Potentially toxic elements in urban soils: source apportionment and contamination assessment

Heavy metal concentrations in soil and ecological risk assessment in the vicinity of Tianzhu Industrial Park, Qinghai-Tibet Plateau

Industrial parks in China are centers of intensive chemical manufacturing and other industrial activities, often concentrated in relatively small areas. This concentration increases the risk of soil pollution both within the parks and in surrounding areas. The soils of the Tibetan Plateau, known for their high sensitivity to environmental changes, are particularly vulnerable to human activity. In this study, we examined the concentrations (mg/kg) of 10 metal elements (As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Se, and Zn) in soils at depths of 0-10 cm, 10-20 cm, and 20-30 cm from the surface at three distances (500 m, 1000 m, and 1500 m from the park boundary) on the east, south, west, and north sides of the Tianzhu Industrial Park on the Qinghai-Tibet Plateau. The concentrations of As, Cr, Mn, and Pb were close to the standard reference values for the Qinghai-Tibet Plateau, while Cu, Ni, Se, and Zn levels were found to be 1.6-2.2 times higher than the reference values. Cd and Hg concentrations were particularly concerning, at 8.0 and 6.5 times higher than reference values, respectively. The potential ecological risk indexes indicated persistent risk levels for Cd and Se across various directions and distances. Variations in soil depth and direction were observed for the concentrations of As, Cd, Hg, Pb, Se, and Zn, underscoring the need for regular or long-term monitoring. Cd, in particular, presents a significant hazard due to its high concentration and its propensity for uptake by plants in the study area.

Spatial and Bioaccumulation of Heavy Metals in a Sheep-Based Food System: Implications for Human Health

Heavy metal contamination in agricultural soils presents serious environmental and health risks. This study assessed the bioaccumulation and spatial distribution of nickel, cadmium, zinc, lead, and copper within a sheep-based food chain in the Baia Mare region, Romania, which includes soil, green grass, sheep serum, and dairy products. Using inductively coupled plasma mass spectrometry (ICP-MS), we analyzed the concentrations of these metals and calculated bioconcentration factors (BCFs) to evaluate their transfer through trophic levels. Spatial analysis revealed that copper (up to 2528.20 mg/kg) and zinc (up to 1821.40 mg/kg) exceeded permissible limits, particularly near former mining sites. Elevated lead (807.59 mg/kg) and cadmium (2.94 mg/kg) were observed in industrial areas, while nickel and cobalt showed lower concentrations, but with localized peaks. Zinc was the most abundant metal in grass, while cadmium transferred efficiently to milk and cheese, raising potential health concerns. The results underscore the complex interplay between soil properties, contamination sources, and biological processes in heavy metal accumulation. These findings highlight the importance of continuous monitoring, risk assessment, and mitigation strategies to protect public health from potential exposure through contaminated dairy products.

Silicon-based nanoparticles for mitigating the effect of potentially toxic elements and plant stress in agroecosystems: A sustainable pathway towards food security

Due to their size, flexibility, biocompatibility, large surface area, and variable functionality nanoparticles have enormous industrial, agricultural, pharmaceutical and biotechnological applications. This has led to their widespread use in various fields. The advancement of knowledge in this field of research has altered our way of life from medicine to agriculture. One of the rungs of this revolution, which has somewhat reduced the harmful consequences, is nanotechnology. A helpful ingredient for plants, silicon (Si), is well-known for its preventive properties under adverse environmental conditions. Several studies have shown how biogenic silica helps plants recover from biotic and abiotic stressors. The majority of research have demonstrated the benefits of silicon-based nanoparticles (Si-NPs) for plant growth and development, particularly under stressful environments. In order to minimize the release of brine, heavy metals, and radioactive chemicals into water, remove metals, non-metals, and radioactive components, and purify water, silica has also been used in environmental remediation. Potentially toxic elements (PTEs) have become a huge threat to food security through their negative impact on agroecosystem. Si-NPs have the potentials to remove PTEs from agroecosystem and promote food security via the promotion of plant growth and development. In this review, we have outlined the various sources and ecotoxicological consequences of PTEs in agroecosystems. The potentials of Si-NPs in mitigating PTEs were extensively discussed and other applications of Si-NPs in agriculture to foster food security were also highlighted.

