Bioremediation of tannery effluent by Cr- and salt-tolerant bacterial strains

Simultaneous Removal of Ammonium and Cr(VI) by the Newly Isolated Marine Bacterium Sulfitobacter dubius PT04 in Tannery Wastewater

Biological ammonium nitrogen removal in tannery wastewater is significantly hindered by hexavalent chromium (Cr(VI)) and high salinity. In this study, Sulfitobacter dubius PT04, a newly isolated, salt-tolerant marine bacterium from deep-sea hydrothermal vent sediment in the South Atlantic Ocean, was characterized for its ability to simultaneously remove total ammonia nitrogen (TAN) and Cr(VI). This strain demonstrated effective removal across a pH range of 6-8, temperatures of 25-35 °C, and salinity levels of 0-6%.Optimal conditions identified using Response Surface Methodology (RSM) were pH 6.92, 27.69 °C, and 3.78% salinity. Most TAN was assimilated into biological nitrogen, effectively reducing inorganic nitrogen pollutants. Additionally, Cr(VI) removal was facilitated by enzymatic reactions with reduction activity predominantly in the cell membrane, followed by extracellular release of Cr(III) with minimal surface adsorption. After 7 days of treatment, strain PT04 achieved removal rates of 90.66% for TAN and 74.81% for Cr(VI), highlighting its bioremediation potential for TAN and Cr(VI) in tannery wastewater.

EFSA Panel on Biological Hazards (BIOHAZ), Koutsoumanis K, Allende A, Alvarez‐Ordóñez A, Bolton D, Bover‐Cid S, Chemaly M, De Cesare A, Hilbert F, Lindqvist R, Nauta M, Nonno R, Peixe L, Ru G, Simmons M, Skandamis P, Suffredini E, Cocconcelli PS, Fernández Escámez PS, Maradona MP, Querol A, Sijtsma L, Suarez JE, Sundh I, Botteon A, Fulvio B, Correia S, Herman L. Update of the list of qualified presumption of safety (QPS) recommended microbiological agents intentionally added to food or feed as notified to EFSA 20: Suitability of taxonomic units notified to EFSA until March 2024

The qualified presumption of safety (QPS) process was developed to provide a safety assessment approach for microorganisms intended for use in food or feed chains. In the period covered by this statement, no new information was found that would change the status of previously recommended QPS TUs. The TUs in the QPS list were updated based on a verification, against their respective authoritative databases, of the correctness of the names and completeness of synonyms. A new procedure has been established to ensure the TUs are kept up to date in relation to recent taxonomical insights. Of 83 microorganisms notified to EFSA between October 2023 and March 2024 (47 as feed additives, 25 as food enzymes or additives, 11 as novel foods), 75 were not evaluated because: 15 were filamentous fungi, 1 was Enterococcus faecium, 10 were Escherichia coli, 1 was a Streptomyces (all excluded from the QPS evaluation) and 48 were TUs that already have a QPS status. Two of the other eight notifications were already evaluated for a possible QPS status in the previous Panel Statement: Heyndrickxia faecalis (previously Weizmannia faecalis) and Serratia marcescens. One was notified at genus level so could not be assessed for QPS status. The other five notifications belonging to five TUs were assessed for possible QPS status. Akkermansia muciniphila and Actinomadura roseirufa were still not recommended for QPS status due to safety concerns. Rhizobium radiobacter can be recommended for QPS status with the qualification for production purposes. Microbacterium arborescens and Burkholderia stagnalis cannot be included in the QPS list due to a lack of body of knowledge for its use in the food and feed chain and for B. stagnalis also due to safety concerns. A. roseirufa and B. stagnalis have been excluded from further QPS assessment.

