In vitro and in vivo anticancer activity of surface modified paclitaxel attached hydroxyapatite and titanium dioxide nanoparticles

Hydroxyapatite-based composites: Excellent materials for environmental remediation and biomedical applications

Given their unique characteristics and properties, Hydroxyapatite (HAp) nanomaterials and nanocomposites have been used in diverse advanced catalytic technologies and in the field of biomedicine, such as drug and protein carriers. This paper examines the structure and properties of the manufactured HAp as well as a variety of synthesis methods, including hydrothermal, microwave-assisted, co-precipitation, sol-gel, and solid-state approaches. Additionally, the benefits and drawbacks of various synthesis techniques and ways to get around them to spur more research are also covered. This literature discusses the various applications, including photocatalytic degradation, adsorptions, and protein and drug carriers. The photocatalytic activity is mainly focused on single-phase, doped-phase, and multi-phase HAp, while the adsorption of dyes, heavy metals, and emerging pollutants by HAp are discussed in the manuscript. Furthermore, the use of HAp in treating bone disorders, drug carriers, and protein carriers is also conferred. In light of this, the development of HAp-based nanocomposites will inspire the next generation of chemists to improve upon and create stable nanoparticles and nanocomposites capable of successfully addressing major environmental concerns. This overview's conclusion offers potential directions for future study into HAp synthesis and its numerous applications.

Metal Oxide Nanoparticles: Review of Synthesis, Characterization and Biological Effects

In the last few years, the progress made in the field of nanotechnology has allowed researchers to develop and synthesize nanosized materials with unique physicochemical characteristics, suitable for various biomedical applications. Amongst these nanomaterials, metal oxide nanoparticles (MONPs) have gained increasing interest due to their excellent properties, which to a great extent differ from their bulk counterpart. However, despite such positive advantages, a substantial body of literature reports on their cytotoxic effects, which are directly correlated to the nanoparticles' physicochemical properties, therefore, better control over the synthetic parameters will not only lead to favorable surface characteristics but may also increase biocompatibility and consequently lower cytotoxicity. Taking into consideration the enormous biomedical potential of MONPs, the present review will discuss the most recent developments in this field referring mainly to synthesis methods, physical and chemical characterization and biological effects, including the pro-regenerative and antitumor potentials as well as antibacterial activity. Moreover, the last section of the review will tackle the pressing issue of the toxic effects of MONPs on various tissues/organs and cell lines.

Novel greenly synthesized titanium dioxide nanoparticles compared to liposomes in drug delivery: in vivo investigation on Ehrlich solid tumor model

AIMS

In a previous work, a pure crystalline titanium dioxide nanoparticles (TiO2NPs) were synthesized by green synthesis technique using Aloe vera leaves extract as reducing agent. In this work, we are aiming to investigate the potential of the novel greenly synthesized TiO2NPs as a nano-drug delivery system for the anticancer drug, doxorubicin (Dox).

MAIN METHODS

The cytotoxicity of the synthesized TiO2NPs was tested on two cell lines; normal human skin fibroblasts (HSF) and breast adenocarcinoma cells (MCF-7). Then, Dox was loaded to both TiO2NPs (Dox- TiO2NPs) and liposomes (Dox-Lip). The loaded nanoparticles were characterized by TEM, FTIR, encapsulation efficiency, particle size and zeta potential measurement. Moreover, in vitro drug release was studied. Ehrlich tumor-bearing mice were used to study the anticancer activity of Dox- TiO2NPs, Dox-Lip, and aqueous Dox solution. Tumor volume, survival rate, and histopathological alterations were compared in all groups.

KEY FINDINGS

Dox was successfully loaded to both liposomes and TiO2NPs with an encapsulation efficiency of 77% and 65%, respectively. The particle size of Dox-TiO2NPs, and Dox-Lip was 14.53 nm, and 103 nm, respectively. The cumulative Dox released from TiO2NPs and liposomes after 4 h was 18 and 46%, respectively.Dox-Lip and Dox-TiO2NPs resulted in the highest degree of tumor growth inhibition with 100% and 83% of treated animals remained alive, respectively.

SIGNIFICANCE

The greenly synthesized TiO2NPs were proved to be as effective as liposomes in enhancing the anticancer activity of Dox.

