Optimization of decellularized human placental macroporous scaffolds for spermatogonial stem cells homing

The revolutionary role of placental derivatives in biomedical research

The human placenta is a transient yet crucial organ that plays a key role in sustaining the relationship between the maternal and fetal organisms. Despite its historical classification as "biowaste," placental tissues have garnered increasing attention since the early 1900s for their significant medical potential, particularly in wound repair and surgical application. As ethical considerations regarding human placental derivatives have largely been assuaged in many countries, they have gained significant attention due to their versatile applications in various biomedical fields, such as biomedical engineering, regenerative medicine, and pharmacology. Moreover, there is a substantial trend toward various animal product substitutions in laboratory research with human placental derivatives, reflecting a broader commitment to advancing ethical and sustainable research methodologies. This review provides a comprehensive examination of the current applications of human placental derivatives, explores the mechanisms behind their therapeutic effects, and outlines the future potential and directions of this rapidly advancing field.

Bioengineering Approaches for Male Infertility: From Microenvironmental Regeneration to in vitro Fertilization

Male factor accounts for 30-50% of infertility cases and may occur due to congenital anomalies or acquired disorders. In such infertility cases where a limited number of mature sperm is produced, a solution is offered to patients with ART applications; however, these methods are inadequate in patients with germ cell aplasia due to damaged microenvironment. Since monolayer cell culture and static culture conditions do not provide the physical conditions of the 3D microenvironment, they have a limited effect on ensuring the execution of in vitro spermatogenesis properly. For this reason, current treatment approaches turn to biomaterial-implemented, microfluidic, and bioreactor systems where 3D physical conditions are provided. This book chapter focuses on static and dynamic culture conditions, as well as the use of biomaterials to increase the success of ex vivo spermatogenesis and microfluidic device-assisted sperm selection in ART.

Optimizations of Placenta Extracellular Matrix-Loaded Silk Fibroin/Alginate 3D-Printed Scaffolds Structurally and Functionally for Bone Tissue Engineering

Recent interest has been focused on extracellular matrix (ECM)-based scaffolds totreat critical-sized bone injuries. In this study, urea was used to decellularize and solubilize human placenta tissue. Then, different concentrations of ECM were composited with 8% alginate (Alg) and 12% silk fibroin (SF) for printing in order to produce a natural 3D construct that resembled bone tissue. The physical and biological features of the printed structures were evaluated entirely in vitro. Finally, a rat model was employed to examine the optimal 3D printed scaffold (5% ECM) as a bone transplant for the healing of cranial bone lesions. The present investigation demonstrated that decellularizing placental tissue fragments led to efficient removal of cell debris. In addition, a remarkable improvement in the printed scaffolds' mechanical and biological properties was observed by increasing the ECM concentration. The histology studies and real-time PCR results demonstrated the acceleration of bone regeneration in the bone lesions treated with 5%ECM-SF/Alg at 4 and 8 weeks after implantation. Overall, these results proved that the placental ECM-printed scaffolds could potentially construct biomimetic grafts to reconstruct significant bone defects and now promise to proceed with clinical studies.

Fabrication and characterization of nanohydroxyapatite/chitosan/decellularized placenta scaffold for bone tissue engineering applications

Novel biomaterials are necessary to fabricate biomimetic scaffolds for bone tissue engineering. In the present experiment, we aimed to fabricate and evaluate the osteogenic properties of nanohydroxyapatite/chitosan/decellularized placenta (nHA.Cs.dPL) composite scaffolds. The human placenta was decellularized (dPL), characterized, and digested in pepsin to form the hydrogel. nHA.Cs.dPL scaffolds were fabricated using salt leaching/freeze drying and evaluated for their morphology, chemical composition, swelling, porosity, degradation, mechanical strength, and biocompatibility. Saos-2 cells were seeded on scaffolds, and their osteogenic properties were investigated by evaluating alkaline phosphatase (ALP), osteocalcin (OCN), collagen type 1 (COL I) expression, and calcium deposition under osteogenic differentiation. The dPL was prepared with minimized DNA content and a well-preserved porous structure. Scaffolds were highly porous with interconnected pores and exhibited appropriate swelling and degradation rates supporting saos-2 cell attachment and proliferation. dPL improved scaffold physicochemical features and increased cell proliferation, ALP, OCN, COL I expression, and calcium deposition under osteogenic differentiation induction. nHA.Cs.dPL composite scaffolds provide a 3D microenvironment with superior physicochemical features that support saos-2 cell adhesion, proliferation, and osteogenic differentiation.

