Solubility of Nonsteroidal Anti-inflammatory Drugs (NSAIDs) in Aqueous Solutions of Non-ionic Surfactants

An Overview of Nanoemulgels for Bioavailability Enhancement in Inflammatory Conditions via Topical Delivery

The anti-inflammatory drugs that are generally available possess the disadvantage of hydrophobicity, which leads to poor permeability and erratic bioavailability. Nanoemulgels (NEGs) are novel drug delivery systems that aim to improve the solubility and permeability of drugs across the biological membrane. The nano-sized droplets in the nanoemulsion enhance the permeation of the formulation, along with surfactants and co-surfactants that act as permeation enhancers and can further improve permeability. The hydrogel component of NEG helps to increase the viscosity and spreadability of the formulation, making it ideal for topical application. Moreover, oils that have anti-inflammatory properties, such as eucalyptus oil, emu oil and clove oil, are used as oil phases in the preparation of the nanoemulsion, which shows a synergistic effect with active moiety and enhances its overall therapeutic profile. This leads to the creation of hydrophobic drugs that possess enhanced pharmacokinetic and pharmacodynamic properties, and simultaneously avoid systemic side effects in individuals with external inflammatory disorders. The nanoemulsion's effective spreadability, ease of application, non-invasive administration, and subsequent ability to achieve patient compliance make it more suitable for topical application in the combat of many inflammatory disorders, such as dermatitis, psoriasis, rheumatoid arthritis, osteoarthritis and so on. Although the large-scale practical application of NEG is limited due to problems regarding its scalability and thermodynamic instability, which arise from the use of high-energy approaches during the production of the nanoemulsion, these can be resolved by the advancement of an alternative nanoemulsification technique. Considering the potential advantages and long-term benefits of NEGs, the authors of this paper have compiled a review that elaborates the potential significance of utilizing nanoemulgels in a topical delivery system for anti-inflammatory drugs.

Influence of Hydrophobic and Hydrophilic Chain Length of CiEj Surfactants on the Solubilization of Active Pharmaceutical Ingredients

Up to 90% of all newly developed active pharmaceutical ingredients (APIs) are poorly water soluble, most likely also showing a low oral bioavailability. In order to increase the aqueous solubility of these APIs, surfactants are promising excipients to increase both solubility and consequently bioavailability (e.g., in lipid- and surfactant-based drug delivery systems). In this work, we investigated the influence of hydrophobic and hydrophilic chain lengths of C_iE_j surfactants (C₈E₆, C₁₀E₆, and C₁₀E₈) toward the solubilization of fenofibrate, naproxen, and lidocaine. Furthermore, we investigated the partitioning of these APIs between the surfactant aggregates and the surrounding aqueous bulk phase. For all APIs considered, we determined the locus of API solubilization as well as the individual aggregation numbers (N_agg) of surfactants and API molecules in an API/surfactant aggregate. We further determined the hydrodynamic radius (R_h) of the API/surfactant aggregates in the absence and presence of the APIs. The size of the API/surfactant aggregates (N_agg, R_h) passes through a minimum upon lidocaine solubilization; it gradually increases upon naproxen solubilization and is almost constant upon fenofibrate solubilization. The results give valuable insights into the solubilization mechanisms of APIs in the C_iE_j surfactant aggregates. Our results reveal that fenofibrate is solely solubilized in the hydrophobic core of the C_iE_j surfactant aggregates, as only the hydrophobic chain length of the surfactant influences its solubilization. Naproxen is solubilized in the palisade layer of the surfactant aggregates, as both the hydrophobic and hydrophilic chain lengths are decisive for its solubilization. Lidocaine is mainly solubilized in the rather hydrophilic corona region of the surfactant aggregates, as the hydrophilic chain length of the surfactant governs its solubilization. The results further reveal that the hydrophilic/lipophilic balance is not an appropriate measure to estimate the solubilization capacity of surfactant aggregates.

Long-term anti-inflammatory effects of injectable celecoxib nanoparticle hydrogels for Achilles tendon regeneration

The treatment of chronic Achilles tendonitis (AT) often requires prolonged therapy and invasive therapeutic methods such as surgery or therapeutic endoscopy. To prevent the progression of chronic AT, excessive inflammation must be alleviated at an early stage. Corticosteroids or nonsteroidal anti-inflammatory drugs are generally prescribed to control inflammation; however, the high doses and long therapeutic periods required may lead to serious side effects. Herein, a local injectable poly(organophosphazene) (PPZ) - celecoxib (CXB) nanoparticle (PCNP) hydrogel system with long-term anti-inflammatory effects was developed for the treatment of tendonitis. The amphiphilic structure and thermosensitive mechanical properties of PPZ means that the hydrophobic CXB can be easily incorporated into the hydrophobic core to form PCNP at 4 °C. Following the injection of PCNP into the AT, PCNP hydrogel formed at body temperature and induced long-term local anti-inflammatory effects via sustained release of the PCNP. The therapeutic effects of the injectable PCNP system can alleviate excessive inflammation during the early stages of tissue damage and boost tissue regeneration. This study suggests that PCNP has significant potential as a long-term anti-inflammatory agent through sustained nonsteroidal anti-inflammatory drugs (NSAIDs) delivery and tissue regeneration boosting. STATEMENT OF SIGNIFICANCE: In the treatment of Achilles tendinitis, a long-term anti-inflammatory effect is needed to alleviate excessive inflammation and induce regeneration of the damaged Achilles tendon. Injectable poly(organophosphazene)(PPZ)-celecoxib(CXB) nanoparticles (PCNP) generated a long-term, localized-anti-inflammatory effect in the injected region, which successfully induced the expression of anti-inflammatory cytokines and suppressed pro-inflammatory cytokines, while the PCNPs degraded completely. Accordingly, regeneration of the damaged Achilles tendon was achieved through the long-term anti-inflammatory effect induced by a single PCNP injection. The PCNP system therefore has great potential in long-term NSAIDs delivery for various tissue engineering applications.