Evaluation of Toxicity and Genotoxicity of Concrete Cast with Steel Slags Using Higher Terrestrial Plants

The potential impact of concrete mixtures containing steel slag (SS) as a partial replacement of natural aggregates (NA) on the terrestrial ecosystem was assessed using a battery of plant-based bioassays. Leaching tests were conducted on four concrete mixtures and one mixture containing only NA (reference concrete). Leachates were tested for phytotoxicity using seeds of Lepidium sativum, Cucumis sativus, and Allium cepa. Emerging seedlings of L. sativum and A. cepa were used to assess DNA damage (comet test). The genotoxicity of the leachates was also analyzed with bulbs of A. cepa using the comet and chromosome aberration tests. None of the samples caused phytotoxic effects. On the contrary, almost all the samples supported the seedlings; and two leachates, one from the SS-containing concrete and the other from the reference concrete, promoted the growth of C. sativus and A. cepa. The DNA damage of L. sativum and A. cepa seedlings was significantly increased only by the reference concrete sample. In contrast, the DNA damage in A. cepa bulbs was significantly enhanced by the reference concrete but also by that of a concrete sample with SS. Furthermore, all leachates caused an increase in chromosomal aberrations in A. cepa bulbs. Despite some genotoxic effects of the concrete on plant cells, the partial replacement of SS does not seem to make the concrete more hazardous than the reference concrete, suggesting the potential use of SS as a reliable recycled material. Environ Toxicol Chem 2023;42:2193-2200. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Comparative review of ambient air PM2.5 source apportioning studies in Tehran

Rapid urbanization and consuming lifestyles have intensified air pollution in urban areas. Air pollution in megacities has imposed severe environmental damages to human health. Proper management of the issue necessitates identification of the share of emission sources. Therefore, numerous research works have studied the apportionment of the total emissions and observed concentrations among different emissions sources. In this research, a comprehensive review is conducted to compare the source apportioning results for ambient air PM2.5 in the megacity of Tehran, the capital of Iran. One hundred seventy-seven pieces of scientific literatures, published between 2005 and 2021, were reviewed. The reviewed research are categorized according to the source apportioning methods: emission inventory (EI), source apportionment (SA), and sensitivity analysis of the concentration to the emission sources (SNA). The possible reasons for inconsistency among the results are discussed according to the scope of the studies and the implemented methods. Although 85% of the reviewed original estimates identify that mobile sources contribute to more thant 60% of Tehran air pollution, the distribution of vehicle types and modes are clearly inconsistent among the EI studies. Our review suggests that consistent results in the SA studies in different locations in central Tehran may indicate the reliability of this method for the identification of the type and share of the emission sources. In contrast, differences among the geographical and sectoral coverage of the EI studies and the disparities among the emission factors and activity data have caused significant deviations among the reviewed EI studies. Also, it is shown that the results of the SNA studies are highly dependent on the categorization type, model capabilities and EI presumptions and data input to the pollutant dispersion modelings. As a result, integrated source apportioning in which the three methods complement each other's results is necessary for consistent air pollution management in megacities.

Supplementary information

The online version contains supplementary material available at 10.1007/s40201-023-00855-0.

Beyond Cleansing: Ecosystem Services Related to Phytoremediation

Phytotechnologies used for cleaning up urban and suburban polluted soils (i.e., brownfields) have shown some weakness in the excessive extent of the timeframe required for them to be effectively operating. This bottleneck is due to technical constraints, mainly related to both the nature of the pollutant itself (e.g., low bio-availability, high recalcitrance, etc.) and the plant (e.g., low pollution tolerance, low pollutant uptake rates, etc.). Despite the great efforts made in the last few decades to overcome these limitations, the technology is in many cases barely competitive compared with conventional remediation techniques. Here, we propose a new outlook on phytoremediation, where the main goal of decontaminating should be re-evaluated, considering additional ecosystem services (ESs) related to the establishment of a new vegetation cover on the site. The aim of this review is to raise awareness and stress the knowledge gap on the importance of ES associated with this technique, which can make phytoremediation a valuable tool to boost an actual green transition process in planning urban green spaces, thereby offering improved resilience to global climate change and a higher quality of life in cities. This review highlights that the reclamation of urban brownfields through phytoremediation may provide several regulating (i.e., urban hydrology, heat mitigation, noise reduction, biodiversity, and CO₂ sequestration), provisional (i.e., bioenergy and added-value chemicals), and cultural (i.e., aesthetic, social cohesion, and health) ESs. Although future research should specifically be addressed to better support these findings, acknowledging ES is crucial for an exhaustive evaluation of phytoremediation as a sustainable and resilient technology.

