Algae as a green technology for heavy metals removal from various wastewater

Tire-derived compounds, phthalates, and trace metals in the Kiel Fjord (Germany)

Concerns about pollutants in the environment are increasing, with substances such as plastic additives drawing particular concern due to their potential harmful effects on organisms. This study investigates current levels of several contaminants in the Kiel Fjord. Some pose serious health risks to aquatic life. In September 2022, water and sediment samples were collected from fifteen stations across the inner and outer Kiel Fjord. The concentrations of selected phthalates, tire-derived compounds, and heavy metals were measured. Results indicate that the outer fjord has minimal contamination, while the inner fjord contains several hotspots with significant pollutant concentrations. For example, the highest levels of heavy metals were detected near Laboe and in deeper sediment layers (>6 cm) at Wik. The maximum concentrations of phthalates were observed near Laboe, with elevated levels also found near the city of Kiel and the Nord-Ostsee-Kanal. This study highlights the substantial anthropogenic impact on the region.

Innovative strategies for utilizing microalgae as dual-purpose biofertilizers and phycoremediators in agroecosystems

The increasing need for sustainable agricultural practices due to the overuse of chemical fertilizers has prompted interest in microalgae as biofertilizers. This review investigates the potential of microalgae as biofertilizers and phycoremediators within sustainable agroecosystems, addressing both soil fertility and wastewater management. Microalgae provide a dual benefit by absorbing excess nutrients and contaminants from wastewater, generating nutrient-rich biomass that can replace chemical fertilizers and support plant growth. Implementation strategies include cultivating microalgae in wastewater to offset production costs, using closed photobioreactor systems to enhance growth efficiency, and applying microalgal biomass directly to soil or crops. Additionally, microalgae extracts provide essential bioactive compounds, such as phytohormones and amino acids, that enhance plant growth and resilience. While microalgae offer an eco-friendly solution for nutrient recycling and crop productivity, challenges in scalability, production cost, and regulatory frameworks hinder widespread adoption. This review highlights the potential pathways and technological advancements necessary for integrating microalgae into sustainable agriculture, emphasizing the need for interdisciplinary collaboration and innovative approaches to overcome these barriers. Ultimately, microalgae biofertilizers represent a promising approach to reducing environmental impact and advancing sustainable farming practices.

Biosorption of heavy metals by microalgae: Hazardous side effects for marine organisms

Biosorption is nowadays recommended as an ecological and environmentally friendly alternative to remove metals from contaminated regions. Even in situ incubations of algae on the seabed are conducted to investigate potential future ways of reducing metal contamination. Our study investigated the negative effects on microorganisms when metal-enriched algae are released into the marine environment. We cultured the microalgae Nannochloropsis oceanica strain CCMP1779 with 13C/15N amended f/2 medium enriched with four different metals (cadmium, copper, zinc, lead) and fed the resulting metal-enriched microalgal biomass to Ammonia confertitesta (Rhizaria, Foraminifera) for two and six days. Our study is the first study dealing with the interaction of biosorbed metals and the metabolism of microorganisms. The effects of the uptake of these metal-enriched algae were recorded by evaluating carbon and nitrogen uptake. Examinations using transmission electron microscopy (TEM) were also carried out to better assess the condition of the foraminifera. Foraminifera fed with metal-enriched microalgae show reduced carbon uptake and increased nitrogen storage, indicating stress conditions. These observations suggest that trace metals can induce stress which damages cellular metabolism. Interestingly, no cytological changes in TEM analyses could be observed, which might be attributed to the relatively short incubation time.

Evaluation of Metal Accumulation in Escherichia coli Expressing SPL2 by Single-Cell Inductively Coupled Plasma Mass Spectrometry

Rare earth elements, comprising 17 elements including 15 lanthanides, are essential components in numerous high-tech applications. While physicochemical methods are commonly employed to remove toxic heavy metals (e.g., cadmium and mercury) from industrial wastewater, biological approaches offer increasingly attractive alternatives. Biomining, which utilizes microorganisms to extract valuable metals from ores and industrial wastes, and bioremediation, which leverages microorganisms to adsorb and transport metal ions into cells via active transport, provide eco-friendly solutions for resource recovery and environmental remediation. In this study, we investigated the potential of three recently identified lanthanide-binding proteins-SPL2, lanpepsy, and lanmodulin-for applications in these areas using single-cell inductively coupled plasma mass spectrometry (scICP-MS). Our results demonstrate that SPL2 exhibits superior characteristics for lanthanide and cadmium bioremediation. Heterologous expression of a cytosolic fragment of SPL2 in bacteria resulted in high expression levels and solubility. Single-cell ICP-MS analysis revealed that these recombinant bacteria accumulated lanthanum, cobalt, nickel, and cadmium, effectively sequestering lanthanum and cadmium from the culture media. Furthermore, SPL2 expression conferred enhanced bacterial tolerance to cadmium exposure. These findings establish SPL2 as a promising candidate for developing recombinant bacterial systems for heavy metal bioremediation and rare earth element biomining.

Waste-derived substrates in vertical-flow constructed wetlands for an efficient removal of high-concentration heavy metals

Contamination by heavy metals (HMs) in aquatic ecosystems is a worldwide issue. Therefore, a feasible solution is crucial for underdeveloped and developing countries. Waste-derived materials (WDMs) exhibit unique physical and chemical properties that promote diverse mechanisms for the removal of HMs in constructed wetlands (CWs). In this study, we aimed to report the removal efficiency of HMs of vertical-flow constructed wetland (VFCW) systems using different WDMs, such as clinker brick (Jhama), eggshells, and date palm fiber (DPF). Synthetic wastewater with high concentrations (3.3-61.8) mg/L of HMs (As, Cr, Cd, Pb, Fe, Zn, Cu, and Ni) was applied to the systems followed by 3 days of hydraulic retention time. The results demonstrate that removal efficiencies of HMs ranged between 94.8 and 98.7% for DPF, 95.4-98.5% for eggshells, and 79.9-92.9% for the Jhama-filled CWs, while the gravel-based systems were capable of 73-87.6% removal. Two macrophytes, Canna indica and Hymenocallis littoralis were planted in the CWs and exhibited significant accumulation of HMs in their roots. The study reports that WDMs are effective for concentrated HM removal in CWs, and macrophytes demonstrate significant phytoremediation capabilities. The findings of this study will facilitate the economically feasible and efficient design of CWs for effectively treating concentrated HMs in wastewater.

Valorisation of acid mine drainage: Studying biosorption and bioaccumulation of rare earth elements by seaweeds

Acid mine drainage (AMD) nature, persistence and the considerable amount of toxic elements cause significant environmental damage. Traditional passive treatment systems typically focus on neutralizing AMD using limestone and removing common toxic metal(loid)s, and often overlook the recovery of economic and strategic elements (e.g., rare earth elements (REEs)). This study is aimed at assessing for the first time the use of seaweeds to remove REEs from AMD, transforming an environmental problem into a resource. The ability of three seaweed species (Gracilaria sp., Ulva sp., and Fucus sp.) to remove REEs was studied in their dried (biosorption) and living (bioaccumulation) forms. Bioaccumulation was the most efficient process, with Gracilaria and Ulva species showing better performances (75 and 44 %, respectively), also removing over 60 % of Fe. Adjusting the pH of AMD with NaOH successfully separated unwanted elements with minimal REEs loss. After pH adjustment, REEs removal did not improve for either species, except for Dy removal. Seaweed dosage was crucial for a higher REEs removal, with Gracilaria sp. showing a higher bioconcentration factor (up to 1470). FTIR and SEM-EDS analysis identified sulphonate, carboxyl, and alkyne groups as key in binding elements to Gracilaria sp. biomass. Overall, the results demonstrate that seaweed-based biotechnologies are a promising alternative for treating AMD and recovering valuable elements, which can be easily incorporated into the current passive treatment systems.

