Fluorescent Probe Studies of Polarity and Solvation within Room Temperature Ionic Liquids: A Review

N-octylpyridine hydrogen sulphate ionic liquid for multifunctional fluorescent response in different solvents

Ionic liquids (ILs) have attracted considerable interest in the last two decades owing to their unique fluorescent properties. Herein, N-octylpyridine hydrogen sulphate ([OP]HSO4) was synthesised and characterised using 1H NMR and infrared spectroscopies. In addition, the fluorescence spectra of [OP]HSO4 in water, methanol, ethanol and acetonitrile were studied. In a single solvent, as the concentration of the solvent (methanol, ethanol or acetonitrile) increases, the fluorescence intensity of the IL first increases and then decreases. A similar trend was observed in their mixed solvents with water. Moreover, the fluorescence intensity of [OP]HSO4 decreases with increasing temperature. A fluorescence intensity reduction of only 4.46% for [OP]HSO4 after continuous scanning for 40 cycles under the maximum excitation state was analysed. The lack of photobleaching observed in [OP]HSO4 indicates its good photobleaching resistance.

Probing the heterogeneity of molecular level organization of ionic liquids: a comparative study using neutral Nile red and cationic Nile blue sulfate as fluorescent probes for butyrolactam-based protic ionic liquids

Ionic liquids (ILs) are liquid salts composed of cations and anions, known for their significant local heterogeneity at the molecular level. To understand the microheterogeneity with regard to their local polarity and local viscosity, we have used two structurally similar but chemically distinguishable fluorescent probes: Nile red (NR), a neutral molecule, and Nile blue sulfate (NBS), a charged molecule. A comparative study of the response of the two probes to the molecular level heterogeneity of ILs is expected to provide a better clarity of understanding regarding the charged polar domain and the uncharged hydrophobic domain of ILs. Towards this, we synthesized two butyrolactam-based protic ionic liquids (PILs), i.e., BTF and BTD, with the same ionic headgroup ([BT]+) and different alkyl tails ([RCOO]-), where {R = H, C11H23}. BTF has no significant hydrophobic domain, whereas BTD has a larger hydrophobic domain. Temperature-dependent fluorescence parameters such as fluorescence intensity, lifetime, and anisotropy were measured for both NR and NBS molecules. The use of a pair of structurally similar but ionically different probes enables differential estimation of parameters like the microviscosity of a domain using the fluorescence anisotropy parameter (r). The absorption and emission spectra of both probe molecules are observed to be blue shifted upon going from BTF to BTD. NR showed a significant blue shift in absorption and emission band maxima. Conversely, NBS exhibited a small wavelength shift, possibly influenced by the preferred location of their charged head group domain. Temperature-dependent rotational relaxation time (θ) of NR in BTD is smaller than that of NBS by 60-70%, indicating that stronger charge-charge interactions exist between the polar domain of BTD and NBS. Moreover, it is observed that the local viscosity of the BTF IL around both probes is similar, whereas there is a considerable difference for the BTD IL. These results are an indication that NBS being charged prefers to locate itself in the charged head group region of the IL, whereas NR being neutral tends to reside both in the hydrophobic domain and in the head group but is predominantly located in the hydrophobic domain.

Advances in ionic liquids as fluorescent sensors

Ionic liquids (ILs) are a class of liquid salts with characteristics such as a low melting point, an ionic nature, non-volatility, and tunable properties. Because of their adaptability, they have a significant influence in the field of fluorescence. This paper reviews the primary literature on the use of ILs in fluorescence sensing technologies. The kind of target material is utilized to classify the fluorescence sensors made with the use of ILs. They include using ILs as probes for metals, nitro explosives, small organic compounds, anions, and gases. The efficacy of an IL-based fluorescence sensor depends on the precise design to guarantee specificity, sensitivity, and a consistent reaction to the desired analyte. The precise method can differ depending on the chemical properties of the IL, the choice of fluorophore, and the interactions with the analyte. Overall, the viability of the aforementioned materials for chemical analysis is evaluated, and prospective possibilities for further development are identified.

