An insight into functionalized calcium based inorganic nanomaterials in biomedicine: Trends and transitions

CaCO3 nanoplatform for cancer treatment: drug delivery and combination therapy

The use of nanocarriers for drug delivery has opened up exciting new possibilities in cancer treatment. Among them, calcium carbonate (CaCO3) nanocarriers have emerged as a promising platform due to their exceptional biocompatibility, biosafety, cost-effectiveness, wide availability, and pH-responsiveness. These nanocarriers can efficiently encapsulate a variety of small-molecule drugs, proteins, and nucleic acids, as well as co-encapsulate multiple drugs, providing targeted and sustained drug release with minimal side effects. However, the effectiveness of single-drug therapy using CaCO3 nanocarriers is limited by factors such as multidrug resistance, tumor metastasis, and recurrence. Combination therapy, which integrates multiple treatment modalities, offers a promising approach for tackling these challenges by enhancing efficacy, leveraging synergistic effects, optimizing therapy utilization, tailoring treatment approaches, reducing drug resistance, and minimizing side effects. CaCO3 nanocarriers can be employed for combination therapy by integrating drug therapy with photodynamic therapy, photothermal therapy, sonodynamic therapy, immunotherapy, radiation therapy, radiofrequency ablation therapy, and imaging. This review provides an overview of recent advancements in CaCO3 nanocarriers for drug delivery and combination therapy in cancer treatment over the past five years. Furthermore, insightful perspectives on future research directions and development of CaCO3 nanoparticles as nanocarriers in cancer treatment are discussed.

CaCO3 Nanoparticles Delivering MicroRNA-200c Suppress Oral Squamous Cell Carcinoma

MicroRNA (miR)-200c suppresses the initiation and progression of oral squamous cell carcinoma (OSCC), the most prevalent head and neck cancer with high recurrence, metastasis, and mortality rates. However, miR-200c-based gene therapy to inhibit OSCC growth has yet to be reported. To develop an miR-based gene therapy to improve the outcomes of OSCC treatment, this study investigates the feasibility of plasmid DNA (pDNA) encoding miR-200c delivered via nonviral CaCO3-based nanoparticles to inhibit OSCC tumor growth. CaCO3-based nanoparticles with various ratios of CaCO3 and protamine sulfate (PS) were used to transfect pDNA encoding miR-200c into OSCC cells, and the efficiency of these nanoparticles was evaluated. The proliferation, migration, and associated oncogene production, as well as in vivo tumor growth for OSCC cells overexpressing miR-200c, were also quantified. It was observed that, while CaCO3-based nanoparticles improve transfection efficiencies of pDNA miR-200c, the ratio of CaCO3 to PS significantly influences the transfection efficiency. Overexpression of miR-200c significantly reduced proliferation, migration, and oncogene expression of OSCC cells, as well as the tumor size of cell line-derived xenografts (CDX) in mice. In addition, a local administration of pDNA miR-200c using CaCO3 delivery significantly enhanced miR-200c transfection and suppressed tumor growth of CDX in mice. These results strongly indicate that the nanocomplexes of CaCO3/pDNA miR-200c may potentially be used to reduce oral cancer recurrence and improve clinical outcomes in OSCC treatment, while more comprehensive examinations to confirm the safety and efficacy of the CaCO3/pDNA miR-200c system using various preclinical models are needed.

CaCO 3 Nanoparticles Delivering MicroRNA-200c Suppress Oral Squamous Cell Carcinoma

MicroRNA (miR)-200c suppresses the initiation and progression of oral squamous cell carcinoma (OSCC), the most prevalent head and neck cancer with high recurrence, metastasis, and mortality rates. However, miR-200c -based gene therapy to inhibit OSCC growth and metastasis has yet to be reported. To develop an miR-based gene therapy to improve the outcomes of OSCC treatment, this study investigates the feasibility of plasmid DNA encoding miR-200c delivered via non-viral CaCO 3 -based nanoparticles to inhibit OSCC tumor growth. CaCO 3 -based nanoparticles with various ratios of CaCO 3 and protamine sulfate (PS) were utilized to transfect pDNA encoding miR-200c into OSCC cells and the efficiency of these nanoparticles was evaluated. The proliferation, migration, and associated oncogene production, as well as in vivo tumor growth for OSCC cells overexpressing miR-200c were also quantified. It was observed that, while CaCO 3 -based nanoparticles improve transfection efficiencies of pDNA miR-200c , the ratio of CaCO 3 to PS significantly influences the transfection efficiency. Overexpression of miR-200c significantly reduced proliferation, migration, and oncogene expression of OSCC cells, as well as the tumor size of cell line-derived xenografts (CDX) in mice. In addition, a local administration of pDNA miR-200c using CaCO 3 delivery significantly enhanced miR-200c transfection and suppressed tumor growth of CDX in mice. These results strongly indicate that the nanocomplexes of CaCO 3 /pDNA miR-200c may potentially be used to reduce oral cancer recurrence and metastasis and improve clinical outcomes in OSCC treatment. (227 words).