Recent advances in biochar amendments for immobilization of heavy metals in an agricultural ecosystem: A systematic review

Over the last several decades, extensive and inefficient use of contemporary technologies has resulted in substantial environmental pollution, predominantly caused by potentially hazardous elements (PTEs), like heavy metals that severely harm living species. To combat the presence of heavy metals (HMs) in the agrarian system, biochar becomes an attractive approach for stabilizing and limiting availability of HMs in soils due to its high surface area, porosity, pH, aromatic structure as well as several functional groups, which mostly rely on the feedstock and pyrolysis temperature. Additionally, agricultural waste-derived biochar is an effective management option to ensure carbon neutrality and circular economy while also addressing social and environmental concerns. Given these diverse parameters, the present systematic evaluation seeks to (i) ascertain the effectiveness of heavy metal immobilization by agro waste-derived biochar; (ii) examine the presence of biochar on soil physico-chemical, and thermal properties, along with microbial diversity; (iii) explore the underlying mechanisms responsible for the reduction in heavy metal concentration; and (iv) possibility of biochar implications to advance circular economy approach. The collection of more than 200 papers catalogues the immobilization efficiency of biochar in agricultural soil and its impacts on soil from multi-angle perspectives. The data gathered suggests that pristine biochar effectively reduced cationic heavy metals (Pb, Cd, Cu, Ni) and Cr mobilization and uptake by plants, whereas modified biochar effectively reduced As in soil and plant systems. However, the exact mechanism underlying is a complex biochar-soil interaction. In addition to successfully immobilizing heavy metals in the soil, the application of biochar improved soil fertility and increased agricultural productivity. However, the lack of knowledge on unfavorable impacts on the agricultural systems, along with discrepancies between the use of biochar and experimental conditions, impeded a thorough understanding on a deeper level.

Phytoextraction of Cu, Cd, Zn and As in four shrubs and trees growing on soil contaminated with mining waste

Mining activity has degraded large extensions of soil and its waste is composed of metals, anthropogenic chemicals, and sterile rocks. The use of native species in the recovery of polluted soils improves the conditions for the emergence of other species, tending to a process of ecosystem restoration. The objective of this study was to evaluate the bioaccumulation of metal(loid)s in four species of native plants and the effect of their distribution and bioavailability in soil with waste from an abandoned gold mine. Soil samples were taken from two sites in La Planta, San Juan, Argentina: Site 1 and Site 2 (mining waste and reference soil, respectively). In Site 1, vegetative organ samples were taken from Larrea cuneifolia, Bulnesia retama, Plectrocarpa tetracantha, and Prosopis flexuosa. The concentration of metal(loid)s in soil from Site 1 were Zn > As > Cu > Cd, reaching values of 7123, 6516, 240 and 76 mg kg^-1, respectively. The contamination indices were among the highest categories of contamination for all four metal(loid)s. The spatial interpolation analysis showed the effect of the vegetation as the lowest concentration of metal(loid)s were found in rhizospheric soil. The maximum concentrations of As, Cu, Cd and Zn found in vegetative organs were 371, 461, 28, and 1331 mg kg^-1, respectively. L. cuneifolia and B. retama presented high concentrations of Cu and Zn. The most concentrated metal(loid)s in P. tetracantha and P. flexuosa were Zn, As and Cu. Cd was the least concentrated metal in all four species. The values of BAF and TF were greater than one for all four species. In conclusion, the different phytoextraction capacities and the adaptations to arid environments of these four species are an advantage for future phytoremediation strategies. Their application contributes to the ecological restoration and risk reduction, allowing the recovery of ecosystem services.

