Application of effect-directed analysis to identify mutagenic nitrogenous disinfection by-products of advanced oxidation drinking water treatment

High-Efficiency Effect-Directed Analysis Leveraging Five High Level Advancements: A Critical Review

Organic contaminants are ubiquitous in the environment, with mounting evidence unequivocally connecting them to aquatic toxicity, illness, and increased mortality, underscoring their substantial impacts on ecological security and environmental health. The intricate composition of sample mixtures and uncertain physicochemical features of potential toxic substances pose challenges to identify key toxicants in environmental samples. Effect-directed analysis (EDA), establishing a connection between key toxicants found in environmental samples and associated hazards, enables the identification of toxicants that can streamline research efforts and inform management action. Nevertheless, the advancement of EDA is constrained by the following factors: inadequate extraction and fractionation of environmental samples, limited bioassay endpoints and unknown linkage to higher order impacts, limited coverage of chemical analysis (i.e., high-resolution mass spectrometry, HRMS), and lacking effective linkage between bioassays and chemical analysis. This review proposes five key advancements to enhance the efficiency of EDA in addressing these challenges: (1) multiple adsorbents for comprehensive coverage of chemical extraction, (2) high-resolution microfractionation and multidimensional fractionation for refined fractionation, (3) robust in vivo/vitro bioassays and omics, (4) high-performance configurations for HRMS analysis, and (5) chemical-, data-, and knowledge-driven approaches for streamlined toxicant identification and validation. We envision that future EDA will integrate big data and artificial intelligence based on the development of quantitative omics, cutting-edge multidimensional microfractionation, and ultraperformance MS to identify environmental hazard factors, serving for broader environmental governance.

What is the role of nitrate/nitrite in trace organic contaminants degradation and transformation during UV-based advanced oxidation processes?

The effectiveness of UV-based advanced oxidation processes (UV-AOPs) in degrading trace organic contaminants (TrOCs) can be significantly influenced by the ubiquitous presence of nitrate (NO3-) and nitrite (NO2-) in water and wastewater. Indeed, NO3-/NO2- can play multiple roles of NO3-/NO2- in UV-AOPs, leading to complexities and conflicting results observed in existing research. They can inhibit the degradation of TrOCs by scavenging reactive species and/or competitively absorbing UV light. Conversely, they can also enhance the elimination of TrOCs by generating additional •OH and reactive nitrogen species (RNS). Furthermore, the presence of NO3-/NO2- during UV-AOP treatment can affect the transformation pathways of TrOCs, potentially resulting in the nitration/nitrosation of TrOCs. The resulting nitro(so)-products are generally more toxic than the parent TrOCs and may become precursors of nitrogenous disinfection byproducts (N-DBPs) upon chlorination. Particularly, since the impact of NO3-/NO2- in UV-AOPs is largely due to the generation of RNS from NO3-/NO2- including NO•, NO2•, and peroxynitrite (ONOO-/ONOOH), this review covers the generation, properties, and detection methods of these RNS. From kinetic, mechanistic, and toxicologic perspectives, future research needs are proposed to advance the understanding of how NO3-/NO2- can be exploited to improve the performance of UV-AOPs treating TrOCs. This critical review provides a comprehensive framework outlining the multifaceted impact of NO3-/NO2- in UV-AOPs, contributing insights for basic research and practical applications of UV-AOPs containing NO3-/NO2-.

Effect of UV/peroxymonosulfate pretreatment on disinfection byproduct (DBP) formation during post-chlorination of humic acid

UV/peroxymonosulfate (UV/PMS) is a promising advanced oxidation technology in water treatment. This study aimed to investigate the impact of UV/PMS on humic acid (HA) and the influence of PMS dosage, pretreatment time, pH pretreatment, nitrate, nitrite, ammonium, and bicarbonate influencing factors on disinfection byproduct (DBP) formation during post-chlorination. With increased PMS dosage or pretreatment time, the UV/PMS treatment significantly reduced ultraviolet absorbance and increased mineralization. It altered the fractional constituent as humic substances were gradually transformed into building blocks and low-molecular-weight acids. However, most DBP formation increased initially and then decreased after subsequent chlorination. Rising nitrate or nitrite concentrations markedly promoted halonitromethane (HNM) formation. The presence of ammonia had a more significant impact on dichloroacetonitrile (DCAN) formation. Bicarbonate in UV/PMS pretreatment increased carbonated disinfection byproduct (C-DBP) formation, whereas it had a negligible impact on nitrogenous disinfection byproduct (N-DBP) formation. The present study revealed the impact of a series of influencing factors on DBP formation in UV/PMS reaction systems, providing comprehensive insights on applying UV/PMS in actual practice.