Review of the Applications of Biomedical Compositions Containing Hydroxyapatite and Collagen Modified by Bioactive Components

Regenerative medicine is becoming a rapidly evolving technique in today’s biomedical progress scenario. Scientists around the world suggest the use of naturally synthesized biomaterials to repair and heal damaged cells. Hydroxyapatite (HAp) has the potential to replace drugs in biomedical engineering and regenerative drugs. HAp is easily biodegradable, biocompatible, and correlated with macromolecules, which facilitates their incorporation into inorganic materials. This review article provides extensive knowledge on HAp and collagen-containing compositions modified with drugs, bioactive components, metals, and selected nanoparticles. Such compositions consisting of HAp and collagen modified with various additives are used in a variety of biomedical applications such as bone tissue engineering, vascular transplantation, cartilage, and other implantable biomedical devices.

Advantages and challenges in nanomedicines for chronic liver diseases: A hepatologist's perspectives

Chronic liver diseases (CLD) are responsible for significant morbidity and mortality worldwide. CLD patients are at a high risk of developing progressive liver fibrosis, cirrhosis, hepatocellular carcinoma (HCC), and subsequent liver failure. To date, there is no specific and effective therapies exist for patients with various forms of CLD. The application of nanotechnology has emerged as a rapidly developing area of interest for the safe and target-specific delivery of poorly aqueous soluble hepatoprotective agents and nucleic acids (siRNA/miRNAs) in CLD. The nanoparticle combination improves bioavailability and plasma stability of drugs with poor aqueous solubility. However, the extent of successful functional delivery of nanoparticles into hepatocytes is often surprisingly low. High Kupffer cells interaction reduces the nanomedicine efficacy. During fibrosis, the extracellular matrix accumulation in the perisinusoidal space restricts nanoparticle delivery to hepatocytes. The availability and uptake of nanoparticles exposure to different cells in the liver microenvironment is as Kupffer cells > sinusoidal endothelial cells > HSCs > hepatocytes. The most widely used strategy to reduce nanoparticles and macrophages interaction is to coat the particle surface with polyethylene glycol. The cationic charged nanoparticles have increased hepatocyte delivery by increased cellular interaction by disrupting the endosomal system via their pH buffering capacity. The immune clearance and toxicity of nanoparticles are mainly unpredictable. Therefore, more elaborate knowledge on exact cellular uptake and intracellular accumulation, trafficking, and endosomal sorting of nanoparticle is the need of the hour to improve the rational carrier design.

Chitosan-Coated Titanium Dioxide-Embedded Paclitaxel Nanoparticles Enhance Anti-Tumor Efficacy Against Osteosarcoma

Objective

Titanium dioxide nanoparticles (TiO₂) nanoparticles have been widely explored in the prevention of cancer risk. Due to the difficult solubility of TiO₂ nanoparticles, it is essential to synthesize new surfactants to increase its bioavailability and anti-tumor activity and reduce its cytotoxicity. Furthermore, oxidative and inflammation are closely associated with the osteosarcoma risk. Chitosan has biocompatibility, antioxidant and anti-inflammatory properties. The effects of chitosan-coated TiO₂-embedded paclitaxel nanoparticles on an osteosarcoma model were explored.

Methods

An osteosarcoma model was established and chitosan-coated TiO₂-embedded paclitaxel nanoparticles were prepared using a freeze-drying strategy. The morphological characteristics of nanoparticles were observed using scanning electron microscopy (SEM). The physicochemical properties of nanoparticle were evaluated by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The cytotoxicity was tested by using human osteoblast cells hFob1.19 and osteosarcoma cells 143B. Osteosarcoma mice were treated with PBS buffer, paclitaxel, TiO₂-embedded paclitaxel and chitosan-coated TiO₂-embedded paclitaxel nanoparticles. The biomarkers of oxidative-inflammatory status, anti-tumor activities and survival rates of the model were measured.

Results

XRD analysis showed that the peaks of chitosan/TiO₂ (anatase) were consistent with those of crystalline TiO₂ and broad phase of chitosan. The FTIR spectrum indicated the relevant functional groups in TiO₂. Chitosan-coated TiO₂-embedded paclitaxel nanoparticles had good biocompatibility and improve antioxidant and anti-inflammatory properties in the osteosarcoma model. Chitosan-coated TiO₂-embedded paclitaxel nanoparticles was less toxic to the cells hFob1.19 and more toxic to the cells 143B than TiO₂-embedded paclitaxel nanoparticles. Chitosan-coated TiO₂-embedded paclitaxel nanoparticles showed significant antitumor activity and increased the survival rate of the osteosarcoma model (P < 0.05).

Conclusions

Chitosan improved anti-tumor potential of TiO₂-embedded paclitaxel nanoparticles in the prevention of osteosarcoma.

