Conventional and Current Methods of Toxic Metals Removal from Water Using g-C3N4-Based Materials

Protein Precipitation by Metal Hydroxides as a Convenient and Alternative Sample Preparation Procedure for Bioanalysis

Protein precipitation is widely used for sample preparation ahead of liquid chromatography. This step is required to analyze small molecules without the interference of proteins contained in the matrix. Organic solvents and acidic chemicals are the two most popular reagents used for this scope. Organic solvents are quite effective precipitating agents, but require a medium-to-large sample dilution. Moreover, a high concentration of organic solvents in sample media can affect reversed phase separations. Therefore, an evaporation step, followed by the resuspension of the analytes in appropriate media, is sometimes required. On the contrary, the addition of acidic compounds is more straightforward, since it keeps the supernatant aqueous and does not require evaporation, but the extreme pH can cause the degradation of analytes and the stationary phase. Herein, an alternative method for protein precipitation using the addition of zinc hydroxide was tested. The main advantages of this method over the other precipitating reagents are the minimal sample dilution required and the maintenance of aqueous media at nearly neutral pH which ensure analyte stability. The protocol ensured an effective protein removal before the analysis of small molecules in biological matrices, resulting in full compatibility with reversed phase chromatography coupled with both UV and mass spectrometric detectors.

Animal waste as a valuable biosorbent in the removal of heavy metals from aquatic ecosystem-an eco-friendly approach

Toxic pollutants in the form of heavy metals are added through various anthropogenic activities daily into the aquatic ecosystem beyond their permissible limits, and their bioaccumulation capacity makes them hazardous substances for the survival of all organisms. Thus, their removal from aquatic ecosystems is the need of the hour. Treatment of wastewater containing heavy metals through biosorption is gaining popularity and is being explored all around the world due to its various advantages over conventional methods of treatment. Utilization of animal waste as a biomaterial could be the best solution to remove it from the ecosystem. Such treatment methods are a blessing for developing and underdeveloped countries due to their low cost. This paper provides in-depth details about heavy metals, their health implications, mechanisms of toxicity, modes of transportation, and conventional treatment approaches. A comprehensive understanding of the biosorption process, encompassing its world scenario, evolution, mechanisms, factors affecting the process, and advantages, will also be covered. Finally, animal wastes and their applicability in the removal of heavy metal pollutants from wastewater shall also be thoroughly reviewed, followed by their future utility and recommendations.

Root Exposure of Graphitic Carbon Nitride (g-C3N4) Modulates Metabolite Profile and Endophytic Bacterial Community to Alleviate Cadmium- and Arsenate-Induced Phytotoxicity to Rice (Oryza sativa L.)

To investigate the mechanisms by which g-C3N4 alleviates metal(loid)-induced phytotoxicity, rice seedlings were exposed to 100 and 250 mg/kg graphitic carbon nitride (g-C3N4) with or without coexposure to 10 mg/kg Cd and 50 mg/kg As for 30 days. Treatment with 250 mg/kg g-C3N4 significantly increased shoot and root fresh weight by 22.4-29.9%, reduced Cd and As accumulations in rice tissues by 20.6-26.6%, and elevated the content of essential nutrients (e.g., K, S, Mg, Cu, and Zn) compared to untreated controls. High-throughput sequencing showed that g-C3N4 treatment increased the proportion of plant-growth-promoting endophytic bacteria, including Streptomyces, Saccharimonadales, and Thermosporothrix, by 0.5-3.30-fold; these groups are known to be important to plant nutrient assimilation, as well as metal(loid) resistance and bioremediation. In addition, the population of Deinococcus was decreased by 72.3%; this genus is known to induce biotransformation As(V) to As(III). Metabolomics analyses highlighted differentially expressed metabolites (DEMs) involved in the metabolism of tyrosine metabolism, pyrimidines, and purines, as well as phenylpropanoid biosynthesis related to Cd/As-induced phytotoxicity. In the phenylpropanoid biosynthesis pathway, the increased expression of 4-coumarate (1.13-fold) and sinapyl alcohol (1.26-fold) triggered by g-C3N4 coexposure with Cd or As played a critical role in promoting plant growth and enhancing rice resistance against metal(loid) stresses. Our findings demonstrate the potential of g-C3N4 to enhance plant growth and minimize the Cd/As-induced toxicity in rice and provide a promising nanoenabled strategy for remediating heavy metal(loid)-contaminated soil.