Emerging investigator series: contributions of reactive nitrogen species to transformations of organic compounds in water: a critical review

Reactive nitrogen species (RNS) pose a potential risk to drinking water quality because they react with organic compounds to form toxic byproducts. Since the discovery of RNS formation in sunlit surface waters, these reactive intermediates have been detected in numerous sunlit natural waters and engineered water treatment systems. This critical review summarizes what is known regarding RNS, including their formation, contributions to contaminant transformation, and products resulting from RNS reactions. Reaction mechanisms and rate constants have been described for nitrogen dioxide (˙NO₂) reacting with phenolic compounds. However, significant knowledge gaps remain regarding reactions of RNS with other types of organic compounds. Promising methods to quantify RNS concentrations and reaction rates include the use of selective quenchers and probe compounds as well as electron paramagnetic resonance spectroscopy. Additionally, high resolution mass spectrometry methods have enabled the identification of nitr(os)ated byproducts that form via RNS reactions in sunlit surface waters, UV-based treatment systems, treatment systems that employ chemical oxidants such as chlorine and ozone, and certain types of biological treatment processes. Recommendations are provided for future research to increase understanding of RNS reactions and products, and the implications for drinking water toxicity.

Bioassay-directed analysis-based identification of relevant pyrrolizidine alkaloids

Pyrrolizidine alkaloids (PAs) are produced by various plant species and have been detected as contaminants in food and feed. Monitoring programmes should include PAs that are present in relevant matrices and that exhibit a high toxic potential. The aim of the present study was to use a bioassay-directed analysis approach to identify relevant PAs not yet included in monitoring programmes. To that end, extracts of Heliotropium europaeum and H. popovii were prepared and analysed with LC–MS/MS for the presence of 35 PAs included in monitoring programmes, as well as for genotoxic activity in the HepaRG/γH2AX assay. Europine, heliotrine and lasiocarpine were found to be the most abundant PAs. The extracts showed a higher γH2AX activity than related artificial mixtures of quantified known PAs, which might point to the presence of unknown toxic PAs. The H. europaeum extract was fractionated and γH2AX activities of individual fractions were determined. Fractions were further analysed applying LC–Orbitrap-MS analysis and Compound Discoverer software, identifying various candidate PAs responsible for the non-explained genotoxic activity. Altogether, the results obtained show that bioassay-directed analysis allows identification of candidate PAs that can be included in monitoring programmes.

Comparing conventional and green fracturing fluids by chemical characterisation and effect-based screening

There is public and scientific concern about air, soil and water contamination and possible adverse environmental and human health effects as a result of hydraulic fracturing activities. The use of greener chemicals in fracturing fluid aims to mitigate these effects. This study compares fracturing fluids marketed as either 'conventional' or 'green', as assessed by their chemical composition and their toxicity in bioassays. Chemical composition was analysed via non-target screening using liquid chromatography - high resolution mass spectrometry, while toxicity was evaluated by the Ames fluctuation test to assess mutagenicity and CALUX reporter gene assays to determine specific toxicity. Overall, the results do not indicate that the 'green' fluids are less harmful than the 'conventional' ones. First, there is no clear indication that the selected green fluids contain chemicals present at lower concentrations than the selected conventional fluids. Second, the predicted environmental fate of the identified compounds does not seem to be clearly distinct between the 'green' and 'conventional' fluids, based on the available data for the top five chemicals based on signal intensity that were tentatively identified. Furthermore, Ames fluctuation test results indicate that the green fluids have a similar genotoxic potential than the conventional fluids. Results of the CALUX reporter gene assays add to the evidence that there is no clear difference between the green and conventional fluids. These results do not support the claim that currently available and tested green-labeled fracturing fluids are environmentally more friendly alternatives to conventional fracturing fluids.

Formation of nitrogenous disinfection byproducts in MP UV-based water treatments of natural organic matters: The role of nitrate