In vitro proliferation and differentiation of mouse spermatogonial stem cells in decellularized human placenta matrix

Utilizing natural scaffold production derived from extracellular matrix components presents a promising strategy for advancing in vitro spermatogenesis. In this study, we employed decellularized human placental tissue as a scaffold, upon which neonatal mouse spermatogonial cells (SCs) were cultured three-dimensional (3D) configuration. To assess cellular proliferation, we examined the expression of key markers (Id4 and Gfrα1) at both 1 and 14 days into the culture. Our quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis revealed a notable increase in Gfrα1 gene expression, with the 3D culture group exhibiting the highest levels. Furthermore, the relative frequency of Gfrα1-positive cells significantly rose from 38.1% in isolated SCs to 46.13% and 76.93% in the two-dimensional (2D) and 3D culture systems, respectively. Moving forward to days 14 and 35 of the culture period, we evaluated the expression of differentiating markers (Sycp3, acrosin, and Protamine 1). Sycp3 and Prm1 gene expression levels were upregulated in both 2D and 3D cultures, with the 3D group displaying the highest expression. Additionally, acrosin gene expression increased notably within the 3D culture. Notably, at the 35-day mark, the percentage of Prm1-positive cells in the 3D group (36.4%) significantly surpassed that in the 2D group (10.96%). This study suggests that the utilization of placental scaffolds holds significant promise as a bio-scaffold for enhancing mouse in vitro spermatogenesis.

Decellularized Placental Sponge Seeded with Human Mesenchymal Stem Cells Improves Deep Skin Wound Healing in the Animal Model

Skin injuries lead to a large burden of morbidity. Although numerous clinical and scientific strategies have been investigated to repair injured skin, optimal regeneration therapy still poses a considerable obstacle. To address this challenge, decellularized extracellular matrix-based scaffolds recellularized with stem cells offer significant advancements in skin regeneration and wound healing. Herein, a decellularized human placental sponge (DPS) was fabricated using the decellularization and freeze-drying technique and then recellularized with human adipose-derived mesenchymal cells (MSCs). The biological and biomechanical properties and skin full-thickness wound healing capacity of the stem cells-DPS constructs were investigated in vitro and in vivo. The DPS exhibited a uniform 3D microstructure with an interconnected pore network, 89.21% porosity, a low degradation rate, and good mechanical properties. The DPS and MSCs-DPS constructs were implanted in skin full-thickness wound models in mice. An accelerated wound healing was observed in the wounds implanted with the MSCs-DPS construct when compared to DPS and control (wounds with no treatment) during 7 and 21 days postimplantation follow-up. In the MSCs-DPS group, the wound was completely re-epithelialized, the epidermis layer was properly organized, and the dermis and epidermis' bilayer structures were restored after 7 days. Our findings suggest that DPS is an excellent carrier for MSC culture and delivery to skin wounds and now promises to proceed with clinical evaluations.

