Preliminary characterization of biosurfactant produced by a PAH-degrading Paenibacillus sp. under thermophilic conditions

Long-term microbial functional responses in soil contaminated with biofuel/fossil fuel blends triggered by different bioremediation treatments

The use of biofuel blends with fossil fuels is widespread globally, raising concerns over novel contamination types in environments impacted by these mixtures. This study investigates the microbial functional in soils contaminated by biofuel and fossil fuel blends and subjected to various bioremediation treatments. Using metagenomic analysis, it was compared hydrocarbon degradation functional profiles across areas polluted with ethanol/gasoline and biodiesel/diesel blends. Results indicate that long-term natural attenuation areas exhibited distinct functional profiles compared to actively bioremediated areas. However, same hydrocarbon degradation genes were enriched across all areas, highlighting functional redundancy despite taxonomic variation in hydrocarbon-degrading microbes. Finally, several of the keystone species found were hydrocarbon degraders, such as members of the families Clostridiaceae and Comamonadaceae, representing potential targets for biostimulation in future remediation efforts. This long-term, field-scale study uniquely focuses on the functional profiles of microbial communities, offering new insights into the bioremediation of complex biofuel/fossil fuel contaminants in situ.

Reducing the accumulation of cadmium and phenanthrene in rice by optimizing planting spacing: Role of low-abundance but core rhizobacterial communities

Optimizing planting spacing is a common agricultural practice for enhancing rice growth. However, its effect on the accumulation of cadmium (Cd) and phenanthrene (Phen) in soil-rice systems and the response mechanisms of rhizobacteria to co-contaminants remain unclear. This study found that reducing rice planting spacing to 5 cm and 10 cm significantly decreased the bioavailability of Cd (by 7.9 %-29.5 %) and Phen (by 12.9 %-47.6 %) in the rhizosphere soil by converting them into insoluble forms. The increased accumulation of Cd and Phen in roots and iron plaques (IPs) ultimately led to decreased Cd (by 32.2 %-39.9 %) and Phen (by 4.2 %-17.3 %) levels in brown rice, and also significantly affected the composition of rhizobacteria. Specifically, reducing rice planting spacing increased the abundance of low-abundance but core rhizobacteria in the rhizosphere soil and IPs, including Bacillus, Clostridium, Sphingomonas, Paenibacillus, and Leifsonia. These low-abundance but core rhizobacteria exhibited enhanced metabolic capacities for Cd and Phen, accompanied by increased abundances of Cd-resistance genes (e.g., czcC and czcB) and Phen-degradation genes (e.g., pahE4 and pahE1) within the rhizosphere soil and IPs. Reduced planting spacing had no noticeable impact on rice biomass. These findings provide new insights into the role of low-abundance but core rhizobacterial communities in Cd and Phen uptake by rice, highlighting the potential of reduced planting spacing as an eco-friendly strategy for ensuring the safety of rice production on contaminated paddy soils.

Impact of artisanal refining activities on bacterial diversity in a Niger Delta fallow land

Hydrocarbon pollution is a major ecological problem facing oil-producing countries, especially in the Niger Delta region of Nigeria. In this study, a site that had been previously polluted by artisanal refining activity was investigated using 16S rRNA Illumina high-throughput sequencing technology and bioinformatics tools. These were used to investigate the bacterial diversity in soil with varying degrees of contamination, determined with a gas chromatography-flame ionization detector (GC-FID). Soil samples were collected from a heavily polluted (HP), mildly polluted (MP), and unpolluted (control sample, CS) portion of the study site. DNA was extracted using the Zymo Research (ZR) Fungi/Bacteria DNA MiniPrep kit, followed by PCR amplification and agarose gel electrophoresis. The microbiome was characterized based on the V3 and V4 hypervariable regions of the 16S rRNA gene. QIIME (Quantitative Insights Into Microbial Ecology) 2 software was used to analyse the sequence data. The final data set covered 20,640 demultiplexed high-quality reads and a total of 160 filtered bacterial OTUs. Proteobacteria dominated samples HP and CS, while Actinobacteria dominated sample MP. Denitratisoma, Pseudorhodoplanes, and Spirilospora were the leading genera in samples HP, CS, and MP respectively. Diversity analysis indicated that CS [with 25.98 ppm of total petroleum hydrocarbon (TPH)] is more diverse than HP (with 490,630 ppm of TPH) and MP (with 5398 ppm of TPH). A functional prediction study revealed that six functional modules dominated the dataset, with metabolism covering up to 70%, and 11 metabolic pathways. This study demonstrates that a higher hydrocarbon concentration in soil adversely impacts microbial diversity, creating a narrow bacterial diversity dominated by hydrocarbon-degrading species, in addition to the obvious land and ecosystem degradation caused by artisanal refining activities. Overall, the artisanal refining business is significantly driving ecosystem services losses in the Niger Delta, which calls for urgent intervention, with focus on bioremediation.