UV-based water treatment processes have been reported to induce genotoxicity during the treatments of surface water, drinking water and artificial water with natural organic matters (NOMs), causing genotoxicity concerns for the drinking water safety. Nitrogenous disinfection byproducts (N-DBPs) were generally reported to be much more genotoxic than their non-nitrogenous analogues, and might be responsible for the genotoxicity in UV processes. Although nitrate-rich water was getting attention for the possibility of genotoxicity and N-DBPs during UV treatments, the impact mechanism of nitrate on the degradation of NOMs, the formation of N-DBPs and genotoxicity has not been explicated. Here simulation experiments of NOM degradation under medium-pressure (MP) UV and MP UV/H₂O₂ treatments were conducted to explore the effect of nitrate on the molecular characteristics of NOM, the nitrate-derived N-DBPs and the potential genotoxicity through non-targeted analysis and CALUX® reporter gene assays. The results showed that nitrate can accelerate the degradation of NOMs in the MP UV process but inhibit the degradation of NOMs in the MP UV/H₂O₂ process. During the degradation of NOMs, the molecular compositions varied by the effect of nitrate on oxygen atoms, molecule analogs, and saturation. A total of 105 and 374 nitrate-derived N-DBPs were identified in the MP UV and MP UV/H₂O₂ treatment, respectively. Most of these N-DBPs contain one nitrogen atom, and the representative features are nitro-, methoxy- (or hydroxyl-) and ester- groups on benzene. No genotoxicity was observed without nitrate spiking, whereas genotoxicity was induced after both MP UV and MP UV/H₂O₂ treatments when nitrate was spiked, which is worthy of attention for the drinking water safety management.

Unravelling molecular transformation of dissolved effluent organic matter in UV/H2O2, UV/persulfate, and UV/chlorine processes based on FT-ICR-MS analysis

Ultraviolet-based advanced oxidation processes (UV-AOPs) are very promising in advanced treatment of municipal secondary effluents. However, the transformation of dissolved effluent organic matter (dEfOM) in advanced treatment of real wastewater, particularly at molecular level, remains unclear. In this study, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) coupled with multiple statistical analysis were performed to better understand the transformation of dEfOM in UV/H₂O₂, UV/persulfate (UV/PS), and UV/chlorine treatments. An obvious increase in oxygen content of dEfOM was observed after every UV-AOPs treatment, and the detailed oxygenation processes were further uncovered by mass difference analysis based on 24 types of typical reactions. Generally, UV/H₂O₂ process was subjected to the most oxygenation reactions with the typical tri-hydroxylation one (+3O), whereas di-hydroxylation reaction (+H₂O₂) was dominant in UV/PS and UV/chlorine processes. Additionally, the three UV-AOPs shared the majority of precursors, and more proportions of unique products were identified for each process. The precursors with lower H/C and higher aromaticity were readily degraded by UV/chlorine over UV/H₂O₂ and UV/PS, with the products featuring lower molecular weight. Moreover, dEfOM of high aromaticity tended to produce chlorinated byproducts through addition reactions in chlorination and UV/chlorine processes. Among these UV-AOPs, the highest reduction of both acute toxicity and specific UV absorbance at 254 nm (SUVA₂₅₄) was observed for UV/chlorine, implying the potential for UV/chlorine process in advanced treatment of wastewater. In addition, acute toxicity was highly correlated with SUVA₂₅₄ and CHOS compounds. This study is believed to help better understand the different fates of dEfOM in real wastewater during UV-AOPs treatment.

Exploring the genotoxicity triggers in the MP UV/H2O2-chloramination treatment of bisphenol A through bioassay coupled with non-targeted analysis

Bisphenol A (BPA) is a well-known xenoestrogen, and UV/H₂O₂ advanced oxidation process (AOP) is one of the most effective technologies to remove BPA from water. Using BPA spiked tap water, a batch-scale photochemical experiment was conducted to investigate whether BPA can pose a genotoxicity concern during the medium pressure (MP) UV/H₂O₂ treatment and the post-chloramination. Samples at different UV exposure and post-chloramination durations were collected and analyzed by CALUX® gene reporter assays regarding estrogen receptor α (ERα) and p53 transcriptional activity. MP UV/H₂O₂ process did not cause extra estrogenic effects from the degradation of BPA, whereas genotoxicity occurred when the treated water was exposed with monochloramine. Seven frequently reported nitrogenous disinfection byproducts (N-DBPs) were detected, but none of them were responsible for the observed genotoxicity. Employed with gas chromatography-quadrupole time-of-flight mass spectrometry (GC-QTOF-MS), four compounds possibly contributed to the genotoxicity were tentatively identified and two of them with aminooxy- or cyano- group were considered as "new" N-DBPs. This study demonstrated that by-products differ from their parent compounds in toxicity can be formed in the UV oxidation with post-disinfection process, which should become a cause for concern.