Tannery effluent treatments with mangrove fungi, grass root biomass, and biochar

Tannery effluents contain high amounts of polluting chemicals, such as salts and heavy metals released often to surface waters. New economic and eco-friendly purification methods are needed. Two adsorbing materials and five salt-tolerant fungal isolates from mangrove habitat were studied. Purification experiments were carried out using the pollutant adsorbents biochar and the biomass of vetiver grass (Chrysopogon zizanioides) roots and the fungi Cladosporium cladosporioides, Phomopsis glabrae, Aspergillus niger, Emericellopsis sp., and Scopulariopsis sp., which were isolated from mangrove sediment. They efficacy to reduce pollutants was studied in different combinations. Salinity, turbidity, total dissolved solids, total suspended solids, phenols, nitrogen, ammonia. Biological and chemical oxygen demand (BOD, COD) and several heavy metals were measured. The adsorbents were efficient reducing the pollutants to 15-50% of the original. The efficiency of the combination of biochar and roots was generally at the same level as the adsorbents alone. Some pollutants such as turbidity, COD and ammonium were reduced slightly more by the combination than the adsorbents alone. From all 14 treatments, Emericellopsis sp. with biochar and roots appeared to be the most efficient reducing pollutants to < 10-30%. BOD and COD were reduced to ca 5% of the original. The treatment was efficient in reducing also heavy metals (As, Cd, Cr, Mn Pb, Zn). The fungal species originating from the environment instead of the strains present in the tannery effluent reduced pollutants remarkably and the adsorbents improved the reduction efficiency. However, the method needs development for effluents with high pollutant concentrations to fulfil the environmental regulations.

Searching for Chemical Agents Suppressing Substrate Microbiota in White-Rot Fungi Large-Scale Cultivation

Edible fungi are a valuable resource in the search for sustainable solutions to environmental pollution. Their ability to degrade organic pollutants, extract heavy metals, and restore ecological balance has a huge potential for bioremediation. They are also sustainable food resources. Edible fungi (basidiomycetes or fungi from other divisions) represent an underutilized resource in the field of bioremediation. By maximizing their unique capabilities, it is possible to develop innovative approaches for addressing environmental contamination. The aim of the present study was to find selective chemical agents suppressing the growth of microfungi and bacteria, but not suppressing white-rot fungi, in order to perform large-scale cultivation of white-rot fungi in natural unsterile substrates and use it for different purposes. One application could be the preparation of a matrix composed of wooden sleeper (contaminated with PAHs) and soil for further hazardous waste bioremediation using white-rot fungi. In vitro microbiological methods were applied, such as, firstly, compatibility tests between bacteria and white-rot fungi or microfungi, allowing us to evaluate the interaction between different organisms, and secondly, the addition of chemicals on the surface of a Petri dish with a test strain of microorganisms of white-rot fungi, allowing us to determine the impact of chemicals on the growth of organisms. This study shows that white-rot fungi are not compatible to grow with several rhizobacteria or bacteria isolated from soil and bioremediated waste. Therefore, the impact of several inorganic materials, such as lime (hydrated form), charcoal, dolomite powder, ash, gypsum, phosphogypsum, hydrogen peroxide, potassium permanganate, and sodium hydroxide, was evaluated on the growth of microfungi (sixteen strains), white-rot fungi (three strains), and bacteria (nine strains) in vitro. Charcoal, dolomite powder, gypsum, and phosphogypsum did not suppress the growth either of microfungi or of bacteria in the tested substrate, and even acted as promoters of their growth. The effects of the other agents tested were strain dependent. Potassium permanganate could be used for bacteria and Candida spp. growth suppression, but not for other microfungi. Lime showed promising results by suppressing the growth of microfungi and bacteria, but it also suppressed the growth of white-rot fungi. Hydrogen peroxide showed strong suppression of microfungi, and even had a bactericidal effect on some bacteria, but did not have an impact on white-rot fungi. The study highlights the practical utility of using hydrogen peroxide up to 3% as an effective biota-suppressing chemical agent prior to inoculating white-rot fungi in the large-scale bioremediation of polluted substrates, or in the large-scale cultivation for mushroom production as a foodstuff.

Emerging trends in wastewater treatment: Addressing microorganic pollutants and environmental impacts

This review focuses on the challenges and advances associated with the treatment and management of microorganic pollutants, encompassing pesticides, industrial chemicals, and persistent organic pollutants (POPs) in the environment. The translocation of these contaminants across multiple media, particularly through atmospheric transport, emphasizes their pervasive nature and the subsequent ecological risks. The urgency to develop cost-effective remediation strategies for emerging organic contaminants is paramount. As such, wastewater-based epidemiology and the increasing concern over estrogenicity are explored. By incorporating conventional and innovative wastewater treatment techniques, this article highlights the integration of environmental management strategies, analytical methodologies, and the importance of renewable energy in waste treatment. The primary objective is to provide a comprehensive perspective on the current scenario, imminent threats, and future directions in mitigating the effects of these pollutants on the environment. Furthermore, the review underscores the need for international collaboration in developing standardized guidelines and policies for monitoring and controlling these microorganic pollutants. It advocates for increased investment in research and development of advanced materials and technologies that can efficiently remove or neutralize these contaminants, thereby safeguarding environmental health and promoting sustainable practice.

