Characterization of a diesel-degrading bacterium, Pseudomonas aeruginosa IU5, isolated from oil-contaminated soil in Korea

Diesel-degradation by indigenous bacteria of petroleum-contaminated soils

Relying on native microorganisms is crucial for bioremediating petroleum-contaminated soils within this oil field. This study aimed to isolate native bacteria and investigate their ability to degrade petroleum hydrocarbons in contaminated soils. Flame ionization detector gas chromatography analyzed the capacity of Indigenous bacterial isolates to break down diesel fuel in an aquatic environment. Soil samples were collected from the Naft-Shahr area. Initially, 126 bacterial isolates were obtained from these soils, of which only 48 species could grow on a diesel-containing medium. Further analysis identified the top 8 isolates with high diesel removal potential. Results showed that the diesel removal percentage ranged from 26 to 76% at an initial diesel concentration of 3.7 g. L - 1 after 48 h, without adding any supplementary surface-active agent. Four top isolates were selected based on their degradation activity, removal yield, and biodegradation rate and were identified using 16S rRNA gene sequencing and phylogenetic analysis. Sequence alignment revealed that isolates B11Pet, B19Pet, B27Pet, and B48Pet belong to Staphylococcus gallinarum, Paenarthrobacter nitroguajacolicus, Arthrobacter citreus, and Bacillus thuringiensis, respectively. Among these, Bacillus thuringiensis (B48Pet), with a specific growth rate of 0.211 h⁻1, could uniformly remove all diesel hydrocarbon fractions at 58.81 mg. L⁻1. h⁻1. This strain, alone or in consortia, represents a promising strategy for the bioremediation of petroleum-contaminated soils.

N-Alkane Assimilation by Pseudomonas aeruginosa and Its Interactions with Virulence and Antibiotic Resistance

Pseudomonas aeruginosa strains with potential for degrading n-alkanes are frequently cultured from hydrocarbon-contaminated sites. The initial hydroxylation step of long-chain n-alkanes is mediated by the chromosomally encoded AlkB1 and AlkB2 alkane hydroxylases. The acquisition of an additional P. putida GPo1-like alkane hydroxylase gene cluster can extend the substrate range assimilated by P. aeruginosa to Collapse

Key Words

• AlkB
• MexAB-OprM
• P. aeruginosa
• alkane hydroxylase
• antibiotic resistance
• hydrocarbon pollution
• solvent tolerance

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Balázs Libisch Institute of Genetics and Biotechnology, Hungarian University of Agriculture and Life Sciences, H-2100 Gödöllő, Hungary

Collapse

Collaborators Collapse

Characterization of Diesel Degrading Indigenous Bacterial Strains, Acinetobacter pittii and Pseudomonas aeruginosa, Isolated from Oil Contaminated Soils

In this study, 13 diesel degrading bacteria were isolated from the oil contaminated soils and the promising strains identified as Acinetobacter pittii ED1 and Pseudomonas aeruginosa BN were evaluated for their diesel degrading capabilities. These strains degraded the diesel optimally at 30 °C, pH 7.0 and 1% diesel concentration. Both the strains produced biofilm at 1% diesel concentration indicating their ability to tolerate diesel induced abiotic stress. Gravimetric analysis of the spent medium after 7 days of incubation showed that A. pittii ED1 and P. aeruginosa BN degraded 68.61% and 76% diesel, respectively, while biodegradation reached more than 90% after 21 days. Fourier Transform Infrared (FTIR) analysis of the degraded diesel showed 1636.67 cm-1 (C=C stretch, N-H bond) peak corresponding to alkenes and primary amines, while GC-TOF-MS analysis showed decline in hydrocarbon intensities after 7 days of incubation. The present study revealed that newly isolated A. pittii ED1 and P. aeruginosa BN were able to degrade diesel hydrocarbons (C11-C18, and C19-C24) efficiently and have potential for bioremediation of the oil-contaminated sites.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12088-024-01317-3.