Optimizing collagen-based biomaterials for periodontal regeneration: clinical opportunities and challenges

Periodontal disease (PD) is a chronic inflammatory condition that affects the teeth and their supporting tissues, ultimately culminating in tooth loss. Currently, treatment modalities, such as systemic and local administration of antibiotics, serve to mitigate the progression of inflammation yet fall short in restoring the original anatomical structure and physiological function of periodontal tissues. Biocompatible material-based tissue engineering seems to be a promising therapeutic strategy for treating PD. Collagen, a component of the extracellular matrix commonly used for tissue engineering, has been regarded as a promising biogenic material for tissue regeneration owing to its high cell-activating and biocompatible properties. The structural and chemical similarities between collagen and components of the oral tissue extracellular matrix render it a promising candidate for dental regeneration. This review explored the properties of collagen and its current applications in periodontal regeneration. We also discussed the recent progression in collagen therapies and preparation techniques. The review also scrutinizes the pros and cons associated with the application of collagen-based biomaterials in PD treatment, aiming to pave the way for future applications of collagen-based biomaterials in the management of PD.

Removal of Heavy Metals from Wastewaters and Other Aqueous Streams by Pressure-Driven Membrane Technologies: An Outlook on Reverse Osmosis, Nanofiltration, Ultrafiltration and Microfiltration Potential from a Bibliometric Analysis

A bibliometric study to analyze the scientific documents released until 2024 in the database Scopus related to the use of pressure-driven membrane technologies (microfiltration, ultrafiltration, nanofiltration and reverse osmosis) for heavy metal removal was conducted. The work aimed to assess the primary quantitative attributes of the research in this field during the specified period. A total of 2205 documents were identified, and the corresponding analysis indicated an exponential growth in the number of publications over time. The contribution of the three most productive countries (China, India and USA) accounts for more than 47.1% of the total number of publications, with Chinese institutions appearing as the most productive ones. Environmental Science was the most frequent knowledge category (51.9% contribution), followed by Chemistry and Chemical Engineering. The relative frequency of the keywords and a complete bibliometric network analysis allowed the conclusion that the low-pressure technologies (microfiltration and ultrafiltration) have been more deeply investigated than the high-pressure technologies (nanofiltration and reverse osmosis). Although porous low-pressure membranes are not adequate for the removal of dissolved heavy metals in ionic forms, the incorporation of embedded adsorbents within the membrane structure and the use of auxiliary chemicals to form metallic complexes or micelles that can be retained by this type of membrane are promising approaches. High-pressure membranes can achieve rejection percentages above 90% (99% in the case of reverse osmosis), but they imply lower permeate productivity and higher costs due to the required pressure gradients.

Progress in the Sustainable Development of Biobased (Nano)materials for Application in Water Treatment Technologies

Water pollution remains a widespread problem, affecting the health and wellbeing of people around the globe. While current advancements in wastewater treatment and desalination show promise, there are still challenges that need to be overcome to make these technologies commercially viable. Nanotechnology plays a pivotal role in water purification and desalination processes today. However, the release of nanoparticles (NPs) into the environment without proper safeguards can lead to both physical and chemical toxicity. Moreover, many methods of NP synthesis are expensive and not environmentally sustainable. The utilization of biomass as a source for the production of NPs has the potential to mitigate issues pertaining to cost, sustainability, and pollution. The utilization of biobased nanomaterials (bio-NMs) sourced from biomass has garnered attention in the field of water purification due to their cost-effectiveness, biocompatibility, and biodegradability. Several research studies have been conducted to efficiently produce NPs (both inorganic and organic) from biomass for applications in wastewater treatment. Biosynthesized materials such as zinc oxide NPs, phytogenic magnetic NPs, biopolymer-coated metal NPs, cellulose nanocrystals, and silver NPs, among others, have demonstrated efficacy in enhancing the process of water purification. The utilization of environmentally friendly NPs presents a viable option for enhancing the efficiency and sustainability of water pollution eradication. The present review delves into the topic of biomass, its origins, and the methods by which it can be transformed into NPs utilizing an environmentally sustainable approach. The present study will examine the utilization of greener NPs in contemporary wastewater and desalination technologies.

Microbial strategies for copper pollution remediation: Mechanistic insights and recent advances

Environmental contamination is aninsistent concern affecting human health and the ecosystem. Wastewater, containing heavy metals from industrial activities, significantly contributes to escalating water pollution. These metals can bioaccumulate in food chains, posing health risks even at low concentrations. Copper (Cu), an essential micronutrient, becomes toxic at high levels. Activities like mining and fungicide use have led to Copper contamination in soil, water, and sediment beyond safe levels. Copper widely used in industries, demands restraint of heavy metal ion release into wastewater for ecosystem ultrafiltration, membrane filtration, nanofiltration, and reverse osmosis, combat heavy metal pollution, with emphasis on copper.Physical and chemical approaches are efficient, large-scale feasibility may have drawbackssuch as they are costly, result in the production of sludge. In contrast, bioremediation, microbial intervention offers eco-friendly solutions for copper-contaminated soil. Bacteria and fungi facilitate these bioremediation avenues as cost-effective alternatives. This review article emphasizes on physical, chemical, and biological methods for removal of copper from the wastewater as well asdetailing microorganism's mechanisms to mobilize or immobilize copper in wastewater and soil.

Supplementation of micro-nutrients to growth media of microalgae-induced biomass and fatty acids composition for clean energy generation

The presence of harmful heavy metals (HMs) in the aquatic environment can damage the environment and threaten human health. Traditional remediation techniques can have secondary impacts. Thus, more sustainable approaches must be developed. Microalgae have biological properties (such as high photosynthetic efficiency and growth), which are of great advantage in the HMs removal. In this study, the effect of various concentrations (2×, 4×, and 6×) of copper (Cu), cobalt (Co), and zinc (Zn) on microalgae (C. sorokiniana GEEL-01, P. kessleri GEEL-02, D. asymmetricus GEEL-05) was investigated. The microalgal growth kinetics, HMs removal, total nitrogen (TN), total phosphor (TP), and fatty acids (FAs) compositions were analyzed. The highest growth of 1.474 OD680nm and 1.348 OD680nm was obtained at 2× and 4×, respectively, for P. kessleri GEEL-02. P. kessleri GEEL-02 showed high removal efficiency of Cu, Co, and Zn (38.92-55.44%), (36.27-68.38%), and (32.94-51.71%), respectively. Fatty acids (FAs) analysis showed that saturated FAs in C. sorokiniana GEEL-01 and P. kessleri GEEL-02 increased at 2× and 4× concentrations while decreasing at 6×. For P. kessleri GEEL-02, the properties of biodiesel including the degree of unsaturation (UD) and cetane value (CN) increased at 2×, 4×, and 6× as compared to the control. Thus, this study demonstrated that the three microalgae (particularly P. kessleri GEEL-02) are more suitable for nutrient and HMs removal coupled with biomass/biodiesel production.

Phycoremediation of heavy metals and production of biofuel from generated algal biomass: a review

Due to human activity and natural processes, heavy metal contamination frequently affects the earth's water resources. The pollution can be categorized as resistant and persistent since it poses a significant risk to terrestrial and marine biological systems and human health. Because of this, several appeals and demands have been made worldwide to try and clean up these contaminants. Through bioremediation, algal cells are frequently employed to adsorb and eliminate heavy metals from the environment. Bioremediation is seen as a desirable strategy with few adverse effects and low cost. Activities and procedures for bioremediation involving algal cells depend on various environmental factors, including salinity, pH, temperature, the concentration of heavy metals, the amount of alga biomass, and food availability. Additionally, the effectiveness of removing heavy metals from the environment by assessing how environmental circumstances affect algal activities. The main issues discussed are (1) heavy metal pollution of water bodies, the role of algal cells in heavy metal removal, the methods by which algae cells take up and store heavy metals, and the process of turning the algae biomass produced into biofuel. (2) To overcome the environmental factors and improve heavy metals bioremediation, many strategies are applied, such as immobilizing the cells, consortium culture, and using dry mass rather than living cells. (3) The processes for converting produced algal biomass into biofuels like biodiesel and biomethanol. The present study discusses the life cycle assessment and the limitations of biofuel products from algae biomass.