Correlation of solute diffusion with dynamic viscosity in lithium salt-added (choline chloride + glycerol) deep eutectic solvents

Due to their favorable physicochemical properties, deep eutectic solvents (DESs) are finding increased use in chemistry. Metal salt-added DESs are currently being investigated for their potential applications in electrochemistry as a replacement for organic electrolytes. Insights into solute diffusion in salt-added DESs, in this context, are of the utmost importance. Solute diffusion in a LiCl-added DES composed of the H-bond acceptor choline chloride and the H-bond donor glycerol in a 1 : 2 mole ratio, named glyceline, is assessed as a function of temperature and LiCl concentration. For relative translational diffusion, the fluorophore-quencher pair of pyrene-nitromethane is used, whereas for rotational diffusion a fluorescent anisotropic rotor, perylene, is selected. The fluorescence quenching of pyrene by nitromethane was found to be purely dynamic in nature. The estimated bimolecular quenching rate constant (kq) exhibits excellent adherence to the Stokes-Einstein relation, suggesting relative translational diffusion of the solute to be controlled by the dynamic viscosity of the LiCl-added glyceline solution. The rotational reorientation time (θ) of the rotor perylene is also found to scale with dynamic viscosity and obey the Stokes-Einstein relation satisfactorily. Linear correlation between θ and dynamic viscosity (η) improves for glyceline solutions with fixed LiCl concentrations hinting at the possible change in the hydrodynamic volume with LiCl concentration within the DES. Control of rotational diffusion of the solute by the dynamic viscosity is established nonetheless. The effect of earlier reported micro- and/or nano-heterogeneities within salt-added DES systems on solute diffusion dynamics is found to be minimal. The work highlights DESs in offering a solubilizing medium for solutes where the diffusion dynamics are simply controlled by the dynamic viscosity.

Recent advancements in nanomaterial based optical detection of food additives: a review

Food additives have become a critical component in the food industry. They are employed as preservatives to decelerate the negative effects of environmental and microbial factors on food quality. Currently, food additives are used for a variety of purposes, including colorants, flavor enhancers, nutritional supplements, etc., owing to improvements in the food industry. Since the usage of food additives has increased dramatically, the efficient monitoring of their acceptable levels in food products is quite necessary to mitigate the problems associated with their inappropriate use. The traditional methods used for detecting food additives are generally based on standard spectroscopic and chromatographic techniques. However, these analytical techniques are limited by their high instrumentation cost and time-consuming procedures. The emerging field of nanotechnology has enabled the development of highly sensitive and specific sensors to analyze food additives in a rapid manner. The current article emphasizes the need to detect various food additives owing to their potential negative effects on humans, animals, and the environment. In this article, the role of nanomaterials in the optical sensing of food additives has been discussed owing to their high accuracy, ease-of-use, and excellent sensitivity. The applications of nanosensors for the detection of various food additives have been elaborated with examples. The current article will assist policymakers in developing new rules and regulations to mitigate the adverse effects of toxic food additives on humans and the environment. In addition, the prospects of nanosensors for the optical detection of food additives at a commercial scale have been discussed to combat their irrational use in the food industry.

Rotation of a Charged Spin Probe in Room-Temperature Ionic Liquids

X-band electron paramagnetic resonance spectroscopy has been used to investigate the rotational diffusion of a stable, positively charged nitroxide 4-trimethylammonium-2,2,6,6-tetramethylpiperidine-1-oxyl iodide (Cat-1) in a series of 1-alkyl-3-methylimidazolium tetrafluoroborate room-temperature ionic liquids (RTILs) having alkyl chain lengths from two to eight carbons. The rotation of Cat-1 is anisotropic with the preferential axis of rotation along the NO^• moiety. The Stokes-Einstein-Debye law describes the mean rotational correlation time of Cat-1, assuming that the hydrodynamic radius is smaller than the van der Waals radius of the probe. This implies that the probe rotates freely, experiencing slip boundary condition, which is solvent-dependent. The rotational correlation time of Cat-1 in RTILs can very well be fitted to a power-law functionality with a singular temperature, which suggests that the apparent activation energy of rotation exhibits non-Arrhenius behavior. Compared to the rotation of perdeuterated 2,2,6,6-tetramethyl-4-oxopiperidine-1-oxyl (pDTO), which is neutral, the rotation of Cat-1 is several times slower. The rotational anisotropy, the ratio of the rotational times of pDTO and Cat-1, and the apparent activation energy indicate the transition from a homogeneously globular structure to a spongelike structure when the alkyl chain has four carbons, which is also observed in molecular dynamics computational studies. For the first time, we have been able to show that the rotational correlation time of a solute molecule can be analyzed in terms of the Cohen-Turnbull free volume theory. The Cohen-Turnbull theory fully describes the rotation of Cat-1 in all ionic liquids in the measured temperature range.