Bioremediation of environmental organic pollutants by Pseudomonas aeruginosa: Mechanisms, methods and challenges

The development of the chemical industry has led to a boom in daily consumption and convenience, but has also led to the release of large amounts of organic pollutants, such as petroleum hydrocarbons, plastics, pesticides, and dyes. These pollutants are often recalcitrant to degradation in the environment, whereby the most problematic compounds may even lead to carcinogenesis, teratogenesis and mutagenesis in animals and humans after accumulation in the food chain. Microbial degradation of organic pollutants is efficient and environmentally friendly, which is why it is considered an ideal method. Numerous studies have shown that Pseudomonas aeruginosa is a powerful platform for the remediation of environmental pollution with organic chemicals due to its diverse metabolic networks and its ability to secrete biosurfactants to make hydrophobic substrates more bioavailable, thereby facilitating degradation. In this paper, the mechanisms and methods of the bioremediation of environmental organic pollutants (EOPs) by P. aeruginosa are reviewed. The challenges of current studies are highlighted, and new strategies for future research are prospected. Metabolic pathways and critical enzymes must be further deciphered, which is significant for the construction of a bioremediation platform based on this powerful organism.

Characterization of petroleum degrading bacteria and its optimization conditions on effective utilization of petroleum hydrocarbons

Hydrocarbon contamination is continuing to be a serious environmental problem because of their toxicity. Hydrocarbon components have been known to be carcinogens and neurotoxic organic pollutants. The physical and chemical methods of petroleum removal have become ineffective and also are very costly. Therefore, bioremediation is considered the promising technology for the treatment of these contaminated sites since it is cost-effective and will lead to complete mineralization.The current study also concentrates on bioremediation of petroleum products by bacterium isolated from petroleum hydrocarbon contaminated soil. The current work shows that bacterial strains obtained from a petroleum hydrocarbon contaminated environment may degrade petroleum compounds. Two strains Bacillus licheniformis ARMP2 and Pseudomonas aeruginosa ARMP8 were identified as petroleum-degrading bacteria of the isolated bacterial colonies. The best growth conditions for the ARMP2 strain were determined to be pH 9, temperature 29 °C with sodium nitrate as its nitrogen source, whereas for the ARMP8 strain the optimal growth was found at pH 7, temperature 39 °C, and ammonium chloride as the nitrogen source. Both strains were shown to be effective at degrading petroleum chemicals confirmed by GCMS. Overall petroleum product degradation efficiency of the strains ARMP2 and ARMP8 was about 88 % and 73 % respectively in 48 h.The strains Bacillus licheniformis ARMP2 and Pseudomonas aeruginosa ARMP8 were shown to be effective at degrading petroleum compounds in the current study. Even greater results might be obtained if the organisms were utilised in consortia or the degradation time period was extended.

Aislamiento y caracterización de bacterias endémicas colombianas con capacidad de degradar tolueno

Los hidrocarburos aromáticos monocíclicos: benceno, tolueno, etilbenceno y xileno (BTEX), presentes en crudo y refinados de petróleo, hacen parte de los compuestos con más impacto en el medio ambiente y la salud humana, debido a su naturaleza cancerígena, mutagénica y altamente tóxica. Esta investigación tuvo como objetivo obtener y caracterizar bacterias capaces de degradar tolueno. Se realizaron tres muestreos de suelo contaminado con hidrocarburos del Valle del Cauca en tres condiciones: gasolinería, derrame accidental y taller mecánico. Se aislaron bacterias capaces de crecer en tolueno vapor como única fuente de carbono y se caracterizaron a nivel morfológico, bioquímico y molecular. Para la caracterización molecular se amplificó, secuenció y analizó con herramientas bioinformáticas el gen ribosomal 16S. Se evaluó la utilización de tolueno directo con concentración al 1% como única fuente de carbono. Se logró aislar 29 bacterias con capacidad de metabolizar tolueno. La caracterización bioquímica y molecular identificó a las bacterias aisladas de suelo contaminado como Pseudomonas y Stenotrophomonas. Las bacterias aisladas en el taller mecánico resultaron ser los microorganismos con mejor crecimiento en tolueno como fuente de carbono, poseen un gran potencial para ser utilizadas para fines de biorremediación de suelos y aguas contaminadas con BTEX.

