A new and efficient approach for construction of uridine/uracil auxotrophic mutants in the filamentous fungus Aspergillus oryzae using Agrobacterium tumefaciens-mediated transformation

Expression pattern, subcellular localization of Aspergillus oryzae ergosterol synthases, and their effects on ergosterol and fatty acid metabolism

Ergosterol is an important component of fungal cell membranes and participates in the regulation of its fluidity, permeability, and material transport. In our study, we found that the ergosterol biosynthesis pathway in Aspergillus oryzae is more complex than that in Saccharomyces cerevisiae, involving 49 enzymes and 25 reactions. In this study, we systematically analyzed the expression pattern and subcellular localization of A. oryzae ergosterol synthases and their effects on ergosterol and fatty acid metabolism. The results showed that ergosterol synthase genes were distributed across the eight chromosomes of the A. oryzae genome and were differentially expressed at different growth times. Subcellular localization analysis revealed that the mevalonate biosynthesis-related enzymes were localized in the cytoplasm, mitochondria, and peroxisomes; farnesyl pyrophosphate biosynthesis-related enzymes were mainly localized in the cytoplasm, peroxisomes, and mitochondria; while several ergosterol biosynthesis-related enzymes were localized in the endoplasmic reticulum and lipid droplets. Overexpression (OE) of these enzymes affected both ergosterol and fatty acid contents in A. oryzae. The ergosterol content was the highest in the AoHmgB-OE strain and the lowest in the AoHmgA-OE strain, while the fatty acid content was the highest in the AoErg26B-OE strain and the lowest in the AoErg26A-OE strain. Moreover, the ergosterol content was significantly increased in the AoHmgB/AoErg7B-, AoHmgB/AoErg9-, and AoErg1/AoErg7B-co-OE strains compared to the single gene OE strains. Our study results may offer a scientific foundation for genetic engineering research focusing on lipid metabolism in A. oryzae and related fungi, thereby facilitating the creation of fungal strains with enhanced ergosterol production.IMPORTANCEErgosterol, an important fungal cell membrane component, participates in the regulation of membrane fluidity, permeability, and material transport. Previous studies have demonstrated that the ergosterol biosynthesis pathway in Aspergillus oryzae exhibits greater complexity compared to that in Saccharomyces cerevisiae; nonetheless, research on the ergosterol biosynthesis pathway in A. oryzae remains limited. In this study, we determined the expression pattern and subcellular localization of ergosterol biosynthesis-related enzymes in A. oryzae. Additionally, we assessed the effects of the overexpression (OE) of ergosterol biosynthesis-related genes on ergosterol and fatty acid contents in A. oryzae. Therefore, our study may provide a scientific basis for genetic engineering research on lipid metabolism in A. oryzae and other fungal species.

Screening of pathogenicity-deficient Penicillium italicum mutants established by Agrobacterium tumefaciens-mediated transformation

Blue mold, caused by Penicillium italicum, is one of the main postharvest diseases of citrus fruits during storage and marketing. The pathogenic mechanism remains largely unclear. To explore the potential pathogenesis-related genes of this pathogen, a T-DNA insertion library of P. italicum PI5 was established via Agrobacterium tumefaciens-mediated transformation (ATMT). The system yielded 200-250 transformants per million conidia, and the transformants were genetically stable after five generations of successive subcultures on hygromycin-free media. 2700 transformants were obtained to generate a T-DNA insertion library of P. italicum. Only a few of the 200 randomly selected mutants exhibited significantly weakened virulence on citrus fruits, with two mutants displaying attenuated sporulation. The T-DNA in the two mutants existed as a single copy. Moreover, the mutant genes PiBla (PITC_048370) and PiFTF1 (PITC_077280) identified may be involved in conidia production by regulating expressions of the key regulatory components for conidiogenesis. These results demonstrated that the ATMT system is useful to obtain mutants of P. italicum for further investigation of the molecular mechanisms of pathogenicity and the obtained two pathogenesis-related genes might be novel loci associated with pathogenesis and conidia production.

Sub-genomic RNAi-assisted strain evolution of filamentous fungi for enhanced protein production

Genetic engineering at the genomic scale provides a rapid means to evolve microbes for desirable traits. However, in many filamentous fungi, such trials are daunted by low transformation efficiency. Differentially expressed genes under certain conditions may contain important regulatory factors. Accordingly, although manipulating these subsets of genes only can largely reduce the time and labor, engineering at such a sub-genomic level may also be able to improve the microbial performance. Herein, first using the industrially important cellulase-producing filamentous fungus Trichoderma reesei as a model organism, we constructed suppression subtractive hybridization (SSH) libraries enriched with differentially expressed genes under cellulase induction (MM-Avicel) and cellulase repression conditions (MM-Glucose). The libraries, in combination with RNA interference, enabled sub-genomic engineering of T. reesei for enhanced cellulase production. The ability of T. reesei to produce endoglucanase was improved by 2.8~3.3-fold. In addition, novel regulatory genes (tre49304, tre120391, and tre123541) were identified to affect cellulase expression in T. reesei. Iterative manipulation using the same strategy further increased the yield of endoglucanase activity to 75.6 U/mL, which was seven times as high as that of the wild type (10.8 U/mL). Moreover, using Humicola insolens as an example, such a sub-genomic RNAi-assisted strain evolution proved to be also useful in other industrially important filamentous fungi. H. insolens is a filamentous fungus commonly used to produce catalase, albeit with similarly low transformation efficiency and scarce knowledge underlying the regulation of catalase expression. By combining SSH and RNAi, a strain of H. insolens producing 28,500 ± 288 U/mL of catalase was obtained, which was 1.9 times as high as that of the parent strain.IMPORTANCEGenetic engineering at the genomic scale provides an unparalleled advantage in microbial strain improvement, which has previously been limited only to the organisms with high transformation efficiency such as Saccharomyces cerevisiae and Escherichia coli. Herein, using the filamentous fungus Trichoderma reesei as a model organism, we demonstrated that the advantage of suppression subtractive hybridization (SSH) to enrich differentially expressed genes and the convenience of RNA interference to manipulate a multitude of genes could be combined to overcome the inadequate transformation efficiency. With this sub-genomic evolution strategy, T. reesei could be iteratively engineered for higher cellulase production. Intriguingly, Humicola insolens, a fungus with even little knowledge in gene expression regulation, was also improved for catalase production. The same strategy may also be expanded to engineering other microorganisms for enhanced production of proteins, organic acids, and secondary metabolites.