Mobilization of contaminants: Potential for soil remediation and unintended consequences

Land treatment has become an essential waste management practice. Therefore, soil becomes a major source of contaminants including organic chemicals and potentially toxic elements (PTEs) which enter the food chain, primarily through leaching to potable water sources, plant uptake, and animal transfer. A range of soil amendments are used to manage the mobility of contaminants and subsequently their bioavailability. Various soil amendments, like desorbing agents, surfactants, and chelating agents, have been applied to increase contaminant mobility and bioavailability. These mobilizing agents are applied to increase the contaminant removal though phytoremediation, bioremediation, and soil washing. However, possible leaching of the mobilized pollutants during soil washing is a major limitation, particularly when there is no active plant uptake. This leads to groundwater contamination and toxicity to plants and soil biota. In this context, the present review provides an overview on various soil amendments used to enhance the bioavailability and mobility of organic and inorganic contaminants, thereby facilitating increased risk when soil is remediated in polluted areas. The unintended consequences of the mobilization methods, when used to remediate polluted sites, are discussed in relation to the leaching of mobilized contaminants when active plant growth is absent. The toxicity of targeted and non-targeted contaminants to microbial communities and higher plants is also discussed. Finally, this review work summarizes the existing research gaps in various contaminant mobilization approaches, and prospects for future research.

Nickel uptake in hydroponics and elemental profile in relation to cultivation reveal variability in three Hypericum species

The Hypericum species (H. perforatum, H. olympicum, and H. orientale) were cultured in hydroponics with excess nickel (Ni, 1 or 100 μM Ni) to compare the metallic and metabolite content. Identical species were collected outdoor to assess the same parameters (including uranium and lanthanides) with total of 53 elements. The results showed that Ni was less accumulated in shoots in hydroponics (translocation factor of 0.01-0.25) and the highest absolute amount was detected in H. olympicum. Essential elements were typically depleted by Ni excess, but Co and Na increased. Soluble phenols, sum of flavonols and catechin rather increased in response to Ni but quercetin glycosides and free amino acids decreased in the shoots of H. olympicum mainly. Comparison of laboratory and outdoor growing plants showed more phenols in outdoor samples but not in H. olympicum and individual metabolites differed too. Plants cultured in hydroponics contained lower amount of non-essential, toxic and rare earth elements (30-100-fold) and shoot bioaccumulation factor in outdoor samples was low for most elements (<0.01) but not for Cd and Pt. Data reveal that H. olympicum is a potent source of phenolic metabolites whereas H. orientale accumulates many elements (38 out of 53 elements).

Characteristics and Health Risk Assessment of Mercury Exposure via Indoor and Outdoor Household Dust in Three Iranian Cities

This study aims to increase our current knowledge on the concentration of particulate-bound mercury (PBM) in urban environments of three Iranian cities, where high concentrations of dust particles can act as carriers for mercury transport and deposition. A total of 172 dust samples were collected from Ahvaz, Asaluyeh, and Zabol residential houses and in outdoor air and were analyzed for total mercury content. Ahvaz is a highly industrialized city with large metallurgical plants, refineries, and major oil-related activities, which were assumed to contribute to elevated contents of PBM in this city. Very high levels of Hg contamination in Ahvaz indoor dust samples were calculated (Contamination Factor: CF > 6). Sampling sites in Asaluyeh are influenced by Hg emissions from the South Pars Gas Field. However, the results revealed a relatively lower concentration of PBM in Asaluyeh, with a low-to-moderate level of Hg contamination. This is likely ascribed to the lower content of total mercury in hydrocarbon gases than crude oil, in addition to the absence of metal smelting plants in this city compared to Ahvaz. Zabol, as a city devoid of industrial activity, presented the lowest levels of PBM concentration and contamination. Indoor dust in Ahvaz showed considerable potential to cause a non-carcinogenic health risk for children, mainly through the inhalation of PBM, while the health risk for other cities was below safe limits. The trend of health risk was found in the order of indoor > outdoor and children > adults in all studied cities.

