Thermal properties and surface reactivity in simulated body fluid of new strontium ion-containing phosphate glasses

Response of Various Yb3+-Doped Oxide Glasses to Different Radiation Treatments

The radiation effects of electrons and protons on the spectroscopic and optical properties of oxide glasses doped with Yb3+ in various glass systems were investigated to understand the impact of the glass composition on the glass photo-response. Changes in the optical and emission properties were seen after the radiation treatment, and the magnitude of the changes depended on the irradiation source and dose. For all the investigated materials, the absorption coefficients in the 200-550 nm range increase post-irradiation, revealing the formation of defects in the glasses during the irradiation. While the spectroscopic properties of the tellurite glass remain unchanged, a small reduction in the Yb3+ emission intensity was seen after irradiating the phosphate, borosilicate, and germanate glasses, indicating that a reduction of Yb3+ to Yb2+ might occur in these glasses during the radiation treatment. The changes in the optical and spectroscopic properties after proton irradiation are small as they are localized at the surface of the glasses due to the shallow penetration depth of the proton in the glass. Even though the doses are small, the electron irradiation produces larger changes in the optical and spectroscopic properties since the electrons penetrate the entire volume of the glasses. All the changes in the optical and spectroscopic properties of the glasses were successfully reversed after a short heat treatment revealing the reversible nature of the photo-response of the investigated glasses.

Infrared Nanosecond Laser Texturing of Cu-Doped Bioresorbable Calcium Phosphate Glasses

The surface modification of bioactive glasses significantly impacts their performance for in-vivo biomedical applications. An affordable nanosecond pulsed laser surface-modification technique would provide great flexibility in applications such as cell scaffolding and fouling/anti-fouling engineered surfaces. This study reports on an infrared nanosecond laser modification technique we developed and applied to a Cu-doped bioresorbable calcium phosphate glass. With this technique, clean micro-protrusion features could be produced. By tuning the laser parameters such as the laser scan speed and average power, the width and height of the formed protrusions could be controlled. Finally, optimal laser parameters were defined to obtain complex surface textures without significant damage or thermal-stress-induced cracks. These results could provide effective aid for the affordable, fast, and selective surface texturing of metal-doped bioglasses, opening new possibilities in their application in the biological field.

Surface Modification of Bioactive Glass Promotes Cell Attachment and Spreading

Phosphate glasses have several advantages over traditional silicate-based bioglasses but are inferior in the crucial step of cell attachment to their surface. Here, as a proof of concept, we analyze fibroblast attachment to the phosphate glass surface subjected to basic treatment and silanization. Silicate (S53P4)- and phosphate (Sr50)-based bioactive glasses were either untreated or surface-treated with basic buffer and functionalized with silane. The surface-treated samples were studied as such and after fibronectin was adsorbed on to their surface. With both glass types, surface treatment enhanced fibroblast adhesion and spreading in comparison to the untreated glass. The surface-treated Sr50 glass allowed for cell adhesion, proliferation, and spreading to a similar extent as seen with S53P4 and borosilicate control glasses. Here, we show that surface treatment of bioactive glass can be used to attract cell adhesion factors found in the serum and promote cell-material adhesion, both important for efficient tissue integration.

Surface Modification of Bioresorbable Phosphate Glasses for Controlled Protein Adsorption

The traditional silicate bioactive glasses exhibit poor thermal processability, which inhibits fiber drawing or sintering into scaffolds. The composition of the silicate glasses has been modified to enable hot processing. However, the hot forming ability is generally at the expense of bioactivity. Metaphosphate glasses, on the other hand, possess excellent thermal processability, congruent dissolution, and a tailorable degradation rate. However, due to the layer-by-layer dissolution mechanism, cells do not attach to the material surface. Furthermore, the congruent dissolution leads to a low density of OH groups forming on the glass surface, limiting the adsorption of proteins. It is well regarded that the initial step of protein adsorption is critical as the cells interact with this protein layer, rather than the biomaterial itself. In this paper, we explore the possibility of improving protein adsorption on the surface of phosphate glasses through a variety of surface treatments, such as washing the glass surface in acidic (pH 5), neutral, and basic (pH 9) buffer solutions followed or not by a treatment with (3-aminopropyl)triethoxysilane (APTS). The impact of these surface treatments on the surface chemistry (contact angle, ζ-potential) and glass structure (FTIR) was assessed. In this manuscript, we demonstrate that understanding of the material surface chemistry enables to selectively improve the adsorption of albumin and fibronectin (used as model proteins). Furthermore, in this study, well-known silicate bioactive glasses (i.e., S53P4 and 13-93) were used as controls. While surface treatments clearly improved proteins adsorption on the surface of both silicate and phosphate glasses, it is of interest to note that protein adsorption on phosphate glasses was drastically improved to reach similar protein grafting ability to the silicate bioactive glasses. Overall, this study demonstrates that the limited cell/phosphate glass biological response can easily be overcome through deep understanding and control of the glass surface chemistry.