Using Microemulsions: Formulation Based on Knowledge of Their Mesostructure

Microemulsions, as thermodynamically stable mixtures of oil, water, and surfactant, are known and have been studied for more than 70 years. However, even today there are still quite a number of unclear aspects, and more recent research work has modified and extended our picture. This review gives a short overview of how the understanding of microemulsions has developed, the current view on their properties and structural features, and in particular, how they are related to applications. We also discuss more recent developments regarding nonclassical microemulsions such as surfactant-free (ultraflexible) microemulsions or ones containing uncommon solvents or amphiphiles (like antagonistic salts). These new findings challenge to some extent our previous understanding of microemulsions, which therefore has to be extended to look at the different types of microemulsions in a unified way. In particular, the flexibility of the amphiphilic film is the key property to classify different microemulsion types and their properties in this review. Such a classification of microemulsions requires a thorough determination of their structural properties, and therefore, the experimental methods to determine microemulsion structure and dynamics are reviewed briefly, with a particular emphasis on recent developments in the field of direct imaging by means of electron microscopy. Based on this classification of microemulsions, we then discuss their applications, where the application demands have to be met by the properties of the microemulsion, which in turn are controlled by the flexibility of their amphiphilic interface. Another frequently important aspect for applications is the control of the rheological properties. Normally, microemulsions are low viscous and therefore enhancing viscosity has to be achieved by either having high concentrations (often not wished for) or additives, which do not significantly interfere with the microemulsion. Accordingly, this review gives a comprehensive account of the properties of microemulsions, including most recent developments and bringing them together from a united viewpoint, with an emphasis on how this affects the way of formulating microemulsions for a given application with desired properties.

Heterogeneous Structures of Ionic Liquids as Probed by CO Rotation with Nuclear Magnetic Resonance Relaxation Analysis and Molecular Dynamics Simulations

The rotational dynamics of carbon monoxide (CO) in ionic liquids (ILs) was investigated by nuclear magnetic resonance (NMR) relaxation measurements and molecular dynamics (MD) simulations. NMR spin-lattice relaxation time measurements were performed for ¹⁷O-enriched CO in 10 ILs (four imidazolium-cation-based, four phosphonium-cation-based, and two ammonium-cation-based ILs, all paired with the bis(trifluorosulfonylmethane)imide anion). In combination with previously reported data for five ILs and viscosity data, our results indicated that the obtained rotational relaxation times (τ_2R) were much smaller than those predicted using the Stokes-Einstein-Debye (SED) theory. For the same viscosity/temperature values, the τ_2R^-1 value increased linearly with increasing carbon number of the alkyl group in the cation. The deviation from the SED equation was due to the insensitivity of τ_2R to the carbon number, even though a higher carbon number generally leads to higher viscosity values for ILs. To investigate the unique rotational properties of CO in the ILs, MD simulations were performed on five representative ILs (two imidazolium, two phosphonium, and one ammonium) containing CO solutes. From rotational correlation function analyses, the CO rotation mainly occurred in a free rotation-like manner within 1 ps, which explained the relative insensitivity of CO rotation to viscosity. In the subsequent time scale (>1 ps), the minor component of the CO rotation was discriminated among different ILs. It was strongly suggested that, because CO preferably locates in the outer part of the alkyl groups in the cation, the slow CO rotation is correlated with the outer alkyl dynamics, which are decoupled from the whole cation rotation.

Preparation of Acifluorfen-Based Ionic Liquids with Fluorescent Properties for Enhancing Biological Activities and Reducing the Risk to the Aquatic Environment

In this work, 12 novel herbicidal ionic liquids (HILs) based on acifluorfen were prepared by pairing with the fluorescent hydrazides or different alkyl chains for increasing activities and reducing negative impacts on the aquatic environment. The results showed that the fluorescence of coumarin hydrazide in the HILs was applied as the internal and supplementary light source to meet the requirement of light wavelength range of acifluorfen, which improved the phytotoxicity of acifluorfen to weeds by enhancing singlet oxygen generation with increased sunlight utilization. The herbicidal activities of HILs were related positively with the length of chain of cation under high light intensity and depended mainly on the fluorescence characteristic of the cation under low light intensity, and the double salt IL forms of acifluorfen containing coumarin hydrazide and n-hexadecyltrimethylammonium had enhanced efficacies against broadleaf weeds in the field. Compared with acifluorfen sodium, HILs had lower water solubility, better surface activity, weaker mobility in soils, and higher decomposition temperature. These results demonstrated that HILs containing different cations provided a wider scope for fine-tuning of the physicochemical and biological properties of herbicides and established a promising way for the development of environmentally friendly herbicidal formulations.

