Development of photochemical integrated submerged membrane bioreactor for textile dyeing wastewater treatment

Photocatalytic oxidation of antibiotic residue and organic dye pollutant using noble metal-doped ZnO: Reducing environmental and health risks

Water pollution associated with antibiotic residues and colored organic pollutants leads to various potential risks to human health and the environment. This work develops an economical method that is suitable for removing both antibiotic residues and colored organic pollutants from water. The oxidation process based on a noble metal (Ag)-doped zinc oxide photocatalyst (Ag-ZnO) was selected as a potential strategy for investigation. Besides, tetracycline antibiotic residues (A-Tc) and methylene blue-colored organic pollutants (D-Mb) were selected as target contaminants. With light assistance, Ag-ZnO showed significantly improved degradation efficiency for A-Tc and D-Mb at 90.6 and 97.3%, respectively. The advantages of Ag-ZnO are also confirmed by the faster degradation rate constants, which are more than twice as fast as those of the undoped sample. The mineralization process shows that 93.5% and 98.7% of organic carbon were removed from the A-Tc and D-Mb solutions, respectively. The result suggests that antibiotic residues and colored organic pollutants are being converted into inorganic substances. In addition, the benefits of using Ag-ZnO to enhance human health safety, reduce the negative effects on the environment, and decrease treatment costs are discussed.

Developments of electrospinning technology in membrane bioreactor: A review

The necessity for effective wastewater treatment and purification has grown as a result of the increasing pollution issues brought on by industrial and municipal wastewater. Membrane bioreactor (MBR) technology stands out when compared to other treatment methods because of its high efficiency, environmental friendliness, small footprint, and ease of maintenance. However, the development and application of membrane bioreactors has been severely constrained by the higher cost and shorter service life of these devices brought on by membrane biofouling issues resulting from contaminants and bacteria in the water. The nanoscale size of the electrospinning products provides unique microstructure, and the technology facilitates the production of structurally different membranes, or the modification and functionalization of membranes, which makes it possible to solve the membrane fouling problem. Therefore, many current studies have attempted to use electrospinning in MBRs to address membrane fouling and ultimately improve treatment efficacy. Meanwhile, in addition to solving the problem of membrane fouling, the fabrication technology of electrospinning also shows great advantages in constructing thin porous fiber membrane materials with controllable surface wettability and layered structure, which is helpful for the performance enhancement of MBR and expanding innovation. This paper systematically reviews the application and research progress of electrospinning in MBRs. Firstly, the current status of the application of electrospinning technology in various MBRs is introduced, and the relevant measures to solve the membrane fouling based on electrospinning technology are analyzed. Subsequently, some new types of MBRs and new application areas developed with the help of electrospinning technology are introduced. Finally, the limitations and challenges of merging the two technologies are presented, and pertinent recommendations are provided for future research on the use of electrospinning technology in membrane bioreactors.

Mechanisms and Strategies of Advanced Oxidation Processes for Membrane Fouling Control in MBRs: Membrane-Foulant Removal versus Mixed-Liquor Improvement

Membrane bioreactors (MBRs) are well-established and widely utilized technologies with substantial large-scale plants around the world for municipal and industrial wastewater treatment. Despite their widespread adoption, membrane fouling presents a significant impediment to the broader application of MBRs, necessitating ongoing research and development of effective antifouling strategies. As highly promising, efficient, and environmentally friendly chemical methods for water and wastewater treatment, advanced oxidation processes (AOPs) have demonstrated exceptional competence in the degradation of pollutants and inactivation of bacteria in aqueous environments, exhibiting considerable potential in controlling membrane fouling in MBRs through direct membrane foulant removal (MFR) and indirect mixed-liquor improvement (MLI). Recent proliferation of research on AOPs-based antifouling technologies has catalyzed revolutionary advancements in traditional antifouling methods in MBRs, shedding new light on antifouling mechanisms. To keep pace with the rapid evolution of MBRs, there is an urgent need for a comprehensive summary and discussion of the antifouling advances of AOPs in MBRs, particularly with a focus on understanding the realizing pathways of MFR and MLI. In this critical review, we emphasize the superiority and feasibility of implementing AOPs-based antifouling technologies in MBRs. Moreover, we systematically overview antifouling mechanisms and strategies, such as membrane modification and cleaning for MFR, as well as pretreatment and in-situ treatment for MLI, based on specific AOPs including electrochemical oxidation, photocatalysis, Fenton, and ozonation. Furthermore, we provide recommendations for selecting antifouling strategies (MFR or MLI) in MBRs, along with proposed regulatory measures for specific AOPs-based technologies according to the operational conditions and energy consumption of MBRs. Finally, we highlight future research prospects rooted in the existing application challenges of AOPs in MBRs, including low antifouling efficiency, elevated additional costs, production of metal sludge, and potential damage to polymeric membranes. The fundamental insights presented in this review aim to elevate research interest and ignite innovative thinking regarding the design, improvement, and deployment of AOPs-based antifouling approaches in MBRs, thereby advancing the extensive utilization of membrane-separation technology in the field of wastewater treatment.