Applications and Limitations of Dendrimers in Biomedicine

Biomedicine represents one of the main study areas for dendrimers, which have proven to be valuable both in diagnostics and therapy, due to their capacity for improving solubility, absorption, bioavailability and targeted distribution. Molecular cytotoxicity constitutes a limiting characteristic, especially for cationic and higher-generation dendrimers. Antineoplastic research of dendrimers has been widely developed, and several types of poly(amidoamine) and poly(propylene imine) dendrimer complexes with doxorubicin, paclitaxel, imatinib, sunitinib, cisplatin, melphalan and methotrexate have shown an improvement in comparison with the drug molecule alone. The anti-inflammatory therapy focused on dendrimer complexes of ibuprofen, indomethacin, piroxicam, ketoprofen and diflunisal. In the context of the development of antibiotic-resistant bacterial strains, dendrimer complexes of fluoroquinolones, macrolides, beta-lactamines and aminoglycosides have shown promising effects. Regarding antiviral therapy, studies have been performed to develop dendrimer conjugates with tenofovir, maraviroc, zidovudine, oseltamivir and acyclovir, among others. Furthermore, cardiovascular therapy has strongly addressed dendrimers. Employed in imaging diagnostics, dendrimers reduce the dosage required to obtain images, thus improving the efficiency of radioisotopes. Dendrimers are macromolecular structures with multiple advantages that can suffer modifications depending on the chemical nature of the drug that has to be transported. The results obtained so far encourage the pursuit of new studies.

The role of pH and dose/solubility ratio on cocrystal dissolution, drug supersaturation and precipitation

Cocrystals that are more soluble than the constituent drug, generate supersaturation levels during dissolution and are predisposed to conversion to the less soluble drug. Drug release studies during cocrystal dissolution generally compare several cocrystals and their crystal structures. However, the influence of drug dose and solubility in different dissolution media has been scarcely reported. The present study aims to investigate how drug dose/solubility ratio (Do=C_dose/S_drug), cocrystal solubility advantage over drug (SA=S_cocrystal/S_drug), and dissolution media affect cocrystal dissolution-drug supersaturation and precipitation (DSP) behavior. SA and K_sp values of 1:1 cocrystals of meloxicam-salicylic acid (MLX-SLC) and meloxicam-maleic acid (MLX-MLE) were determined at cocrystal/drug eutectic points. Results demonstrate that both cocrystals enhance SA by orders of magnitude (20 to 100 times for the SLC and over 300 times for the MLE cocrystal) in the pH range of 1.6 to 6.5. It is shown that during dissolution, cocrystals regulate the interfacial pH (pH_int) to 1.6 for MLX-MLE and 4.5 for MLX-SLC, therefore diminishing the cocrystal dissolution rate dependence on bulk pH. Do values ranged from 2 (pH 6.5) to 410 (pH 1.6) and were mostly determined by the drug solubility dependence on pH. Drug release profiles show that maximum supersaturation (σ_max=C_max/S_drug)and AUC increased with increasing Do as pH decreased. When Do>>SA, the cocrystal solubility is not sufficient to dissolve the dose so that a dissolution-precipitation quasi-equilibrium state is able to sustain supersaturation for the extent of the experiment (24 h). When Do<<SA, cocrystal solubility is more than adequate to dissolve the dose. Low σ_max values (1.7 and 1.5) near the value of Do (2.3 and 2.4) were observed, where a large fraction of the cocrystal added is dissolved to reach σ_max. Two different cocrystal to drug conversion pathways were observed: (1) surface nucleation of the metastable MLX polymorph IV on the dissolving cocrystal preceeded formation of the stable MLX polymorph I in bulk solution (in all conditions without FeSSIF), and (2) bulk nucleation of the stable MLX polymorph (in FeSSIF). The interplay between cocrystal SA, Do_, and drug precipitation pathways provide a framework to interpret and understand the DSP behavior of cocrystals.

