Growth of Ag and Au Nanoparticles on Reduced and Oxidized Rutile TiO2(110) Surfaces

Visible light-driven sliver-modified titanium dioxide / bismuth molybdenum oxide with rapid interfacial charge-transfer for dual highly efficient photocatalytic degradation and disinfection

Enhancing interfacial charge transfer is a promising approach to improve the efficiency of photocatalysts. This research effectively exploited an Ag-modified Z-scheme TiO2/Bi2MoO6 heterojunction for photocatalytic degradation and disinfection under visible light. The catalyst was fabricated using simple hydrothermal and photo-deposition methods, and the characterization outcomes revealed that a built-in electric field (BIEF) was generated in the TiO2/Bi2MoO6 heterojunctions, which significantly promotes the separation of photogenerated carriers and increases light absorption efficiency. Besides, the theoretical calculation demonstrated that electron migration between TiO2 and Ag resulted in a strong coupling on the surface, which serves as the foundation for driving photoelectric charge transfer. Furthermore, the TiO2/Bi2MoO6/Ag-45 displayed 459% and 512% higher degradation efficiency of tetracycline hydrochloride (TC-HCl) and ciprofloxacin (CIP) after 100 min compared to pristine TiO2. Moreover, the complexes wholly inactivated gram-negative Escherichia coli (E. coli) and significantly inhibited the growth of gram-positive Staphylococcus albus (S. albus) after 200 min. Additionally, we have deduced the potential degradation pathways of TC-HCl and CIP and photocatalytic mechanisms. The research results provide an idea to solve the problems of limited light absorption range and rapid carrier combination speed of traditional photocatalytic materials, which is expected to be applied in the field of actual wastewater treatment.

Photoinduced Charge Transfer and Trapping on Single Gold Metal Nanoparticles on TiO2

We present a study of the effect of gold nanoparticles (Au NPs) on TiO₂ on charge generation and trapping during illumination with photons of energy larger than the substrate band gap. We used a novel characterization technique, photoassisted Kelvin probe force microscopy, to study the process at the single Au NP level. We found that the photoinduced electron transfer from TiO₂ to the Au NP increases logarithmically with light intensity due to the combined contribution of electron-hole pair generation in the space charge region in the TiO₂-air interface and in the metal-semiconductor junction. Our measurements on single particles provide direct evidence for electron trapping that hinders electron-hole recombination, a key factor in the enhancement of photo(electro)catalytic activity.

Chemical Degradation of Methylene Blue Dye Using TiO2/Au Nanoparticles

Gold nanoparticles (~10 nm) were deposited on titanium dioxide nanoparticles (~21 nm) and the material obtained was characterized using IR, UV-Vis, N2 adsorption-desorption isotherm, DLS, EDS (EDX), TEM, XPS, and XRD techniques. It was found that the methylene blue dye is degraded in the presence of this material when using hydrogen peroxide as the oxidant. Tests were performed at 2, 4, 6, and 24 h, with hydrogen peroxide contents varying from 1 to 5 mg/mL. Longer exposure time and a higher content of oxidant led to the degradation of methylene blue dye at up to 90%. The material can be reused several times with no loss of activity.

Photoresponses of Supported Au Single Atoms on TiO2(110) through the Metal-Induced Gap States

When a metal single-atom (SA) catalyst is supported on a semiconducting photocatalyst, the charge transfer of the photoexcited carriers to metal SAs can provide a synergetic activity for the co-catalysts. Here, we report the interfacial electronic coupling of the Au SAs on the TiO₂(110) surface using scanning tunneling microscopy/spectroscopy, in combination with first-principles calculations. Distinct energy and spatial distributions of the metal-induced gap states (MIGSs) are experimentally revealed for the Au SAs adsorbed at the terminal Ti sites and the oxygen vacancies. The localized MIGS below the Fermi level provides a dedicated channel for the transfer of a photoexcited hole from the TiO₂ substrate to the adsorbed Au SAs. The hole can weaken the Ti-Au bonding and activate the diffusion of Au SAs. Our results shed light on combining the advantages of photocatalysis and metal SA catalysis using a co-catalyst, which is promising to promote chemical reactions at low temperatures.