Comprehensive technological assessment for different treatment methods of leather tannery wastewater

The leather-making process necessitates large amounts of water and consequently generates tons of liquid waste as leather tannery wastewater (TWW) is disposed of directly in the open environment. Open disposal of untreated TWW into the natural environment causes an accumulation of various polluting compounds, including heavy metals, dyes, suspended solids inorganic matter, biocides, oils, tannins, and other toxic chemicals. It thus poses potential hazards to the environment and human health. This study primarily focuses on providing in-depth insight into the characteristics, treatment strategies, and regulatory frameworks for managing TWW in leather processing industries. Different technologies of conventional physico-chemical (equalization, coagulation, and adsorption), advanced approaches (Fenton oxidation, ozonation, cavitation), thermo-catalytic and biological treatments available to treat TWW, and their integrative approaches were also highlighted. This review also sheds light on the most frequently applied technologies to reduce contaminant load from TWW though there are several limitations associated with it such as being ineffective for large quantities of TWW, waste generation during treatment, and high operational and maintenance (O&M) costs. It is concluded that the sustainable alternatives applied in the current TWW technologies can minimize O&M costs and recirculate the treated water in the environment. The exhaustive observations and recommendations presented in this article are helpful in the industry to manage TWW and recirculate the water in a sustainable manner.

Halo-alkaliphilic microbes as an effective tool for heavy metal pollution abatement and resource recovery: challenges and future prospects

The current study presents an overview of heavy metals bioremediation from halo-alkaline conditions by using extremophilic microorganisms. Heavy metal remediation from the extreme environment with high pH and elevated salt concentration is a challenge as mesophilic microorganisms are unable to thrive under these polyextremophilic conditions. Thus, for effective bioremediation of extreme systems, specialized microbes (extremophiles) are projected as potential bioremediating agents, that not only thrive under such extreme conditions but are also capable of remediating heavy metals from these environments. The physiological versatility of extremophiles especially halophiles and alkaliphiles and their enzymes (extremozymes) could conveniently be harnessed to remediate and detoxify heavy metals from the high alkaline saline environment. Bibliometric analysis has shown that research in this direction has found pace in recent years and thus this review is a timely attempt to highlight the importance of halo-alkaliphiles for effective contaminant removal in extreme conditions. Also, this review systematically presents insights on adaptive measures utilized by extremophiles to cope with harsh environments and outlines the role of extremophilic microbes in industrial wastewater treatment and recovery of metals from waste with relevant examples. Further, the major challenges and way forward for the effective applicability of halo-alkaliphilic microbes in heavy metals bioremediation from extremophilic conditions are also highlighted.

A comprehensive review on chromium (Cr) contamination and Cr(VI)-resistant extremophiles in diverse extreme environments

Chromium (Cr) compounds are usually toxins and exist abundantly in two different forms, Cr(VI) and Cr(III), in nature. Their contamination in any environment is a major problem. Many extreme environments including cold climate, warm climate, acidic environment, basic/alkaline environment, hypersaline environment, radiation, drought, high pressure, and anaerobic conditions have accumulated elevated Cr contamination. These harsh physicochemical conditions associated with Cr(VI) contamination damage biological systems in various ways. However, several unique microorganisms belonging to phylogenetically distant taxa (bacteria, fungi, and microalgae) owing to different and very distinct physiological characteristics can withstand extremities of Cr(VI) in different physicochemical environments. These challenging situations offer great potential and extended proficiencies in extremophiles for environmental and biotechnological applications. On these issues, the present review draws attention to Cr(VI) contamination from diverse extreme environmental regions. The study gives a detailed account on the ecology and biogeography of Cr(VI)-resistant microorganisms in inhospitable environments, and their use for detoxifying Cr(VI) and other applications. The study also focuses on physiological, multi-omics, and genetic engineering approaches of Cr(VI)-resistant extremophiles.

Autochthonous strains of Trichoderma isolated from tannery solid waste improve phytoextraction potential of heavy metals by sunflower

This research work was aimed at isolating and demonstrating the significant potential of autochthonous fungi for phytoextraction of hazardous metals in metal polluted soil using Helianthus annuus. Four multi-metal resistant strains of Trichoderma were selected from a total of 21 strains isolated from tannery polluted soil and tannery solid waste. Autochthonous Trichoderma strains were used singly and in the form of consortium (TC). Sunflower was grown in pots for 90 days having eight different amendments of tannery polluted soil with and without Trichoderma inoculation. Growth and biochemical attributes of the plants were observed along with metal content extract by different plant parts. The results revealed that TC enhanced shoot length, shoot dry weight, and metal uptake as compared to single specie inoculation. Similarly, BCF (72.8-118.23%) and TF were significantly pronounced in shoots of H. annuus grown with TC at 40% amended soil. The biochemical analysis of the plants showed that Trichoderma strains boosted the enzymatic (catalase, peroxidase, and superoxide dismutase) antioxidants in the plants. The use of indigenous fungi with metal accumulating plants like sunflower can help to alleviate metal contamination from industrial sites and can make the soil cultivable for energy crops.

