A Pyrene-based Highly Selective Turn-on Fluorescent Chemosensor for Iron(III) Ions and its Application in Living Cell Imaging

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Sulfonamide functionalized silica nano-composite: characterization and fluorescence "turn-on" detection of Fe3+ ions in aqueous samples

We have synthesized novel sulfonamide-based nano-composite (SAN) for selective and sensitive detection of Fe³⁺ ions in aqueous samples. Morphological characterization of SAN was carried out with TGA, FT-IR, UV-Vis, ninhydrin assay, FE-SEM, pXRD, BET, EDX, and elemental analysis. The sensing nature, effect of pH, sensor concentration and response time analysis were accomplished with the help of emission spectral studies and SAN was assessed as "turn-on" emission detector for the biologically important Fe³⁺ ions. Here, the LOD and LOQ were computed to be 26.68 nM and 88.93 nM, respectively, and it was found to be much lower than the permissible limit of Fe³⁺ ions in drinking water. The accuracy of the sensor (SAN) was determined by testing the aqueous samples spiked with known concentrations of Fe³⁺ ions and results demonstrated 98.00-99.66% recovery, which made SAN a reliable, selective and sensitive chemosensor for the quantification of Fe³⁺ ions in fully aqueous media.

A new Fe3+-selective, sensitive, and dual-channel turn-on probe based on rhodamine carrying thiophenecarboxaldehyde: Smartphone application and imaging in living cells

A new dual-channel probe based on rhodamine B derivative (MSB) was successfully designed, synthesized, characterized by Nuclear Magnetic Resonance (NMR) Spectroscopy, Fourier Transform Infrared Spectrophotometer (FTIR), Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS), X-ray Photoelectron Spectroscopy (XPS), and Single Crystal X-rayDiffraction, and the sensing abilities toward Fe³⁺ cation have been demonstrated and the probe was successfully utilized for fluorescence imaging of Fe³⁺ in living cells. The probe demonstrated quite fast, sensitive, and selective response to Fe³⁺ by causing an extreme enhancement in UV-vis and fluorescence spectroscopy techniques in the buffered aqueous media which makes MSB a dual-channel probe. While the color of MSB solution was initially light yellow, it turned pink in the presence of Fe³⁺, which provided highly selective naked-eye determination among several ions as alkaline, alkaline-earth, and transition metal ions. After that, the probe was easily applied to paper strips and real samples such as drinking waters and supplementary iron tablets for sensing Fe³⁺ in an aqueous solution. The detection limit (LOD) and the response time of the probe were determined as 4.85x10^-9 M and 4 min, respectively, which are quite lower compared with other rhodamine based Fe³⁺ sensors in the literature. According to Job's plot, ¹H NMR titration, MALDI-TOF MS, XPS, and DFT study techniques, the complexation ratio between MSB and Fe³⁺ was found as 1:1. Moreover, the spectral response was reversible with alternately addition of Fe³⁺ or Na₂EDTA to the MSB solution. In addition, fluorescence imaging in NIH/3T3 mouse fibroblast cells and studies in real samples with a quite high recovery rate exhibited that the probe is qualified for detection of Fe³⁺ ion with multiple practical usages.

Fluorescence "Turn-off" Sensing of Iron (III) Ions Utilizing Pyrazoline Based Sensor: Experimental and Computational Study

A simple pyrazoline-based ''turn off'' fluorescent sensor 5-(4-methoxyphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4,5-dihydro-1H-pyrazole (PFM) was synthesized and well characterized by different techniques such as FT-IR, ¹H-NMR, ¹³C-NMR, and mass spectrometry. The synthesized sensor PFM was utilized for the detection of Fe³⁺ ions. Fluorescence emission selectively quenched by Fe³⁺ ions compared to other metal ions (Mn²⁺, Al³⁺, Fe²⁺, Hg²⁺, Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, and Zn²⁺) via paramagnetic fluorescence quenching and showed good anti-interference ability over the existence of other tested metals. Under optimum conditions, the fluorescence intensity of sensor quenched by Fe³⁺ in the range of 0 to 3 μM with detection limit of 0.12 μM. Binding of Fe³⁺ ions to PFM solution were studied by fluorescent titration, revealed formation of 1:1 PFM-Fe metal complex and binding constant of complex was found to be of 1.3 × 10⁵ M^-1. Further, the fluorescent sensor has been potentially used for the detection of Fe³⁺ in environmental samples (river water, tap water, and sewage waste water) with satisfactory recovery values of 99-101%.