Nanovaccines against Viral Infectious Diseases

Infectious diseases have always been regarded as one of the greatest global threats for the last century. The current ongoing COVID-19 pandemic caused by SARS-CoV-2 is living proof that the world is still threatened by emerging infectious diseases. Morbidity and mortality rates of diseases caused by Coronavirus have inflicted devastating social and economic outcomes. Undoubtedly, vaccination is the most effective method of eradicating infections and infectious diseases that have been eradicated by vaccinations, including Smallpox and Polio. To date, next-generation vaccine candidates with novel platforms are being approved for emergency use, such as the mRNA and viral vectored vaccines against SARS-CoV-2. Nanoparticle based vaccines are the perfect candidates as they demonstrated targeted antigen delivery, improved antigen presentation, and sustained antigen release while providing self-adjuvanting functions to stimulate potent immune responses. In this review, we discussed most of the recent nanovaccines that have found success in immunization and challenge studies in animal models in comparison with their naked vaccine counterparts. Nanovaccines that are currently in clinical trials are also reviewed.

Recent Advances of Calcium Carbonate Nanoparticles for Biomedical Applications

Calcium carbonate nanoparticles have been widely used in biomedicine due to their biocompatibility and biodegradability. Recently, calcium carbonate nanoparticles are largely integrated with imaging contrast and therapeutic agents for various imaging and therapeutic approaches. In this review, we first described the advantages and preparation methods of calcium carbonate nanoparticles, then the state-of-the-art progress of calcium carbonate nanoparticles in diagnosis, treatment and theranostics was summarized. Finally, we discussed the challenges and recommendations for future studies of the calcium carbonate nanoparticles.

Advances in Antitumor Nano-Drug Delivery Systems of 10-Hydroxycamptothecin

10-Hydroxycamptothecin (HCPT) is a natural plant alkaloid from Camptotheca that shows potent antitumor activity by targeting intracellular topoisomerase I. However, factors such as instability of the lactone ring and insolubility in water have limited the clinical application of this drug. In recent years, unprecedented advances in biomedical nanotechnology have facilitated the development of nano drug delivery systems. It has been found that nanomedicine can significantly improve the stability and water solubility of HCPT. NanoMedicines with different diagnostic and therapeutic functions have been developed to significantly improve the anticancer effect of HCPT. In this paper, we collected reports on HCPT nanomedicines against tumors in the past decade. Based on current research advances, we dissected the current status and limitations of HCPT nanomedicines development and looked forward to future research directions.

Calcium carbonate: controlled synthesis, surface functionalization, and nanostructured materials

Calcium carbonate (CaCO₃) is an important inorganic mineral in biological and geological systems. Traditionally, it is widely used in plastics, papermaking, ink, building materials, textiles, cosmetics, and food. Over the last decade, there has been rapid development in the controlled synthesis and surface modification of CaCO₃, the stabilization of amorphous CaCO₃ (ACC), and CaCO₃-based nanostructured materials. In this review, the controlled synthesis of CaCO₃ is first examined, including Ca²⁺-CO₃^2- systems, solid-liquid-gas carbonation, water-in-oil reverse emulsions, and biomineralization. Advancing insights into the nucleation and crystallization of CaCO₃ have led to the development of efficient routes towards the controlled synthesis of CaCO₃ with specific sizes, morphologies, and polymorphs. Recently-developed surface modification methods of CaCO₃ include organic and inorganic modifications, as well as intensified surface reactions. The resultant CaCO₃ can then be further engineered via template-induced biomineralization and layer-by-layer assembly into porous, hollow, or core-shell organic-inorganic nanocomposites. The introduction of CaCO₃ into nanostructured materials has led to a significant improvement in the mechanical, optical, magnetic, and catalytic properties of such materials, with the resultant CaCO₃-based nanostructured materials showing great potential for use in biomaterials and biomedicine, environmental remediation, and energy production and storage. The influences that the preparation conditions and additives have on ACC preparation and stabilization are also discussed. Studies indicate that ACC can be used to construct environmentally-friendly hybrid films, supramolecular hydrogels, and drug vehicles. Finally, the existing challenges and future directions of the controlled synthesis and functionalization of CaCO₃ and its expanding applications are highlighted.

Applications of Calcium-Based Nanomaterials in Osteoporosis Treatment

With rapidly aging populations worldwide, osteoporosis has become a serious global public health problem. Caused by disordered systemic bone remodeling, osteoporosis manifests as progressive loss of bone mass and microarchitectural deterioration of bone tissue, increasing the risk of fractures and eventually leading to osteoporotic fragility fractures. As fracture risk increases, antiosteoporosis treatments transition from nonpharmacological management to pharmacological intervention, and finally to the treatment of fragility fractures. Calcium-based nanomaterials (CBNMs) have unique advantages in osteoporosis treatment because of several characteristics including similarity to natural bone, excellent biocompatibility, easy preparation and functionalization, low pH-responsive disaggregation, and inherent pro-osteogenic properties. By combining additional ingredients, CBNMs can play multiple roles to construct antiosteoporotic biomaterials with different forms. This review covers recent advances in CBNMs for osteoporosis treatment. For ease of understanding, CBNMs for antiosteoporosis treatment can be classified as locally applied CBNMs, such as implant coatings and filling materials for osteoporotic bone regeneration, and systemically administered CBNMs for antiosteoporosis treatment. Locally applied CBNMs for osteoporotic bone regeneration develop faster than the systemically administered CBNMs, an important consideration given the serious outcomes of fragility fractures. Nevertheless, many innovations in construction strategies and preparation methods have been applied to build systemically administered CBNMs. Furthermore, with increasing interest in delaying osteoporosis progression and avoiding fragility fracture occurrence, research into systemic administration of CBNMs for antiosteoporosis treatment will have more development prospects. Deep understanding of the CBNM preparation process and optimizing CBNM properties will allow for increased application of CBNMs in osteoporosis treatments in the future.