Bioaccumulation for heavy metal removal: a review

This paper reviews plants and microorganisms removal of heavy metals from contaminated sites through bioaccumulation. Increased industrial activities have led to the uncontrolled release of metals into the environment, resulting in a global increase in metal pollution. Heavy metals are also consumed from the surface of glasses over a prolonged period of use. Heavy metal pollution is a serious problem that can have wide-ranging and long-lasting impacts on human health and the environment. Therefore, effective removal and remediation of heavy metal pollution are crucial to protect human and ecological health. Traditional methods of heavy metal removal, such as chemical treatment and physical removal, can be costly and can also have negative impacts on the environment. The utilization of plants and microorganisms for bioremediation of metal-polluted environments has proven effective for removing metals through accumulation and/or detoxification. This method is effective, economical, versatile, and environmentally friendly. Bioaccumulation utilizes plants and microorganisms to absorb and remove heavy metals from contaminated sites. This method is not only cost-effective but also helps to minimize the environmental impact of heavy metal pollution. Additionally, bioaccumulation can be used in combination with other techniques, such as phytostabilization and phytodegradation, to further improve the efficiency of heavy metal removal. The paper also discusses the use of plants and microorganisms in the removal of heavy metals from water and soil through biomagnification and bioconcentration. Techniques such as phytoaccumulation, phytostimulation, phytodegradation, phytovolatilization, phytostabilization, and phytofiltration are also discussed as effective ways of remediation of heavy metal contaminated sites.

Exploring the synthetic potential of a g-C3N4·SO3H ionic liquid catalyst for one-pot synthesis of 1,1-dihomoarylmethane scaffolds via Knoevenagel-Michael reaction

A highly promising approach for the synthesis of functionalized 1,1-dihomoarylmethane scaffolds (bis-dimedones, bis-cyclohexanediones, bis-pyrazoles, and bis-coumarins) using g-C₃N₄·SO₃H ionic liquid via Knoevenagel-Michael reaction has been developed and the synthesized derivatives were well characterized using spectral studies. The method involved the reaction of C-H activated acids with a range of aromatic aldehydes, in a 2 : 1 ratio catalyzed by a g-C₃N₄·SO₃H ionic liquid catalyst. The use of g-C₃N₄·SO₃H as a catalyst has several benefits, such as low cost, easy preparation, and high stability. It was synthesized from urea powder and chloro-sulfonic acid and was thoroughly characterized using FT-IR, XRD, SEM, and HRTEM. The present work unveils a promising and environmentally friendly method for synthesizing 1,1-dihomoarylmethane scaffolds with high yield, selectivity, and efficiency, using mild reaction conditions, no need for chromatographic separation, and short reaction times. The approach adheres to green chemistry principles and offers a viable alternative to the previously reported methods.

Impacts of Binary Oxide Nanoparticles on the Soybean Plant and Its Rhizosphere, Associated Phytohormones, and Enzymes

The utilization of binary oxide nanoparticles is geometrically increasing due to their numerous applications. Their intentional or accidental release after usage has led to their omnipresence in the environment. The usage of sludge or fertilizer containing binary oxide nanoparticles is likely to increase the chance of the plants being exposed to these binary oxide nanoparticles. The aim of the present review is to assess the detailed positive and negative impacts of these oxide nanoparticles on the soybean plants and its rhizosphere. In this study, methods of synthesizing binary oxide nanoparticles, as well as the merits and demerits of these methods, are discussed. Furthermore, various methods of characterizing the binary oxide nanoparticles in the tissues of soybean are highlighted. These characterization techniques help to track the nanoparticles inside the soybean plant. In addition, the assessment of rhizosphere microbial communities of soybean that have been exposed to these binary oxide nanoparticles is discussed. The impacts of binary oxide nanoparticles on the leaf, stem, root, seeds, and rhizosphere of soybean plant are comprehensively discussed. The impacts of binary oxides on the bioactive compounds such as phytohormones are also highlighted. Overall, it was observed that the impacts of the oxide nanoparticles on the soybean, rhizosphere, and bioactive compounds were dose-dependent. Lastly, the way forward on research involving the interactions of binary oxide nanoparticles and soybean plants is suggested.

Efficient Mesoporous MgO/g-C3N4 for Heavy Metal Uptake: Modeling Process and Adsorption Mechanism

Removing toxic metal ions arising from contaminated wastewaters caused by industrial effluents with a cost-effective method tackles a serious concern worldwide. The adsorption process onto metal oxide and carbon-based materials offers one of the most efficient technologies adopted for metal ion removal. In this study, mesoporous MgO/g-C₃N₄ sorbent is fabricated by ultrasonication method for the uptake Pb (II) and Cd (II) heavy metal ions from an aqueous solution. The optimum conditions for maximum uptake: initial concentration of metal ions 250 mg g^-1, pH = 5 and pH = 3 for Pb⁺⁺ and Cd⁺⁺, and a 60 mg dose of adsorbent. In less than 50 min, the equilibrium is reached with a good adsorption capacity of 114 and 90 mg g^-1 corresponding to Pb⁺⁺ and Cd⁺⁺, respectively. Moreover, the adsorption isotherm models fit well with the Langmuir isotherm, while the kinetics model fitting study manifest a perfect fit with the pseudo-second order. The as fabricated mesoporous MgO/g-C₃N₄ sorbent exhibit excellent Pb⁺⁺ and Cd⁺⁺ ions uptake and can be utilized as a potential adsorbent in wastewater purification.