Advancements of sequencing batch reactor for industrial wastewater treatment: Major focus on modifications, critical operational parameters, and future perspectives

Industrial wastewater discharge has increased manifolds over the last few decades. Efficient industrial wastewater treatment is mandatory to meet stringent discharge regulations. Biological treatment systems, such as the sequencing batch reactor (SBR) are generally employed for domestic wastewater treatment. However, low infrastructure and energy requirements, as well as low footprint, make SBR a prominent technique to treat industrial wastewater. In the present review, the feasibility of SBR to treat wastewater generated from industries, such as textile, pulp and paper, pharmaceutical, tannery, etc., has been discussed. The factors affecting the treatment efficacy of the SBR in terms of organics and nutrient removal have also been investigated. It has been observed that the SBR system is effective for industrial wastewater treatment as it is easy to operate, resistant to shock loads, and can retain high biomass concentrations. The modifications to the conventional SBR, such as sludge granulation, the addition of bio-film carriers, and the incorporation of adsorbents, salt-tolerant microbes, and coagulants have been discussed. Further, various novel combinations of SBR with the other advanced treatment technologies, such as Fenton, membrane-based process, and electrochemical process have shown enhanced removal of various conventional and recalcitrant pollutants. The current review also accentuates the sustainability aspects of SBR technology to treat industrial wastewater which may be beneficial for researchers and engineers working in this field.

Constructed wetlands as a sustainable technology for wastewater treatment with emphasis on chromium-rich tannery wastewater

Water scarcity is a major threat to agriculture and humans due to over abstraction of groundwater, rapid urbanization and improper use in industrial processes. Industrial consumption of water is lower than the abstraction rate, which ultimately produces large amounts of wastewater such as from tannery industry containing high concentration of chromium (Cr). Chromium-contaminated tannery industry wastewater is used for irrigation of food crops, resulting in food safety and public health issues globally. In contrast to conventional treatment technologies, constructed wetlands (CWs) are considered as an eco-friendly technique to treat various types of wastewaters, although their application and potential have not been discussed and elaborated for Cr treatment of tannery wastewater. This review briefly describes Cr occurrence, distribution and speciation in aquatic ecosystems. The significance of wetland plant species, microorganisms, various bedding media and adsorbents have been discussed with a particular emphasis on the removal and detoxification of Cr in CWs. Also, the efficiency of various types of CWs is elaborated for advancing our understanding on Cr removal efficiency and Cr partitioning in various compartments of the CWs. The review covers important aspects to use CWs for treatment of Cr-rich tannery wastewater that are key to meet UN's Sustainable Development Goals.

Effect of Salinity on Cr(VI) Bioremediation by Algal-Bacterial Aerobic Granular Sludge Treating Synthetic Wastewater

Heavy metal-containing wastewater with high salinity challenges wastewater treatment plants (WWTPs) where the conventional activated sludge process is widely applied. Bioremediation has been proven to be an effective, economical, and eco-friendly technique to remove heavy metals from various wastewaters. The newly developed algal-bacterial aerobic granular sludge (AGS) has emerged as a promising biosorbent for treating wastewater containing heavy metals, especially Cr(VI). In this study, two identical cylindrical sequencing batch reactors (SBRs), i.e., R1 (Control) and R2 (with 1% additional salinity), were used to cultivate algal-bacterial AGS and then to evaluate the effect of salinity on the performance of the two SBRs. The results reflected that less filamentation and a rougher surface could be observed on algal-bacterial AGS when exposed to 1% salinity, which showed little influence on organics removal. However, the removals of total inorganic nitrogen (TIN) and total phosphorus (TP) were noticeably impacted at the 1% salinity condition, and were further decreased with the co-existence of 2 mg/L Cr(VI). The Cr(VI) removal efficiency, on the other hand, was 31–51% by R1 and 28–48% by R2, respectively, indicating that salinity exposure may slightly influence Cr(VI) bioremediation. In addition, salinity exposure stimulated more polysaccharides excretion from algal-bacterial AGS while Cr(VI) exposure promoted proteins excretion.