Development of an Efficient CRISPR/Cas9 System in Fusarium verticillioides and Its Application in Reducing Mycotoxin Contamination

Fusarium verticillioides (F. verticillioides) is a globally recognized and highly impactful fungal pathogen of maize, causing yield losses and producing harmful mycotoxins that pose a threat to human and animal health. However, the genetic tools available for studying this crucial fungus are currently limited in comparison to other important fungal pathogens. To address this, an efficient CRISPR/Cas9 genome editing system based on an autonomously replicating plasmid with an AMA1 sequence was established in this study. First, gene disruption of pyrG and pyrE via nonhomologous end-joining (NHEJ) pathway was successfully achieved, with efficiency ranging from 66 to 100%. Second, precise gene deletions were achieved with remarkable efficiency using a dual sgRNA expression strategy. Third, the developed genome editing system can be applied to generate designer chromosomes in F. verticillioides, as evidenced by the deletion of a crucial 38 kb fragment required for fumonisin biosynthesis. Fourth, the pyrG recycling system has been established and successfully applied in F. verticillioides. Lastly, the developed ΔFUM1 and ΔFUM mutants can serve as biocontrol agents to reduce the fumonisin B1 (FB1) contamination produced by the toxigenic strain. Taken together, these significant advancements in genetic manipulation and biocontrol strategies provide valuable tools for studying and mitigating the impact of F. verticillioides on maize crops.

Construction of a New Agrobacterium tumefaciens-Mediated Transformation System based on a Dual Auxotrophic Approach in Cordyceps militaris

Cordyceps militaris is a significant edible fungus that produces a variety of bioactive compounds. We have previously established a uridine/uracil auxotrophic mutant and a corresponding Agrobacterium tumefaciens-mediated transformation (ATMT) system for genetic characterization in C. militaris using pyrG as a screening marker. In this study, we constructed an ATMT system based on a dual pyrG and hisB auxotrophic mutant of C. militaris. Using the uridine/uracil auxotrophic mutant as the background and pyrG as a selection marker, the hisB gene encoding imidazole glycerophosphate dehydratase, required for histidine biosynthesis, was knocked out by homologous recombination to construct a histidine auxotrophic C. militaris mutant. Then, pyrG in the histidine auxotrophic mutant was deleted to construct a ΔpyrG ΔhisB dual auxotrophic mutant. Further, we established an ATMT transformation system based on the dual auxotrophic C. militaris by using GFP and DsRed as reporter genes. Finally, to demonstrate the application of this dual transformation system for studies of gene function, knock out and complementation of the photoreceptor gene CmWC-1 in the dual auxotrophic C. militaris were performed. The newly constructed ATMT system with histidine and uridine/uracil auxotrophic markers provides a promising tool for genetic modifications in the medicinal fungus C. militaris.

Overexpression of kojR and the entire koj gene cluster affect the kojic acid synthesis in Aspergillus oryzae 3.042

Kojic acid (KA), a fungal secondary metabolite, has various applications in the cosmetics, pharmaceutical, and food industries. Aspergillus oryzae, the primary strain, has been identified as a koj gene cluster positively responsible for KA biosynthesis. In this study, we obtained transformants T58 and T31, which overexpressed either solo kojR or the entire koj gene cluster, respectively. These transformants exhibited peak KA production on the 5th day of shake flask fermentation, with 32.5 g/L and 26.57 g/L that 324.28 % and 246.87 % higher than the control strain with 7.64 g/L, respectively. Morphological analysis revealed that the highly productive KA strains had reduced conidial production but increased antioxidant capacity. The qRT-PCR analysis revealed that relative expression levels of kojR in the transformants were remarkably higher that the primary cause for the increased KA yield. Moreover, the high expression of kojR could also influence the expression of the key enzymes involved in the KA biosynthesis process, such as glucose dehydrogenase and gluconate dehydrogenase. These findings can assist in discovering more about how the koj gene cluster in A. oryzae influences its growth and KA production. And provides valuable insights into facilitating strain improvement and benefits for the future.

Synthetic Biology Tools for Engineering Aspergillus oryzae

For more than a thousand years, Aspergillus oryzae has been used in traditional culinary industries, including for food fermentation, brewing, and flavoring. In recent years, A. oryzae has been extensively used in deciphering the pathways of natural product synthesis and value-added compound bioproduction. Moreover, it is increasingly being used in modern biotechnology industries, such as for the production of enzymes and recombinant proteins. The investigation of A. oryzae has been significantly accelerated through the successive application of a diverse array of synthetic biology techniques and methodologies. In this review, the advancements in biological tools for the synthesis of A. oryzae, including DNA assembly technologies, gene expression regulatory elements, and genome editing systems, are discussed. Additionally, the challenges associated with the heterologous expression of A. oryzae are addressed.