Improved photocatalytic oxidation of micropollutant in wastewater by solar light: assisted palladium-doped graphitic carbon nitride

The escalating global industrial expansion has led to the extensive release of organic compounds into water bodies, resulting in substantial pollution and posing severe threats to both human health and the ecosystem. Among common micropollutants, bisphenol A (MP-BA) has emerged as a significant endocrine-disrupting chemical with potential adverse effects on human health and the environment. This study aims to develop an efficient photocatalyst, specifically by incorporating palladium-doped graphitic carbon nitride (Pd@GCN), to eliminate MP-BA pollutants present in industrial wastewater. The examination of optical properties and photoluminescence indicates that incorporating Pd into GCN enhances the visible light absorption spectra, which extends beyond 570 nm, and accelerates the separation rate of electron-hole pairs. The photocatalytic degradation efficiency of MP-BA increases from 81.7 to 98.8% as the solution pH rises from 5.0 to 9.0. Moreover, Pd@GCN significantly improves the removal rate of MP-BA in wastewater samples, reaching an impressive 92.8% after 60 min of exposure to solar light. Furthermore, the Pd@GCN photocatalyst exhibits notable reusability over six cycles of MP-BA degradation, indicating its promising potential for the treatment of organic pollutants in wastewater under solar light conditions.

Evaluating membrane bioreactor treatment for the elimination of emerging contaminants using different analytical methods

Since wastewater treatment plants (WWTPs) were not originally designed to eliminate contaminants of emerging concern (CECs), alternative strategies like membrane bioreactor (MBR) technology are gaining importance in achieving effective CEC removal and minimising their environmental impact. In this study, composite wastewater samples were collected from the biggest WWTP in the Basque Country (Galindo, Biscay) and the performance of two secondary treatments (i.e. conventional activated sludge treatment, CAS, and MBR) was assessed. The combination of a suspect screening approach using liquid chromatography tandem high-resolution mass spectrometry (LC-HRMS) and multitarget analysis by gas chromatography-mass spectrometry (GC-MS) allowed the detection of approximately 200 compounds in the WWTP effluents. The estimated removal efficiencies (REs) revealed that only 16 micropollutants exhibited enhanced removal by MBR treatment (RE > 70% or 40 - 60%). The environmental risk posed by the non-eliminated compounds after both treatments remained similar, being anthracene, clarithromycin, bis(2-ethylhexyl) phthalate (DEHP) and dilantin the most concerning pollutants (RQ > 1). The Microtox® bioassay confirmed the MBR's efficiency in removing baseline toxicity, while suggesting a similar performance of CAS treatment. These minimal differences between treatments call into question the worthiness of MBR treatment and emphasise the need to seek more efficient alternative treatment methods.

Nanomaterials in membrane bioreactors: Recent progresses, challenges, and potentials