Oral delivery of proteins and peptides: Challenges, status quo and future perspectives

Proteins and peptides (PPs) have gradually become more attractive therapeutic molecules than small molecular drugs due to their high selectivity and efficacy, but fewer side effects. Owing to the poor stability and limited permeability through gastrointestinal (GI) tract and epithelia, the therapeutic PPs are usually administered by parenteral route. Given the big demand for oral administration in clinical use, a variety of researches focused on developing new technologies to overcome GI barriers of PPs, such as enteric coating, enzyme inhibitors, permeation enhancers, nanoparticles, as well as intestinal microdevices. Some new technologies have been developed under clinical trials and even on the market. This review summarizes the history, the physiological barriers and the overcoming approaches, current clinical and preclinical technologies, and future prospects of oral delivery of PPs.

Edible CaCO3 nanoparticles stabilized Pickering emulsion as calcium-fortified formulation

Background

Nanoparticles assembled from food-grade calcium carbonate have attracted attention because of their biocompatibility, digestibility, particle and surface features (such as size, surface area, and partial wettability), and stimuli-responsiveness offered by their acid-labile nature.

Results

Herein, a type of edible oil-in-water Pickering emulsion was structured by calcium carbonate nanoparticles (CaCO₃ NPs; mean particle size: 80 nm) and medium-chain triglyceride (MCT) for delivery of lipophilic drugs and simultaneous oral supplementation of calcium. The microstructure of the as-made CaCO₃ NPs stabilized Pickering emulsion can be controlled by varying the particle concentration (c) and oil volume fraction (φ). The emulsification stabilizing capability of the CaCO₃ NPs also favored the formation of high internal phase emulsion at a high φ of 0.7–0.8 with excellent emulsion stability at room temperature and at 4 °C, thus protecting the encapsulated lipophilic bioactive, vitamin D3 (VD3), against degradation. Interestingly, the structured CaCO₃ NP-based Pickering emulsion displayed acid-trigged demulsification because of the disintegration of the CaCO₃ NPs into Ca²⁺ in a simulated gastric environment, followed by efficient lipolysis of the lipid in simulated intestinal fluid. With the encapsulation and delivery of the emulsion, VD3 exhibited satisfying bioavailability after simulated gastrointestinal digestion.

Conclusions

Taken together, the rationally designed CaCO₃ NP emulsion system holds potential as a calcium-fortified formulation for food, pharmaceutical and biomedical applications.

Enhance transgene responses through improving cellular uptake and intracellular trafficking by bio-inspired non-viral vectors

Background

Gene therapy remains a significant challenge due to lots of barriers limiting the genetic manipulation technologies. As for non-viral delivery vectors, they often suffer insufficient performance due to inadequate cellular uptake and gene degradation in endosome or lysosome. The importance of overcoming these conserved intracellular barriers is increasing as the delivery of genetic cargo.

Results

A surface-functionalized non-viral vector involving the biomimetic mannitol moiety is initiated, which can control the cellular uptake and promote the caveolae-mediated pathway and intracellular trafficking, thus avoiding acidic and enzymatic lysosomal degradation of loaded gene internalized by clathrin-mediated pathway. Different degrees of mannitol moiety are anchored onto the surface of the nanoparticles to form bio-inspired non-viral vectors and CaP-MA-40 exhibits remarkably high stability, negligible toxicity, and significantly enhanced transgene expression both in vitro and in vivo.

Conclusions

This strategy highlights a paradigmatic approach to construct vectors that need precise intracellular delivery for innovative applications.

Calcium Phosphate Nanoparticles-Based Systems for RNAi Delivery: Applications in Bone Tissue Regeneration

Bone-related injury and disease constitute a significant global burden both socially and economically. Current treatments have many limitations and thus the development of new approaches for bone-related conditions is imperative. Gene therapy is an emerging approach for effective bone repair and regeneration, with notable interest in the use of RNA interference (RNAi) systems to regulate gene expression in the bone microenvironment. Calcium phosphate nanoparticles represent promising materials for use as non-viral vectors for gene therapy in bone tissue engineering applications due to their many favorable properties, including biocompatibility, osteoinductivity, osteoconductivity, and strong affinity for binding to nucleic acids. However, low transfection rates present a significant barrier to their clinical use. This article reviews the benefits of calcium phosphate nanoparticles for RNAi delivery and highlights the role of surface functionalization in increasing calcium phosphate nanoparticles stability, improving cellular uptake and increasing transfection efficiency. Currently, the underlying mechanistic principles relating to these systems and their interplay during in vivo bone formation is not wholly understood. Furthermore, the optimal microRNA targets for particular bone tissue regeneration applications are still unclear. Therefore, further research is required in order to achieve the optimal calcium phosphate nanoparticles-based systems for RNAi delivery for bone tissue regeneration.