Functional role of a novel zinc finger protein, AoZFA, in growth and kojic acid synthesis in Aspergillus oryzae

Kojic acid (KA) is a valuable secondary metabolite that is regulated by zinc finger proteins in Aspergillus oryzae. However, only two such proteins have been characterized to function in kojic acid production of A. oryzae to date. In this study, we identified a novel zinc finger protein, AoZFA, required for kojic acid biosynthesis in A. oryzae. Our results showed that disruption of AozfA led to increased expression of kojA and kojR involved in kojic acid synthesis, resulting in enhanced kojic acid production, while overexpression of AozfA had the opposite effect. Furthermore, deletion of kojR in the AozfA disruption strain abolished kojic acid production, whereas overexpression of kojR enhanced it, indicating that AoZFA regulates kojic acid production by affecting kojR. Transcriptional activation assay revealed that AoZFA is a transcriptional activator. Interestingly, when kojR was overexpressed in the AozfA overexpression strain, the production of kojic acid failed to be rescued, suggesting that AozfA plays a distinct role from kojR in kojic acid biosynthesis. Moreover, we found that AozfA was highly induced by zinc during early growth stages, and its overexpression inhibited the growth promoted by zinc, whereas its deletion had no effect, suggesting that AoZFA is non-essential but has a role in the response of A. oryzae to zinc. Overall, these findings provide new insights into the roles of zinc finger proteins in the growth and kojic acid production of A. oryzae.IMPORTANCEKojic acid (KA) is an economically valuable secondary metabolite produced by Aspergillus oryzae due to its vast biological activities. Genetic modification of A. oryzae has emerged as an efficient strategy for enhancing kojic acid production, which is dependent on the mining of genes involved in kojic acid synthesis. In this study, we have characterized a novel zinc-finger protein, AoZFA, as a negative regulator of kojic acid production by affecting kojR. AozfA is an excellent target for improving kojic acid production without any effects on the growth of A. oryzae. Furthermore, the simultaneous modification of AozfA and kojR exerts a more significant promotional effect on kojic acid production than the modification of single genes. This study provides new insights for the regulatory mechanism of zinc finger proteins in the growth and kojic acid production of A. oryzae.

The C2H2-type zinc-finger regulator AoKap5 is required for the growth and kojic acid synthesis in Aspergillus oryzae

Aspergillus oryzae is an important filamentous fungus widely used for the industrial production of fermented foods and secondary metabolites. The clarifying of the mechanism of the growth and secondary metabolites in A. oryzae is important for its industrial production and utilization. Here, the C2H2-type zinc-finger protein AoKap5 was characterized to be involved in the growth and kojic acid production in A. oryzae. The Aokap5-disrupted mutants were constructed by the CRISPR/Cas9 system, which displayed increased colony growth but decreased conidial formation. Deletion of Aokap5 enhanced the tolerance to cell-wall and oxidative but not osmotic stress. The transcriptional activation assay revealed that AoKap5 itself didn't have transcriptional activation activity. Disruption of Aokap5 resulted in the reduced production of kojic acid, coupled with the reduced expression of the kojic acid synthesis genes kojA and kojT. Meanwhile, overexpression of kojT could rescue the decreased production of kojic acid in Aokap5-deletion strain, indicating that Aokap5 serves upstream of kojT. Furthermore, the yeast one-hybrid assay demonstrated that AoKap5 could directly bind to the kojT promoter. These findings suggest that AoKap5 regulates kojic acid production through binding to the kojT promoter. This study provides an insight into the role of zinc finger protein in the growth and kojic acid biosynthesis of A. oryzae.

Large-Scale Production of Anti-RNase A VHH Expressed in pyrG Auxotrophic Aspergillus oryzae

Nanobodies, also referred to as VHH antibodies, are the smallest fragments of naturally produced camelid antibodies and are ideal affinity reagents due to their remarkable properties. They are considered an alternative to monoclonal antibodies (mAbs) with potential utility in imaging, diagnostic, and other biotechnological applications given the difficulties associated with mAb expression. Aspergillus oryzae (A. oryzae) is a potential system for the large-scale expression and production of functional VHH antibodies that can be used to meet the demand for affinity reagents. In this study, anti-RNase A VHH was expressed under the control of the glucoamylase promoter in pyrG auxotrophic A. oryzae grown in a fermenter. The feature of pyrG auxotrophy, selected for the construction of a stable and efficient platform, was established using homologous recombination. Pull-down assay, size exclusion chromatography, and surface plasmon resonance were used to confirm the binding specificity of anti-RNase A VHH to RNase A. The affinity of anti-RNase A VHH was nearly 18.3-fold higher (1.9 nM) when expressed in pyrG auxotrophic A. oryzae rather than in Escherichia coli. This demonstrates that pyrG auxotrophic A. oryzae is a practical, industrially scalable, and promising biotechnological platform for the large-scale production of functional VHH antibodies with high binding activity.

An efficient Agrobacterium-mediated system based on the pyrG auxotrophic marker for recombinant expression in the filamentous fungus Penicillium rubens

OBJECTIVES

This work aimed to construct a versatile, effective, and food-grade Agrobacterium tumefaciens-mediated transformation (ATMT) system for recombinant expression in the filamentous fungus Penicillium rubens (also known as Pencillium chrysogenum).