Uptake and detoxification of diesel oil by a tropical soil Actinomycete Gordonia amicalis HS-11: Cellular responses and degradation perspectives

A tropical soil Actinomycete, Gordonia amicalis HS-11, has been previously demonstrated to degrade unsaturated and saturated hydrocarbons (squalene and n-hexadecane, respectively) in an effective manner. In present study, G. amicalis HS-11 degraded 92.85 ± 3.42% of the provided diesel oil [1% (v/v)] after 16 days of aerobic incubation. The effect of different culture conditions such as carbon source, nitrogen source, pH, temperature, and aeration on degradation was studied. During degradation, this Actinomycete synthesized surface active compounds (SACs) in an extracellular manner that brought about a reduction in surface tension from 69 ± 2.1 to 30 ± 1.1 mN m^-1 after 16 days. The morphology of cells grown on diesel was monitored by using a Field Emission Scanning Electron Microscope. Diesel-grown cells were longer and clumped with smooth surfaces, possibly due to the secretion of SACs. The interaction between the cells and diesel oil was studied by Confocal Laser Scanning Microscope. Some cells were adherent on small diesel droplets and others were present in the non-attached form thus confirming the emulsification ability of this organism. The fatty acid profiles of the organism grown on diesel oil for 48 h were different from those on Luria Bertani Broth. The genotoxicity and cytotoxicity of diesel oil before and after degradation were determined. Cytogenetic parameters such as mitotic index (MI); mitosis distribution and chromosomal aberration (type and frequency) were assessed. Oxidative stress was evaluated by measuring levels of catalase, superoxide dismutase and concentration of malondialdehyde. On the basis of these studies it was deduced that the degradation metabolites were relatively non-toxic.

Isolation, identification, and characterization of diesel-oil-degrading bacterial strains indigenous to Changqing oil field, China

In the present study, 12 indigenous diesel-oil-degrading bacteria were isolated from the petroleum-contaminated soils of the Changqing oil field (Xi'an, China). Measurement of the diesel-oil degradation rates of these strains by the gravimetric method revealed that they ranged from 42% to 66% within 2 weeks. The highest degradation rates were observed from strains CQ8-1 (66%), CQ8-2 (62.6%), and CQ11 (59%), which were identified as Bacillus thuringiensis, Ochrobactrum anthropi, and Bordetella bronchialis, respectively, based on their 16S rDNA sequences. Moreover, the physiological and biochemical properties of these three strains were analyzed by Gram staining, catalase, oxidase, and Voges-Proskauer tests. Transmission electron microscopy showed that all three strains were rod shaped with flagella. Gas chromatography and mass spectrometric analyses indicated that medium- and long-chain n-alkanes in diesel oil (C11-C29) were degraded to different degrees by B. thuringiensis, O. anthropi, and B. bronchialis, and the degradation rates gradually decreased as the carbon numbers increased. Overall, the results of this study indicate strains CQ8-1, CQ8-2, and CQ11 might be useful for environmentally friendly and cost-effective bioremediation of oil-contaminated soils.

Petrophilic, Fe(III) Reducing Exoelectrogen Citrobacter sp. KVM11, Isolated From Hydrocarbon Fed Microbial Electrochemical Remediation Systems

Exoelectrogenic biofilms capable of extracellular electron transfer are important in advanced technologies such as those used in microbial electrochemical remediation systems (MERS) Few bacterial strains have been, nevertheless, obtained from MERS exoelectrogenic biofilms and characterized for bioremediation potential. Here we report the identification of one such bacterial strain, Citrobacter sp. KVM11, a petrophilic, iron reducing bacterial strain isolated from hydrocarbon fed MERS, producing anodic currents in microbial electrochemical systems. Fe(III) reduction of 90.01 ± 0.43% was observed during 5 weeks of incubation with Fe(III) supplemented liquid cultures. Biodegradation screening assays showed that the hydrocarbon degradation had been carried out by metabolically active cells accompanied by growth. The characteristic feature of diazo dye decolorization was used as a simple criterion for evaluating the electrochemical activity in the candidate microbe. The electrochemical activities of the strain KVM11 were characterized in a single chamber fuel cell and three electrode electrochemical cells. The inoculation of strain KVM11 amended with acetate and citrate as the sole carbon and energy sources has resulted in an increase in anodic currents (maximum current density) of 212 ± 3 and 359 ± mA/m2 with respective coulombic efficiencies of 19.5 and 34.9% in a single chamber fuel cells. Cyclic voltammetry studies showed that anaerobically grown cells of strain KVM11 are electrochemically active whereas aerobically grown cells lacked the electrochemical activity. Electrobioremediation potential of the strain KVM11 was investigated in hydrocarbonoclastic and dye detoxification conditions using MERS. About 89.60% of 400 mg l-1 azo dye was removed during the first 24 h of operation and it reached below detection limits by the end of the batch operation (60 h). Current generation and biodegradation capabilities of strain KVM11 were examined using an initial concentration of 800 mg l-1 of diesel range hydrocarbons (C9-C36) in MERS (maximum currentdensity 50.64 ± 7 mA/m2; power density 4.08 ± 2 mW/m2, 1000 ω, hydrocarbon removal 60.14 ± 0.7%). Such observations reveal the potential of electroactive biofilms in the simultaneous remediation of hydrocarbon contaminated environments with generation of energy.