Development of a highly tolerant bacterial consortium for asphaltene biodegradation in soils

Asphaltenes are the most polar and heavy fraction of petroleum, and their complex structure and toxicity make them resistant to biodegradation. The ability to tolerate high asphaltene concentrations is crucial to reducing the toxicity-related inhibition of microbial growth and improving their capacity for adaptation, survival, and biodegradation in soils highly contaminated with asphaltenes. This study developed a highly tolerant consortium for efficient asphaltene biodegradation in soils from 22 bacterial isolates obtained from heavy-crude oil-contaminated soils. Isolates corresponded to the Rhodococcus, Bacillus, Stutzerimonas, Cellulosimicrobium, Pseudomonas, and Paenibacillus genera, among others, and used pure asphaltenes and heavy crude oil as the only carbon sources. Surface plate assays were used to evaluate the tolerance of individual isolates to asphaltenes, and the results showed variations in the extension and inhibition rates with maximum tolerance levels at 60,000 mg asphaltenes l-1. Inhibition assays were used to select non-antagonistic bacterial isolates among those showing the highest tolerance levels to asphaltenes. A consortium made up of the five most tolerant and non-antagonistic bacterial isolates was able to degrade up to 83 wt.% out of 10,000 mg asphaltenes kg-1 in the soil after 52 days. Due to its biological compatibility, high asphaltene tolerance, and ability to utilise it as a source of energy, the degrading consortium developed in this work has shown a high potential for soil bioremediation and is a promising candidate for the treatment of aged soil areas contaminated with heavy and extra-heavy crude oil. This would be the first research to assess and consider extreme bacterial tolerance and microbial antagonism between individual degrading microbes, leading to the development of an improved consortium capable of efficiently degrading high amounts of asphaltenes in soil.

Removal of mixed contaminants from landfill leachate-contaminated soil by flushing with bio-surfactant: laboratory column tests

Landfill leachate-contaminated soil is widespread all over the world. In order to study the removal of mixed contaminants from landfill leachate-contaminated soil by flushing with bio-surfactant, soil column test was conducted to select an optimum concentration of bio-surfactant saponin (SAP) at first. Then, the removal efficiencies of organic contaminants, ammonia nitrogen, and heavy metals from landfill leachate-contaminated soil by flushing with SAP were studied. At last, the toxicity of contaminated soil before and after flushing was estimated by sequential extraction of heavy metals and plant growth test. The test results showed that the SAP solution with the concentration of 2.5 CMC could effectively remove the mixed contaminants from soil and would not introduce excessive pollutants of SAP in soil. Specifically, the removal efficiencies of organic contaminant and ammonia nitrogen were 47.01% and 90.42%, respectively. And the removal efficiencies of Cu, Zn, and Cd were 29.42%, 22.55%, and 17.68%, respectively. During flushing, hydrophobic organic compounds as well as physisorption and ion-exchange ammonia nitrogen in soil were removed by the solubilization effect of SAP, and heavy metals were removed by the chelation of SAP. After flushing with SAP, the reduced partition index (I_R) value of Cu and Cd increased, and the mobility index (M_F) value of Cu decreased. In addition, flushing with SAP reduced the plant toxicity of contaminated soil, and the residual SAP in soil promoted the plant growth. Therefore, flushing with SAP offered great potentials in remediating the landfill leachate-contaminated soil.