Pyrene-Based AIE Active Materials for Bioimaging and Theranostics Applications

Aggregation-induced emission (AIE) is a unique research topic and property that can lead to a wide range of applications, including cellular imaging, theranostics, analyte quantitation and the specific detection of biologically important species. Towards the development of the AIE-active materials, many aromatic moieties composed of tetraphenylethylene, anthracene, pyrene, etc., have been developed. Among these aromatic moieties, pyrene is an aromatic hydrocarbon with a polycyclic flat structure containing four fused benzene rings to provide an unusual electron delocalization feature that is important in the AIE property. Numerous pyrene-based AIE-active materials have been reported with the AIE property towards sensing, imaging and theranostics applications. Most importantly, these AIE-active pyrene moieties exist as small molecules, Schiff bases, polymers, supramolecules, metal-organic frameworks, etc. This comprehensive review outlines utilizations of AIE-active pyrene-based materials on the imaging and theranostics studies. Moreover, the design and synthesis of these pyrene-based molecules are delivered with discussions on their future scopes.

Adenosine triphosphate (ATP) and zinc(II) ions responsive pyrene based turn-on fluorescent probe and its application in live cell imaging

A novel highly selective and sensitive turn-on fluorescent chemosensor PCE to recognize Zn²⁺ has been developed. The sensor PCE displays a remarkable fluorescent enhancement at 456 nm (λ_ex = 340 nm) with Zn²⁺ without the interference of other biologically important relevant metal ions in aqueous acetonitrile solution. Job's plot and mass spectral studies divulge such the interaction of PCE by Zn²⁺ was 1:1 binding stoichiometry. The association constant and detection limit of PCE to recognize Zn²⁺ was found to be 0.948 × 10⁴ M^-1 and 4.82 × 10^-7 M respectively. The nature of turn-on fluorescence sensor was supported by TD-DFT calculations. And the synthesized probe PCE was able to image intracellular Zn²⁺ in living cells using confocal imaging techniques. PCE-Zn ensemble showed the remarkable fluorescence enhancement with ATP selectively among other biologically important phosphates. ³¹P NMR experiments suggesting that the triphosphates unit of ATP is intact with the PCEZn. PCE-Zn ensemble can be utilized for monitoring ATP in live cells.

Pyrene-Based "Turn-Off" Probe with Broad Detection Range for Cu2+ , Pb2+ and Hg2+ Ions

Detection of metals in different environments with high selectivity and specificity is one of the prerequisites of the fight against environmental pollution with these elements. Pyrenes are well suited for the fluorescence sensing in different media. The applied sensing principle typically relies on the formation of intra- and intermolecular excimers, which is however limiting the sensitivity range due to masking of e. g. quenching effects by the excimer emission. Herein we report a highly selective, structurally rigid chemical sensor based on the monomer fluorescence of pyrene moieties bearing triazole groups. This sensor can quantitatively detect Cu2+ , Pb2+ and Hg2+ in organic solvents over a broad concentrations range, even in the presence of ubiquitous ions such as Na+ , K+ , Ca2+ and Mg2+ . The strongly emissive sensor's fluorescence with a long lifetime of 165 ns is quenched by a 1 : 1 complex formation upon addition of metal ions in acetonitrile. Upon addition of a tenfold excess of the metal ion to the sensor, agglomerates with a diameter of about 3 nm are formed. Due to complex interactions in the system, conventional linear correlations are not observed for all concentrations. Therefore, a critical comparison between the conventional Job plot interpretation, the method of Benesi-Hildebrand, and a non-linear fit is presented. The reported system enables the specific and robust sensing of medically and environmentally relevant ions in the health-relevant nM range and could be used e. g. for the monitoring of the respective ions in waste streams.