Application of amino-hypophosphite polyampholyte for purification of wastewater containing Ni(ii) ions

This study investigated the sorption of Ni(ii) ions from an aqueous solution using novel, synthetic amino-hypophosphite polyampholyte resin (AHP) in a batch adsorption system. The removal of Ni(ii) ions was determined as a function of pH (2.0-8.0), initial concentration of Ni(ii) ions (2.0-20.0 mM), resin dosage (1.0-10.0 g dm-3), contact time (0.04-24 h), and temperature (298-318 K). Moreover, continuous fixed-bed column sorption was also studied using model solutions and actual wastewater from the galvanising plant. The batch sorption experimental data showed that the maximum pH for efficient Ni(ii) ion removal was about 5.0. An equilibrium was reached after about 24 hours. The kinetics results were fitted using pseudo-first-order (PFO), pseudo-second-order (PSO), liquid film (LFD), and intraparticle diffusion (IPD) models. Freundlich and Langmuir isotherm models were applied for sorption equilibrium data. The maximum sorption capacity was obtained from the Langmuir equation to be 2.39, 2.52, and 2.62 mmol g-1 at 298, 308, and 318 K, respectively. The thermodynamic parameters for the sorption of Ni(ii) ions on AHP imply the endothermic and spontaneous character of the process. The experimental results demonstrated that amino-hypophosphite polyampholyte resin could be used to effectively remove Ni(ii) ions from model solutions and real wastewater.

Roles and significance of chelating agents for potentially toxic elements (PTEs) phytoremediation in soil: A review

Phytoremediation is a biological remediation technique known for low-cost technology and environmentally friendly approach, which employs plants to extract, stabilise, and transform various compounds, such as potentially toxic elements (PTEs), in the soil or water. Recent developments in utilising chelating agents soil remediation have led to a renewed interest in chelate-induced phytoremediation. This review article summarises the roles of various chelating agents and the mechanisms of chelate-induced phytoremediation. This paper also discusses the recent findings on the impacts of chelating agents on PTEs uptake and plant growth and development in phytoremediation. It was found that the chelating agents have increased the rate of metal absorption and translocation up to 45% from roots to the aboveground plant parts during PTEs phytoremediation. Besides, it was also explored that the plants may experience some phytotoxicity after adding chelating agents to the soil. However, due to the leaching potential of synthetic chelating agents, the use of organic chelants have been explored to be used in PTEs phytoremediation. Finally, this paper also presents comprehensive insights on the significance of using chelating agents through SWOT analysis to discuss the advantages and limitations of chelate-induced phytoremediation.

Plants, animals, and fisheries waste-mediated bioremediation of contaminants of environmental and emerging concern (CEECs)-a circular bioresource utilization approach

The release of contaminants of environmental concern including heavy metals and metalloids, and contaminants of emerging concern including organic micropollutants from processing industries, pharmaceuticals, personal care, and anthropogenic sources, is a growing threat worldwide. Mitigating inorganic and organic contaminants, which can be coined as contaminants of environmental and emerging concern (CEECs), is a big challenge as traditional physicochemical processes are not economically viable for managing mixed contaminants of low concentrations. As a result, low-cost materials must be designed to provide high CEEC removal efficiency. One of the environmentally viable and energy-efficient approaches is biosorption, which involves using biomass or biopolymers isolated from plants or animals to decontaminate heavy metals in contaminated environments using inherent biological mechanisms. Among chemical constituents in plant biomass, cellulose, lignin, hemicellulose, proteins, polysaccharides, phenolic compounds, and animal biomass include polysaccharides and other compounds to bind heavy metals covalently and non-covalently. These functional groups include carboxyl, hydroxyl, carbonyl, amide, amine, and sulfhydryl. Cation-exchange capacities of these bioadsorbents can be improved by applying chemical modifications. The relevance of chemical constituents and bioactives in biosorbents derived from agricultural production such as food and fodder crops, bioenergy and cash crops, fruit and vegetable crops, medicinal and aromatic plants, plantation trees, aquatic and terrestrial weeds, and animal production such as dairy, goatery, poultry, duckery, and fisheries is highlighted in this comprehensive review for sequestering and bioremediation of CEECs, including as many as ten different heavy metals and metalloids co-contaminated with other organic micropollutants in circular bioresource utilization and one-health concepts.

Advancements in algal membrane bioreactors: Overcoming obstacles and harnessing potential for eliminating hazardous pollutants from wastewater

This paper offers a comprehensive analysis of algal-based membrane bioreactors (AMBRs) and their potential for removing hazardous and toxic contaminants from wastewater. Through an identification of contaminant types and sources, as well as an explanation of AMBR operating principles, this study sheds light on the promising capabilities of AMBRs in eliminating pollutants like nitrogen, phosphorus, and organic matter, while generating valuable biomass and energy. However, challenges and limitations, such as the need for process optimization and the risk of algal-bacterial imbalance, have been identified. To overcome these obstacles, strategies like mixed cultures and bioaugmentation techniques have been proposed. Furthermore, this study explores the wider applications of AMBRs beyond wastewater treatment, including the production of value-added products and the removal of emerging contaminants. The findings underscore the significance of factors such as appropriate algal-bacterial consortia selection, hydraulic and organic loading rate optimization, and environmental factor control for the success of AMBRs. A comprehensive understanding of these challenges and opportunities can pave the way for more efficient and effective wastewater treatment processes, which are crucial for safeguarding public health and the environment.

Isotherm and Kinetic Study of Metal Ions Sorption on Mustard Waste Biomass Functionalized with Polymeric Thiocarbamate

The presence of high concentrations of metal ions in effluents resulting from industrial metal coatings is a well-known fact. Most of the time, such metal ions, once they reach the environment, significantly contribute to its degradation. Therefore, it is essential that the concentration of metal ions is reduced (as much as possible) before such effluents are discharged into the environment to minimize the negative impact on the quality of the ecosystems. Among all methods that can be used to reduce the concentration of metal ions, sorption is one of the most viable options due to its high efficiency and low cost. Moreover, due to the fact that many industrial wastes have sorbent properties, this method is in accordance with the principles of circular economy. Based on these considerations, in this study, mustard waste biomass (resulting from oil extraction) was functionalized with an industrial polymeric thiocarbamate (METALSORB) and used as a sorbent to remove Cu(II), Zn(II) and Co(II) ions from aqueous media. The best conditions for the functionalization of mustard waste biomass were found to be: mixing ratio biomass: METASORB = 1 g: 1.0 mL and a temperature of 30 °C. The experimental sorption capacities of functionalized sorbent (MET-MWB) were 0.42 mmol/g for Cu(II), 0.29 mmol/g for Zn(II) and 0.47 mmol/g for Co(II), which were obtained under the following conditions: pH of 5.0, 5.0 g sorbent/L and a temperature of 21 °C. The modeling of isotherms and kinetic curves as well as the analysis of the results obtained from desorption processes demonstrate the usefulness of this sorbent in the treatment of effluents contaminated with metal ions. In addition, tests on real wastewater samples highlight the potential of MET-MWB for large-scale applications.