Assessing the contamination level, sources and risk of potentially toxic elements in urban soil and dust of Iranian cities using secondary data of published literature

Research in urban geochemistry has been expanding globally in recent years, following the trend of the ever-increasing human population living in cities. Environmental problems caused by non-degradable pollutants such as metals and metalloids are of particular interest considering the potential to affect the health of current and future urban residents. In comparison with the extensive global research on urban geochemistry, Iranian cities have not received sufficient study. However, rapid and often uncontrolled urban expansion in Iran over recent years has contributed to an increasing number of studies concerning contamination of urban soil and dust. The present work is based on a comprehensive nationwide evaluation and intercomparison of published quantitative datasets to determine the contamination levels of Iranian cities with respect to potentially toxic elements (PTEs) and assess health risks for urban population. Calculation of geoaccumulation, pollution, and integrated pollution indices facilitated the identification of the elements of most concern in the cities, while both carcinogenic and non-carcinogenic risks have been assessed using a widely accepted health-risk model. The analysis of secondary, literature data revealed a trend of contamination, particularly in old and industrial cities with some alarming levels of health risks. Among the elements of concern, As, Cd, Cu, and Pb were found to be most enriched in soils and dusts of the studied cities based on the calculated geochemical indices. The necessity of designing strategic plans to mitigate possible adverse effects of elevated PTE concentrations in urban environments is emphasized considering the role of long-term exposure in the occurrence of chronic carcinogenic and non-carcinogenic health problems.

Heavy Metals in Soil and Sand from Playgrounds of Çanakkale City (Turkey), and Related Health Risks for Children

Children spend most of their time in playgrounds and, in parallel, constitute the social group most sensitive to contaminants. Here, we present the results of a comparative study of heavy-metal contents between soils and sand from sandboxes obtained from playgrounds of Çanakkale city. Average contents of soils followed the order of iron (Fe) (12,901 mg kg−1) > manganese (Mn) (475 mg kg−1) > zinc (Zn) (58 mg kg−1) > copper (Cu) (28 mg kg−1) > nickel (Ni), chromium (Cr) (21 mg kg−1) > lead (Pb) (18 mg kg−1). Sand had lower contents, however, due to the reduction of particles size through prolonged use, and accumulation of Fe/Mn (oxyhydr)oxides on sand grains tended to diminish the differences between soils and sand. Through chemometric analysis, Cr and Ni were found to have a lithogenic origin, while the rest of metals were related to anthropogenic activities. Spatially, heavy-metal contents followed the pattern of the city’s sprawl. Risk estimates on children’s health showed that ingestion was the most important exposure route, followed by dermal contact and inhalation. Exposure of children to sand was of similar importance to that of soils. These findings are significant, as the contamination of sand has not yet received much attention compared to the soil of playgrounds.

Heavy Metal Levels in Milk and Cheese Produced in the Kvemo Kartli Region, Georgia

Milk and dairy products are among the most important food sectors in Georgia, and milk is considered one of the most essential foods in the human diet according to Georgian food culture. Kvemo Kartli is one of the major regions in Georgia for milk production. This region suffers from heavy metal contamination in soil and water because of the mining industry. This study was conducted to determine the concentrations of cadmium, lead, iron, zinc, copper, chromium, manganese, cobalt, nickel, selenium and molybdenum in milk and cheese and to evaluate whether the concentrations of these elements correspond to the permissible levels of toxic elements in milk and cheese for Georgia and the EU. In total, 195 milk samples and 25 cheese samples (16 from Imeruli cheese and nine from Sulguni cheese) were collected from nine different villages in the Kvemo Kartli region in Georgia: Chapala, Vanati, Bolnisi, Mtskneti, Sabereti, Ratevani, Khidiskuri, Kazreti, Kvemo Bolnisi. The determination of heavy metal in all samples was carried out by inductively coupled plasma-mass spectrometry. The research results show that the concentration of these elements in most milk samples is fairly constant for all villages and is less than the permissible levels, except for seven samples from the following villages: Kvemo Bolnisi, Bolnisi, Mitskineti and Ratawani, where the concentration of lead in the milk samples was higher than the permissible limits mentioned in the literature, ranging from 0.027 to 1003 mg L⁻¹. As for copper, its concentration in milk in Sabereti and Vanati villages was above the permissible limits according to the EU limit, ranging from 0.42 to 1.28 mg L⁻¹. For cheese samples, the concentration of cadmium, lead, copper, Co and Ni in the two types of cheese was less than the permissible limit according to the laws of Georgia. Finally, the heavy metal concentrations in Imeruli and Sulguni cheese for manganese (Mn), chromium (Cr), selenium (Se), molybdenum (Mo) zinc (Zn) and iron (Fe) were above the permissible limit. Thus, the study results showed that the consumption of milk does not pose a direct and serious threat to the health of consumers. As for the two types of cheese, future studies and continuous monitoring are necessary to assess the cheese content of trace elements and the risk of its consumption to the consumer.