Electrospinning chiral fluorescent nanofibers from helical polyacetylene: preparation and enantioselective recognition ability

Chirality is ubiquitous in nature and closely related to the pharmacological effects of chiral drugs. Therefore, chiral recognition of molecular enantiomers becomes an important research theme. Fluorescence detection is highly sensitive and fast but has achieved only limited success in enantiomeric detection due to the lack of powerful chiral fluorescence detection materials. In this paper, a novel chiral fluorescent probe material, i.e. a chiral fluorescent nanofiber membrane, is prepared from chiral helical substituted polyacetylene by the electrospinning technique. The SEM images demonstrate the success in fabricating continuous, uniform nanofibers with a diameter of about 100 nm. Circular dichroism spectra show that the nanofibers exhibit fascinating optical activity. One of the enantiomeric chiral fluorescent membranes has chiral fluorescence recognition effects towards alanine and chiral phenylethylamine, while the other enantiomeric membrane does not. The prepared chiral fluorescent nano-materials are expected to find various applications in chirality-related fields due to their advantages such as chirality, fluorescence, and a high specific surface area. The established preparation approach also promises a potent and versatile platform for developing advanced nanofiber materials from conjugated polymers.

Linking Structure to Dynamics in Protic Ionic Liquids: A Neutron Scattering Study of Correlated and Single-Particle Motions

Coupling between dynamical heterogeneity of ionic liquids and their structural periodicity on different length-scales can be directly probed by quasielastic neutron scattering with polarization analysis. The technique provides the tools to investigate single-particle and cooperative ion motions separately and, thus, dynamics of ion associations affecting the net charge transport can be experimentally explored. The focus of this study is the structure-dynamic relationship in the protic ionic liquid, triethylammonium triflate, characterized by strong hydrogen bonds between cations and anions. The site-selective deuterium/hydrogen-isotope substitution was applied to modulate the relative contributions of different atom groups to the total coherent and incoherent scattering signal. This approach in combination with molecular dynamics simulations allowed us to obtain a sophisticated description of cation self-diffusion and confined ion pair dynamics from the incoherent spectral component by using the acidic proton as a tagged particle. The coherent contribution of the neutron spectra demonstrated substantial ion association leading to collective ion migration that preserves charge alteration on picosecond time scale, as well as correlation of the localized dynamics occurring between adjacent ions.

An in Situ Intracellular Self-Assembly Strategy for Quantitatively and Temporally Monitoring Autophagy

Autophagy plays a crucial role in the metabolic process. So far, conventional methods are incapable of rapid, precise, and real-time monitoring of autophagy in living objects. Herein, we describe an in situ intracellular self-assembly strategy for quantitative and temporal determination of autophagy in living objectives. The intelligent building blocks (DPBP) are composed by a bulky dendrimer as a carrier, a bis(pyrene) derivative (BP) as a signal molecule, and a peptide linker as a responsive unit that can be cleaved by an autophagy-specific enzyme, i.e., ATG4B. DPBP maintains the quenched fluorescence with monomeric BP. However, the responsive peptide is specifically tailored upon activation of autophagy, resulting in self-aggregation of BP residues which emit a 30-fold enhanced fluorescence. By measuring the intensity of fluorescent signal, we are able to quantitatively evaluate the autophagic level. In comparison with traditional techniques, such as TEM, Western blot, and GFP-LC3, the reliability and accuracy of this method are finally validated. We believe this in situ intracellular self-assembly strategy provides a rapid, effective, real-time, and quantitative method for monitoring autophagy in living objects, and it will be a useful tool for autophagy-related fundamental and clinical research.

NMR spectroscopy to follow reaction progress in ionic liquids

In order to understand reaction outcomes in ionic liquids, it is crucial to be able to follow the progress of these reactions. This review highlights the advantages of NMR spectroscopy over other analytical techniques in following reaction progress in ionic liquids, particularly addressing the practical aspects of the methodology and highlighting the range of processes that can be readily followed. Copyright © 2014 John Wiley & Sons, Ltd.

