. The use of enzymes, notably oxidoreductases such as laccases, tyrosinases, various oxygenases, aromatic dioxygenases, and different peroxidases (all of EC class 1) is receiving significant research attention in this regard. It should be stated that immobilization is emphasized as a powerful tool for enhancement of enzyme activity and stability as well as for protection of the enzyme proteins against negative effects of harsh reaction conditions. As proper selection of support materials for immobilization and their performance is overlooked when it comes to comparing performance of immobilized enzyme in academic studies, this review summarizes the current state of knowledge regarding the materials used for enzyme immobilization of these oxidoreductase enzymes for environmental applications. In the presented study, thorough physicochemical characteristics of the support materials was presented. Moreover, various types of reactions and notably operational modes of enzymatic processes for biodegradation of harmful pollutants are summarized, and future trends in use of immobilized oxidoreductases for environmental applications are discussed. Our goal is to provide an improved foundation on which new technological advancements can be made to achieve efficient enzyme-assisted bioremediation.

The effect of operational parameters on the biodegradation of bisphenols by Trametes versicolor laccase immobilized on Hippospongia communis spongin scaffolds

Due to the rapid growth in quantities of phenolic compounds in wastewater, the development of efficient and environmentally friendly methods for their removal becomes a necessity. Thus, in a presented work, for the first time, a novel material, Hippospongia communis spongin-based scaffold, was used as a biopolymeric support for the immobilization of laccase from Trametes versicolor. The resulting biocatalytic systems were used for the biodegradation of three bisphenols: bisphenol A (BPA), bisphenol F (BPF) and bioremoval-resistant bisphenol S (BPS). Optimization of the immobilization and biodegradation methodologies was performed to increase bisphenols removal. The effect of temperature, pH and initial pollutant concentration was evaluated. It was shown that under optimal conditions, almost 100% of BPA (pH5, 30°C) and BPF (pH5, 40°C), and over 40% of BPS (pH4, 30°C) was removed from the solution at a concentration of 2mg/mL. Furthermore, the immobilized laccase exhibited good reusability and storage stability, retaining over 80% of its initial activity after 50days of storage. In addition, the main biodegradation products of BPA and BPF were identified. It was shown that mainly dimers and trimers were formed following the oxidation of bisphenols by the immobilized laccase.

Isopropanol biodegradation by immobilized Paracoccus denitrificans in a three-phase fluidized bed reactor

A three-phase bed bioreactor including a mix of immobilized microbes was used to degrade isopropanol (IPA). The immobilization method was studied and cells immobilized with calcium alginate, polyvinyl alcohol, activated carbon, and SiO₂ were demonstrated to be the best immobilization method for the degradation of 90% of 2 g/L IPA in just 4 days, 1 day earlier than with free cells. Acetone was monitored as an indicator of microbial IPA utilization as the major intermediate of aerobic IPA biodegradation. The bioreactor was operated at hydraulic retention time (HRT) values of 32, 24, 16, 12, and 10 hr, which correspond to membrane fluxes of 0.03, 0.04, 0.06, 0.08, and 0.10 L/m²/hr, respectively. The chemical oxygen demand (COD) removal efficiencies were maintained at 98.0, 97.8, 89.1, 80.6, and 71.1% at a HRT of 32, 24, 16, 12, and 10 hr, respectively, while the IPA degradations were 98.6, 98.3, 90.3, 81.6, and 73.3%, respectively. With a comprehensive consideration of COD removal and economy, the optimal HRT was 24 hr. The results demonstrate the potential of immobilized mixed bacterial consortium in a three-phase fluidized bed reactor system for the aerobic treatment of wastewater containing IPA.

Degradation of chlortetracycline using immobilized laccase on Polyacrylonitrile-biochar composite nanofibrous membrane

The continuous release of antibiotic compounds through wastewater effluent into environment has raised concerns about their potential problems for different organisms. Enzymatic degradation with laccase is a green option for removal of pharmaceutical compounds from aqueous media. In this study, laccase was immobilized onto homemade Polyacrylonitrile-biochar composite nanofibrous membrane and the obtained biocatalyst was employed for removal of chlortetracycline, a widely used antibiotic, from aqueous media in continuous mode. The results showed that the immobilized laccase has improved storage, temperature and pH stability compared to free laccase. Also, it retained more than 50% of its initial activity after 7cycles of ABTS oxidation which indicated improved enzyme reusability. Finally, while using immobilized laccase for degradation of chlortetracycline in continuous mode exhibited 58.3%, 40.7% and 22.6% chlortetracycline removal efficiency at flux rates of 1, 2 and 3mL/h∙cm².