Resveratrol-loaded decellularized ovine pericardium: ECM introduced for tissue engineering

An ideal scaffold for skin tissue engineering should have a suitable potential for antibacterial activity, no hemolysis, sufficient porosity for air exchange, water retention capacity, and a suitable swelling rate to maintain tissue moisture. Considering this issue, our study used decellularized ovine pericardial tissue's extracellular matrix (ECM). These scaffolds were decellularized with sodium dodecyl sulfate (SDS) and sodium deoxycholate (SD) detergents along with vacuum methods. Following imaging with scanning electron microscopy (SEM), analysis of the mechanical properties, and the measurement of the amount of DNA, collagen, and glycosaminoglycan (GAG), our study observed that the three-dimensional (3D) structure of ECM was largely preserved. Resveratrol (RES) 400 µg/µL was loaded into the above scaffold, and analysis revealed that scaffolds containing RES and with vacuum reported higher antibacterial properties, a higher swelling rate, and increased water retention capacity. The biocompatibility and hemocompatibility properties of the above scaffolds also reported a significant difference between methods of decellularization.

Polycaprolactone/Testicular Extracellular Matrix/Graphene Oxide-Based Electrospun Tubular Scaffolds for Reproductive Medicine: Biomimetic Architecture of Seminiferous Tubules

Numerous scaffolds are developed in the field of testicular bioengineering. However, effectively replicating the spatial characteristics of native tissue, poses a challenge in maintaining the requisite cellular arrangement essential for spermatogenesis. In order to mimic the structural properties of seminiferous tubules, the objective is to fabricate a biocompatible tubular scaffold. Following the decellularization process of the testicular tissue, validation of cellular remnants' elimination from the specimens is conducted using 4',6-diamidino-2-phenylindole staining, hematoxylin and eosin staining, and DNA content analysis. The presence of extracellular matrix (ECM) components is confirmed through Alcian blue, Orcein, and Masson's trichrome staining techniques. The electrospinning technique is employed to synthesize the scaffolds using polycaprolactone (PCL), extracted ECM, and varying concentrations of graphene oxide (GO) (0.5%, 1%, and 2%). Subsequently, comprehensive evaluations are performed to assess the properties of the synthetic scaffolds. These evaluations encompass Fourier-transform infrared spectroscopy, scanning electron microscopy imaging, scaffold degradation testing, mechanical behavior analysis, methylthiazolyldiphenyl-tetrazolium bromide assay, and in vivo biocompatibility assessment. The PCL/decellularized extracellular matrix with 0.5% GO formulation exhibits superior fiber morphology and enhanced mechanical properties, and outperforms other groups in terms of in vitro biocompatibility. Consequently, these scaffolds present a viable option for implementation in "in vitro spermatogenesis" procedures, holding promise for future sperm production from spermatogonial cells.

The Decellularized Calf Testis: Introducing Suitable Scaffolds for Spermatogenesis Studies

BACKGROUND

Men's infertility and lack of production of healthy and active sperm are concerns of recent years in most countries. Studies on the preparation of extracellular matrix (ECM) from decellularization of testis tissue and spermatogenesis could provide proper results to solve some of the men's infertility problems. This study aims to decellularize calf testis by different methods to reach a suitable scaffold and introduce it in spermatogenesis studies.

MATERIALS AND METHODS

In this experimental study, calf testis were decellularized by a freeze-de freeze, 1% sodium deoxycholate (SD), 0.1% sodium dodecyl sulfate (SDS), 0.1% SDS-vacuum, 1% SDS, 1% SDS-vacuum, and Triton- X100 methods. The content of DNA, collagen, and glycosaminoglycan (GAG) was analyzed using the kit and staining with Hematoxylin-Eosin, Masson's trichrome, Alcian blue, and Orcein methods. The morphology of the scaffolds was analyzed with a scanning electron microscope (SEM).

RESULTS

Methods of 1% SDS, 1% SDS-vacuum, and 1% SD completely removed the cells. The preservation of collagen and GAG was confirmed using the staining kit and methods. The use of a vacuum showed greater porosity in the SEM images. Toxicity and hemolysis were not observed in the scaffolds.

CONCLUSION

Testis decellularization with 1% SDS and 1% SD, in addition to cell removal, could maintain the ECM structure to a large extent without having cytotoxic and hemolysis effects.