A meta-analysis of heavy metals pollution in farmland and urban soils in China over the past 20 years

A total of 713 research papers about field monitor experiments of heavy metals in farmland and urban soils in China, published from 2000 to 2019, were obtained. A meta-analysis was conducted to evaluate the level of China's heavy metal pollution in soils, mainly focusing on eight heavy metals. It was found that the average concentrations of cadmium (Cd), lead (Pb), zinc (Zn), copper (Cu), mercury (Hg), chromium (Cr), nickel (Ni), and arsenic (As) in China were 0.19, 30.74, 85.86, 25.81, 0.074, 67.37, 27.77 and 8.89 mg/kg, respectively. Compared with the background value (0.097 mg/kg), the Cd content showed a twofold (0.19 mg/kg) rise in farmland soils and a threefold (0.29 mg/kg) rise in urban soils. The decreasing order of the mean I_geo was Cd (1.77) > Pb (0.62) > Zn (0.60) > Cu (0.58) > Hg (0.57) > Cr (0.54) > Ni (0.47) > As (0.28). Nearly 33.54% and 44.65% of sites in farmland and urban soils were polluted with Cd. The average concentrations of eight heavy metals were not sensitive change in recent two decades in farmland and urban soils. The average P_n values for urban (2.52) and farmland (2.15) soils showed that heavy metal pollution in urban soils was more serious than that in farmland, and the middle Yangtze River regions, where industrial activity dominates, were the most polluted. The meta-analysis comprehensively evaluated the current pollution situation of soil heavy metal, and provided important basis for soil management and environment prevention in China.

Trace elements in two particle size fractions of urban soils collected from playgrounds in Bratislava (Slovakia)

Today, it is proven that the contaminated urban soils are hazardous for the human health. Soil substrates of playgrounds call for special research as they are places where children are directly exposed to soil contaminants. Therefore, the objective of this work was to measure the pseudo-total contents and bioaccessibility of several metals and metalloids (As, Bi, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, Sn, V, Zn) in two grain sizes (< 150 μm and < 50 μm) of playground soils in Bratislava city (the capital of Slovakia). The content of metal(loid)s in the soils was controlled by a number of factors, with their increased contents (above 75% percentile or higher) at sites influenced by point sources of pollution (industry and agriculture) or at old sites located in the city centre. Cobalt, Cr, Fe, Mn, Ni and V had relatively uniform contents in soils compared to the other elements. As regression modelling with a categorical variable confirmed, the age of urban areas influenced the accumulation of As, Bi, Cd, Cu, Hg, Pb, Sb and Sn in playground soils. Exploratory statistical techniques with compositionally transformed data (principal component analysis, cluster analysis and construction of symmetric coordinates for correlation analysis) divided trace elements into the two main groupings, Co, Cr, Fe, Mn, Ni, V and Bi, Cd, Cu, Hg, Pb, Sb, Sn, Zn. Median concentrations of the elements in smaller soil grains (< 50 μm) were significantly higher than in coarser grains (< 150 μm). Cobalt, Cu, Mn, Pb, Sn and Zn had significantly higher bioaccessible proportions (% of the pseudo-total content) in < 50 μm soil size than in < 150 μm; however, the same order of bioaccessibility was achieved in both grain sizes. The highest bioaccessibility had Cd, Cu, Pb and Zn (~ 40% and more), followed by Co, As, Mn, Sb (18-27%), Hg, Ni, Sn (10-12%) and finally Cr, Fe and V (less than 4%). The hazard index and carcinogenic risk values were higher in < 50 μm than in < 150 μm and significantly decreased in the two soil sizes when the bioaccessibility results were included in the health hazard calculation.