Impact of Glass Composition on Hydrolytic Degradation of Polylactide/Bioactive Glass Composites

Understanding the degradation of a composite material is crucial for tailoring its properties based on the foreseen application. In this study, poly-L,DL-lactide 70/30 (PLA70) was compounded with silicate or phosphate bioactive glass (Si-BaG and P-BaG, respectively). The composite processing was carried out without excessive thermal degradation of the polymer and resulted in porous composites with lower mechanical properties than PLA70. The loss in mechanical properties was associated with glass content rather than the glass composition. The degradation of the composites was studied for 40 weeks in Tris buffer solution Adding Si-BaG to PLA70 accelerated the polymer degradation in vitro more than adding P-BaG, despite the higher reactivity of the P-BaG. All the composites exhibited a decrease in mechanical properties and increased hydrophilicity during hydrolysis compared to the PLA70. Both glasses dissolved through the polymer matrix with a linear, predictable release rate of ions. Most of the P-BaG had dissolved before 20 weeks in vitro, while there was still Si-BaG left after 40 weeks. This study introduces new polymer/bioactive glass composites with tailorable mechanical properties and ion release for bone regeneration and fixation applications.

Multiple and Promising Applications of Strontium (Sr)-Containing Bioactive Glasses in Bone Tissue Engineering

Improving and accelerating bone repair still are partially unmet needs in bone regenerative therapies. In this regard, strontium (Sr)-containing bioactive glasses (BGs) are highly-promising materials to tackle this challenge. The positive impacts of Sr on the osteogenesis makes it routinely used in the form of strontium ranelate (SR) in the clinical setting, especially for patients suffering from osteoporosis. Therefore, a large number of silicate-, borate-, and phosphate-based BGs doped with Sr and produced in different shapes have been developed and characterized, in order to be used in the most advanced therapeutic strategies designed for the management of bone defects and injuries. Although the influence of Sr incorporation in the glass is debated regarding the obtained physicochemical and mechanical properties, the biological improvements have been found to be substantial both in vitro and in vivo. In the present study, we provide a comprehensive overview of Sr-containing glasses along with the current state of their clinical use. For this purpose, different types of Sr-doped BG systems are described, including composites, coatings and porous scaffolds, and their applications are discussed in the light of existing experimental data along with the significant challenges ahead.

In-vitro dissolution characteristics and human adipose stem cell response to novel borophosphate glasses

The main drawbacks of traditional silicate bioactive glasses are their narrow hot forming domain and noncongruent dissolution. In this article, we report on new borophosphate glasses [xM_n O_m  + (100 - x) (47.5P₂ O₅  + 2.5B₂ O₃  + 10Na₂ O + 20CaO + 20SrO)], M_n O_m being CuO, Ag₂ O, and CeO₂ , having high thermal processability, hence suitable for fiber drawing and sintering into scaffolds. Furthermore, the glasses dissolve congruently in simulated body fluid (SBF) and TRIS buffer solution, eventually leading to the precipitation of a reactive layer. Human adipose stem cells (hASC) were cultured in media enriched with glass extract at different dilutions, to investigate the optimal ion concentration for cell survival. Cells grew in all the extracts, except in the undiluted Cu-doped glass extract. At dilution 1:10, the lactate dehydrogenase (LDH) activity and cell proliferation were comparable to the control, while at 1:100, the cells proliferated faster than the control. Thus, the reference (undoped), Ag and Ce-doped glasses were found to be suitable for cell viability and proliferation. Cytotoxicity assessments using the LDH assay indeed revealed the high cytotoxicity of the Cu extract. This raises questions about the use of Cu in bioactive glasses and its optimal concentration as a dopant.