RESULTS

In this study, the wild-type P. chrysogenum VTCC 31172 strain was re-classified as P. rubens by a multilocus sequencing analysis. Further, the pyrG gene required for uridine/uracil biosynthesis was successfully deleted in the VTCC 31172 strain by homologous recombination to generate a stable uridine/uracil auxotrophic mutant (ΔpyrG). The growth of the P. rubens ΔpyrG strain could be restored by uridine/uracil supplementation, and a new ATMT system based on the uridine/uracil auxotrophic mechanism was established for this strain. The optimal ATMT efficiency could reach 1750 transformants for 10⁶ spores (equivalent to 0.18%). In addition, supplementation of uridine/uracil at the concentrations of 0.005-0.02% during the co-cultivation process significantly promoted transformation efficiency. Especially, we demonstrated that the pyrG marker and the amyB promoter from the koji mold Aspergillus oryzae were fully functional in P. rubens ΔpyrG. Expression of the DsRed reporter gene under the regulation of the A. oryzae amyB promoter lighted up the mycelium of P. rubens with a robust red signal under fluorescence microscopy. Furthermore, genomic integration of multiple copies of the Aspergillus fumigatus phyA gene under the control of the amyB promoter significantly enhanced phytase activity in P. rubens.

CONCLUSIONS

The ATMT system developed in our work provides a safe genetic platform for producing recombinant products in P. rubens without using drug resistance markers.

A newly constructed Agrobacterium-mediated transformation system based on the hisB auxotrophic marker for genetic manipulation in Aspergillus niger

The filamentous fungus Aspergillus niger is widely exploited as an industrial workhorse for producing enzymes and organic acids. So far, different genetic tools, including CRISPR/Cas9 genome editing strategies, have been developed for the engineering of A. niger. However, these tools usually require a suitable method for gene transfer into the fungal genome, like protoplast-mediated transformation (PMT) or Agrobacterium tumefaciens-mediated transformation (ATMT). Compared to PMT, ATMT is considered more advantageous because fungal spores can be used directly for genetic transformation instead of protoplasts. Although ATMT has been applied in many filamentous fungi, it remains less effective in A. niger. In the present study, we deleted the hisB gene and established an ATMT system for A. niger based on the histidine auxotrophic mechanism. Our results revealed that the ATMT system could achieve 300 transformants per 10⁷ fungal spores under optimal transformation conditions. The ATMT efficiency in this work is 5 - 60 times higher than those of the previous ATMT studies in A. niger. The ATMT system was successfully applied to express the DsRed fluorescent protein-encoding gene from the Discosoma coral in A. niger. Furthermore, we showed that the ATMT system was efficient for gene targeting in A. niger. The deletion efficiency of the laeA regulatory gene using hisB as a selectable marker could reach 68 - 85% in A. niger strains. The ATMT system constructed in our work represents a promising genetic tool for heterologous expression and gene targeting in the industrially important fungus A. niger.

The expression pattern, subcellular localization and function of three sterol 14α-demethylases in Aspergillus oryzae

Sterol 14α-demethylase catalyzes lanosterol hydroxylation, which is one of the key reactions in the biosynthetic pathway of sterols. There is only one sterol 14α-demethylases gene named Erg11 in Saccharomyces cerevisiae genome. In this study, three sterol 14α-demethylases genes named AoErg11A, AoErg11B and AoErg11C were identified in Aspergillus oryzae genome through bioinformatics analysis. The function of these three genes were studied by yeast complementation, and the expression pattern/subcellular localization of these genes/proteins were detected. The results showed that the three AoErg11s were expressed differently at different growth times and under different abiotic stresses. All of the three proteins were located in endoplasmic reticulum. The AoErg11s could not restore the temperature-sensitive phenotype of S. cerevisiae erg11 mutant. Overexpression of the three AoErg11s affected both growth and sporulation, which may be due to the effect of AoErg11s on ergosterol content. Therefore, this study revealed the functions of three AoErg11s and their effects on the growth and ergosterol biosynthesis of A. oryzae, which may contribute to the further understanding of the ergosterol biosynthesis and regulation mechanism in this important filamentous fungus, A. oryzae.

Identification of Six Thiolases and their Effects on Fatty Acid and Ergosterol Biosynthesis in Aspergillus oryzae