Integrated electrochemical treatment systems for facilitating the bioremediation of oil spill contaminated soil

Bioremediation plays an important role in oil spill management and bio-electrochemical treatment systems are supposed to represent a new technology for both effective remediation and energy recovery. Diesel removal rate increased by four times in microbial fuel cells (MFCs) since the electrode served as an electron acceptor, and high power density (29.05 W m^-3) at current density 72.38 A m^-3 was achieved using diesel (v/v 1%) as the sole substrate. As revealed by Scanning electron microscope images, carbon fibres in the anode electrode were covered with biofilm and the bacterial colloids which build the link between carbon fibres and enhance electron transmission. Trace metabolites produced during the anaerobic biodegradation were identified by gas chromatography-mass spectrometry. These metabolites may act as emulsifying agents that benefit oil dispersion and play a vital role in bioremediation of oil spills in field applications.

Identification of Electrode Respiring, Hydrocarbonoclastic Bacterial Strain Stenotrophomonas maltophilia MK2 Highlights the Untapped Potential for Environmental Bioremediation

Electrode respiring bacteria (ERB) possess a great potential for many biotechnological applications such as microbial electrochemical remediation systems (MERS) because of their exoelectrogenic capabilities to degrade xenobiotic pollutants. Very few ERB have been isolated from MERS, those exhibited a bioremediation potential toward organic contaminants. Here we report once such bacterial strain, Stenotrophomonas maltophilia MK2, a facultative anaerobic bacterium isolated from a hydrocarbon fed MERS, showed a potent hydrocarbonoclastic behavior under aerobic and anaerobic environments. Distinct properties of the strain MK2 were anaerobic fermentation of the amino acids, electrode respiration, anaerobic nitrate reduction and the ability to metabolize n-alkane components (C8–C36) of petroleum hydrocarbons (PH) including the biomarkers, pristine and phytane. The characteristic of diazoic dye decolorization was used as a criterion for pre-screening the possible electrochemically active microbial candidates. Bioelectricity generation with concomitant dye decolorization in MERS showed that the strain is electrochemically active. In acetate fed microbial fuel cells (MFCs), maximum current density of 273 ± 8 mA/m² (1000 Ω) was produced (power density 113 ± 7 mW/m²) by strain MK2 with a coulombic efficiency of 34.8%. Further, the presence of possible alkane hydroxylase genes (alkB and rubA) in the strain MK2 indicated that the genes involved in hydrocarbon degradation are of diverse origin. Such observations demonstrated the potential of facultative hydrocarbon degradation in contaminated environments. Identification of such a novel petrochemical hydrocarbon degrading ERB is likely to offer a new route to the sustainable bioremedial process of source zone contamination with simultaneous energy generation through MERS.

Enhanced removal of petroleum hydrocarbons using a bioelectrochemical remediation system with pre-cultured anodes

Bioelectrochemical remediation (BER) systems such as microbial fuel cells (MFCs) have recently emerged as a green technology for the effective remediation of petroleum hydrocarbon contaminants (PH) coupled with simultaneous energy recovery. Recent research has shown that biofilms previously enriched for substrate degrading bacteria resulted in excellent performance in terms of substrate removal and electricity generation but the effects on hydrocarbon contaminant degradation were not examined. Here we investigate the differences between enriched biofilm anodes and freshly inoculated new anodes in diesel fed single chamber mediatorless microbial fuel cells (DMFC) using various techniques for the enhancement of PH contaminant remediation with concomitant electricity generation. An anodophilic microbial consortium previously selected for over a year through continuous culturing with a diesel concentration of about 800mgl(-1) and which now showed complete removal of this concentration of diesel within 30days was compared to that of a freshly inoculated new anode MFC (showing 83.4% removal of diesel) with a simultaneous power generation of 90.81mW/m(2) and 15.04mW/m(2) respectively. The behaviour of pre-cultured anodes at a higher concentration of PH (8000mgl(-1)) was also investigated. Scanning electron microscopy observation revealed a thick biofilm covering the pre-cultured anodic electrode but not the anode from the freshly inoculated MFC. High resolution imaging showed the presence of thin 60nm diametre pilus-like projections emanating from the cells. Anodic microbial community profiling confirmed that the selection for diesel degrading exoelectrogenic bacteria had occurred. Identification of a biodegradative gene (alkB) provided strong evidence of the catabolic pathway used for diesel degradation in the DMFCs.