Biological and green remediation of heavy metal contaminated water and soils: A state-of-the-art review

Contamination of the natural ecosystem by heavy metals, organic pollutants, and hazardous waste severely impacts on health and survival of humans, animals, plants, and microorganisms. Diverse chemical and physical treatments are employed in many countries, however, the acceptance of these treatments are usually poor because of taking longer time, high cost, and ineffectiveness in contaminated areas with a very high level of metal contents. Bioremediation is an eco-friendly and efficient method of reclaiming contaminated soils and waters with heavy metals through biological mechanisms using potential microorganisms and plant species. Considering the high efficacy, low cost, and abundant availability of biological materials, particularly bacteria, algae, yeasts, and fungi, either in natural or genetically engineered (GE) form, bioremediation is receiving high attention for heavy metal removal. This report comprehensively reviews and critically discusses the biological and green remediation tactics, contemporary technological advances, and their principal applications either in-situ or ex-situ for the remediation of heavy metal contamination in soil and water. A modified PRISMA review protocol is adapted to critically assess the existing research gaps in heavy metals remediation using green and biological drivers. This study pioneers a schematic illustration of the underlying mechanisms of heavy metal bioremediation. Precisely, it pinpoints the research bottleneck during its real-world application as a low-cost and sustainable technology.

Green alga Chlamydomonas reinhardtii can effectively remove diclofenac from the water environment - A new perspective on biotransformation

The use of unicellular algae to remove xenobiotics (including drugs) from wastewaters is one of the rapidly developing areas of environmental protection. Numerous data indicate that for efficient phycoremediation three processes are important, i.e. biosorption, bioaccumulation, and biotransformation. Although biosorption and bioaccumulation do not raise any serious doubts, biotransformation is more problematic since its products can be potentially more toxic than the parent compounds posing a threat to organisms living in a given environment, including organisms that made this transformation. Thus, two questions need to be answered before the proper algae strain is chosen for phycoremediation, namely what metabolites are produced during biotransformation, and how resistant is the analyzed strain to a mixture of parent compound and metabolites that appear over the course of culture? In this work, we evaluated the remediation potential of the model green alga Chlamydomonas reinhardtii in relation to non-steroidal anti-inflammatory drugs (NSAIDs), as exemplified by diclofenac. To achieve this, we analysed the susceptibility of C. reinhardtii to diclofenac as well as its capability to biosorption, bioaccumulation, and biotransformation of the drug. We have found that even at a relatively high concentration of diclofenac the algae maintained their vitality and were able to remove (37.7%) DCF from the environment. A wide range of phase I and II metabolites of diclofenac (38 transformation products) was discovered, with many of them characteristic rather for animal and bacterial biochemical pathways than for plant metabolism. Due to such a large number of detected products, 18 of which were not previously reported, the proposed scheme of diclofenac transformation by C. reinhardtii not only significantly contributes to broadening the knowledge in this field, but also allows to suggest possible pathways of degradation of xenobiotics with a similar structure. It is worth pointing out that a decrease in the level of diclofenac in the media observed in this study cannot be fully explained by biotransformation (8.4%). The mass balance analysis indicates that other processes (total 22%), such as biosorption, a non-extractable residue formation, or complete decomposition in metabolic cycles can be involved in the diclofenac disappearance, and those findings open the prospects of further research.

Microalgal-induced remediation of wastewaters loaded with organic and inorganic pollutants: An overview

The recent surge in industrialization has intensified the accumulation of various types of organic and inorganic pollutants due to the illegal dumping of partially and/or untreated wastewater effluents in the environment. The pollutants emitted by several industries pose serious risk to the environment, animals and human beings. Management and diminution of these hazardous organic pollutants have become an incipient research interest. Traditional physiochemical methods are energy intensive and produce secondary pollutants. So, bioremediation via microalgae has appeared to be an eco-friendly and sustainable technique to curb the adverse effects of organic and inorganic contaminants because microalgae can degrade complex organic compounds and convert them into simpler and non-toxic substances without the release of secondary pollutants. Even some of the organic pollutants can be exploited by microalgae as a source of carbon in mixotrophic cultivation. Literature survey has revealed that use of the latest modification techniques for microalgae such as immobilization (on alginate, carrageena and agar), pigment-extraction, and pretreatment (with acids) have enhaced their bioremedial potential. Moreover, microalgal components i.e., biopolymers and extracellular polymeric substances (EPS) can potentially be exploited in the biosorption of pollutants. Though bioremediation of wastewaters by microalgae is quite well-studied realm but some aspects like structural and functional responses of microalgae toward pollutant derivatives/by-products (formed during biodegradation), use of genetic engineering to improve the tolerance of microalgae against higher concentrations of polluatans, and harvesting cost reduction, and monitoring of parameters at large-scale still need more focus. This review discusses the accumulation of different types of pollutants into the environment through various sources and the mechanisms used by microalgae to degrade commonly occurring organic and inorganic pollutants.

Removal and concurrent reduction of Cr(VI) by thermoacidophilic Cyanidiales: a novel extreme biomaterial enlightened for acidic and neutral conditions

Thermoacidophilic Cyanidiales maintain a competitive edge in inhabiting extreme environments enriched with metals. Here, species of Cyanidioschyzon merolae (Cm), Cyanidium caldarium (Cc), and Galdieria partita (Gp) were exploited to remove hexavalent chromium [Cr(VI)]. Cm and Gp could remove 168.1 and 93.7 mg g^-1 of Cr(VI) at pH 2.0 and 7.0, respectively, wherein 89% and 62% of sorbed Cr on Cm and Gp occurred as trivalent chromium [Cr(III)]. Apart from surface-sorbed Cr(VI), the in vitro Cr(III) bound with polysaccharide and in vivo chromium(III) hydroxide [Cr(OH)₃] attested to the reduction capability of Cyanidiales. The distribution of Cr species varied as a function of sorbed Cr amount, yet a relatively consistent proportion of Cr(OH)₃, irrespective of Cr sorption capacity, was found only on Cm and Cc at pH 2.0. In conjunction with TXM (transmission X-ray microscopy) images that showed less impaired cell integrity and possible intracellular Cr distribution on Cm and Cc at pH 2.0, the in vivo Cr(OH)₃ might be the key to promoting the Cr sorption capacity (≥ 152 mg g^-1). Cyanidiales are promising candidates for the green and sustainable remediation of Cr(VI) due to their great removal capacity, the spontaneous reduction under oxic conditions, and in vivo accumulation.

Application of multi-gene genetic programming technique for modeling and optimization of phycoremediation of Cr(VI) from wastewater

Background

Removal of Cr(VI) from wastewater is essential as it is potentially toxic and carcinogenic in nature. Bioremediation of heavy metals using microalgae is a novel technique and has several advantages such as microalgae remove metals in an environmentally friendly and economic manner. The present study deals with modeling and optimization of the phycoremediation of Cr(VI) from synthetic wastewater. The initial concentration of Cr(VI), initial pH, and inoculum size were considered as input factors, and the percentage removal of Cr(VI) was chosen as a response.

Results

An accurate data-driven genetic programming model was developed with the experimental data of other scientists to find a relation between the percentage removal of Cr(VI) and all input parameters. To maximize the removal of Cr(VI), the grey wolf optimization technique was applied to determine the optimal values of input parameters.

Conclusion

These optimum input parameters are difficult to get through experimentation using the trial-and-error method. The established modelling and optimization technique is generic and can be applied to any other experimental study.

Graphical Abstract

Phycoremediation for carbon neutrality and circular economy: Potential, trends, and challenges

Phycoremediation is gaining attention not only as a pollutant mitigation approach but also as one of the most cost-effective paths to achieve carbon neutrality. When compared to conventional treatment methods, phycoremediation is highly effective in removing noxious substances from wastewater and is inexpensive, eco-friendly, abundantly available, and has many other advantages. The process results in valuable bioproducts and bioenergy sources combined with pollutants capture, sequestration, and utilization. In this review, microalgae-based phycoremediation of various wastewaters for carbon neutrality and circular economy is analyzed scientometrically. Different mechanisms for pollutants removal and resource recovery from wastewaters are explained. Further, critical parameters that influence the engineering design and phycoremediation performance are described. A comprehensive knowledge map highlighting the microalgae potential to treat a variety of industrial effluents is also presented. Finally, challenges and future prospects for industrial implementation of phycoremediation towards carbon neutrality coupled with circular economy are discussed.