Advanced Oxidation Processes and Biotechnological Alternatives for the Treatment of Tannery Wastewater

The tannery industry is one of the economic sectors that contributes to the development of different countries. Globally, Europe and Asia are the main producers of this industry, although Latin America and Africa have been growing considerably in recent years. With this growth, the negative environmental impacts towards different ecosystem resources as a result of the discharges of recalcitrated pollutants, have led to different investigations to generate alternative solutions. Worldwide, different technologies have been studied to address this problem, biological and physicochemical processes have been widely studied, presenting drawbacks with some recalcitrant compounds. This review provides a context on the different existing technologies for the treatment of tannery wastewater, analyzing the physicochemical composition of this liquid waste, the impact it generates on human health and ecosystems and the advances in the different existing technologies, focusing on advanced oxidation processes and the use of microalgae. The coupling of advanced oxidation processes with biological processes, mainly microalgae, is seen as a viable biotechnological strategy, not only for the removal of pollutants, but also to obtain value-added products with potential use in the biorefining of the biomass.

An overview on heavy metal resistant microorganisms for simultaneous treatment of multiple chemical pollutants at co-contaminated sites, and their multipurpose application

Anthropogenic imbalance of chemical pollutants in environment raises serious threat to all life forms. Contaminated sites often possess multiple heavy metals and other types of pollutants. Elimination of chemical pollutants at co-contaminated sites is imperative for the safe ecosystem functions, and simultaneous removal approach is an attractive scheme for their remediation. Different conventional techniques have been applied as concomitant treatment solution but fall short at various parameters. In parallel, use of microorganisms offers an innovative, cost effective and ecofriendly approach for simultaneous treatment of various chemical pollutants. However, microbiostasis due to harmful effects of heavy metals or other contaminants is a serious bottleneck facing remediation practices in co-contaminated sites. But certain microorganisms have unique mechanisms to resist heavy metals, and can act on different noxious wastes. Considering this significant, my review provides information on different heavy metal resistant microorganisms for bioremediation of different chemical pollutants, and other assistance. In this favour, the integrated approach of simultaneous treatment of multiple heavy metals and other environmental contaminants using different heavy metal resistant microorganisms is summarized. Further, the discussion also intends toward the use of heavy metal resistant microorganisms associated with industrial and environmental applications, and healthcare. PREFACE: Simultaneous treatment of multiple chemical pollutants using microorganisms is relatively a new approach. Therefore, this subject was not well received for review before. Also, multipurpose application of heavy metal microorganisms has certainly not considered for review. In this regard, this review attempts to gather information on recent progress on studies on different heavy metal resistant microorganisms for their potential of treatment of co-contaminated sites, and multipurpose application.

Growth inhibition of sulfate-reducing bacteria for trichloroethylene dechlorination enhancement

Trichloroethylene (TCE) is a frequently found organic contaminant in polluted-groundwater. In this microcosm study, effects of hydrogen-producing bacteria [Clostridium butyricum (Clostridium sp.)] and inhibitor of sulfate-reducing bacteria (SRB) addition on the enhancement of TCE dechlorination were evaluated. Results indicate that Clostridium sp. supplement could effectively enhance TCE reductive dechlorination (97.4% of TCE removal) due to increased hydrogen concentration and Dehalococcoides (DHC) populations (increased to 1 × 10⁴ gene copies/L). However, addition of Clostridium sp. also caused the increase in dsrA (dissimilatory sulfide reductase subunit A) (increased to 2 × 10⁸ gene copies/L), and thus, part of the hydrogen was consumed by SRB, which would limit the effective application of hydrogen by DHC. Control of Clostridium sp. addition is a necessity to minimize the adverse impact of Clostridium sp. on DHC growth. Ferric citrate caused the slight raise of the oxidation-reduction state, which resulted in growth inhibition of SRB. Molybdate addition inhibited the growth of SRB, and thus, the dsrA concentrations (dropped from 4 × 10⁷ to 9 × 10⁵ gene copies/L) and sulfate reduction efficiency were decreased. Increased DHC populations (increased from 8 × 10³ to 1 × 10⁵ gene copies/L) were due to increased available hydrogen (increased from 0 to 2 mg/L), which enhanced TCE dechlorination (99.3% TCE removal). Metagenomic analyses show that a significant microbial diversity was detected in microcosms with different treatments. Clostridium sp., ferric citrate, and molybdate addition caused a decreased SRB communities and increased fatty acid production microbial communities (increased from 4.9% to 20.2%), which would be beneficial to the hydrogen production and TCE dechlorination processes.

