Ultrasound-Assisted Synthesis of Chalcone: A Highly Sensitive and Selective Fluorescent Chemosensor for the Detection of Fe3+ in Aqueous Media

Flavonol derivatives containing piperazine and quinoxaline fragments: synthesis and antifungal activity

A series of flavonol derivatives containing piperazine and quinoxaline had been designed and synthesized. The biological activity test results showed that some of the target compounds had good antifungal activity against various fungi. N5 had the best antifungal activity against Phomopsis sp (P.s.) and Phytophthora capsica (P.c.). The half maximal effective concentration (EC50) was 12.9 and 25.8 μg/mL against P.s. and P.c., respectively, which were better than azoxystrobin (Az, 25.4 and 71.1 μg/mL). In addition, the protective and curative activities of N5 against kiwifruit were 85.9 and 67.0% at 200 μg/mL in vivo, which were better than that of Az (65.9 and 57.0%). The protective and curative activities against chili leaves were 80.6 and 66.5% at 200 μg/mL, which were better than that of Az (77.6 and 60.0%). The scanning electron microscopy (SEM) experiment showed that the action of N5 caused the mycelium to bend and fold, changed its morphology and caused damaged to the mycelium. Through the measurement of relative conductivity, leakage of cytoplasmic contents and determination of malondialdehyde (MDA) content indicated that N5 could damage the integrity of pathogenic fungal cell membranes, change the permeability of cell membranes, and affect the normal growth of mycelium.

Multi-Step Synthesis, Characterization and Physicochemical Investigation of Benzylated Indole Thiosemicarbazone as Selective Switch on Sensing Properties for Copper Ion

A selective and specific Fluorescent chemosenor benzyl-indole-based thiosemicarbazone (BMP), was synthesized via the condensation between benzylated indole and phenylthiosemicarbazide as depicted in (Scheme 3). The compound BMP structure was confirmed by Mass spectrometry, IR, and 1H-NMR and 13C-NMR spectral techniques. The solvent interaction between BMP and various solvents were investigated by UV-vis and fluorescence titration studies, revealing a bathochromic shift (red shift) in the absorption and emission spectra, because of solvent polarity dependency. The selectivity and specificity of BMP for the identification of Cu (II) ion was examined by fluorescence spectrometry titration. The results demonstrated that upon the addition of 0.5 × 10-2 M of aqueous Cu2+ ions solution to the 0.1 × 10-3 M of BMP in acetonitrile, a noticeable enhancing of fluorescence was observed. The fluorescence enhancing mechanism was analyzed using various photophysical approaches, including spectroscopic titration, Benesi-Hildebrand analysis, Job's plot graph, and confirming a 1:1 stoichiometry ratio between BMP and Cu2+ ions. The association constant (Ka) of BMP for Cu2+ ions was determined to be 1.83 × 104 M-1.

Synthesis of Fluorescent Pyrazoline Sensors as Versatile Tool for Zinc ion Detection: A Mini-Review

Zinc ions are one of the 2nd most abundant mineral after iron and it is important for immune system, enzymatic catalysis, DNA synthesis, and maintaining structural integrity in humans. But, monitoring the Zn levels in human body poses more challenges. This review paper investigates (paper from 2010 to 2023) the synthesis of pyrazoline derivatives by different methods, including conventional methods and green chemistry protocol. These Pyrazoline derivatives highlighted for their potential application as chemo-sensor for Zn2+ ions recognition. Pyrazoline compounds exhibit excellent sensitivity & selectivity and emitting blue-light with high quantum yields and electroluminescence, along with a superior limit of detection. These derivatives are stable bioactive molecule, with well-known diverse biological activities. This review not only gives valuable insights into the essential role of Zinc in human physiology but also provides a practical method for accurate Zinc detection in various samples. Which holds the potential for advancements in health diagnostics and environmental monitoring. Because of their significant biological application and selectivity as sensors, researchers have much more attention to prepare green environmentally-friendly pyrazoline derivatives.

Synthesis, Physicochemical and Third Order Nonlinear Optical Properties of Bis-Chalcone (BBDP) as Donor-pi Acceptor Chromophore in Organize Medium