Identification of cultivable bacterial strains producing biosurfactants/bioemulsifiers isolated from an Algerian oil refinery

Algerian petrochemical industrial areas are usually running spills and leakages of hydrocarbons, which constitutes a major source of toxic compounds in soil such as aromatic hydrocarbons. In this paper, samples of crude oil-polluted soil were collected from Skikda's oil refinery and were subjected to mono and polyaromatic hydrocarbons threshold assessment. Soil physicochemical parameters were determined for each sample to examine their response to pollution. Amid 34 isolated bacteria, eleven strains were selected as best Biosurfactants (Bs)/Bioemulsifiers (Be) producers and were assigned to Firmicutes and Proteobacteria phyla based on molecular identification. Phylogenetic analysis of partial 16S rDNA gene sequences allowed the construction of evolutionary trees by means of the maximum likelihood method. Accordingly, strains were similar to Bacillus spp., Priesta spp., Pseudomonas spp., Enterobacter spp. and Kosakonia spp. with more than 95% similarity. These strains could be qualified candidates for an efficient bioremediation process of severally polluted soils.

Structural and functional characterization of a novel biosurfactant from Bacillus sp. IITD106

Plant saponins are attractive biosurfactants and have been used to enhance phytoremediation. There are only limited reports on saponins produced by bacteria. Here, we report structural and functional characterization of a novel saponin produced by Bacillus sp. IITD106. Biosurfactant production was determined by emulsion index, drop collapse, oil displacement and hemolytic assays. The biosurfactant was stable over a range of temperature (30 °C to 70 °C), salinity (0-150 g liter^-1) and pH (4-10). The surface tension of the medium reduced from 58.89 mN/m to 27.29 mN/m using the isolated biosurfactant. Chromatographic analysis revealed the biosurfactant to be a glycolipid. LCMS, FT-IR and NMR analysis identified the biosurfactant to be a saponin containing two sugar groups and a 5 ringed triterpene sapogenin unit. Genome sequencing of the strain revealed the presence of genes responsible for biosynthesis of saponin. Statistical optimization of culture medium resulted in 9.3-fold increase in biosurfactant production. Kinetics study of biosurfactant production performed in a stirred tank batch bioreactor resulted in 6.04 g liter^-1 and 6.9 g liter^-1 biomass and biosurfactant concentration, respectively. The biosurfactant was found to solubilize polycyclic aromatic hydrocarbons. The potential of cell free biosurfactant containing broth to enhance oil recovery was tested in a sand pack column and recovery of 63% of residual oil was observed. To our knowledge this is the first report of saponin production by any of the strains of Bacillus.

Isolation and Characterization of Biosurfactant-Producing Bacteria from Amapaense Amazon Soils

The objective of this research was to perform screening of biosurfactant-producing bacteria from Amapaense Amazon soils. Floodplain- and upland-forest soils of three municipalities of the Amapá state were isolated and identified. The isolates were cultured in nutrient broth with olive oil, and their extracts were evaluated according to drop collapse, oil dispersion, emulsification, and surface tension tests. From three hundred and eighteen isolates, the 43 bacteria were selected and identified by 16S rDNA gene sequencing, indicating the presence of three different genera, Serratia, Paenibacillus, and Citrobacter. The extracellular biosurfactant production pointed out the 15 most efficient bacteria that presented high emulsification capacity (E₂₄ > 48%) and stability (less than 10% of drop after 72 h) and great potential to reduce the surface tension (varying from 49.40 to 34.50 mN·m⁻¹). Cluster analysis classified genetically related isolates in different groups, which can be connected to differences in the amount or the sort of biosurfactants. Isolates from Serratia genus presented better emulsification capacity and produced a more significant surface tension drop, indicating a promising potential for biotechnological applications.