Rethinking quantified methods for arsenic speciation and risk in a biowaste hydrothermal liquefaction system

Controversy exists to quantify the fate and speciation of Arsenic (As). We investigated its characteristics by As-containing algae in various pH hydrothermal liquefaction (HTL) system, specifically via two classical methods, i.e. the European Community Bureau of Reference (BCR) and Wenzel's method. Solid residue immobilized 11.23-16.55% of As, and 88.07-82.44% was in aqueous by the pH regulators (e.g., CH₃COOH, HCl, and KOH). ICP-MS and XRD analysis revealed that As (V) was converted into As (III) and As (0) in the solid residue, while the As (V) was mainly converted into As (III) in the aqueous phase during HTL. When the classified forms of As in solid residue are compared, Wenzel's method was more appropriate for dividing the bio-availability forms of As, whereas BCR was better for estimating the toxic-potential forms of As. Subsequently, pH regulators raised the risk of As in solid residue associated with the increasing of unstable forms. The amide was hydrolyzed to carboxylic acid with acidic additives, which weakened the reducing environment in the HTL process. In contrast, the amide was hydrolyzed to ammonia with the alkaline additives, which enhanced the reducing environment and increased the risk of As in products. This work provided a new insight in systematically evaluating the risk and speciation of As in HTL.

Biosorption of heavy metals by microorganisms: Evaluation of different underlying mechanisms

Globally, ecotoxicologists, environmental biologists, biochemists, pathologists, and other experts are concerned about environmental contamination. Numerous pollutants, such as harmful heavy metals and emerging hazardous chemicals, are pervasive sources of water pollution. Water pollution and sustainable development have several eradication strategies proposed and used. Biosorption is a low-cost, easy-to-use, profitable, and efficient method of removing pollutants from water resources. Microorganisms are effective biosorbents, and their biosorption efficacy varies based on several aspects, such as ambient factors, sorbing materials, and metals to be removed. Microbial culture survival is also important. Biofilm agglomerates play an important function in metal uptake by extracellular polymeric molecules from water resources. This study investigates the occurrence of heavy metals, their removal by biosorption techniques, and the influence of variables such as those indicated above on biosorption performance. Ion exchange, complexation, precipitation, and physical adsorption are all components of biosorption. Between 20 and 35 °C is the optimal temperature range for biosorption efficiency from water resources. Utilizing living microorganisms that interact with the active functional groups found in the water contaminants might increase biosorption efficiency. This article discusses the negative impacts of microorganisms on living things and provides an outline of how they affect the elimination of heavy metals.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Effects of Salicylic Acid on Heavy Metal Resistance in Eukaryotic Algae and Its Mechanisms

Heavy metal pollution and water eutrophication are still the main issues to be solved in the environmental field. To find a biological control method for Cd²⁺-contaminated water or combined eutrophication and Cd²⁺ pollution water, the effects of salicylic acid on heavy metal Cd²⁺ resistance in eukaryotic algae Scenedesmus obliquus and Chlorella pyrenoidosa and its mechanisms were studied. The results showed that the inhibition rates of 3.0 mg/L Cd²⁺ stress group at 96 h were 67.0% on S. obliquus and 61.4% on C. pyrenoidosa and their uptake of Cd²⁺ was 0.31 mg/g and 0.35 mg/g, respectively. When adding the different concentrations of salicylic acid while stressed by 3.0 mg/L Cd²⁺, the hormesis phenomenon of low dose stimulation and high dose inhibition could be seen, and the inhibition rates of 30 mg/L~90 mg/L salicylic acid addition groups were significantly lower than those of the Cd²⁺ stress group alone, which were statistically significant (p < 0.05) and the absorption of Cd²⁺ was dramatically improved. Except for the 120 mg/L salicylic acid addition group, the chlorophyll fluorescence parameters (Fv/Fm and YII), glutathione peroxidase (GSH-Px) and glutathione-S-transferase (GST) activities of all the other concentration groups were significantly higher than those of the Cd²⁺ stress group alone, p < 0.05.; the algal cell morphology in low concentration groups (30 mg/L and 60 mg/L) was also less damaged than those in the Cd²⁺ stress group alone. These indicate that the low concentrations of salicylic acid can counteract or protect the algal cells from Cd²⁺ attack, the mechanisms, on the one hand, might be related to the chelation of heavy metals by salicylic acid, resulting in the decrease of the toxicity of Cd²⁺; on the other hand, low concentrations of salicylic acid can stimulate the growth of these two algae, improve their photosynthetic efficiency and antioxidant capacity, as well as maintain the relative integrity of algal morphological structure.

Recovery Strategies for Heavy Metal-Inhibited Biological Nitrogen Removal from Wastewater Treatment Plants: A Review

Biological nutrient removal is an integral part of a wastewater treatment plant. However, the microorganism responsible for nutrient removal is susceptible to inhibition by external toxicants such as heavy metals which have the potential to completely inhibit biological nutrient removal. The inhibition is a result of the interaction between heavy metals with the cell membrane and the deoxyribonucleic acid (DNA) of the cell. Several attempts, such as the addition of pretreatment steps, have been made to prevent heavy metals from entering the biological wastewater systems. However, the unexpected introduction of heavy metals into wastewater treatment plants result in the inhibition of the biological wastewater treatment systems. This necessitates the recovery of the biological process. The biological processes may be recovered naturally. However, the natural recovery takes time; additionally, the biological process may not be fully recovered under natural conditions. Several methods have been explored to catalyze the recovery process of the biological wastewater treatment process. Four methods have been discussed in this paper. These include the application of physical methods, chelating agents, external field energy, and biological accelerants. These methods are compared for their ability to catalase the process, as well as their environmental friendliness. The application of bio-accelerant was shown to be superior to other recovery strategies that were also reviewed in this paper. Furthermore, the application of external field energy has also been shown to accelerate the recovery process. Although EDTA has been gaining popularity as an alternative recovery strategy, chelating agents have been shown to harm the metal acquisition of bacteria, thereby affecting other metabolic processes that require heavy metals in small amounts. It was then concluded that understanding the mechanism of inhibition by specific heavy metals, and understanding the key microorganism in the inhibited process, is key to developing an effective recovery strategy.

Effect of heavy metals mixture on the growth and physiology of Tetraselmis sp.: Applications to lipid production and bioremediation

Phycoremediation of heavy metals from contaminated waters by oleaginous microalgae is an eco-friendly and emerging trend. Different concentrations of toxic metals such as nickel (Ni), chromium (Cr) and cobalt (Co) were added in Tetraselmis sp. culture media. Mixture Design was used to model the effect of these metals on cell growth, lipid production and heavy metals removal. Tetraselmis sp. was identified as an outstanding Ni, Cr and Co accumulator with bioconcentration factors of 675.17, 584.9 and 169.81 within binary mixtures (Ni × Cr), (Cr × Co) and (Cr × Co) at 6 mg/L, respectively. Optimization studies showed that the highest cell growth (9.22 × 10⁵ cells/mL), lipid content (31% Dry Weight) and metals removal (91%) were obtained with the optimum binary mixture Ni (54.45 %) and Cr (45.45 %). This work presents interesting results revealing the potential of Tetraselmis sp. for nickel removal up to 97 % combined to its potential for biodiesel production.

Formulation of Novel Composite (Activated Nanoclay/Hydrocolloid of Nostoc sphaericum) and Its Application in the Removal of Heavy Metals from Wastewater

The removal of heavy metals from wastewater is an environmental challenge which demands the use of environmentally friendly materials that promote a circular economy. This study aimed to apply a novel composite of an activated nanoclay/hydrocolloid in the removal of heavy metals from wastewater. A composite blended under pressure was prepared with spray-dried hydrocolloid derived from Nostoc sphaericum algae and activated nanoclay in an acid medium and 1M NaCl. The composite and components were analyzed through infrared (IR), X-ray (XR), ζ potential, cation exchange capacity (CEC), particle size, and SEM images. The composite was subjected to the adsorption of heavy metals (Pb, As, Zn, and Cd) at pH 4.5 and the removal percentage, kinetics, and adsorption isotherms were evaluated. It was observed that the activated nanoclay and the composite that presented a particle size of around 400 nm significantly increased (p-value < 0.05) the CEC, ζ potential, the functional groups, and chelating components, removing heavy metals above 99% for Pb, As 33%, Cd 15%, and Zn 10%. Adsorption kinetics was adjusted to the pseudo second-order model (R2 > 0.98), and the Langmuir and Freundlich models better represented the sorption isotherm at 20 °C. The formulated composite presents a good ability to remove heavy metals in wastewater.