Bis-Chalcone (BBDP) has been prepared by condensation of N, N-dimethyl benzaldehyde and 1,1'-([1,1'-biphenyl]-4,4'-diyl) di (ethan-1-one), and structure of BBDP was characterized by Mass Spectra, 13C-NMR, 1H-NMR, and IR. Physicochemical properties including Dipole-moments, Stoke-Shifts, Oscillator-strength, dielectric constant and quantum-yields of fluorescence of BBDP were investigated by the emission and absorbances in different solvents. Compound (BBDP) displayed bathochromic shift upon increasing the solvent polarity (from n-Hexane to DMSO). Furthermore, we have exploited third-order nonlinear optical characteristics of the bisChalone were invigilated by the Z-scan techniques in Chloroform. The measurements were taken with a continuous-wave (CW) diode laser having a wavelength of 520 nm in CHCl3 solvent. The third-order nonlinear optical properties, such as the nonlinear refractive index (NLRI) n2, nonlinear absorption coefficient (NLAC) β, and nonlinear susceptibility χ(3), were measured at various solution concentrations and laser powers. The obtained values of n2, β, and χ(3) were estimated to be high, of the order of 10-7(cm2/W), 10-3 (cm/W), and 10-6 (esu), respectively. As a result, bis-chalcone (BBDP) is considered as a promising candidate for applications in nonlinear optical (NLO) devices and optical limiting (OL).

Synthesis and applications of luminescent metal organic frameworks (MOFs) for sensing dipicolinic acid in biological and water samples: a review

The detection of trace quantities of 2,6-dipicolinic acid (DPA) in real-world samples is crucial for early disease diagnosis and routine health monitoring. Metal-organic frameworks (MOFs), recognized for their diverse structural architectures, have emerged as advanced multifunctional hybrid materials. One of the most notable properties of MOFs is their luminescence (L), which can arise from structural ligands, guest molecules, and emissive metal ions. Luminescent MOFs have shown significant promise as platforms for sensor design. This review highlights the application of luminescent MOFs in the detection of DPA in biological and aqueous environments. It provides a comprehensive discussion of the various detection strategies employed in luminescent MOF-based DPA sensors. Additionally, it explores the origins of L in MOFs, their synthesis, and the mechanisms underlying their sensing capabilities. The article also addresses key challenges and limitations in this field, offering practical insights for the development of efficient luminescent MOFs for DPA detection.

Fluorescence sensing of metal ions in solution using a morpholine-containing phenolic Mannich base of 1'-hydroxy-2'-acetonaphthone

A phenolic Mannich base derived from 1'-hydroxy-2'-acetonaphthone (HAN) as a substrate and morpholine as an amine reagent was synthesized and structurally characterized. The sensing ability toward various metal ions of the s-, p- and d-block of this molecule that has the binding site for metal ions in the starting ortho-hydroxyphenone preserved was examined. Interaction between this phenolic Mannich base and Al3+, Cr3+, Cu2+ and Co2+ leads to modifications of the sensing molecule's absorption spectrum. Fluorescence spectroscopy showed that Al3+ acts as a fluorescence enhancer, whereas Cu2+ functions as a fluorescence quencher for the aminomethylated derivative. The phenolic Mannich base may be employed either as a sensitive "turn-on" chemosensor for Al3+ or as a sensitive "turn-off" chemosensor for Cu2+. However, in the presence of these ions at identical concentrations, the Mannich base becomes a selective chemosensor for Al3+. The sensing ability of this phenolic Mannich base toward rare earth ions showed that Eu3+, Dy3+ and Gd3+ induce changes in the absorption spectrum of the Mannich base. Fluorescence spectroscopy showed that the response of the sensing molecule toward Eu3+ and Dy3+ is weak, and this phenolic Mannich base may be used as a "turn-off" chemosensor for these two lanthanide ions only in a narrow concentration range (1-16 × 10-5 M).

Green One-Pot Synthesis of Thiazole Scaffolds Catalyzed by Reusable NiFe2O4 Nanoparticles: In Silico Binding Affinity and In Vitro Anticancer Activity Studies

A facile, green, one-pot multicomponent synthesis strategy was employed to fabricate novel thiazole scaffolds incorporating phthalazine, pyridazine, and pyrido-pyridazine derivatives (4a-4o). This synthetic route entailed the reaction of an α-halo carbonyl compound (1) with thiosemicarbazide (2) and various anhydrides (3a-3o), utilizing NiFe2O4 nanoparticles as a reusable catalyst in an ethanol:water (1:1) solvent system. The cytotoxicity of the synthesized compounds was meticulously assessed against three cancer cell lines, A375, HeLa, and MCF-7, employing IC50 values (μM) as the benchmark, and compared to the reference drug erlotinib. Compound 4n displayed remarkable efficacy against A375 (0.87 ± 0.31 μM), HeLa (1.38 ± 1.24 μM), and MCF-7 (1.13 ± 0.96 μM) cell lines, significantly surpassing erlotinib's IC50 values. Additionally, compounds 4k, 4l, 4m, and 4o demonstrated notable cytotoxicity across all tested cell lines, indicating their potential as effective anticancer agents. In silico docking studies against Hsp82 and Hsp90 proteins indicated that ligands 4k, 4m, 4c, 4j, 4o, and 4l had superior binding affinities compared to erlotinib. ADME analysis showed that compounds 4n, 4j, 4l, 4m, and 4o had favorable pharmacokinetic profiles, including nontoxicity, high human intestinal absorption, and low CYP inhibitory promiscuity. Structure-activity relationship analysis revealed that cyano and benzylidene substitutions significantly enhanced anticancer activity. Overall, the synthesized compounds, particularly 4n, demonstrated high efficacy, favorable binding interactions, and promising pharmacokinetic profiles, making them strong candidates for further development as anticancer agents.