Biomedical Applications of TiO2 Nanostructures: Recent Advances

Titanium dioxide (TiO2) nanostructures are one of the most plentiful compounds that have emerged in various fields of technology such as medicine, energy and biosensing. Various TiO2 nanostructures (nanotubes [NTs] and nanowires) have been employed in photoelectrochemical (PEC) biosensing applications, greatly enhancing the detection of targets. TiO2 nanostructures, used as reinforced material or coatings for the bare surface of titanium implants, are excellent additive materials to compensate titanium implants deficiencies-like poor surface interaction with surrounding tissues-by providing nanoporous surfaces and hierarchical structures. These nanostructures can also be loaded by diversified drugs-like osteoporosis drugs, anticancer and antibiotics-and used as local drug delivery systems. Furthermore, TiO2 nanostructures and their derivatives are new emerging antimicrobial agents to overcome human pathogenic microorganisms. However, like all other nanomaterials, toxicity and biocompatibility of TiO2 nanostructures must be considered. This review highlights recent advances, along with the properties and numerous applications of TiO2-based nanostructure compounds in nano biosensing, medical implants, drug delivery and antibacterial fields. Moreover, in the present study, some recent advances accomplished on the pharmaceutical applications of TiO2 nanostructures, as well as its toxicity and biocompatibility, are presented.

Folate conjugation improved uptake and targeting of porous hydroxyapatite nanoparticles containing epirubicin to cancer cells

As hydroxyapatite (HAp) with the hexagonal crystal structure is biocompatible and bioactive. In the present study, HAp nanoparticles were synthesized and functionalized with polyethylene glycol and folic acid. The anticancer drug, epirubicin, was loaded to the folic acid-conjugated polyethylene glycol-coated HAp (FA-PEG-HAp) nanoparticles. The prepared nanoparticles were used for in vitro and in vivo experiments. Particle size analyzer showed that the hydrodynamic size of PEG-HAp and FA-PEG-HAp nanoparticles was 150.3 ± 1.5 nm and 217.2 ± 14.9 nm, respectively. The release behavior of epirubicin from nanoparticles showed an increase in the rate of release in acidic pH. The released drug in acidic pH was 2.5 fold more than pH 7.4. The results of in vitro study indicated an increase in cellular uptake of nanoparticles due to folate ligand. In vivo treatment with both PEG-HAp and FA-PEG-HAp nanoparticles had notably higher inhibition efficacy towards tumor growth than free epirubicin. In conclusion, folate conjugation provided higher uptake and better targeting of hydroxyapatite nanoparticles to cancer cells.

Zinc Oxide nanoparticles induce oxidative and proteotoxic stress in ovarian cancer cells and trigger apoptosis Independent of p53-mutation status

Ovarian cancer continues to be the most lethal among gynecological malignancies and the major cause for cancer-associated mortality among women. Limitations of current ovarian cancer therapeutics is highlighted by the high frequency of drug-resistant recurrent tumors and the extremely poor 5-year survival rates. Zinc oxide nanoparticles (ZnO-NPs) have shown promise in various biomedical applications including utility as anti-cancer agents. Here, we describe the synthesis and characterization of physical properties of ZnO-NPs of increasing particle size (15 nm - 55 nm) and evaluate their benefits as an ovarian cancer therapeutic using established human ovarian cancer cell lines. Our results demonstrate that the ZnO-NPs induce acute oxidative and proteotoxic stress in ovarian cancer cells leading to their death via apoptosis. The cytotoxic effect of the ZnO-NPs was found to increase slightly with a decrease in nanoparticle size. While ZnO-NPs caused depletion of both wild-type and gain-of-function (GOF) mutant p53 protein in ovarian cancer cells, their ability to induce apoptosis was found to be independent of the p53-mutation status in these cells. Taken together, these results highlight the potential of ZnO-NPs to serve as an anti-cancer therapeutic agent for treating ovarian cancers independent of the p53 mutants of the cancer cells.

PVA/SA/TiO2-CUR patch for enhanced wound healing application: In vitro and in vivo analysis

Wound healing is a complex multistep process. Wound healing materials should have good antibacterial activity against wound infection causing microbes. Curcumin has effective antimicrobial activity, anti-inflammatory and antioxidant property. Titanium dioxide (TiO₂) is a biocompatible, nontoxic material used for many biomedical applications. The Usage of curcumin tagged TiO₂ nanoparticles for wound healing activity is promising due to the properties of both curcumin and TiO₂. We have synthesized curcumin tagged TiO₂ nanoparticles. The synthesized materials are characterized with XRD, FTIR and TEM. TiO₂-Cur nanocomposite was incorporated into poly vinyl alcohol (PVA) and sodium alginate (SA) patch. The PVA/SA/TiO₂-Cur patch was prepared by gel casting method. Antibacterial efficiency of PVA/SA/TiO₂-Cur patch was analyzed. Further, in vivo studies conducted on Wister rats confirmed the enhanced wound healing property of the PVA/SA/TiO₂-Cur patch. Our results suggest that this could be an ideal biomaterial for wound dressing applications.