Highly Porous Amorphous Calcium Phosphate for Drug Delivery and Bio-Medical Applications

Amorphous calcium phosphate (ACP) has shown significant effects on the biomineralization and promising applications in bio-medicine. However, the limited stability and porosity of ACP material restrict its practical applications. A storage stable highly porous ACP with Brunauer-Emmett-Teller surface area of over 400 m2/g was synthesized by introducing phosphoric acid to a methanol suspension containing amorphous calcium carbonate nanoparticles. Electron microscopy revealed that the porous ACP was constructed with aggregated ACP nanoparticles with dimensions of several nanometers. Large angle X-ray scattering revealed a short-range atomic order of <20 Å in the ACP nanoparticles. The synthesized ACP demonstrated long-term stability and did not crystallize even after storage for over 14 months in air. The stability of the ACP in water and an α-MEM cell culture medium were also examined. The stability of ACP could be tuned by adjusting its chemical composition. The ACP synthesized in this work was cytocompatible and acted as drug carriers for the bisphosphonate drug alendronate (AL) in vitro. AL-loaded ACP released ~25% of the loaded AL in the first 22 days. These properties make ACP a promising candidate material for potential application in biomedical fields such as drug delivery and bone healing.

Nanoparticle- and Nanoporous-Membrane-Mediated Delivery of Therapeutics

Pharmaceutical particulates and membranes possess promising prospects for delivering drugs and bioactive molecules with the potential to improve drug delivery strategies like sustained and controlled release. For example, inorganic-based nanoparticles such as silica-, titanium-, zirconia-, calcium-, and carbon-based nanomaterials with dimensions smaller than 100 nm have been extensively developed for biomedical applications. Furthermore, inorganic nanoparticles possess magnetic, optical, and electrical properties, which make them suitable for various therapeutic applications including targeting, diagnosis, and drug delivery. Their properties may also be tuned by controlling different parameters, e.g., particle size, shape, surface functionalization, and interactions among them. In a similar fashion, membranes have several functions which are useful in sensing, sorting, imaging, separating, and releasing bioactive or drug molecules. Engineered membranes have been developed for their usage in controlled drug delivery devices. The latest advancement in the technology is therefore made possible to regulate the physico-chemical properties of the membrane pores, which enables the control of drug delivery. The current review aims to highlight the role of both pharmaceutical particulates and membranes over the last fifteen years based on their preparation method, size, shape, surface functionalization, and drug delivery potential.

Calcium phosphate particles stimulate exosome secretion from phagocytes for the enhancement of drug delivery

Exosomes are attractive potential carriers for drug delivery because of their natural function of transferring biomolecules among cells without eliciting immune responses. However, an obstacle to the application of exosomes for drug delivery is the difficulty in collecting sufficient numbers of these vesicles. In this study, we demonstrate treatment with calcium phosphate (CaP) particles could increase over two-fold the number of exosomes secreted from macrophage-like RAW264.7 cells and monocyte-like THP-1 cells. CaP particles were easily internalized into cells and dissolved in acidic late-endosomes or lysosomes, resulting in the rupture of their membranes followed by the release of Ca²⁺ into cytosol. Moreover, we found that exosomes secreted from cells treated with CaP particles are not contaminated by the Ca²⁺ released from CaP; the Ca²⁺ contents in exosomes secreted from CaP particle-treated cells were similar to that in exosomes from untreated control cells. This study highlights the potential for the efficient production of exosomes using CaP particles for drug delivery.

Nanoencapsulation of benznidazole in calcium carbonate increases its selectivity to Trypanosoma cruzi

Chagas disease is a public health problem, affecting about 7 million people worldwide. Benznidazole (BZN) is the main treatment option, but it has limited effectiveness and can cause severe adverse effects. Drug delivery through nanoparticles has attracted the interest of the scientific community aiming to improve therapeutic options. The aim of this study was to evaluate the cytotoxicity of benznidazole-loaded calcium carbonate nanoparticles (BZN@CaCO3) on Trypanosoma cruzi strain Y. It was observed that BZN@CaCO3 was able to reduce the viability of epimastigote, trypomastigote and amastigote forms of T. cruzi with greater potency when compared with BZN. The amount of BZN necessary to obtain the same effect was up to 25 times smaller when loaded with CaCO3 nanoparticles. Also, it was observed that BZN@CaCO3 enhanced the selectivity index. Furthermore, the cell-death mechanism induced by both BZN and BZN@CaCO3 was evaluated, indicating that both substances caused necrosis and changed mitochondrial membrane potential.