Spatial and vertical distribution analysis of heavy metals in urban retention tanks sediments: a case study of Strzyza Stream

Concentrations of seven heavy metals (HMs): Zn, Cu, Pb, Cd, Ni, Cr, and Fe in core samples of bottom sediments from four retention tanks (RTs) located along the Strzyza Stream in northern Poland (Gdansk) were measured to obtain a general view of sediment quality. The recognition of contamination and potential environmental impacts is the main aim of this paper. A total of 96 sediment samples were collected from eight sampling sites at depths of 0-2 cm, 8-10 cm, 16-18 cm, 24-26 cm. Concentrations of Cu, Zn, Pb, Fe, Ni, and Cr were measured with AAS while Cd concentration was measured with ICP-MS. Granulometric analyses with normalized sieve apertures were carried out. Geochemical indices: enrichment factor, anthropogenic factor, and modified degree of contamination (mCd) were used to assess the contamination level. Concentrations of HMs in sediments changed in the range: Cu (3.24-119 mg/kg d.w.), Zn (12.5-584 mg/kg d.w.), Pb (4.91-309 mg/kg d.w.), Cd (0.003-0.716 mg/kg d.w.), Ni (1.57-25.8 mg/kg d.w.), Cr (2.45-74.5 mg/kg d.w.), and Fe (3993-63817 mg/kg d.w.). The sequential extraction verified the bonding of HMs with non-mobile fractions. Geochemical indices showed widespread pollution by Cu, Pb, Cd, and Zn. Cluster and factor analysis distinguished three related subgroups of HMs: Pb, Ni-Cr, and Fe-Cd-Cu-Zn, suggesting possible common source of each subgroup. Strongly contaminated sediments were distinguished in sediment cores in two middle stream RTs characterized by intense urbanization in their direct catchments.

Sources, bioaccumulation, health risks and remediation of potentially toxic metal(loid)s (As, Cd, Cr, Pb and Hg): an epitomised review

The release of potentially toxic metal(loid)s (PTMs) such as As, Cd, Cr, Pb and Hg has become a serious threat to the environment. The anthropogenic contribution of these PTMs, especially Hg, is increasing continuously, and coal combustion in thermal power plants (TPPs) is considered to be the highest contributor of PTMs. Once entered into the environment, PTMs get deposited on the soil, which is the most important sink of these PTMs. This review centred on the sources of PTMs from coal and flyash and their enrichment in soil, chemical behaviour in soil and plant, bioaccumulation in trees and vegetables, health risk and remediation. Several remediation techniques (physical and chemical) have been used to minimise the PTMs level in soil and water, but the phytoremediation technique is the most commonly used technique for the effective removal of PTMs from contaminated soil and water. Several plant species like Brassica juncea, Pteris vittata and Helianthus annuus are proved to be the most potential candidate for the PTMs removal. Among all the PTMs, the occurrence of Hg in coal is a global concern due to the significant release of Hg into the atmosphere from coal-fired thermal power plants. Therefore, the Hg removal from pre-combustion (coal washing and demercuration techniques) coal is very essential to reduce the possibility of Hg release to the atmosphere.

Heavy metals pollution assessment and its associated human health risk evaluation of urban soils from Indian cities: a review

Urban soils of 32 Indian cities were collected from literature-based data for the period of 2001-2019 to measure the contamination levels of six heavy metals including arsenic (As), chromium (Cr), copper (Cu), zinc (Zn), nickel (Ni), and lead (Pb) and also evaluated the potential human health risk for adults and children. The results indicated that concentrations of six heavy metals in the urban soils were much higher than both geochemical background values (Grade-I) and also Canadian soil quality guideline values (Grade-II) in most of the cities in India. Higher concentration of Cr and Ni was in cities mainly located in southern (Karnataka), northern (Uttar Pradesh), and eastern (Odisha); As and Pb primarily in central (Telangana), while Zn and Cu largely in western (Maharashtra) and eastern (Jharkhand) states of India, respectively. The index of geo-accumulation (I_geo) values varied largely and showed moderately polluted to extremely polluted levels, possibly caused/influenced by anthropogenic activity in the urban regions in India. The non-carcinogenic health risk due to Cu, Zn, Ni, and Pb in most urban regions was lower than the threshold value (HI < 1), indicating no non-carcinogenic health risk for adults and children. As and Cr on children, non-carcinogenic risk was very higher than that of adults, and their risk values were also exceeded the threshold value, indicating that As and Cr in the urban soils posed considerable non-carcinogenic health risks on urban residents. The total carcinogenic/cancer risk due to Pb in most urban regions was lower than the recommended limit of 1.00E-04, while Cr and As have shown potential cancer risk for both adults and children. Therefore, As and Cr are the sole heavy metals that cause potential health risk in an urban region residents in India, which needs to be paid more attention and also controlling measures should be initiated.