Thiolase plays important roles in lipid metabolism. It can be divided into degradative thiolases (Thioase I) and biosynthetic thiolases (thiolases II), which are involved in fatty acid β-oxidation and acetoacetyl-CoA biosynthesis, respectively. The Saccharomyces cerevisiae (S. cerevisiae) genome harbors only one gene each for thioase I and thiolase II, namely, Pot1 and Erg10, respectively. In this study, six thiolases (named AoErg10A-AoErg10F) were identified in Aspergillus oryzae (A. oryzae) genome using bioinformatics analysis. Quantitative reverse transcription-PCR (qRT-PCR) indicated that the expression of these six thiolases varied at different growth time and under different forms of abiotic stress. Subcellular localization analysis showed that AoErg10A was located in the cytoplasm, AoErg10B and AoErg10C in the mitochondria, and AoErg10D-AoErg10F in the peroxisome. Yeast heterologous complementation assays revealed that AoErg10A, AoErg10D, AoErg10E, AoErg10F and cytoplasmic AoErg10B (AoErg10B^ΔMTS) recovered the phenotypes of S. cerevisiae erg10 weak and lethal mutants, and that only AoErg10D-F recovered the phenotype of the pot1 mutant that cannot use oleic acid as the carbon source. Overexpression of AoErg10s either affected the growth speed or sporulation of the transgenic strains. In addition, the fatty acid and ergosterol content changed in all the AoErg10-overexpressing strains. This study revealed the function of six thiolases in A. oryzae and their effect on growth, and fatty acid and ergosterol biosynthesis, which may lay the foundation for genetic engineering for lipid metabolism in A. oryzae or other fungi. Importance Thiolase including thioase I and thiolase II, plays important roles in lipid metabolism. A. oryzae, one of the most industrially important filamentous fungi, has been widely used for manufacturing oriental fermented food such as sauce, miso, and sake for a long time. Besides, A. oryzae has a high capability in production of high lipid content and has been used for lipid production. Thus, it is very important to investigate the function of thiolases in A. oryzae. In this study, six thiolase (named AoErg10A-AoErg10F) were identified by bioinformatics analysis. Unlike other reported thiolases in fungi, three of the six thiolases showed dual function of thioase I and thiolase II in S. cerevisiae, indicating the lipid metabolism is more complex in A. oryzae. The reveal of function of these thiolases in A. oryzae can lay the foundation for genetic engineering for lipid metabolism in A. oryzae or other fungi.

Overexpression of a novel gene Aokap2 affects the growth and kojic acid production in Aspergillus oryzae

BACKGROUND

Aspergillus oryzae is an industrially important filamentous fungus for the production of fermentative food, commercial enzyme and valuable secondary metabolites. Although the whole genome of A. oryzae has been sequenced in 2005, there is currently not enough research on functional genes that affect the growth and secondary metabolites of A. oryzae. This study aimed to identify and characterize functional genes involved in the growth and secondary metabolites of A. oryzae.

METHODS AND RESULTS

Our previous work on the developmental transcriptome of A. oryzae found that an uncharacterized gene Aokap2 was repressed during the development of A. oryzae. In this study, the gene expression pattern was verified by qRT-PCR. Phylogenetic analysis revealed that AoKAP2 has the species specificity of Aspergillus. Furthermore, Aokap2 was overexpressed using the A. oryzae amyB promoter and overexpression of Aokap2 caused the inhibition in mycelium growth, conidia formation and biomass. Additionally, overexpression of Aokap2 increased the production of kojic acid. In accordance with the enhanced kojic acid, the overexpression of Aokap2 led to elevated transcription levels of the key kojic acid synthesis gene kojA and the global transcriptional regulator gene of secondary metabolism laeA. Moreover, the expression of Aokap2 was down-regulated significantly in the laeA mutant. Meanwhile, overexpression of Aokap2 in the kojA disrupted strain resulted in a ΔkojA strain-like phenotype with significant inhibition in kojic acid production.

CONCLUSION

Taken together, these data suggest that a novel gene Aokap2 is involved in the growth and overexpression of Aokap2 increased kojic acid production through affecting the expression of laeA and kojA. The identification of Aokap2 provides a new target for genetic modification of the growth and the production of kojic acid in A. oryzae.

Identification and characterization of Nramp transporter AoNramp1 in Aspergillus oryzae

The Nramp (natural resistance-associated macrophage protein) family of genes has been identified and characterized widely in many species. However, the Nramp genes and their characterizations have not been reported for Aspergillus oryzae. Here, only one Nramp gene AoNramp1 in A. oryzae genome was identified. Phylogenetic analysis revealed that AoNramp1 is not clustered with Nramps from yeast genus. Expression analysis showed that the transcript level of AoNramp1 was strongly induced under both Zn/Mn-replete and -deplete conditions. The GUS-staining assay indicated that the expression of AoNramp1 was strongly induced by Zn/Mn. Moreover, the AoNramp1 deletion and overexpression strains were constructed by the CRISPR/Cas9 system and A. oryzae amyB promoter, respectively. Phenotypic analysis showed that overexpression and deletion of AoNramp1 caused growth defects under Zn/Mn-deplete and -replete conditions, including mycelium growth and conidia formation. Together, these findings provide valuable information for further study on the biological roles of AoNramp1 in A. oryzae.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-02998-z.

A highly efficient identification of mutants generated by CRISPR/Cas9 using the non‑functional DsRed assisted selection in Aspergillus oryzae

The CRISPR/Cas9 system has become a great tool for target gene knock-out in filamentous fungi. It is laborious and time-consuming that identification mutants from a large number of transformants through PCR or enzyme-cut method. Here, we first developed a CRISPR/Cas9 system in Aspergillus oryzae using AMA1-based autonomously replicating plasmid and Cas9 under the control of the Aspergillus nidulans gpdA promoter. By the genome editing technique, we successfully obtained mutations within each target gene in Aspergillus oryzae. Then, we put the protospacer sequence of a target gene and its protospacer adjacent motif (PAM) behind the start codon "ATG" of DsRed, yielding the non‑functional DsRed (nDsRed) reporter gene, and the nDsRed reporter gene could be rescued after successful targeted editing. Moreover, this method was also applied by targeting the kojic acid synthesis gene kojA, and the transformants with DsRed activity were found to harbor targeted mutations in kojA. These results suggest that the nDsRed can be used as a powerful tool to facilitate the identification of mutants generated by CRISPR/Cas9 in Aspergillus oryzae.