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Tailored design of multifunctional and programmable pH-responsive self-assembling polypeptides as drug delivery nanocarrier for cancer therapy

Breast cancer has become the second leading cause of cancer-related mortality in female wherein more than 90% of breast cancer-related death results from cancer metastasis to distant organs at advanced stage. The purpose of this study is to develop biodegradable nanoparticles composed of natural polypeptides and calcium phosphate (CaP) with sequential pH-responsivity to tumor microenvironments for active targeted drug delivery. Two different amphiphilic copolymers, poly(ethylene glycol)₃₄₀₀-aconityl linkage-poly(l-glutamic acid)₁₅-poly(l-histidine)₁₀-poly(l-leucine)₁₀ and LyP1-poly(ethylene glycol)₁₁₀₀-poly(l-glutamic acid)₁₅-poly(l-histidine)₁₀-poly(l-leucine)₁₀, were exploited to self-assemble into micelles in aqueous phase. The bio-stable nanoparticles provide three distinct functional domains: the anionic PGlu shell for CaP mineralization, the protonation of PHis segment for facilitating anticancer drug release at target site, and the hydrophobic core of PLeu for encapsulation of anticancer drugs. Furthermore, the hydrated PEG outer corona is used for prolonging circulation time, while the active targeting ligand, LyP-1, is served to bind to breast cancer cells and lymphatic endothelial cells in tumor for inhibiting metastasis. Mineralized DOX-loaded nanoparticles (M-DOX NPs) efficiently prevent the drug leakage at physiological pH value and facilitate the encapsulated drug release at acidic condition when compared to DOX-loaded nanoparticles (DOX NPs). M-DOX NPs with LyP-1 targeting ligand effectively accumulated in MDA-MB-231 breast cancer cells. The inhibition effect on cell proliferation also enhances with time, illustrating the prominent anti-tumor efficacy. Moreover, the in vitro metastatic inhibition model shows the profound inhibition effect of inhibitory nanoparticles. In brief, this self-assembling peptide-based drug delivery nanocarrier with multifunctionality and programmable pH-sensitivity is of great promise and potential for anti-cancer therapy.

STATEMENT OF SIGNIFICANCE

This tailored-design polypeptide-based nanoparticles with self-assembling and programmable stimulus-responsive properties enable to 1) have stable pH in physiological value with a low level of drug loss and effectively release the encapsulated drug with pH variations according to the tumor microenvironment, 2) enhance targeting ability to hard-to-treat breast cancer cells and activate endothelial cells (tumor region), 3) significantly inhibit the growth and prevent from malignant metastasis of cancer cells in consonance with promising anti-tumor efficacy, and 4) make tumors stick to localized position so that these confined solid tumors can be more accessible by different treatment modalities. This work contributes to designing a programmable pH-responsive drug delivery system based on the tailor-designed polypeptides.

One-step formation of lipid-polyacrylic acid-calcium carbonate nanoparticles for co-delivery of doxorubicin and curcumin

A doxorubicin (Dox) and curcumin (Cur) combination treatment regimen has been widely studied in pre-clinical research. However, the nanoparticles developed for this combination therapy require a consecutive drug loading process because of the different water-solubility of these drugs. This study provides a strategy for the "one-step" formation of nanoparticles encapsulating both Dox and Cur. We took advantage of polyacrylic acid (PAA) and calcium carbonate (CaCO₃) to realise a high drug entrapment efficiency (EE) and pH-sensitive drug release using a simplified preparation method. Optimisation of lipid ratios and concentrations of CaCO₃ was conducted. Under optimal conditions, the mean diameter of PEGylated lipid/PAA/CaCO₃ nanoparticles with encapsulated Cur and Dox (LPCCD) was less than 100 nm. An obvious pH-sensitive release of both drugs was observed, with different Dox and Cur release rates. Successful co-delivery of Cur and Dox was achieved via LPCCD on HepG2 cells. LPCCD altered the bio-distribution of Dox and Cur in vivo and decreased Dox-induced cardiotoxicity. The current investigation has developed an efficient ternary system for co-delivery of Dox and Cur to tumours, using a "one-step" formation resulting in nanoparticles possessing remarkable pH-sensitive drug release behaviour, which may be valuable for further clinical studies and eventual clinical application.

CaCO3/Tetraethylenepentamine-Graphene Hollow Microspheres as Biocompatible Bone Drug Carriers for Controlled Release

CaCO₃ is one kind of important biological mineral, which widely exists in coral, shell, and other organisms. Since it is similar to bone tissue elements and has good biocompatibility, it was very suitable as a candidates for bone drug carriers. In this work, we used tetraethylenepentamine-graphene (rGO-TEPA) sheet matrices induction of CaCO₃ mineralization and successfully constructed CaCO₃/rGO-TEPA drug carriers with a hollow structure and rough surface. As potential drug carriers, doxorubicin (DOX) loading and release measurements were carried out. It showed that load efficiency was 94.7% and the release efficiencies were 13.8% and 91.7% at values of pH 7.4 and 5.0. The as-prepared drug carriers showed some appealing advantages, such as the pH-sensitive release characteristics and mild storage-release behaviors. The excellent biocompatibility and nontoxicity of CaCO₃/rGO-TEPA hybrid microspheres were tested by the cell viability of mouse preosteoblast cells (MC3T3-E1). And cytotoxicity with human osteosarcoma cells (MG-63) was carried out to demonstrate the drug release effect in the cells system. Therefore, the CaCO₃/rGO-TEPA hybrid microspheres would be a competitive alternative in bone drug carriers.