Levels, spatial distribution, risk assessment, and sources of environmental contamination vectored by road dust in Cienfuegos (Cuba) revealed by chemical and C and N stable isotope compositions

Road dust is an indicator widely used when monitoring contamination and evaluating environmental and health risks in urban ecosystems. We conducted an exhaustive characterization of road dust samples coupling their chemical characteristics and stable isotope compositions (C and N) with the aim of evaluating the levels and spatial distribution of local contamination as well as to identify its main source(s) in the coastal city of Cienfuegos (Cuba). Results indicate that the concentrations of several elements (total nitrogen, S, Ca, V, Cu, Zn, Mo, Sn, Hg, and Pb) exceed the background values reported for both Cuban soils and the upper continental crust (UCC) and showed a high variability among the sampling sites. We show that road dust contamination in Cienfuegos induces high associated ecological risks. Among the studied elements, Cd and Hg are the major contributors to the environmental contamination in the city, mainly along busy roads and downtown. δ¹³C and δ¹⁵N, coupled to a multivariate statistical analysis, help associate the studied elements to several local sources of contamination: mineral matter derived from local soils, cement plant and related activities, road pavement alteration, power plant, road traffic, and resuspension of particulate organic matter (POM). Our results suggest that incorporating the chemical and isotope monitoring of road dust may help implement more effective environmental management measures in order to reduce their adverse impact on ecosystems and human health.

Heavy metals contamination in urban surface soils of Medak province, India, and its risk assessment and spatial distribution

The main purpose of the current study is to assess the contamination status, human health risk, and spatial distribution of heavy metals in the urban soils from the Medak province in India. For this purposes, a total of 40 urban surface soil samples were collected and analyzed seven heavy metals including chromium (Cr), copper (Cu), cadmium (Cd), arsenic (As), nickel (Ni), lead (Pb), and zinc (Zn). The results of the study showed that the concentration of Cr (81-751 mg/kg), Cu (2-180 mg/kg), Zn (25-108 mg/kg), Pb (5-77 mg/kg), Ni (1-50 mg/kg), As (0.4-14 mg/kg), and Cd (0.1-4.2 mg/kg), respectively, was found above their natural background values. The geo-accumulation index analysis indicated that except Zn, all other tested heavy metals had a range of moderately to heavily polluted/contaminated in the study region. Spatial distribution pattern analysis inferred that the soil heavy metal (Cu, Cr, Zn, and Ni) pollutions in western regions of Medak were relatively larger than that in central and eastern regions. The hazard index (HI) values for Cu, Cd, Zn, As, Pb, and Ni were below 1, implying that there is no non-carcinogenic risks exposure from these heavy metals in soil for children and adults in the study region. However, HI value for Cr ranged from 3.08E-01 to 2.86E+00 for children, implying that children were relatively vulnerable population than adults in the current study region. Comparatively speaking, 67.5% and 100% total carcinogenic risks for Cr values for adults and children were larger than the acceptable threshold value of 1.0E-04, indicating chromium poses the greatest carcinogenic risk in the study region.

Pollution assessment of potentially toxic elements in soils of different taxonomy orders in central Greece

Four hundred fifty soil samples of the orders of Alfisols, Inceptisols, Endisols, and Vertisols from Karditsa, Trikala, and Larissa (Central Greece) were collected over a three-year period. In these samples we analyzed potentially toxic elements (PTEs) and soil properties known to affect their mobility. High regression coefficients were observed between soil pH and PTE concentrations in Alfisols, reflecting that soil pH is the dominant characteristic influencing PTEs. In Inceptisols, there was a significant interaction among the studied PTEs, probably due to PTEs having the same origin. The Endisol samples had high sand content and electrical conductivity values, resulting in high availability of all studied PTEs. In Vertisols, clay content proved to be the most important parameter influencing PTE levels. Factor analysis was also used in order to clarify the possible sources of metals in the studied areas.