A naphthalimide-based fluorescent sensor for halogenated solvents

AMNis the first sensor to have the ability to differentiate CCl₄, CHCl₃, CH₂Cl₂and CHBr₃from halogenated solvents.

Hydrogen-bond acidity of ionic liquids: an extended scale

One of the main drawbacks comprising an appropriate selection of ionic liquids (ILs) for a target application is related to the lack of an extended and well-established polarity scale for these neoteric fluids. Albeit considerable progress has been made on identifying chemical structures and factors that influence the polarity of ILs, there still exists a high inconsistency in the experimental values reported by different authors. Furthermore, due to the extremely large number of possible ILs that can be synthesized, the experimental characterization of their polarity is a major limitation when envisaging the choice of an IL with a desired polarity. Therefore, it is of crucial relevance to develop correlation schemes and a priori predictive methods able to forecast the polarity of new (or not yet synthesized) fluids. In this context, and aiming at broadening the experimental polarity scale available for ILs, the solvatochromic Kamlet-Taft parameters of a broad range of bis(trifluoromethylsulfonyl)imide-([NTf2](-))-based fluids were determined. The impact of the IL cation structure on the hydrogen-bond donating ability of the fluid was comprehensively addressed. Based on the large amount of novel experimental values obtained, we then evaluated COSMO-RS, COnductor-like Screening MOdel for Real Solvents, as an alternative tool to estimate the hydrogen-bond acidity of ILs. A three-parameter model based on the cation-anion interaction energies was found to adequately describe the experimental hydrogen-bond acidity or hydrogen-bond donating ability of ILs. The proposed three-parameter model is also shown to present a predictive capacity and to provide novel molecular-level insights into the chemical structure characteristics that influence the acidity of a given IL. It is shown that although the equimolar cation-anion hydrogen-bonding energies (EHB) play the major role, the electrostatic-misfit interactions (EMF) and van der Waals forces (EvdW) also contribute, admittedly in a lower extent, towards the hydrogen-bond acidity of ILs. The new extended scale provided for the hydrogen-bond acidity of ILs is of high value for the design of new ILs for task-specific applications.

Effect of imidazolium room-temperature ionic liquids on aggregation of amphotericin B: a circular dichroism study

The aggregate–monomer equilibrium of amphotericin B could be controlled by the structure of the room-temperature ionic liquid.

Effects of ionic liquids on membrane fusion and lipid aggregation of egg-PC liposomes

In this study we have explored the effects of different groups of ionic liquids (ILs) on membrane fusion. The ILs used contain different head groups: N-methylimidazolium, 3-methylpyridinium and N-methylpyrrolidinium; short alkyl or ether functionalized side chains (with one or two ethoxy functionalities), paired with chloride anion. These ILs have been compared with 1-dodecyl-3-methylimidazolium bromide as example of a highly lipophilic IL. The effect of ILs on membrane fusion was investigated through pyrene steady state fluorescence probing, using the IE factor and excimer/monomer ratio (IE/IM) as parameters. The ratio between the vibronic bands of pyrene (I1/I3 ratio) has been used to monitor the effect of ILs on the aggregation properties of egg-PC liposomes. The effect of different ILs' families was evident; the pyridinium ILs induced a greater extent of fusion than pyrrolidinium and imidazolium ILs having the same side chain. Marginal effect could be attributed to different anions. ILs with short alkyl chains were usually more effective than ether functionalized ones. The aggregation behaviors of ILs having dioxygenated chains have been measured in buffer solution.

Synthesis and properties of l-valine based chiral long alkyl chain appended 1,2,3-triazolium ionic liquids

l-Valine based alkyl (hexyl, octyl, dodecyl, cetyl, octadecyl) chain-appended 1,2,3-triazolium ionic liquids with iodide/hexafluorophosphate anions are found to possess favourable properties.

Spectroscopic and photophysical study of the demetallation of a zinc porphyrin and the aggregation of its free base in a tetraalkylphosphonium ionic liquid

Dissolving zinc tetraphenylporphyrin in the tetraalkylphosphonium chloride ionic liquid P4448Cl results in progressive demetallation of the solute and quantitative production of the free base porphyrin.

Ultrafast solvation dynamics and charge transfer reactions in room temperature ionic liquids

In this perspective, we review the recent studies concerning the liquid structure and solvation dynamics of ionic liquids, and their influence upon electron transfer and charge transfer reactions.