Characterization and properties of the biosurfactant produced by PAH-degrading bacteria isolated from contaminated oily sludge environment

The aim of the present study was to investigate biosurfactant production ability of five different polyaromatic hydrocarbon (PAH)-metabolizing bacteria, such as Ochrobactrum anthropi IITR07, Pseudomonas mendocina IITR46, Microbacterium esteraromaticum IITR47, Pseudomonas aeruginosa IITR48, and Stenotrophomonas maltophilia IITR87. These bacteria showed biosurfactant production using 2% glucose as rich substrate; strain IITR47 yielded the highest with 906 and 534 mg/L biosurfactant in the presence of naphthalene and crude oil as the unique carbon sources. P. aeruginosa IITR48 showed the least surface tension at 29 N/m and the highest emulsification index at 63%. The biosurfactants produced were identified as glycolipid and rhamnolipid based on Fourier transform infrared spectroscopy analysis. In particular, the biosurfactant produced by bacteria S. maltophilia IITR87 efficiently emulsified mustard oil with an E24 value of 56%. It was observed that, all five biosurfactants from these degrader strains removed 2.4-, 1.7-, 0.9-, 3.8-, and 8.3-fold, respectively, crude oil from contaminated cotton cloth. Rhamnolipid derived from IITR87 was most efficient, exhibiting highest desorption of crude oil. These biosurfactants exhibited good stability without significantly losing its emulsification ability under extreme conditions, thus can be employed for bioremediation of PAHs from diverse contaminated ecosystem. Graphical Abstract.

Diversity of Metal-Resistant and Tensoactive-Producing Culturable Heterotrophic Bacteria Isolated from a Copper Mine in Brazilian Amazonia

Bacterial extracellular polymeric substances (EPSs) present diverse properties of biotechnological interest, such as surface modification, metal adsorption and hydrophobic substances solubilization through surface tension reduction. Thus, there is a growing demand for new producing strains and structurally variable biomolecules with different properties. One approach for scanning this biodiversity consists of exploring environments under selective pressures. The aim of this study was to evaluate the composition of culturable heterotrophic bacterial communities from five different sites from a copper mine in the Amazon biome by an enrichment technique to obtain metal resistant bacteria (lead, arsenic, cadmium, copper and zinc) capable of producing EPSs. The bacterial densities at the sites varied from 2.42 × 103 to 1.34 × 108 NMP mL-1 and the 77 bacterial isolates obtained were classified in four divisions, β-Proteobacteria (16.88%), γ-Proteobacteria (7.29%), Firmicutes (61%) and Actinobacteria (12.98%). Bacillus, Alcaligenes, and Lysinibacillus were the most dominant among the 16 observed genera, but the relative frequency of each varied according to the sample and the metal used in the enrichment culture. 58% of the bacterial strains (45) could produce EPSs. From these, 33 strains showed emulsifying activity (E24), and 9 of them reached values higher than 49%. Only Actinomyces viscosus E3.Pb5 and Bacillus subtilis group E3.As2 reduced the medium surface tension to values lower than 35 mN m-1. It was possible to confirm the high presence of bacteria capable of producing EPSs with tensoactive properties in Amazon copper mines and the evolutionary pressure exerted by the heavy metals during enrichment. These molecules can be tested as an alternative for use in processes that involve the removal of metals, such as the bioremediation of contaminated environments.

Modification of the Bacterial Cell Wall—Is the Bioavailability Important in Creosote Biodegradation?

Creosote oil, widely used as a wood preservative, is a complex mixture of different polycyclic aromatic compounds. The soil contamination result in the presence of a specific microcosm. The presented study focuses on the most active strains involved in bioremediation of long-term creosote-contaminated soil. In three soil samples from different boreholes, two Sphingomonas maltophilia (S. maltophilia) and one Paenibacillus ulginis (P. ulginis) strain were isolated. The conducted experiments showed the differences and similarities between the bacteria strains capable of degrading creosote from the same contaminated area. Both S. maltophilia strains exhibit higher biodegradation efficiency (over 50% after 28 days) and greater increase in glutathione S-transferase activity than P. ulginis ODW 5.9. However, S. maltophilia ODW 3.7 and P. ulginis ODW 5.9 were different from the third of the tested strains. The growth of the former two on creosote resulted in an increase in cell adhesion to Congo red and in the total membrane permeability. Nevertheless, all three strains have shown a decrease in the permeability of the inner cell membrane. That suggests the complex relationship between the cell surface modifications and bioavailability of the creosote to microorganisms. The conducted research allowed us to broaden the current knowledge about the creosote bioremediation and the properties of microorganisms involved in the process.