Biosurfactant production by Pseudomonas aeruginosa DSVP20 isolated from petroleum hydrocarbon-contaminated soil and its physicochemical characterization

Among 348 microbial strains isolated from petroleum hydrocarbon-contaminated soil, five were selected for their ability to produce biosurfactant based on battery of screening assay including hemolytic activity, surface tension reduction, drop collapse assay, emulsification activity, and cell surface hydrophobicity studies. Of these, bacterial isolate DSVP20 was identified as Pseudomonas aeruginosa (NCBI GenBank accession no. GQ865644) based on biochemical characterization and the 16S rDNA analysis, and it was found to be a potential candidate for biosurfactant production. Maximum biosurfactant production recorded by P. aeruginosa DSVP20 was 6.7 g/l after 72 h at 150 rpm and at a temperature of 30 °C. Chromatographic analysis and high-performance liquid chromatography-mass spectrometry (HPLC-MS) revealed that it was a glycolipid in nature which was further confirmed by nuclear magnetic resonance (NMR) spectroscopy. Bioremediation studies using purified biosurfactant showed that P. aeruginosa DSVP20 has the ability to degrade eicosane (97%), pristane (75%), and fluoranthene (47%) when studied at different time intervals for a total of 7 days. The results of this study showed that the P. aeruginosa DSVP20 and/or biosurfactant produced by this isolate have the potential role in bioremediation of petroleum hydrocarbon-contaminated soil.

Sunlight mediated diesel degradation under saline conditions using ionic silver coated sand via nanoreduction: use of impregnated form of thiourea modified chitosan membranes for ex situ application

The present research investigates the use of ionic silver coated sand dust (ISSD) for the sunlight mediated degradation of diesel under saline conditions. Sand dust was used as a template for reduction of silver ions by effective removal of chloride ions. Diesel degradation was estimated in terms of degradation (%), chloride removal, volume reduction and nanoparticle synthesis, respectively. The process was optimized using a 7-level Box-Behnken design. Among several factors, time (B), Tween 80 (C), ISSD dosage (D) and silver(I) concentration (F) were found to be most significant. Maximum diesel degradation 99.8% was obtained in a period of 14 h which was analyzed by gas chromatography. XPS analysis confirmed silver reduction as the underlying phenomena. TEM analysis and albeit first approximation method confirmed that enhanced degradation occurred due to physical contact between diesel components and ISSD. First order kinetic model exhibited the best fit. Light microscopy results showed the various stages in diesel degradation by a reduction in bubble size. Ex situ application was carried out using ISSD impregnated thiourea modified chitosan/PVA membranes by surface floatation technique for the remediation of diesel contaminated sea water. Complete diesel degradation was noted after 48 h of sunlight exposure.

Characterization of hydrocarbon-degrading and biosurfactant-producing Pseudomonas sp. P-1 strain as a potential tool for bioremediation of petroleum-contaminated soil

The Pseudomonas sp. P-1 strain, isolated from heavily petroleum hydrocarbon-contaminated soil, was investigated for its capability to degrade hydrocarbons and produce a biosurfactant. The strain degraded crude oil, fractions A5 and P3 of crude oil, and hexadecane (27, 39, 27 and 13% of hydrocarbons added to culture medium were degraded, respectively) but had no ability to degrade phenanthrene. Additionally, the presence of gene-encoding enzymes responsible for the degradation of alkanes and naphthalene in the genome of the P-1 strain was reported. Positive results of blood agar and methylene blue agar tests, as well as the presence of gene rhl, involved in the biosynthesis of rhamnolipid, confirmed the ability of P-1 for synthesis of glycolipid biosurfactant. 1H and 13C nuclear magnetic resonance, Fourier transform infrared spectrum and mass spectrum analyses indicated that the extracted biosurfactant was affiliated with rhamnolipid. The results of this study indicate that the P-1 and/or biosurfactant produced by this strain have the potential to be used in bioremediation of hydrocarbon-contaminated soils.