Advances of three-dimensional (3D) culture systems for in vitro spermatogenesis

The loss of germ cells and spermatogenic failure in non-obstructive azoospermia are believed to be the main causes of male infertility. Laboratory studies have used in vitro testicular models and different 3-dimensional (3D) culture systems for preservation, proliferation and differentiation of spermatogonial stem cells (SSCs) in recent decades. The establishment of testis-like structures would facilitate the study of drug and toxicity screening, pathological mechanisms and in vitro differentiation of SSCs which resulted in possible treatment of male infertility. The different culture systems using cellular aggregation with self-assembling capability, the use of different natural and synthetic biomaterials and various methods for scaffold fabrication provided a suitable 3D niche for testicular cells development. Recently, 3D culture models have noticeably used in research for their architectural and functional similarities to native microenvironment. In this review article, we briefly investigated the recent 3D culture systems that provided a suitable platform for male fertility preservation through organ culture of testis fragments, proliferation and differentiation of SSCs.

Monomeric glutaraldehyde fixation and amino acid detoxification of decellularized bovine pericardium for production of biocompatible tissue with tissue-guided regenerative potential

The effect of monomeric glutaraldehyde fixation and amino acid detoxification on biocompatibility and tissue-guided regenerative potential of decellularized bovine pericardium was evaluated. The degree of cross-linking, porosity, enzymatic degradation, alpha-galactosyl content, the efficacy of detoxification, and cytotoxicity towards human epithelial cells were assessed. Tissue was subcutaneously implanted for eight weeks in male juvenile Sprague-Dawley rats, and mechanical properties, host cell infiltration, and calcification were evaluated. Three groups were compared i) decellularized tissue, ii) decellularized, monomeric glutaraldehyde fixed and amino acid detoxified tissue, and iii) commercial glutaraldehyde fixed non-decellularized tissue (Glycar®) (n = 6 rats per group). The fixation process gave a high degree of cross-linking (>85%), and was resistant to enzymatic degradation, with no significant effect on porosity. The detoxification process was effective, and the tissue was not toxic to mammalian cells in vitro. Tissue from both decellularized groups had significantly higher (p < 0.05) porosity and host cell infiltration in vivo. The process mitigated calcification. A non-significant decrease in the alpha-galactosyl content was observed, which increased when including the alpha-galactosidase enzyme. Mechanical properties were maintained. The fixation and detoxification process adequately removes free aldehyde groups and reduces toxicity, preventing enzymatic degradation and allowing for host cell infiltration while mitigating calcification and retaining the mechanical properties of the tissue. This process can be considered for processing decellularized bovine pericardium with tissue-guided regeneration potential for use in cardiovascular bioprostheses; however, methods of further reducing antigenicity, such as the use of enzymes, should be investigated.

Antimicrobial peptide-loaded decellularized placental sponge as an excellent antibacterial skin substitute against XDR clinical isolates

Post-wound infections have remained a serious threat to society and healthcare worldwide. Attempts are still being made to develop an ideal antibacterial wound dressing with high wound-healing potential and strong antibacterial activity against extensively drug-resistant bacteria (XDR). In this study, a biological-based sponge was made from decellularized human placenta (DPS) and then loaded with different concentrations (0, 16 µg/mL, 32 µg/mL, 64 µg/mL) of an antimicrobial peptide (AMP, CM11) to optimize an ideal antibacterial wound dressing. The decellularization of DPS was confirmed by histological evaluations and DNA content assay. The DPS loaded with different contents of antimicrobial peptides (AMPs) showed uniform morphology under a scanning electron microscope (SEM) and cytobiocompatibility for human adipose tissue-derived mesenchymal stem cells. Antibacterial assays indicated that the DPS/AMPs had antibacterial behavior against both standard strain and XDR Acinetobacter baumannii in a dose-dependent manner, as DPS loaded with 64 µg/mL showed the highest bacterial growth inhibition zone and elimination of bacteria under SEM than DPS alone and DPS loaded with 16 µg/mL and 32 µg/mL AMP concentrations. The subcutaneous implantation of all constructs in the animal model demonstrated no sign of acute immune system reaction and graft rejection, indicating in vivo biocompatibility of the scaffolds. Our findings suggest the DPS loaded with 64 µg/mL as an excellent antibacterial skin substitute, and now promises to proceed with pre-clinical and clinical investigations.