The use of nanomaterials (NMs) in the fabrication and modification of membranes as well as the coupling of nanomaterial-based processes with membrane processes have been attracted many researchers today. The NMs due to a wide range of types, different chemistry, the possibility of various kinds of functionality, different properties like antibacterial activity, hydrophilicity, and large surface area were applied to enhance the membrane properties. In the membrane bioreactors (MBRs) as a highly successful process of membrane technology in wastewater treatment, the NMs have been applied for improving the efficiency of MBR process. This review assessed the application of NMs both as the modifiers of membrane and as the effective part of hybrid techniques with MBR system for wastewater treatment. The efficiency of NMs blended membranes in the MBR process has been reviewed in terms of antifouling and antibacterial improvement and removal performance of the pollutants. Novel kinds of NMs were recognized and discussed based on their properties and advantages. The NMs-based photocatalytic and electrochemical processes integrated with MBR were reviewed with their benefits and drawbacks. In addition, the effect of the presence of mobilized NPs in the sludge on MBR performance was surveyed. As a result of this review, it can be concluded that nanomaterials generally improve MBR performance. The high flux and antifouling properties can be obtained by adding nanomaterials with hydrophilic and antibacterial properties to the membrane, and further studies are required for photocatalytic NMs applications. In addition, this review shows that the low amounts of NMs in the membrane structure could have an effective influence on the MBR process. Besides, since many studies in the literature are carried out at the laboratory scale, it is thought that pilot and real-scale studies should be carried out to obtain more reliable data.

Photocatalytic nanohybrid membranes for highly efficient wastewater treatment: A comprehensive review

Wastewater is inevitably generated from human activities as part of the life cycle chain that potentially damages the environment. The integration of photocatalytic reaction and membrane separation for wastewater treatment has gained great attention in recent studies. However, there are still many technical limitations for its application such as toxic metal release, catalyst deactivation, fouling/biofouling, polymer disintegration, and separation performance decline. Different types, combinations, and modifications of photocatalysts material combined with membranes such as semiconductor metal oxides, binary/ternary hybrid metal oxides, elemental doped semiconductors, and metal-organic frameworks (MOFs) for improving the performance and compatibility are presented and discussed. The strategies of incorporating photocatalysts into membrane matrix for pursuing the most stable membrane integrity, high photocatalytic efficiency, and excellent perm-selectivity performance in the very recent studies were discussed. This review also outlines the performance enhancement of photocatalytic membranes (PMs) in wastewater treatment and its potential for water reclamation. Photocatalysts enhanced membrane separation by inducing anti-fouling and self-cleaning properties as well as antibacterial activity. Based on the reviewed study, PMs are possible to achieve complete removal of emerging contaminants and ∼99% reduction of bacterial colony that leading on the zero liquid discharge (ZLD). However, the intensive exposure of photo-induced radicals potentially damages the polymeric membrane. Therefore, future studies should be focused on fabricating chemically stable host-membrane material. Moreover, the light source and the membrane module design for the practical application by considering the hydrodynamic and cost-efficiency should be a concern for technology diffusion to the industrial-scale application.

High-performance photocatalytic membranes for water purification in relation to environmental and operational parameters

Growing technologies, increasing population and environmental pollution lead to severe contamination of water and require advanced water treatment technologies. These aspects lead to the need to purify water with advanced smart materials. This paper reviews the recent advances (during the last 5 years) in photocatalytic composite membranes used for water treatment. For this purpose, the authors have reviewed the main materials used in the development of (photocatalytic membranes) PMs, environmental and operational factors affecting the performance of photocatalytic membranes, and the latest developments and applications of PMs in water purifications. The composite photocatalytic membranes show good performance in the removal and degradation of pollutants from water.

Bioremediation of industrial effluents: A synergistic approach

Industrial wastewater consists of inorganic and organic toxic pollutants that pose a threat to environmental sustainability. The organic pollutants are a menace to the environment and life forms than the inorganic substances and pose teratogenic, mutagenic, carcinogenic, and other serious detrimental effects on the living entities, moreover, they have a gene-altering effect on aquatic life forms and affect the soil fertility and quality. Removal of varying effluents having recalcitrant contaminants with conventional treatment technologies is strenuous. In contrast to physical and chemical methods, biological treatment methods are environmentally friendly, versatile, efficient, and technically feasible with low operational costs and energy footprints. Biological treatment is a secondary wastewater treatment system that utilizes the metabolic activities of microorganisms to oxidize or reduce inorganic and organic compounds and transform them into dense biomass, which later can be removed by the sedimentation process. Biological treatment in bioreactors is an ex situ method of bioremediation and provides the benefits of continuous monitoring under controlled parameters. This paper attempts to provide a review of bioremediation technologies discussing most concerning widespread bioreactors and advances used for different industrial effluents with their comparative merits and limitations.