Structural and physico-chemical analysis of calcium/strontium substituted, near-invert phosphate based glasses for biomedical applications

Neutron diffraction, ²³Na and ³¹P NMR, and FTIR spectroscopy have been used to investigate the structural effects of substituting CaO with SrO in a 40P₂O₅·(16-x)CaO·20Na₂O·24MgO·xSrO glass, where x is 0, 4, 8, 12 and 16mol%. The ³¹P solid-state NMR results showed similar amounts of Q¹ and Q² units for all of the multicomponent glasses investigated, showing that the substitution of Sr for Ca has no effect on the phosphate network. The M-O coordinations (M=Mg, Ca, Sr, Na) were determined for binary alkali and alkaline earth metaphosphates using neutron diffraction and broad asymmetric distributions of bond length were observed, with coordination numbers that were smaller and bond lengths that were shorter than in corresponding crystals. The Mg-O coordination number was determined most reliably as 5.0(2). The neutron diffraction results for the multicomponent glasses are consistent with a structural model in which the coordination of Ca, Sr and Na is the same as in the binary metaphosphate glass, whereas there is a definite shift of Mg-O bonds to longer distance. There is also a small but consistent increase in the Mg-O coordination number and the width of the distribution of Mg-O bond lengths, as Sr substitutes for Ca. Functional properties, including glass transition temperatures, thermal processing windows, dissolution rates and ion release profiles were also investigated. Dissolution studies showed a decrease in dissolution rate with initial addition of 4mol% SrO, but further addition of SrO showed little change. The ion release profiles followed a similar trend to the observed dissolution rates. The limited changes in structure and dissolution rates observed for substitution of Ca with Sr in these fixed 40mol% P₂O₅ glasses were attributed to their similarities in terms of ionic size and charge.

STATEMENT OF SIGNIFICANCE

Phosphate based glasses are extremely well suited for the delivery of therapeutic ions in biomedical applications, and in particular strontium plays an important role in the treatment of osteoporosis. We show firstly that the substitution of strontium for calcium in bioactive phosphate glasses can be used to control the dissolution rate of the glass, and hence the rate at which therapeutic ions are delivered. We then go on to examine in detail the influence of Sr/Ca substitution on the atomic sites in the glass, using advanced structural probes, especially neutron diffraction. The environments of most cations in the glass are unaffected by the substitution, with the exception of Mg, which becomes more disordered.

Characterization of the mechanical behaviors and bioactivity of tetrapod ZnO whiskers reinforced bioactive glass/gelatin composite scaffolds

The purpose of this study is to construct bone tissue engineering scaffold with high porosity, good mechanical properties, and biological activities. Bioactive glass/gelatin composite scaffolds with different amounts of tetrapod zinc oxide whiskers were produced. The morphology, mechanical properties and in vitro bioactivity of the composite scaffolds were investigated. Results showed that, the composite scaffolds had open pores with a high degree of interconnectivity, and the porosity was higher than 80%. With the amount of ZnO whiskers increased, the mechanical properties of scaffolds increased. However, the reinforcing effect began to decrease when the addition is higher than 2wt%, which was resulted by the aggregation of the ZnO whiskers. In vitro test showed that, the composite scaffolds processed good biodegradability, and in vitro apatite-forming ability. The release of zinc ions retarded the growth of the HCA, so the HCA deposited on the scaffolds with ZnO was amorphous and worm-like. Furthermore, the composite scaffolds had good biocompatibility assessed by in vitro cell tests using rMSCs. All results are promising for the application of the composite scaffolds in bone repair.

The influence of SrO and CaO in silicate and phosphate bioactive glasses on human gingival fibroblasts

In this paper, we investigate the effect of substituting SrO for CaO in silicate and phosphate bioactive glasses on the human gingival fibroblast activity. In both materials the presence of SrO led to the formation of a CaP layer with partial Sr substitution for Ca. The layer at the surface of the silicate glass consisted of HAP whereas at the phosphate glasses it was close to the DCPD composition. In silicate glasses, SrO gave a faster initial dissolution and a thinner reaction layer probably allowing for a continuous ion release into the solution. In phosphate glasses, SrO decreased the dissolution process and gave a more strongly bonded reaction layer. Overall, the SrO-containing silicate glass led to a slight enhancement in the activity of the gingival fibroblasts cells when compared to the SrO-free reference glass, S53P4. The cell activity decreased up to 3 days of culturing for all phosphate glasses containing SrO. Whereas culturing together with the SrO-free phosphate glass led to complete cell death at 7 days. The glasses containing SrO showed rapid cell proliferation and growth between 7 and 14 days, reaching similar activity than glass S53P4. The addition of SrO in both silicate and phosphate glasses was assumed beneficial for proliferation and growth of human gingival fibroblasts due to Sr incorporation in the reaction layer at the glass surface and released in the cell culture medium.