The ancient koji mold (Aspergillus oryzae) as a modern biotechnological tool

Aspergillus oryzae (A. oryzae) is a filamentous micro-fungus that is used from centuries in fermentation of different foods in many countries all over the world. This valuable fungus is also a rich source of many bioactive secondary metabolites. Moreover, A. oryzae has a prestigious secretory system that allows it to secrete high concentrations of proteins into its culturing medium, which support its use as biotechnological tool in veterinary, food, pharmaceutical, and industrial fields. This review aims to highlight the significance of this valuable fungus in food industry, showing its generosity in production of nutritional and bioactive metabolites that enrich food fermented by it. Also, using A. oryzae as a biotechnological tool in the field of enzymes production was described. Furthermore, domestication, functional genomics, and contributions of A. oryzae in functional production of human pharmaceutical proteins were presented. Finally, future prospects in order to get more benefits from A. oryzae were discussed.

Development of a new Agrobacterium-mediated transformation system based on a dual auxotrophic approach in the filamentous fungus Aspergillus oryzae

Genetic engineering of the filamentous fungus Aspergillus oryzae still requires more suitable selection markers for fungal transformation. Our previous work has shown that Agrobacterium tumefaciens-mediated transformation (ATMT) based on the uridine/uracil auxotrophic mechanism with pyrG as the selection marker is very efficient for gene transfer in A. oryzae. In the present study, we delete the hisB gene, which is essential for histidine biosynthesis, in A. oryzae via homologous recombination and demonstrate that hisB is a reliable selection marker for genetic transformation of this fungus. Under optimal conditions, the ATMT efficiency of the histidine auxotrophic A. oryzae reached 515 transformants per 10⁶ spores. Especially, we have succeeded in constructing a new ATMT system based on dual auxotrophic A. oryzae mutants with two different selection markers including hisB and pyrG. This dual auxotrophic ATMT system displayed a transformation efficiency of 232 transformants per 10⁶ spores for the hisB marker and 318 transformants per 10⁶ spores for the pyrG marker. By using these selectable markers, the co-expression of the DsRed and GFP fluorescent reporter genes was implemented in a single fungal strain. Furthermore, we could perform both the deletion and complementation of the laeA regulatory gene in the same strain of A. oryzae to examine its function. Conclusively, the ATMT system constructed in our work represents a promising genetic tool for studies on recombinant expression and gene function in the industrially important fungus A. oryzae.

Establishment of a new and efficient Agrobacterium-mediated transformation system in the nematicidal fungus Purpureocillium lilacinum

Purpureocillium lilacinum (formerly Paecilomyces lilacinus) is widely commercialized for controlling plant-parasitic nematodes and represents a potential cell factory for enzyme production. This nematicidal fungus is intrinsically resistant to common antifungal agents used for genetic transformation. Therefore, molecular investigations in P. lilacinum are still limited so far. In the present study, we have established a new Agrobacterium tumefaciens-mediated transformation (ATMT) system in P. lilacinum based on the uridine/uracil auxotrophic mechanism. Here, uridine/uracil auxotrophic mutants were simply generated via UV irradiation instead of a complicated genetic approach for the pyrG gene deletion. A stable uridine/uracil auxotrophic mutant was then selected as a recipient for fungal transformation. We further indicated that the pyrG gene from Aspergillus niger can be used as a selectable marker for genetic transformation of P. lilacinum. Under optimized conditions for ATMT, the transformation efficiency reached 2873 ± 224 transformants per 10⁶ spores. Using the constructed ATMT system, we succeeded in expressing the DsRed reporter gene in P. lilacinum. Additionally, we have identified a very promising mutant for chitinase production from a collection of T-DNA insertion transformants. This mutant possesses a special phenotype of hyper-branching mycelium and produces more conidia in comparison to the wild strain. Conclusively, our ATMT system can be exploited for overexpression of target genes or for T-DNA insertion mutagenesis in the agriculturally important fungus P. lilacinum. The genetic approach in the present work may also be applied for developing similar ATMT systems in other fungi, especially for fungi that their genome databases are currently not available.

Advances in Genetic Engineering Technology and Its Application in the Industrial Fungus Aspergillus oryzae

The filamentous fungus Aspergillus oryzae is an important strain in the traditional fermentation and food processing industries and is often used in the production of soy sauce, soybean paste, and liquor-making. In addition, A. oryzae has a strong capacity to secrete large amounts of hydrolytic enzymes; therefore, it has also been used in the enzyme industry as a cell factory for the production of numerous native and heterologous enzymes. However, the production and secretion of foreign proteins by A. oryzae are often limited by numerous bottlenecks that occur during transcription, translation, protein folding, translocation, degradation, transport, secretion, etc. The existence of these problems makes it difficult to achieve the desired target in the production of foreign proteins by A. oryzae. In recent years, with the decipherment of the whole genome sequence, basic research and genetic engineering technologies related to the production and utilization of A. oryzae have been well developed, such as the improvement of homologous recombination efficiency, application of selectable marker genes, development of large chromosome deletion technology, utilization of hyphal fusion techniques, and application of CRISPR/Cas9 genome editing systems. The development and establishment of these genetic engineering technologies provided a great deal of technical support for the industrial production and application of A. oryzae. This paper reviews the advances in basic research and genetic engineering technologies of the fermentation strain A. oryzae mentioned above to open up more effective ways and research space for the breeding of A. oryzae production strains in the future.