Vitamin B6 Tethered Endosomal pH Responsive Lipid Nanoparticles for Triggered Intracellular Release of Doxorubicin

This study reports the development of Vitamin B6 (VitB6) modified pH sensitive charge reversal nanoparticles for efficient intracellular delivery of Doxorubicin (DOX). Herein, VitB6 was conjugated to stearic acid, and the nanoparticles of the lipid were formulated by solvent injection method (DOX-B6-SA-NP). Because of the pK_a (5.6) of VitB6, DOX-B6-SA-NP showed positive charge and enhanced release of DOX at pH 5. Confocal microscopy illustrated that DOX-B6-SA-NP treatment kept higher DOX accumulation inside the cells than conventional pH insensitive lipid nanoparticles (DOX-SA-NP). The cationic charge of nanoparticles subsequently facilitated the endosomal escape and promoted the nuclear accumulation of DOX. Furthermore, in vitro cytotoxicity, apoptosis, cell cycle arrest, and mitochondrial membrane depolarization studies supported the enhanced efficacy of DOX-B6-SA-NP in comparison to free DOX and DOX-SA-NP. Intravenous pharmacokinetics and biodistribution investigations indicated that pH sensitive nanoparticles can significantly prolong the blood circulation time of DOX in biological system and increase the drug accumulation to tumor site. Consequent to this, DOX-B6-SA-NP also exhibited much enhanced therapeutic efficacy and lower toxicity in tumor-bearing rats compared to free DOX. The reduction in toxicity was confirmed by histological and survival analysis. In conclusion, these results suggest that the VitB6 modified charge reversal nanoparticles can be a novel platform for the successful delivery of anticancer drugs.

Selective anticancer activity of hydroxyapatite/chitosan-poly(d,l)-lactide-co-glycolide particles loaded with an androstane-based cancer inhibitor

In an earlier study we demonstrated that hydroxyapatite nanoparticles coated with chitosan-poly(d,l)-lactide-co-glycolide (HAp/Ch-PLGA) target lungs following their intravenous injection into mice. In this study we utilize an emulsification process and freeze drying to load the composite HAp/Ch-PLGA particles with 17β-hydroxy-17α-picolyl-androst-5-en-3β-yl-acetate (A), a chemotherapeutic derivative of androstane and a novel compound with a selective anticancer activity against lung cancer cells. ¹H NMR and ¹³C NMR techniques confirmed the intact structure of the derivative A following its entrapment within HAp/Ch-PLGA particles. The thermogravimetric and differential thermal analyses coupled with mass spectrometry were used to assess the thermal degradation products and properties of A-loaded HAp/Ch-PLGA. The loading efficiency, as indicated by the comparison of enthalpies of phase transitions in pure A and A-loaded HAp/Ch-PLGA, equaled 7.47wt.%. The release of A from HAp/Ch-PLGA was sustained, neither exhibiting a burst release nor plateauing after three weeks. Atomic force microscopy and particle size distribution analyses were used to confirm that the particles were spherical with a uniform size distribution of d₅₀=168nm. In vitro cytotoxicity testing of A-loaded HAp/Ch-PLGA using MTT and trypan blue dye exclusion assays demonstrated that the particles were cytotoxic to the A549 human lung carcinoma cell line (46±2%), while simultaneously preserving high viability (83±3%) of regular MRC5 human lung fibroblasts and causing no harm to primary mouse lung fibroblasts. In conclusion, composite A-loaded HAp/Ch-PLGA particles could be seen as promising drug delivery platforms for selective cancer therapies, targeting malignant cells for destruction, while having a significantly lesser cytotoxic effect on the healthy cells.

Calcium phosphate nanoparticles-based systems for siRNA delivery

Despite the enormous therapeutic potential of siRNA as a treatment strategy, the delivery is still a problem due to unfavorable biodistribution profiles and poor intracellular bioavailability. Calcium phosphate (CaP) co-precipitate has been used for nearly 40 years for in vitro transfection due to its non-toxic nature and simplicity of preparation. The surface charge of CaP will be tuned into positive by surface modification, which is important for siRNA loading and crossing cell membrane without enzymatic degradation. The new siRNA carrier system will also promote the siRNA escape from lysosome to achieve siRNA sustained delivery and high-efficiency silence. In this review, we focus on the current research activity in the development of CaP nanoparticles for siRNA delivery. These nanoparticles are mainly classified into lipid coated, polymer coated and various other types for discussion.