Pharmaceuticals in the Aquatic Environment: A Review on Eco-Toxicology and the Remediation Potential of Algae

The pollution of the aquatic environment has become a worldwide problem. The widespread use of pesticides, heavy metals and pharmaceuticals through anthropogenic activities has increased the emission of such contaminants into wastewater. Pharmaceuticals constitute a significant class of aquatic contaminants and can seriously threaten the health of non-target organisms. No strict legal regulations on the consumption and release of pharmaceuticals into water bodies have been implemented on a global scale. Different conventional wastewater treatments are not well-designed to remove emerging contaminants from wastewater with high efficiency. Therefore, particular attention has been paid to the phycoremediation technique, which seems to be a promising choice as a low-cost and environment-friendly wastewater treatment. This technique uses macro- or micro-algae for the removal or biotransformation of pollutants and is constantly being developed to cope with the issue of wastewater contamination. The aims of this review are: (i) to examine the occurrence of pharmaceuticals in water, and their toxicity on non-target organisms and to describe the inefficient conventional wastewater treatments; (ii) present cost-efficient algal-based techniques of contamination removal; (iii) to characterize types of algae cultivation systems; and (iv) to describe the challenges and advantages of phycoremediation.

Phycoremediation of textile effluents with enhanced efficacy of biodiesel production by algae and potential use of remediated effluent for improving growth of wheat

The uncontrolled industrialization and unrestricted textile production combined with inappropriate effluent treatment services in developing countries like Pakistan have multiplied the number of harmful effluent discharge. These effluents are enriched with dyes, heavy metal ions, and other hazardous materials that are poisonous and carcinogenic to living organisms. For that reason, the utilization of economic and efficient control techniques against such pollutants is imperative to protect natural resources. The triple algal role for phycoremediation of textile effluent was utilized in this study to make it suitable for irrigation and higher biofuel production. Locally isolated two strains, CKW1 (Spirogyra sp.) and PKS33 (Cladophora sp.), were used to treat the effluent collected from the direct outlets of the textile industries. The treated effluent was then tested for its toxicity and applied to wheat at initial stage grown under axenic conditions to check its effect on wheat (Triticum aestivum L.) vegetative growth and development. Finally, the algal biomass obtained after treatment was subjected to trans-esterification for predicting the amount of biodiesel production. Study outcomes revealed that the algal strains were able to decolorize the effluent entirely within 96-120 h. Compared to un-treated textile effluent, the phycoremediated wastewater application to wheat plants enhanced the plant biomass by 80%. Lastly, the production of biodiesel from algal biomass attained after phycoremediation was 35% less to algal biomass obtained under normal growth conditions. It can be concluded that the algal use helps to treat the contaminated effluent and marks them re-usable for irrigating plants and producing biomass which could be utilized for biodiesel production.

Hydrous ferric oxides (HFO's) precipitated from contaminated waters at several abandoned Sb deposits - Interdisciplinary assessment

The presented paper represents a comprehensive analysis of ochre sediments precipitated from Fe rich drainage waters contaminated by arsenic and antimony. Ochre samples from three abandoned Sb deposits were collected in three different seasons and were characterized from the mineralogical, geochemical, and microbiological point of view. They were formed mainly by poorly crystallized 2-line ferrihydrite, with the content of arsenic in samples ranging from 7 g·kg^-1 to 130 g·kg^-1 and content of antimony ranging from 0.25 g·kg^-1 up to 12 g·kg^-1. Next-generation sequencing approach with 16S RNA, 18S RNA and ITS markers was used to characterize bacterial, fungal, algal, metazoal and protozoal communities occurring in the HFOs. In the 16S RNA, the analysis dominated bacteria (96.2%) were mainly Proteobacteria (68.8%) and Bacteroidetes (10.2%) and to less extent also Acidobacteria, Actinobacteria, Cyanobacteria, Firmicutes, Nitrosprae and Chloroflexi. Alpha and beta diversity analysis revealed that the bacterial communities of individual sites do not differ significantly, and only subtle seasonal changes were observed. In this As and Sb rich, circumneutral microenvironment, rich in iron, sulfates and carbonates, methylotrophic bacteria (Methylobacter, Methylotenera), metal/reducing bacteria (Geobacter, Rhodoferax), metal-oxidizing and denitrifying bacteria (Gallionella, Azospira, Sphingopyxis, Leptothrix and Dechloromonas), sulfur-oxidizing bacteria (Sulfuricurvum, Desulphobulbaceae) and nitrifying bacteria (Nitrospira, Nitrosospira) accounted for the most dominant ecological groups and their impact over Fe, As, Sb, sulfur and nitrogen geocycles is discussed. This study provides evidence of diverse microbial communities that exist in drainage waters and are highly important in the process of mobilization or immobilization of the potentially toxic elements.

Emerging microalgae-based technologies in biorefinery and risk assessment issues: Bioeconomy for sustainable development

Industrial wastewater treatment is of paramount importance considering the safety of the aquatic ecosystem and its associated health risk to humankind inhabiting near the water bodies. Microalgae-based technologies for remediation of environmental pollutants present avenues for bioenergy applications and production of value-added biochemicals having pharmaceutical, nutraceutical, antioxidants, carbohydrate, phenolics, long-chain multi-faceted fatty acids, enzymes, and proteins which are considered healthy supplements for human health. Such a wide range of products put up a good case for the biorefinery concept. Microalgae play a pivotal role in degrading complex pollutants, such as organic and inorganic contaminants thereby efficiently removing them from the environment. In addition, microalgal species, such as Botryococcus braunii, Tetraselmis suecica, Phaeodactylum tricornutum, Neochloris oleoabundans, Chlorella vulgaris, Arthrospira, Chlorella, and Tetraselmis sp., etc., are also reported for generation of value-added products. This review presents a holistic view of microalgae based biorefinery starting from cultivation and harvesting of microalgae, the potential for remediation of environmental pollutants, bioenergy application, and production of value-added biomolecules. Further, it summarizes the current understanding of microalgae-based technologies and discusses the risks involved, potential for bioeconomy, and outlines future research directions.

Study on the mechanism of biochar loaded typical microalgae Chlorella removal of cadmium

Coconut shell activated carbon (Csac) is one of the most widely used materials to remove cadmium (Cd) from contaminated water. A large diversity of microorganisms exists in various aquatic systems and may aid Cd removal by Csac. In this study, we explored the reactions of Csac with microalgae (Chlorella) in Cd-containing media. The results of scanning electron microscope (SEM) imaging, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), superconducting pulse-Fourier transform nuclear magnetic resonance (pulse-FT NMR) and X-ray photoelectron spectroscopy (XPS) indicated that Chlorella could adhere in the micropores of Csac formed Csac@Chlorella composite adsorbent loading Chlorella. Furthermore, the composite adsorbent surface had abundant functional groups such -COOH, -OH and C-O-C, which served as active sites during the adsorption process. Compared with Csac, Csac@Chlorella had an enhanced Cd adsorption capacity evidently. The results showed that pH 8, 0.2 g Csac, OD₆₈₀ of 0.1 for Chlorella were optimal conditions for maximum Cd adsorption capacity within one hour contact time. Furthermore, the Cd adsorption process was well described by the pseudo-second-order and Langmuir adsorption isotherm models. The models revealed that the adsorption process was mainly based on chemical adsorption of a single molecular layer, accompanied by electrostatic attraction, complexation and intracellular adsorption, amongst other parameters. Collectively, the findings illustrate that the microalgae (Chlorella)-Csac-Cd interaction is complex and will thus have immense interest to a broad range of biological, environmental, and geoscience communities.