Placental-Derived Biomaterials and Their Application to Wound Healing: A Review

Chronic wounds are associated with considerable patient morbidity and present a significant economic burden to the healthcare system. Often, chronic wounds are in a state of persistent inflammation and unable to progress to the next phase of wound healing. Placental-derived biomaterials are recognized for their biocompatibility, biodegradability, angiogenic, anti-inflammatory, antimicrobial, antifibrotic, immunomodulatory, and immune privileged properties. As such, placental-derived biomaterials have been used in wound management for more than a century. Placental-derived scaffolds are composed of extracellular matrix (ECM) that can mimic the native tissue, creating a reparative environment to promote ECM remodeling, cell migration, proliferation, and differentiation. Reliable evidence exists throughout the literature to support the safety and effectiveness of placental-derived biomaterials in wound healing. However, differences in source (i.e., anatomical regions of the placenta), preservation techniques, decellularization status, design, and clinical application have not been fully evaluated. This review provides an overview of wound healing and placental-derived biomaterials, summarizes the clinical results of placental-derived scaffolds in wound healing, and suggests directions for future work.

Pipeline for precise insoluble matrisome coverage in tissue extracellular matrices

The extracellular matrix (ECM) is assembled by hundreds of proteins orchestrating tissue patterning and surrounding cell fates via the mechanical-biochemical feedback loop. Aberrant ECM protein production or assembly usually creates pathological niches eliciting lesions that mainly involve fibrogenesis and carcinogenesis. Yet, our current knowledge about the pathophysiological ECM compositions and alterations in healthy or diseased tissues is limited since the methodology for precise insoluble matrisome coverage in the ECM is a "bottleneck." Our current study proposes an enhanced sodium dodecyl sulfonate (E-SDS) workflow for thorough tissue decellularization and an intact pipeline for the accurate identification and quantification of highly insoluble ECM matrisome proteins. We tested this pipeline in nine mouse organs and highlighted the full landscape of insoluble matrisome proteins in the decellularized ECM (dECM) scaffolds. Typical experimental validations and mass spectrometry (MS) analysis confirmed very little contamination of cellular debris remaining in the dECM scaffolds. Our current study will provide a low-cost, simple, reliable, and effective pipeline for tissue insoluble matrisome analysis in the quest to comprehend ECM discovery proteomic studies.

Chitosan-Placental ECM Composite Thermos-Responsive Hydrogel as a Biomimetic Wound Dressing with Angiogenic Property

Attempts are being made to develop an ideal wound dressing with excellent biomechanical and biological properties. Here, a thermos-responsive hydrogel is fabricated using chitosan (CTS) with various concentrations (1%, 2.5%, and 5% w/v) of solubilized placental extracellular matrix (ECM) and 20% β-glycerophosphate to optimize a smart wound dressing hydrogel with improved biological behavior. The thermo-responsive CTS (TCTS) alone or loaded with ECMs (ECM-TCTS) demonstrate uniform morphology using SEM. TCTS and ECM1%-TCTS and ECM2.5%-TCTS show a gelation time of 5 min at 37 °C, while no gel formation is observed at 4 and 25 °C. ECM5%-TCTS forms gel at both 25 and 37 °C. The degradation and swelling ratios increase as the ECM content of the hydrogel increase. All the constructs show excellent biocompatibility in vitro and in vivo, however, the hydrogels with a higher concentration of ECM demonstrate better cell adhesion for fibroblast cells and induce expression of angiogenic factors (VEGF and VEGFR) from HUVEC. Only the ECM5%-TCTS has antibacterial activity against Acinetobacter baumannii ATCC 19606. The data obtained from the current study suggest the ECM2.5%-TCTS as an optimized smart biomimetic wound dressing with improved angiogenic properties now promises to proceed with pre-clinical and clinical investigations.