Hybrid Fluorescent Poly(silsesquioxanes) with Amide- and Triazole-Containing Side Groups for Light Harvesting and Cation Sensing

Hybrid polymers containing pyrene (Py) units bound to linear poly(silsesquioxane) (LPSQ) chains through flexible linkers containing heteroatoms (S, N, O) (LPSQ-triazole-Py and LPSQ-amide-Py) exhibit intense fluorescence emission, both in very diluted solutions (c = 10-8 mol/L) and in the solid state. The materials are thermally stable and exhibit good thin film forming abilities. Their optical and physicochemical properties were found to be strongly dependent on the structure of the side chains. Comparative studies with octahedral silsesquioxane (POSS) analogues (POSS-triazole-Py and POSS-amide-Py) emphasized the role of the specific double-strand architecture of the LPSQ backbone and distribution of side Py groups for their photo-luminescent properties. The new hybrid materials were tested as fluorescence energy donors to red-emitting dyes (Nile Red and Coumarine 6). All the silsesquioxanes studied were found to be able to transfer FL emission energy to Coumarin 6, irrespectively of their spatial structure. However, due to the differences in the wavelength range of FL emission, only LPSQ-triazole-Py were able to act as energy donors to Nile Red. The Py-grafted LPSQ may be also applied for development of soluble and highly emissive chemosensors. Their fluorescent nature was explored for the detection of Cu(II), Fe(III), Co(II), Ag(I), Hg(II), Mg(II), Ca(II), Pb(II) and Zn(II). The morphology of the side chains and hydrogen-bonding interactions influenced the sensing capacity of all the studied materials.

Recent Advances on Iron(III) Selective Fluorescent Probes with Possible Applications in Bioimaging

Iron(III) is well-known to play a vital role in a variety of metabolic processes in almost all living systems, including the human body. However, the excess or deficiency of Fe3+ from the normal permissible limit can cause serious health problems. Therefore, novel analytical methods are developed for the simple, direct, and cost-effective monitoring of Fe3+ concentration in various environmental and biological samples. Because of the high selectivity and sensitivity, fast response time, and simplicity, the fluorescent-based molecular probes have been developed extensively in the past few decades to detect Fe3+. This review was narrated to summarize the Fe3+-selective fluorescent probes that show fluorescence enhancement (turn-on) and ratiometric response. The Fe3+ sensing ability, mechanisms along with the analytical novelties of recently reported 77 fluorescent probes are discussed.

Multifunctional peptide-based fluorescent chemosensor for detection of Hg2+ , Cu2+ and S2- ions

A novel multifunctional fluorescent peptide sensor based on pentapeptide dansyl-Gly-His-Gly-Gly-Trp-COOH (D-P5) was designed and synthesized efficiently using Fmoc solid-phase peptide synthesis (SPPS). This fluorescent peptide sensor shows selective and sensitive responses to Hg²⁺ and Cu²⁺ among 17 metal ions and six anions studied in N-2-hydroxyethylpiperazine-N-2-ethane sulfonic acid (HEPES) buffer solution. The peptide probe differentiates Hg²⁺ and Cu²⁺ ions by a 'turn-on' response to Hg²⁺ and a 'turn-off' response to Cu²⁺ . Upon addition of Hg²⁺ or Cu²⁺ ions, the sensor displayed an apparent color change that was visible under an ultraviolet lamp to the naked eye. The limits of detection (LOD) of DP-5 were 25.0 nM for Hg²⁺ and 85.0 nM for Cu²⁺ ; the detection limits for Cu²⁺ were much lower than the drinking water maximum contaminant levels set out by the United States Environmental Protection Agency (USEPA). It is noteworthy that both D-P5-Hg and D-P5-Cu systems were also used to detect S^2- successfully based on the formation of ternary complexes. The LODs of D-P5-Hg and D-P5-Cu systems for S^2- were 217.0 nM and 380.0 nM, respectively. Furthermore, the binding stoichiometry, binding affinity and pH sensitivity of the probe for Hg²⁺ and Cu²⁺ were investigated. This study gives new possibilities for using a short fluorescent peptide sensor for multifunctional detection, especially for anions.

