A Long Wavelength Excitable Fluorophore; Chloro Phenyl Imino Propenyl Aniline (CPIPA) for Selective Sensing of Hg (II)

Sensing Cd(II) Using a Disposable Optical Sensor Based on a Schiff Base Immobilisation on a Polymer-Inclusion Membrane. Applications in Water and Art Paint Samples

A disposable colour-changeable optical sensor based on an interesting polymer inclusion-membrane (PIM) was designed to determine Cd(II) ions in aqueous medium. The Schiff base 2-acetylpyridine benzoylhydrazone (2-APBH) immobilised on the polymer membrane was used as a sensing molecule. The amounts of the PIM components were optimised by a 3² fractional factorial design with two central points and two blocks. The best optical sensor composition consisted of 2.5 g of poly(vinylchloride) (PVC) as a base polymer, 3 mL of tributyl phosphate (TBP) as a plasticiser, and 0.02 g of 2-APBH as a reagent. The sensor showed a good linear response in the range from 0.02 mg L⁻¹ (limit of detection) to 1 mg L⁻¹ of Cd(II) under the following experimental conditions: pH 9.5 (adjusted using ammonium chloride buffer solution at 0.337 mol L⁻¹), 60 min of exposure time plus 2 min of sonication (pulses at 2 s intervals), and 10 min of short-term stability. The relative standard deviation of the method was determined to be 4.04% for 0.4 mg L⁻¹ of Cd(II). The optical sensor was successfully applied to the determination of Cd(II) in natural-water and art-paint samples.

Design and optimization of a single-use optical sensor based on a polymer inclusion membrane for zinc determination in drinks, food supplement and foot health care products

A single-use optical sensor was designed for Zn(II) determination based on the immobilisation of the colorimetric reagent 2-acetylpyridine benzoylhydrazone (2-APBH) in a polymer inclusion membrane (PIM) adhered on the surface of an inert rectangular strip of polyester (Mylar). Different components for the membrane preparation were tested and those resulting in membrane with good appearance, proper physical and optical properties and ease of preparation were selected. Factorial design 23 with three replicates of the central point was applied for the optimisation of the membrane composition. The optimal composition consisted of 2.5 g of poly(vinyl chloride) (PVC), 4 mL of tributyl phosphate (TBP) and 0.04 g of 2-APBH. The optode showed a linear dynamic range from 0.03 (detection limit) to 1 mg L-1 of Zn(II) ions with a response time of 30 min in aqueous solution at pH 6 and a relative standard deviation of 3.90% for 0.4 mg L-1 of Zn(II). The sensor exhibited good selectivity to Zn(II) over other commonly ions. It was successfully applied to the determination of Zn(II) in a water certified reference material, spiked tap water, vitamin-mineral drink, food supplement and foot health care products, as contribution to the concern about this heavy metal due to its significant role in many biological and physiological processes although toxicant at high doses.

Facile synthesis of carbon nanobranches towards cobalt ion sensing and high-performance micro-supercapacitors

We present a facile strategy for fabricating a new type of one-dimensional (1D) carbon nanomaterial named carbon nanobranches (CNBs) covered with botryoidal carbon dots (CDs) by direct pyrolysis of a green precursor (starch). The resultant CNBs display both photoluminescence and electrical conductivity and can be assembled into chemical sensors and energy-storage devices. In terms of their bright photoluminescence, CNBs with a fabulous crystalline structure are utilized as fluorescent probes to sensitively and selectively detect Co²⁺ with a very low detection limit of 2.85 nM and a wide linear concentration range from 10 nM to 1 mM. Moreover, an efficient micro-supercapacitor (micro-SC) is constructed based on conductive CNB fibers produced via a customized microfluidic spinning technique. The micro-SCs exhibit a large specific capacitance of 201.4 mF cm^-2, an energy density of 4.5 μW h cm^-2 and high cycling stability, and can successfully power 19 light-emitting diodes (LEDs). The main purpose of this paper is to offer a perspective into simplifying the connecting of research and industry by starting from green carbon-based materials.

Polymer inclusion membranes (PIMs) in chemical analysis - A review

This review highlights the increasing interest in polymer inclusion membranes (PIMs) in analytical chemistry as they are adapted to new and novel applications. PIMs are polymer-based liquid membranes and were first introduced 50 years ago as the sensing membranes in ion-selective electrodes and optodes. More recently however, PIMs have been used for other applications in analytical chemistry such as for sample separation, sample pre-concentration, electro-driven extraction, and passive sampling, and have also been incorporated into on-line and automated analysis systems. The present review provides a general overview of the analytical chemistry applications of PIMs reported in the literature to date and illustrates their versatility for solving challenging chemical analysis problems.

High-resolution Imaging of pH in Alkaline Sediments and Water Based on a New Rapid Response Fluorescent Planar Optode

A new dual-lumophore optical sensor combined with a robust RGB referencing method was developed for two-dimensional (2D) pH imaging in alkaline sediments and water. The pH sensor film consisted of a proton-permeable polymer (PVC) in which two dyes with different pH sensitivities and emission colors: (1) chloro phenyl imino propenyl aniline (CPIPA) and (2) the coumarin dye Macrolex(®) fluorescence yellow 10 GN (MFY-10 GN) were entrapped. Calibration experiments revealed the typical sigmoid function and temperature dependencies. This sensor featured high sensitivity and fast response over the alkaline working ranges from pH 7.5 to pH 10.5. Cross-sensitivity towards ionic strength (IS) was found to be negligible for freshwater when IS <0.1 M. The sensor had a spatial resolution of approximately 22 μm and aresponse time of <120 s when going from pH 7.0 to 9.0. The feasibility of the sensor was demonstrated using the pH microelectrode. An example of pH image obtained in the natrual freshwater sediment and water associated with the photosynthesis of Vallisneria spiral species was also presented, suggesting that the sensor held great promise for the field applications.

An ultra sensitive fluorescent nanosensor for detection of ionic copper

A stable and ultra sensitive nano-scale fluorescent chemo-sensor for trace amounts of Cu(2+) was proposed. The Cu(2+) selective fluoroionophore 2-{[(2-aminophenyl)imino]methyl}-4,6-di-tert-butylphenol (DMK-7) was encapsulated in polymeric ethyl cellulose. The sensing membranes were fabricated in form of nanofibers and thin films. When embedded in polymers, the exploited DMK-7 dye exhibited enhanced photophysical characteristics in absorbance, Stoke's shift, fluorescence quantum yield, and short and long-term photostability with respect to the solution phase. Sensing abilities of the nanofibers and thin films were tested by steady state and time resolved fluorescence spectroscopy. To our knowledge, this is the first attempt using the DMK-7-doped electrospun nanofibrous materials for copper sensing. The offered sensor displayed a sensitive response with a detection limit of 3.3×10(-13) M for Cu(2+) ions over a wide concentration range of 5.0×10(-12)-5.0×10(-5). Additionally, exhibited high selectivity over convenient cations; Na(+), K(+), Ca(2+), Mg(2+), NH4(+) and Ag(+), Al(3+), Ba(2+), Co(2+), Cr(3+), Fe(3+), Fe(2+), Hg(2+), Li(+), Mn(2+), Ni(2+), Pb(2+), Sn(2+) and Zn(2+).