CRISPR/Cas9-based genome engineering: A new breakthrough in the genetic manipulation of filamentous fungi

Filamentous fungi have several industrial, environmental, and medical applications. However, they are rarely utilized owing to the limited availability of full-genome sequences and genetic manipulation tools. Since the recent discovery of the full-genome sequences for certain industrially important filamentous fungi, CRISPR/Cas9 technology has drawn attention for the efficient development of engineered strains of filamentous fungi. CRISPR/Cas9 genome editing has been successfully applied to diverse filamentous fungi. In this review, we briefly discuss the use of common genetic transformation techniques as well as CRISPR/Cas9-based systems in filamentous fungi. Furthermore, we describe potential limitations and challenges in the practical application of genome engineering of filamentous fungi. Finally, we provide suggestions and highlight future research prospects in the area.

Genetic Manipulation and Transformation Methods for Aspergillus spp

Species of the genus Aspergillus have a variety of effects on humans and have been considered industrial cell factories due to their prominent ability for manufacturing several products such as heterologous proteins, secondary metabolites, and organic acids. Scientists are trying to improve fungal strains and re-design metabolic processes through advanced genetic manipulation techniques and gene delivery systems to enhance their industrial efficiency and utility. In this review, we describe the current status of the genetic manipulation techniques and transformation methods for species of the genus Aspergillus. The host strains, selective markers, and experimental materials required for the genetic manipulation and fungal transformation are described in detail. Furthermore, the advantages and disadvantages of these techniques are described.

Global Sexual Fertility in the Opportunistic Pathogen Aspergillus fumigatus and Identification of New Supermater Strains

A sexual cycle in Aspergillus fumigatus was first described in 2009 with isolates from Dublin, Ireland. However, the extent to which worldwide isolates can undergo sexual reproduction has remained unclear. In this study a global collection of 131 isolates was established with a near 1:1 ratio of mating types. All isolates were crossed to MAT1-1 or MAT1-2 Irish strains, and a subset of isolates from different continents were crossed together. Ninety seven percent of isolates were found to produce cleistothecia with at least one mating partner, showing that sexual fertility is not limited to the Irish population but is a characteristic of global A. fumigatus. However, large variation was seen in numbers of cleistothecia produced per cross, suggesting differences in the possibility for genetic exchange between strains in nature. The majority of crosses produced ascospores with >50% germination rates, but with wide variation evident. A high temperature heat shock was required to induce ascospore germination. Finally, a new set of highly fertile MAT1-1 and MAT1-2 supermater strains were identified and pyrimidine auxotrophs generated for community use. Results provide insights into the potential for the A. fumigatus sexual cycle to generate genetic variation and allow gene flow of medically important traits.

Disruption or reduced expression of the orotidine-5'-decarboxylase gene pyrG increases citric acid production: a new discovery during recyclable genome editing in Aspergillus niger

Background

Aspergillus niger is a filamentous fungus used for the majority of global citric acid production. Recent developments in genome editing now enable biotechnologists to engineer and optimize A. niger. Currently, however, genetic-leads for maximizing citric acid titers in industrial A. niger isolates is limited.

Results

In this study, we try to engineer two citric acid A. niger production isolates, WT-D and D353, to serve as platform strains for future high-throughput genome engineering. Consequently, we used genome editing to simultaneously disrupt genes encoding the orotidine-5′-decarboxylase (pyrG) and non-homologous end-joining component (kusA) to enable use of the pyrG selection/counter selection system, and to elevate homologous recombination rates, respectively. During routine screening of these pyrG mutant strains, we unexpectedly observed a 2.17-fold increase in citric acid production when compared to the progenitor controls, indicating that inhibition of uridine/pyrimidine synthesis may increase citric acid titers. In order to further test this hypothesis, the pyrG gene was placed under the control of a tetracycline titratable cassette, which confirmed that reduced expression of this gene elevated citric acid titers in both shake flask and bioreactor fermentation. Subsequently, we conducted intracellular metabolomics analysis, which demonstrated that pyrG disruption enhanced the glycolysis flux and significantly improved abundance of citrate and its precursors.

Conclusions

In this study, we deliver two citric acid producing isolates which are amenable to high throughput genetic manipulation due to pyrG/kusA deletion. Strikingly, we demonstrate for the first time that A. niger pyrG is a promising genetic lead for generating citric acid hyper-producing strains. Our data support the hypothesis that uridine/pyrimidine biosynthetic pathway offer future avenues for strain engineering efforts.

Advances in targeting and heterologous expression of genes involved in the synthesis of fungal secondary metabolites

The revolutionary discovery of penicillin only marks the start of our exploration for valuable fungal natural products. Advanced genome sequencing technologies have translated the fungal genome into a huge reservoir of "recipes" - biosynthetic gene clusters (BGCs) - for biosynthesis. Studying complex fungal genetics demands specific gene manipulation strategies. This review summarizes the current progress in efficient gene targeting in fungal cells and heterologous expression systems for expressing fungal BGCs of fungal secondary metabolites.