Pyrene-Phosphonate Conjugate: Aggregation-Induced Enhanced Emission, and Selective Fe3+ Ions Sensing Properties

A new pyrene-phosphonate colorimetric receptor 1 has been designed and synthesized in a one-step process via amide bond formation between pyrene butyric acid chloride and phosphonate-appended aniline. The pyrene-phosphonate receptor 1 showed aggregation-induced enhanced emission (AIEE) properties in water/acetonitrile (ACN) solutions. Dynamic light scattering (DLS) characterization revealed that the aggregates of receptor 1 at 80% water fraction have an average size of ≈142 nm. Field emission scanning electron microscopy (FE-SEM) analysis confirmed the formation of spherical aggregates upon solvent evaporation. The sensing properties of receptor 1 were investigated by UV-vis, fluorescence emission spectroscopy, and other optical methods. Among the tested metal ions, receptor 1 is capable of recognizing the Fe³⁺ ion selectively. The changes in spectral measurements were explained on the basis of complex formation. The composition of receptor 1 and Fe³⁺ ions was determined by using Job's plot and found to be 1:1. The receptor 1-Fe³⁺ complex showed a reversible UV-vis response in the presence of EDTA.

Molecular characteristics of a fluorescent chemosensor for the recognition of ferric ion based on photoresponsive azobenzene derivative

Metal ion recognition is of great significance in biological and environmental detection. So far, there is very few research related to the ferric ion sensing based on photoresponsive azobenzene derivatives. In this work, we report a highly selective fluorescent "turn-off" sensor for Fe³⁺ ions and the molecular sensing characteristics based on an azobenzene derivative, N-(3,4,5-octanoxyphenyl)-N'-4-[(4-hydroxyphenyl)azophenyl]1,3,4-oxadiazole (AOB-t8). The binding association constant was determined to be 6.07×10³M^-1 in ethanol and the stoichiometry ratio of 2:2 was obtained from Job's plot and MS spectra. The AOB-t8 might be likely to form the dimer structure through the chelation of ferric ion with the azobenzene moiety. Meanwhile, it was found that the photoisomerization property of AOB-t8 was regulated by the binding with Fe³⁺. With the chelation of Fe³⁺, the regulated molecular rigidity and the perturbed of electronic state and molecular geometry was suggested to be responsible for the accelerated isomerization of AOB-t8 to UV irradiation and the increased fluorescence lifetime of both trans- and cis-AOB-t8-Fe(III). Moreover, the reversible sensing of AOB-t8 was successfully observed by releasing the iron ion from AOB-t8-Fe(III) with the addition of citric acid.

Highly Selective and Sensitive Detection of Nitroaromatic Compounds and Metal Ions by Supramolecular Assemblies of 3,3',5,5'-Azobenzenetetracarboxylic Acid and 4,4'-Bipyridine

A supramolecular compound, (H₄L)(4,4'-bpy)₂ (1) (H₄L = 1,2-bis(3,5-dicarboxyphenyl)diazene oxide, 4,4'-bpy = 4,4'-bipyridine) with 2D + 2D → 2D 3-fold parallel interpenetrated layer feature, has been prepared which was investigated as selective sensing material for detection of nitroaromatic compounds (NACs) and metal ions, and exhibits significant fluorescence quenching toward NACs and high selectivity for detection of Fe³⁺ ion. The result indicates that 1 is a promising multi-functional fluorescence probe for detecting and recognizing NACs and metal ions with high sensitivity and selectivity.

Highly selective and sensitive detection of metal ions and nitroaromatic compounds by an anionic europium(iii) coordination polymer

A luminescent Eu(iii)-based coordination polymer has been synthesized, which can serve as a visual selective sensor for the detection of 4-nitrophenol and Fe³⁺ ions via a fluorescence quenching mechanism.

Optical sensor: a promising strategy for environmental and biomedical monitoring of ionic species

In this review, we cover the recent developments in fluorogenic and chromogenic sensors for Cu²⁺, Fe²⁺/Fe³⁺, Zn²⁺and Hg²⁺.

Selectively sensing first-row transition metal ions through fluorescence enhancement

Fluorescence signaling systems that give enhancement in the presence of first-row transition metal ions are discussed.

Highly selective and sensitive receptor for Fe3+ probing

A new fluorescent receptor 1,1'-(4-methylbenzene-1,3-diyl)bis[3-(2-sulfanylphenyl)urea] (1) has been designed and synthesized. The receptor showed excellent selectivity for Fe(3+) in DMSO/H2O (8:2, v/v) solvent system over other commonly coexistent metal ions. The binding constant (Ka) of receptor with Fe(3+) was calculated to be 11,250 M(-1), 12,970 M(-1) and 12,970 M(-1) using Benesi-Hildebrand, Scatchard and Connor plot, respectively. The experimental results have been further supported by the detailed DFT calculations.