Application of Saccharomyces cerevisiae in the Biosorption of Co(II), Zn(II) and Cu(II) Ions from Aqueous Media

Yeast biomass is considered a low-cost material that can be successfully used for the biosorption of metal ions from aqueous solution, due to its structural characteristics. This study evaluates the biosorptive performance of Saccharomyces cerevisiae in the biosorption of Co(II), Zn(II) and Cu(II) ions from aqueous media in batch mono-component systems. The influence of solution pH, biosorbent dose, contact time, temperature and initial metal ions concentration was examined step by step, to obtain the optimal conditions for biosorption experiments. Maximum uptake efficiency for all metal ions on this biosorbent was obtained at: pH = 5.0, 4.0 g biosorbent/L, room temperature of 23 °C, and a contact time of 60 min, and these were considered optimal. The equilibrium results were analyzed using Langmuir, Freundlich and Dubinin–Radushkevich isotherm models, while for the modeling of the kinetics data, three models (pseudo-first order, pseudo-second order and intra-particle diffusion) were used. Dubinin–Radushkevich isotherm model and the pseudo-second order model showed the best fit with the experimental data obtained at biosorption of Co(II), Zn(II) and Cu(II) ions on Saccharomyces cerevisiae. Both maximum biosorption capacities and pseudo-second rate constants follow the order: Co(II) > Zn(II) > Cu(II), suggesting that the structural particularities of metal ions are important in the biosorption processes. Based on the obtained equilibrium and kinetic parameters, the biosorption mechanism is analyzed and the possible applications are emphasized.

Single toxicity of arsenic and combined trace metal exposure to a microalga of ecological and commercial interest: Diacronema lutheri

Eco-toxicological assays with species of economic interest such as Diacronema lutheri are essential for industries that produce aquaculture feed, natural food additives and also in drug developing industries. Our study involved the exposure of a single and combined toxicity of arsenic (As V) to D. lutheri for the entire algal growth phase and highlighted that a combined exposure of As V with other essential (Copper, Cu; Nickel, Ni) and non-essential (Cadmium, Cd; Lead, Pb) trace metals reduced significantly the cell number, chlorophyll a content, and also significantly increased the de-epoxidation ratio (DR) as a stress response when compared to the single toxicity of As V. Arsenic, as one of the ubiquitous trace metal and an active industrial effluent is reported to have an increased bio-concentration factor when in mixture with other trace metals in this study. In the combined exposure, the concentration of total As bio-accumulated by D. lutheri was higher than in the single exposure. Hence, polluted areas with the prevalence of multiple contaminants along with the highly toxic trace metals like As can impose a greater risk to the exposed organisms that may get further bio-magnified in the food chain. Our study highlights the consequences and the response of D. lutheri in terms of contamination from single and multiple trace metals in order to obtain a safer biomass production for the growing need of natural derivatives.

Utilization of Chlorella pyrenoidosa for Remediation of Common Effluent Treatment Plant Wastewater in Coupling with Co-relational Study: An Experimental Approach

Earlier investigations on biological methods of wastewater treatment have revealed that algal based wastewater treatment could be a green, cost effective and efficient approach for the removal of heavy metals. So, this study aimed to assess the potential of microalga Chlorella pyrenoidosa for remediation of heavy metals (Cr, Cu, Pb, Zn, Cd, Mn, and Ni) from varying concentration (25%, 50%, 75 and 100%) of wastewater collected from Common Effluent Treatment Plant. Heavy metals such as Cr, Cu, Pb, Zn, Cd, Mn, and Ni have been removed significantly from the wastewater, with percentage removal ranging from 73%, 60%, 75%, 66%, 87%, 83%, and 74% with 50% test solution, 57%, 59%, 70%, 56%, 72%, 66%, and 62% with 75% test solution, and 47%, 55%, 56%, 71%, 61%, 77%, and 72% with 100% test solution respectively. Studies on biochemical assay (protein, carbohydrate, and pigment) of Chlorella pyrenoidosa were also an important part of the present investigation to understand the interaction of heavy metals with algal biochemical compounds using Pearson correlation co-efficient. Biomass grown in CETP wastewater can be used for synthesis of various fruitful value-added end products like bio-diesel, pharmaceutical products, cosmetic products, bio-adsorbent etc.

A Review on the Reliability and the Readiness Level of Microalgae-Based Nutrient Recovery Technologies for Secondary Treated Effluent in Municipal Wastewater Treatment Plants

Algae-based wastewater treatment technologies are promising green technologies with huge economical potential and environmental co-benefits. However, despite the immense research, work, and achievement, no publications were found wherein these technologies have been successfully applied in an operational environment for nitrogen and phosphorus removal of secondary treated effluent in municipal wastewater treatment plants. Based on a literature review and targeted comprehensive analysis, the paper seeks to identify the main reasons for this. The reliability (considering inlet wastewater quality variations, operating conditions and process control, algae harvesting method, and produced biomass) as well as the technology readiness level for five types of reactors are discussed. The review shows that the reactors with a higher level of control over the technological parameters are more reliable but algal post-treatment harvesting and additional costs are barriers for their deployment. The least reliable systems continue to be attractive for research due to the non-complex operation and relieved expenditure costs. The rotating biofilm systems are currently undertaking serious development due to their promising features. Among the remaining research gaps and challenges for all the reactor types are the identification of the optimal algal strains, establishment of technological parameters, overcoming seasonal variations in the effluent’s quality, and biomass harvesting.

Microalgal bioremediation of heavy metal pollution in water: Recent advances, challenges, and prospects

With the rapid economy development and population surge, the water resources available for direct use on the earth have been in shortage. Therefore, water pollution remediation inevitably becomes the focus of global attention. Aside from their capacity to fix and effectively control the emission of carbon dioxide thus achieve negative carbon emission, microalgae and its products modified by genetic engineering and other technologies also have a broad prospect in sewage treatment such as efficiently removing all kinds of pollutants in water and producing high-quality biofuels after use. Therefore, research on these organisms has gradually deepened in recent years. This paper summarizes the bioremediation mechanism of heavy metal ions in water by using microalgae and their modified products. The relevant research progresses since 2015 are critically reviewed and discussed. Challenges and prospects are also put forward for their industrial implementation.

Molecular insights into plant-microbe interactions for sustainable remediation of contaminated environment

The widespread distribution of organic and inorganic pollutants in water resources have increased due to rapid industrialization. Rhizospheric zone-associated bacteria along with endophytic bacteria show a significant role in remediation of various pollutants. Metaomics technologies are gaining an advantage over traditional methods because of their capability to obtain detailed information on exclusive microbial communities in rhizosphere of the plant including the unculturable microorganisms. Transcriptomics, proteomics, and metabolomics are functional methodologies that help to reveal the mechanisms of plant-microbe interactions and their synergistic roles in remediation of pollutants. Intensive analysis of metaomics data can be useful to understand the interrelationships of various metabolic activities between plants and microbes. This review comprehensively discusses recent advances in omics applications made hitherto to understand the mechanisms of plant-microbe interactions during phytoremediation. It extends the delivery of the insightful information on plant-microbiomes communications with an emphasis on their genetic, biochemical, physical, metabolic, and environmental interactions.