Hybridizing electron-mediated H5PMo10V2O40 with CdS/g-C3N4 for efficient photocatalytic performance of Z-scheme heterojunction in wastewater treatment

Photocatalytic technology has been considered as a promising method to alleviate environmental pollution owing to the dual characteristics of redox. The novel V-based H₅PMo₁₀V₂O₄₀ (HPA-2) photocatalyst with Z-scheme heterostructure was constructed. The energy level of HPA-2 matches well with CdS and g-C₃N₄ (CN) according to Mott-Schottky and UV-Vis diffused reflectance tests, which allows the efficient separation of photogenerated electrons. The optimized CdS/HPA-2/CN showed superior ability in Rhodamine B (RhB) degradation and reduction of Cr (Ⅵ) under visible light irradiation. The maximum rate constant reached 0.092 min^-1 for RhB degradation at 60 min and 0.260 min^-1 for Cr (Ⅵ) reduction at 20 min, respectively. The photocatalytic mechanism was analyzed by adding scavengers. The effect of active species for RhB degradation was determined as h⁺ > ·O₂^- > ·OH, while ·O₂^- and e^- were essential for the reduction of Cr (Ⅵ). Besides, cyclic tests exhibit excellent repeatability and stable structure of CdS/HPA-2/CN after four cycles. Meanwhile, the detailed degradation process of RhB involving de-ethylation, hydroxylation, substitution and decarboxylation was determined according to LC-MS and evaluated by Fukui function calculation. Furthermore, total organic carbon content decreased to 6.2% of the initial value. In this work, as an electron mediator, HPA-2 provides the inspiration for construction of Z-scheme heterojunction, and CdS/HPA-2/CN exhibits enormous potential in the environmental remediation by photocatalysis.

Photocatalytic Reduction of Hexavalent Chromium Using Cu3.21Bi4.79S9/g-C3N4 Nanocomposite

The photocatalytic reduction of hexavalent chromium, Cr(VI), to the trivalent species, Cr(III), has continued to inspire the synthesis of novel photocatalysts that are capable of achieving the task of converting Cr(VI) to the less toxic and more useful species. In this study, a novel functionalized graphitic carbon nitride (Cu3.21Bi4.79S9/gC3N4) was synthesized and characterized by using X-ray diffraction (XRD), thermogravimetry analysis (TGA), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), and scanning electron microscope (SEM). The composite was used for the photocatalytic reduction of hexavalent chromium, Cr(VI), under visible light irradiation. A 92.77% efficiency of the reduction was achieved at pH 2, using about 10 mg of the photocatalyst and 10 mg/L of the Cr(VI) solution. A pseudo-first-order kinetic study indicated 0.0076 min−1, 0.0286 min−1, and 0.0393 min−1 rate constants for the nanoparticles, pristine gC3N4, and the nanocomposite, respectively. This indicated an enhancement in the rate of reduction by the functionalized gC3N4 by 1.37- and 5.17-fold compared to the pristine gC3N4 and Cu3.21Bi4.79S9, respectively. A study of how the presence of other contaminants including dye (bisphenol A) and heavy-metal ions (Ag(I) and Pb(II)) in the system affects the photocatalytic process showed a reduction in the rate from 0.0393 min−1 to 0.0019 min−1 and 0.0039 min−1, respectively. Finally, the radical scavenging experiments showed that the main active species for the photocatalytic reduction of Cr(VI) are electrons (e−), hydroxyl radicals (·OH−), and superoxide (·O2−). This study shows the potential of functionalized gC3N4 as sustainable materials in the removal of hexavalent Cr from an aqueous solution.

Photocatalytic membrane reactors for produced water treatment and reuse: Fundamentals, affecting factors, rational design, and evaluation metrics

Treatment and reuse of produced water (PW), the largest wastewater stream generated during oil and gas production, provides a promising option to address the increasing clean water demands. High-performance treatment technologies are needed to efficiently remove the organic and inorganic contaminants in PW for fit-for-purpose applications. Photocatalytic membrane reactor (PMR) is an emerging green technology for removal of organic pollutants, photoreduction of heavy metals, photo-inactivation of bacteria, and resource recovery. This study critically reviewed the mechanisms of photocatalysis and membrane processes in PMR, factors affecting PMR performance, rational design, and evaluation metrics for PW treatment. Specifically, PW characteristics, photocatalysts properties, membranes applied, and operating conditions are of utmost importance for rational design and reliable operation of PMR. PW pretreatment to remove oil and grease, colloidal and suspended solids is necessary to reduce membrane fouling and ensure optimal PMR performance. The metrics to evaluate PMR performance were developed including light utilization, exergetic efficiency, water recovery, product water improvement, lifetime of the photocatalyst, and costs. This review also presented the research gaps and outlook for future research.