Sustained release of amoxicillin from hydroxyapatite nanocomposite for bone infections

Hydroxyapatite (HAP) is the main constituent of human bone and teeth. Hydroxyapatite nanoparticles are used for the treatment of various bone infections. Nanohydroxyapatite is a biocompatible material. It is used as a drug carrier for drugs and biomolecules for various diseases. Hydroxyapatite nanoparticles are made into nanocomposite with sodium alginate and polyvinyl alcohol. This nanocomposite is used for the sustained release of drugs. It is characterized by various characterization techniques like XRD, FTIR, TEM, and Raman. Hydroxyapatite nanoparticles are coated initially with polyvinyl alcohol and then coated with sodium alginate. Amoxicillin is used as the model drug. Studies on the drug loading and drug release have been done. The release of the drug is sustained for about 30 days. Antimicrobial studies have shown good activity against pathogens. The zone of inhibition is found to be 18 mm for a concentration of 500 µg against Bacillus subtilis and 16 µg against Klebsiella pneumonia.

Fabrication and Use of Poly(d,l-lactide-co-glycolide)-Based Formulations Designed for Modified Release of 5-Fluorouracil

5-fluorouracil (5-FU) is a chemotherapeutic agent that has been used for the treatment of a variety of malignancies since its initial introduction to the clinic in 1957. Owing to its short biological half-life, multiple dosings are generally required to maintain effective 5-FU plasma concentrations throughout the therapeutic period. Clinical studies have shown that continuous 5-FU administration is generally superior to bolus injection as exhibited by lower toxicities and increased therapeutic efficacy. Optimal therapeutic efficacy, however, is often compromised by the limiting therapeutic index. Whilst oral formulations are also used, these suffer from the drawbacks of variable bioavailability and first-pass metabolism. As a result, sustained release formulations of 5-FU have been investigated in an effort to mimic the kinetics of continuous infusion particularly for situations where local delivery is considered appropriate. The biocompatible, biodegradable, and highly tunable synthetic polymer, poly(d,l-lactide-co-glycolide) (PLGA), is widely used as a vector for sustained drug delivery, however, issues such as insufficient loading and inappropriate burst release kinetics have dogged progress into the clinic for small hydrophilic drugs such as 5-FU. This review provides introductory information about the mechanism of action, pharmacokinetic and physicochemical properties, and clinical use of 5-FU that have contributed to the development of PLGA-based 5-FU release platforms. In addition, this review provides information on fabrication methods used for a range of 5-FU-loaded PLGA formulations and discusses factors affecting the release kinetics of 5-FU as well as the in vitro and in vivo antitumor or antiproliferative efficacy of these platforms.

Toxicity mechanism of titanium dioxide and zinc oxide nanoparticles against food pathogens

Food preservation is an important field of research. It extends the shelf life of major food products. Our current study is based on food preservation through TiO₂ and ZnO nanoparticles. TiO₂ and ZnO are biocompatible nanomaterial. The biocompatibility of the materials were established through toxicity studies on cell lines. Titanium dioxide and Zinc Oxide nanoparticle were synthesized by wet chemical process. They are characterized by X-Ray diffraction and TEM. The antibacterial activities of both the materials were analysed to ensure their effectiveness as food preservative against Salmonella typhi, Klebsiella pneumoniae and Shigella flexneri. The results indicates that TiO₂ and ZnO nanoparticle inhibits Salmonella, Klebsiella and Shigella. The mode of action is by the generation of ROS in cases of Salmonella, Klebsiella. Mode of action in Shigella is still unclear. It was also proved that TiO₂ and ZnO nanoparticle are biocompatible materials.