Tailoring the hexagonal boron nitride nanomesh on Rh(111) with gold

It is known that the hexagonal boron nitride (h-BN) monolayer has a periodically corrugated structure on Rh(111), termed "nanomesh", while the h-BN layer is planar on the close packed surfaces of coinage metals (Cu, Ag, Au) due the weak interactions. Our studies are aimed at understanding the metal-h-BN interaction, when both Rh and Au are present. On the one hand, the growth and thermal properties of gold deposited on h-BN nanomesh prepared on Rh(111) were studied. On the other hand, the formation of h-BN was examined on Au/Rh surface alloys prepared by the deposition of Au on Rh(111) and subsequent annealing at 1000 K. In each case, the h-BN was prepared by the decomposition of borazine at about 1000 K. Low energy ion scattering (LEIS), X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM) measurements revealed that the growth of Au on h-BN/Rh(111) at room temperature leads to the formation of mainly three dimensional (3D) gold nanoparticles, although at low coverages (<0.2 ML) 2D particles formed as well. Stepwise annealing to higher temperatures induces the intercalation of Au below the nanomesh, which was complete at around 1050 K. Some agglomeration and desorption of Au also took place. Interestingly, the nanomesh structure was observable after intercalation up to relatively large Au coverages. Measurements performed in the reverse order, namely exposing a Au/Rh(111) surface alloy to borazine, revealed that Rh atoms get covered by h-BN (or by its precursors) at significantly smaller borazine exposures than Au atoms. The nanomesh structure was essentially present up to a gold coverage of 0.9 ML, but with a smaller pore diameter, while it gradually disappeared at higher gold amounts. In this way the application of surface alloy supports provides a key for gradual tuning of the mesh morphology. Density functional theory calculations confirmed the decreased pore diameter of the BN layer upon the formation of a surface Rh-Au alloy layer.

Facile embedding of single vanadium atoms at the anatase TiO2(101) surface

The interaction of V with anatase TiO₂(101) is studied by high-resolution STM at various temperatures, and embedding of monomeric V is found.

Promoter effect of hydration on the nucleation of nanoparticles: direct observation for gold and copper on rutile TiO2 (110)

Direct observation of the promoting effect of hydration on the nucleation of gold and copper nanoparticles supported on partially reduced rutile TiO2 (110) is achieved by combined scanning tunneling microscopy experiments and density functional theory calculations. The experiments show a clear difference between the two metals. Gold nanoparticles grow at the vicinity of the surface hydroxyl domains, whereas the nucleation of copper is not substantially affected by hydration. The nucleation of gold on surface oxygen vacancies is observed although this is not the only preferential site. Theoretical calculations of the coadsorbed phases of gold, copper and hydroxyl species on stoichiometric and reduced TiO2 (110) surfaces under relevant conditions of temperature and pressure support the experimental interpretation. Surface hydration tends to stabilize significantly gold adsorption on the stoichiometric support, while its influence on copper adsorption is not pronounced. The theoretical analysis shows that the early stages of the nucleation on hydrated stoichiometric surfaces correspond to mono-hydroxylated metallic species co-chemisorbed with hydroxyl species, whereas those on hydrated reduced surfaces are metallic atoms bound to oxygen vacancies and weakly perturbed by surface hydration.

Electronic signatures of a model pollutant-particle system: chemisorbed phenol on TiO₂(110)

Environmentally persistent free radicals (EPFRs) are a class of composite organic/metal oxide pollutants that have recently been discovered to form from a wide variety of substituted benzenes chemisorbed to commonly encountered oxides. Although a qualitative understanding of EPFR formation on particulate metal oxides has been achieved, a detailed understanding of the charge transfer mechanism that must accompany the creation of an unpaired radical electron is lacking. In this study, we perform photoelectron spectroscopy and electron energy loss spectroscopy on a well-defined model system-phenol chemisorbed on TiO2(110) to directly observe changes in the electronic structure of the oxide and chemisorbed phenol as a function of adsorption temperature. We show strong evidence that, upon exposure at high temperature, empty states in the TiO2 are filled and the phenol HOMO is depopulated, as has been proposed in a conceptual model of EPFR formation. This experimental evidence of charge transfer provides a deeper understanding of the EPFR formation mechanism to guide future experimental and computational studies as well as potential environmental remediation strategies.

Ni cluster nucleation and growth on the anatase TiO2(101) surface: a density functional theory study

The Ni–TiO₂ interaction is the main driving force at the initial stage of Ni nucleation. The Ni–Ni interaction begins to control the growth process as the cluster size gets larger.

A charge optimized many-body (COMB) potential for titanium and titania

This work proposes an empirical, variable charge potential for Ti and TiO(2) systems based on the charge-optimized many-body (COMB) potential framework. The parameters of the potential function are fit to the structural and mechanical properties of the Ti hcp phase, the TiO(2) rutile phase, and the energetics of polymorphs of both Ti and TiO(2). The relative stabilities of TiO(2) rutile surfaces are predicted and compared to the results of density functional theory (DFT) and empirical potential calculations. The transferability of the developed potential is demonstrated by determining the adsorption energy of Cu clusters of various sizes on the rutile TiO(2)(1 1 0) surface using molecular dynamics simulations. The results indicate that the adsorption energy is dependent on the number of Cu-Cu bonds and Cu-O bonds formed at the Cu/TiO(2) interface. The adsorption energies of Cu clusters on the reduced and oxidized TiO(2)(1 1 0) surfaces are also investigated, and the COMB potential predicts enhanced bonding between Cu clusters and the oxidized surface, which is consistent with both experimental observations and the results of DFT calculations for other transition metals (Au and Ag) on this oxidized surface.

Formation and sintering of Pt nanoparticles on vicinal rutile TiO2 surfaces

The formation and sintering of Pt nanoparticles on vicinal and flat rutile TiO₂ surfaces is studied by high-resolution STM to unravel the influence of the surface morphology.