The Role of Non-Ionic Surfactants in Solubilization and Delivery of Sparingly Soluble Drug Naproxen Sodium (NS): A Case Study

Nonsteroidal anti-inflammatory hydrophobic drugs (NSAIDs) are amongst the most commonly given categories of drugs worldwide in the treatment of pain, irritation and some of them even fever in many conditions. Critical micelle concentration of NSAIDs with Naproxen sodium (NS) and its mixture with non-ionic surfactants i.e. Tween 20, Tween 40 and Tween 60 was investigated at 293 K, 303 K, 313 K and 323 K at different concentrations using surface tension and dynamic laser light scattering (DLS) techniques. Due to amphiphilic behaviour in aqueous solution NS form aggregates at sufficiently high concentration. Thermodynamic/adsorption properties like free energy of micellization (ΔGmic), enthalpy of micellization (ΔHmic), entropy of micellization (ΔSmic), Γmic and area per molecule (A2) of NS in the presence of surfactants were also measured at different temperatures. The results showed that the presence of surfactants favoured the ΔGmic and become more enhanced with increase in temperature. Further the solubility of drug is more favourable with increase in polyethylene chain in basic surfactant molecules i.e. 20–60, which indicates that Tween-60 enhanced the solubility of NS more comparatively to Tween-40 and Tween-20 and may be applied as best additive for solubilisation of NS.

Deconvolution procedure of the UV-vis spectra. A powerful tool for the estimation of the binding of a model drug to specific solubilisation loci of bio-compatible aqueous surfactant-forming micelle

UV-vis-spectra evolution of Nile Red loaded into Tween 20 micelles with pH and [Tween 20] have been analysed in a non-conventional manner by exploiting the deconvolution method. The number of buried sub-bands has been found to depend on both pH and bio-surfactant concentration, whose positions have been associated to Nile Red confined in aqueous solution and in the three micellar solubilisation sites. For the first time, by using an extended classical two-pseudo-phases-model, the robust treatment of the spectrophotometric data allows the estimation of Nile Red binding constant to the available loci. Hosting capability towards Nile Red is exalted by the pH enhancement. Comparison between binding constant values classically evaluated and those estimated by the deconvolution protocol unveiled that overall binding values perfectly match with the mean values of the local binding sites. This result suggests that deconvolution procedure provides more precise and reliable values, which are more representative of drug confinement.

In situ intestinal permeability and in vivo oral bioavailability of celecoxib in supersaturating self-emulsifying drug delivery system

In order to characterize the in situ intestinal permeability and in vivo oral bioavailability of celecoxib (CXB), a poorly water-soluble cyclooxygenase (COX)-2 inhibitor, various formulations including the self-emulsifying drug delivery system (SEDDS) and supersaturating SEDDS (S-SEDDS) were compared. The S-SEDDS formulation was obtained by adding Soluplus as a precipitation inhibitor to SEDDS, composed of Capryol 90 as oil, Tween 20 as surfactant, and Tetraglycol as cosurfactant (1:4.5:4.5 in volume ratio). An in situ single pass intestinal perfusion study in rats was performed with CXB-dissolved solutions at a concentration of 40 μg/mL. The effective permeability (Peff) of CXB in the control solution (2.5 v/v% Tween 20-containing PBS) was 6.39 × 10(-5) cm/s. The Peff value was significantly increased (P < 0.05) by the lipid-based formulation, yielding 1.5- and 2.9-fold increases for the SEDDS and S-SEDDS solutions, respectively, compared to the control solution. After oral administration of various formulations to rats at the equivalent dose of 100 mg/kg of CXB, the plasma drug level was measured by LC-MS/MS. The relative bioavailabilities of SEDDS and S-SEDDS were 263 and 355 %, respectively, compared to the CXB suspension as a reference. In particular, S-SEDDS revealed the highest Cmax and the smallest Tmax, indicating rapid and enhanced absorption with this formulation. This study illustrates the potential use of the S-SEDDS formulation in the oral delivery of poorly water-soluble compounds.

A study on solubilization of poorly soluble drugs by cyclodextrins and micelles: complexation and binding characteristics of sulfamethoxazole and trimethoprim

The present study is focused on the characterization of solubilization of poorly soluble drugs, that is, sulfamethoxazole (SMX) and trimethoprim (TMP) by cyclodextrins (α-, β-, and γ-CDs) and anionic surfactant sodium dodecyl sulfate (SDS). The phase solubility diagrams drawn from UV spectral measurements are of the A(L) type and indicate an enhancement of SMX and TMP solubility in the presence of CDs. Complex formation tendency of TMP with CDs followed the order: γ-CD > β-CD > α-C. However, the complex formation constant values, for SMX-CD system yielded the different affinity and follow the order: β-CD > γ-CD > α-CD. With taking into consideration of solubilization capacity of SDS micelles, it has been found that the solubility enhancement of TMP is much higher than that of SMX in the presence of SDS micelles. The binding constants of SMX and TMP obtained from the Benesi-Hildebrand equation are also confirmed by the estimated surface properties of SDS, employing the surface tension measurements. In order to elucidate the solubilization characteristics the surface tension measurements were also performed for nonionic surfactant Triton X-100. Polarity of the microenvironment and probable location of SMX and TMP were also discussed in the presence of various organic solvents.