Modulation of Fatty Acid Composition of Aspergillus oryzae in Response to Ethanol Stress

The koji mold Aspergillus oryzae is widely adopted for producing rice wine, wherein koji mold saccharifies rice starch and sake yeast ferments glucose to ethanol. During rice wine brewing, the accumulating ethanol becomes a major source of stress for A. oryzae, and there is a decline in hydrolysis efficiency. However, the protective mechanisms of A. oryzae against ethanol stress are poorly understood. In the present study, we demonstrate that ethanol adversity caused a significant inhibition of mycelium growth and conidia formation in A. oryzae, and this suppressive effect increased with ethanol concentration. Transmission electron microscopy analysis revealed that ethanol uptake triggered internal cellular perturbations, such as irregular nuclei and the aggregation of scattered vacuoles in A. oryzae cells. Metabolic analysis uncovered an increase in fatty acid unsaturation under high ethanol conditions, in which a large proportion of stearic acid was converted into linoleic acid, and the expression of related fatty acid desaturases was activated. Our results therefore improve the understanding of ethanol adaptation mechanisms in A. oryzae and offer target genes for ethanol tolerance enhancement via genetic engineering.

Mevalonate Diphosphate Decarboxylase MVD/Erg19 Is Required for Ergosterol Biosynthesis, Growth, Sporulation and Stress Tolerance in Aspergillus oryzae

Mevalonate diphosphate decarboxylase (MVD; EC 4.1.1.33) is a key enzyme of the mevalonic acid (MVA) pathway. In fungi, the MVA pathway functions as upstream of ergosterol biosynthesis, and MVD is also known as Erg19. Previously, we have identified Aoerg19 in Aspergillus oryzae using bioinformatic analysis. In this study, we showed that AoErg19 function is conserved using phylogenetic analysis and yeast complementation assay. Quantitative reverse transcription-PCR (qRT-PCR) indicated that Aoerg19 expression changed in different growth stages and under different forms of abiotic stress. Subcellular localization analysis showed that AoErg19 was located in the vacuole. Overexpression of Aoerg19 decreased the ergosterol content in A. oryzae, which may due to the feedback-mediated downregulation of Aoerg8. Consistent with the decrease in ergosterol content, both Aoerg19 overexpression and RNAi strains of A. oryzae are sensitive to abiotic stressors, including ergosterol biosynthesis inhibitor, temperature, salt and ethanol. Thus, we have identified the function of AoErg19 in A. oryzae, which may assist in genetic modification of MVA and the ergosterol biosynthesis pathway.

Functional Genomics of Aspergillus oryzae: Strategies and Progress

Aspergillus oryzae has been used for the production of traditional fermentation and has promising potential to produce primary and secondary metabolites. Due to the tough cell walls and high drug resistance of A. oryzae, functional genomic characterization studies are relatively limited. The exploitation of selection markers and genetic transformation methods are critical for improving A. oryzae fermentative strains. In this review, we describe the genome sequencing of various A. oryzae strains. Recently developed selection markers and transformation strategies are also described in detail, and the advantages and disadvantages of transformation methods are presented. Lastly, we introduce the recent progress on highlighted topics in A. oryzae functional genomics including conidiation, protein secretion and expression, and secondary metabolites, which will be beneficial for improving the application of A. oryzae to industrial production.

Optimization of Production Conditions for Protoplasts and Polyethylene Glycol-Mediated Transformation of Gaeumannomyces tritici

Take-all, caused by Gaeumannomyces tritici, is one of the most important wheat root diseases worldwide, as it results in serious yield losses. In this study, G. tritici was transformed to express the hygromycin B phosphotransferase using a combined protoplast and polyethylene glycol (PEG)-mediated transformation technique. Based on a series of single-factor experimental results, three major factors-temperature, enzyme lysis time, and concentration of the lysing enzyme-were selected as the independent variables, which were optimized using the response surface methodology. A higher protoplast yield of 9.83 × 10⁷ protoplasts/mL was observed, and the protoplast vitality was also high, reaching 96.27% after optimization. Protoplasts were isolated under the optimal conditions, with the highest transformation frequency (46⁻54 transformants/μg DNA). Polymerase chain reaction and Southern blotting detection indicated that the genes of hygromycin phosphotransferase were successfully inserted into the genome of G. tritici. An optimised PEG-mediated protoplast transformation system for G. tritici was established. The techniques and procedures described will lay the foundation for establishing a good mutation library of G. tritici and could be used to transform other fungi.

A highly efficient Agrobacterium tumefaciens-mediated transformation system for the postharvest pathogen Penicillium digitatum using DsRed and GFP to visualize citrus host colonization

Penicillium digitatum is a major postharvest pathogen of citrus crops. This fungus broadly spreads worldwide and causes green mold disease, which results in severe losses for citrus production. Understanding of the citrus infection by P. digitatum may help develop effective strategies for controlling this pathogen. In this study, we have characterized a virulent strain of P. digitatum isolated in Vietnam and established a highly efficient Agrobacterium tumefaciens-mediated transformation (ATMT) system for this fungal strain with two newly constructed binary vectors. These binary vectors harbor dominant selectable markers for hygromycin or nourseothricin resistance, and expression cassettes for the red fluorescent protein (DsRed) or the green fluorescent protein (GFP), respectively. Using the established ATMT system, the transformation efficiency of the Vietnamese strain could reach a very high yield of 1240±165 transformants per 10⁶ spores. Interestingly, we found that GFP is much better than DsRed for in situ visualization of citrus fruit colonization by the fungus. Additionally, we showed that the transformation system can also be used to generate T-DNA insertion mutants for screening non-pathogenic or less virulent strains. Our work provides a new platform including a virulent tropical strain of P. digitatum, an optimized ATMT method and two newly constructed binary vectors for investigation of the postharvest pathogen. This platform will help develop strategies to dissect molecular mechanisms of host-pathogen interactions in more detail as well as to identify potential genes of pathogenicity by either insertional mutagenesis or gene disruption in this important pathogenic fungus.