Differentiation of human spermatogonial stem cells using a human decellularized testicular scaffold supplemented by platelet-rich plasma

BACKGROUND

Effective culture systems for attachment, migration, proliferation, and differentiation of spermatogonial stem cells (SSCs) can be a promising therapeutic modality for preserving male fertility. Decellularized extracellular matrix (ECM) from native testis tissue creates a local microenvironment for testicular cell culture. Furthermore, platelet-rich plasma (PRP) contains various growth factors for the proliferation and differentiation of SSCs.

METHODS

In this study, human testicular cells were isolated and cultured for 4 weeks, and SSCs were characterized using immunocytochemistry (ICC) and flow cytometry. Human testicular tissue was decellularized (0.3% SDS, 1% Triton), and the efficiency of the decellularization process was confirmed by histological staining and DNA content analysis. SSCs were cultured on the human decellularized testicular matrix (DTM) for 4 weeks. The viability and the expression of differentiation genes were evaluated by MTT and real-time polymerase chain reaction (PCR), respectively.

RESULTS

Histological evaluation and DNA content analysis showed that the components of ECM were preserved during decellularization. Our results showed that after 4 weeks of culture, the expression levels of BAX, BCL-2, PLZF, and SCP3 were unchanged, while the expression of PRM2 significantly increased in the cells cultured on DTM supplemented with PRP (ECM-PRP). In addition, the expression of GFRA1 was significantly decreased in the ECM group compared to the control and PRP groups. Furthermore, the MTT test indicated that viability was significantly enhanced in cells plated on DTM supplemented with PRP.

CONCLUSION

Our study demonstrated that DTM supplemented with PRP can provide an effective culture system for the differentiation and viability of SSCs.

Coculture of adipose-derived mesenchymal stem cells/macrophages on decellularized placental sponge promotes differentiation into the osteogenic lineage

BACKGROUND

Several factors like three-dimensional microstructure, growth factors, cytokines, cell-cell communication, and coculture with functional cells can affect the stem cells behavior and differentiation. The purpose of this study was to investigate the potential of decellularized placental sponge as adipose-derived mesenchymal stem cells (AD-MSCs) and macrophage coculture systems, and guiding the osteogenic differentiation of stem cells.

METHODS

The decellularized placental sponge (DPS) was fabricated, and its mechanical characteristics were evaluated using degradation assay, swelling rate, and pore size determination. Its structure was also investigated using hematoxylin and eosin staining and scanning electron microscopy. Mouse peritoneal macrophages and AD-MSCs were isolated and characterized. The differentiation potential of AD-MSCs co-cultured with macrophages was evaluated by RT-qPCR of osteogenic genes on the surface of DPS. The in vivo biocompatibility of DPS was determined by subcutaneous implantation of scaffold and histological evaluations of the implanted site.

RESULTS

The DPS had 67% porosity with an average pore size of 238 μm. The in vitro degradation assay showed around 25% weight loss during 30 days in PBS. The swelling rate was around 50% during 72 h. The coculture of AD-MSCs/macrophages on the DPS showed a significant upregulation of four differentiation osteogenic lineage genes in AD-MSCs on days 14 and 21 and a significantly higher mineralization rate than the groups without DPS. Subcutaneous implantation of DPS showed in vivo biocompatibility of scaffold during 28 days follow-up.

CONCLUSIONS

Our findings suggest the decellularized placental sponge as an excellent bone substitute providing a naturally derived matrix substrate with biostructure close to the natural bone that guided differentiation of stem cells toward bone cells and a promising coculture substrate for crosstalk of macrophage and mesenchymal stem cells in vitro.