Halomethanesulfonic Acids-A New Class of Polar Disinfection Byproducts: Standard Synthesis, Occurrence, and Indirect Assessment of Mitigation Options

Halomethanesulfonic acids (HMSAs) are recently discovered polar disinfection byproducts without commercially available reference materials. To allow for their accurate quantification, we successfully synthesized standards for the four presumably most prevalent HMSA congeners: chloromethanesulfonic acid, bromomethanesulfonic acid, dichloromethanesulfonic acid, and bromochloromethanesulfonic acid. After structure confirmation and quantification with high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy, we integrated them into a multilayer solid phase extraction and hydrophilic interaction liquid chromatography-tandem mass spectrometry method dedicated to the analysis of polar water contaminants. With this method we monitored HMSAs in drinking water production plants from four European countries and tap water samples taken in six countries. HMSAs were detected in the low μg/L range after the chlorination step during drinking water production, all tap waters samples, and two surface waters used for drinking water production. Concentrations in tap water samples ranged from 0.07 μg/L to 11.5 μg/L while the HMSA concentrations in surface waters were in the range of 100 ng/L. We utilized the HMSA formation potential to indirectly assess the behavior of hitherto unknown HMSA precursors, consequently identifying ozonation, filtration through activated carbon, and reverse osmosis as efficient removal tools for HMSA precursors, thus limiting their formation during subsequent water disinfection.

The role of analytical chemistry in exposure science: Focus on the aquatic environment

Exposure science, in its broadest sense, studies the interactions between stressors (chemical, biological, and physical agents) and receptors (e.g. humans and other living organisms, and non-living items like buildings), together with the associated pathways and processes potentially leading to negative effects on human health and the environment. The aquatic environment may contain thousands of compounds, many of them still unknown, that can pose a risk to ecosystems and human health. Due to the unquestionable importance of the aquatic environment, one of the main challenges in the field of exposure science is the comprehensive characterization and evaluation of complex environmental mixtures beyond the classical/priority contaminants to new emerging contaminants. The role of advanced analytical chemistry to identify and quantify potential chemical risks, that might cause adverse effects to the aquatic environment, is essential. In this paper, we present the strategies and tools that analytical chemistry has nowadays, focused on chromatography hyphenated to (high-resolution) mass spectrometry because of its relevance in this field. Key issues, such as the application of effect direct analysis to reduce the complexity of the sample, the investigation of the huge number of transformation/degradation products that may be present in the aquatic environment, the analysis of urban wastewater as a source of valuable information on our lifestyle and substances we consumed and/or are exposed to, or the monitoring of drinking water, are discussed in this article. The trends and perspectives for the next few years are also highlighted, when it is expected that new developments and tools will allow a better knowledge of chemical composition in the aquatic environment. This will help regulatory authorities to protect water bodies and to advance towards improved regulations that enable practical and efficient abatements for environmental and public health protection.

Controlled Microwave-Assisted Synthesis of the 2D-BiOCl/2D-g-C3N4 Heterostructure for the Degradation of Amine-Based Pharmaceuticals under Solar Light Illumination

Designing efficient 2D-bismuth oxychloride (BiOCl)/2D-g-C₃N₄ heterojunction photocatalysts by the microwave-assisted method was studied in this work using different amounts of BiOCl plates coupled with g-C₃N₄ nanosheets. The effects of coupling the 2D structure of g-C₃N₄ with the 2D structure of BiOCl were systematically examined by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy, X-ray diffraction, photoluminescence (PL), lifetime decay measurement, surface charges of the samples at various pH conditions, and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The prepared photocatalysts were used for the degradation of amine-based pharmaceuticals, and nizatidine was used as a model pollutant to evaluate the photocatalytic activity. The UV-vis DRS and other optical properties indicated the major effect of coupling of BiOCl with g-C₃N₄ into a 2D/2D structure. The results showed a narrowing in the band gap energy of the composite form, whereas the PL and lifetime analysis showed greater inhibition of the electron-hole recombination process and slightly longer charge carrier lifetime. Accordingly, the BiOCl/g-C₃N₄ composite samples exhibited an enhancement in the photocatalytic performance, specifically for the 10% BiOCl/g-C₃N₄ sample. Moreover, the zeta potential of this sample at different pH values was evaluated to determine the isoelectric point of the synthesized composite material. Consequently, the pH was adjusted to match the isoelectric point of the complex materials, which further enhanced the activity. Further degradation of pharmaceuticals was studied under solar light irradiation, and 96% degradation was achieved within 30 min.