Evaluation of Toxicity on Ctenopharyngodon idella Due to Tannery Effluent Remediated by Constructed Wetland Technology

Aquatic pollution caused by industrial effluents is an environmental issue, imposing deleterious impacts on the overall environment, specifically, on humans, by disrupting the balance of the ecosystem. Among all the industries, tanneries are considered some of the most polluting due to heavy use of toxic organic and inorganic compounds during leather processing, most of which find their way into rivers, lakes, and streams, thus exerting adverse effects on aquatic life, particularly on fish. Considering the huge concentrations of pollutants present in tannery effluents, toxicity evaluation is of prime importance. Therefore, bioassays are usually employed to assess the acute toxicity of industrial effluents and efficiency of effluent clean-up technologies as they provide a thorough response of test species to the substances present in the tested media. In the present study, the toxic effects of tannery effluent on common grass carp (Ctenopharyngodon idella) were studied for 96 h in laboratory conditions. The effluent was added at different concentrations, before and after treatment by constructed wetlands (CWs). During this period, mortality data was collected to calculate the 96 h-LC50 (lethal concentration inducing 50% mortality) and acute toxicity of C. idella. In addition to this, observations on change in morphological, physiological, and behavioural patterns were also made every 24 h. The present toxicity assay revealed that the raw tannery effluent changed the morphology, physiology, and behavioural response of fish. Moreover, fish exposure to raw/untreated effluent caused high acute toxicity and 100% mortality, due to the presence of high concentrations of salts and chromium (Cr) metal. While treatment of tannery effluent by CWs vegetated with different plants (B. mutica, L. fusca, and T. domingensis) significantly reduced its toxicity and fish mortality as well, and inoculation of salt and Cr-tolerant endophytic bacteria (Enterobacter sp. HU38, Microbacterium arborescens HU33, and Pantoea stewartii ASI11) further reduced (up to 90%) its toxicity level. Hence, the use of CWs for tannery effluent treatment can be recommended to favour public health and promote the overall safety of the environment.

High adsorption performance of synthesized hexametaphosphate green rust towards Cr(VI) removal and its mechanism explorations

Hexametaphosphate intercalated green rust (hexa-P GR) was fabricated by a coprecipitation process in an anaerobic environment to improve the adsorption of hexa-P GR for Cr(VI) and the total Cr under various aqueous conditions. Three kinetic models including the pseudo-first-order, intraparticle, and Elovich were appropriate in describing the adsorption of hexa-P GR towards Cr(VI) and the total Cr. The maximum mono-layer adsorption capacities (mg/g) of hexa-P GR for Cr(VI) at pH of 2 and 7 were 87.64 and 92.25, respectively, with the theoretical maximum capacity (mg/g) of 52.73 being obtained at pH of 7. Some competing cations existing in solutions such as Al³⁺, Ca²⁺, and Mg²⁺ would consume more hexa-P GR to remove Cr species. The neutral and weak alkaline environment was conducive to the hexa-P GR reuse, while the strong alkaline environment was beneficial to the removal of the total Cr. The orthogonal variables including the initial pH, the flow rate, and the Cr(VI) concentration all significantly influenced Cr removal. The sequences of reaction pathways referring to the adsorption of hexa-P GR differently occurred in various pH conditions.

Floating treatment wetlands as biological buoyant filters for wastewater reclamation

Floating treatment wetlands (FTWs) are an innovative product of ecological engineering that can play a promising role in wastewater treatment. It provides low-cost, eco-friendly, and sustainable solutions for the treatment of wastewater, particularly in regions with economic constraints. Generally, FTWs comprise rooted plants that grow on the surface of water with their roots extending down into the pelagic zone rather than being embedded into the sediments. This drooping structure helps develop (1) a hydraulic flow between the root network and the bottom of the treatment system and (2) a large biologically active surface area for the physical entrapment (filtration) of contaminants, as well as their biochemical transformation and degradation. Furthermore, the rooted network allows proliferation of microorganisms that form biofilms and enhance pollutant degradation while promoting plant growth. The augmentation of bacteria in FTWs has been proven to be the most effective approach for reclamation of wastewater. This article discusses the operational parameters of FTWs for maximal remediation of wastewater and highlights the importance of plant-bacteria partnerships in a typical FTW system for enhanced cleanup of wastewater. We propose that this technology is preferable over other methods that require high energy, costs, and area to install or operate machinery.