Calcium Phosphate as a Key Material for Socially Responsible Tissue Engineering

Socially responsible technologies are designed while taking into consideration the socioeconomic, geopolitical and environmental limitations of regions in which they will be implemented. In the medical context, this involves making therapeutic platforms more accessible and affordable to patients in poor regions of the world wherein a given disease is endemic. This often necessitates going against the reigning trend of making therapeutic nanoparticles ever more structurally complex and expensive. However, studies aimed at simplifying materials and formulations while maintaining the functionality and therapeutic response of their more complex counterparts seldom provoke a significant interest in the scientific community. In this review we demonstrate that such compositional simplifications are meaningful when it comes to the design of a solution for osteomyelitis, a disease that is in its natural, non-postoperative form particularly prevalent in the underdeveloped parts of the world wherein poverty, poor sanitary conditions, and chronically compromised defense lines of the immune system are the norm. We show that calcium phosphate nanoparticles, which are inexpensive to make, could be chemically designed to possess the same functionality as a hypothetic mixture additionally composed of: (a) a bone growth factor; (b) an antibiotic for prophylactic or anti-infective purposes; (c) a bisphosphonate as an antiresorptive compound; (d) a viral vector to enable the intracellular delivery of therapeutics; (e) a luminescent dye; (f) a radiographic component; (g) an imaging contrast agent; (h) a magnetic domain; and (i) polymers as viscous components enabling the injectability of the material and acting as carriers for the sustained release of a drug. In particular, calcium phosphates could: (a) produce tunable drug release profiles; (b) take the form of viscous and injectable, self-setting pastes; (c) be naturally osteo-inductive and inhibitory for osteoclastogenesis; (d) intracellularly deliver bioactive compounds; (e) accommodate an array of functional ions; (f) be processed into macroporous constructs for tissue engineering; and (g) be naturally antimicrobial. All in all, we see in calcium phosphates the presence of a protean nature whose therapeutic potentials have been barely tapped into.

Ion-doping as a strategy to modulate hydroxyapatite nanoparticle internalization

Although it is widely acknowledged that ionic substitutions on bulk hydroxyapatite substrates have a strong impact on their biological performance, little is known of their effect on nanoparticles (NPs) especially when used for gene transfection or drug delivery. The fact that NPs would be internalized poses many questions but also opens up many new possibilities. The objective of the present work is to synthesize and assess the effect of a series of hydroxyapatite-like (HA) NPs doped with various ions on cell behavior, i.e. carbonate, magnesium and co-addition. We synthesized NPs under similar conditions to allow comparison of results and different aspects in addition to assessing the effect of the doping ion(s) were investigated: (1) the effect of performing the cell culture study on citrate-dispersed NPs and on agglomerated NPs, (2) the effect of adding/excluding 10% of foetal bovine serum (FBS) in the cell culture media and (3) the type of cell, i.e. MG-63 versus rat mesenchymal stem cells (rMSCs). The results clearly demonstrated that Mg-doping had a major effect on MG-63 cells with high cytotoxicity but not to rMSCs. This was a very important finding because it proved that doping could be a tool to modify NP internalization. The results also suggest that NP surface charge had a large impact on MG-63 cells and prevents their internalization if it is too negative-this effect was less critical for rMSCs.

Acute and subchronic toxicity analysis of surface modified paclitaxel attached hydroxyapatite and titanium dioxide nanoparticles

Nanoparticles are widely used for targeted drug delivery applications. Surface modification with appropriate polymer and ligands is carried out to target the drug to the affected area. Toxicity analysis is carried out to evaluate the safety of the surface modified nanoparticles. In this study, paclitaxel attached, folic acid functionalized, polyethylene glycol modified hydroxyapatite and titanium dioxide nanoparticles were used for targeted drug delivery system. The toxicological behavior of the system was studied in vivo in rats and mice. Acute and subchronic studies were carried out. Biochemical, hematological, and histopathological analysis was also done. There were no significant alterations in the biochemical parameters at a low dosage. There was a small change in alkaline phosphatase (ALP) level at a high dosage. The results indicate a safe toxicological profile.

An insight into functionalized calcium based inorganic nanomaterials in biomedicine: Trends and transitions

Over the recent years the use of biocompatible and biodegradable nanoparticles in biomedicine has become a significant priority. Calcium based ceramic nanoparticles like calcium phosphate (CaP) and calcium carbonate (CaCO3) are therefore considered as attractive carriers as they are naturally present in human body with nanosize range. Their application in tissue engineering and localized controlled delivery of bioactives for bones and teeth is well established now, but recently their use has increased significantly as carrier of bioactives through other routes also. These delivery systems have become most potential alternatives to other commonly used delivery system because of their cost effectiveness, biodegradability, chemical stability, controlled and stimuli responsive behaviour. This review comprehensively covers their characteristic features, method of preparation and applications but the thrust is to focus their recent development, functionalization and use in systemic delivery. On the same platform mineralization of other nanoparticulate delivery system which has widened their application drug delivery will be discussed. The emphasis has been given on their pH dependent properties which make them excellent carriers for tumour targeting and intracellular delivery. Finally this review also attempts to discuss their drawback which limits their clinical utility.