Diesel oil removal by immobilized Pseudoxanthomonas sp. RN402

Pseudoxanthomonas sp. RN402 was capable of degrading diesel, crude oil, n-tetradecane and n-hexadecane. The RN402 cells were immobilized on the surface of high-density polyethylene plastic pellets at a maximum cell density of 10(8) most probable number (MPN) g(-1) of plastic pellets. The immobilized cells not only showed a higher efficacy of diesel oil removal than free cells but could also degrade higher concentrations of diesel oil. The rate of diesel oil removal by immobilized RN402 cells in liquid culture was 1,050 mg l(-1) day(-1). Moreover, the immobilized cells could maintain high efficacy and viability throughout 70 cycles of bioremedial treatment of diesel-contaminated water. The stability of diesel oil degradation in the immobilized cells resulted from the ability of living RN402 cells to attach to material surfaces by biofilm formation, as was shown by CLSM imaging. These characteristics of the immobilized RN402 cells, including high degradative efficacy, stability and flotation, make them suitable for the purpose of continuous wastewater bioremediation.

Interaction of higher plant (jute), electrofused bacteria and mycorrhiza on anthracene biodegradation

The interaction of bacteria, mycorrhiza and jute (Corchotus capsulari, a higher plant) to reduce anthracene in different concentrations of spiked soils was investigated. Dominant indigenous bacterium (Pseudomonas sp.) isolated in the rhizosphere of jute was electrofused with anthracene degraders (Sphingomonas paucimobilis and Pseudomonas aeruginosa) which were able to produce different types of biosurfactants. The highest population (56 x 10(5)CFU/g) was found in the planted soil with the inoculation of mixtures of electrofused anthracene degraders after 7 days. The growth of anthracene degraders in the spiked soil was improved by gene transfer from indigenous bacteria. After 35 days, enhanced anthracene removals were observed in inoculated soils planted with jute (65.5-75.2%) compared with unplanted soil without inoculation (12.5%). The interaction of jute and electrofused S. paucimobilis enabled the greatest reduction of soil anthracene with or without the addition of P. aeruginosa. Mycorrhizal colonization was not significantly inhibited by anthracene in soils up to 150 mg/kg. Inoculation of jute with Glomus mosseae and Glomus intraradices improved plant growth and enhanced anthracene removal in the presence of electrofused S. paucimobilis.

Degradation characteristics of methyl ethyl ketone by Pseudomonas sp. KT-3 in liquid culture and biofilter

With ketone pollution forming an ever-growing problem, it is important to identify a ketone-degrading microorganism and establish its effect. Here, a methyl ethyl ketone (MEK)-degrading bacterium, Pseudomonas sp. KT-3, was isolated and its MEK degradation characteristics were examined in liquid cultures and a polyurethane-packed biofilter. In liquid cultures, strain KT-3 could degrade other ketone solvents, including diethyl ketone (DK), methyl propyl ketone (MPK), methyl isopropyl ketone (MIPK), methyl isobutyl ketone (MIBK), methyl butyl ketone (MBK) and methyl isoamyl ketone (MIAK). The maximum specific growth rate (mumax) of the isolate was 0.136 h(-1) in MEK medium supplemented with MEK as a sole carbon source, and kinetically, the maximum removal rate (Vm) and saturation constant (Km) for MEK were 12.28 mM g(-1)DCW h(-1) (DCW: dry cell weight) and 1.64 mM, respectively. MEK biodegradation by KT-3 was suppressed by the addition of MIBK or acetone, but not by toluene. In the tested biofilter, KT-3 exhibited a>90% removal efficiency for MEK inlet concentrations of around 500 ppmv at a space velocity (SV) of 150 h(-1). The elimination capacity of MEK was more influenced by SV than by the inlet concentration. Kinetic analysis showed that the maximum MEK removal rate (Vm) was 690 g m(-3) h(-1) and the saturation constant (Km) was 490 ppmv. Collectively, these results indicate the polyurethane sequencing batch biofilter with Pseudomonas sp. KT-3 will provide an excellent performance in the removal of gaseous MEK.