An NAD(P)H:quinone oxidoreductase 1 (NQO1) enzyme responsive nanocarrier based on mesoporous silica nanoparticles for tumor targeted drug delivery in vitro and in vivo

The synthesis and characterization of an

NAD(P)H

quinone oxidoreductase 1 (NQO1) enzyme responsive nanocarrier based on mesoporous silica nanoparticles (MSNPs) for on-command delivery applications has been described in this paper. Gatekeeping of MSNPs is achieved by the integration of mechanically interlocked rotaxane nanovalves on the surface of MSNPs. The rotaxane nanovalve system is composed of a linear stalk anchoring on the surface of MSNPs, an α-cyclodextrin ring that encircles it and locks the payload "cargo" molecules in the mesopores, and a benzoquinone stopper incorporated at the end of the stalk. The gate opening and controlled release of the cargo are triggered by cleavage of the benzoquinone stopper using an endogenous NQO1 enzyme. In addition to having efficient drug loading and controlled release mechanisms, this smart biocompatible carrier system showed obvious uptake and consequent release of the drug in tumor cells, could selectively induce the tumor cell death and enhance the capability of inhibition of tumor growth in vivo. The controlled drug delivery system demonstrated its use as a potential theranostic material.

Calcium Phosphate as a Key Material for Socially Responsible Tissue Engineering

Socially responsible technologies are designed while taking into consideration the socioeconomic, geopolitical and environmental limitations of regions in which they will be implemented. In the medical context, this involves making therapeutic platforms more accessible and affordable to patients in poor regions of the world wherein a given disease is endemic. This often necessitates going against the reigning trend of making therapeutic nanoparticles ever more structurally complex and expensive. However, studies aimed at simplifying materials and formulations while maintaining the functionality and therapeutic response of their more complex counterparts seldom provoke a significant interest in the scientific community. In this review we demonstrate that such compositional simplifications are meaningful when it comes to the design of a solution for osteomyelitis, a disease that is in its natural, non-postoperative form particularly prevalent in the underdeveloped parts of the world wherein poverty, poor sanitary conditions, and chronically compromised defense lines of the immune system are the norm. We show that calcium phosphate nanoparticles, which are inexpensive to make, could be chemically designed to possess the same functionality as a hypothetic mixture additionally composed of: (a) a bone growth factor; (b) an antibiotic for prophylactic or anti-infective purposes; (c) a bisphosphonate as an antiresorptive compound; (d) a viral vector to enable the intracellular delivery of therapeutics; (e) a luminescent dye; (f) a radiographic component; (g) an imaging contrast agent; (h) a magnetic domain; and (i) polymers as viscous components enabling the injectability of the material and acting as carriers for the sustained release of a drug. In particular, calcium phosphates could: (a) produce tunable drug release profiles; (b) take the form of viscous and injectable, self-setting pastes; (c) be naturally osteo-inductive and inhibitory for osteoclastogenesis; (d) intracellularly deliver bioactive compounds; (e) accommodate an array of functional ions; (f) be processed into macroporous constructs for tissue engineering; and (g) be naturally antimicrobial. All in all, we see in calcium phosphates the presence of a protean nature whose therapeutic potentials have been barely tapped into.

Amphipathic silica nanoparticles induce cytotoxicity through oxidative stress mediated and p53 dependent apoptosis pathway in human liver cell line HL-7702 and rat liver cell line BRL-3A

The aim of this study was to evaluate the potential cytotoxicity and the underlying mechanism of amphipathic silica nanoparticles (SiO2 NPs) exposure to human normal liver HL-7702 cells and rat normal liver BRL-3A cells. Prior to the cellular studies, transmission electron microscopy (TEM), dynamic light scattering (DLS), and X ray diffraction (XRD) were used to characterize SiO2 NPs, which proved the amorphous nature of SiO2 NPs with TEM diameter of 19.8±2.7nm. Further studies proved that exposure to SiO2 NPs dose-dependently induced cytotoxicity as revealed by cell counting kit (CCK-8) and lactate dehydrogenase (LDH) assays, with more severe cytotoxicity in HL-7702 cells than BRL-3A cells. Reactive oxygen species (ROS) and glutathione (GSH) assays showed elevated oxidative stress in both cells. Morphological studies by microscopic observation, Hochest 33258 and AO/EB staining indicated significant apoptotic changes after the cells being exposed to SiO2 NPs. Further studies by western blot indicated that SiO2 NPs exposure to both cells up-regulated p53, Bax and cleaved caspase-3 expression and down-regulated Bcl-2 and caspase-3 levels. Activated caspase-3 activity detected by colorimetric assay kit and caspase-3/7 activity detected by fluorescent real-time detection kit were significantly increased by SiO2 NPs exposure. In addition, antioxidant vitamin C significantly attenuated SiO2 NPs-induced caspase-3 activation, which indicated that SiO2 NPs-induced oxidative stress was involved in the process of HL-7702 and BRL-3A cell apoptosis. Taken together, these results suggested that SiO2 NPs-induced cytotoxicity in HL-7702 and BRL-3A cells was through oxidative stress mediated and p53, caspase-3 and Bax/Bcl-2 dependent pathway and HL-7702 cells were more sensitive to SiO2 NPs-induced cytotoxicity than BRL-3A cells.