A selective bis-thiophene chalcone-based spectrofluorimetric sensor for Fe3

A highly selective bis thiophene-based chalcone as a chemosensor for detecting Fe3+ metal ions in DMF: H2O (9:1). This sensor was selective toward ferric ions over other metal ions with a detection limit in micromolar range.

A selective and sensitive probes of chalcone derivative as a fluorescent chemosensor for the detection of Cr3+ ion

A new chalcone based chemosensor like 6-cinnamoylthiochroman-4-one (AZAN), has been designed and synthesized from 6-chlorothiochroman-4-one and cinnamaldehyde via keto ethylenic linkage. Its amino derivatives were synthesized by using urea (AZANU), thiourea (AZANTU) and 2,6-diamino pyridine (AZANPy) respectively and its metal ion sensing properties were investigated. The sensors can selectively recognize and sense the metal cations by showing different fluorescent characteristics at different concentrations. The fluorescence intensity shows remarkable enhancement by Cr3+ over other common metal ions (Cd2+, Hg2+ and Pb2+). The proposed mechanism can be confirmed by UV-Vis and emission titration. The newly synthesized receptor can sense the metal ions even in nano molar level. The binding or association constant and detection limit of chemosensor to Cr3+ are 1.684 × 105 M-1 and 0.2245 × 10-9 M respectively. A computation using the density functional theory was done to gain detailed insights into the electronic structures of the ligand and its derivatives. B3LYP function and 6-31G(d,p) basis set were used to optimize the ground-state geometry of the chemical and its derivatives.

A Ratiometric Fluorescent Sensor Based on Chelation-Enhanced Fluorescence of Carbon Dots for Zinc Ion Detection

Zinc ion, one of the most important transition metal ions in living organisms, plays a crucial role in the homeostasis of the organism. The disorder of zinc is associated with many major diseases. It is highly desirable to develop selective and sensitive methods for the real-time detection of zinc ions. In this work, double-emitting fluorescent carbon dots (CDs) are prepared by a solvothermal method using glutathione, L-aspartic acid, and formamide as the raw materials. The carbon dots specifically recognize zine ions and produce a decrease in fluorescence intensity at 684 nm and an increase at 649 nm, leading to a ratiometric fluorescent sensor for zinc detection. Through surface modification and spectral analysis, the surface groups including carboxyl, carbonyl, hydroxyl, and amino groups, and C=N in heterocycles of CDs are revealed to synergistically coordinate Zn2+, inducing the structural changes in the emission site. The CDs can afford a low limit of detection of ~5 nM for Zn2+ detection with good linearity in the range of 0.02-5 μM, showing good selectivity as well. The results from real samples including fetal bovine serum, milk powder, and zinc gluconate oral solution indicated the good applicability of the CDs in the determination of Zn2+.

A pH-Sensitive Fluorescent Chemosensor Turn-On Based in a Salen Iron (III) Complex: Synthesis, Photophysical Properties, and Live-Cell Imaging Application

pH regulation is essential to allow normal cell function, and their imbalance is associated with different pathologic situations, including cancer. In this study, we present the synthesis of 2-(((2-aminoethyl)imino)methyl)phenol (HL1) and the iron (III) complex (Fe(L1)2Br, (C1)), confirmed by X-ray diffraction analysis. The absorption and emission properties of complex C1 were assessed in the presence and absence of different physiologically relevant analytes, finding a fluorescent turn-on when OH- was added. So, we determined the limit of detection (LOD = 3.97 × 10-9 M), stoichiometry (1:1), and association constant (Kas = 5.86 × 103 M-1). Using DFT calculations, we proposed a spontaneous decomposition mechanism for C1. After characterization, complex C1 was evaluated as an intracellular pH chemosensor on the human primary gastric adenocarcinoma (AGS) and non-tumoral gastric epithelia (GES-1) cell lines, finding fluorescent signal activation in the latter when compared to AGS cells due to the lower intracellular pH of AGS cells caused by the increased metabolic rate. However, when complex C1 was used on metastatic cancer cell lines (MKN-45 and MKN-74), a fluorescent turn-on was observed in both cell lines because the intracellular lactate amount increased. Our results could provide insights about the application of complex C1 as a metabolic probe to be used in cancer cell imaging.