Genotoxicity assay and potential byproduct identification during different UV-based water treatment processes

Formation of genotoxic byproducts during different ultraviolet (UV) -related water/wastewater treatment processes (including medium pressure (MP) UV oxidation, LP UV oxidation, chlorination, biological activated carbon (BAC) treatment, H₂O₂ oxidation, and two or more combined processes) was investigated by Ames fluctuation test using Salmonella strains TA98 and TA100 with and without rat liver enzyme extract S9. Byproducts responsible for genotoxicity were identified. The results showed that MP UV can induce mutagenicity and LP UV treatment does not induce mutagenicity. H₂O₂ oxidation could degrade part of genotoxic compounds. Compared with chlorination, BAC treatment is more effective in removing genotoxicity. Mutagenicity was found mostly in samples tested with TA100 instead of TA98, especially with TA100 without S9, indicating that guanosine and/or cytosine adducts contribute to mutation or toxicological effects in MP UV treated samples. Potential genotoxic byproducts were selected, most of which were nitrogenous organic compounds with more than 10 carbon atoms. Nitrosamines and histidine were excluded from potential genotoxic candidates. The results could contribute to evaluation of mutagenicity of various UV-based water treatment processes.

Risk-based approach in the revised European Union drinking water legislation: Opportunities for bioanalytical tools

A plethora of in vitro bioassays are developed in the context of chemical risk assessment and clinical diagnostics to test effects on different biological processes. Such assays can also be implemented in effect-based monitoring (EBM) of (drinking) water quality alongside chemical analyses. Effects-based monitoring can provide insight into risks for the environment and human health associated with exposure to (unknown) complex, low-level mixtures of micropollutants, which fits in the risk-based approach that was recently introduced in the European Drinking Water Directive. Some challenges remain, in particular those related to selection and interpretation of bioassays. For water quality assessment, carcinogenesis, adverse effects on reproduction and development, effects on xenobiotic metabolism, modulation of hormone systems, DNA reactivity, and adaptive stress responses are considered the most relevant toxicological endpoints. An evaluation procedure of the applicability and performance of in vitro bioassays for water quality monitoring, based on existing information, has been developed, which can be expanded with guidelines for experimental evaluations. In addition, a methodology for the interpretation of in vitro monitoring data is required, because the sensitivity of specific in vitro bioassays in combination with sample concentration may lead to responses of chemicals (far) below exposure concentrations that are relevant for human health effects. Different approaches are proposed to derive effect-based trigger values (EBTs), including EBTs based on (1) relative ecotoxicity potency, (2) health-based threshold values for chronic exposure in humans and kinetics of reference chemicals, and (3) read-across from (drinking) water guideline values. Effects-based trigger values need to be chosen carefully in order to be sufficiently but not overly conservative to indicate potential health effects. Consensus on the crucial steps in the selection and interpretation of in vitro bioassay data will facilitate implementation and legal embedding in the context of water quality monitoring of such assays in EBM strategies. Integr Environ Assess Manag 2019;15:126-134. © 2018 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

UV Induced Mutagenicity in Water: Causes, Detection, Identification and Prevention

At first it seemed that UV processes for disinfection and advanced oxidation were "harmless", as they didn't involve the addition of "dangerous" chemicals nor seemed to result in the formation of toxic byproducts. However, recently it has become clear that also during UV processes mutagentic/genotoxic byproducts may be formed. It was found that these are nitrogen containing aromatic compounds, which are formed by the reaction of photolysis products of nitrate with (photolysis products of) natural organic matter. Now more has become clear on the formation process of these compounds, it is possible to limit or even prevent their formation during e.g. UV/H₂O₂ processes. Besides, it appears to be possible to remove such byproducts by means of filtration processes. Thus, UV based processes can safely be applied in water treatment.

Nontarget Analysis Reveals a Bacterial Metabolite of Pyrene Implicated in the Genotoxicity of Contaminated Soil after Bioremediation

Bioremediation is an accepted technology for cleanup of soil contaminated with polycyclic aromatic hydrocarbons (PAHs), but it can increase the genotoxicity of the soil despite removal of the regulated PAHs. Although polar biotransformation products have been implicated as causative genotoxic agents, no specific product has been identified. We pursued a nontarget analytical approach combining effect-directed analysis (EDA) and metabolite profiling to compare extracts of PAH-contaminated soil from a former manufactured-gas plant site before and after treatment in a laboratory-scale aerobic bioreactor. A compound with the composition C₁₅H₈O₂ and four methylated homologues were shown to accumulate as a result of bioreactor treatment, and the C₁₅H₈O₂ compound purified from soil extracts was determined to be genotoxic. Its structure was established by nuclear magnetic resonance and mass spectroscopy as a heretofore unidentified α,β-unsaturated lactone derived from dioxygenation of pyrene at an apical ring, 2H-naphtho[2,1,8-def]chromen-2-one (NCO), which was confirmed by synthesis. The concentration of NCO in the bioreactor was 11 μg g^-1 dry soil, corresponding to 13% of the pyrene removed. It also accumulated in aerobically incubated soil from two additional PAH-contaminated sites and was formed from pyrene by two pyrene-degrading bacterial cultures known to be geographically widespread, underscoring its potential environmental significance.