Delivery of fluorophores by calcium phosphate-coated nanoliposomes and interaction with Staphylococcus aureus biofilms

The delivery capacity and mechanical stability of calcium phosphate (CaP) coated 1,2-dioleoyl-sn-glycero-3-phosphate (DOPA) liposomes free and adsorbed on bacterial surface was investigated introducing either acridine orange (AO) or 5,10,15,20-Tetrakis(1-methyl-4-pyridinio)porphyrin (TMP) in the aqueous core of the liposomes. The obtained nanomaterials were thoroughly characterized by electron and optical microscopy and by fluorescence techniques. Distribution of the AO and TMP molecules between the aqueous liposomes core and the outer solution was demonstrated by the band shifts and broadening of the excitation-emission matrices and the modified Stern-Volmer model for fluorescence quenching. In aqueous suspensions, c.a. 40% of AO was released to the outer solution while only a small percentage of TMP was observed to reach the outer liposome surface. The nanoliposomes adhesion capacity and the leaking of fluorophore molecules to Staphylococcus aureus (S. aureus) biofilms were further evaluated. A close interaction between liposomes and S. aureus biofilm was evidenced by TEM and SEM imaging. Epifluorescence experiments demonstrated that CaP-coated liposomes have good biofilm staining capability after two hours incubation of the biofilms with the liposomes, thus supporting an important release of the fluorophores when in contact with the biofilm. Altogether, the obtained results strongly suggest that CaP-coated liposomes are capable of activating drug release when in presence of S. aureus biofilms and smears. The studies herein presented, indicate that CaP-coated liposomes are potential vehicles for the selective delivery of drugs to S. aureus biofilms, as is the case of the singlet oxygen photosensitizer TMP, a well known photodynamic antibacterial agent.

Nanoscale bio-platforms for living cell interrogation: current status and future perspectives

The living cell is a complex entity that dynamically responds to both intracellular and extracellular environments. Extensive efforts have been devoted to the understanding intracellular functions orchestrated with mRNAs and proteins in investigation of the fate of a single-cell, including proliferation, apoptosis, motility, differentiation and mutations. The rapid development of modern cellular analysis techniques (e.g. PCR, western blotting, immunochemistry, etc.) offers new opportunities in quantitative analysis of RNA/protein expression up to a single cell level. The recent entries of nanoscale platforms that include kinds of methodologies with high spatial and temporal resolution have been widely employed to probe the living cells. In this tutorial review paper, we give insight into background introduction and technical innovation of currently reported nanoscale platforms for living cell interrogation. These highlighted technologies are documented in details within four categories, including nano-biosensors for label-free detection of living cells, nanodevices for living cell probing by intracellular marker delivery, high-throughput platforms towards clinical current, and the progress of microscopic imaging platforms for cell/tissue tracking in vitro and in vivo. Perspectives for system improvement were also discussed to solve the limitations remains in current techniques, for the purpose of clinical use in future.

Hyaluronic acid anchored paclitaxel nanocrystals improves chemotherapeutic efficacy and inhibits lung metastasis in tumor-bearing rat model

Paclitaxel (PTX) is a first line anti-tumor agent and is widely used in the treatment of breast cancer.

Biomimetic synthesis of needle-like fluorescent calcium phosphate/carbon dot hybrid composites for cell labeling and copper ion detection

We report a biomimetic method to synthesize needle-like calcium phosphate (CaP) using carbon dots (CDs) and sodium carboxymethylcellulose as dual templates. The CaP/CDs were capable of cell labeling and selective detection of copper ions in drinking water.

Antiresorption implant coatings based on calcium alendronate and octacalcium phosphate deposited by matrix assisted pulsed laser evaporation

The integration of an implant material with bone tissue depends on the chemistry and physics of the implant surface. In this study we applied matrix assisted pulsed laser evaporation (MAPLE) in order to synthesize calcium alendronate monohydrate (a bisphosphonate obtained by calcium sequestration from octacalcium phosphate by alendronate) and calcium alendronate monohydrate/octacalcium phosphate composite thin films on titanium substrates. Octacalcium phosphate coatings were prepared as reference material. The powders, which were synthesized in aqueous medium, were suspended in deionised water, frozen at liquid nitrogen temperature and used as targets for MAPLE experiments. The transfer was conducted with a KrF* excimer laser source (λ = 248 nm, τFWHM ≤ 25 ns) in mild conditions of temperature and pressure. XRD, FTIR and SEM analyses confirmed that the coatings contain the same crystalline phases as the as-prepared powder samples. Osteoblast derived from stem cells and osteoclast derived from monocytes of osteoporotic subjects were co-cultured on the coatings up to 14 days. Osteoclast displayed significantly reduced proliferation and differentiation in the presence of calcium alendronate monohydrate, pointing to a clear role of the coatings containing this bisphosphonate on inhibiting excessive bone resorption. At variance, osteoblast production of alkaline phosphatase and type I pro-collagen were promoted by the presence of bisphosphonate, which also decreased the production of interleukin 6. The positive influence towards osteoblast differentiation was even more enhanced in the composite coatings, thanks to the presence of octacalcium phosphate.