In Situ Functionalization of Iron Oxide Particles with Alginate: A Promising Biosorbent for Retention of Metal Ions

In this study, alginate extracted from marine algae biomass was used for the functionalization of iron oxide particles obtained in situ. This procedure ensured a complete recovery of the alginate from the aqueous solution obtained after extraction and allowed the preparation of a new biosorbent. The obtained iron oxide microparticles functionalized with alginate (Alg-Fe₃O₄-MPs) were analyzed (FTIR spectrometry, energy dispersive X-ray spectroscopy and scanning electron microscopy), and their biosorptive performance was tested for the removal of Cu(II), Co(II) and Zn(II) ions. The optimal conditions were established as pH = 5.4, adsorbent dosage of 2 g/L, contact time of minimum 60 min and room temperature (23 ± 1 °C). The retention of metal ions was quantitative (99% for Cu(II), 89% for Co(II) and 95% for Zn(II)) when the concentration of metal ions was less than 0.80 mmol M(II)/L. The Langmuir model was found to be the best fitted model for the equilibrium data, while biosorption kinetics followed the pseudo-second order model. Biosorption processes were spontaneous (ΔG⁰ < 0), endothermic (ΔH⁰ > 0), and accompanied by an increase in entropy (ΔS⁰ > 0). The high maximum biosorption capacity of Alg-Fe₃O₄-MPs and its good regeneration highlight the potential of this biosorbent for applications in decontamination processes.

Differential Zn and Mn sensitivity of microalgae species from genera Bracteacoccus and Lobosphaera

One of the most common pollutants in natural ecosystems is heavy metals. Algae are sensitive to the action of heavy metals. This allows to use algae to assess the toxicity of heavy metals, bioindication, and during phycoremediation. This study examines the effect of different Zn and Mn concentrations (1.0, 5.0, 25.0, 50.0, 500.0, 1000.0 mg L^-1) on green algae Bracteacoccus minor and Lobosphaera incisa in a chronic bioassay. The results of this study showed that the toxic effect of Zn and Mn on B. minor and L. incisa begins to manifest itself at the lowest of the studied metal concentrations-1 mg L^-1. The critical concentration of Zn, which leads to the complete death of B. minor and L. incisa, is 50.0 and 500.0 mg L^-1, and Mn is 1000.0 mg L^-1 and 500.0 mg L^-1, respectively. It was found that principal component (PC) 1 accounts for 60.47% of the total variance and reflects changes associated with low concentrations of heavy metals (up to 5.0 mg L^-1). PC2 accounts for 27.95% of the total variance. PC2 is mostly associated with high concentrations of ions of heavy metals. Thus, the effect of Zn and Mn concentrations up to 5 mg L^-1and above 50 mg L^-1on B. minor and L. incisa has a different character. At the same time, the response of the studied algae species to the action of Zn and Mn has individual differences. In general, B. minor is more resistant to Mn, while L. incisa is more resistant to Zn.

Impact of heavy metals in the microalga Chlorella sorokiniana and assessment of its potential use in cadmium bioremediation

The chlorophyte microalga Chlorella sorokiniana was tested for the bioremediation of heavy metals pollution. It was cultured with different concentrations of Cu²⁺, Cd²⁺, As (III) and As (V), showing a significant inhibition on its growth at concentrations of 500 µM Cu²⁺, 250 µM Cd²⁺, 750 µM AsO₃^3- and 5 mM AsO₄^3- or higher. Moreover, the consumption of ammonium was also studied, showing significant differences for concentrations higher than 1 mM of Cu²⁺ and As (III), and 5 mM of As (V). The determination of intracellular heavy metals concentration revealed that Chlorella sorokiniana is an outstanding Cd accumulator organism, able to accumulate 11,232 mg kg^-1 of Cd, and removing 65% of initial concentration of this heavy metal. Finally, antioxidant enzymes, such as catalase (CAT) and ascorbate peroxidase (APX), and enzymes involved in the production of glutamate and cysteine, such as glutamine syntethase (GS), glutamate dehydrogenase (GDH), O-acetylserine (thiol) lyase (OASTL) and NAD-isocitrate dehydrogenase (NAD-IDH) were studied both at gene expression and enzymatic activity levels. These enzymes exhibited different grades of upregulation, especially in response to Cd and As stress. However, GS expression was downregulated when Chlorella sorokiniana was cultured in the presence of these heavy metals.

Natural community of macroalgae from chromium-contaminated site for effective remediation of Cr(VI)-containing leachates

The natural macroalgal community, which developed in the unique and extremely Cr(VI)-polluted aquatic reservoir situated near a historical chromium-waste landfill, was studied in order to recognize the main mechanisms of Cr(VI) detoxification by the algal species. The conducted taxonomic analysis revealed mixed composition of the filamentous forms of algae and showed that three species of Tribonema, namely T. vulgare, T. microchloron and T. viride, which have not been studied before with regard to the mechanisms of Cr(VI) removal, are likely responsible for the effective bioremediation of this highly Cr(VI)-polluted habitat. The studied algal community, with the ability to grow in extremely high concentrations of Cr(VI), i.e. up to ca. 6150 times the upper limit for surface water, exhibited hyperaccumulative properties for chromium (max 16230 mg/kg dry weight) under the given environmental conditions. We found that the main mechanism of Cr(VI) detoxification was reduction followed by Cr(III) biosorption - feasibly by ion exchange and complexation mechanisms - and that the excellent efficiency of chromium reduction under the given, unfavorable weakly alkaline conditions indicates the biological origin of this process. It was concluded that the examined reservoir inhabited by the algal community can be used, after some modifications, as a simple cost-effective "bioreactor" allowing the reduction of chromium concentration to the desired level. Moreover, the conducted studies are also essential to obtain in-depth knowledge and should also be helpful in the relevance of the community for its further application as a potential biosorbent of Cr(VI) on a global scale.

A review on the removal of heavy metals and metalloids by constructed wetlands: bibliometric, removal pathways, and key factors

Heavy metals and metalloids (HMMs) pose a serious threat to both environmental and human health. The unique characteristics and environmental toxicity of HMMs make their removal from the environment a major challenge. Constructed wetlands (CWs) are increasingly being used as an eco-friendly system for the removal of HMMs from aqueous environments. In this review, bibliometric analysis was performed using the Scopus database using VOSviewer software to assess the developing use of CWs in recent years. Heavy metal and metalloid (HMM) removal pathways were reviewed (such as precipitation, co-precipitation, adsorption and ion exchange, plant action and microbial action) along with the impact of key factors (pH, chemical oxygen demand, dissolved oxygen, HMM concentration, and temperature). This review aimed to establish the connections between published results, to help effectively optimize the use of CWs for the removal of HMMs and identify the most critical factors for their effective removal. Important aspects that require further research include assessing the synergistic toxicity between different pollutants and combining the use of CWs with other technologies to optimize pollutant remediation efficiency.

Preparation and adsorption properties of Ni(ii) ion-imprinted polymers based on synthesized novel functional monomer

In this study, a novel functional monomer N-(1-(2,4-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethyl)acrylamide (NDTEA) was designed and synthesized, and was used to prepare Ni(ii) ion-imprinted polymers (Ni(ii)-IIPs). Sixteen kinds of Ni(ii)-IIP (Ni(ii)-IIP1–16) and corresponding non-imprinted polymers (NIP1–16) were prepared by precipitation polymerization method. After optimized condition experiment, Ni(ii)-IIP5 possessed maximum adsorption capacity and better imprinting factor under optimal experimental conditions which indicated by equilibrium adsorption experiments. The morphology and structural characteristics of Ni(ii)-IIP5 were characterized by scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET). The adsorption selectivity of Ni(ii)-IIP5 was analyzed by ICP-OES, and the results showed that Ni(ii)-IIP5 had favorable selectivity recognition ability for Ni(ii) when Cu(ii), Co(ii), and Cd(ii) are used as competitive ions. The kinetic experiment indicated that the performance of Ni(ii) adsorption on the surface of Ni(ii)-IIP5 obeyed the pseudo-first-order model, and adsorption equilibrium was attained after 15 min. Isothermal adsorption process fitted to Langmuir and Freundlich isothermal adsorption models, simultaneously. The results showed that Ni(ii)-IIP5 prepared by using a new functional monomer had better permeation selectivity and higher affinity for Ni(ii), which also verified the rationality of the functional monomer design. At the same time, it also provided a broad application prospect for removal of Ni(ii) in complex samples.