Engineered models for placental toxicology: Emerging approaches based on tissue decellularization

Recent increases in prescriptions and illegal drug use as well as exposure to environmental contaminants during pregnancy have highlighted the critical importance of placental toxicology in understanding and identifying risks to both mother and fetus. Although advantageous for basic science, current in vitro models often fail to capture the complexity of placental response, likely due to their inability to recreate and monitor aspects of the microenvironment including physical properties, mechanical forces and stiffness, protein composition, cell-cell interactions, soluble and physicochemical factors, and other exogenous cues. Tissue engineering holds great promise in addressing these challenges and provides an avenue to better understand basic biology, effects of toxic compounds and potential therapeutics. The key to success lies in effectively recreating the microenvironment. One strategy to do this would be to recreate individual components and then combine them. However, this becomes challenging due to variables present according to conditions such as tissue location, age, health status and lifestyle. The extracellular matrix (ECM) is known to influence cellular fate by working as a storage of factors. Decellularized ECM (dECM) is a recent tool that allows usage of the original ECM in a refurbished form, providing a relatively reliable representation of the microenvironment. This review focuses on using dECM in modified forms such as whole organs, scaffold sheets, electrospun nanofibers, hydrogels, 3D printing, and combinations as building blocks to recreate aspects of the microenvironment to address general tissue engineering and toxicology challenges, thus illustrating their potential as tools for future placental toxicology studies.

Future Challenges and Opportunities of Extracellular Matrix Hydrogels in Female Reproductive Medicine

Bioengineering and reproductive medicine have progressed shoulder to shoulder for several decades. A key point of overlap is the development and clinical translation of technologies to support reproductive health, e.g., scaffold-free constructs, polymeric scaffolds, bioprinting or microfluidics, and hydrogels. Hydrogels are the focus of intense study, and those that are derived from the extracellular matrix (ECM) of reproductive tissues and organs are emerging as promising new players given their results in pre-clinical models. This literature review addresses the recent advances in the use of organ-specific ECM hydrogels in reproductive medicine, considering the entire female reproductive tract. We discuss in-depth papers describing the development of ECM hydrogels, their use in in vitro models, and their in vivo application in preclinical studies. We also summarize the functions of hydrogels, including as grafts, carriers for cell transplantation, or drug depots, and present the potential and possible scope for use of ECM hydrogels in the near future based on recent scientific advances.

Introduction of an efficient method for placenta decellularization with high potential to preserve ultrastructure and support cell attachment

The placenta, as a large discarded tissue and rich in extracellular matrix (ECM), is an excellent candidate for biological scaffolds in reconstructive medicine. Considering the importance of ECM structure in cell fate, the aim of this study was to achieve human placenta decellularization protocol that preserve the structure of scaffolds. Thus, human placenta was decellularized by four protocols and decellularization efficacy was compared by hematoxylin and eosin (H&E), 4',6-diamidino-2-phenylindole (DAPI) staining, and DNA measurement. Decellularized placenta structure preservation was assessed by Masson's trichrome staining, scanning electron microscopy (SEM), and immunofluorescence (IF) for collagen I, IV, and fibronectin. Finally, liquid displacement measured scaffolds' porosity. After culturing menstrual blood-derived stem cells (MenSCs) on placenta scaffolds, cell adhesion was investigated by SEM imaging, and cell viability and proliferation were assessed by MTT assay. According to H&E and DAPI staining, only protocols 1 and 3 could completely remove cells from the scaffolds. DNA measurements confirmed a significant reduction in the genetic material of decellularized scaffolds compared to native placenta. According to Masson's trichrome, IF, and SEM imaging, scaffold structure is better preserved in P3 than P1 protocol. Liquid displacement showed higher porosity of P3 scaffold than P1. SEM imaging confirmed cells adhesion to the decellularized placenta, and the attached cells showed good viability and maintained their proliferative capacity, indicating the suitability of the scaffolds for cell growth. Results introduced an optimized protocol for placenta decellularization that preserves the scaffold structure and supports cell adhesion and proliferation.