Hyperthermophilic Clostridium sp. N-4 produced a glycoprotein biosurfactant that enhanced recovery of residual oil at 96 °C in lab studies

Biosurfactant producing hypethermophilic microorganisms are essentially required for Microbial Enhanced Oil Recovery (MEOR) from high temperature oil reservoirs (above 90 °C). In the present study, biosurfactant producing Clostridium sp. N-4, optimally growing at 96 °C was isolated from a high temperature oil reservoir. Effect of pH, temperature and salinity on production and activity of N-4 biosurfactant was investigated. Biosurfactant produced by N-4 was partially purified by acid precipitation, characterized using FT-IR spectroscopy; and evaluated for its ability to enhance oil recovery in sand pack studies. The strain N-4 produced biosurfactant over a wide range of pH (5.0-9.0) and salinity (0-13%) at high temperature (80-100 °C) and optimally at pH 7, 96 °C and 4% salinity. N-4 biosurfactant was active at 37-101 °C; pH, 5-10 and salinity of 0-12 % (w/v). N-4 biosurfactant, characterized as glycoprotein reduced the surface tension of water by 32 ± 0.4 mN/m at critical micelle concentration of 100 μg/ml. N-4 biosurfactant mobilized 17.15% of residual oil saturation in sand pack studies. Similarly, the strain N-4 also recovered 36.92% of the residual oil in sand pack studies under the conditions mimicking the environment of depleted high temperature oil reservoir. Thus, the biosurfactant producing Clostridium sp. N-4 was identified as a suitable agent for enhanced oil recovery from high temperature oil reservoirs.

Stable-Isotope Probing-Enabled Cultivation of the Indigenous Bacterium Ralstonia sp. Strain M1, Capable of Degrading Phenanthrene and Biphenyl in Industrial Wastewater

To identify and obtain the indigenous degraders metabolizing phenanthrene (PHE) and biphenyl (BP) from the complex microbial community within industrial wastewater, DNA-based stable-isotope probing (DNA-SIP) and cultivation-based methods were applied in the present study. DNA-SIP results showed that two bacterial taxa (Vogesella and Alicyclobacillus) were considered the key biodegraders responsible for PHE biodegradation only, whereas Bacillus and Cupriavidus were involved in BP degradation. Vogesella and Alicyclobacillus have not been linked with PHE degradation previously. Additionally, DNA-SIP helped reveal the taxonomic identity of Ralstonia-like degraders involved in both PHE and BP degradation. To target the separation of functional Ralstonia-like degraders from the wastewater, we modified the traditional cultivation medium and culture conditions. Finally, an indigenous PHE- and BP-degrading strain, Ralstonia pickettii M1, was isolated via a cultivation-dependent method, and its role in PHE and BP degradation was confirmed by enrichment of the 16S rRNA gene and distinctive dioxygenase genes in the DNA-SIP experiment. Our study has successfully established a program for the application of DNA-SIP in the isolation of the active functional degraders from an environment. It also deepens our insight into the diversity of indigenous PHE- and BP-degrading communities.IMPORTANCE The comprehensive treatment of wastewater in industrial parks suffers from the presence of multiple persistent organic pollutants (POPs), such as polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), which reduce the activity of activated sludge and are difficult to eliminate. Characterizing and applying active bacterial degraders metabolizing multiple POPs therefore helps to reveal the mechanisms of synergistic metabolism and to improve wastewater treatment efficiency in industrial parks. To date, SIP studies have successfully investigated the biodegradation of PAHs or PCBs in real-world habitats. DNA-SIP facilitates the isolation of target microorganisms that pose environmental concerns. Here, an indigenous phenanthrene (PHE)- and biphenyl (BP)-degrading strain in wastewater, Ralstonia pickettii M1, was isolated via a cultivation-dependent method, and its role in PHE and BP degradation was confirmed by DNA-SIP. Our study provides a routine protocol for the application of DNA-SIP in the isolation of the active functional degraders from an environment.